last match, and possibly skip empty fields. The function is useful
(and used here) when a form submits multiple 'Action' fields to the
Manager.
This change slightly modifies the current behaviour, but only in the
case the user supplies multiple 'Action: ' lines and the first
ones are empty, so the change is totally harmless.
+ Fix style on a couple of "if (displayconnects)" statements;
+ Expand a bit the 'Manager Test' interface, to make it slightly
more user friendly. But also comment that the HTML should not
be embedded in the C source.
None of this stuff needs to be applied to 1.4.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@117297 65c4cc65-6c06-0410-ace0-fbb531ad65f3
of platform/compiler-dependent warnings when handing
struct timeval fields, both reading and printing them.
It is a lost battle to handle the different ways struct timeval
is handled on the various platforms and compilers, so try
to be pragmatic and go through int/long which are universally
supported.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@116557 65c4cc65-6c06-0410-ace0-fbb531ad65f3
marked "urgent" are considered to be higher priority than other messages
and so they will be played before any other messages in a user's mailbox.
There are two ways to leave an urgent message.
1. send the 'U' option to VoiceMail().
2. Set review=yes in voicemail.conf. This will give instructions for
a caller to mark a message as urgent after the message has been recorded.
I have tested that this works correctly with file and ODBC storage, and James
Rothenberger (who wrote initial support for this feature) has tested its use
with IMAP storage.
(closes issue #11817)
Reported by: jaroth
Based on branch http://svn.digium.com/svn/asterisk/team/jrothenberger/asterisk-urgent
Tested by: putnopvut, jaroth
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@115588 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r114591 | russell | 2008-04-23 12:55:31 -0500 (Wed, 23 Apr 2008) | 5 lines
Store the manager session ID explicitly as 4 byte ID instead of a ulong. The
mansession_id cookie is coded to be limited to 8 characters of hex, and this
could break logins from 64-bit machines in some cases.
(inspired by AST-20)
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@114592 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r112468 | mmichelson | 2008-04-02 12:36:04 -0500 (Wed, 02 Apr 2008) | 13 lines
Fix a race condition in the manager. It is possible that a new manager event
could be appended during a brief time when the manager is not waiting for input.
If an event comes during this period, we need to set an indicator that there is an
event pending so that the manager doesn't attempt to wait forever for an event that
already happened.
(closes issue #12354)
Reported by: bamby
Patches:
manager_race_condition.diff uploaded by bamby (license 430)
(comments added by me)
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@112469 65c4cc65-6c06-0410-ace0-fbb531ad65f3
change, it was possible to start Asterisk with the manager interface enabled, then
either comment out the enabled option or make manager.conf unopenable and the manager
interface would still be enabled.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@110831 65c4cc65-6c06-0410-ace0-fbb531ad65f3
actual problems, per se. I also added format attributes to any printf wrapper functions I found that didn't have them. -Wsecurity and -Wmissing-format-attribute added to --enable-dev-mode.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@109447 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Though this overflow is exploitable remotely, we are NOT issuing a security
advisory for this since in order to exploit the overflow, the attacker would
have to establish an authenticated manager session AND have the system privilege.
By gaining this privilege, the attacker already has more powerful weapons at his
disposal than overflowing a buffer with a malformed manager header, so the vulnerability
in this case really lies with the authentication method that allowed the attacker to
gain the system privilege in the first place.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@108529 65c4cc65-6c06-0410-ace0-fbb531ad65f3
an attended transfer over AMI
(closes issue #10585)
Reported by: ornati
Patches:
atxfer-trunk-r90428.diff uploaded by ornati (license 210)
(with modifications from me)
Tested by: putnopvut
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@106236 65c4cc65-6c06-0410-ace0-fbb531ad65f3
automatically generated file like it used to be. This still needs to be there
for modules that have to check it to compile against multiple asterisk versions.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@104244 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Added ability to retrieve list of categories in a config file.
Added ability to retrieve the content of a particular category.
Added ability to empty a context.
Created new action to create a new file.
Updated delete action to allow deletion by line number with respect to category.
Added new action insert to add new variable to category at specified line.
