........
r364365 | twilson | 2012-04-27 17:31:01 -0500 (Fri, 27 Apr 2012) | 11 lines
Fix ast_parse_arg numeric type range checking and add tests
ast_parse_arg wasn't checking for strto* parse errors or limiting
the results by the actual range of the numeric types. This patch fixes
that and adds unit tests as well.
Review: https://reviewboard.asterisk.org/r/1879/
........
Merged revisions 364340 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
r364369 | twilson | 2012-04-27 17:33:10 -0500 (Fri, 27 Apr 2012) | 2 lines
Add missing test_config.c
........
Merged revisions 364365,364369 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@364397 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When party B does an attended transfer of party A to party C, the
attending bridge between party B and C should not be running an h exten
when the bridge ends. Running an h exten now sets a softhangup flag to
ensure that an AGI will run in dead AGI mode.
* Set the AST_FLAG_BRIDGE_HANGUP_DONT on the party B channel for the
attending bridge between party B and C.
(closes issue AST-870)
(closes issue ASTERISK-19717)
Reported by: Mario
(closes issue ASTERISK-19633)
Reported by: Andrey Solovyev
Patches:
jira_asterisk_19633_v1.8.patch (license #5621) patch uploaded by rmudgett
Tested by: rmudgett, Andrey Solovyev, Mario
........
Merged revisions 364060 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 364065 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@364082 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Asterisk has a setting for the minimum allowed DTMF. If we get shorter
DTMF tones, these will be changed to the minimum on the outbound call
leg.
(closes issue ASTERISK-19772)
Review: https://reviewboard.asterisk.org/r/1882/
Reported by: oej
Tested by: oej
Patches by: oej
Thanks to the reviewers.
1.8 branch for this patch: agave-dtmf-duration-asterisk-conf-1.8
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@363558 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Found a small amount of curly brackets in my hotel room here in Denmark.
I hereby donate them to the Asterisk project.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@363480 65c4cc65-6c06-0410-ace0-fbb531ad65f3
1) B calls A with Dial option T
2) B DTMF atxfer to C
3) B hangs up
4) C does not answer
5) B is called back
6) B answers
7) B cannot initiate transfers anymore
* Add dial features datastore to recalled party B channel that is a copy
of the original party B channel's dial features datastore.
* Extracted add_features_datastore() from add_features_datastores().
* Renamed struct ast_dial_features features_caller and features_callee
members to my_features and peer_features respectively. These better names
eliminate the need for some explanatory comments.
* Simplified code accessing the struct ast_dial_features datastore.
(closes issue ASTERISK-19383)
Reported by: lgfsantos
........
Merged revisions 363428 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 363429 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@363430 65c4cc65-6c06-0410-ace0-fbb531ad65f3
As detailed in the advisory, AMI users without write authorization for SYSTEM class AMI
actions were able to run system commands by going through other AMI commands which did
not require that authorization. Specifically, GetVar and Status allowed users to do this
by setting their variable/s options to the SHELL or EVAL functions.
Also, within 1.8, 10, and trunk there was a similar flaw with the Originate action that
allowed users with originate permission to run MixMonitor and supply a shell command
in the Data argument. That flaw is fixed in those versions of this patch.
(closes issue ASTERISK-17465)
Reported By: David Woolley
Patches:
162_ami_readfunc_security_r2.diff uploaded by jrose (license 6182)
18_ami_readfunc_security_r2.diff uploaded by jrose (license 6182)
10_ami_readfunc_security_r2.diff uploaded by jrose (license 6182)
........
Merged revisions 363117 from http://svn.asterisk.org/svn/asterisk/branches/1.6.2
........
Merged revisions 363141 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 363156 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@363159 65c4cc65-6c06-0410-ace0-fbb531ad65f3
* Redo ast_app_run_sub()/ast_app_exec_sub() to use a known return point so
execution will stop after the routine returns there.
(s@gosub_virtual_context:1)
* Create ast_app_exec_macro() and ast_app_exec_sub() to run the macro and
gosub application respectively with the parameter string already created.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@362962 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Move debug message in ast_rtp_instance_early_bridge_make_compatible() to
be output when what it states has actually happened.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@362920 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The Security Events Framework API was changed while adding the generation of
security events in chan_sip. A payload type and name was missed from being
added to struct ie_maps.
(closes issue ASTERISK-19759)
Reported by: Michael L. Young
Patches:
issue-asterisk-19759.diff uploaded by Michael L. Young (license 5026)
........
Merged revisions 362918 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@362919 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The CHANNEL_DEADLOCK_AVOIDANCE() feature of preserving where the channel
lock was originally obtained is overkill where ast_channel_lock_both() was
inlined.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@362888 65c4cc65-6c06-0410-ace0-fbb531ad65f3
ISDN ETSI PTP and Q.SIG (And SS7 in future) have support for reporting who
was the original redirecting party of a call.
* Added support for the original redirecting party and reason to the
REDIRECTING function and the system core as well as to the stubbed
locations in sig_pri.c.
Review: https://reviewboard.asterisk.org/r/1829/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@362779 65c4cc65-6c06-0410-ace0-fbb531ad65f3
* chan_mobile: Fixed an overrun where the cind_state buffer (an integer array
of size 16) would be overrun due to improper bounds checking. At worst, the
buffer can be overrun by a total of 48 bytes (assuming 4-byte integers),
which would still leave it within the allocated memory of struct hfp. This
would corrupt other elements in that struct but not necessarily cause any
further issues.
* app_sms: The array imsg is of size 250, while the array (ud) that the data
is copied into is of size 160. If the size of the inbound message is
greater then 160, up to 90 bytes could be overrun in ud. This would corrupt
the user data header (array udh) adjacent to ud.
* chan_unistim: A number of invalid memmoves are corrected. These would move
data (which may or may not be valid) into the ends of these buffers.
* asterisk: ast_console_toggle_loglevel does not check that the console log
level being set is less then or equal to the allowed log levels of 32.
* format_pref: In ast_codec_pref_prepend, if any occurrence of the specified
codec is not found, the value used to index into the array pref->order
would be one greater then the maximum size of the array.
* jitterbuf: If the element being placed into the jitter buffer lands in the
last available slot in the jitter history buffer, the insertion sort attempts
to move the last entry in the buffer into one slot past the maximum length
of the buffer. Note that this occurred for both the min and max jitter
history buffers.
* tdd: If a read from fsk_serial returns a character that is greater then 32,
an attempt to read past one of the statically defined arrays containing the
values that character maps to would occur.
* localtime: struct ast_time and tm are not the same size - ast_time is larger,
although it contains the elements of tm within it in the same layout. Hence,
when using memcpy to copy the contents of tm into ast_time, the size of tm
should be used, as opposed to the size of ast_time.
* extconf: this treats ast_timing's minmask array as if it had a length of 48,
when it has defined the size of the array as 24. pbx.h defines minmask as
having a size of 48.
(issue ASTERISK-19668)
Reported by: Matt Jordan
........
Merged revisions 362485 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 362496 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@362497 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch addresses a number of modules in main that did not handle the
negative return value from function calls adequately, or were not sufficiently
clear that the conditions leading to improper handling of the return values
could not occur. This includes:
* asterisk.c: A negative return value from the read function would be used
directly as an index into a buffer. We now check for success of the read
function prior to using its result as an index.
* manager.c: Check for failures in mkstemp and lseek when handling the
temporary file created for processing data returned from a CLI command in
action_command. Also check that the result of an lseek is sanitized prior
to using it as the size of a memory map to allocate.
(issue ASTERISK-19655)
Reported by: Matt Jordan
Review: https://reviewboard.asterisk.org/r/1863/
........
Merged revisions 362359 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 362360 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@362361 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The current Security Events Framework API only supports IPv4 when it comes to
generating security events. This patch does the following:
* Changes the Security Events Framework API to support IPV6 and updates
the components that use this API.
* Eliminates an error message that was being generated since the current
implementation was treating an IPv6 socket address as if it was IPv4.
* Some copyright dates were updated on files touched by this patch.
(closes issue ASTERISK-19447)
Reported by: Michael L. Young
Tested by: Michael L. Young
Patches:
security_events_ipv6v3.diff uploaded by Michael L. Young (license 5026)
Review: https://reviewboard.asterisk.org/r/1777/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@362200 65c4cc65-6c06-0410-ace0-fbb531ad65f3
ASTERISK-18809 eliminated the legacy macro invocation of the stdexten in
favor of the Gosub method without a means of backwards compatibility.
(issue ASTERISK-18809)
(closes issue ASTERISK-19457)
Reported by: Matt Jordan
Tested by: rmudgett
Review: https://reviewboard.asterisk.org/r/1855/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@361998 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Doing Set(MESSAGE_DATA(key)=) would add an empty key header if the key
header did not already exist. If it already existed it would delete it.
* Made msg_set_var_full() exit early if the named variable did not already
exist and the value to set is empty.
........
Merged revisions 361522 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@361523 65c4cc65-6c06-0410-ace0-fbb531ad65f3
* Hangup now can take a regular expression as the Channel option. If you want
to hangup multiple channels, use /regex/ as the Channel option. Existing
behavior to hanging up a single channel is unchanged, but if you pass a regex,
the manager will send you a list of channels back that were hung up.
(closes issue ASTERISK-19575)
Reported by: Mark Murawski
Tested by: Mark Murawski
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@361038 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Prior to this patch, a connected line update was queued during
call pickup and then an answer frame was queued. The original
caller would presumably then have his connected line updated
and then the call would be answered.
