The library that provides UUID support varies greatly from system to
system. On most Linux distros, it's in libuuid. On OpenBSD, it's in
libe2fs-uuid. On OS X, it is in libsystem.
This patch plays hide-and-seek with UUID support, looking for it in the
three places we know about. It also corrects the Makefile so that it uses
the configured library name and include path.
(closes issue ASTERISK-21816)
Reported by: Brad Latus (snuffy)
Tested by: Brad Latus (snuffy)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@390352 65c4cc65-6c06-0410-ace0-fbb531ad65f3
* DTMF attended and blind transfers have hold/unhold behavior restored.
* External attended and blind transfers unhold the transfered party when
the transfer is initiated.
* Made prohibit blind transferring a bridge marked as masquerade only.
(ConfBridge bridges)
* Made running an application or playing a file inside a bridge post the
hold/unhold messages if MOH is requested.
Review: https://reviewboard.asterisk.org/r/2574/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@390289 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch addresses issues during immediate shutdowns, where modules
are not unloaded, but Asterisk atexit handlers are run.
In the typical case, this usually isn't a big deal. But the
introduction of the Stasis message bus makes it much more likely for
asynchronous activity to be happening off in some thread during
shutdown.
During an immediate shutdown, Asterisk skips unloading modules. But
while it is processing the atexit handlers, there is a window of time
where some of the core message types have been cleaned up, but the
message bus is still running. Specifically, it's still running
module subscriptions that might be using the core message types. If a
message is received by that subscription in that window, it will
attempt to use a message type that has been cleaned up.
To solve this problem, this patch introduces ast_register_cleanup().
This function operates identically to ast_register_atexit(), except
that cleanup calls are not invoked on an immediate shutdown. All of
the core message type and topic cleanup was moved from atexit handlers
to cleanup handlers.
This ensures that core type and topic cleanup only happens if the
modules that used them are first unloaded.
This patch also changes the ast_assert() when accessing a cleaned up
or uninitialized message type to an error log message. Message type
functions are actually NULL safe across the board, so the assert was a
bit heavy handed. Especially for anyone with DO_CRASH enabled.
Review: https://reviewboard.asterisk.org/r/2562/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@390122 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When ast_channel_cached_blob_create was merged,
ast_channel_blob_create_from_cache was partially removed in an
unresolved merge conflict. This restores ast_channel_blob_create_from_cache
and refactors usage of ast_channel_cached_blob_create (requires an
ast_channel) to use ast_channel_blob_create_from_cache (requires a
channel uniqueid) instead.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@389974 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The attended transfer API call can complete the attended transfer in a number of ways
depending on the current bridged states of the channels involved.
The hiding of masquerades is done in some bridging-related functions, such as the manager
Bridge action and the Bridge dialplan application. In addition, call pickup was edited
to "move" a channel rather than masquerade it.
Review: https://reviewboard.asterisk.org/r/2511
(closes issue ASTERISK-21334)
Reported by Matt Jordan
(closes issue Asterisk-21336)
Reported by Matt Jordan
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@389848 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch moves a number of AMI events over to the Stasis-Core message bus.
This includes:
* ChanSpyStart/Stop
* MonitorStart/Stop
* MusicOnHoldStart/Stop
* FullyBooted/Reload
* All Voicemail/MWI related events
In addition, it adds some Stasis-Core and AMI support for generic AMI messages,
refactors the message router in AMI to use a single router with topic
forwarding for the topics that AMI cares about, and refactors MWI message
types and topics to be more name compliant.
Review: https://reviewboard.asterisk.org/r/2532
(closes issue ASTERISK-21462)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@389733 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Asterisk REST interface.
This adds the /playback/{playbackId}/control resource, which may be
POSTed to to pause, unpause, reverse, forward or restart the media
playback.
Attempts to control a playback that is not currently playing will
either return a 404 Not Found (because the playback object no longer
exists) or a 409 Conflict (because the playback object is still in the
queue to be played).
This patch also adds skipms and offsetms parameters to the
/channels/{channelId}/play resource.
(closes issue ASTERISK-21587)
Review: https://reviewboard.asterisk.org/r/2559
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@389603 65c4cc65-6c06-0410-ace0-fbb531ad65f3
and GET /playback/{playbackId}.
This allows an external application to initiate playback of a sound on a
channel while the channel is in the Stasis application.
/play commands are issued asynchronously, and return immediately with
the URL of the associated /playback resource. Playback commands queue up,
playing in succession. The /playback resource shows the state of a
playback operation as enqueued, playing or complete. (Although the
operation will only be in the 'complete' state for a very short time,
since it is almost immediately freed up).
(closes issue ASTERISK-21283)
(closes issue ASTERISK-21586)
Review: https://reviewboard.asterisk.org/r/2531/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@389587 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Breaks many things until they can be reworked. A partial list:
chan_agent
chan_dahdi, chan_misdn, chan_iax2 native bridging
app_queue
COLP updates
DTMF attended transfers
Protocol attended transfers
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@389378 65c4cc65-6c06-0410-ace0-fbb531ad65f3
In r388005, macros were introduced to consistently define message
types. This added an assert if a message type was used either before
it was initialized or after it had been cleaned up. It turns out that
this assertion fires during shutdown.
This actually exposed a hidden shutdown ordering problem. Since
unsubscribing is asynchronous, it's possible that the message types
used by the subscription could be freed before the final message of
the subscription was processed.
This patch adds stasis_subscription_join(), which blocks until the
last message has been processed by the subscription. Since joining was
most commonly done right after an unsubscribe, a
stasis_unsubscribe_and_join() convenience function was also added.
Similar functions were also added to the stasis_caching_topic and
stasis_message_router, since they wrap subscriptions and have similar
problems.
Other code in trunk was refactored to join() where appropriate, or at
least verify that the subscription was complete before being
destroyed.
Review: https://reviewboard.asterisk.org/r/2540
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@389011 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch does two things:
* It fixes a bug where the outbound channel's application/data set by the
dialing API/app_dial is not communicated until the channel is hung up.
If that happens, AMI would incorrectly send a NewExten event immediately
after a Hangup. This isn't really AMI's fault, as the dialing APIs never
communicated the 'helpful' app/data on the outbound channel until it was
hungup.
* It makes public sending a stasis message about a change in channel state.
This is useful enough that - for now at least - it should be public. If
operations on a channel go to being more coarse-grained, this function
could be made private again.
Review: https://reviewboard.asterisk.org/r/2548
Note that this problem was found and reported by Matt DiMeo.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@388976 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When implementing playback for stasis-http, the monolithicedness of
res_stasis really started to get in my way.
This patch breaks the major components of res_stasis.c into individual
files.
* res/stasis/app.c - Stasis application tracking
* res/stasis/control.c - Channel control objects
* res/stasis/command.c - Channel command object
This refactoring also allows res_stasis applications to be loaded as
independent modules, such as the new res_stasis_answer module.
The bulk of this patch is simply moving code from one file to another,
adjusting names and adding accessors as necessary.
Review: https://reviewboard.asterisk.org/r/2530/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@388729 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The debug versions of ao2_ref() should only be used if REF_DEBUG is
enabled so nothing is written to /tmp/refs unexpectedly.
(closes issue ASTERISK-21785)
Reported by: abelbeck
Patches:
jira_asterisk_21785_v11.patch (license #5621) patch uploaded by rmudgett
Tested by: abelbeck
........
Merged revisions 388700 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@388701 65c4cc65-6c06-0410-ace0-fbb531ad65f3
I've noticed when doing a graceful shutdown that the res_stasis_http.so
module gets unloaded before the modules that use it, which causes some
asserts during their unload.
While r386928 was a quick hack to get it to not assert and die, this
patch increases the use counts on res_stasis.so and res_stasis_http.so
properly. It's a bigger change than I expected, hence the review instead
of just committing it.
Review: https://reviewboard.asterisk.org/r/2489/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@388350 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This change adds a framework in res_stasis for handling events from
channel topics. JSON event generation and validation code is created
from event documentation in rest-api/api-docs/events.json to assist in
JSON event generation, ensure consistency, and ensure that accurate
documentation is available for ALL events that are received by
res_stasis applications.
The userevent application has been refactored along with the code that
handles userevent channel blob events to pass the headers as key/value
pairs in the JSON blob. As a side-effect, app_userevent now handles
duplicate keys by overwriting the previous value.
Review: https://reviewboard.asterisk.org/r/2428/
(closes issue ASTERISK-21180)
Patch-By: Kinsey Moore <kmoore@digium.com>
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@388275 65c4cc65-6c06-0410-ace0-fbb531ad65f3
A GCC bug[1] can, in some cases, pop up an unsuppressible pedwarn when
using a static inline standard library function from a non-static
inline function.
This normally doesn't show up, but can occur if you're running an
upgrade version of GCC (such as GCC 4.8 on OS X, which normally runs
GCC 4.2).
[1]: http://gcc.gnu.org/bugzilla/show_bug.cgi?id=47816
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@388046 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When we first introduced the channel blob types, the JSON blobs were
self identifying by a required "type" field in the JSON object
itself. This, as it turns out, was a bad idea.
When we introduced the message router, it was useless for routing based
on the JSON type. And messages had two type fields to check: the
stasis_message_type() of the message itself, plus the type field in the
JSON blob (but only if it was a blob message).
This patch corrects that mistake by removing the required type field
from JSON blobs, and introducing first class stasis_message_type objects
for the actual message type.
Since we now will have a proliferation of message types, I introduced a
few macros to help reduce the amount of boilerplate necessary to set
them up.
