Several changes in PTLib have occurred requiring build time detection. Changes
accounted for include the library name change, config option change, install
location change, and a boolean type change which is handled by ast_ptlib.h.
Also, the sed check has been modified to properly work with autoconf >= 2.62.
(closes issue #14224)
Reported by: bergolth
Patches:
asterisk-autoconf-sed.patch uploaded by bergolth (license 661)
asterisk-pwlib-v3.patch uploaded by bergolth (license 661)
Tested by: jpeeler
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@177162 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The previous implementation of T38 faxdetect resulted in both sides of the
call jumping to a fax extension when both sides had 't38pt_udptl=yes' and
'faxdetect=yes' in sip.conf and a 'fax' extension in the current context.
This revision will jump to a 'fax' extension on incoming calls only.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@176869 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This is required to create a UDPTL structure in create_addr_from_peer() to handle the
scenario where 't38pt_udptl=yes' is not defined in the [general] section of sip.conf but
is defined the peer's context. I tested this patch by enabling t38pt_udptl in the
[general] section on one system and only enabling t38pt_udptl in a peer's context on
the system sending a fax. Without the patch, the sending system will fail to initiate
T38 negotiation with the warning message, "No way to add SDP without an UDPTL structure".
When this patch is applied the sending side will successfully initiate T38 negotiation.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@176705 65c4cc65-6c06-0410-ace0-fbb531ad65f3
masq, so that the group count lingers past the bridge.
(closes issue #14275)
Reported by: kowalma
Patches:
20090216__bug14275.diff.txt uploaded by Corydon76 (license 14)
Tested by: kowalma
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@176642 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch includes a number of changes to the indications API. The primary
motivation for this work was to improve stability. The object management
in this API was significantly flawed, and a number of trivial situations could
cause crashes.
The changes included are:
1) Remove the module res_indications. This included the critical functionality
that actually loaded the indications configuration. I have seen many people
have Asterisk problems because they accidentally did not have an
indications.conf present and loaded. Now, this code is in the core,
and Asterisk will fail to start without indications configuration.
There was one part of res_indications, the dialplan applications, which did
belong in a module, and have been moved to a new module, app_playtones.
2) Object management has been significantly changed. Tone zones are now
managed using astobj2, and it is no longer possible to crash Asterisk by
issuing a reload that destroys tone zones while they are in use.
3) The API documentation has been filled out.
4) The API has been updated to follow our naming conventions.
5) Various bits of code throughout the tree have been updated to account
for the API update.
6) Configuration parsing has been mostly re-written.
7) "Code cleanup"
The code is from svn/asterisk/team/russell/indications/.
Review: http://reviewboard.digium.com/r/149/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@176627 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r176426 | tilghman | 2009-02-16 18:49:22 -0600 (Mon, 16 Feb 2009) | 10 lines
After a 'sip reload', qualifies for realtime peers weren't immediately
restarted, instead waiting until the next registration. We're now
caching the qualify across a reload/restart and starting the qualify
immediately upon loading the peer.
(closes issue #14196)
Reported by: pdf
Patches:
20090120__bug14196_1.4.diff.txt uploaded by pdf (license 663)
Tested by: pdf
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@176459 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r176354 | dvossel | 2009-02-16 17:30:52 -0600 (Mon, 16 Feb 2009) | 8 lines
Fixes issue with AST_CONTROL_SRCUPDATE not being relayed correctly during bridging
This should have been committed with rev176247, but I missed it. srcupdate frames no longer break out of the native bridge, but are not being sent to the other call leg either. This fixs that.
issue #13749
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@176355 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
........
r175597 | dvossel | 2009-02-13 14:11:55 -0600 (Fri, 13 Feb 2009) | 4 lines
Fixed iax2 key rotation backwards compatibility
Turns key rotation back on by default. Added bit into encryption IE to indicate whether or not key rotation is supported or not. If it is not supported then it is not enabled, which insures backwards compatibility. This eliminates the need for the keyrotate option in iax.conf, so it has been removed.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@176248 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r176029 | file | 2009-02-16 11:33:53 -0400 (Mon, 16 Feb 2009) | 9 lines
Don't have the Via header stored as a stringfield as it can change often during the lifetime of a dialog.
