A potential problem that can arise is the following:
* Bob's phone is programmed to automatically forward to Carol.
* Carol's phone is programmed to automatically forward to Bob.
* Alice calls Bob.
If left unchecked, this results in an endless loops of call forwards
that would eventually result in some sort of fiery crash.
Asterisk's method of solving this issue was to track which interfaces
had been dialed. If a destination were dialed a second time, then
the attempt to call that destination would fail since a loop was
detected.
The problem with this method is that call forwarding has evolved. Some
SIP phones allow for a user to manually forward an incoming call to an
ad-hoc destination. This can mean that:
* There are legitimate use cases where a device may be dialed multiple
times, or
* There can be human error when forwarding calls.
This change removes the old method of detecting forwarding loops in
favor of keeping a count of the number of destinations a channel has
dialed on a particular branch of a call. If the number exceeds the
set number of max forwards, then the call fails. This approach has
the following advantages over the old:
* It is much simpler.
* It can detect loops involving local channels.
* It is user configurable.
The only disadvantage it has is that in the case where there is a
legitimate forwarding loop present, it takes longer to detect it.
However, the forwarding loop is still properly detected and the
call is cleaned up as it should be.
Address review feedback on gerrit.
* Correct "mfgium" to "Digium"
* Decrement max forwards by one in the case where allocation of the
max forwards datastore is required.
* Remove irrelevant code change from pjsip_global_headers.c
ASTERISK-24958 #close
Change-Id: Ia7e4b7cd3bccfbd34d9a859838356931bba56c23
This new macro allows a single line to add all additional
sources to a module. This helps prevent modules from
missing steps, and makes future changes easier since
they can be made in a single place.
ASTERISK-24960 #close
Reported by: Corey Farrell
Change-Id: I38f12d8b72c5e7bb37a879b2fb51761a2855eb4b
Git does not support the ability to replace a token with a version
string during check-in. While it does have support for replacing a
token on clone, this is somewhat sub-optimal: the token is replaced
with the object hash, which is not particularly easy for human
consumption. What's more, in practice, the source file version was often
not terribly useful. Generally, when triaging bugs, the overall version
of Asterisk is far more useful than an individual SVN version of a file. As a
result, this patch removes Asterisk's support for showing source file
versions.
Specifically, it does the following:
* Rename ASTERISK_FILE_VERSION macro to ASTERISK_REGISTER_FILE, and
remove passing the version in with the macro. Other facilities
than 'core show file version' make use of the file names, such as
setting a debug level only on a specific file. As such, the act of
registering source files with the Asterisk core still has use. The
macro rename now reflects the new macro purpose.
* main/asterisk:
- Refactor the file_version structure to reflect that it no longer
tracks a version field.
- Remove the "core show file version" CLI command. Without the file
version, it is no longer useful.
- Remove the ast_file_version_find function. The file version is no
longer tracked.
- Rename ast_register_file_version/ast_unregister_file_version to
ast_register_file/ast_unregister_file, respectively.
* main/manager: Remove value from the Version key of the ModuleCheck
Action. The actual key itself has not been removed, as doing so would
absolutely constitute a backwards incompatible change. However, since
the file version is no longer tracked, there is no need to attempt to
include it in the Version key.
* UPGRADE: Add notes for:
- Modification to the ModuleCheck AMI Action
- Removal of the "core show file version" CLI command
Change-Id: I6cf0ff280e1668bf4957dc21f32a5ff43444a40e
Although it only occurred once, a crash occurred when a queue attempted to
evaluate a queue penalty rule that appeared to have already been destroyed.
In many locations in app_queue, a test is done to see if qe->pr is NULL;
however, when we dispose of a queue's penalty rules, we don't set the pointer
to NULL after free'ing it. This patch does that to prevent any dangling
pointers from lingering on the queue object.
Review: https://reviewboard.asterisk.org/r/4522
ASTERISK-23319 #close
Reported by: Vadim
patches:
rb4552.patch submitted by Stefan Engström (License 6691)
........
Merged revisions 434448 from http://svn.asterisk.org/svn/asterisk/branches/11
........