Updated action newcat to allow new category to be inserted in file above another existing category.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@103331 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This set of changes introduces TCP and TLS support for chan_sip. There are various
new options in configs/sip.conf.sample that are used to enable these features. Also,
there is a document, doc/siptls.txt that describes some things in more detail.
This code was implemented by Brett Bryant and James Golovich. It was reviewed
by Joshua Colp and myself. A number of other people participated in the testing
of this code, but since it was done outside of the bug tracker, I do not have their
names. If you were one of them, thanks a lot for the help!
(closes issue #4903, but with completely different code that what exists there.)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@99085 65c4cc65-6c06-0410-ace0-fbb531ad65f3
1) Add the Dialplan class, for NewExten and VarSet events, which should cut
down on the volume of traffic in the Call class.
2) Permit some commands to be run from multiple classes, such as allowing
DBGet to be run from either the System or the Reporting class.
3) Heavily document each class in the sample config, as there were several
that made no sense to be in the write= line, and two that made no sense to be
in the read= line (since they controlled no permissions there).
(Closes issue #10386)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@97651 65c4cc65-6c06-0410-ace0-fbb531ad65f3
revision changed, every module that used the version was getting rebuilt after
every svn update. This severly annoyed me pretty quickly, so I have improved
the situation.
Now, instead of generating version.h, main/version.c is generated. version.c
includes the version information, as well as a couple of API calls for modules
to retrieve the version. So now, only version.c will get rebuilt, and the main
asterisk binary relinked, which is must faster than rebuilding http.c, manager.c,
asterisk.c, relinking the asterisk binary, chan_sip.c, func_version.c, res_agi ...
The only minor change in behavior here is that the version information reported by
chan_sip, for example, is the version of the Asterisk core, and not necessarily the
Asterisk version that the chan_sip module came from.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@96717 65c4cc65-6c06-0410-ace0-fbb531ad65f3
you need to reload after changes. Thanks YS.
Reported by: ys
Patches:
trunk93163_manager_reload.c.diff uploaded by ys (license 281)
(related to issue #11414)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@93166 65c4cc65-6c06-0410-ace0-fbb531ad65f3
manager realtime implementation.
If you change accounts in manager.conf, you now need to reload to activate the
changes (deletions, additions). This was not the case with 1.4.
Reported by: ys
Patches:
trunk93163_manager_reload.c.diff uploaded by ys (license 281)
(closes issue #11414)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@93165 65c4cc65-6c06-0410-ace0-fbb531ad65f3
equivalent to the check done by ast_verb, I wrote a macro, VERBOSITY_LEVEL, which does this
check. I did a quick look in the source and used this macro in some places where option_verbose
was used.
I also converted some verbose messages in logger.c to use ast_verb instead of ast_verbose.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@93042 65c4cc65-6c06-0410-ace0-fbb531ad65f3
- Now use Response: success
- New header "Ping: pong" :-)
- The Events action
- Now use Response: Success
- The new status is reported as "Events: On" or "Events: Off"
- Report if manager is enabled in the reload event
Small cleanups...
From moremanager
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@91420 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Thanks, eliel, for writing the original patch. Modified by me to follow
other manager events and the new "moremanager" style.
(closes issue #11478)
Reported by: eliel
Patches:
manager.c.patch uploaded by eliel (license 64)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@91347 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r90348 | russell | 2007-11-30 13:26:04 -0600 (Fri, 30 Nov 2007) | 8 lines
Change the behavior of ao2_link(). Previously, in inherited a reference.
Now, it automatically increases the reference count to reflect the reference
that is now held by the container.
This was done to be more consistent with ao2_unlink(), which automatically
releases the reference held by the container. It also makes it so it is
no longer possible for a pointer to be invalid after ao2_link() returns.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@90351 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r89536 | tilghman | 2007-11-23 11:18:26 -0600 (Fri, 23 Nov 2007) | 10 lines
Up until this point, the XML output of the manager has been technically
invalid, due to the repetition of certain parameters in a single event.