This issue crept up with subscriptions on the AA50. When an outgoing NOTIFY is sent a new branch value
is created and the Via header is changed to reflect it. Since this was a stringfield a new spot in the
pool was used for the value while the old was left untouched/unused. If the current pool was full a new
pool was created. This would cause memory usage to increase steadily.
(issue #AA50-2332)
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@176030 65c4cc65-6c06-0410-ace0-fbb531ad65f3
1) It had numerous coding guidelines violations with regards to formatting.
2) It allocated memory using ast_calloc() that was never freed.
3) It didn't check for failure from the allocation.
4) It used sprintf() and strcat() to build the result, doing zero checking to
prevent writing past the end of the provided buffer.
The function also lacks API documentation, but that has not been addressed in
this commit.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@175829 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Turns key rotation back on by default. Added bit into encryption IE to indicate whether or not key rotation is supported or not. If it is not supported then it is not enabled, which insures backwards compatibility. This eliminates the need for the keyrotate option in iax.conf, so it has been removed.
Review: http://reviewboard.digium.com/r/159/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@175597 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch adds passthrough, file recording and file playback support for the codecs listed above, with negotiation over SIP/SDP supported. Due to Asterisk's current limitation of treating a codec/bitrate combination as a unique codec, only G.722.1 at 32 kbps and G.722.1C at 48 kbps are supported.
Along the way, some related work was done:
1) The rtpPayloadType structure definition, used as a return result for an API call in rtp.h, was moved from rtp.c to rtp.h so that the API call was actually usable. The only previous used of the API all was chan_h323.c, which had a duplicate of the structure definition instead of doing it the right way.
2) The hardcoded SDP sample rates for various codecs in chan_sip.c were removed, in favor of storing these sample rates in rtp.c along with the codec definitions there. A new API call was added to allow retrieval of the sample rate for a given codec.
3) Some basic 'a=fmtp' parsing for SDP was added to chan_sip, because chan_sip *must* decline any media streams offered for these codecs that are not at the bitrates that we support (otherwise Bad Things (TM) would result).
Review: http://reviewboard.digium.com/r/158/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@175508 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When the 'faxdetect' configuration option is used, one may also want to use
the 'faxbuffers' configuration option in chan_dahdi.conf. This option will
dynamically use the configured 'faxbuffers' buffer policy on a channel for
the life of the call following the detection of fax tones. The faxbuffers
buffer policy will be reverted during call teardown.
An example use of 'faxbuffers' is below. This example would switch to using
6 buffers with a full buffer policy.
faxbuffers=>6,full
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@175411 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch adds forceencryption=yes as an iax.conf option. When force encryption is enabled, no unencrypted connections are allowed. This insures all connections are encrypted. This is a new feature, so CHANGES and iax.conf.sample are updated as well.
(closes issue #13285)
Reported by: sgofferj
Tested by: russell
Review: http://reviewboard.digium.com/r/150/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@175344 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Key rotation breaks compatibility between (trunk/1.6.1) and (1.2/1.4/1.6.0). As a follow up to this, I am investigating possible ways to allow key rotation to be on by default and not affect the other branches, but for now it must be turned off.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@175127 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r175029 | phsultan | 2009-02-12 11:16:21 +0100 (Thu, 12 Feb 2009) | 12 lines
Set the initiator attribute to lowercase in our replies when receiving calls.
This attribute contains a JID that identifies the initiator of the GoogleTalk
voice session. The GoogleTalk client discards Asterisk's replies if the
initiator attribute contains uppercase characters.
(closes issue #13984)
Reported by: jcovert
Patches:
chan_gtalk.2.patch uploaded by jcovert (license 551)
Tested by: jcovert
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@175058 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r174282 | mmichelson | 2009-02-09 11:11:05 -0600 (Mon, 09 Feb 2009) | 12 lines
Don't do an SRV lookup if a port is specified
RFC 3263 says to do A record lookups on a hostname
if a port has been specified, so that's what we're
going to do. See section 4.2.