Review: https://reviewboard.asterisk.org/r/2509
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@388005 65c4cc65-6c06-0410-ace0-fbb531ad65f3
An endpoint is an external device/system that may offer/accept
channels to/from Asterisk. While this is a very useful concept for end
users, it is surprisingly not a core concept within Asterisk itself.
This patch defines ast_endpoint as a separate object, which channel
drivers may use to expose their concept of an endpoint. As the channel
driver creates channels, it can use ast_endpoint_add_channel() to
associate channels to the endpoint. This updated the endpoint
appropriately, and forwards all of the channel's events to the
endpoint's topic.
In order to avoid excessive locking on the endpoint object itself, the
mutable state is not accessible via getters. Instead, you can create a
snapshot using ast_endpoint_snapshot_create() to get a consistent
snapshot of the internal state.
This patch also includes a set of topics and messages associated with
endpoints, and implementations of the endpoint-related RESTful
API. chan_sip was updated to create endpoints with SIP peers, but the
state of the endpoints is not updated with the state of the peer.
Along for the ride in this patch is a Stasis test API. This is a
stasis_message_sink object, which can be subscribed to a Stasis
topic. It has functions for blocking while waiting for conditions in
the message sink to be fulfilled.
(closes issue ASTERISK-21421)
Review: https://reviewboard.asterisk.org/r/2492/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@387932 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This change adds the ability for modules to add themselves as observers
to sorcery object types. Observers can be notified when objects are
created, updated, or deleted as well as when the object type is loaded or
reloaded. Observer notifications are done using a thread pool in a serialized
fashion so the caller of the sorcery API calls is minimally impacted.
This also adds the ability to create JSON changesets of a sorcery object.
Tests are also present to confirm all of the above functionality.
Review: https://reviewboard.asterisk.org/r/2477/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@387662 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch:
* Cleans up some doxygen
* Prevents leaking the system level Stasis topics and messages
on exit (users of valgrind will be happier)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@387633 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This change does the following:
1. Adds the sorcery realtime module
2. Adds unit tests for the sorcery realtime module
3. Changes the realtime core to use an ast_variable list instead of variadic arguments
4. Changes all realtime drivers to accept an ast_variable list
Review: https://reviewboard.asterisk.org/r/2424/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@386731 65c4cc65-6c06-0410-ace0-fbb531ad65f3
In order to get people familiar with the Stasis message bus, it would
be useful to have something of a tutorial. Since I'm not clever enough
to think of some cool integration we could do with Twitter, I settled
for something that might actually be useful.
This patch adds a res_statsd.so module, which implements a basic
statsd[1] client. Statsd is a very simple statistics gathering server,
which can publish its results to a backend graphing engine, like
Graphite[2]. There are several different Statsd server
implementations[3], so you can pick what works best for your
environment.
The actual example of how to use the Stasis message bus is in
res_chan_stats.so. This module demonstrates how to use subscriptions
and the message router by monitoring messages and posting channels
stats to the statsd server.
A wiki page walking through res_chan_stats.so is forthcoming.
[1]: https://github.com/etsy/statsd/
[2]: http://graphite.readthedocs.org/en/latest/
[3]: http://joemiller.me/2011/09/21/list-of-statsd-server-implementations/
Review: https://reviewboard.asterisk.org/r/2460/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@386624 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The pimp_my_sip branch is being merged at this point because
it offers basic functionality, and from an API standpoint, things
are complete.
SIP work is *not* feature-complete; however, with the completion
of the SUBSCRIBE/NOTIFY API, all APIs (except a PUBLISH API) have
been created, and thus it is possible for developers to attempt
to create new SIP work.
API documentation can be found in the doxygen in the code, but
usability documentation is still lacking.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@386540 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The API itself is documented using Swagger, a lightweight mechanism for
documenting RESTful API's using JSON. This allows us to use swagger-ui
to provide executable documentation for the API, generate client
bindings in different languages, and generate a lot of the boilerplate
code for implementing the RESTful bindings. The API docs live in the
rest-api/ directory.
The RESTful bindings are generated from the Swagger API docs using a set
of Mustache templates. The code generator is written in Python, and
uses Pystache. Pystache has no dependencies, and be installed easily
using pip. Code generation code lives in rest-api-templates/.
The generated code reduces a lot of boilerplate when it comes to
handling HTTP requests. It also helps us have greater consistency in the
REST API.
(closes issue ASTERISK-20891)
Review: https://reviewboard.asterisk.org/r/2376/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@386232 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch adds the concept of ast_websocket_server to
res_http_websocket, allowing WebSocket connections on URL's more more
than /ws.
The existing funcitons for managing the WebSocket subprotocols on /ws
still work, so this patch should be completely backward compatible.
(closes issue ASTERISK-21279)
Review: https://reviewboard.asterisk.org/r/2453/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@386020 65c4cc65-6c06-0410-ace0-fbb531ad65f3
In the move from Asterisk's event system to Stasis, this makes
distributed device state aggregation always-on, removes unnecessary
task processors where possible, and collapses aggregate and
non-aggregate states into a single cache for ease of retrieval. This
also removes an intermediary step in device state aggregation.
Review: https://reviewboard.asterisk.org/r/2389/
(closes issue ASTERISK-21101)
Patch-by: Kinsey Moore <kmoore@digium.com>
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@385860 65c4cc65-6c06-0410-ace0-fbb531ad65f3
After some discussion on asterisk-dev, it was decided that the bulk of
the logic in app_stasis actually belongs in a resource module instead
of the application module.
This patch does that, leaves the app specific stuff in app_stasis, and
fixes up everything else to be consistent with that change.
* Renamed test_app_stasis to test_res_stasis
* Renamed app_stasis.h to stasis_app.h
* This is still stasis application support, even though it's no
longer in an app_ module. The name should never have been tied to
the type of module, anyways.
* Now that json isn't a resource module anymore, moved the
ast_channel_snapshot_to_json function to main/stasis_channels.c,
where it makes more sense.
Review: https://reviewboard.asterisk.org/r/2430/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@385742 65c4cc65-6c06-0410-ace0-fbb531ad65f3
refactored to use these events rather than producing the events directly
in channel.c. Finally, the code was added to app_stasis to produce
DTMF events on the WebSocket.
The AMI events are completely backward compatible, including sending
events on transmitted DTMF, and sending DTMF start events.
The Stasis-HTTP events are somewhat simplified. Since DTMF start and
DTMF send events are generally less useful, Stasis-HTTP will only send
events on received DTMF end.
(closes issue ASTERISK-21282)
(closes issue ASTERISK-21359)
Review: https://reviewboard.asterisk.org/r/2439
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@385734 65c4cc65-6c06-0410-ace0-fbb531ad65f3
These functions are already used in one branch (jrose's parking branch)
and will soon be used in other branches as well.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@385522 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch does the following:
* A new Stasis payload has been defined for multi-channel messages. This
payload can store multiple ast_channel_snapshot objects along with a single
JSON blob. The payload object itself is opaque; the snapshots are stored
in a container keyed by roles. APIs have been provided to query for and
retrieve the snapshots from the payload object.
* The Dial AMI events have been refactored onto Stasis. This includes dial
messages in app_dial, as well as the core dialing framework. The AMI events
have been modified to send out a DialBegin/DialEnd events, as opposed to
the subevent type that was previously used.
* Stasis messages, types, and other objects related to channels have been
placed in their own file, stasis_channels. Unit tests for some of these
objects/messages have also been written.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@384910 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This is the API that binds the Stasis dialplan application to external
Stasis applications. It also adds the beginnings of WebSocket
application support.
This module registers a dialplan function named Stasis, which is used
to put a channel into the named Stasis app. As a channel enters and
leaves the Stasis diaplan application, the Stasis app receives a
'stasis-start' and 'stasis-end' events.
Stasis apps register themselves using the stasis_app_register and
stasis_app_unregister functions. Messages are sent to an application
using stasis_app_send.
Finally, Stasis apps control channels through the use of the
stasis_app_control object, and the family of stasis_app_control_*
functions.
Other changes along for the ride are:
* An ast_frame_dtor function that's RAII_VAR safe
* Some common JSON encoders for name/number, timeval, and
context/extension/priority
Review: https://reviewboard.asterisk.org/r/2361/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@384879 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch fixes a bug introduced in r76703, wherein Asterisk could only parse
arguments in the so-called 'recommended' way, e.g., NoOp(foo,bar). The proper
syntax of NoOp,foo|bar is now parsed correctly.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@384452 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch migrates the TestEvent AMI events to first be dispatched over the
Stasis-Core message bus. This helps to preserve the ordering of the events
with other events in the AMI system, such as the various channel related
events.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@384389 65c4cc65-6c06-0410-ace0-fbb531ad65f3
* Updated test_uuid.c to test the new API call.
* Made system use the new API call to eliminate "10's of lines" where
used.
* Fixed untested ast_strdup() return in stasis_subscribe() by eliminating
the need for it. struct stasis_subscription now contains the uniqueid[]
string.
* Fixed some issues in exchangecal_write_event():
Create uid with enough space for a UUID string to avoid a realloc.
Fix off by one error if the calendar event provided a UUID string.
There is no need to check for NULL before calling ast_free().
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@384302 65c4cc65-6c06-0410-ace0-fbb531ad65f3
HangupRequest and SoftHangupRequest are now ast_channel_blob Stasis
messages, with the cause code as an optional field in the blob.
NewCallerid now simply watches for changes in the callerid information
in channel snapshots, and creates the AMI event appropriately.
