This patch is the initial push to update Asterisk's CDR engine for the new
bridging framework. This patch guts the existing CDR engine and builds the new
on top of messages coming across Stasis. As changes in channel state and bridge
state are detected, CDRs are built and dispatched accordingly. This
fundamentally changes CDRs in a few ways.
(1) CDRs are now *very* reflective of the actual state of channels and bridges.
This means CDRs track well with what an actual channel is doing - which
is useful in transfer scenarios (which were previously difficult to pin
down). It does, however, mean that CDRs cannot be 'fooled'. Previous
behavior in Asterisk allowed for CDR applications, channels, and other
properties to be spoofed in parts of the code - this no longer works.
(2) CDRs have defined behavior in multi-party scenarios. This behavior will not
be what everyone wants, but it is a defined behavior and as such, it is
predictable.
(3) The CDR manipulation functions and applications have been overhauled. Major
changes have been made to ResetCDR and ForkCDR in particular. Many of the
options for these two applications no longer made any sense with the new
framework and the (slightly) more immutable nature of CDRs.
There are a plethora of other changes. For a full description of CDR behavior,
see the CDR specification on the Asterisk wiki.
(closes issue ASTERISK-21196)
Review: https://reviewboard.asterisk.org/r/2486/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@391947 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This makes the AGI AsyncAGI event put provided AGI command arguments in
the event's environment.
(closes issue ASTERISK-21304)
Patch-By: Dirk Wendland
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@391271 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When IPv6 support was added to FastAGI, the intent was to have the ability to
check all addresses resolved for a host since we might receive an IPv4 address
and an IPv6 address. The problem with the current code, is that, since we are
doing O_NONBLOCK, we get EINPROGRESS when calling ast_connect() but are ignoring
this instead of handling it. We break out of the loop and continue on. When we
later call ast_poll(), it succeeds but we never check if we have a connection or
not on the socket level. We then attempt to send data to the host address that
we think is setup and it fails. We then check the errno and see that we have
"connection refused" and then return with agi failed.
This patch does the following:
* Handles EINPROGRESS by creating the function handle_connection()
- ast_poll() was moved into this function
- This function checks the results of the connection on the socket level after
calling ast_poll()
* Continues to the next address if the above fails to create a connection
* Once all addresses resolved are tried and we still are unable to establish a
connection, then we return that the FastAGI call failed
(closes issue ASTERISK-21065)
Reported by: Jeremy Kister
Tested by: Jeremy Kister, Michael L. Young
Patches:
asterisk-21065_poll_correctly_v4.diff Michael L. Young (license 5026)
Review: https://reviewboard.asterisk.org/r/2330/
........
Merged revisions 381893 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@381894 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch adds the capability for asynchronous manipulation of audio being
played back to a channel though a new AMI action "ControlPlayback". The
ControlPlayback action supports a number of operations, the availability of
which depend on the application being used to send audio to the channel.
When the audio playback was initiated using the ControlPlayback application
or CONTROL STREAM FILE AGI command, the audio can be paused, stopped,
restarted, reversed, or skipped forward. When initiated by other mechanisms
(such as the Playback application), the audio can be stopped, reversed, or
skipped forward.
Review: https://reviewboard.asterisk.org/r/2265/
(closes issue ASTERISK-20882)
Reported by: mjordan
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@379830 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The AMI DBDelTree command will return Success/Key tree deleted successfully even
if the given key does not exist. The CLI command 'database deltree' had a
similar problem, but was saved because it actually responded with '0 database
entries removed'. AGI had a slightly different error, where it would return
success if the database was unavailable.
This came from confusion about the ast_db_deltree retval, which is -1 in the
event of a database error, or number of entries deleted (including 0 for
deleting nothing).
* Changed some poorly named res variables to num_deleted
* Specified specific errors when calling ast_db_deltree (database unavailable
vs. entry not found vs. success)
* Fixed similar bug in AGI database deltree, where 'Database unavailable'
results in successful result
(closes issue AST-967)
Reported by: John Bigelow
Review: https://reviewboard.asterisk.org/r/2138/
........
Merged revisions 374426 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 374427 from http://svn.asterisk.org/svn/asterisk/branches/10
........
Merged revisions 374428 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@374429 65c4cc65-6c06-0410-ace0-fbb531ad65f3
* Added AMI event documentation for AsyncAGI and AGIExec events.