In actuality, the answer frame was not how the call ended up
being answered. Rather, an odd section in app_dial that checks
if the called channel's state is up.
The result is that the order of the connected line update and
the answer were variable. In most cases, this wasn't actually
a bad thing. However, if the 'I' option was passed to dial, the
connected line update would be inhibited.
The fix is to queued the connected line after the answer frame is
queued. This way the race in app_dial is between two
conditions resulting in an answer. This way the connected line
update occurs after the answer every time.
(closes issue ASTERISK-19183)
Reported by: Thomas Arimont
Tested by: Thomas Arimont
Mark Michelson
Patches:
ASTERISK-19183.patch uploaded by Mark Michelson (license 5049)
........
Merged revisions 360884 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 360885 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@360886 65c4cc65-6c06-0410-ace0-fbb531ad65f3
* Rename astobj2 API parameter funcname to func.
* Rename astobj2 API iterator parameter to iter.
* Update some documentation for OBJ_MULTIPLE.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@360827 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Global ao2 objects must always exist after initialization because there is
no access control to obtain another reference to the global object.
It is expected that module configuration could use these new API calls to
replace an active configuration parameter object with an updated
configuration parameter object.
With these new API calls, the global object could be replaced, removed, or
referenced without the risk of someone using a stale global object
pointer.
Review: https://reviewboard.asterisk.org/r/1824/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@360627 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Rather then flood the CLI with verbose messages, we've changed the level to
debug. This will help keep the CLI clean.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@360536 65c4cc65-6c06-0410-ace0-fbb531ad65f3
........
r360356 | russell | 2012-03-23 22:33:36 -0400 (Fri, 23 Mar 2012) | 6 lines
expression parser: Fix (theoretical) memory leak.
Fix a memory leak that is very unlikely to actually happen. If a malloc()
succeeded, but the following strdup() failed, the memory from the original
malloc() would be leaked.
........
r360357 | russell | 2012-03-23 22:34:39 -0400 (Fri, 23 Mar 2012) | 6 lines
Rebuild parsers.
This is needed to include the last fix to main/ast_expr2.y. The changes look
much bigger as this regeneration of the code was done with newer versions of
flex and bison.
........
Merged revisions 360356-360357 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 360358 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@360359 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Q.951 indicates that when the presentation indicator is "Number not
available due to interworking" for a number then the screening indicator
field should be "Network provided".
* Made ast_party_id_presentation() return AST_PRES_NUMBER_NOT_AVAILABLE
when the presentation is "Number not available due to interworking". This
fix makes Asterisk consistent and it also makes it consistent with earlier
branches as far as this presentation value is concerned.
* Made pri_to_ast_presentation() and ast_to_pri_presentation() conversions
handle the "Number not available due to interworking" case better in
sig_pri.c. This change is possible because the minimum required libpri
version (v1.4.11) has the necessary defines in libpri.h.
........
Merged revisions 360309 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 360310 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@360311 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Everything still compiled after making these changes, so I assume these
whitespace-only changes didn't break anything (and shouldn't have).
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@360190 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Fix AMI module reload deadlock regression from ASTERISK-18479 when it
tried to fix the race between calling an AMI action callback and
unregistering that action. Refixes ASTERISK-13784 broken by
ASTERISK-17785 change.
Locking the ao2 object guaranteed that there were no active callbacks that
mattered when ast_manager_unregister() was called. Unfortunately, this
causes the deadlock situation. The patch stops locking the ao2 object to
allow multiple threads to invoke the callback re-entrantly. There is no
way to guarantee a module unload will not crash because of an active
callback. The code attempts to minimize the chance with the registered
flag and the maximum 5 second delay before ast_manager_unregister()
returns.
The trunk version of the patch changes the API to fix the race condition
correctly to prevent the module code from unloading from memory while an
action callback is active.
* Don't hold the lock while calling the AMI action callback.
(closes issue ASTERISK-19487)
Reported by: Philippe Lindheimer
Review: https://reviewboard.asterisk.org/r/1818/
Review: https://reviewboard.asterisk.org/r/1820/
........
Merged revisions 359979 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 359980 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@359981 65c4cc65-6c06-0410-ace0-fbb531ad65f3
* Remove unnnecessary const from const char * const var declaration in the
ast_app_run_macro() and ast_app_run_sub() prototypes. The second const is
unnecessary.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@359904 65c4cc65-6c06-0410-ace0-fbb531ad65f3
There exists a remotely exploitable stack buffer overflow in HTTP digest
authentication handling in Asterisk. The particular method in question
is only utilized by HTTP AMI. When parsing the digest information, the
length of the string is not checked when it is copied into temporary buffers
allocated on the stack.
This patch fixes this behavior by parsing out pre-defined key/value pairs
and avoiding unnecessary copies to the stack.
(closes issue ASTERISK-19542)
Reported by: Russell Bryant
Tested by: Matt Jordan
........
Merged revisions 359706 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 359707 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@359708 65c4cc65-6c06-0410-ace0-fbb531ad65f3
* Added 'b' and 'B' options to Dial. These options will allow you to run
last-minute dialplan on the caller and callee channels while the Dial
application is executing, but before the call is started. For example you
can use the 'b' option to run dialplan on the callee channel to get the name
of the newly created channel right away.
Review: https://reviewboard.asterisk.org/r/1229/
(closes issue: ASTERISK-19548)
Reported by: Mark Murawski
Tested by: Mark Murawski, Stefan Schmidt
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@359705 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When a change in time occurs, such that the timestamps associated with frames
being placed into an adaptive jitter buffer (implemented in jitterbuf.c)
are significantly different then the previously inserted frames, the jitter
buffer checks to see if it needs to be resynched to the new time frame. If
three consecutive packets break the threshold, the jitter buffer resynchs
itself to the new timestamps. This currently only occurs when history is
calculated, and hence only on JB_TYPE_VOICE frames.
JB_TYPE_CONTROL frames, on the other hand, are never passed to the history
calculations. Because of this, if the jump in time is greater then the
maximum allowed length of the jitter buffer, the JB_TYPE_CONTROL frames are
dropped and no resynchronization occurs. Alterntively, if the overfill
logic is not triggered, the JB_TYPE_CONTROL frame will be placed into the
buffer, but with a time reference that is not applicable. Subsequent
JB_TYPE_VOICE frames will quickly trigger the overflow logic until reads
from the jitter buffer reach the errant JB_TYPE_CONTROL frame.
This patch allows JB_TYPE_CONTROL frames to resynch the jitter buffer. As
JB_TYPE_CONTROL frames are unlikely to occur in multiples, it perform the
resynchronization on any JB_TYPE_CONTROL frame that breaks the resynch
threshold.
Note that this only impacts chan_iax2, as other consumers of the adaptive
jitter buffer use the abstract jitter buffer API, which does not use
JB_TYPE_CONTROL frames.
Review: https://reviewboard.asterisk.org/r/1814/
(closes issue ASTERISK-18964)
Reported by: Kris Shaw
Tested by: Kris Shaw, Matt Jordan
Patches:
jitterbuffer-2012-2-26.diff uploaded by Kris Shaw (license 5722)
........
Merged revisions 359356 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 359358 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@359359 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When connected line support was added, the wait_for_answer() variable
single changed its meaning slightly. Unfortunately, the places where
single was used did not necessarily get updated to reflect that change.
Also audio/video frames were sent to all forked calls when the endpoints
were never made compatible.
* Don't pass audio/video media frames when the channels have not been made
compatible.
* Added handling of AST_CONTROL_SRCCHANGE to app_dial.c.
* Fixed app_dial.c passing on AST_CONTROL_HOLD because that frame can also
pass a requested MOH class.
(closes issue ASTERISK-16901)
Reported by: Chris Gentle
(closes issue ASTERISK-17541)
Reported by: clint
Review: https://reviewboard.asterisk.org/r/1805/
........
Merged revisions 359344 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 359355 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@359357 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch updates the NUMLOGLEVELS define in logger.h to 32, to match the fact
that logger.c implements 32 log levels (because of the custom log level stuff).
asterisk.c uses this define to size an array of levels per remote console.
This array is modified in ast_console_toggle_loglevel(), which is called by the
"logger set level" CLI command. While the documentation for the CLI command
doesn't make it terribly obvious, you can use this CLI command to toggle a
custom log level on a remote console, as well. However, doing so led to an
invalid array index in asterisk.c.
This array is read from any time a log message is written to a console. So,
all custom log level messages resulted in a bogus read if a remote console
was connected.
........
Merged revisions 359259 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 359260 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@359261 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The set_format() function was more subtle in how it modified the
struct ast_channel readtrans/writetrans values.
* Fixed ast_activate_generator() conversion correctly.
(closes issue ASTERISK-19434)
Reported by: Birger Harzenetter
Tested by: rmudgett
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@358861 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The process_output function in manager.c attempted to call fclose and close immediately
afterwards. Since fclose implies close, this resulted in a potential double free on file
descriptors. This patch changes that behavior and also adds error checking to fclose and
close depending on which was deemed necessary. Also error messages. Thanks to Rosen
Iliev for pointing out the location of the problem.
(closes issue ASTERISK-18453)
Reported By: Jaco Kroon
Review: https://reviewboard.asterisk.org/r/1793/
........
Merged revisions 358214 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 358215 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@358216 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This change fixes case-sensitivity for device-specific subscriptions such that
the technology identifier is case-insensitive while the remainder of the device
string is still case-sensitive. This should also preserve the original case of
the device string as passed in to the event system. CCSS is the only feature
affected as it is the only consumer of device-specific event subscriptions.