Since the original NewCallerid event honored the channelvars setting
in manager.conf, the channel variables configured there had to become
a part of the channel snapshot. These are now a part of every snapshot
based event, making the configuration description "every time a
channel-oriented event is emitted" less of a lie.
There a a few other changes wrapped up in here as well.
* When ast_channel_topic() is given NULL for a channel, it returns
the ast_channel_topic_all() topic instead of NULL. This can clean
up a lot of NULL checking we're doing currently.
* The fields Cause and Cause-txt were removed from the base channel
information and put only on the Hangup events, since those fields
are meaningless outside of a Hangup event.
* Removed the pipe-delimiter processing of the channelvars field,
since that's been deprecated forever.
(closes issue ASTERISK-21096)
Review: https://reviewboard.asterisk.org/r/2405/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@383726 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When I moved res_json.c to json.c, I left the MODULE_INFO stuff in there,
which was interesting if you ran module show. I also forgot to call what
was in module_load() from asterisk main().
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@383611 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch started out simply as fixing the bouncing tests introduced
in r382685, but required some other changes to give it a decent
implementation.
To fix the bouncing tests, the UserEvent and Newexten AMI events
needed to be refactored to dispatch via Stasis. Dispatching directly
to AMI resulted in those events sometimes getting ahead of the
associated Newchannel events, which would understandably confuse anyone.
I found that instead of creating a zillion different message types and
structures associated with them, it would be preferable to define a
message type that has a channel snapshot and a blob of structured data
with a small bit of additional information. The JSON object model
provides a very nice way of representing structured data, so I went
with that.
* Move JSON support from res_json.c to main/json.c
* Made libjansson-dev a required dependency
* Added an ast_channel_blob message type, which has a channel
snapshot and JSON blob of data.
* Changed UserEvent and Newexten events so that they are dispatched
via ast_channel_blob messages on the channel's topic.
* Got rid of the ast_channel_varset message; used ast_channel_blob
instead.
* Extracted the manager functions converting Stasis channel events to
AMI events into manager_channel.c.
(issue ASTERISK-21096)
Review: https://reviewboard.asterisk.org/r/2381/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@383579 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Remove MWI's dependency on the event system by moving it to
Stasis-core. This also introduces forwarding topic pools in Stasis-core
which aggregate many dynamically allocated topics into a single primary
topic.
Review: https://reviewboard.asterisk.org/r/2368/
(closes issue ASTERISK-21097)
Patch-by: Kinsey Moore
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@383284 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Often times, when subscribing to a topic, one wants to handle
different message types differently. While one could cascade if/else
statements through the subscription handler, it is much cleaner to
specify a different callback for each message type. The
stasis_message_router is here to help!
A stasis_message_router is constructed for a particular stasis_topic,
which is subscribes to. Call stasis_message_router_unsubscribe() to
cancel that subscription.
Once constructed, routes can be added using
stasis_message_router_add() (or stasis_message_router_set_default()
for any messages not handled by other routes). There may be only one
route per stasis_message_type. The route's callback is invoked just as
if it were a callback for a subscription; but it only gets called for
messages of the specified type.
(issue ASTERISK-20887)
Review: https://reviewboard.asterisk.org/r/2390/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@383242 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Unsubscribing things in Asterisk seems to very commonly follow with
NULLing out the variable that was unsubscribed. This change makes that
a bit simpler.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@383168 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The cache dump mechanism allows the developer to retreive multiple
items of a given type (or of all types) from the cache residing in a
stasis caching topic in addition to the existing single-item cache
retreival mechanism. This also adds to the caching unit tests to
ensure that the new cache dump mechanism is functioning properly.
Review: https://reviewboard.asterisk.org/r/2367/
(issue ASTERISK-21097)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@382705 65c4cc65-6c06-0410-ace0-fbb531ad65f3
For the initial use of this bus, I took some work kmoore did creating
channel snapshots. So rather than create AMI events directly in the
channel code, this patch generates Stasis events, which manager.c uses
to then publish the AMI event.
This message bus provides a generic publish/subscribe mechanism within
Asterisk. This message bus is:
- Loosely coupled; new message types can be added in seperate modules.
- Easy to use; publishing and subscribing are straightforward
operations.
In addition to basic publish/subscribe, the patch also provides
mechanisms for message forwarding, and for message caching.
(issue ASTERISK-20887)
(closes issue ASTERISK-20959)
Review: https://reviewboard.asterisk.org/r/2339/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@382685 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Often, Asterisk may realize that a change in the source of an RTP stream is
about to occur and ask that the RTP engine reset it's lock on the current RTP
source. In certain scenarios, it may take awhile for the new remote system to
send RTP packets, while the old remote system may continue providing RTP during
that time period. This causes Asterisk to re-lock onto the old source, thereby
rejecting the new source when the old source stops sending RTP and the new
source begins.
This patch prevents that by having a constant secondary, 'secret' probation
mode enabled when an RTP source has been chosen. RTP packets from other sources
are always considered, but never chosen unless the current RTP source stops
sending RTP.
Review: https://reviewboard.asterisk.org/r/2364
(closes issue AST-1124)
Reported by: John Bigelow
Tested by: John Bigelow
(closes issue AST-1125)
Reported by: John Bigelow
Tested by: John Bigelow
........
Merged revisions 382573 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@382589 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When a module's configuration is not loadable, we still load the module but it
is not in a running state. When trying to troubleshoot, let's say, why
chan_motif is ignoring inbound XMPP traffic, there is no way to indicate that a
loaded module is not currently running.
(closes issue ASTERISK-21108)
Reported by: Rusty Newton
Tested by: Michael L. Young
Patches:
asterisk-21108_add_status-v2.diff Michael L. Young (license 5026)
Review: https://reviewboard.asterisk.org/r/2331/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@381749 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch does two things:
1. It disables (temporarily) strict XML documentation checking for module
configurations. We should re-enable it before making any release from
trunk.
2. Pass the module flag AST_MODULE through sorcery. This means several of the
API calls are now macros and will do this automatically for you. The config
framework needs the module that objects are registering to so it can
properly construct the documentation. (This was already a required field,
but sorcery was getting by without it)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@381567 65c4cc65-6c06-0410-ace0-fbb531ad65f3
While autoservice is running and servicing a channel the callid is being stored
and removed in the thread's local storage for each iteration of the thread loop.
If debug was set to a sufficient level the log file would be spammed with callid
thread local storage debug messages.
Added a new function that checks to see if the callid to be stored is different
than what is already contained (if anything). If it is different then
store/replace and log, otherwise just leave as is. Also made it so all logging
of debug messages pertaining to the callid thread storage outputs only when
TEST_FRAMEWORK is defined.
(issue ASTERISK-21014)
(closes issue ASTERISK-21014)
Report by: Rusty Newton
Review: https://reviewboard.asterisk.org/r/2324/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@381557 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch allows a module to define its configuration in XML in source, such
that it can be parsed by the XML documentation engine. Documentation is
generated in a two-pass approach:
1. The documentation is first generated from the XML pulled from the source
2. The documentation is then enhanced by the registration of configuration
options that use the configuration framework
This patch include configuration documentation for the following modules:
* chan_motif
* res_xmpp
* app_confbridge
* app_skel
* udptl
Two new CLI commands have been added:
* config show help - show configuration help by module, category, and item
* xmldoc dump - dump the in-memory representation of the XML documentation to
a new XML file.
Review: https://reviewboard.asterisk.org/r/2278
Review: https://reviewboard.asterisk.org/r/2058
patches:
on review 2058 uploaded by twilson
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@381527 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The core module related to coloring terminal output was old and needed
some love. The main thing here was an attempt to get rid of the
obscene number of stack-local buffers that were allocated for no other
reason than to colorize some output. Instead, this uses a simple trick
to allocate several buffers within threadlocal storage, then
automatically rotates between them, so that you can make multiple calls
to the colorization routine within one function and not need to
allocate multiple buffers.
Review: https://reviewboard.asterisk.org/r/2241/
Patches:
bug.patch uploaded by Tilghman Lesher
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@381448 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch adds the ability to create a serializer from a thread pool. A
serializer is a ast_taskprocessor with the same contract as a default
taskprocessor (tasks execute serially) except instead of executing out
of a dedicated thread, execution occurs in a thread from a
ast_threadpool. Think of it as a lightweight thread.
While it guarantees that each task will complete before executing the
next, there is no guarantee as to which thread from the pool individual
tasks will execute. This normally only matters if your code relys on
thread specific information, such as thread locals.
This patch also fixes a bug in how the 'was_empty' parameter is computed
for the push callback, and gets rid of the unused 'shutting_down' field.
Review: https://reviewboard.asterisk.org/r/2323/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@381326 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When the red/black tree work was committed, there was an extra ", " in
the REF_DEBUG definition of ao2_container_alloc_rbtree.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@381218 65c4cc65-6c06-0410-ace0-fbb531ad65f3
With ptlib 2.10.9, the configure script fails due to grep returning multiple
matches for the pattern it searches for. This patch updates the pattern
matching to return only the actual version for the symbol searched for,
PTLIB_VERSION.
(closes issue ASTERISK-20980)
Reported by: Stefan Reuter
patches:
ASTERISK-20980-1.patch uploaded by Stefan Reuter (license 5339)
........
Merged revisions 380297 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 380298 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@380299 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Sorcery is a unifying data access layer which provides a pluggable mechanism to allow
object creation, retrieval, updating, and deletion using different backends (or wizards).
This is a fancy way of saying "one interface to rule them all" where them is configuration,
realtime, and anything else that comes along.