(closes issue ASTERISK-20318)
Reported by: Dan Cropp
Patches:
res_agi_patch.txt (license #6422) patch uploaded by Dan Cropp
modified for trunk.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@374075 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch changes get_agi_cmd so that the return can be checked
to differentiate between an empty list success and something that
triggered an error. This in turn allows launch_asyncagi to detect
these errors and break free from the command processing loop so
that the async agi can be ended more cleanly
(closes issue ASTERISK-20109)
Reported by: Jeremiah Gowdy
Patches: jgowdy-7-9-2012.diff uploaded by Jeremiah Gowdy (license 6358)
(Modified by me to fix some logical issues and apply to trunk)
Review: https://reviewboard.asterisk.org/r/2117/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@373608 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The while loop responsible for reading AGI messages from a fastAGI service
can end up looping indefinitely when an AGI script fails to indicate the end
of a message with a \n character. This patch adds an indication that we are
expecting a \n character to end the message to make it more clear to users
that this is necessary if they are receiving this warning over and over.
(issue ASTERISK-20061)
Reported by: Eike Kuiper
........
Merged revisions 370494 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 370495 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@370510 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch addresses a number of modules in resources that did not handle the
negative return value from function calls adequately. This includes:
* res_agi.c: if the result of the read function is a negative number,
indicating some failure, the result would instead be treated as the number
of bytes read. This patch now treats negative results in the same manner
as an end of file condition, with the exception that it also logs the
error code indicated by the return.
* res_musiconhold.c: if spawn_mp3 fails to assign a file descriptor to srcfd,
and instead assigns a negative value, that file descriptor could later be
passed to functions that require a valid file descriptor. If spawn_mp3 fails,
we now immediately retry instead of continuing in the logic.
* res_rtp_asterisk.c: if no codec can be matched between two RTP instances
in a peer to peer bridge, we immediately return instead of attempting to
use the codec payload type as an index to determine the appropriate negotiated
codec.
(issue ASTERISK-19655)
Reported by: Matt Jordan
Review: https://reviewboard.asterisk.org/r/1863/
........
Merged revisions 362362 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 362364 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@362365 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch adds a variable AGIEXITONHANGUP for res_agi. If this variable is
set to "yes" on a channel, AGI() will exit immediately once a channel hangup
has been detected. This was the behavior of AGI() in Asterisk 1.4 and earlier
and is still desired by some people.
Review: https://reviewboard.asterisk.org/r/1734/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@355102 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Continue channel opaque-ification by wrapping all of the stringfields.
Eventually, we will restrict what can actually set these variables, but
the purpose for now is to hide the implementation and keep people from
adding code that directly accesses the channel structure. Semantic
changes will follow afterward.
Review: https://reviewboard.asterisk.org/r/1661/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@352348 65c4cc65-6c06-0410-ace0-fbb531ad65f3
There are many benefits to making the ast_channel an opaque handle, from
increasing maintainability to presenting ways to kill masquerades. This patch
kicks things off by taking things a field at a time, renaming the field to
'__do_not_use_${fieldname}' and then writing setters/getters and converting the
existing code to using them. When all fields are done, we can move ast_channel
to a C file from channel.h and lop off the '__do_not_use_'.
This patch sets up main/channel_interal_api.c to be the only file that actually
accesses the ast_channel's fields directly. The intent would be for any API
functions in channel.c to use the accessor functions. No more monkeying around
with channel internals. We should use our own APIs.
The interesting changes in this patch are the addition of
channel_internal_api.c, the moving of the AST_DATA stuff from channel.c to
channel_internal_api.c (note: the AST_DATA stuff will have to be reworked to
use accessor functions when ast_channel is really opaque), and some re-working
of the way channel iterators/callbacks are handled so as to avoid creating fake
ast_channels on the stack to pass in matching data by directly accessing fields
(since "name" is a stringfield and the fake channel doesn't init the
stringfields, you can't use the ast_channel_name_set() function). I went with
ast_channel_name(chan) for a getter, and ast_channel_name_set(chan, name) for a
setter.
The majority of the grunt-work for this change was done by writing a semantic
patch using Coccinelle ( http://coccinelle.lip6.fr/ ).
Review: https://reviewboard.asterisk.org/r/1655/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@350223 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The fix for ASTERISK-12715 and ASTERISK-12685 added a check for the Park
application because the channel needed to be masqueraded to prevent a
crash. Since the Park application now always masquerades the channel into
the parking lot, the special check is no longer needed. The fix also
resulted in AGI exec Park attempting to double park the call and not honor
the Park application parameters.
* Removed no longer necessary call to ast_masq_park_call() by AGI exec for
the Park application. (Reverts -r146923)
* Fix Park application to only return 0 or -1. The AGI exec Park was
causing broken pipe error messages because the Park application returned 1
on successful park.
(closes issue ASTERISK-18737)
........
Merged revisions 341717 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 341718 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@341719 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/10
................
r340109 | mnicholson | 2011-10-10 09:15:41 -0500 (Mon, 10 Oct 2011) | 18 lines
Merged revisions 340108 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r340108 | mnicholson | 2011-10-10 09:14:48 -0500 (Mon, 10 Oct 2011) | 11 lines
Load the proper XML documentation when multiple modules document the same application.