The second part of this patch addresses similar case-sensitivity issues within
CCSS itself that prevented it from functioning correctly after the fix to the
events system.
This adds a unit test to verify that the event system works as expected.
(closes issue ASTERISK-19422)
Review: https://reviewboard.asterisk.org/r/1780/
........
Merged revisions 357940 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 357941 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@357942 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The check if an ISDN call is bridged before it could be placed on hold is
not necessary and is overly restrictive. The check was originally done to
prevent problems with call transfers in case a user tried to transfer a
call connected to an application to another call connected to an
application. The ISDN transfer code has not required this restriction for
quite some time because ECT could transfer any two active calls to each
other.
* Remove ISDN hold restriction for calls connected to applications.
* Made ast_waitfordigit_full() ignore AST_CONTROL_HOLD and
AST_CONTROL_UNHOLD instead of generating a warning message.
(closes issue ASTERISK-19388)
Reported by: Birger Harzenetter
Tested by: rmudgett
........
Merged revisions 357894 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 357895 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@357896 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This takes two actions.
1. Move the reading of the alertpipe in __ast_read() to immediately before the
removal of frames from the readq. This means we won't do something silly like
read from the alertpipe, then ignore the fact that there's a frame to get from
the readq since channel's fdno is the AST_TIMING_FD.
2. When ast_settimeout() sets the rate to 0 and the timingfunc to NULL, if the
channel's fdno is the AST_TIMING_FD, then set the fdno to -1. This is because
if the rate is 0 and the timingfunc is NULL, it means that the channel's timing
fd is being invalidated, so any pending reads should not occur.
This may actually solve more issues than the referenced one below, but it's not
known at this time for sure.
(closes issue ASTERISK-19223)
reported by Frank-Michael Wittig
Review: https://reviewboard.asterisk.org/r/1779
........
Merged revisions 357761 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 357762 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@357775 65c4cc65-6c06-0410-ace0-fbb531ad65f3
In the change from 1.6.2 to 1.8, ast_sockaddr was introduced which changed the
behavior of ast_find_ourip such that port number was wiped out. This caused
the port in internip (which is used for Contact and Call-ID on NOTIFYs) to be
0. This change causes ast_find_ourip to be port-preserving again.
(closes issue ASTERISK-19430)
........
Merged revisions 357665 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 357667 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@357673 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Add the ability to specify what kind of locking an ao2 object has when it
is allocated. The locking could be one of: MUTEX, RWLOCK, or none.
New API:
ao2_t_alloc_options()
ao2_alloc_options()
ao2_t_container_alloc_options()
ao2_container_alloc_options()
ao2_rdlock()
ao2_wrlock()
ao2_tryrdlock()
ao2_trywrlock()
The OBJ_NOLOCK and AO2_ITERATOR_DONTLOCK flags have a slight meaning
change. They no longer mean that the object is protected by an external
mechanism. They mean the lock associated with the object has already been
manually obtained by one of the ao2_lock calls. This change is necessary
for RWLOCK support since they are not reentrant. Also an operation on an
ao2 container may require promoting a read lock to a write lock by
releasing the already held read lock to re-acquire as a write lock.
Replaced API calls:
ao2_t_link_nolock()
ao2_link_nolock()
ao2_t_unlink_nolock()
ao2_unlink_nolock()
with the respective
ao2_t_link_flags()
ao2_link_flags()
ao2_t_unlink_flags()
ao2_unlink_flags()
API calls to be more flexible and to allow an anticipated enhancement to
control linking duplicate objects into a container.
The changes to format.c and format_cap.c are taking advantange of the new
ao2 locking options to simplify the use of the format capabilities
containers.
Review: https://reviewboard.asterisk.org/r/1554/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@357272 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Occasionally there is a need to put all objects in one container also into
another container.
Some reasons you might need to do this:
1) You need to reconfigure a container. You would do this by creating a
new container with the new configuration and ao2_container_dup the old
container into it. Then replace the old container with the new. Then
destroy the old container.
2) You need the contents of a container to remain stable while operating
on all of the objects. You would do this by creating a cloned container
of the original with ao2_container_clone. The cloned container is a
snapshot of the objects at the time of the cloning. When done, just
destroy the cloned container.
Review: https://reviewboard.asterisk.org/r/1746/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@357145 65c4cc65-6c06-0410-ace0-fbb531ad65f3
* Fix opaquification conversion error.
(closes issue ASTERISK-19424)
Reported by: Jeremy Pepper
Patches:
asterisk-19424-initialize_priority_regression.diff (license #5026) patch uploaded by Michael L. Young
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@357101 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This commit adds GoSub alternatives to connected line, redirecting, and CCSS
macro hooks so that macro can finally be deprecated. This also adds
deprecation warnings for those features when used and in documentation.
Review: https://reviewboard.asterisk.org/r/1760/
(closes issue SWP-4256)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@357013 65c4cc65-6c06-0410-ace0-fbb531ad65f3
chan_iax2 to pass in the correct types.
chan_iax2 is the only consumer for the various ast_netsock_* functions in trunk
at this point, so this feels like a safe change to make.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@357005 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Currently, when using res_srtp, once the SRTP policy has been added to the
current session the policy is locked into place. Any attempt to replace an
existing policy, which would be needed if the remote endpoint negotiated a new
cryptographic key, is instead rejected in res_srtp. This happens in particular
in transfer scenarios, where the endpoint that Asterisk is communicating with
changes but uses the same RTP session.
This patch modifies res_srtp to allow remote and local policies to be reloaded
in the underlying SRTP library. From the perspective of users of the SRTP API,
the only change is that the adding of remote and local policies are now added
in a single method call, whereas they previously were added separately. This
was changed to account for the differences in handling remote and local
policies in libsrtp.
Review: https://reviewboard.asterisk.org/r/1741/
(closes issue ASTERISK-19253)
Reported by: Thomas Arimont
Tested by: Thomas Arimont
Patches:
srtp_renew_keys_2012_02_22.diff uploaded by Matt Jordan (license 6283)
(with some small modifications for this check-in)
........
Merged revisions 356604 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 356605 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@356606 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Custom parking extensions may not be coded such that the first and only
extension priority is the Park application. These custom parking
extensions will not be recognized as parking extensions. When a call is
blind transferred to an extension that is not recognized as a parking
extension, the normal blind transfer code causes the transferred channel
to start executing dialplan. Calls that get parked in this manner do not
know the original channel name that parked the call so the original parker
could never be called back if the parked call is not retrieved before the
timeout time. The parking space is also announced to the call being
parked as a side effect of not knowing the original parking channel.
* Fix handling of BLINDTRANSFER channel variable for call parking.
* Fixed SIP blind transfer using the wrong dialplan context variable to
check for the parking extension.
(closes issue ASTERISK-19322)
Reported by: aragon
Tested by: rmudgett, jparker
Review: https://reviewboard.asterisk.org/r/1730/
JIRA AST-766
........
Merged revisions 356521 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 356522 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@356523 65c4cc65-6c06-0410-ace0-fbb531ad65f3
If the res_calendar module was followed immediately by one of the
calendar tech modules and "core stop gracefully" was run, Asterisk
would crash.
This patch adds use count tracking for res_calendar so that it is
unloaded after the tech modules when shutting down gracefully. It
is now not possible to unload all the of the calendar modules via
"module unload res_calednar.so", but it is still possible to unload
them all via "module unload -h res_calendar.so".
Review: https://reviewboard.asterisk.org/r/1752/
........
Merged revisions 356291 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 356297 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@356314 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The accessors names for the "emulate_dtmf_digit" field on the ast_channel
are misleading. Change them to ast_channel_dtmf_digit_to_emulate*.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@356183 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This change permits each verbose destination (consoles, logger) to have its
own concept of what the verbosity level is. The big feature here is that
the logger will now be able to capture a particular verbosity level without
condemning each console to need to suffer that level of verbosity.
Additionally, a stray 'core set verbose' will no longer change what will go
to the log.
Review: https://reviewboard.asterisk.org/r/1599/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@355413 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The config parser in Asterisk does not currently remove a backslash that is
used to escape a semicolon which would otherwise be interpreted as the start
of a comment.
The change here causes that backslash to be removed, but does not create a
real escape system in the config parser. The biggest complication with a real
escape system would be breaking existing configs everywhere (parsing \\ as \
and breaking on escaped non-semicolon characters) even though it would be the
"right" way to do things.
(closes issue ASTERISK-17121)
Review: https://reviewboard.asterisk.org/r/1724/
........
Merged revisions 354655 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 354656 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@354657 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch removes some unnecessary locking of the channels container in
ast_hangup(). The reason this came up is that this lock can very quickly block
the entire system. If any of the channel cleanup code decides to block, it
causes a problem for the whole system. For example, when audiohooks get
destroyed, if that blocks for a while waiting on the mixmonitor thread to exit
because it's busy blocking on some I/O, it causes a problem for many other
threads in the meantime.
Review: https://reviewboard.asterisk.org/r/1712/
........
Merged revisions 354492 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 354493 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@354494 65c4cc65-6c06-0410-ace0-fbb531ad65f3
* Removes references to tlsbindport from http.conf.sample and manager.conf.sample
* Properly bind to port specified in tlsbindaddr, using the default port if specified.
* On a reload, properly close socket if the service has been disabled.
A note has been added to UPGRADE.txt to indicate how ports must be set for TLS.
(closes issue ASTERISK-16959)
reported by Olaf Holthausen
(closes issue ASTERISK-19201)
reported by Chris Mylonas
(closes issue ASTERISK-19204)
reported by Chris Mylonas
Review: https://reviewboard.asterisk.org/r/1709
........