This caused various issues for XML parsers, some of which refused to parse
at all, given the invalidity of the rendered XML. So this commit fixes
the XML output, ensuring that each entity parameter has a unique name, thus
ensuring valid XML.
Reported by: msetim
Patch by: tilghman
(Closes issue #10220)
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@89537 65c4cc65-6c06-0410-ace0-fbb531ad65f3
build times - tested, there is no measureable difference before and
after this commit.
In this change:
use asterisk/compat.h to include a small set of system headers:
inttypes.h, unistd.h, stddef.h, stddint.h, sys/types.h, stdarg.h,
stdlib.h, alloca.h, stdio.h
Where available, the inclusion is conditional on HAVE_FOO_H as determined
by autoconf.
Normally, source files should not include any of the above system headers,
and instead use either "asterisk.h" or "asterisk/compat.h" which does it
better.
For the time being I have left alone second-level directories
(main/db1-ast, etc.).
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@89333 65c4cc65-6c06-0410-ace0-fbb531ad65f3
through ast_mutex primitives.
To detect all occurrences, I have renamed the lock field in struct ast_channel
so it is clear that it shouldn't be used directly.
There are some uses in res/res_features.c (see details of the diff)
that are error prone as they try and lock two channels without
caring about the order (or without explaining why it is safe).
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@89293 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This prevents modifying the strings in the stored variables,
and catched a few instances where this was actually done.
Given the differences between trunk and 1.4 (and the fact that this
is effectively an API change) it is better to fix 1.4 independently.
These are
chan_sip.c::sip_register()
chan_skinny.c:: near line 2847
config.c:: near line 1774
logger.c::make_components()
res_adsi.c:: near line 1049
I may have missed some instances for modules that do not build here.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@89268 65c4cc65-6c06-0410-ace0-fbb531ad65f3
- the *_CURRENT macros no longer need the list head pointer argument
- add AST_LIST_MOVE_CURRENT to encapsulate the remove/add operation when moving entries between lists
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@89106 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r82867 | russell | 2007-09-18 15:56:43 -0500 (Tue, 18 Sep 2007) | 10 lines
Fix a memory leak that can occur on systems under higher load. The issue is
that when events are appended to the master event queue, they use the number
of active sessions as a use count so it will know when all active sessions
at the time the event happened have consumed it. However, the handling of
the number of sessions was not properly synchronized, so the use count was
not always correct, causing an event to disappear early, or get stuck in
the event queue for forever.
(closes issue #9238, reported by bweschke, patch from Ivan, modified by me)
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@82868 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Reported by: junky
Patches:
count_showconn.diff uploaded by junky (license 177)
Provide a count of connected users to manager.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@82232 65c4cc65-6c06-0410-ace0-fbb531ad65f3
inside of a function. (Yes, it would!) Replace it with a note that explains
why it can't be done using the way that the AST_THREADSTORAGE macro is
currently defined.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@77790 65c4cc65-6c06-0410-ace0-fbb531ad65f3
for extracting application, function, manager, and agi documentation is the wrong
one to take. The most severe problem is that the output depends on which modules
are loaded as well as compile time options, which both determine which parts are
available.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@72986 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Handle transferring large files from the built-in http server. Previously, the
code attempted to malloc a block as large as the file itself. Now it uses the
sendfile() system call so that the file isn't copied into userspace at all if
it is available. Otherwise, it just uses a read/write of small chunks at a time.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@72701 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Also adds a new "reporting" permission for manager, since it can be incredibly spammy.
This permission was discussed on the -dev mailing list some months back.
Issue 8613, patch by johann8384, with some minor changes by me.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@70961 65c4cc65-6c06-0410-ace0-fbb531ad65f3
places in the code where the same block of code for creating detached threads
was replicated. (patch from bbryant)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@65968 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r63982 | qwell | 2007-05-11 15:16:17 -0500 (Fri, 11 May 2007) | 7 lines
Hide manager password from "manager show user foo".
I realize that there are other ways to get this,
but we really don't need to just show it in plain text so easily.