(closes issue #14419)
Reported by: klaus3000
Patches:
patch_chan_sip_nosrvifport_1.4.23.txt uploaded by klaus3000 (license 65)
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@174301 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r174082 | dhubbard | 2009-02-06 17:36:03 -0600 (Fri, 06 Feb 2009) | 5 lines
check ast_strlen_zero() before calling ast_strdupa() in sip_uri_headers_cmp()
and sip_uri_params_cmp()
The reporter didn't actually upload a properly-formed patch, instead a
modified chan_sip.c file was uploaded. I created a patch to determine the
changes, then modified the suggested changes to create a proper fix. The
summary above is a complete description of the changes.
(closes issue #13547)
Reported by: tecnoxarxa
Patches:
chan_sip.c.gz uploaded by tecnoxarxa (license 258)
Tested by: tecnoxarxa
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@174084 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This is very similar to the DAHDI immediate=yes option. When the phone is picked up, instead of giving a dialtone it connects directly to the "s" extension. Changes where implemented in chan_iax2.c to directly connect to the "s" extension in the appropriate context when this option is enabled. Examples explaining its use are added to iax2.conf.sample. CHANGES has been updated as well.
(closes issue #14266)
Reported by: jcovert
Patches:
chan_iax2.c.patch-trunk uploaded by jcovert (license 551)
iax.conf.sample.patch uploaded by jcovert (license 551)
Tested by: jcovert, dvossel
Review: http://reviewboard.digium.com/r/143/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@174046 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r173967 | file | 2009-02-06 13:14:15 -0400 (Fri, 06 Feb 2009) | 4 lines
Some clients do not put the call-id for replaces at the beginning, so support it being anywhere in the string.
(closes issue #14350)
Reported by: fhackenberger
........
r173968 | file | 2009-02-06 13:15:01 -0400 (Fri, 06 Feb 2009) | 2 lines
Remove a debug message I put in by accident.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@173974 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This commit expands the Asterisk scheduler API to include a common implementation
of a scheduler context being processed by a dedicated thread. chan_iax2 has been
updated to use this new code. Also, as a result, this resolves some race
conditions related to the previous chan_iax2 scheduler handling.
Related to rev 171452 which resolved the same issues in 1.4.
Code from team/russell/sched_thread2
Review: http://reviewboard.digium.com/r/129/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@173858 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Fixes issue with IAX2 transfers not taking place. As it was, a call that was being transfered would never be handed off correctly to the call ends because of how call numbers were stored in a hash table. The hash table, "iax_peercallno_pvt", storing all the current call numbers did not take into account the complications associated with transferring a call, so a separate hash table was required. This second hash table "iax_transfercallno_pvt" handles calls being transfered, once the call transfer is complete the call is removed from the transfer hash table and added to the peer hash table resuming normal operations. Addition functions were created to handle storing, removing, and comparing items in the iax_transfercallno_pvt table. The changes reverted in 116884 caused backwards compatibility issues involving iax2 transfer with 1.6.0, 1.4, and 1.2.
(closes issue #13468)
Reported by: nicox
Tested by: dvossel
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@173502 65c4cc65-6c06-0410-ace0-fbb531ad65f3
supporting devices. The devices (snoms, specifically) need to receive a SIP
URI instead of just an extension. This adds that functionality.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@172778 65c4cc65-6c06-0410-ace0-fbb531ad65f3
* Added doxygen comments to the major dahdi structures.
* Fixed PRI and SS7 using an incorrect string value if the extension
delimiter is not present in the Dial() function.
* Fixed SS7 not checking if the dialed extension is at least as long
as the stripmsd option.
* Fixed PRI not handling unknown TON/NPI prefix letters correctly.
* Fixed some uninitialized string variables on FXS ports.
configs/chan_dahdi.conf.sample
* Updated some documentation.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@172400 65c4cc65-6c06-0410-ace0-fbb531ad65f3