Merged revisions 353770 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 353820 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@353821 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The CEL eventtype field for ODBC and PGSQL backends should be USER_DEFINED
instead of the user defined event name supplied by the CELGenUserEvent
application. If the field is output as a number, the user defined name
does not have a value and is always output as 21 for USER_DEFINED and the
userdeftype field would be required to supply the user defined name.
The following CEL backends (cel_odbc, cel_pgsql, cel_custom, cel_manager,
and cel_sqlite3_custom) can be independently configured to remove this
inconsistency.
* Allows cel_manager, cel_custom, and cel_sqlite3_custom to behave the
same way.
(closes issue ASTERISK-17189)
Reported by: Bryant Zimmerman
Review: https://reviewboard.asterisk.org/r/1669/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@353648 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When ast_channel name was opaquified, the channel search functions did not
get converted correctly. As a result ExtenSpy which uses a channel
iterator search by exten@context could never find anything.
* Updated the doxygen documentation for the search functions in channel.h.
Review: https://reviewboard.asterisk.org/r/1702/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@353647 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Asterisk's dnsmgr currently takes a pointer to an ast_sockaddr and updates it
anytime an address resolves to something different. There are a couple of
issues with this. First, the ast_sockaddr is usually the address of an
ast_sockaddr inside a refcounted struct and we never bump the refcount of those
structs when using dnsmgr. This makes it possible that a refresh could happen
after the destructor for that object is called (despite ast_dnsmgr_release
being called in that destructor). Second, the module using dnsmgr cannot be
aware of an address changing without polling for it in the code. If an action
needs to be taken on address update (like re-linking a SIP peer in the
peers_by_ip table), then polling for this change negates many of the benefits
of having dnsmgr in the first place.
This patch adds a function to the dnsmgr API that calls an update callback
instead of blindly updating the address itself. It also moves calls to
ast_dnsmgr_release outside of the destructor functions and into cleanup
functions that are called when we no longer need the objects and increments the
refcount of the objects using dnsmgr since those objects are stored on the
ast_dnsmgr_entry struct. A helper function for returning the proper default SIP
port (non-tls vs tls) is also added and used.
This patch also incorporates changes from a patch posted by Timo Teräs to
ASTERISK-19106 for related dnsmgr issues.
(closes issue ASTERISK-19106)
Review: https://reviewboard.asterisk.org/r/1691/
........
Merged revisions 353371 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 353397 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@353418 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When Asterisk is used with various third-party libraries (CURL, PostgresSQL,
many others) that have the ability themselves to use OpenSSL, it is possible
for conflicts to arise in how the OpenSSL libraries are initialized and
shutdown. This patch addresses these conflicts by 'wrapping' the important
functions from the OpenSSL libraries in a new shared library that is part
of Asterisk itself, and is loaded in such a way as to ensure that *all*
calls to these functions will be dispatched through the Asterisk wrapper
functions, not the native functions.
This new library is optional, but enabled by default. See the CHANGES file
for documentation on how to disable it.
Along the way, this patch also makes a few other minor changes:
* Changes MODULES_DIR to ASTMODDIR throughout the build system, in order to
more closely match what is used during run-time configuration.
* Corrects some errors in the configure script where AC_CHECK_TOOLS was used
instead of AC_PATH_PROG.
* Adds a new variable for linker flags in the build system (DYLINK), used for
producing true shared libraries (as opposed to the dynamically loadable
modules that the build system produces for 'regular' Asterisk modules).
* Moves the Makefile bits that handle installation and uninstallation of the
main Asterisk binary into main/Makefile from the top-level Makefile.
* Moves a couple of useful preprocessor macros from optional_api.h to
asterisk.h.
Review: https://reviewboard.asterisk.org/r/1006/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@353317 65c4cc65-6c06-0410-ace0-fbb531ad65f3
A long time ago, in a land far far away, we added "asterisk/ast_version.h",
which provides the ast_get_version() and ast_get_version_num() functions. These
were added so that modules that needed the version information for the Asterisk
instance they were loaded in could actually get it (as opposed the version that
they were compiled against). We changed everything in the tree to use the
new mechanism (although later main/test.c was added using the old method).
However, the old mechanism was never removed, and as a result, new code is
still trying to use it.
This commit removes asterisk/version.h and replaces it with a header that
will generate a compile-time error if you try to use it (the error message
tells you which header you should use instead). It also removes the Makefile
and build_tools bits that generated the file, and it updates main/test.c to
use the 'proper' method of getting the Asterisk version information.
This is an API change and thus is being committed for trunk only, but it's
a fairly minor one and definitely improves the situation for out-of-tree
modules.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@352626 65c4cc65-6c06-0410-ace0-fbb531ad65f3
* Fix authenticate MESSAGE losing custom headers added by the MESSAGE_DATA
function in the authorization attempt.
* Pass up better From header contents for SIP to use. Now is in the
"display-name" <URI> format expected by MessageSend. (Note that this is a
behavior change that could concievably affect some people.)
* Block user from adding standard headers that are added automatically.
(To, From,...)
* Allow the user to override the Content-Type header contents sent by
MessageSend.
* Decrement Max-Forwards header if the user transferred it from an
incoming message.
* Expand SIP short header names so the dialplan and other code only has to
deal with the full names.
* Documents what SIP expects in the MessageSend(from) parameter.
(closes issue ASTERISK-18992)
Reported by: Yuri
(closes issue ASTERISK-18917)
Reported by: Shaun Clark
Review: https://reviewboard.asterisk.org/r/1683/
........
Merged revisions 352520 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@352538 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Continue channel opaque-ification by wrapping all of the stringfields.
Eventually, we will restrict what can actually set these variables, but
the purpose for now is to hide the implementation and keep people from
adding code that directly accesses the channel structure. Semantic
changes will follow afterward.
Review: https://reviewboard.asterisk.org/r/1661/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@352348 65c4cc65-6c06-0410-ace0-fbb531ad65f3
* Adds per-parking lot options comebackcontext and comebackdialtime
* Makes comebacktoorigin settable per parking lot
* Sets a PARKER channel variable when comebacktoorigin is disabled
(closes issue ASTERISK-16643)
Reported by: Mitch Sharp (bluecrow76)
Patches:
asterisk-1.6.2.17.2-park-features-comebackcontext-consolidated-v3.diff by Mitch Sharp (bluecrow76) license 5231
with updates by me.
Review: https://reviewboard.asterisk.org/r/1674
Review: https://reviewboard.asterisk.org/r/963
Reviewed by Richard Mudgett
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@351913 65c4cc65-6c06-0410-ace0-fbb531ad65f3
OpenBSD defines SO_PEERCRED, but it returns a 'struct sockpeercred', not
'struct ucred', which causes compilation of main/asterisk.c to fail in
read_credentials(). This allows configure to check for sockpeercred and
asterisk to deal with it properly.
(closes issue ASTERISK-18929)
Reported-by: Barry Miller
Patch-by: Barry Miller
........
Merged revisions 350730 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 350731 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@350732 65c4cc65-6c06-0410-ace0-fbb531ad65f3
None of the parameters to ast_bridge_call() can be NULL for the bridge to
work so no need to check for it.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@350644 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Multiple revisions 350555,350571
........
r350555 | rmudgett | 2012-01-13 11:12:51 -0600 (Fri, 13 Jan 2012) | 12 lines
Add missing CEL logging fields to various CEL backends.
* Add missing eventextra to cel_psql.c and cel_odbc.c.
* Add missing PeerAccount and EventExtra to cel_manager.c.
* Add missing userdeftype support for cel_custom.conf.sample and
cel_sqlite3_custom.conf.sample.
(closes issue ASTERISK-17190)
Reported by: Bryant Zimmerman
........
r350571 | rmudgett | 2012-01-13 11:23:57 -0600 (Fri, 13 Jan 2012) | 8 lines
Use compatible names for event extra data for various CEL backends.
* Change eventextra to extra in cel_psql.c and cel_odbc.c.
* Change EventExtra to Extra in cel_manager.c.
(issue ASTERISK-17190)
........
Merged revisions 350555,350571 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 350585 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@350605 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch addresses two issues in ConfBridge and the channel bridge layer:
1. It fixes a race condition wherein the bridge channel could be hung up
2. It removes the deadlock avoidance from the bridging layer and makes the
bridge_pvt an ao2 ref counted object
Patch by David Vossel (mjordan was merely the commit monkey)
(issue ASTERISK-18988)
(closes issue ASTERISK-18885)
Reported by: Dmitry Melekhov
Tested by: Matt Jordan
Patches: chan_bridge_cleanup_v.diff uploaded by David Vossel (license 5628)
(closes issue ASTERISK-19100)
Reported by: Matt Jordan
Tested by: Matt Jordan
Review: https://reviewboard.asterisk.org/r/1654/
........
Merged revisions 350550 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@350551 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Initially, support was left in for the old style of searching, even
though it wasn't actually used. In the case of name_len != 0, the
OBJ_KEY flag isn't passed because we aren't matching on a full key
and therefor can't use the hash function to optimize. The code left
in to support the old way of searching unfortunately treated a prefix
search like this as though an ast_channel struct was passed as an arg
and caused a crash.
This patch also adds needed parentheses around some matching conditions.