Issue 9273, patch by junky
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@63983 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r63886 | russell | 2007-05-11 11:05:43 -0500 (Fri, 11 May 2007) | 6 lines
When MD5 authentication is not possible because there is no challenge present,
either because the Challenge action was never issued, or some other reason,
give a proper error message and return an error instead of claiming that the
user wasn't found.
(reported by jsmith on IRC)
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@63902 65c4cc65-6c06-0410-ace0-fbb531ad65f3
- Add missing option to options.h
- Add missing variables to asterisk.h
- Move manager version to manager.h include file
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@63030 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r60603 | russell | 2007-04-06 15:58:43 -0500 (Fri, 06 Apr 2007) | 13 lines
To be able to achieve the things that we would like to achieve with the
Asterisk GUI project, we need a fully functional HTTP interface with access
to the Asterisk manager interface. One of the things that was intended to be
a part of this system, but was never actually implemented, was the ability for
the GUI to be able to upload files to Asterisk. So, this commit adds this in
the most minimally invasive way that we could come up with.
A lot of work on minimime was done by Steve Murphy. He fixed a lot of bugs in
the parser, and updated it to be thread-safe. The ability to check
permissions of active manager sessions was added by Dwayne Hubbard. Then,
hacking this all together and do doing the modifications necessary to the HTTP
interface was done by me.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@60604 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
................
r60137 | russell | 2007-04-04 12:40:10 -0500 (Wed, 04 Apr 2007) | 14 lines
Merged revisions 60134 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.2
........
r60134 | russell | 2007-04-04 12:38:47 -0500 (Wed, 04 Apr 2007) | 6 lines
It is valid to redirect channels via the manager interface that are not in the
UP state. Instead of checking for that to prevent to ensure a dead channel
doesn't get redirected, just use the ast_check_hangup() API call.
(issue #9457, reported by Callmewind, patch by me)
(related to issue #8977)
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@60141 65c4cc65-6c06-0410-ace0-fbb531ad65f3
performance of the GUI. This encodes the configuration into the JSON format
in a manager header, "JSON: ". The encoded information can be directly used
as a javascript object, so no parsing is needed. For large configuration
files, this can greatly improve loading times in the GUI. Furthermore, the
encoding takes up a lot less space when being transmitted than the other
alternatives. (Inspired by discussion with Pari)
Here is an example of what you get:
http://localhost:8088/asterisk/rawman?action=getconfigjson&filename=users.conf
Response: Success
JSON: {"general":["hasvoicemail=yes"],"6000":["fullname=russell","secret=1234"]}
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@56323 65c4cc65-6c06-0410-ace0-fbb531ad65f3
- changing the actionlock to a rwlock
- not locking the session before doing the action callback
The crash issue in 8711 should not be an issue here.
Merged revisions 52611 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r52611 | russell | 2007-01-29 14:39:20 -0600 (Mon, 29 Jan 2007) | 10 lines
The session lock can not be held while calling action callbacks. If so, then
when the WaitEvent callback gets called, then no event can happen because the
session can't be locked by another thread. Also, the session needs to be
locked in the HTTP callback when it reads out the output string. This fixes
the deadlock reported in both 8711 and 8934.
Regarding issue 8711, there still may be an issue. If there is a second action
requested before the processing of the first action is finished, there could
still be some corruption of the output string buffer used to build the result.
(issue #8711, #8934)
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@52613 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r51781 | russell | 2007-01-23 16:04:01 -0600 (Tue, 23 Jan 2007) | 6 lines
Fix some bugs in process_message(). The manager session lock needs to be held
when sending some sort of response, or calling one of the manager action
callbacks. This resolves an issue where people using the GUI would get random
crashes when they start clicking around a lot.