Merged revisions 434449 from http://svn.asterisk.org/svn/asterisk/branches/13
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@434450 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch fixes several warnings pointed out by the clang compiler.
* chan_pjsip: Removed check for data->text, as it will always be non-NULL.
* app_minivm: Fixed evaluation of etemplate->locale, which will always
evaluate to 'true'. This patch changes the evaluation to use
ast_strlen_zero.
* app_queue:
- Fixed evaluation of qe->parent->monfmt, which always evaluates to
true. Instead, we just check to see if the dereferenced pointer
evaluates to true.
- Fixed evaluation of mem->state_interface, wrapping it with a call to
ast_strlen_zero.
* res_smdi: Wrapped search_msg->mesg_desk_term with calls to ast_strlen_zero.
Review: https://reviewboard.asterisk.org/r/4541
ASTERISK-24917
Reported by: dkdegroot
patches:
rb4541.patch submitted by dkdegroot (License 6600)
........
Merged revisions 434285 from http://svn.asterisk.org/svn/asterisk/branches/11
........
Merged revisions 434286 from http://svn.asterisk.org/svn/asterisk/branches/13
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@434287 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When an error occurs while writing to a web socket, the web socket is
disconnected and the event is logged. A side-effect of this, however, is that
any application on the other side waiting for a response from Stasis is left
hanging indefinitely (as there is no mechanism presently available for
notifying interested parties about web socket error states in Stasis).
To remedy this scenario, this patch introduces a new channel variable:
STASISSTATUS.
The possible values for STASISSTATUS are:
SUCCESS - The channel has exited Stasis without any failures
FAILED - Something caused Stasis to croak. Some (not all) possible
reasons for this:
- The app registry is not instantiated;
- The app requested is not registered;
- The app requested is not active;
- Stasis couldn't send a start message
ASTERISK-24802
Reported By: Kevin Harwell
Review: https://reviewboard.asterisk.org/r/4519/
........
Merged revisions 433839 from http://svn.asterisk.org/svn/asterisk/branches/13
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@433845 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Attempting to execute DTMF in a confbridge while file playback (prompt,
announcement, etc) is occurring is not allowed. You have to wait until
the sound file has completed before entering DTMF. This patch fixes it
so that app_confbridge now monitors for dtmf key presses during menu
driven file playback. If a key is pressed playback stops and it executes
the matched menu option.
ASTERISK-24864 #close
Reported by: Steve Pitts
Review: https://reviewboard.asterisk.org/r/4510/
........
Merged revisions 433445 from http://svn.asterisk.org/svn/asterisk/branches/11
........
Merged revisions 433446 from http://svn.asterisk.org/svn/asterisk/branches/13
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@433447 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Valgrind found some memory leaks associated with ast_sockaddr_resolve().
Most of the leaks had already been fixed by earlier memory leak hunt
patches. This patch performs an audit of ast_sockaddr_resolve() and found
one more.
* Fix ast_sockaddr_resolve() memory leak in
apps/app_externalivr.c:app_exec().
* Made main/netsock2.c:ast_sockaddr_resolve() always set the addrs
parameter for safety so the pointer will never be uninitialized on return.
The same goes for res/res_pjsip_acl.c:extract_contact_addr().
* Made functions that call ast_sockaddr_resolve() with RAII_VAR()
controlling the addrs variable use ast_free instead of ast_free_ptr to
provide better MALLOC_DEBUG information.
Review: https://reviewboard.asterisk.org/r/4509/
........
Merged revisions 433056 from http://svn.asterisk.org/svn/asterisk/branches/11
........
Merged revisions 433057 from http://svn.asterisk.org/svn/asterisk/branches/13
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@433058 65c4cc65-6c06-0410-ace0-fbb531ad65f3
In some countries, privacy laws specify that SMS content cannot be saved by a
provider. This patch adds a new option to the SMS application, 'n', which
prevents the SMS content from being written to the SMS log.
ASTERISK-22591 #close
Reported by: Jan Juergens
patches:
DisableSmsContentLoggingByParam.patch uploaded by Jan Juergens (License 6538)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@432947 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch corrects the documentation for the AMD application. Specifically:
* It documents the maximum_word_length option, which limits the maximum allowed
length of a single utterance.