Review: https://reviewboard.asterisk.org/r/2259/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@380069 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch adds the capability for asynchronous manipulation of audio being
played back to a channel though a new AMI action "ControlPlayback". The
ControlPlayback action supports a number of operations, the availability of
which depend on the application being used to send audio to the channel.
When the audio playback was initiated using the ControlPlayback application
or CONTROL STREAM FILE AGI command, the audio can be paused, stopped,
restarted, reversed, or skipped forward. When initiated by other mechanisms
(such as the Playback application), the audio can be stopped, reversed, or
skipped forward.
Review: https://reviewboard.asterisk.org/r/2265/
(closes issue ASTERISK-20882)
Reported by: mjordan
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@379830 65c4cc65-6c06-0410-ace0-fbb531ad65f3
* Add a max_size option for threadpools. Also added a test for this option.
* Fixed comments to be more accurate and have fewer typos.
* Updated copyright dates on new files.
git-svn-id: https://origsvn.digium.com/svn/asterisk/team/mmichelson/threadpool@379375 65c4cc65-6c06-0410-ace0-fbb531ad65f3
* Clarify some documentation
* Change copyright date of taskprocessor files
* Address potential issue of creating taskprocessor with listener if
taskprocessor with that name exists already
git-svn-id: https://origsvn.digium.com/svn/asterisk/team/mmichelson/threadpool@379124 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Now user data is allocated by the creator of the taskprocessor
listener and that user data is passed into ast_taskprocessor_listener_alloc().
Similarly, freeing of the user data is left up to the user himself. He can
free the data when the taskprocessor shuts down, or he can choose to hold
onto it if it makes sense to do so.
This, unsurprisingly, makes threadpool allocation a LOT cleaner now.
git-svn-id: https://origsvn.digium.com/svn/asterisk/team/mmichelson/threadpool@379120 65c4cc65-6c06-0410-ace0-fbb531ad65f3
file:///srv/subversion/repos/asterisk/trunk
................
r379021 | dlee | 2013-01-14 09:29:22 -0600 (Mon, 14 Jan 2013) | 15 lines
Fix XML encoding of 'identity display' in NOTIFY messages, continued.
When r378933 was merged into 1.8, it should have also escaped
remote_display, since it will have the same XML encoding problem when
the caller/callee roles are reversed.
(closes issue ABE-2902)
Reported by: Guenther Kelleter
........
Merged revisions 379001 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 379020 from http://svn.asterisk.org/svn/asterisk/branches/11
................
r379023 | dlee | 2013-01-14 09:58:01 -0600 (Mon, 14 Jan 2013) | 20 lines
Masquerades are an insane implementation detail within Asterisk. It generates
a number of useless and confusing events, and manipulates channels in a way
that semantically doesn't make sense. I've given a fairly thorough review of
masquerade code and its usage on the wiki at
https://wiki.asterisk.org/wiki/x/IwBRAQ.
While ultimately it makes the most sense to abandon masquerades altogether,
it will take some time to completely irradicate. Even then, there may always
be code that's not worth rewriting to get rid of the masquerade.
This patch does two things to make masquerades slightly less insane:
* When swapping the names of the original and clone channel, only emit a
single rename event of original -> original<ZOMBIE>. The original code
issued three rename events to accomplish the same end.
* In addition to swapping the names of the channels, also swap their
uniqueid's. This allows the 'Uniqueid' field to be used as a stable
identifier for a channel from and external interface, such as AMI.
Review: https://reviewboard.asterisk.org/r/2266/
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/team/mmichelson/threadpool@379032 65c4cc65-6c06-0410-ace0-fbb531ad65f3
file:///srv/subversion/repos/asterisk/trunk
................
r378935 | dlee | 2013-01-12 00:43:37 -0600 (Sat, 12 Jan 2013) | 41 lines
Fix XML encoding of 'identity display' in NOTIFY messages.
XML encoding in chan_sip is accomplished by naively building the XML
directly from strings. While this usually works, it fails to take into
account escaping the reserved characters in XML.
This patch adds an 'ast_xml_escape' function, which works similarly to
'ast_uri_encode'. This is used to properly escape the local_display
attribute in XML formatted NOTIFY messages.
Several things to note:
* The Right Thing(TM) to do would probably be to replace the
ast_build_string stuff with building an ast_xml_doc. That's a much
bigger change, and out of scope for the original ticket, so I
refrained myself.
* It is with great sadness that I wrote my own ast_xml_escape
function. There's one in libxml2, but it's knee-deep in
libxml2-ness, and not easily used to one-off escape a
string.
* I only escaped the string we know is causing problems
(local_display). At least some of the other strings are
URI-encoded, which should be XML safe. Rather than figuring out
what's safe and escaping what's not, it would be much cleaner to
simply build an ast_xml_doc for the messages and let the XML
library do the XML escaping. Like I said, that's out of scope.
(closes issue ABE-2902)
Reported by: Guenther Kelleter
Tested by: Guenther Kelleter
Review: http://reviewboard.digium.internal/r/365/
........
Merged revision 378919 from https://origsvn.digium.com/svn/asterisk/be/branches/C.3-bier
........
Merged revisions 378933 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 378934 from http://svn.asterisk.org/svn/asterisk/branches/11
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/team/mmichelson/threadpool@378946 65c4cc65-6c06-0410-ace0-fbb531ad65f3
file:///srv/subversion/repos/asterisk/trunk
................
r378915 | dlee | 2013-01-11 16:31:42 -0600 (Fri, 11 Jan 2013) | 21 lines
Add JSON API for Asterisk.
This provides a JSON API by pulling in and wrapping the Jansson JSON
library[1]. The Asterisk API basically mirrors the Jansson
functionality, with a few minor tweaks.
* Some names have been asteriskified to protect the innocent.
* Jansson provides both reference-stealing and reference-borrowing
versions of several API's. The Asterisk API is exclusively
reference-stealing for operations that put elements into arrays and
objects.
* No support for doubles, since we usually don't need that.
* Coming along for the ride is the ast_test_validate macro, which made
the unit tests much easier to write.
[1]: http://www.digip.org/jansson/
(issue ASTERISK-20887)
(closes issue ASTERISK-20888)
Review: https://reviewboard.asterisk.org/r/2264/
................
r378918 | file | 2013-01-11 17:05:38 -0600 (Fri, 11 Jan 2013) | 11 lines
Retain XMPP filters across reconnections so external modules continue to function as expected.
Previously if an XMPP client reconnected any filters added by an external module were lost.
This issue exhibited itself with chan_motif not receiving and reacting to Jingle signaling.
(closes issue ASTERISK-20916)
Reported by: kuj
........
Merged revisions 378917 from http://svn.asterisk.org/svn/asterisk/branches/11
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/team/mmichelson/threadpool@378927 65c4cc65-6c06-0410-ace0-fbb531ad65f3
file:///srv/subversion/repos/asterisk/trunk
................
r378783 | dlee | 2013-01-09 14:30:33 -0600 (Wed, 09 Jan 2013) | 14 lines
Fix end condition in ast_rtp_lookup_mime_multiple2.
The erroneous end condition would never include the AST_RTP_CISCO_DTMF flag
in the debug output.
(closes issue ASTERISK-20772)
Reported by: Xavier Hienne
........
Merged revisions 378776 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 378780 from http://svn.asterisk.org/svn/asterisk/branches/11
................
r378789 | rmudgett | 2013-01-09 14:56:23 -0600 (Wed, 09 Jan 2013) | 4 lines
* Found some more places to use ast_channel_lock_both().
* Minor optimization in ast_rtp_instance_early_bridge().
................
r378790 | rmudgett | 2013-01-09 15:14:39 -0600 (Wed, 09 Jan 2013) | 4 lines
* Whitespace changes.
* Made ast_test_init() match its prototype.
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/team/mmichelson/threadpool@378801 65c4cc65-6c06-0410-ace0-fbb531ad65f3
* Remove extraneous whitespace
* Bump up debug levels of messages and add identifying info to messages.
* Account for potential failures of ao2_link()
* Add additional test and some more test data
* Add some comments in places where they could be useful
* Make threadpool listeners and their callbacks optional
git-svn-id: https://origsvn.digium.com/svn/asterisk/team/mmichelson/threadpool@378652 65c4cc65-6c06-0410-ace0-fbb531ad65f3
file:///srv/subversion/repos/asterisk/trunk
................
r378374 | rmudgett | 2013-01-02 15:23:16 -0600 (Wed, 02 Jan 2013) | 33 lines
Fix AMI redirect action with two channels failing to redirect both channels.
The AMI redirect action can fail to redirect two channels that are bridged
together. There is a race between the AMI thread redirecting the two
channels and the bridge thread noticing that a channel is hungup from the
redirects.
* Made the bridge wait for both channels to be redirected before exiting.
* Made the AMI redirect check that all required headers are present before
proceeding with the redirection.
* Made the AMI redirect require that any supplied ExtraChannel exist
before proceeding. Previously the code fell back to a single channel
redirect operation.
(closes issue ASTERISK-18975)
Reported by: Ben Klang
(closes issue ASTERISK-19948)
Reported by: Brent Dalgleish
Patches:
jira_asterisk_19948_v11.patch (license #5621) patch uploaded by rmudgett
Tested by: rmudgett, Thomas Sevestre, Deepak Lohani, Kayode
Review: https://reviewboard.asterisk.org/r/2243/
........
