........
r204012 | mmichelson | 2009-06-29 10:04:17 -0500 (Mon, 29 Jun 2009) | 6 lines
Place unlock of mutex in an else block so that it does not get unlocked twice.
(closes issue #15400)
Reported by: aragon
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@204013 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r203908 | rmudgett | 2009-06-26 19:55:12 -0500 (Fri, 26 Jun 2009) | 16 lines
The ISDN CPE side should not exclusively pick B channels normally.
Before this patch, Asterisk unconditionally picked B channels exclusively
on the CPE side and normally allowed alternative B channels on the network
side. Now Asterisk does the opposite.
Reasons for the CPE side to normally not pick B channels exclusively:
* For CPE point-to-multipoint mode (i.e. phone side), the CPE side does
not have enough information to exclusively pick B channels. (There may be
other devices on the line.)
* Q.931 gives preference to the network side picking B channels.
* Some telcos require the CPE side to not pick B channels exclusively.
(closes issue #14383)
Reported by: mbrancaleoni
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@203909 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The original patch for this was written by Brett Bryant, and I split it out into
it's own module.
(closes issue #12876)
Reported by: bbryant
Patches:
06162008_cdr_custom_syslog.diff uploaded by bbryant (license 36)
05212009_cdr_syslog.patch uploaded by seanbright (license 71)
Tested by: seanbright
Review: https://reviewboard.asterisk.org/r/297/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@203846 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r203785 | russell | 2009-06-26 16:16:39 -0500 (Fri, 26 Jun 2009) | 15 lines
Don't fast forward past the end of a message.
This is nice change for users of the voicemail application. If someone gets a
little carried away with fast forwarding through a message, they can easily
get to the end and accidentally exit the voicemail application by hitting the
fast forward key during the following prompt.
This adds some safety by not allowing a fast forward past the end of a message.
(closes issue #14554)
Reported by: lacoursj
Patches:
21761.patch uploaded by lacoursj (license 707)
Tested by: lacoursj
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@203802 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Max silence was represented in milliseconds, yet vmminsecs (minmessage) was represented
as seconds.
Also, the inequality was reversed. The warning, if triggered, was "Max silence should
be less than minmessage or you may get empty messages", which should have been logged
if max silence was greater than minmessage, but the check was for less than.
Also, conforming if statement to coding guidelines.
closes issue #15331)
Reported by: markd
Review: https://reviewboard.asterisk.org/r/293/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@203721 65c4cc65-6c06-0410-ace0-fbb531ad65f3
........
r203719 | dbrooks | 2009-06-26 15:03:42 -0500 (Fri, 26 Jun 2009) | 16 lines
Fixing voicemail's error in checking max silence vs min message length
Max silence was represented in milliseconds, yet vmminsecs (minmessage) was represented
as seconds.
Also, the inequality was reversed. The warning, if triggered, was "Max silence should
be less than minmessage or you may get empty messages", which should have been logged
if max silence was greater than minmessage, but the check was for less than.
Also, conforming if statement to coding guidelines.
closes issue #15331)
Reported by: markd
Review: https://reviewboard.asterisk.org/r/293/
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@203720 65c4cc65-6c06-0410-ace0-fbb531ad65f3
after a polarity reversal.
Previously on a polarity switch event chan_dahdi would set the channel
immediately as answered. This would cause problems if a polarity reversal
occurred when the line was picked up as the dial would not have yet occurred.
Now if the polarity reversal occurs before delay has elapsed after coming off
hook or an answer, it is ignored. Also, some refactoring was done in
_handle_event.
(closes issue #13917)
Reported by: alecdavis
Patches:
chan_dahdi.bug13917.feb09.diff2.txt uploaded by alecdavis (license 585)
Tested by: alecdavis
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@203672 65c4cc65-6c06-0410-ace0-fbb531ad65f3
CEL is the new system for logging channel events. This was inspired after
facing many problems trying to represent what is possible to happen to a call
in Asterisk using CDR records. For more information on CEL, see the built in
HTML or PDF documentation generated from the files in doc/tex/.
Many thanks to Steve Murphy (murf) and Brian Degenhardt (bmd) for their hard
work developing this code. Also, thanks to Matt Nicholson (mnicholson) and
Sean Bright (seanbright) for their assistance in the final push to get this
code ready for Asterisk trunk.
Review: https://reviewboard.asterisk.org/r/239/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@203638 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Also change the default casing of the string contants to lowercase. This really
just saves us from have to lowercase them later when displaying them.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@203605 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r203375 | russell | 2009-06-25 16:02:18 -0500 (Thu, 25 Jun 2009) | 9 lines
Fix a case where CDR answer time could be before the start time involving parking.
(closes issue #13794)
Reported by: davidw
Patches:
13794.patch uploaded by murf (license 17)
13794.patch.160 uploaded by murf (license 17)
Tested by: murf, dbrooks
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@203376 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This merge splits the PRI/BRI signaling logic out of chan_dahdi.c into
sig_pri.c. Functionality in theory should not change (mostly). A few trivial
changes were made in sig_analog with verbose messages and commenting.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@203304 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Moved SETCADENCE ioctl call to before call into new analog signal module
to insure that it gets set.
(closes issue #15381)
Reported by: alecdavis
Patches:
fix15381.diff uploaded by dbailey (license 819)
Tested by: dbailey
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@203126 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r203115 | russell | 2009-06-25 11:02:16 -0500 (Thu, 25 Jun 2009) | 11 lines
Resolve a crash related to a T.38 reinvite race condition.
This change resolves a crash observed locally during some T.38 testing.
A call was set up using a call file, and when the T.38 reinvite came in,
the channel state was still AST_STATE_DOWN. The reason is explained by
a comment in the code that previously lived in the handling of
AST_STATE_RINGING. This change modifies the logic to handle the same
race condition for any channel state that is not UP.
(closes ABE-1895)
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@203116 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r203036 | rmudgett | 2009-06-24 16:01:43 -0500 (Wed, 24 Jun 2009) | 8 lines
Improved chan_dahdi.conf pritimer error checking.
Valid format is: pritimer=timer_name,timer_value
* Fixed segfault if the ',' is missing.
* Completely check the range returned by pri_timer2idx() to prevent
possible access outside array bounds.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@203037 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Also change the preferred configuration option from 'hostname' (which was
misleading because it didn't actually treat the value as a hostname) to
'connection' and added some verbage explaining that the user would need to
refer to their freetds.conf file for those settings. 'hostname' was kept
as a backwards compatible configuration parameter.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@202887 65c4cc65-6c06-0410-ace0-fbb531ad65f3
If the outgoing_colp parameter is set to not send COLP information, then
it does not make sense to send redirecting or transfer messages announcing
new COLP information that is blocked. The service provider may supply the
listed number for that line when it passes the messages to the next hop.
Why tell the switch that these events happened when the information is
otherwise suppressed?
Also blocked the number of previous redirects that may have occurred to
calls going out the port when outgoing_colp is 2.
Follow on to JIRA ABE-1853.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@202755 65c4cc65-6c06-0410-ace0-fbb531ad65f3