* It clarifies the AMDCAUSE values MAXWORDS and MAXWORDLENGTH. MAXWORDLENGTH
was documented as MAXWORDS, while MAXWORDS was undocumented.
Thanks to the issue reporter, Frank DiGennaro, for pointing out the issues.
ASTERISK-19470 #close
Reported by: Frank DiGennaro
........
Merged revisions 432918 from http://svn.asterisk.org/svn/asterisk/branches/11
........
Merged revisions 432920 from http://svn.asterisk.org/svn/asterisk/branches/13
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@432921 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Switch logger callid's from AO2 objects to simple integers.
This helps in two ways. Copying integers is faster than
referencing AO2 objects, so this will result in a small
reduction in logger overhead. This also erases the possibility
of an infinate loop caused by an invalid callid in
threadstorage.
ASTERISK-24833 #comment Committed callid conversion to trunk.
Reported by: Corey Farrell
Review: https://reviewboard.asterisk.org/r/4466/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@432834 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When an IMAP backend is in use and greetings are set to be used, but aren't
present for a user in their IMAP folder, Asterisk will crash. This occurs
due to the mailstream being set to the 'greetings' folder and being left
in that particular state, regardless of the success/failure of the attempt
to access the folder the mailstream points to. Later access of the mailstream
assumes that it points to the 'INBOX' (or some other folder), resulting in
either a crash (if the greetings folder didn't exist and the mailstream is
invalid) or an inability to read messages from the 'INBOX' folder.
This patch restores the mailstream to its correct state after accessing the
greetings. This fixes the crash, and sets the mailstream to the state that
VoiceMailMain expects.
Note that while ASTERISK-23390 also contained a patch for this issue, the
patch on ASTERISK-24786 is the one being merged here.
Review: https://reviewboard.asterisk.org/r/4459/
ASTERISK-23390 #close
Reported by: Ben Smithurst
ASTERISK-24786 #close
Reported by: Graham Barnett
Tested by: Graham Barnett
patches:
app_voicemail.c.patch.SIGSEGV3rev2 uploaded by Graham Barnett (License 6685)
........
Merged revisions 432695 from http://svn.asterisk.org/svn/asterisk/branches/11
........
Merged revisions 432696 from http://svn.asterisk.org/svn/asterisk/branches/13
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@432697 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When using IMAP voicemail with FreePBX, you will often get ERROR messages
complaining about not being able to find a mailbox. This is due to how FreePBX
handles voicemail mailboxes. Unfortunately, app_voicemail has to consider this
a configuration error, as in any other system it would be indicative of
someone misconfiguring their system.
Regardless, a misconfiguration is a WARNING, and not an ERROR. This patch
demotes the message so that system administrators can hopefully reduce some
of the noise in their log files.
Note that in the original patch this was made into a NOTICE, but that's a
too forgiving.
ASTERISK-24790 #close
Reported by: Graham Barnett
patches:
app_voicemail.c.patch_noise uploaded by Graham Barnett (License 6685)
........
Merged revisions 432098 from http://svn.asterisk.org/svn/asterisk/branches/11
........
Merged revisions 432099 from http://svn.asterisk.org/svn/asterisk/branches/13
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@432100 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When interfacing with Microsoft Exchange, custom headers will be returned as
all lower case. Currently, the IMAP header code will fail to parse the returned
custom headers, as it will be performing a case sensitive comparison. This can
cause playback of messages to fail, as needed information - such as origtime -
will not be present.
This patch updates app_voicemail's header parsing code to perform a case
insensitive lookup for the requested custom headers. Since the headers are
specific to Asterisk, e.g., 'x-asterisk-vm-orig-time', and headers should be
unique in an IMAP message, this should cause no issues with other systems.
ASTERISK-24787 #close
Reported by: Graham Barnett
patches:
app_voicemail.c.patch_MSExchange uploaded by Graham Barnett (License 6685)
........
Merged revisions 432012 from http://svn.asterisk.org/svn/asterisk/branches/11
........