(issue #8711, reported and debugged by zandbelt)
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@51787 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r51750 | russell | 2007-01-23 15:33:15 -0600 (Tue, 23 Jan 2007) | 4 lines
When traversing the list of manager actions, the iterator needs to be
initialized to the list head *after* locking the list. Also, lock the actions
list in one place it is being accessed where it was not being done.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@51751 65c4cc65-6c06-0410-ace0-fbb531ad65f3
has been found so that 'cat' is non-NULL. This way, users.conf is only checked
when necessary. (issue #8852, akohlsmith, committed patch a bit different)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@51296 65c4cc65-6c06-0410-ace0-fbb531ad65f3
On passing remove presumably duplicate code to generate
the message for the manager_hooks:
in the previous version, the message was almost the same as the one sent
to regular sessions, with the exception of the empty line at the end, and
a few (presumably unintentional) differences e.g. timestamps,
debugging, and lowercase headers for "event" and "privilege".
now we reuse the same message as before.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@48553 65c4cc65-6c06-0410-ace0-fbb531ad65f3
renaming them to ast_str ... and putting the
struct ast_threadstorage pointer into the struct ast_str.
This makes the code a lot more readable.
At this point we can use these routines also to
replace ast_build_string().
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@48510 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Not long ago i replaced lseek() with fseek() but
forgot that filr FILE's you need ftell to
give you the current position.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@48501 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Long explaination:
The behaviour of the underlying malloc(0) differs depending on the
operating system. Some return NULL (SysV behaviour); some still
allocate a small chunk of memory and return a valid pointer (e.g.
traditional BSD); some (e.g. FreeBSD 6.x) return a non-null pointer
that causes a memory fault if used, even just for reading.
Given the above variety, better never call malloc(0).
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@48389 65c4cc65-6c06-0410-ace0-fbb531ad65f3
are passed as an argument.
- Update the code in main/http.c to use the new interface
(the diff is large but mostly mechanical, due to the name change of
several variables);
- And since now it is trivial, implement "AMI over TLS", and document
the possible options in manager.conf
- And since the test client (openssl s_client -connect host:port )
does not generate \r\n as a line terminator, make get_input()
also accept just a \n as a line terminator (Mac users: do you
also need the \r-only version ?)
The option parsing in manager.conf is not very efficient, and needs
to be cleaned up and made similar to what we have in http.conf
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@48351 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
................
r47986 | oej | 2006-11-24 07:00:19 -0700 (Fri, 24 Nov 2006) | 6 lines
Doxygen update
- Document cause codes
- Document a bit more on channel variables - global, predefined and local
- Fix some doxygen in channel.h. Adding one comment for two definitions does not
work. They won't be copied to each.
................
r47995 | murf | 2006-11-24 10:40:49 -0700 (Fri, 24 Nov 2006) | 1 line
This fix inspired by a patch supplied in bug 8189, which points out problems with the PLC code
................
r47997 | murf | 2006-11-24 11:17:25 -0700 (Fri, 24 Nov 2006) | 1 line
removed the svnmerge-integrated property from trunk; it's confusing svnmerge in newly created branches
................
r48001 | rizzo | 2006-11-25 02:02:42 -0700 (Sat, 25 Nov 2006) | 5 lines
set pointers to NULL after freeing memory to avoid multiple free()
probably 1.4/1.2 issue as well if someone can look into that.
................
r48003 | oej | 2006-11-25 02:45:57 -0700 (Sat, 25 Nov 2006) | 9 lines
- Adding comment on suspicious memory allocation. Seems like it's never freed, but I don't
have a clear understanding of the frame allocation/deallocation, so I just mark this
for investigation. (Reported by Ed Guy). We're trying to see if a free() hurts...
- Doxygen comments on p2p rtp bridge stuff. I am a bit worried about shortcutting
rtcp this way, but will need feedback from rtcp gurus. This should work for
video calls too, and possibly UDPTL.
................
r48004 | oej | 2006-11-25 02:48:30 -0700 (Sat, 25 Nov 2006) | 2 lines
Changing ERROR to lesser level. Imported from 1.2/1.4
................
r48008 | rizzo | 2006-11-25 10:37:04 -0700 (Sat, 25 Nov 2006) | 7 lines
generalize a bit the functions used to create an tcp socket
and then run a service on it.
The code in manager.c does essentially the same things,
so we will be able to reuse the code in here (probably
moving it to netsock.c or another appropriate library file).