Merged revisions 378356 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 378358 from http://svn.asterisk.org/svn/asterisk/branches/11
................
r378377 | mjordan | 2013-01-02 16:10:32 -0600 (Wed, 02 Jan 2013) | 24 lines
Prevent crashes from occurring when reading from data sources with large values
When reading configuration data from an Asterisk .conf file or when pulling
data from an Asterisk RealTime backend, Asterisk was copying the data on the
stack for manipulation. Unfortunately, it is possible to read configuration
data or realtime data from some data source that provides a large blob of
characters. This could potentially cause a crash via a stack overflow.
This patch prevents large sets of data from being read from an ARA backend or
from an Asterisk conf file.
(issue ASTERISK-20658)
Reported by: wdoekes
Tested by: wdoekes, mmichelson
patches:
* issueA20658_dont_process_overlong_config_lines.patch uploaded by wdoekes (license 5674)
* issueA20658_func_realtime_limit.patch uploaded by wdoekes (license 5674)
........
Merged revisions 378375 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 378376 from http://svn.asterisk.org/svn/asterisk/branches/11
................
r378384 | mjordan | 2013-01-02 16:19:32 -0600 (Wed, 02 Jan 2013) | 11 lines
Clean up app_mysql's application entry points to properly parse arguments
When parsing arguments, application entry points should not attempt to
directly modify the parameters to the function. This patch properly duplicates
the passed in parameters before attempting to parse them.
(issue ASTERISK-20658)
Reported by: wdoekes
patches:
issueA20658_sanitize_app_mysql.patch uploaded by wdoekes (license 5674)
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/team/mmichelson/threadpool@378385 65c4cc65-6c06-0410-ace0-fbb531ad65f3
file:///srv/subversion/repos/asterisk/trunk
................
r378322 | mjordan | 2013-01-02 12:11:59 -0600 (Wed, 02 Jan 2013) | 33 lines
Prevent exhaustion of system resources through exploitation of event cache
Asterisk maintains an internal cache for devices in the event subsystem. The
device state cache holds the state of each device known to Asterisk, such that
consumers of device state information can query for the last known state for
a particular device, even if it is not part of an active call. The concept of
a device in Asterisk can include entities that do not have a physical
representation. One way that this occurred was when anonymous calls are allowed
in Asterisk. A device was automatically created and stored in the cache for
each anonymous call that occurred; this was possible in the SIP and IAX2
channel drivers and through channel drivers that utilized the
res_jabber/res_xmpp resource modules (Gtalk, Jingle, and Motif). These devices
are never removed from the system, allowing anonymous calls to potentially
exhaust a system's resources.
This patch changes the event cache subsystem and device state management to
no longer cache devices that are not associated with a physical entity.
(issue ASTERISK-20175)
Reported by: Russell Bryant, Leif Madsen, Joshua Colp
Tested by: kmoore
patches:
event-cachability-3.diff uploaded by jcolp (license 5000)
........
Merged revisions 378303 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 378320 from http://svn.asterisk.org/svn/asterisk/branches/10
........
Merged revisions 378321 from http://svn.asterisk.org/svn/asterisk/branches/11
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/team/mmichelson/threadpool@378329 65c4cc65-6c06-0410-ace0-fbb531ad65f3
file:///srv/subversion/repos/asterisk/trunk
................
r378000 | seanbright | 2012-12-13 15:20:32 -0600 (Thu, 13 Dec 2012) | 8 lines
Make generate_exchange_uuid() always return the passed ast_str pointer.
I changed this code earlier to return NULL if it wasn't able to generate a UUID,
whereas the earlier code would always return the ast_str that was passed in.
Switch back to returning the ast_str, only set it to the empty string instead if
UUID generation fails. We still do a validity check later which will catch this
and blow up if necessary.
................
r378001 | wedhorn | 2012-12-13 15:25:31 -0600 (Thu, 13 Dec 2012) | 9 lines
Minor fixes for chan_skinny
Whitespace, change SUBSTATE_ONHOOK to correct SKINNY_ONHOOK and
correct len of 2 strcmp in skinny_setdebug(). (see opticron's review
on https://reviewboard.asterisk.org/r/2240/)
........
Merged revisions 377991 from http://svn.asterisk.org/svn/asterisk/branches/11
................
r378002 | rmudgett | 2012-12-13 15:28:15 -0600 (Thu, 13 Dec 2012) | 35 lines
confbridge: Fix MOH on simultaneous user entry to a new conference.
When two users entered a new conference simultaneously, one of the callers
hears MOH. This happened if two unmarked users entered simultaneously and
also if a waitmarked and a marked user entered simultaneously.
* Created a confbridge internal MOH API to eliminate the inlined MOH
handling code. Note that the conference mixing bridge needs to be locked
when actually starting/stopping MOH because there is a small window
between the conference join unsuspend MOH and actually joining the mixing
bridge.
* Created the concept of suspended MOH so it can be interrupted while
conference join announcements to the user and DTMF features can operate.
* Suspend any MOH until the user is about to actually join the mixing
bridge of the conference. This way any pre-join file playback does not
need to worry about MOH.
* Made post-join actions only play deferred entry announcement files.
Changing the user/conference state during that time is not protected or
controlled by the state machine.
(closes issue ASTERISK-20606)
Reported by: Eugenia Belova
Tested by: rmudgett
Review: https://reviewboard.asterisk.org/r/2232/
........
Merged revisions 377992 from http://svn.asterisk.org/svn/asterisk/branches/10
........
Merged revisions 377993 from http://svn.asterisk.org/svn/asterisk/branches/11
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/team/mmichelson/threadpool@378003 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The documentation for taskprocessors was incorrect with
regards to when a listener's alloc callback was called.
I also made the names of queued function calls in the
threadpool more uniform.
git-svn-id: https://origsvn.digium.com/svn/asterisk/team/mmichelson/threadpool@377802 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Unfortunately, this required a taskprocessor listener change that makes listener allocation
utterly silly. I'm going to change the scheme so that allocation of taskprocessor listeners
is done internally within taskprocessor code. This will make it parallel with threadpool
code, which is a good thing.
git-svn-id: https://origsvn.digium.com/svn/asterisk/team/mmichelson/threadpool@377687 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The only test added so far is an idle thread timeout
option. This will greatly aid threadpool users who wish
to maintain a threadpool by allowing for idle threads to
die out as necessary.
Test passes.
git-svn-id: https://origsvn.digium.com/svn/asterisk/team/mmichelson/threadpool@377580 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The new thread creation test fails because Asterisk locks up
while trying to lock a taskprocessor.
While trying to debug that, I found a race condition during taskprocessor
creation where a default taskprocessor listener could try to operate on
a partially started taskprocessor. This was fixed by adding a new callback
to taskprocessor listeners.
Then while testing that change, I found some bugs in the taskprocessor
tests where I was not properly unlocking when done with a lock. Scoped
locks have spoiled me a bit.
I still have not figured out why the threadpool thread creation test
is locking up.
git-svn-id: https://origsvn.digium.com/svn/asterisk/team/mmichelson/threadpool@377368 65c4cc65-6c06-0410-ace0-fbb531ad65f3
After giving it some consideration, there's no real
use for zombie threads. Listeners can't really use the
current number of zombie threads as a way of gauging activity,
zombifying threads is just an extra step before they die that
really serves no purpose, and since there's no way to re-animate
zombies, the operation does not need to be around.
I also fixed up some miscellaneous compilation errors that
were lingering from some past revisions.
git-svn-id: https://origsvn.digium.com/svn/asterisk/team/mmichelson/threadpool@377211 65c4cc65-6c06-0410-ace0-fbb531ad65f3
file:///srv/subversion/repos/asterisk/trunk
................
r376589 | mjordan | 2012-11-22 18:02:23 -0600 (Thu, 22 Nov 2012) | 29 lines
Re-initialize logmsgs mutex upon logger initialization to prevent lock errors
Similar to the patch that moved the fork earlier in the startup sequence to
prevent mutex errors in the recursive mutex surrounding the read/write thread
registration lock, this patch re-initializes the logmsgs mutex. Part of the
start up sequence before forking the process into the background includes
reading asterisk.conf; this has to occur prior to the call to daemon in order
to read startup parameters. When reading in a conf file, log statements can
be generated. Since this can't be avoided, the mutex instead is
re-initialized to ensure a reset of any thread tracking information.
This patch also includes some additional debugging to catch errors when
locking or unlocking the recursive mutex that surrounds locks when the
DEBUG_THREADS build option is enabled. DO_CRASH or THREAD_CRASH will
cause an abort() if a mutex error is detected.
(issue ASTERISK-19463)
Reported by: mjordan
Tesetd by: mjordan
........
Merged revisions 376586 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 376587 from http://svn.asterisk.org/svn/asterisk/branches/10
........
Merged revisions 376588 from http://svn.asterisk.org/svn/asterisk/branches/11
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/team/mmichelson/threadpool@376596 65c4cc65-6c06-0410-ace0-fbb531ad65f3
file:///srv/subversion/repos/asterisk/trunk
........
r376575 | rmudgett | 2012-11-21 12:33:16 -0600 (Wed, 21 Nov 2012) | 20 lines
Add red-black tree container type to astobj2.
* Add red-black tree container type.
* Add CLI command "astobj2 container dump <name>"
* Added ao2_container_dump() so the container could be dumped by other
modules for debugging purposes.
* Changed ao2_container_stats() so it can be used by other modules like
ao2_container_check() for debugging purposes.
* Updated the unit tests to check red-black tree containers.
(closes issue ASTERISK-19970)
Reported by: rmudgett
Tested by: rmudgett
Review: https://reviewboard.asterisk.org/r/2110/
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/team/mmichelson/threadpool@376580 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This helps account for the fact that it is unknown just
how many references may exist for a given taskprocessor
listener, so simply unreffing it from the taskprocessor
shutdown function is not enough to convey the gravity
of the situation.