(closes issue ASTERISK-19182)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@350365 65c4cc65-6c06-0410-ace0-fbb531ad65f3
There are many benefits to making the ast_channel an opaque handle, from
increasing maintainability to presenting ways to kill masquerades. This patch
kicks things off by taking things a field at a time, renaming the field to
'__do_not_use_${fieldname}' and then writing setters/getters and converting the
existing code to using them. When all fields are done, we can move ast_channel
to a C file from channel.h and lop off the '__do_not_use_'.
This patch sets up main/channel_interal_api.c to be the only file that actually
accesses the ast_channel's fields directly. The intent would be for any API
functions in channel.c to use the accessor functions. No more monkeying around
with channel internals. We should use our own APIs.
The interesting changes in this patch are the addition of
channel_internal_api.c, the moving of the AST_DATA stuff from channel.c to
channel_internal_api.c (note: the AST_DATA stuff will have to be reworked to
use accessor functions when ast_channel is really opaque), and some re-working
of the way channel iterators/callbacks are handled so as to avoid creating fake
ast_channels on the stack to pass in matching data by directly accessing fields
(since "name" is a stringfield and the fake channel doesn't init the
stringfields, you can't use the ast_channel_name_set() function). I went with
ast_channel_name(chan) for a getter, and ast_channel_name_set(chan, name) for a
setter.
The majority of the grunt-work for this change was done by writing a semantic
patch using Coccinelle ( http://coccinelle.lip6.fr/ ).
Review: https://reviewboard.asterisk.org/r/1655/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@350223 65c4cc65-6c06-0410-ace0-fbb531ad65f3
If a db_sync was scheduled just before shutdown, the atexit code calling
db_sync would have no effect, causing the astdb commit thread to stay
alive. This caused the SIP/realtime_sipregs test to fail. (The fallback
kill would run the atexit code again and that would wreak havoc.) This
fixes that the atexit kill condition is picked up properly.
(closes issue ASTERISK-18883)
Reviewed by: Terry Wilson
Review: https://reviewboard.asterisk.org/r/1659
........
Merged revisions 350180 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@350181 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The Asterisk -x command line parameter is documented inconsistently.
* Made the -x documentation and behavior consistent.
* Since this is also a new year, updated the copyright notices while here.
(closes issue ASTERISK-19094)
Reported by: Eugene
Patches:
issueA19094_correct_asterisk_option_x.patch (license #5674) patch uploaded by Walter Doekes (modified)
Tested by: Eugene
........
Merged revisions 350075 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 350076 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@350077 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When receiving calls from a mobile phone into a DISA system on a connection with
significant interference, the reporter's Asterisk system would interpret DTMF incorrectly
and replicate digits received. This patch resolves that by increasing the number of
frames a mismatch has to be detected before assuming the DTMF is over by 1 frame and
adjusts dtmf_detect function to reset hits and misses only when an edge is detected.
(closes issue ASTERISK-17493)
Reported by: Alec Davis
Patches:
bug18904-refactor.diff.txt uploaded by Alec Davis (license 5546)
Review: https://reviewboard.asterisk.org/r/1130/
........
Merged revisions 349728 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 349729 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@349730 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When catching a signal, in no fork mode the console thread is identical to the thread
responsible for catching the signal and closing Asterisk, which requires it to first
dispense with the console thread. Prior to this patch, if these threads were identical,
upon receiving a killing signal, the thread will send an URG signal to itself, which
we also catch and then promptly do nothing with. Obviously this isn't useful behavior.
(closes issue ASTERISK-19127)
Reported By: Bryon Clark
Patches:
quit_on_signals.patch uploaded by Bryon Clark (license 6157)
........
Merged revisions 349672 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 349673 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@349674 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Failing to handle AST_CONTROL_UPDATE_RTP_PEER frames in the local bridge loop
causes the loop to exit prematurely. This causes a variety of negative side
effects, depending on when the loop exits. This patch handles the frame by
essentially swallowing the frame in the local loop, as the current channel
drivers expect the RTP bridge to handle the frame, and, in the case of the
local bridge loop, no additional action is necessary.
(issue ASTERISK-19040)
(issue ASTERISK-19128)
(issue ASTERISK-17725)
(issue ASTERISK-18340)
(closes issue ASTERISK-19095)
Reported by: Stefan Schmidt
Tested by: Matt Jordan
Review: https://reviewboard.asterisk.org/r/1640/
........
Merged revisions 349339 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 349340 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@349341 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This commit removes the V.21 preamble detection code previously added to the
generic DSP implementation in Asterisk, and instead enhances the res_fax module
to be able to utilize V.21 preamble detection functionality made available by
FAX technology modules. This commit also adds such support to res_fax_spandsp,
which uses the Spandsp modem tone detection code to do the V.21 preamble
detection.
There should be no functional change here, other than much more reliable V.21
preamble detection (and thus T.38 gateway initiation).
........
Merged revisions 349248 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@349249 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Adds two new options to SIP peers allowing them to specify features (dynamic or builtin)
to use when sending INFO/record requests. Recordonfeature activates whatever feature
is specified when recieving a record: on request while recordofffeature activates
whatever feature is specified when receiving a record: off request. Both of these
features can be disabled by setting the feature to an empty string.
(closes issue ASTERISK-16507)
Reported by: Jon Bright
Review: https://reviewboard.asterisk.org/r/1634/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@349098 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Chan_sip gives a dialog reference to the extension state callback and
assumes that when ast_extension_state_del() returns, the callback cannot
happen anymore. Chan_sip then reduces the dialog reference count
associated with the callback. Recent changes (ASTERISK-17760) have
resulted in the potential for the callback to happen after
ast_extension_state_del() has returned. For chan_sip, this could be very
bad because the dialog pointer could have already been destroyed.
* Added ast_extension_state_add_destroy() so chan_sip can account for the
sip_pvt reference given to the extension state callback when the extension
state callback is deleted.
* Fix pbx.c awkward statecbs handling in ast_extension_state_add_destroy()
and handle_statechange() now that the struct ast_state_cb has a destructor
to call.
* Ensure that ast_extension_state_add_destroy() will never return -1 or 0
for a successful registration.
* Fixed pbx.c statecbs_cmp() to compare the correct information. The
passed in value to compare is a change_cb function pointer not an object
pointer.
* Make pbx.c ast_merge_contexts_and_delete() not perform callbacks with
AST_EXTENSION_REMOVED with locks held. Chan_sip is notorious for
deadlocking when those locks are held during the callback.
* Removed unused lock declaration for the pbx.c store_hints list.
(closes issue ASTERISK-18844)
Reported by: rmudgett
Review: https://reviewboard.asterisk.org/r/1635/
........
Merged revisions 348940 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 348952 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@348953 65c4cc65-6c06-0410-ace0-fbb531ad65f3
* Add locking when a channel inherits variables and datastores in
__ast_request_and_dial() and ast_call_forward(). Note: The involved
channels are not active so there was minimal potential for problems.
* Remove calls to ast_set_callerid() in __ast_request_and_dial() and
ast_call_forward() because the set information is for the wrong direction.
* Don't use C++ keywords for variable names in ast_call_forward().
* Run the redirecting interception macro if defined when forwarding a call
in ast_call_forward(). Note: Currently will never execute because the
only callers that supply a calling channel supply a hungup or zombie
channel.
* Make feature_request_and_dial() put the transferee into autoservice when
it calls ast_call_forward() in case a redirection interception macro is
run. Note: Currently will never happen because the caller channel (Party
B) is always hungup at this time.
* Make feature_request_and_dial() ignore the AST_CONTROL_PROCEEDING frame
to silence a log message.
........
Merged revisions 348464 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 348465 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@348466 65c4cc65-6c06-0410-ace0-fbb531ad65f3
PARKEDCALL variable tracks which parking lot the call was last parked in. This can be
used afterwards for flow control when returntoorigin is set to off. I went ahead and
documented both this and the existing variable set during timeout (PARKINGSLOT) in
the sample features.conf since there was no prior mention of variables being set during
timeout.
(closes issue ASTERISK-16239)
Reported By: Clod Patry
Patches:
M17503.diff uploaded by Clod Patry (license 5138)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@348161 65c4cc65-6c06-0410-ace0-fbb531ad65f3
During testing, it was discovered that there were a number of side effects
introduced by r346391 and subsequent check-ins related to it (r346429,
r346617, and r346655). This included the /main/stdtime/ test 'hanging',
as well as the remote console option failing to receive the appropriate output
after a period of time.
I only backed out the changes to main/ and utils/, as this was adequate
to reverse the behavior experienced.
(issue ASTERISK-18974)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@347997 65c4cc65-6c06-0410-ace0-fbb531ad65f3
* Simplify compare_char() and avoid potential sign extension issue.
* Fix infinite loop in add_exten_to_pattern_tree() handling of character
set escape handling.
* Added buffer overflow checks in add_exten_to_pattern_tree() character
set collection.
* Made ignore empty character sets.
* Added escape character handling to end-of-range character in character
sets. This has a slight change in behavior if the end-of-range character
is an escape character. You must now escape it.
* Fix potential sign extension issue when expanding character set ranges.
* Made remove duplicated characters from character sets. The duplicate
characters lower extension matching priority and prevent duplicate
extension detection.
* Fix escape character handling when the escape character is trying to
escape the end-of-string. We could have continued processing characters
after the end of the exten string. We could have added the previous
character to the pattern matching tree incorrectly.
(closes issue ASTERISK-18909)
Reported by: Luke-Jr
........
Merged revisions 347811 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 347812 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@347813 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When a bridge is broken, ast_bridge_call() might execute the h exten on
the calling channel. However, that channel may not have been the channel
that broke the bridge by hanging up. The channel executing the h exten
must be in a hung up state so things like AGI run in the correct mode.