................
r48009 | mattf | 2006-11-25 13:30:04 -0700 (Sat, 25 Nov 2006) | 1 line
Updates to show linkset command
................
r48010 | mattf | 2006-11-25 13:54:38 -0700 (Sat, 25 Nov 2006) | 2 lines
Add ss7 show linkset command
................
r48011 | mattf | 2006-11-25 14:32:33 -0700 (Sat, 25 Nov 2006) | 1 line
Make sure we don't send a group reset on a group larger than 32 CICs
................
r48012 | mattf | 2006-11-25 14:35:23 -0700 (Sat, 25 Nov 2006) | 1 line
bug fix
................
r48013 | mattf | 2006-11-25 14:46:58 -0700 (Sat, 25 Nov 2006) | 1 line
Make compiler happier
................
r48014 | mattf | 2006-11-25 14:50:42 -0700 (Sat, 25 Nov 2006) | 1 line
Little fix so we use the right message
................
r48016 | murf | 2006-11-25 17:15:42 -0700 (Sat, 25 Nov 2006) | 9 lines
Merged revisions 48015 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r48015 | murf | 2006-11-25 17:01:34 -0700 (Sat, 25 Nov 2006) | 1 line
A little bit of func_cdr documentation upgrade-- no bug# involved, although 8221 may have inspired it.
........
................
r48018 | murf | 2006-11-25 17:31:13 -0700 (Sat, 25 Nov 2006) | 9 lines
Merged revisions 48017 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r48017 | murf | 2006-11-25 17:26:16 -0700 (Sat, 25 Nov 2006) | 1 line
might as well also document the raw values of the flag vars
........
................
r48019 | russell | 2006-11-25 23:55:33 -0700 (Sat, 25 Nov 2006) | 6 lines
- Add some comments on thread storage with a brief explanation of what it is
as well as what the motivation is for using it.
- Add a comment by the declaration of ast_inet_ntoa() noting that this function
is not reentrant, and the result of a previous call to the function is no
longer valid after calling it again.
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@48350 65c4cc65-6c06-0410-ace0-fbb531ad65f3
the infrastructure exposed in http.c earlier today.
As a bonus, now we can restart the session on a different
port just reloading the module.
On passing, fix a bug in the handling of 'enabled' in the configuration
file - previously, a missing "enabled=" line in manager.conf meant
"whatever the state was before" instead of a specific value.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@48338 65c4cc65-6c06-0410-ace0-fbb531ad65f3
as described in
http://lists.digium.com/pipermail/asterisk-dev/2006-December/025213.html
In detail, this commit does the following:
b) change the function get_input() to use fread() instead of read()
to collect the data. One can still do the ast_wait_for_input() on
the original descriptor returned by accept().
c) change the function send_string() to work on the FILE *.
As a side effect, this change now really guarantees that
we don't spend more than "writetimeout" milliseconds on
each line sent.
d) modify the function action_command() so that it creates a
temporary file descriptor to be passed to ast_cli_command(),
and then read back the data from the temp file and write it
to the output with send_string(). The code is similar to
what is done in generic_http_callback() to support AMI-over-HTTP.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@48332 65c4cc65-6c06-0410-ace0-fbb531ad65f3
an extra allocation on a path where we have way too many already.
Unfortunately the AMI-over-HTTP requires multiple copies,
because we need to generate a header, then the raw output to
an intermediate buffer, then convert it to html/xml, and
finally copy everything into a malloc'ed buffer because
that's what the generic_http_callback interface expects.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@48090 65c4cc65-6c06-0410-ace0-fbb531ad65f3
to simplify the body of the main loop of the accepting thread.
Rename purge_unused() to purge_events() so one knows what the
function does.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@48081 65c4cc65-6c06-0410-ace0-fbb531ad65f3
+ use a wrapper around ast_carefulwrite(), used in two places,
to make life easier when we decide to use a different interface
to the socket.
+ put an ast_verbose() message on astman_append on a case that
should never happen now that we use a temporary file for
AMI-over-HTTP sessions
+ document and slightly simplify process_events() by removing
unnecessary parentheses.
+ in get_input(), use ast_wait_for_input() instead of poll().
We may want to move to a completely non-blocking
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@48080 65c4cc65-6c06-0410-ace0-fbb531ad65f3
debugging code in the manager.