By putting in a shutdown callback, it now becomes clear
to the listener not to try to do any further operations
on the taskprocessor.
git-svn-id: https://origsvn.digium.com/svn/asterisk/team/mmichelson/threadpool@376381 65c4cc65-6c06-0410-ace0-fbb531ad65f3
file:///srv/subversion/repos/asterisk/trunk
................
r376341 | dlee | 2012-11-15 18:08:00 -0600 (Thu, 15 Nov 2012) | 34 lines
Migrate hashtest/hashtest2 to be unit tests.
Both hashtest and hashtest2 are manual testing apps that thrash hash
tables (hashtab and ao2 containers, respectively), by spinning up
several threads that randomly insert, delete, lookup and iterate over
the hash table. If the app doesn't crash, the hash table probably passes
the test. Those utils are not a part of the typical Asterisk build, so
they do not usually get compiled. This all makes them less that useful.
This patch removes those manual test programs and replaces them with
Asterisk unit test modules (test_{hashtab,astobj2}_thrash.so). It also
attempts to make the tests more deterministic.
* Rather than spinning up some number of threads that operate on the
hash table randomly, spin up four threads that concurrenly add,
remove, lookup and iterate over the hash table.
* Each thread checks the state of the hash table both during and after
execution, and indicates a test failure if things are not as expected.
* Each thread times out after 60 seconds to prevent deadlocking the unit
test run.
(closes issue ASTERISK-20505)
Reported by: Matt Jordan
Review: https://reviewboard.asterisk.org/r/2189/
........
Merged revisions 376306 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 376315 from http://svn.asterisk.org/svn/asterisk/branches/10
........
Merged revisions 376339 from http://svn.asterisk.org/svn/asterisk/branches/11
................
r376344 | dlee | 2012-11-15 18:14:00 -0600 (Thu, 15 Nov 2012) | 1 line
Somehow I put in svn-1.6 merge information. Oops.
................
r376345 | dlee | 2012-11-15 18:15:30 -0600 (Thu, 15 Nov 2012) | 15 lines
Fixed extconf.c breakage introduced in r376306.
To quote wdoekes:
> Note that I'm not confirming legitimacy of having that file in tree at
> all. Is anyone using aelparse/conf2ael?
........
Merged revisions 376340 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 376342 from http://svn.asterisk.org/svn/asterisk/branches/10
........
Merged revisions 376343 from http://svn.asterisk.org/svn/asterisk/branches/11
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/team/mmichelson/threadpool@376352 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Taskprocessors are now divided into two units: the task queue
and their listeners.
When a task is added to the queue, the listener is notified and
can take whatever action is desired. This means that taskprocessors
are no longer confined to having their tasks executed within a
single thread.
A default taskprocessor listener has been added that mirrors the
old taskprocessor behavior.
I've tested it by running Asterisk and placing calls. It appears
to work as expected. I'm going to do some cleaning up first and
then write some unit tests to be sure everything works as expected.
git-svn-id: https://origsvn.digium.com/svn/asterisk/team/mmichelson/threadpool@376118 65c4cc65-6c06-0410-ace0-fbb531ad65f3
file:///srv/subversion/repos/asterisk/trunk
................
r376049 | rmudgett | 2012-11-08 11:38:31 -0600 (Thu, 08 Nov 2012) | 41 lines
Add MALLOC_DEBUG enhancements.
* Makes malloc() behave like calloc(). It will return a memory block
filled with 0x55. A nonzero value.
* Makes free() fill the released memory block and boundary fence's with
0xdeaddead. Any pointer use after free is going to have a pointer
pointing to 0xdeaddead. The 0xdeaddead pointer is usually an invalid
memory address so a crash is expected.
* Puts the freed memory block into a circular array so it is not reused
immediately.
* When the circular array rotates out a memory block to the heap it checks
that the memory has not been altered from 0xdeaddead.
* Made the astmm_log message wording better.
* Made crash if the DO_CRASH menuselect option is enabled and something is
found.
* Fixed a potential alignment issue on 64 bit systems.
struct ast_region.data[] should now be aligned correctly for all
platforms.
* Extracted region_check_fences() from __ast_free_region() and
handle_memory_show().
* Updated handle_memory_show() CLI usage help.
Review: https://reviewboard.asterisk.org/r/2182/
........
Merged revisions 376029 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 376030 from http://svn.asterisk.org/svn/asterisk/branches/10
........
Merged revisions 376048 from http://svn.asterisk.org/svn/asterisk/branches/11
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/team/mmichelson/threadpool@376054 65c4cc65-6c06-0410-ace0-fbb531ad65f3
........
r375993 | mmichelson | 2012-11-07 11:01:13 -0600 (Wed, 07 Nov 2012) | 30 lines
Fix misuses of timeouts throughout the code.
Prior to this change, a common method for determining if a timeout
was reached was to call a function such as ast_waitfor_n() and inspect
the out parameter that told how many milliseconds were left, then use
that as the input to ast_waitfor_n() on the next go-around.
The problem with this is that in some cases, submillisecond timeouts
can occur, resulting in the out parameter not decreasing any. When this
happens thousands of times, the result is that the timeout takes much
longer than intended to be reached. As an example, I had a situation where
a 3 second timeout took multiple days to finally end since most wakeups
from ast_waitfor_n() were under a millisecond.
This patch seeks to fix this pattern throughout the code. Now we log the
time when an operation began and find the difference in wall clock time
between now and when the event started. This means that sub-millisecond timeouts
now cannot play havoc when trying to determine if something has timed out.
Part of this fix also includes changing the function ast_waitfor() so that it
is possible for it to return less than zero when a negative timeout is given
to it. This makes it actually possible to detect errors in ast_waitfor() when
there is no timeout.
(closes issue ASTERISK-20414)
reported by David M. Lee
Review: https://reviewboard.asterisk.org/r/2135/
........
r375994 | mmichelson | 2012-11-07 11:08:44 -0600 (Wed, 07 Nov 2012) | 3 lines
Remove some debugging that accidentally made it in the last commit.
........
Merged revisions 375993-375994 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 375995 from http://svn.asterisk.org/svn/asterisk/branches/10
........
Merged revisions 376014 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@376015 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Currently, if an acknowledgement of a timer fails Asterisk will not realize
that a serious error occurred and will continue attempting to use the timer's
file descriptor. This can lead to situations where errors stream to the
CLI/log file. This consumes significant resources, masks the actual problem
that occurred (whatever caused the timer to fail in the first place), and
can leave channels in odd states.
This patch propagates the errors in the timing resource modules up through
the timer core, and makes users of these timers handle acknowledgement
failures. It also adds some defensive coding around the use of timers
to prevent using bad file descriptors in off nominal code paths.
Note that the patch created by the issue reporter was modified slightly for
this commit and backported to 1.8, as it was originally written for
Asterisk 10.
Review: https://reviewboard.asterisk.org/r/2178/
(issue ASTERISK-20032)
Reported by: Jeremiah Gowdy
patches:
jgowdy-timerfd-6-22-2012.diff uploaded by Jeremiah Gowdy (license 6358)
........
Merged revisions 375893 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 375894 from http://svn.asterisk.org/svn/asterisk/branches/10
........
Merged revisions 375895 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@375896 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Make git more attractive for managing work-in-progress. Especially
convenient when a potential patch set needs to be tested on multiple
platforms since one can use git to keep all the test environments in sync
independent of a subversion server.
Now the Asterisk version will show the exact git SHA5 that was used when
building (still appended by "M" if there are local modifications) from a
git clone of the Asterisk repository so the developer can more easily know
what is actually under test.
You will now get this:
$ asterisk -V
Asterisk GIT-1698298
Instead of this:
$ asterisk -V
Asterisk UNKNOWN__and_probably_unsupported
This has zero impact for those not using git with the exception of an
extra test in the configure script to gather git's path. This is
necessary to prevent "sudo make install" from failing since git may not be
in the path in make's shell environment.
(closes issue ASTERISK-20483)
Reported by: Shaun Ruffell
Patches:
0001-build_tools-Allow-Asterisk-to-report-git-SHAs-in-ver.patch (license #5417) patch uploaded by Shaun Ruffell
Modified
........
Merged revisions 375189 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 375190 from http://svn.asterisk.org/svn/asterisk/branches/10
........
Merged revisions 375191 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@375192 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Update and extend the configuration_file group and enable linking. Commit other cleanups from multi-version Doxygen testing. Update title that was left behind many years ago.
(issue ASTERISK-20259)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@375182 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Passing an ast_str pointer by value that then calls
ast_str_set(), ast_str_set_va(), ast_str_append(), or
ast_str_append_va() can result in the pointer originally
passed by value being invalidated if the ast_str had
to be reallocated.
This fixes places in the code that do this. Only the
example in ccss.c could result in pointer invalidation
though since the other cases use a stack-allocated ast_str
and cannot be reallocated.
I've also updated the doxygen in strings.h to include
notes about potential misuse of the functions mentioned
previously.
Review: https://reviewboard.asterisk.org/r/2161
........
Merged revisions 375025 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 375026 from http://svn.asterisk.org/svn/asterisk/branches/10
........
Merged revisions 375027 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@375044 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This is used to solve an issue where a poll on a file
descriptor does not necessarily correspond to the readiness
of a FILE handle to be read.
This change makes it so that for TCP connections, we do a
recv() on the file descriptor instead.