Merged revisions 432013 from http://svn.asterisk.org/svn/asterisk/branches/13
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@432014 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The Test Event for MIXMONITOR_END - which signals that a MixMonitor has
completed - technically fired before the filestream was closed. If a test
used this to trigger a condition to verify that the file was written, it
could result in a race condition where the file size would not be what the
test expected.
Luckily, no tests were using this (although they should have been). Since the
test event needed to be moved after the point where the MixMonitor autochan has
been destroyed, the test event no longer emits the channel name. Luckily,
nothing needs it.
........
Merged revisions 431788 from http://svn.asterisk.org/svn/asterisk/branches/11
........
Merged revisions 431789 from http://svn.asterisk.org/svn/asterisk/branches/13
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@431790 65c4cc65-6c06-0410-ace0-fbb531ad65f3
There are three CLI commands to stop and restart Asterisk each.
1) core stop/restart now - Hangup all calls and stop or restart Asterisk.
New channels are prevented while the shutdown request is pending.
2) core stop/restart gracefully - Stop or restart Asterisk when there are
no calls remaining in the system. New channels are prevented while the
shutdown request is pending.
3) core stop/restart when convenient - Stop or restart Asterisk when there
are no calls in the system. New calls are not prevented while the
shutdown request is pending.
ARI has made stopping/restarting Asterisk more problematic. While a
shutdown request is pending it is desirable to continue to process ARI
HTTP requests for current calls. To handle the current calls while a
shutdown request is pending, a new committed to shutdown phase is needed
so ARI applications can deal with the calls until the system is fully
committed to shutdown.
* Added a new shutdown committed phase so ARI applications can deal with
calls until the final committed to shutdown phase is reached.
* Made refuse new HTTP requests when the system has reached the final
system shutdown phase. Starting anything while the system is actively
releasing resources and unloading modules is not a good thing.
* Split the bridging framework shutdown to not cleanup the global bridging
containers when shutting down in a hurry. This is similar to how other
modules prevent crashes on rapid system shutdown.
* Moved ast_begin_shutdown(), ast_cancel_shutdown(), and
ast_shutting_down(). You should not have to include channel.h just to
access these system functions.
ASTERISK-24752 #close
Reported by: Matthew Jordan
Review: https://reviewboard.asterisk.org/r/4399/
........
Merged revisions 431692 from http://svn.asterisk.org/svn/asterisk/branches/13
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@431694 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When the app_agent_pool module initially loads there is a race condition
between the thread loading agents.conf and the device state internal
processing thread. If the device state internal processing thread handles
the agent creation state updates before the thread that loaded agents.conf
registers the device state provider callback then the cached agent state
is "Invalid". When a consumer module like app_queue asks for the agent state
it gets the cached "Invalid" state instead of the real state from the provider.
* Moved loading the agents.conf configuration to the last thing setup by
app_agent_pool in load_module(). Now the device state provider callback
is registered before the config is loaded so the agent creation state
updates are guaranteed to get the initial device state.
* Removed some now redundant config cleanup on error in load_config().
* Added lock protection when accessing the device state in
agent_pvt_devstate_get() and eliminated the RAII_VAR() usage.
ASTERISK-24737 #close
Reported by: Steve Pitts
Review: https://reviewboard.asterisk.org/r/4390/
........
Merged revisions 431492 from http://svn.asterisk.org/svn/asterisk/branches/13
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@431493 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When issuing a 'confbridge list XXXX' CLI command, the resulting output no
longer displays the menu associated with a ConfBridge participant.
The issue was caused by ASTERISK-22760. When that patch was done, it removed
the copying of the menu name associated with the user from the actual user
profile.
This patch fixes the issue by copying the menu name over to the user profile
when the menu hooks are applied to the user. Since that function now does a
little bit more than just apply the hooks, the name of the function has been
changed to cover the copying of the menu name over as well.
In addition, there is a disparity between the menu name length as it is stored
on the conf_menu structure and the confbridge_user structure; this patch makes
the lengths match so that a strcpy can be used.