At the moment the debugging code is very lightweight, if the option
is enabled manager messages also carry a sequence number and
the info where they have been generated e.g.
SequenceNumber: 10
File: chan_sip.c
Line: 11927
Func: handle_response_register
It is not worthwhile having this as a compile time option
right now, because the extra work involved at runtime is
just checking one variable.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@47132 65c4cc65-6c06-0410-ace0-fbb531ad65f3
- Check the channel name string length to be zero, not non-zero
- Check the message string length to be zero, not non-zero
- unlock the channel *after* calling sendtext
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@46661 65c4cc65-6c06-0410-ace0-fbb531ad65f3
simplifies the manager queue handling as described in
the comment, and will make a lot easier to make further
work on this code.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@46120 65c4cc65-6c06-0410-ace0-fbb531ad65f3
to minimize diffs with future modifications.
The current implementation is problematic for the following reasons:
+ all insertions are O(N) because the event list does not have a tail
pointer;
+ there is only a single lock protecting both session and users queues.
+ the implementation of the queue itself is not documented.
I think i have figured it out, more or less, but am unclear on
whether there is proper locking in place
The rewrite (which i have working locally) uses a tailq so insertions
are O(1), separate locks for the event and session queues, and has
a documented implementation so hopefully we can figure out if/where
bug exist.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@45753 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Of interest:
+ ast_get_manager_by_name_locked() is now without the ast_
prefix as it is a local function;
+ unuse_eventqent() renamed to unref_event(), and returns
the pointer to the next entry.
+ marked with XXX a couple of usages of unref_event()
because i suspect we are addressing the wrong entry.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@45648 65c4cc65-6c06-0410-ace0-fbb531ad65f3
be called for each thread specific object after they are allocated. Note that
there was already the ability to define a custom cleanup function. Also, if
the custom cleanup function is used, it *MUST* call free on the thread
specific object at the end. There is no way to have this magically done that
I can think of because the cleanup function registered with the pthread
implementation will only call the function back with a pointer to the
thread specific object, not the parent ast_threadstorage object.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@45623 65c4cc65-6c06-0410-ace0-fbb531ad65f3
+ more comments on struct mansession and global variables;
+ small improvements to the session matching code so it supports
multiple sessions from the same IP
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@45597 65c4cc65-6c06-0410-ace0-fbb531ad65f3
around so that functions belonging to the same group are
close to each other.
At the beginning of each group i have added a bit of documentation
to explain what the group does and what is the typical flow - basically,
all i have learned by code inspection over the past few days should
be documented for you to read.
I have not put many doxygen annotations just because i am not
sure what are the proper ones. Hopefully some doxygen experts will jump in.
Next on the plate: try to figure out how "struct eventqent"
are supposed to work.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@45582 65c4cc65-6c06-0410-ace0-fbb531ad65f3
On passing, fix a bug: close the socket if the allocation
of a structure for the new session fails.
(the bugfix is a candidate for 1.4)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@45561 65c4cc65-6c06-0410-ace0-fbb531ad65f3
to start manager responses that need further lines.
This removes a lot of duplicate code from the various handlers
that at the moment build an ActionID string themselves.
Once settled, the function should move to manager.h so
it can be used by other files (chan_agent, chan_iax2, chan_sip,
chan_zap, res_jabber and app_queue).
I am not totally clear if there is a preferred position for
the ActionID: line in a message. Some instances put it at
the end, but one would argue that it is preferable to have
it at the beginning.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@45551 65c4cc65-6c06-0410-ace0-fbb531ad65f3
rather than use inline code for them.
Things are more readable this way, and also error processing
is more consistent.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@45540 65c4cc65-6c06-0410-ace0-fbb531ad65f3
(they are committed a bit at a time so it is easier to
revert them in case we find a bug at a later time).
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@45529 65c4cc65-6c06-0410-ace0-fbb531ad65f3
of the file, so it can be used from more places;
+ make the declaration of contenttype[] more robust;
+ remove the wrappers around __xml_translate(), since they were
used only in one place, and rename to xml_translate().
This allows for a bit of simplifications.