Because TCP does not guarantee that an entire message or even
just one single message will arrive during a read, a loop has
been introduced to ensure that we only attempt to handle a
single message at a time. The tcptls_session_instance structure
has also had an overflow buffer added to it so that if more
than one TCP message arrives in one go, there is a place to
throw the excess.
Huge thanks goes out to Walter Doekes for doing extensive review
on this change and finding edge cases where code could fail.
(closes issue ASTERISK-20212)
reported by Phil Ciccone
Review: https://reviewboard.asterisk.org/r/2123
........
Merged revisions 374905 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 374906 from http://svn.asterisk.org/svn/asterisk/branches/10
........
Merged revisions 374914 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@374924 65c4cc65-6c06-0410-ace0-fbb531ad65f3
During testing, it was discovered that having chan_sip
export global symbols was problematic.
The biggest problem was that load order was affected.
Trying to use realtime could be problematic since in
all likelihood the necessary realtime driver(s) would
not be loaded before chan_sip.
In addition, it was found that it was impossible to
use the Digium Phone Module for Asterisk since it
must be loaded before chan_sip since it must hook
into chan_sip's configuration parsing.
The solution is to use a virtual table in the same
manner that other modules in Asterisk do, like
app_voicemail.
(closes issue ASTERISK-20545)
Reported by: kmoore
........
Merged revisions 374842 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@374849 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Greenlight in #asterisk brought up that he was receiving an error message "Could
not create persistent member string, out of space" when running app_queue in
Asterisk 10. dump_queue_members() made an assumption that 8K would be enough to
store the generated string, but with queues that have large member lists this is
not always the case. This patch removes the limitation and uses ast_str instead
of a fixed sized buffer.
The complicating factor comes from the fact that ast_db_get requires a buffer
and buffer size argument, which doesn't let us pull back more than what we pass
in, so I introduced a new ast_db_get_allocated() which returns an ast_strdup()'d
copy of the value from astdb.
As an aside, I did some testing on the maximum size of data that we can store in
the BDB library we distribute and was able to store a 10MB string and retrieve
it with no problems, so I feel this is a safe patch.
Review: https://reviewboard.asterisk.org/r/2136/
........
Merged revisions 374108 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 374135 from http://svn.asterisk.org/svn/asterisk/branches/10
........
Merged revisions 374150 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@374151 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This allows for the REDIRECTING dialplan function to be
used to set the reason to any string.
The SIP channel driver has been modified to set the redirecting
reason string to the value received in a Diversion header. In
addition, SIP 480 response reason text will set the redirecting
reason as well.
(closes issue AST-942)
reported by Malcolm Davenport
(closes issue AST-943)
reported by Malcolm Davenport
Review: https://reviewboard.asterisk.org/r/2101
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@373701 65c4cc65-6c06-0410-ace0-fbb531ad65f3
* Whitespace, doc-blocks, spelling, case, missing and incorrect tags.
* Add cleanup to Makefile for the Doxygen configuration update
* Start updating Doxygen configuration for cleaner output
* Enable inclusion of configuration files into documentation
* remove mantisworkflow...
* update documentation README
* Add markup to Tilghman's email and talk with him about updating his email, he knows...
* no code changes on this commit other than the mentioned Makefile change
(issue ASTERISK-20259)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@373384 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Doxygen updates including mistakes, misspellings, missing parameters, updates for Doxygen style. Some missing txt file links are removed but their content or essense will be included in some later updates. A majority of the txt files were removed in the 1.6 era but never noted. The HR and EXTREF are simple changes that make the documentation more compatable with more versions of Doxygen.
Further updates coming.
(issue ASTERISK-20259)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@373330 65c4cc65-6c06-0410-ace0-fbb531ad65f3
As mentioned on the review for this, WebRTC has moved towards choosing
DTLS-SRTP as the mechanism for key exchange for SRTP. This commit adds
support for this but makes it available for normal SIP clients as well.
Testing has been done to ensure that this introduces no regressions with
existing behavior and also that it functions as expected.
Review: https://reviewboard.asterisk.org/r/2113/
........
Merged revisions 373229 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@373234 65c4cc65-6c06-0410-ace0-fbb531ad65f3
* ASTERISK-20383
Missing named call pickup group features:
CHANNEL(callgroup) - Need CHANNEL(namedcallgroup)
CHANNEL(pickupgroup) - Need CHANNEL(namedpickupgroup)
Pickup() - Needs to also select from named pickup groups.
* ASTERISK-20384
Using the pickupexten, the pickup channel selection could fail even though
there was a call it could have picked up. In a call pickup race when
there are multiple calls to pickup and two extensions try to pickup a
call, it is conceivable that the loser will not pick up any call even
though it could have picked up the next oldest matching call.
Regression because of the named call pickup group feature.
* See ASTERISK-20386 for the implementation improvements. These are the
changes in channel.c and channel.h.
* Fixed some locking issues in CHANNEL().
(closes issue ASTERISK-20383)
Reported by: rmudgett
(closes issue ASTERISK-20384)
Reported by: rmudgett
(closes issue ASTERISK-20386)
Reported by: rmudgett
Tested by: rmudgett
Review: https://reviewboard.asterisk.org/r/2112/
........
Merged revisions 373220 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@373221 65c4cc65-6c06-0410-ace0-fbb531ad65f3
In order to use nested functions on some versions of GCC (e.g. GCC on OS X),
the -fnested-functions flag must be passed to the compiler. This patch adds
detection logic to ./configure to add the flag if necessary. It also adds
a comment to utils.h as to why the nested function needs a prototype.
(closes issue ASTERISK-20399)
Reported by: David M. Lee
Review: https://reviewboard.asterisk.org/r/2102/
........
Merged revisions 373119 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@373120 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The new API allows for sorted containers, insertion options, duplicate
handling options, and traversal order options.
* Adds the ability for containers to be sorted when they are created.
* Adds container creation options to handle duplicates when they are
inserted.
* Adds container creation option to insert objects at the beginning or end
of the container traversal order.
* Adds OBJ_PARTIAL_KEY to allow searching with a partial key. The partial
key works similarly to the OBJ_KEY flag. (The real search speed
improvement with this flag will come when red-black trees are added.)
* Adds container traversal and iteration order options: Ascending and
Descending.
* Adds an AST_DEVMODE compile feature to check the stats and integrity of
registered containers using the CLI "astobj2 container stats <name>" and
"astobj2 container check <name>". The channels container is normally
registered since it is one of the most important containers in the system.
* Adds ao2_iterator_restart() to allow iteration to be restarted from the
beginning.
* Changes the generic container object to have a v_method table pointer to
support other types of containers.
* Changes the container nodes holding objects to be ref counted.
The ref counted nodes and v_method table pointer changes pave the way to
allow other types of containers.
* Includes a large astobj2 unit test enhancement that tests the new
features.
(closes issue ASTERISK-19969)
Reported by: rmudgett
Review: https://reviewboard.asterisk.org/r/2078/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@372997 65c4cc65-6c06-0410-ace0-fbb531ad65f3
message.c makes use of a special message queue channel that exists
in thread storage. This channel never goes away due to the fact that
the taskprocessor used by message.c does not get shut down, meaning
that it never ends the thread that stores the channel.
This patch fixes the problem by shutting down the taskprocessor when
Asterisk is shut down. In addition, the thread storage has a destructor
that will release the channel reference when the taskprocessor is destroyed.
(closes issue AST-937)
Reported by Jason Parker
Patches:
AST-937.patch uploaded by Mark Michelson (License #5049)
Tested by Jason Parker
........
Merged revisions 372885 from http://svn.asterisk.org/svn/asterisk/branches/10
........
Merged revisions 372888 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@372891 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The previous fix still would look in the static_RTP_PT table, which
is inappropriate since we specifically want to find a codec that has
been negotiated.
(closes issue ASTERISK-20296)
reported by NITESH BANSAL
Patches:
codec_negotiation.patch Uploaded by NITESH BANSAL (License #6418)
........
Merged revisions 372311 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@372319 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch fixes numerous doxygen warnings across Asterisk. It also updates
the makefile to regenerate the doxygen configuration on the local system
before running doxygen to help prevent warnings/errors on the local system.
Much thanks to Andrew for tackling one of the Asterisk janitor projects!
(issue ASTERISK-20259)
Reported by: Andrew Latham
Patches:
doxygen_partial.diff uploaded by Andrew Latham (license 5985)
make_progdocs.diff uploaded by Andrew Latham (license 5985)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@371989 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The struct MD5Context character buffer is cast to an int32_t* without
making sure that said buffer is aligned.
Since the buffer follows two uint32_t's, the chance of 'in' being (32
bits) unaligned is nil in practice. But adding code to ensure that 'in'
stays aligned costs nothing and removes all doubts about the casts being
safe.
(closes issue ASTERISK-20241)
Reported by: Walter Doekes
Patches:
tmp.diff (license #5674) patch uploaded by Walter Doekes
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@371952 65c4cc65-6c06-0410-ace0-fbb531ad65f3
With the SCOPED_LOCK macro, you can create a variable
that locks a specific lock and unlocks the lock when the
variable goes out of scope. This is useful for situations
where many breaks, continues, returns, or other interruptions
would require separate unlock statements. With a scoped lock,
these aren't necessary.
There are specializations for mutexes, read locks, write locks,
ao2 locks, ao2 read locks, ao2 write locks, and channel locks.
Each of these is a SCOPED_LOCK at heart though.
Review: https://reviewboard.asterisk.org/r/2060
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@371582 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch adds the feature "Private representation of caller, connected
and redirecting party ids", as previously discussed with us (DATUS) and
Digium.
