https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r209838 | russell | 2009-08-01 05:59:05 -0500 (Sat, 01 Aug 2009) | 13 lines
Modify how Playtones() is used in Milliwatt() to resolve gain issue.
When Milliwatt() was changed internally to use Playtones() so that the proper
tone was used, it introduced a drop in gain in the output signal. So, use
the playtones API directly and specify a volume argument such that the output
matches the gain of the original Milliwatt() code.
(closes issue #15386)
Reported by: rue_mohr
Patches:
issue_15386.rev2.diff uploaded by russell (license 2)
Tested by: rue_mohr
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@209839 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Convert LOG_NOTICE messages about T.38 negotiation in debug level 1 messages,
clean up some looping logic, and correct an improper use of ast_free() for
freeing an ast_frame.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@209279 65c4cc65-6c06-0410-ace0-fbb531ad65f3
In receive mode, if the channel that ReceiveFAX is running on supports T.38,
we should *always* attempt to switch T.38, rather than listening for an incoming
CNG tone and only triggering on that. The channel may be using a low-bitrate
codec that distorts the CNG tone, the sending FAX endpoint may not send CNG
at all, or there could be a variety of other reasons that we don't detect it,
but in all those cases if T.38 is available we certainly want to use it.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@209256 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r208592 | russell | 2009-07-24 13:38:24 -0500 (Fri, 24 Jul 2009) | 7 lines
Do not log an ERROR if autoservice_stop() returns -1.
This does not indicate an error. A return of -1 just means that the channel
has been hung up.
(reported in #asterisk-dev)
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@208593 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Over the past couple of months, a number of issues with Asterisk
negotiating (and successfully completing) T.38 sessions with various
endpoints have been found. This patch attempts to address many of
them, primarily focused around ensuring that the endpoints'
MaxDatagram size is honored, and in addition by ensuring that T.38
session parameter negotiation is performed correctly according to the
ITU T.38 Recommendation.
The major changes here are:
1) T.38 applications in Asterisk (app_fax) only generate/receive IFP
packets, they do not ever work with UDPTL packets. As a result of
this, they cannot be allowed to generate packets that would overflow
the other endpoints' MaxDatagram size after the UDPTL stack adds any
error correction information. With this patch, the application is told
the maximum *IFP* size it can generate, based on a calculation using
the far end MaxDatagram size and the active error correction mode on
the T.38 session. The same is true for sending *our* MaxDatagram size
to the remote endpoint; it is computed from the value that the
application says it can accept (for a single IFP packet) combined with
the active error correction mode.
2) All treatment of T.38 session parameters as 'capabilities' in
chan_sip has been removed; these parameters are not at all like
audio/video stream capabilities. There are strict rules to follow for
computing an answer to a T.38 offer, and chan_sip now follows those
rules, using the desired parameters from the application (or channel)
that wants to accept the T.38 negotiation.
3) chan_sip now stores and forwards ast_control_t38_parameters
structures for tracking 'our' and 'their' T.38 session parameters;
this greatly simplifies negotiation, especially for pass-through
calls.
4) Since T.38 negotiation without specifying parameters or receiving
the final negotiated parameters is not very worthwhile, the
AST_CONTROL_T38 control frame has been removed. A note has been added
to UPGRADE.txt about this removal, since any out-of-tree applications
that use it will no longer function properly until they are upgraded
to use AST_CONTROL_T38_PARAMETERS.
Review: https://reviewboard.asterisk.org/r/310/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@208464 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This x is one crafty little bugger...
It was used for 2 different things (one of which was only done on PPC) in 1.4.
One of the uses were removed in trunk, and with it went the declaration.
(closes issue #14038)
Reported by: ffloimair
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@208113 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This helps to prevent a crash which may occur due to our freeing
garbage due to a struct being uninitialized.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@207522 65c4cc65-6c06-0410-ace0-fbb531ad65f3
If a redirecting control frame is processed or a call forward occurs,
we need to reset the sentringing flag so that we can send another ringing
indication to the phone that may contain a connected line update.
AST-164
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@206455 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The transmit_audio() and transmit_t38() functions in app_fax have processing
loops that are supposed to wait for frames to arrive on the channel and then
handle them, but they also have short timeouts so that the loops can have
watchdog timers and do other required processing. This commit changes the loops
to not actually call ast_read() and attempt to process the returned frame
unless a frame actually arrived, eliminating hundreds of LOG_DEBUG messages
and slightly improving performance.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@205780 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Revision 205696 did not quite fix all the issues with the T.38 negotiation
changes and app_fax; this patch corrects them, along with a couple of other
minor issues.
(closes issue #15480)
Reported by: dimas
Patches:
test2-15480.patch uploaded by dimas (license 88)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@205770 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Recent changes in T.38 negotiation in Asterisk caused these applications to
not respond when the other endpoint initiated a switchover to T.38; this
resulted in the T.38 switchover failing, and the FAX attempt to be made
using an audio connection, instead of T.38 (which would usually cause the
FAX to fail completely).
This patch corrects this problem, and the applications will now correctly
respond to the T.38 switchover request. In addition, the response will include
the appopriate T.38 session parameters based on what the other end offered
and what our end is capable of.
(closes issue #14849)
Reported by: afosorio
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@205696 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r205349 | mmichelson | 2009-07-08 14:26:13 -0500 (Wed, 08 Jul 2009) | 14 lines
Prevent phantom calls to queue members.