+ document the output produced by the above function.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@45485 65c4cc65-6c06-0410-ace0-fbb531ad65f3
they do similar things.
Add a small form on top of the html output so request like
http://foo:8088/asterisk/manager will suggest you what to do.
Note: i suspect there is still a bug somewhere in the session matching
code, as sometimes you have to login twice in order for the following
commands to be recognised.
Apart from this, the cli now is basically usable from a web form!
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@45475 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Normal responses are sequences of lines of the form "Name: value",
with \r\n as line terminators and an empty line as a response
terminator.
Generi CLI commands, however, do not have such a clean formatting,
and the existing code failed to generate valid XML for them.
Obviously we can only use heuristics here, and we do the following:
- accept either \r or \n as a line terminator, trimming trailing whitespace;
- if a line does not have a ":" in it, assume that from this point on
we have unformatted data, and use "Opaque-data:" as a name;
- if a line does have a ":" in it, the Name field is not always
a legal identifier, so replace non-alphanum characters with underscores;
All the above is to be refined as we improve the formatting of
responses from the CLI.
And, all the above ought to go as a comment in the code rather than
just in a commit message...
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@45334 65c4cc65-6c06-0410-ace0-fbb531ad65f3
invoked through the http interface.
It is not terribly efficient but better than no output at all.
Todo: use a configurable /tmp directory instead of a hardwired one.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@45330 65c4cc65-6c06-0410-ace0-fbb531ad65f3
replace non-alphanum chars with underscore.
This is useful when building field names in xml formatting.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@45325 65c4cc65-6c06-0410-ace0-fbb531ad65f3
+ let some commands (Challenge, Login) be processed even if
already authenticated, as it doesn't harm and prevents some
incorrect error messages
+ remove custom code for Logoff - the existing handler was ok.
Some indentation fixes may be necessary
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@45219 65c4cc65-6c06-0410-ace0-fbb531ad65f3
+ remove the need for an snprintf in astman_get_header()
+ fix comment for manager list eventq
+ localize one variable and minor code simplifications.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@45185 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Mark with XXX one place (during command execution) where
navigation should be protected with actionlock, but is not
because it would block requests for a long time.
To solve this properly we need to put reference counts in
the struct manager_action.
A suboptimal fix is to copy the record on a search and then
unlock the list while we work on the copy.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@45177 65c4cc65-6c06-0410-ace0-fbb531ad65f3
simplifications. On passing, use a single exit point.
(once done with the cleanup i will merge the changes into 1.4,
if applicable)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@44626 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r44378 | kpfleming | 2006-10-04 14:47:22 -0500 (Wed, 04 Oct 2006) | 4 lines
update thread creation code a bit
reduce standard thread stack size slightly to allow the pthreads library to allocate the stack+data and not overflow a power-of-2 allocation in the kernel and waste memory/address space
add a new stack size for 'background' threads (those that don't handle PBX calls) when LOW_MEMORY is defined
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@44379 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Original patch by junky, modified by anthonyl, modified again by jcolp (with minor modifications by me)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@43300 65c4cc65-6c06-0410-ace0-fbb531ad65f3
allocation and free on every call of the function for preparing the string
that will be appended. Then, use the ast_dynamic_str() code instead of the
open coded version that is appended to when waiting for it to be delivered.
- use for loops for list traversals
- convert the manager sessions list to use list macros
- use atomic operations for num_sessions and usecounts
- convert some defines to the equivalent enum
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@40783 65c4cc65-6c06-0410-ace0-fbb531ad65f3
- restructured build tree and makefiles to eliminate recursion problems
- support for embedded modules
- support for static builds
- simpler cross-compilation support
- simpler module/loader interface (no exported symbols)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@40722 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Brett Bryant
Luigi Rizzo
Olle Johansson
Mark Michelson
Tilghman Lesher
Russell Bryant
Terry Wilson
Kevin P. Fleming
Joshua Colp
Jason Parker
Jeff Peeler
Dwayne M. Hubbard
Steve Murphy
Mark Spencer
Matt O'Gorman
Nadi Sarrar
Anthony LaMantia