1. Feature motivation
Until now it is quite difficult to modify a party number or name which can
only be seen by exactly one particular instantiated technology channel
subscriber. One example where a modified party number or name on one
channel is spread over several channels are supplementary services like
call transfer or pickup. To implement these features Asterisk internally
copies caller and connected ids from one channel to another. Another
example are extension subscriptions. The monitoring entities (watchers)
are notified of state changes and - if desired - of party numbers or names
which represent the involving call parties. One major feature where a
private representation of party names is essentially needed, i.e. where a
party name shall be exclusively signaled to only one particular user, is a
private user-specific name resolution for party numbers. A lookup in a
private destination-dependent telephone book shall provide party names
which cannot be seen by any other user at any time.
2. Feature Description
This feature comes along with the implementation of additional private
party id elements for caller id, connected id and redirecting ids inside
Asterisk channels.
The private party id elements can be read or set by the user using
Asterisk dialplan functions.
When a technology channel is initiating a call, receives an internal
connected-line update event, or receives an internal redirecting update
event, it merges the corresponding public id with the private id to create
an effective party id. The effective party id is then used for protocol
signaling.
The channel technologies which initially support the private id
representation with this patch are SIP (chan_sip), mISDN (chan_misdn) and
PRI (chan_dahdi).
Once a private name or number on a channel is set and (implicitly) made
valid, it is generally used for any further protocol signaling until it is
rewritten or invalidated.
To simplify the invalidation of private ids all internally generated
connected/redirecting update events and also all connected/redirecting
update events which are generated by technology channels -- receiving
regarding protocol information - automatically trigger the invalidation of
private ids.
If not using the private party id representation feature at all, i.e. if
using only the 'regular' caller-id, connected and redirecting related
functions, the current characteristic of Asterisk is not affected by the
new extended functionality.
3. User interface Description
To grant access to the private name and number representation from the
Asterisk dialplan, the CALLERID, CONNECTEDLINE and REDIRECTING dialplan
functions are extended by the following data types. The formats of these
data types are equal to the corresponding regular 'non-private' already
existing data types:
CALLERID:
priv-all
priv-name priv-name-valid priv-name-charset priv-name-pres
priv-num priv-num-valid priv-num-plan priv-num-pres
priv-subaddr priv-subaddr-valid priv-subaddr-type priv-subaddr-odd
priv-tag
CONNECTEDLINE:
priv-name priv-name-valid priv-name-pres priv-name-charset
priv-num priv-num-valid priv-num-pres priv-num-plan
priv-subaddr priv-subaddr-valid priv-subaddr-type priv-subaddr-odd
priv-tag
REDIRECTING:
priv-orig-name priv-orig-name-valid priv-orig-name-pres priv-orig-name-charset
priv-orig-num priv-orig-num-valid priv-orig-num-pres priv-orig-num-plan
priv-orig-subaddr priv-orig-subaddr-valid priv-orig-subaddr-type priv-orig-subaddr-odd
priv-orig-tag
priv-from-name priv-from-name-valid priv-from-name-pres priv-from-name-charset
priv-from-num priv-from-num-valid priv-from-num-pres priv-from-num-plan
priv-from-subaddr priv-from-subaddr-valid priv-from-subaddr-type priv-from-subaddr-odd
priv-from-tag
priv-to-name priv-to-name-valid priv-to-name-pres priv-to-name-charset
priv-to-num priv-to-num-valid priv-to-num-pres priv-to-num-plan
priv-to-subaddr priv-to-subaddr-valid priv-to-subaddr-type priv-to-subaddr-odd
priv-to-tag
Reported by: Thomas Arimont
Review: https://reviewboard.asterisk.org/r/2030/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@371120 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Quote from review board:
This patch extends the extension state callbacks so that monitoring channels
(as chan_sip) get more information of the devices which are responsible for
an extension state change. The additional information is needed by chan_sip
to present names/numbers of the caller and callee in an early-state SIP
notification. Users of extenstion state callback not interested in the
additional information are not affected by the changes.
Motivation: to present the involved party's name/number in an early-state
nofification (used by the notified device as a pickup offer) one after another
so that a user can see which call he will pick up in an undirected pickup.
Such a pickup offer to a user shall indicate the same call (number/name-A calls
number/name-B) as the call which would be picked up when an undirected pickup
is executed.
Users interested in additional state info must use the new functions
ast_extension_state_add_extended() resp.
ast_extension_state_add_destroy_extended() to register an extended state
callback. When the callback is registered this way, an extra member
device_state_info of struct ast_state_cb_info is passed to the callback in
addition to the aggregated extension state. This container holds an object for
every device of the monitored extension hint consisting of the device name, the
device state and a channel reference to the channel which (presumably) caused
the device state.
The information is used by chan_sip for early-state notifications. When the
state of a device changes and the new state contains AST_EVENT_RINGING, an
early-state notification is sent to the subscribed devices with the
caller/callee names/numbers of the oldest ringing channel of the monitored
extension. The notified user may then invoke a direct pickup, which will pickup
exactly this channel.
Users of the old non-extended callbacks will only be called when the aggregated
state did change (same behavior as before). Users of the extended callback will
also be called when the state is unchanged but does contain AST_EVENT_RINGING.
That could be the case if two channels are ringing at one device and one of
them hangs up, so the aggregated state does not change. This way the monitoring
channel can create a new early-state notification with the now ringing
party-ids.
Review: https://reviewboard.asterisk.org/r/2048
This contribution comes from Guenther Kelleter
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@370979 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This is based on the work done by Olle Johansson on review board.
The idea is that the channel specified in an AMI originate or call
file is typically not connected to the outgoing extension until the
channel has been answered. With this change, an EarlyMedia header can
be specified for AMI originates and an early_media option can
be specified in call files. With this option set, once early media is
received on a channel, it will be connected with the outgoing extension.
(closes issue ASTERISK-18644)
Reported by Olle Johansson
Review: https://reviewboard.asterisk.org/r/1472
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@370951 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch adds named calledgroups/pickupgroups to Asterisk. Named groups are
implemented in parallel to the existing numbered callgroup/pickupgroup
implementation. However, unlike the existing implementation, which is limited
to a maximum of 64 defined groups, the number of defined groups allowed for
named callgroups/pickupgroups is effectively unlimited.
Named groups are configured with the keywords "namedcallgroup" and
"namedpickupgroup". This corresponds to the numbered group definitions of
"callgroup" and "pickupgroup". Note that as the implementation of named groups
coexists with the existing numbered implementation, a defined named group of
"4" does not equate to numbered group 4.
Support for the named groups has been added to the SIP, DAHDI, and mISDN channel
drivers.
Review: https://reviewboard.asterisk.org/r/2043
Uploaded by:
Guenther Kelleter(license #6372)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@370831 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch adds a new CLI command to the res_corosync module. It is primarily
used as a debugging tool. It lets you fire off an event which will cause
res_corosync on other nodes in the cluster to place messages into the logger if
everything is working ok. It verifies that the corosync communication is
working as expected.
I didn't put anything in the CHANGES file for this, because this module is new
in Asterisk 11. There is already a generic "res_corosync new module" entry in
there so I figure that covers it just fine.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@370535 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch changes the Asterisk configure script and build system to detect
the presence of the NetBSD editline library (libedit) on the system. If it is
found, it will be used in preference to the version included in the Asterisk
source tree.
(closes issue ASTERISK-18725)
Reported by: Jeffrey C. Ollie
Review: https://reviewboard.asterisk.org/r/1528/
Patches:
0001-Allow-linking-building-against-an-external-editline.patch uploaded by jcollie (license #5373) (heavily modified by kpfleming)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@370481 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch includes the following:
* Unit tests for the abstract Jitter Buffer API. This includes both fixed
and adaptive flavors, testing nominal creation, frame input, frame retrieval,
resyncing; off nominal frame input overflow, out of order, and others.
* Tweaks to the abstract_jb API to remove the unnecessary resync_threshold
parameter from the create function (resync_threshold is already in the
struct passed into the create function)
* Ensure the fixed jitter buffer is empty before destroying it, to avoid an
ASSERT
* Don't "resync" the adaptive jitter buffer. The mechanism that was being
used actually causes the jitter buffer to think its being overflowed by going
around the jitterbuf API and attempting to 'resynch' it improperly. If a
resync is needed, the jitter buffer will do it properly by itself. Note that
this is only an optimization needed for trunk, as the worst that happens is
the loss of three voice packets before the adaptive jitter buffer will resync
anyway.
Review: https://reviewboard.asterisk.org/r/2035
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@370387 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The HANGUPCAUSE hash (trunk only) meant to replace SIP_CAUSE has now
been replaced with the HANGUPCAUSE and HANGUPCAUSE_KEYS dialplan
functions to better facilitate access to the AST_CAUSE translations
for technology-specific cause codes. The HangupCauseClear application
has also been added to remove this data from the channel.
(closes issue SWP-4738)
Review: https://reviewboard.asterisk.org/r/2025/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@370316 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This fix involves moving the allocation of some temporary codec structures to the heap and also reduces the number of maximum payloads to something more sane for both regular and low memory builds.
(closes issue ASTERISK-20140)
Reported by: jonnt
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@370171 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The MWI and device state propagation code wrongly assumes that an XMPP client connection will remain established at all times. This fix corrects that by making the lifetime of the subscription the same as the lifetime of the connection itself. As the connection is established and disconnected the subscription itself is created and destroyed.
(closes issue ASTERISK-18078)
Reported by: elguero
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@370152 65c4cc65-6c06-0410-ace0-fbb531ad65f3