* Make sure ast_bridge_call() marks the channel it is executing the h
exten on as hung up. (The AST_SOFTHANGUP_APPUNLOAD flag is used so as to
match the pbx.c main dialplan execution loop when it executes the h
exten.)
(closes issue ASTERISK-18811)
Reported by: David Hajek
Patches:
jira_asterisk_18811_v1.8.patch (license #5621) patch uploaded by rmudgett
Tested by: David Hajek, rmudgett
........
Merged revisions 347595 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 347600 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@347601 65c4cc65-6c06-0410-ace0-fbb531ad65f3
If waitExten specifies a music class to use with its music on hold option, it will use
CHANNEL(musicclass) instead if that channel variable has been set on the initiating
channel. This documents that behavior in the waitExten app so that this can be known
without checking the documentation of the code in function local_ast_moh_start.
(closes issue ASTERISK-18804)
........
Merged revisions 347239 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 347240 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@347241 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Prior to this patch, if labels with the same name were used for different priorities in
the same extension, the new label would be accepted, but it would be unusable since
attempts to reach that label would just go to the first one. Now pbx.c detects this,
generates a warning in logs, and culls the label before adding it to the dialplan.
(closes issue ASTERISK-18807)
Reported by: Kenneth Shumard
Patches:
pbx.c.patch uploaded by Kenneth Shumard (License 5077)
........
Merged revisions 346954 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 346955 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@346956 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The STUN socket must remain open between polls or the external address
seen by the STUN server is likely to change. However, if the STUN request
poll fails then the STUN server address needs to be re-resolved and the
STUN socket needs to be closed and reopened.
* Re-resolve the STUN server address and create a new socket if the STUN
request poll fails.
* Fix ast_stun_request() return value consistency.
* Fix ast_stun_request() to check the received packet for expected message
type and transaction ID.
* Fix ast_stun_request() to read packets until timeout or an associated
response packet is found. The stun_purge_socket() hack is no longer
required.
* Reduce ast_stun_request() error messages to debug output.
* No longer pass in the destination address to ast_stun_request() if the
socket is already bound or connected to the destination.
(closes issue ASTERISK-18327)
Reported by: Wolfram Joost
Tested by: rmudgett
Review: https://reviewboard.asterisk.org/r/1595/
........
Merged revisions 346700 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 346701 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@346709 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Cleaning up chan_sip/tcptls file descriptor closing.
This patch attempts to eliminate various possible instances of undefined behavior caused
by invoking close/fclose in situations where fclose may have already been issued on a
tcptls_session_instance and/or closing file descriptors that don't have a valid index
for fd (-1). Thanks for more than a little help from wdoekes.
(closes issue ASTERISK-18700)
Reported by: Erik Wallin
(issue ASTERISK-18345)
Reported by: Stephane Cazelas
(issue ASTERISK-18342)
Reported by: Stephane Chazelas
Review: https://reviewboard.asterisk.org/r/1576/
........
Merged revisions 346564 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 346565 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@346566 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch attempts to eliminate various possible instances of undefined behavior caused
by invoking close/fclose in situations where fclose may have already been issued on a
tcptls_session_instance and/or closing file descriptors that don't have a valid index
for fd (-1). Thanks for more than a little help from wdoekes.
(closes issue ASTERISK-18700)
Reported by: Erik Wallin
(issue ASTERISK-18345)
Reported by: Stephane Cazelas
(issue ASTERISK-18342)
Reported by: Stephane Chazelas
Review: https://reviewboard.asterisk.org/r/1576/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@346525 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/10
........
r346349 | dvossel | 2011-11-28 18:00:11 -0600 (Mon, 28 Nov 2011) | 10 lines
Fixes memory leak in message API.
The ast_msg_get_var function did not properly decrement
the ref count of the var it retrieves. The way this is
implemented is a bit tricky, as we must decrement the var and then
return the var's value. As long as the documentation for the
function is followed, this will not result in a dangling pointer as
the ast_msg structure owns its own reference to the var while it
exists in the var container.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@346350 65c4cc65-6c06-0410-ace0-fbb531ad65f3
int blah = 1;
...
write(chan->alertpipe[1], &blah, new_frames * sizeof(blah)) !=
(new_frames * sizeof(blah)))
is only valid when new_frames == 1. Otherwise we start reading into adjacent
variables declared on the stack. The read end discards what is read, so the
values don't matter but it's not a good idea to read past where we want even
though new_frames is almost always 1 and should never be large. This patch is
basically taken out of kpfleming's eventfd branch, as he mentioned that he
remembered fixing it there when I talked to him about this issue.
Review: https://reviewboard.asterisk.org/r/1583/
........
Merged revisions 345163 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 345164 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@345165 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch fixes the format type check in ast_closestream and
filestream_destructor. Previously a comparison operator was used, but since
audio formats are no longer contiguous (and AST_FORMAT_AUDIO_MASK includes
formats that have a value greater than the video formats), a bitwise AND
operation is used instead. Duplicated code was also moved to filestream_close.
(closes issue ASTERISK-18682)
Reported by: Aldo Bedrij
Tested by: Matt Jordan
Review: https://reviewboard.asterisk.org/r/1580/
........
Merged revisions 344823 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 344842 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@344844 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Holding the channel lock while the CLI "core show channel" command is
executing can slow down the system. It could block the system if the
console output is halted or paused.
* Made capture the CLI "core show channel" output into a buffer to be
output after the channel is unlocked.
* Removed use of C++ keyword as a variable name. out renamed to obuf.
* Checked allocation of obuf for failure so will not crash.
(closes issue ASTERISK-18571)
Reported by: Pavel Troller
Tested by: rmudgett
........
Merged revisions 344661 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 344662 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@344663 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/10
........
r344493 | dvossel | 2011-11-10 15:54:42 -0600 (Thu, 10 Nov 2011) | 12 lines
Fixes issue with ConfBridge participants hanging up during DTMF feature menu usage getting stuck in conference forever.
When a conference user enters the DTMF menu they are suspended from the
bridge while the channel is handed off to the DTMF feature code. If a
user entered this state and hungup, there existed a race condition where
the channel could not exit the conference because it was waiting on a
signal that would never arrive. This patch fixes that, because it would
stupid for me to talk about the problem and commit a patch for something else.
(closes issue ASTERISK-18829)
Reported by: zvision
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@344494 65c4cc65-6c06-0410-ace0-fbb531ad65f3
* Fixed a LOG_ERROR message referencing the config variable list v that
had previously been processed and became NULL.
* Added error return value set that was missing in an ast_append_ha()
error return path.
(closes issue ASTERISK-18743)
Reported by: Michele
Patches:
issueA18743-fix_dynamic_exclude_static_bad_host_log.patch (license #5674) patch uploaded by Walter Doekes
Tested by: Michele
........
Merged revisions 343851 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 343852 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@343853 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Integers should always be aligned. For some platforms (ARM, SPARC) this
is more important than for others. This changeset ensures that the
string field string lengths are aligned on *all* platforms, not just on
the SPARC for which there was a workaround. It also fixes that the
length integer can be resized to 32 bits without problems if needed.
(closes issue ASTERISK-17310)
Reported by: radael, S Adrian
Reviewed by: Tzafrir Cohen, Terry Wilson
Tested by: S Adrian
Review: https://reviewboard.asterisk.org/r/1549
........
Merged revisions 343157 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 343158 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@343163 65c4cc65-6c06-0410-ace0-fbb531ad65f3
There were several problems with the dynamic realtime peer/user lookup
code. The lookup logic had become rather hard to read due to lots of
incremental changes to the realtime_peer function. And, during the
addition of the sipregs functionality, several possibilities for memory
leaks had been introduced. The insecure=port matching has always been
broken for anyone using the sipregs family. And, related, the broken
implementation forced those using sipregs to *still* have an ipaddr
column on their sippeers table.
Thanks Terry Wilson for comprehensive testing and finding and fixing
unexpected behaviour from the multientry realtime call which caused
the realtime_peer to have a completely unused code path.
This changeset fixes the leaks, the lookup inconsistenties and that
you won't need an ipaddr column on your sippeers table anymore (when
you're using sipregs). Beware that when you're using sipregs, peers
with insecure=port will now start matching!
(closes issue ASTERISK-17792)
(closes issue ASTERISK-18356)
Reported by: marcelloceschia, Walter Doekes
Reviewed by: Terry Wilson
Review: https://reviewboard.asterisk.org/r/1395
........
Merged revisions 342927 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 342929 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@342930 65c4cc65-6c06-0410-ace0-fbb531ad65f3
* Fixed typo in format_cap.c:joint_copy_helper() using the wrong variable.
* Fix potential race between checking if an interface exists and adding it
to the container in format.c:ast_format_attr_reg_interface().
* Fixed double rwlock destroy in format.c:ast_format_attr_init() error
exit path.
* Simplified format.c:find_interface() and format.c:has_interface().
........
Merged revisions 342824 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@342825 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When an extension is removed from a context, its entry in the pattern match
tree is not deleted. Instead, the extension is marked as deleted. When an
extension is removed and re-added, if that extension is also a prefix of
another extension, several log messages would report an error and did not
check whether or not the extension was deleted before accessing the memory.
Additionally, if the extension was already in the tree but previously
deleted, and the pattern was at the end of a match, the findonly flag was
not honored and the extension would be erroneously undeleted.
Additionaly, it was discovered that an IAX2 peer could be unregistered
via the CLI, while at the same time it could be scheduled for unregistration
by Asterisk. The unregistration method now checks to see if the peer
was already unregistered before continuing with an unregistration.