Review: https://reviewboard.asterisk.org/r/4372/
ASTERISK-24723 #close
Reported by: Steve Pitts
........
Merged revisions 431134 from http://svn.asterisk.org/svn/asterisk/branches/13
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@431136 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Channel names should be different from other channels in the system while
the channel exists.
* Use a sequence number for CBRec channels instead of a random number
because the same random number could be picked again for the next CBRec
channel.
........
Merged revisions 431052 from http://svn.asterisk.org/svn/asterisk/branches/13
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@431053 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The MixMonitor m() option allows a recording to be pushed to a specific
voicemail mailbox. If the message is delivered to the mailbox's INBOX, however,
no MWI notification is currently raised.
This patch corrects the issue by properly calling notify_new_state from the
msg_create_from_file function. This will cause MWI to be triggered if the
message was placed in the mailbox's INBOX.
ASTERISK-24709 #close
Reported by: Gareth Palmer
patches:
app_voicemail-430919.patch uploaded by Gareth Palmer (License 5169)
........
Merged revisions 430920 from http://svn.asterisk.org/svn/asterisk/branches/11
........
Merged revisions 430921 from http://svn.asterisk.org/svn/asterisk/branches/13
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@430922 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The Dial application has some interesting options with the mid-call Macro (M)
and GoSub (U) options. If the MACRO_RESULT/GOSUB_RESULT returns specific
values, the Dial application will take some action upon the channels involved
in the dial operation (such as hanging up a particular party, etc.) The Dial
application ensures that a Stasis message is published in the event that
MACRO_RESULT/GOSUB_RESULT returns a value that kills the dial operation, so
that there is a corresponding DialEnd event published in AMI/ARI for the
DialBegin event that preceeded it.
A bug exists where that same DialEnd event will be published on Stasis even if
the value returned in MACRO_RESULT/GOSUB_RESULT is not one that the Dial
application cares about. This causes two DialEnd events to be published - one
with the MACRO_RESULT/GOSUB_RESULT and another with "ANSWERED" - which is all
sorts of wrong.
This patch fixes the bug by ensuring that we only publish a DialEnd message to
Stasis if the Dial application's mid-call Macro/GoSub returns something that
Dial cares about.
Review: https://reviewboard.asterisk.org/r/4336
ASTERISK-24682 #close
Reported by: Matt Jordan
........
Merged revisions 430842 from http://svn.asterisk.org/svn/asterisk/branches/13
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@430844 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When using ODBC or IMAP storage, temporary files created on the file system
must be disposed of using the DISPOSE macro. The DELETE macro will map to a
deletion function for the backend storage, but does not clean up any local
files created as a result of the operation.
When using voicemail with the operator and review options enabled, pressing
0 to enter the menu, followed by 1 to save the message, followed by any
other DTMF press to delete the message, will result in the temporary file
lingering on the file system.
This patch properly calls DISPOSE after the DELETE. This causes the local
file to be disposed of.
ASTERISK-24288 #close
Reported by: LEI FU
patches:
voicemail_odbc_review_fix.diff uploaded by LEI FU (License 6640)
........
Merged revisions 430795 from http://svn.asterisk.org/svn/asterisk/branches/11
........
Merged revisions 430796 from http://svn.asterisk.org/svn/asterisk/branches/13
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@430797 65c4cc65-6c06-0410-ace0-fbb531ad65f3
v11: If a channel redirect to a macro exten of a macro that is active
happens, the redirect location doesn't get executed. Instead the original
macro location is restored and gets reexecuted.
v13: An additional effect happens if a parked call times out to an
extension in the macro that parked the call then the macro is reexecuted
instead of the expected park return location.
* Made not restore the macro calling location on an
AST_SOFTHANGUP_ASYNCGOTO.
* Increased the locked channel range when setting up the macro execution
environment to cover things that should be done while the channel is
locked.
* Removed unnecessary NULL tests before calling ast_free() in
_macro_exec().
ASTERISK-23850 #close
Reported by: Andrew Nagy
Review: https://reviewboard.asterisk.org/r/4292/
........
Merged revisions 430564 from http://svn.asterisk.org/svn/asterisk/branches/11
........
