https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r84474 | russell | 2007-10-02 15:06:07 -0500 (Tue, 02 Oct 2007) | 5 lines
* Don't build the menuselect-tree for the tarball, as it requires running the
configure script first
* Change the Makefile to note that menuselect-tree depends on the configure
script.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@84475 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r84291 | qwell | 2007-10-01 16:52:45 -0500 (Mon, 01 Oct 2007) | 6 lines
Add dist-clean support for subdirs.
Change h323 to only remove the Makefile on a dist-clean, rather than a clean.
This fixes a bug I found with trying to run make after a make clean
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@84300 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r80257 | russell | 2007-08-22 11:21:58 -0500 (Wed, 22 Aug 2007) | 4 lines
Honor the contents of the COPTS variable as custom target CFLAGS. Apparently
this is what openwrt does.
(reported by Brian Capouch on the asterisk-dev list, patch by me)
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@80258 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r77410 | russell | 2007-07-26 16:23:23 -0500 (Thu, 26 Jul 2007) | 10 lines
AST_DEVMODE was defined in trunk, but not in 1.4. When Asterisk is compiled
under dev mode, AST_DEVMODE will get defined in buildopts.h. Change 1.4 to
define it in the same way that trunk does. Also, revert the change that added
this define in the Makefile
The advantage to doing it this way is that buildopts.h gets installed when
you install Asterisk. Then, when building any out of tree modules, or
building asterisk-addons, these modules know which options the rest of Asterisk
was built with.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@77411 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r77380 | mmichelson | 2007-07-26 15:35:17 -0500 (Thu, 26 Jul 2007) | 7 lines
Fixes to get ast_backtrace working properly. The AST_DEVMODE macro was never defined so the majority of ast_backtrace never
attempted compilation. The makefile now defines AST_DEVMODE if configure was run with --enable-dev-mode. Also, changes were
made to acccomodate 64 bit systems in ast_backtrace.
Thanks to qwell, kpfleming, and Corydon76 for their roles in allowing me to get this committed
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@77381 65c4cc65-6c06-0410-ace0-fbb531ad65f3
* Add a Makefile in doc/tex/ for generating PDF and HTML
* Add a README.txt file to doc/tex/ to document which tools are used and what
web sites to visit for getting them.
* Update build_tools/prep_tarball to put the proper Asterisk version string
in the automatically generated PDF for release tarballs
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@72982 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This checks for it in configure, and only uses it if it's available.
If it's wrong, somebody please yell at me and tell me why.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@72539 65c4cc65-6c06-0410-ace0-fbb531ad65f3
to detect declarations in the middle of a block.
Approved by: Russel, Kevin
The fallout will be fixed in separate commits.
I am doing this only on trunk only for the time being, because 1.4
still requires a bit more polishing to give a clean compile
(at least on FreeBSD).
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@72452 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When enabled, it will set the systemname to be the hostname of the system
Issue 9713, patch by Juggie - slightly modified by me, to "failover" to localhost
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@63967 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r63535 | russell | 2007-05-09 08:24:03 -0500 (Wed, 09 May 2007) | 6 lines
I have seen multiple people post questions trying to figure out what the
message "The configure script must be executed before running 'make'" means.
So, add another like that says to specifically run ./configure. If this isn't
obvious enough, then they should be using something like AsteriskNOW and not
installing from source.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@63536 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r58931 | russell | 2007-03-15 17:25:12 -0500 (Thu, 15 Mar 2007) | 13 lines
Merge changes from svn/asterisk/team/russell/LaTeX_docs.
* Convert most of the doc directory into a single LaTeX formatted document
so that we can generate a PDF, HTML, or other formats from this
information.
* Add a CLI command to dump the application documentation into LaTeX format
which will only be include if the configure script is run with
--enable-dev-mode.
* The PDF turned out to be close to 1 MB, so it is not included. However, you
can simply run "make asterisk.pdf" to generate it yourself. We may include
it in release tarballs or have automatically generated ones on the web site,
but that has yet to be decided.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@58932 65c4cc65-6c06-0410-ace0-fbb531ad65f3
convert various #if expressions to #ifdef for macros that may not be defined (and where the value is not important)
Note: two of these changes are in bison generated files which is going to be inconvenient when they are regenerated
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@55329 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r51262 | russell | 2007-01-18 15:54:23 -0600 (Thu, 18 Jan 2007) | 5 lines
Ensure that the locations given to the Asterisk configure script for ncurses,
curses, termcap, or tinfo are further passed along to the editline configure
script. This fixes some cross-compilation environments.