This patch adds an optional "module" attribute to the XML documentation spec
that allows the documentation processor to match apps with identical names from
different modules to their documentation. This patch also fixes a number of
bugs with the documentation processor and should make it a little more
efficient. Support for multiple languages has also been properly implemented.
ASTERISK-18130
Review: https://reviewboard.asterisk.org/r/1485/
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@340110 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
................
r314780 | russell | 2011-04-22 09:02:23 -0500 (Fri, 22 Apr 2011) | 18 lines
Merged revisions 314778 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
........
r314778 | russell | 2011-04-22 08:58:03 -0500 (Fri, 22 Apr 2011) | 11 lines
Initialize buffers in getvar and getvarfull.
Initialize the buffers used to hold the result from GET VARIABLE or
GET VARIABLE FULL. The bug report shows func_read returning garbage in
the result. It assumed that the buffer passed in was initialized, like many
other functions do. In the more common code path (through the dialplan), it
is initialized, so just initialize it here too.
(closes issue #19050)
Reported by: johnz
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@314781 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r314069 | rmudgett | 2011-04-18 11:10:10 -0500 (Mon, 18 Apr 2011) | 22 lines
The AsyncAGI command loop is lax in the value it returns for the return status.
* Return correct status: SUCCESS/FAILED/HANGUP. Previously, abnormal
exits from the command loop such as hangup would return SUCCESS.
* The "asyncagi break" command now returns SUCCESS and is now the only way
to break the command loop with that status. Previously, it returned
FAILED.
* The AMI event AsyncAGI End is no longer sent if the AsyncAGI Start event
is not sent. Previously, this happened because of an error setting up the
AGI pipes.
* All executed AGI commands now get an AsyncAGI Exec result event.
Previously, if the command returned failure (because of hangup), the
command loop just exited with FAILURE and did not send the AsyncAGI Exec
result event.
* Makes sure that the channel frame queue is empty on hangup.
Review: https://reviewboard.asterisk.org/r/1183/
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@314080 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r313700 | rmudgett | 2011-04-13 17:52:47 -0500 (Wed, 13 Apr 2011) | 5 lines
Revert flushing stale AsyncAGI commands from -r313615.
It looks like it was intentional to leave any commands or in-flight
commands in the queue in case Async AGI is run again on the call.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@313701 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
................
r313588 | rmudgett | 2011-04-13 11:31:50 -0500 (Wed, 13 Apr 2011) | 55 lines
Merged revisions 313579 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
................
r313579 | rmudgett | 2011-04-13 11:29:49 -0500 (Wed, 13 Apr 2011) | 48 lines
Merged revisions 313545 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r313545 | rmudgett | 2011-04-13 11:21:24 -0500 (Wed, 13 Apr 2011) | 41 lines
Asterisk does not hangup a channel after endpoint hangs up.
If the call that the dialplan started an AGI script for is hungup while
the AGI script is in the middle of a command then the AGI script is not
notified of the hangup. There are many AGI Exec commands that this can
happen with. The reported applications have been: Background, Wait, Read,
and Dial. Also the AGI Get Data command.
* Don't wait on the Asterisk channel after it has hung up. The channel is
likely to never need servicing again.
* Restored the AGI script's ability to return the AGI_RESULT_HANGUP value
in run_agi(). It previously only could return AGI_RESULT_SUCCESS or
AGI_RESULT_FAILURE after the DeadAGI and AGI applications were merged.
(closes issue #17954)
Reported by: mn3250
Patches:
issue17954_v1.8.patch uploaded by rmudgett (license 664)
issue17954_v1.6.2.patch uploaded by rmudgett (license 664)
issue17954_v1.4.patch uploaded by rmudgett (license 664)
Tested by: rmudgett
JIRA SWP-2171
(closes issue #18492)
Reported by: devmod
Tested by: rmudgett
JIRA SWP-2761
(closes issue #18935)
Reported by: nvitaly
Tested by: astmiv, rmudgett
JIRA SWP-3216
(closes issue #17393)
Reported by: siby
Tested by: rmudgett
JIRA SWP-2727
Review: https://reviewboard.asterisk.org/r/1165/
........
................
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@313606 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch is the foundation of an entire new way of looking at media in Asterisk.
The code present in this patch is everything required to complete phase1 of my
Media Architecture proposal. For more information about this project visit the link below.
https://wiki.asterisk.org/wiki/display/AST/Media+Architecture+Proposal
The primary function of this patch is to convert all the usages of format
bitfields in Asterisk to use the new format and format_cap APIs. Functionally
no change in behavior should be present in this patch. Thanks to twilson
and russell for all the time they spent reviewing these changes.