Merged revisions 430565 from http://svn.asterisk.org/svn/asterisk/branches/13
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@430567 65c4cc65-6c06-0410-ace0-fbb531ad65f3
* Made the following AMI actions use list API calls for consistency:
Agents
BridgeInfo
BridgeList
BridgeTechnologyList
ConfbridgeLIst
ConfbridgeLIstRooms
CoreShowChannels
DAHDIShowChannels
DBGet
DeviceStateList
ExtensionStateList
FAXSessions
Hangup
IAXpeerlist
IAXpeers
IAXregistry
MeetmeList
MeetmeListRooms
MWIGet
ParkedCalls
Parkinglots
PJSIPShowEndpoint
PJSIPShowEndpoints
PJSIPShowRegistrationsInbound
PJSIPShowRegistrationsOutbound
PJSIPShowResourceLists
PJSIPShowSubscriptionsInbound
PJSIPShowSubscriptionsOutbound
PresenceStateList
PRIShowSpans
QueueStatus
QueueSummary
ShowDialPlan
SIPpeers
SIPpeerstatus
SIPshowregistry
SKINNYdevices
SKINNYlines
Status
VoicemailUsersList
* Incremented the AMI version to 2.7.0.
* Changed astman_send_listack() to not use the listflag parameter and
always set the value to "Start" so the start capitalization is consistent.
i.e., The FAXSessions used "Start" while the rest of the system used
"start". The corresponding complete event always used "Complete".
* Fixed ami_show_resource_lists() "PJSIPShowResourceLists" to output the
AMI ActionID for all of its list events.
* Fixed off-nominal AMI protocol error in manager_bridge_info(),
manager_parking_status_single_lot(), and
manager_parking_status_all_lots(). Use of astman_send_error() after
responding to the original AMI action request violates the action response
pattern by sending two responses.
* Fixed minor protocol error in action_getconfig() when no requested
categories are found. Each line needs to be formatted as "Header: text".
* Fixed off-nominal memory leak in manager_build_parked_call_string().
* Eliminated unnecessary use of RAII_VAR() in ami_subscription_detail().
ASTERISK-24049 #close
Reported by: Jonathan Rose
Review: https://reviewboard.asterisk.org/r/4315/
........
Merged revisions 430434 from http://svn.asterisk.org/svn/asterisk/branches/13
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@430435 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch adds the ability to pass options and a command to MixMontor when
recording a conference using ConfBridge.
New options are -
* record_options: Options to MixMontor, eg: m(), W() etc.
* record_command: The command to execute when recording is over.
* record_file_timestamp: Append the start time to the file name.
These options can also be used with the CONFBRIDGE function, e.g.,
Set(CONFBRIDGE(bridge,record_command)=/path/to/command ^{MIXMONITOR_FILENAME}))
Review: https://reviewboard.asterisk.org/r/4023
ASTERISK-24351 #close
Reported by: Gareth Palmer
patches:
record_command-428838.patch uploaded by Gareth Palmer (License 5169)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@429934 65c4cc65-6c06-0410-ace0-fbb531ad65f3
In r413586 (1.8) various casts were added to silence gcc 4.10 warnings.
Those fixes included things like:
-out += sprintf(out, "%%%02X", (unsigned char) *ptr);
+out += sprintf(out, "%%%02X", (unsigned) *ptr);
That works for low ascii characters, but for the high range that yields
e.g. FFFFFFC3 when C3 is expected.
This changeset:
- fixes those casts to use the 'hh' unsigned char modifier instead
- consistently uses %02x instead of %2.2x (or other non-standard usage)
- adds a few 'h' modifiers in various places
- fixes a 'replcaes' typo
- dev/urandon typo (in 13+ patch)
Review: https://reviewboard.asterisk.org/r/4263/
ASTERISK-24619 #close
Reported by: Stefan27 (on IRC)
........
Merged revisions 429673 from http://svn.asterisk.org/svn/asterisk/branches/11
........
Merged revisions 429674 from http://svn.asterisk.org/svn/asterisk/branches/12
........