(issue #8637, reported by ovi, patch by me)
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@51263 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r50754 | kpfleming | 2007-01-13 10:45:37 -0600 (Sat, 13 Jan 2007) | 2 lines
when building the sample greetings for maibox 1234@default during 'make samples', build a greeting for each language and file format the user selected to install with menuselect (reported by Brian Capouch on asterisk-dev)
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@50755 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
................
r50228 | russell | 2007-01-09 21:17:46 -0500 (Tue, 09 Jan 2007) | 14 lines
Merged revisions 50227 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.2
........
r50227 | russell | 2007-01-09 21:16:45 -0500 (Tue, 09 Jan 2007) | 6 lines
Make the number that represents the major version number a single digit instead
of 2. Using two digits makes it an octal number when put into version.h, which
breaks the compilation of any out of tree module that checks the version for
any version after 1.2.7 (reported by Matteo Brancaleoni on the asterisk-dev
mailing list, who gave credit to vihai for pointing it out)
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@50229 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r49098 | kpfleming | 2007-01-01 16:08:24 -0600 (Mon, 01 Jan 2007) | 2 lines
revert this change until a better solution can be found... 'env -i' was not being used properly, but even when changed to do so, this process fails during cross-compilation because the menuselect build still sees 'CC' as set to the cross-compiler
........
r49099 | kpfleming | 2007-01-01 16:48:03 -0600 (Mon, 01 Jan 2007) | 2 lines
use a simpler (and portable) method to ensure that menuselect is built as a host binary
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@49100 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r48525 | kpfleming | 2006-12-16 15:14:34 -0600 (Sat, 16 Dec 2006) | 2 lines
simplify dependency tracking system, using the compiler's built-in method for generating them, and only doing dependency tracking if developer mode is enabled via the configure script
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@48527 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r48521 | kpfleming | 2006-12-16 14:12:41 -0600 (Sat, 16 Dec 2006) | 2 lines
since we really, really have to have autoconfig.h included before all other headers (especially system headers), the Makefile will now force it to happen (this will fix build problems with files like ast_expr2f.c, where we can't control the inclusion order in the file itself)
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@48522 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r48190 | russell | 2006-12-01 18:16:28 -0500 (Fri, 01 Dec 2006) | 12 lines
FreeBSD 6.1 does not include wget by default. However, it has fetch which will
work just fine for our purposes of downloading the sounds packages. So, check
for both wget and fetch and the configure script and use what was found to
download them. If neither one was found, and sound packages are selected that
must be downloaded, the install process will print out an informative error
message indicating the situation.
Also, fix a couple places where "make" was hard coded into some output messages
by replacing them with the $(MAKE) variable.
(issue #8451, initial patch by pabelanger, with additional modifications by me)
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@48191 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r47494 | russell | 2006-11-11 10:31:08 -0500 (Sat, 11 Nov 2006) | 6 lines
Add the target "menuconfig" as an alias for the "menuselect" target. This is
just a favor to users so that if you accidentally type "make menuconfig"
instead of "make menuselect", it still works.
(inspired by a comment on IRC from wangster calling me an "especially devious
asterisk developer" for having it be menuselect instead of menuconfig. :) )
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@47495 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r44125 | russell | 2006-10-01 14:30:06 -0400 (Sun, 01 Oct 2006) | 6 lines
Fix a problem that cuased AST_DATA_DIR in defaults.h to be empty. The cause is
that since ASTDATADIR is explicitly exported using "export ASTDATADIR" at the
top of the Makefile, make no longer considers the variable "undefined", so the
Makefile can't use ?= to set ASTDATADIR if not yet set.
(issue #8063, reported by akohlsmith, fixed by me)
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@44126 65c4cc65-6c06-0410-ace0-fbb531ad65f3
- with AST_DEVMODE, building codecs/lpc10 fails because of lots
of warnings, and the configure step in editline fails as well.
Fix this by removing the -Werror in these steps.