(closes issue ASTERISK-18135)
Reported by: Jaco Kroon, Henry Fernandes, Kristijan Vrban
Tested by: Matt Jordan
Review: https://reviewboard.asterisk.org/r/1526
........
Merged revisions 342769 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 342770 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@342771 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The fix for ASTERISK-12715 and ASTERISK-12685 added a check for the Park
application because the channel needed to be masqueraded to prevent a
crash. Since the Park application now always masquerades the channel into
the parking lot, the special check is no longer needed. The fix also
resulted in AGI exec Park attempting to double park the call and not honor
the Park application parameters.
* Removed no longer necessary call to ast_masq_park_call() by AGI exec for
the Park application. (Reverts -r146923)
* Fix Park application to only return 0 or -1. The AGI exec Park was
causing broken pipe error messages because the Park application returned 1
on successful park.
(closes issue ASTERISK-18737)
........
Merged revisions 341717 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 341718 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@341719 65c4cc65-6c06-0410-ace0-fbb531ad65f3
* Fix potential deadlocks in SIP and IAX blind transfer to parking.
* Fix SIP, IAX, DAHDI analog, and MGCP channel drivers to respect the
parkext_exclusive option with transfers (Park(,,,,,exclusive_lot)
parameter). Created ast_park_call_exten() and ast_masq_park_call_exten()
to maintian API compatibility.
* Made masq_park_call() handle a failed ast_channel_masquerade() setup.
* Reduced excessive struct parkeduser.peername[] size.
........
Merged revisions 341254 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 341255 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@341256 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Party A calls Party B.
Party A DTMF blind transfers Party B to Party C.
Party A channel continues to execute dialplan.
* Fixed the return value of builtin_blindtransfer() to return the correct
value after a transfer so the dialplan will not keep executing.
* Removed unnecessary connected line update that did not really do
anything.
* Made access to GOTO_ON_BLINDXFR thread safe in check_goto_on_transfer().
* Fixed leak of xferchan for failure cases in check_goto_on_transfer().
* Updated debug messages in builtin_blindtransfer() and
check_goto_on_transfer().
(closes issue ASTERISK-18275)
Reported by: rmudgett
Tested by: rmudgett
........
Merged revisions 340809 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 340810 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@340813 65c4cc65-6c06-0410-ace0-fbb531ad65f3
* Fixed race between calling an AMI action callback and unregistering that
action. Refixes ASTERISK-13784 broken by ASTERISK-17785 change.
* Fixed potential memory leak if an AMI action failed to get registered
because is already was registered. Part of the ao2 conversion.
* Fixed AMI ListCommands action not walking the actions list with a lock
held.
* Fix usage of ast_strdupa() and alloca() in loops. Excess stack usage.
* Fix AMI Originate action Variable header requiring a space after the
header colon. Reported by Yaroslav Panych on the asterisk-dev list.
* Increased the number of listed variables allowed per AMI Originate
action Variable header to 64.
* Fixed AMI GetConfigJSON action output format.
* Fixed usage of res contents outside of scope in append_channel_vars().
* Fixed inconsistency of config file channelvars option. The values no
longer accumulate with every channelvars option in the config file. Only
the last value is kept to be consistent with the CLI "manager show
settings" command.
(closes issue ASTERISK-18479)
Reported by: Jaco Kroon
........
Merged revisions 340279 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 340281 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@340282 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/10
........
r340222 | twilson | 2011-10-10 15:55:39 -0700 (Mon, 10 Oct 2011) | 8 lines
On astdb conversion, also warn about permissions requirements
The user running Asterisk must have permission to the directory
the Asterisk database resides in since SQLite 3 needs to be able
to create a journal file.
(closes issue ASTERISK-18174)
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@340223 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/10
................
r340109 | mnicholson | 2011-10-10 09:15:41 -0500 (Mon, 10 Oct 2011) | 18 lines
Merged revisions 340108 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r340108 | mnicholson | 2011-10-10 09:14:48 -0500 (Mon, 10 Oct 2011) | 11 lines
Load the proper XML documentation when multiple modules document the same application.
This patch adds an optional "module" attribute to the XML documentation spec
that allows the documentation processor to match apps with identical names from
different modules to their documentation. This patch also fixes a number of
bugs with the documentation processor and should make it a little more
efficient. Support for multiple languages has also been properly implemented.
ASTERISK-18130
Review: https://reviewboard.asterisk.org/r/1485/
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@340110 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/10
................
r339626 | rmudgett | 2011-10-06 12:53:00 -0500 (Thu, 06 Oct 2011) | 25 lines
Merged revisions 339625 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r339625 | rmudgett | 2011-10-06 12:49:38 -0500 (Thu, 06 Oct 2011) | 18 lines
Fix debugging messages generated by 'udptl debug'.
* Makes chan_sip set the tag to the channel name.
* Fixes received debug message sequence number.
* Removed tx/rx debug message type since it was hard coded to 0.
* Made udptl.c logged message header consistent if possible: "UDPTL (%s): ".
* Removed unused rx_expected_seq_no from struct ast_udptl.
(closes issue ASTERISK-18401)
Reported by: Kevin P. Fleming
Patches:
jira_asterisk_18401_v1.8.patch (license #5621) patch uploaded by rmudgett
Tested by: Matthew Nicholson
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@339627 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/10
................
r339353 | jrose | 2011-10-04 14:44:02 -0500 (Tue, 04 Oct 2011) | 18 lines
Merged revisions 339352 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r339352 | jrose | 2011-10-04 14:33:12 -0500 (Tue, 04 Oct 2011) | 12 lines
Removes improper use of sound 'and' in German language mode from application saynumber
Asterisk would say 'Five hundert und sechs und zwanzig' instead of 'Five hundert sechs
und zwanzig'... which is both weird sounding and wrong. This patch makes sure Asterisk
will only say the 'and' word between the single digit and double digit places.
(closes issue ASTERISK-18212)
Reported By: Lionel Elie Mamane
Patches:
upstream_germand_no_and.diff (License #5402) uploaded by Lionel Elie Mamane
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@339354 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/10
................
r339088 | twilson | 2011-10-03 11:44:27 -0700 (Mon, 03 Oct 2011) | 17 lines
Merged revisions 339086 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r339086 | twilson | 2011-10-03 11:40:52 -0700 (Mon, 03 Oct 2011) | 10 lines
Properly ignore AST_CONTROL_UPDATE_RTP_PEER in more places
After the change in r336294, the new AST_CONTROL_UPDATE_RTP_PEER frame
is sent when a re-invite happens. If we receive a re-invite from a device
the waitstream_core was not aware of the new control frame and would drop
the call.
(closes issue ASTERISK-18610)
Reported by: Kristijan_Vrban
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@339090 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/10
................
r337974 | rmudgett | 2011-09-26 14:35:23 -0500 (Mon, 26 Sep 2011) | 37 lines
Merged revisions 337973 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r337973 | rmudgett | 2011-09-26 14:30:39 -0500 (Mon, 26 Sep 2011) | 30 lines
Fix deadlock when using dummy channels.
Dummy channels created by ast_dummy_channel_alloc() should be destoyed by
ast_channel_unref(). Using ast_channel_release() needlessly grabs the
channel container lock and can cause a deadlock as a result.
* Analyzed use of ast_dummy_channel_alloc() and made use
ast_channel_unref() when done with the dummy channel. (Primary reason for
the reported deadlock.)
* Made app_dial.c:dial_exec_full() not call ast_call() holding any channel
locks. Chan_local could not perform deadlock avoidance correctly.
(Potential deadlock exposed by this issue. Secondary reason for the
reported deadlock since the held lock was part of the deadlock chain.)
* Fixed some uses of ast_dummy_channel_alloc() not checking the returned
channel pointer for failure.
* Fixed some potential chan=NULL pointer usage in func_odbc.c. Protected
by testing the bogus_chan value.
* Fixed needlessly clearing a 1024 char auto array when setting the first
char to zero is enough in manager.c:action_getvar().
(closes issue ASTERISK-18613)
Reported by: Thomas Arimont
Patches:
jira_asterisk_18613_v1.8.patch (license #5621) patch uploaded by rmudgett
Tested by: Thomas Arimont
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@337975 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/10
........
r337595 | jrose | 2011-09-22 10:35:50 -0500 (Thu, 22 Sep 2011) | 12 lines
Generate Security events in chan_sip using new Security Events Framework
Security Events Framework was added in 1.8 and support was added for AMI to generate
events at that time. This patch adds support for chan_sip to generate security events.
(closes issue ASTERISK-18264)
Reported by: Michael L. Young
Patches:
security_events_chan_sip_v4.patch (license #5026) by Michael L. Young
Review: https://reviewboard.asterisk.org/r/1362/
........
r337597 | jrose | 2011-09-22 10:47:05 -0500 (Thu, 22 Sep 2011) | 10 lines
Forgot to svn add new files to r337595
Part of Generating security events for chan_sip
(issue ASTERISK-18264)
Reported by: Michael L. Young
Patches:
security_events_chan_sip_v4.patch (License #5026) by Michael L. Young
Reviewboard: https://reviewboard.asterisk.org/r/1362/
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@337600 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/10
................
r337431 | irroot | 2011-09-22 08:29:09 +0200 (Thu, 22 Sep 2011) | 25 lines
Merged revisions 337430 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r337430 | irroot | 2011-09-22 08:18:33 +0200 (Thu, 22 Sep 2011) | 19 lines
Its possible to loose audio on ast_write when the channel is not transcoded correctly.
in the case of DAHDI the channel is hungup.