If a caller were to hang up while a periodic announcement or position
were being said, the return value for those functions would incorrectly
indicate that the caller was still in the queue. With these changes,
the problem does not occur.
(closes issue #14631)
Reported by: latinsud
Patches:
queue_announce_ghost_call2.diff uploaded by latinsud (license 745)
(with small modification from me)
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@205350 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Also, the code in this module is horrendous and we should remove it from the
tree. I'm not sure who is supposed to be maintaning this thing, but they
clearly are not. I don't see the sense of leaving it in the main tree. If it
lives *anywhere* it should be in addons.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@204143 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Max silence was represented in milliseconds, yet vmminsecs (minmessage) was represented
as seconds.
Also, the inequality was reversed. The warning, if triggered, was "Max silence should
be less than minmessage or you may get empty messages", which should have been logged
if max silence was greater than minmessage, but the check was for less than.
Also, conforming if statement to coding guidelines.
closes issue #15331)
Reported by: markd
Review: https://reviewboard.asterisk.org/r/293/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@203721 65c4cc65-6c06-0410-ace0-fbb531ad65f3
CEL is the new system for logging channel events. This was inspired after
facing many problems trying to represent what is possible to happen to a call
in Asterisk using CDR records. For more information on CEL, see the built in
HTML or PDF documentation generated from the files in doc/tex/.
Many thanks to Steve Murphy (murf) and Brian Degenhardt (bmd) for their hard
work developing this code. Also, thanks to Matt Nicholson (mnicholson) and
Sean Bright (seanbright) for their assistance in the final push to get this
code ready for Asterisk trunk.
Review: https://reviewboard.asterisk.org/r/239/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@203638 65c4cc65-6c06-0410-ace0-fbb531ad65f3
within app_voicemail for directory functions. It is therefore no longer
necessary for app_directory to be linked against the ODBC libraries (and it
never was necessary for app_directory to be linked against IMAP, though it
was).
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@201783 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r201423 | dvossel | 2009-06-17 14:28:12 -0500 (Wed, 17 Jun 2009) | 19 lines
StopMixMonitor race condition (not giving up file immediately)
StopMixMonitor only indicates to the MixMonitor thread to stop
writing to the file. It does not guarantee that the recording's
file handle is available to the dialplan immediately after execution.
This results in a race condition. To resolve this, the filestream
pointer is placed in a datastore on the channel. When StopMixMonitor
is called, the datastore is retrieved from the channel and the
filestream is closed immediately before returning to the dialplan.
Documentation indicating the use of StopMixMonitor to free files
has been updated as well.
(closes issue #15259)
Reported by: travisghansen
Tested by: dvossel
Review: https://reviewboard.asterisk.org/r/283/
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@201445 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Some applications (notably app_fax) do not need digit detection nor FAX tone
detection while they are running, and if Asterisk is using software DSPs to provide
the detection, this consumes extra CPU cycles that could be better spent on the
actual application. This patch allows applications to query and control the state
of digit and tone detection on a channel, and modifies app_fax to disable them
while the FAX operations are occurring (and re-enable digit detection afterwards).
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@201139 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r200991 | kpfleming | 2009-06-16 12:05:38 -0500 (Tue, 16 Jun 2009) | 11 lines
Improve support for media paths that can generate multiple frames at once.
There are various media paths in Asterisk (codec translators and UDPTL, primarily)
that can generate more than one frame to be generated when the application calling
them expects only a single frame. This patch addresses a number of those cases,
at least the primary ones to solve the known problems. In addition it removes the
broken TRACE_FRAMES support, fixes a number of bugs in various frame-related API
functions, and cleans up various code paths affected by these changes.
https://reviewboard.asterisk.org/r/175/
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@201056 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Voicemail can only use one storage module at the moment.
Because it's unclear that selecting one of the storage modules
in menuselect will disable filesystem storage we now have
a FILE_STORAGE option that conflicts with the other modules.
(closes issue #15333)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@200943 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Fix up modules in the 'apps' directory, and also correct the bad example of
enum definitions in include/asterisk/app.h, which many developers followed
(thanks for reading the documentation!). In addition, add some basic usage
examples of the 'pahole' and 'pglobal' tools to the coding guidelines.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@200656 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch provides a new implementation of the optional API support defined
in asterisk/optional_api.h; this new version provides solves compatibility
issues with the use of linker version scripts for suppressing global symbols.
In addition, there is now a functional (and tested!) implementation for Mac OS/X,
so module writers no longer need to use special tests before calling optional
API functions. All future implementations must provide these same semantics,
so that module writers can rely on them.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@200519 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Move function MEETME_INFO static documentation to the new AstXML form.
(issue #15245)
Reported by: eliel
Patches:
app_meetme_static_conversion.txt uploaded by lmadsen (license 10)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@199409 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Move function MINIVMACCOUNT and MINIVMCOUNTER statis documentation to the new
AstXML form.
(issue #15245)
Reported by: eliel
Patches:
app_minivm_static_conversion.txt uploaded by lmadsen (license 10)
(with minor changes by me)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@199376 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Russell Bryant
David Brooks
Kevin P. Fleming
Jason Parker
Mark Michelson
Tilghman Lesher
Sean Bright
Joshua Colp
David Vossel
Michiel van Baak
Eliel C. Sardanons