- on FreeBSD (but probably on other platforms as well), the final
link of asterisk fails because AST_LIBS was not exported to the
subdirs Makefiles. Add a proper fix in the top-level Makefile
(a possible alternative way is to add "export AST_LIBS" near
the beginning of the file).
With this fix, i believe that some of the platform-specific
conditionals in main/Makefile are redundant (because they should
be already dealt with in the top level Makefile) but i don't
have a platform to check.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@44081 65c4cc65-6c06-0410-ace0-fbb531ad65f3
1) Solaris sed doesn't have -r, which means things like \s and \S don't work.
2) GNU sed version 4.1.2 failed on a very simple test
echo "Test Test" | sed -r -e 's/\s/x/g'
should have returned "TestxxxTest", but did not (however, 4.1.4 did?).
3) The CFLAGS were never set, so that entire line actually did nothing. Now it's useful again.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@40964 65c4cc65-6c06-0410-ace0-fbb531ad65f3
- restructured build tree and makefiles to eliminate recursion problems
- support for embedded modules
- support for static builds
- simpler cross-compilation support
- simpler module/loader interface (no exported symbols)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@40722 65c4cc65-6c06-0410-ace0-fbb531ad65f3
was not found in the user level makeopts file, the variable is defined, but
empty.
I wish we could just require GNU make 3.81 :)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@36229 65c4cc65-6c06-0410-ace0-fbb531ad65f3
level makeopts files - if MENUSELECT_CFLAGS is set to nothing in the user level
makeotps file, then the Makefile should not look in the global file at all.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@36228 65c4cc65-6c06-0410-ace0-fbb531ad65f3
"make" as the current build and some of the MENUELSELECT_CFLAGS are set in the
user or global level asterisk.makeopts file
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@36192 65c4cc65-6c06-0410-ace0-fbb531ad65f3
support the new location for zaptel.h and tonezone.h
use the dependency information output by menuselect to build Makefile rules for each module for header files and libraries
combine the common rules into a top-level Makefile.rules file
remove all (now) unnecessary stuff from subdir Makefiles
change translator API so that the newpvt() callback returns an int instead of a pointer (it no longer allocates memory)
alphabetize --with-<foo> options in configure script
enhance Net-SNMP support in configure script to provide a --with-netsnmp option
fix support for --with-pq so that if pg-config is not found when --with-pq is specified, an error will be generated
add 'optional package' usage to modules now that menuselect can output it
allow res_snmp to build by default, since the new loader changes coming soon will solve the function naming problem (and users can disable it via menuselect anyway)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@35832 65c4cc65-6c06-0410-ace0-fbb531ad65f3
subdirectory instead of a for loop
- remove the FORCE target from the main Makefile and add the couple places
I used it to the .PHONY target. .PHONY does the same thing and is a built-in
more efficient way of doing it.
- add a bunch more targets to .PHONY ...
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@35503 65c4cc65-6c06-0410-ace0-fbb531ad65f3
- add a copyright header to the build_tools Makefile
- remove 'depend' from the 'all' target in agi/ and utils/ since it is handled
by the main Makefile already
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@35479 65c4cc65-6c06-0410-ace0-fbb531ad65f3
each subdirectory.
- the shell code in the for loop doesn't have a manually catch errors from
make on a subdirectory
- you can now run something like "make apps" or "make channels" from the root
source directory
- This should allow for better support for parallel instances of make (the -j
option) since make can work on each subdirectory target in parallel
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@35436 65c4cc65-6c06-0410-ace0-fbb531ad65f3
since they are targets that do not have resulting files and are never listed
as prerequisites to real targets. Using .PHONY in this manner improves make
performance by never having to check for resulting files.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@35415 65c4cc65-6c06-0410-ace0-fbb531ad65f3
- modify ast_expr2.fl and ast_expr2.y to not try to register the file version
in a STANDALONE build
- add config.status as a dependency on testexpr2 to ensure configure is
executed before building it
- add include/asterisk/buildopts.h as a dependency for testexpr2 as well
- add -Iinclude to the gcc commands for building the testexpr2 objects so that
it can find the local asterisk headers
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@34980 65c4cc65-6c06-0410-ace0-fbb531ad65f3
directly include stdtime/localtime.o in the OBJS for asterisk, which is the
only object file for libtime
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@34629 65c4cc65-6c06-0410-ace0-fbb531ad65f3
update sounds/Makefile to download/unpack the proper files
remove all evidence of mpg123 from the main Makefile
change the sample musiconhold.conf file to use native mode instead of mp3
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@32917 65c4cc65-6c06-0410-ace0-fbb531ad65f3
option in menuselect. This is very useful for developers if you want to ensure
that all of your builds are done without optimizations.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@32434 65c4cc65-6c06-0410-ace0-fbb531ad65f3
- change references to the "scx" jitterbuffer to be called "fixed" and change
references to the "stevek" jitterbuffer to be called "adaptive", instead
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@31356 65c4cc65-6c06-0410-ace0-fbb531ad65f3
a new implementation of a fixed size jitterbuffer, as well as support for the
existing adaptive jitterbuffer implementation. (issue #3854, Slav Klenov)
Thank you very much to Slav Klenov of Securax and all of the people involved
in the testing of this feature for all of your hard work!