Merged revisions 429675 from http://svn.asterisk.org/svn/asterisk/branches/13
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@429683 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The UW IMAP library is instrinsically not thread-safe, and relies upon higher
level applications to guarantee thread safety. For the most part, this is
provided by the vms object, which provides locking for individual streams.
Unfortunately, this is not sufficient for calls to mail_open which create the
IMAP stream. mail_open can, on some systems, call into a UW IMAP specific
function for determining the address of a system based on a hostname,
ip_nametoaddr.
In the ip6_unix implementation of this function, static variables are used
to hold parsing buffers. This can cause a crash if multiple threads attempt
to convert a hostname to an address at the same time. Locking on a single
mail stream is not sufficient to prevent simultaneous access to these static
variables.
In the IMAP library, this function can be called from the mail_open and
imap_status functions. As the imap_status function is not used by
app_voicemail, locking on access to mail_open is sufficient to prevent
any mangling of the buffers.
Review: https://reviewboard.asterisk.org/r/4188/
ASTERISK-24516 #close
Reported by: David Duncan Ross Palmer
Tested by: David Duncan Ross Palmer
patches:
ASTERISK-24516.diff uploaded by David Duncan Ross Palmer (License 6660)
........
Merged revisions 428863 from http://svn.asterisk.org/svn/asterisk/branches/11
........
Merged revisions 428864 from http://svn.asterisk.org/svn/asterisk/branches/12
........
Merged revisions 428865 from http://svn.asterisk.org/svn/asterisk/branches/13
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@428866 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Prior to this patch, all Stasis subscriptions would receive a dedicated
thread for servicing published messages. In contrast, prior to r400178
(see review https://reviewboard.asterisk.org/r/2881/), the subscriptions
shared a thread pool. It was discovered during some initial work on Stasis
that, for a low subscription count with high message throughput, the
threadpool was not as performant as simply having a dedicated thread per
subscriber.
For situations where a subscriber receives a substantial number of messages
and is always present, the model of having a dedicated thread per subscriber
makes sense. While we still have plenty of subscriptions that would follow
this model, e.g., AMI, CDRs, CEL, etc., there are plenty that also fall into
the following two categories:
* Large number of subscriptions, specifically those tied to endpoints/peers.
* Low number of messages. Some subscriptions exist specifically to coordinate
a single message - the subscription is created, a message is published, the
delivery is synchronized, and the subscription is destroyed.
In both of the latter two cases, creating a dedicated thread is wasteful (and
in the case of a large number of peers/endpoints, harmful). In those cases,
having shared delivery threads is far more performant.
This patch adds the ability of a subscriber to Stasis to choose whether or not
their messages are dispatched on a dedicated thread or on a threadpool. The
threadpool is configurable through stasis.conf.
Review: https://reviewboard.asterisk.org/r/4193
ASTERISK-24533 #close
Reported by: xrobau
Tested by: xrobau
........
Merged revisions 428681 from http://svn.asterisk.org/svn/asterisk/branches/12
........
Merged revisions 428687 from http://svn.asterisk.org/svn/asterisk/branches/13
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@428688 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Confbridge dialplan function permission escalation via AMI and inappropriate
class authorization on the ConfbridgeStartRecord action. The CONFBRIDGE dialplan
function when executed from an external protocol (for instance AMI), could
result in a privilege escalation. Also, the AMI action “ConfbridgeStartRecord”
could also be used to execute arbitrary system commands without first checking
for system access. The AMI “ConfbridgeStopRecord” has also been updated to
only run under a system authorization.
Asterisk now inhibits the CONFBRIDGE function from being executed from an
external interface if the live_dangerously option is set to no. Also, the
“ConfbridgeStartRecord” AMI action is now only allowed to execute under a
user with system level access.
ASTERISK-24490
Reported by: Gareth Palmer
........
Merged revisions 428332 from http://svn.asterisk.org/svn/asterisk/branches/11
........
Merged revisions 428334 from http://svn.asterisk.org/svn/asterisk/branches/12
........