Review: https://reviewboard.asterisk.org/r/1083/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@306010 65c4cc65-6c06-0410-ace0-fbb531ad65f3
For each component, the set of valid BNF expansions defines exactly
which characters may appear unescaped. All other characters MUST be
escaped.
This patch modifies ast_uri_encode() to encode strings in line with this recommendation. This patch also adds an ast_escape_quoted() function which escapes '"' and '\' characters in quoted strings in accordance with section 25.1 of RFC 3261. The ast_uri_encode() function has also been modified to take an ast_flags struct describing the set of rules it should use when escaping characters to allow for it to escape SIP URIs in addition to HTTP URIs and other types of URIs or variations of those two URI types in the future.
The ast_uri_decode() function has also been modified to accept an ast_flags struct describing the set of rules to use when decoding to enable decoding '+' as ' ' in legacy http URLs.
The unit tests for these functions have also been updated.
ABE-2705
Review: https://reviewboard.asterisk.org/r/1081/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@303509 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
................
r302549 | seanbright | 2011-01-19 13:43:11 -0500 (Wed, 19 Jan 2011) | 17 lines
Merged revisions 302548 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
........
r302548 | seanbright | 2011-01-19 13:37:09 -0500 (Wed, 19 Jan 2011) | 10 lines
Properly handle partial reads from fgets() when handling AGIs.
When fgets() failed with EAGAIN, we were continually decrementing the available
space left in our buffer, resulting in botched command handling.
(closes issue #16032)
Reported by: notahat
Patches:
agi_buffer_patch2.diff uploaded by fnordian (license 110)
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@302550 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Add the ability to play a sound file, listen for more than just one digit,
specify
escape characters. Backwards compatible (to work with only timeout specified).
(closes issue #15531)
Reported by: diLLec
Patches:
asterisk-res_agi-203638-patched.patch uploaded by diLLec (license 839)
Tested by: diLLec, espiceland
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@295554 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The purpose of this patch is to eliminate struct ast_callerid since it has
turned into a miscellaneous collection of various party information.
Eliminate struct ast_callerid and replace it with the following struct
organization:
struct ast_party_name {
char *str;
int char_set;
int presentation;
unsigned char valid;
};
struct ast_party_number {
char *str;
int plan;
int presentation;
unsigned char valid;
};
struct ast_party_subaddress {
char *str;
int type;
unsigned char odd_even_indicator;
unsigned char valid;
};
struct ast_party_id {
struct ast_party_name name;
struct ast_party_number number;
struct ast_party_subaddress subaddress;
char *tag;
};
struct ast_party_dialed {
struct {
char *str;
int plan;
} number;
struct ast_party_subaddress subaddress;
int transit_network_select;
};
struct ast_party_caller {
struct ast_party_id id;
char *ani;
int ani2;
};
The new organization adds some new information as well.
* The party name and number now have their own presentation value that can
be manipulated independently. ISDN supplies the presentation value for
the name and number at different times with the possibility that they
could be different.
* The party name and number now have a valid flag. Before this change the
name or number string could be empty if the presentation were restricted.
Most channel drivers assume that the name or number is then simply not
available instead of indicating that the name or number was restricted.
* The party name now has a character set value. SIP and Q.SIG have the
ability to indicate what character set a name string is using so it could
be presented properly.
* The dialed party now has a numbering plan value that could be useful to
have available.
The various channel drivers will need to be updated to support the new
core features as needed. They have simply been converted to supply
current functionality at this time.
The following items of note were either corrected or enhanced:
* The CONNECTEDLINE() and REDIRECTING() dialplan functions were
consolidated into func_callerid.c to share party id handling code.
* CALLERPRES() is now deprecated because the name and number have their
own presentation values.
* Fixed app_alarmreceiver.c write_metadata(). The workstring[] could
contain garbage. It also can only contain the caller id number so using
ast_callerid_parse() on it is silly. There was also a typo in the
CALLERNAME if test.
* Fixed app_rpt.c using ast_callerid_parse() on the channel's caller id
number string. ast_callerid_parse() alters the given buffer which in this
case is the channel's caller id number string. Then using
ast_shrink_phone_number() could alter it even more.
* Fixed caller ID name and number memory leak in chan_usbradio.c.
* Fixed uninitialized char arrays cid_num[] and cid_name[] in
sig_analog.c.
* Protected access to a caller channel with lock in chan_sip.c.
* Clarified intent of code in app_meetme.c sla_ring_station() and
dial_trunk(). Also made save all caller ID data instead of just the name
and number strings.
* Simplified cdr.c set_one_cid(). It hand coded the ast_callerid_merge()
function.
* Corrected some weirdness with app_privacy.c's use of caller
presentation.
Review: https://reviewboard.asterisk.org/r/702/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@276347 65c4cc65-6c06-0410-ace0-fbb531ad65f3