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@31052 65c4cc65-6c06-0410-ace0-fbb531ad65f3
forces a make clean, it has to be regenerated. This fixes the problem that
people have been seeing where the build would fail complaining about defaults.h
not being present.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@28894 65c4cc65-6c06-0410-ace0-fbb531ad65f3
instead of being added to the compiler commands. This header file will be
installed and modules built outside of the main tree will be able to use the
same build options used to build the rest of Asterisk.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@26808 65c4cc65-6c06-0410-ace0-fbb531ad65f3
ncurses is statically compiled with term info support, which is provided in
the statically compiled editline library that we are including.
(issue #6948, original patch by casper, modified to use the features
of AST_EXT_LIB)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@25611 65c4cc65-6c06-0410-ace0-fbb531ad65f3
don't put paths into the include search path when they are not needed
don't auto-rebuild the AEL bison/flex output based on make dependencies (the generated files are already checked in, and the timestamps generated by a checkout will usually cause them to be overwritten)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@23582 65c4cc65-6c06-0410-ace0-fbb531ad65f3
is utils/ so the compiler fails to find the header which is in ../
(at least on FreeBSD; this works on linux but it may be due to
differences in gmake).
For the time being, fix it by adding -I.. to the includes.
However i think a proper fix is to make sure that ast_expr2
is built using the rules in the top-level makefile instead
of those in the subdirectory.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@23535 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.2
........
r23305 | kpfleming | 2006-04-29 06:40:04 -0500 (Sat, 29 Apr 2006) | 3 lines
do installation in subdirs as a separate target (so external modules can use the Makefile more easily)
generate final messages -after- running any post-install script that may be present
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@23306 65c4cc65-6c06-0410-ace0-fbb531ad65f3
when you have channel locking issues.
(Part of the SIP transfer patch, where I had a *lot* of
channel locking problems)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@20264 65c4cc65-6c06-0410-ace0-fbb531ad65f3
- Maybe we should define proper directories for OS/X too?
- Should OpenBSD and NetBSD follow the FreeBSD rules?
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@18130 65c4cc65-6c06-0410-ace0-fbb531ad65f3
- remove unused OSREV varibale
- move various CROSS_COMPILE variables to the top and group them together
- move various PROC definitions to the top as a group
- remove usused MARCH variable
(issue #6892)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@17944 65c4cc65-6c06-0410-ace0-fbb531ad65f3
can override them.
On passing, fix a potential problem in the top level Makefile:
if a static library is not referenced by any of the core objects,
it is not linked in the main program, and will not be available
to modules, which leads to failure at runtime when the modules
are loaded.
This is the case of stdtime/localtime.o, which supplies some core
symbolx, but is only linked in as a library. Fix the problem by
linking in the object.
NOTE: this is intended as a temporary aid to replace the
existing say.c with a newer implementation. Once the
task is completed, we may decide whether or not the ast_say*()
functions should be pluggable or not and possibly revert
part of this change.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@14382 65c4cc65-6c06-0410-ace0-fbb531ad65f3
normal build. If people want this they can turn it on, and don't anyone
turn it on by default until you fix building on GCC 4.x
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@10842 65c4cc65-6c06-0410-ace0-fbb531ad65f3