Merged revisions 428339 from http://svn.asterisk.org/svn/asterisk/branches/13
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@428342 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When r428077 was made for ASTERISK-24522, it failed to take into account users
who are neither wait_marked nor end_marked. These users are *also* supposed to
hear the 'leader has left the conference' message. Granted, this behaviour is
a bit odd; however, that is how it used to work... and behaviour changes are
not good.
This patch ensures that if there are any 'normal' users present when the last
marked user leaves the conference, the message will still be played to them.
Note that this regression was caught by the Asterisk Test Suite's
confbridge_nominal test, which has a quirky combination of users.
........
Merged revisions 428113 from http://svn.asterisk.org/svn/asterisk/branches/11
........
Merged revisions 428114 from http://svn.asterisk.org/svn/asterisk/branches/12
........
Merged revisions 428115 from http://svn.asterisk.org/svn/asterisk/branches/13
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@428116 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Consider the following:
- A marked user in a conference
- One or more end_marked only users in the conference
When the marked users leaves, we will be in the conf_state_multi_marked state.
This currently will traverse the users, kicking out any who have the end_marked
flags. When they are kicked, a full ast_bridge_remove is immediately called on
the channels. At this time, we also unilaterally set the need_prompt flag.
When the need_prompt flag is set, we then playback a sound to the bridge
informing everyone that the leader has left; however, no one is left in the
bridge. This causes some odd behaviour for the end_marked users - they are
stuck waiting for the bridge to be unlocked. This results in them waiting for
5 or 6 seconds of dead air before hearing that they've been kicked.
Unfortunately, we do have to keep the bridge locked while we're playing back
the 'leader-has-left' prompt. If there are any wait_marked users in the
conference, this behaviour can't be easily changed - but we do make the case
of the end_marked users better with this patch.
Review: https://reviewboard.asterisk.org/r/4184/
ASTERISK-24522 #close
Reported by: Matt Jordan
........
Merged revisions 428077 from http://svn.asterisk.org/svn/asterisk/branches/11
........
Merged revisions 428078 from http://svn.asterisk.org/svn/asterisk/branches/12
........
Merged revisions 428079 from http://svn.asterisk.org/svn/asterisk/branches/13
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@428080 65c4cc65-6c06-0410-ace0-fbb531ad65f3
From reviewboard:
"During blind transfer testing, it was noticed that tests were failing
occasionally because the ARI blind transfer event was not being sent.
After investigating, I detected a race condition in the blind transfer
code. When blind transferring a single channel, the actual transfer
operation (i.e. removing the transferee from the bridge and directing
them to the proper dialplan location) is queued onto the transferee
bridge channel. After queuing the transfer operation, the blind transfer
Stasis message is published. At the time of publication, snapshots of
the channels and bridge involved are created. The ARI subscriber to the
blind transfer Stasis message then attempts to determine if the bridge
or any of the involved channels are subscribed to by ARI applications.
If so, then the blind transfer message is sent to the applications. The
way that the ARI blind transfer message handler works is to first see
if the transferer channel is subscribed to. If not, then iterate over
all the channel IDs in the bridge snapshot and determine if any of
those are subscribed to. In the test we were running, the lone
transferee channel was subscribed to, so an ARI event should have been
sent to our application. Occasionally, though, the bridge snapshot did
not have any channels IDs on it at all. Why?
The problem is that since the blind transfer operation is handled by a
separate thread, it is possible that the transfer will have completed and
the channels removed from the bridge before we publish the blind transfer
Stasis message. Since the blind transfer has completed, the bridge on
which the transfer occurred no longer has any channels on it, so the
resulting bridge snapshot has no channels on it. Through investigation of
the code, I found that attended transfers can have this issue too for the
case where a transferee is transferred to an application."
The fix employed here is to decouple the creation of snapshots for the transfer
messages from the publication of the transfer messages. This way, snapshots
can be created to reflect what they are at the time of the transfer operation.
Review: https://reviewboard.asterisk.org/r/4135
........
Merged revisions 427848 from http://svn.asterisk.org/svn/asterisk/branches/12
........
Merged revisions 427870 from http://svn.asterisk.org/svn/asterisk/branches/13
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@427873 65c4cc65-6c06-0410-ace0-fbb531ad65f3