This patch tries to "fix" the problem and make the channel compatiable and warn the user of
this problem.
Please note there is a underlying problem with codec negotion this does not fix the problem
it does try to rectify it and prevent loss of service.
Review: https://reviewboard.asterisk.org/r/1442/
(closes issue ASTERISK-17541)
(closes issue ASTERISK-18063)
(issue ASTERISK-14384)
(issue ASTERISK-17502)
(issue ASTERISK-18325)
(issue ASTERISK-18422)
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@337432 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/10
........
r337219 | oej | 2011-09-21 11:32:50 +0200 (Ons, 21 Sep 2011) | 13 lines
Make ast_pbx_run() not default to s@default if extension is not found
Review: https://reviewboard.asterisk.org/r/1446/
This is a bug - or architecture mistake - that has been in Asterisk for a
very long time. It was exposed by the AMI originate action and possibly
some other applications. Most channel drivers checks if an extension
exists BEFORE starting a pbx on an inbound call, so most calls will
not depend on this issue.
Thanks everyone involved in the review and on IRC and the mailing list
for a quick review and all the feedback.
(closes issue ASTERISK-18578)
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@337220 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/10
................
r337120 | mjordan | 2011-09-20 17:49:36 -0500 (Tue, 20 Sep 2011) | 28 lines
Merged revisions 337118 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r337118 | mjordan | 2011-09-20 17:38:54 -0500 (Tue, 20 Sep 2011) | 21 lines
Fix for incorrect voicemail duration in external notifications
This patch fixes an issue where the voicemail duration was being reported
with a duration significantly less than the actual sound file duration.
Voicemails that contained mostly silence were reporting the duration of
only the sound in the file, as opposed to the duration of the file with
the silence. This patch fixes this by having two durations reported in
the __ast_play_and_record family of functions - the sound_duration and the
actual duration of the file. The sound_duration, which is optional, now
reports the duration of the sound in the file, while the actual full duration
of the file is reported in the duration parameter. This allows the voicemail
applications to use the sound_duration for minimum duration checking, while
reporting the full duration to external parties if the voicemail is kept.
(issue ASTERISK-2234)
(closes issue ASTERISK-16981)
Reported by: Mary Ciuciu, Byron Clark, Brad House, Karsten Wemheuer, KevinH
Tested by: Matt Jordan
Review: https://reviewboard.asterisk.org/r/1443
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@337124 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/10
................
r337062 | kmoore | 2011-09-20 16:05:01 -0500 (Tue, 20 Sep 2011) | 18 lines
Merged revisions 337061 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r337061 | kmoore | 2011-09-20 16:04:11 -0500 (Tue, 20 Sep 2011) | 11 lines
Make CANMATCH with the new pattern match engine behave more like the old one
When checking an extension for E_CANMATCH using the new extension matching
algorithm, an exact match was not returned as a possible match resulting in the
queue failing to allow a caller to exit on DTMF. This removes the requirement
that an extension be longer than acquired digits for an E_CANMATCH operation
to succeed.
(closes issue ASTERISK-18044)
Review: https://reviewboard.asterisk.org/r/1367/
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@337063 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/10
................
r336734 | tilghman | 2011-09-19 15:29:40 -0500 (Mon, 19 Sep 2011) | 18 lines
Merged revisions 336733 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r336733 | tilghman | 2011-09-19 15:27:03 -0500 (Mon, 19 Sep 2011) | 11 lines
Various changes to allow 1.8 to compile on Mac OS X Lion (10.7)
* Makefile workaround for 10.6 extended to work on 10.7 and later.
* Now uses the 'weak' symbol for Lion systems, which no longer support
'weak_import'
Closes ASTERISK-17612.
Closes ASTERISK-18213.
Tested by: tilghman, oej.
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@336735 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/10
................
r336307 | jrose | 2011-09-16 16:09:20 -0500 (Fri, 16 Sep 2011) | 20 lines
Merged revisions 336294 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r336294 | jrose | 2011-09-16 14:53:40 -0500 (Fri, 16 Sep 2011) | 13 lines
Fix bad RTP media bridges in directmedia calls on peers separated by multiple Asterisk nodes.
In a situation involving devices on separate Asterisk trunks, the remote RTP bridge would
break when starting a call with directmedia. This patch queues a new type of control frame
so that our RTP bridge loop can properly detect when these situations occur and check to see
if peers need to be updated in order to send their media to the proper location.
(Closes issue ASTERISK-18340)
Reported by: Thomas Arimont
(Closes issue ASTERISK-17725)
Reported by: kwk
Tested by: twilson, jrose
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@336311 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/10
................
r335510 | russell | 2011-09-13 02:24:34 -0500 (Tue, 13 Sep 2011) | 22 lines
Merged revisions 335497 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r335497 | russell | 2011-09-13 02:11:36 -0500 (Tue, 13 Sep 2011) | 15 lines
Fix a crash in res_ais.
This patch resolves a crash observed in a load testing environment that
involved the use of the res_ais module. I observed some crashes where
the event delivery callback would get called, but the length parameter
incidcating how much data there was to read was 0. The code assumed
(with good reason I would think) that if this callback got called, there
was an event available to read. However, if the rare case that there's
nothing there, catch it and return instead of blowing up.
More specifically, the change always ensure that the size of the received
event in the cluster is always big enough to be a real ast_event.
Review: https://reviewboard.asterisk.org/r/1423/
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@335511 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/10
................
r335078 | mjordan | 2011-09-09 11:27:01 -0500 (Fri, 09 Sep 2011) | 29 lines
Merged revisions 335064 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r335064 | mjordan | 2011-09-09 11:09:09 -0500 (Fri, 09 Sep 2011) | 23 lines
Updated SIP 484 handling; added Incomplete control frame
When a SIP phone uses the dial application and receives a 484 Address
Incomplete response, if overlapped dialing is enabled for SIP, then
the 484 Address Incomplete is forwarded back to the SIP phone and the
HANGUPCAUSE channel variable is set to 28. Previously, the Incomplete
application dialplan logic was automatically triggered; now, explicit
dialplan usage of the application is required.
Additionally, this patch adds a new AST_CONTOL_FRAME type called
AST_CONTROL_INCOMPLETE. If a channel driver receives this control frame,
it is an indication that the dialplan expects more digits back from the
device. If the device supports overlap dialing it should attempt to
notify the device that the dialplan is waiting for more digits; otherwise,
it can handle the frame in a manner appropriate to the channel driver.
(closes issue ASTERISK-17288)
Reported by: Mikael Carlsson
Tested by: Matthew Jordan
Review: https://reviewboard.asterisk.org/r/1416/
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@335079 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/10
................
r334954 | rmudgett | 2011-09-08 17:28:56 -0500 (Thu, 08 Sep 2011) | 17 lines
Merged revisions 334953 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r334953 | rmudgett | 2011-09-08 17:27:40 -0500 (Thu, 08 Sep 2011) | 10 lines
Fix crash with res_fax when MALLOC_DEBUG and "core stop gracefully" are used.
Asterisk crashes if MALLOC_DEBUG is enabled when res_fax tries to
unregister its logger level.
* Make ast_logger_unregister_level() use ast_free() instead of free().
When MALLOC_DEBUG is enabled, ast_free() does not degenerate into a call
to free(). Therefore, if you allocated memory with a form of ast_malloc
you must free it with ast_free.
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@334955 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/10
................
r334841 | rmudgett | 2011-09-07 14:33:38 -0500 (Wed, 07 Sep 2011) | 17 lines
Merged revisions 334840 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r334840 | rmudgett | 2011-09-07 14:31:44 -0500 (Wed, 07 Sep 2011) | 10 lines
Fix AMI action Park crash.
* Made AMI action Park not say anything to the parker channel (AMI header
Channel2) since the AMI action is a third party parking the call. (This
is a change in behavior that cannot be preserved without a lot of effort.)
* Made not play pbx-parkingfailed if the Park 's' option is used.
JIRA AST-660
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@334842 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This permits the list of codecs to be specified in one configuration line,
instead of two or more, generally with the aim of either allowing all codecs
with the exception of a few or disallowing most but permitting a few.
Review: https://reviewboard.asterisk.org/r/1411/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@334574 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/10
................
r334297 | rmudgett | 2011-09-02 12:15:08 -0500 (Fri, 02 Sep 2011) | 46 lines
Merged revisions 334296 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r334296 | rmudgett | 2011-09-02 12:10:58 -0500 (Fri, 02 Sep 2011) | 39 lines
Fix potential memory allocation failure crashes in config.c.
* Added required checks to the returned memory allocation pointers to
prevent crashes.
* Made ast_include_rename() create a replacement ast_variable list node if
the new filename is longer than the available space. Fixes potential
crash and memory leak.
* Factored out ast_variable_move() from ast_variable_update() so
ast_include_rename() can also use it when creating a replacement
ast_variable list node.
* Made the filename stuffed at the end of the struct a minimum allocated
size in ast_variable_new() in case ast_include_rename() changes the stored
filename.
* Constify struct char pointers pointing to strings stuffed at the end of
the struct for: ast_variable, cache_file_mtime, and ast_config_map.
* Factored out cfmtime_new() to remove inlined code and allow some struct
pointers to become const.
* Removed the list lock from struct cache_file_mtime that was never used.
* Added doxygen comments to several structure elements and better
documented what strings are stuffed at the struct end char array.
* Reworked ast_config_text_file_save() and set_fn() to handle allocation
failure of the include file scratch pad object tracking blank lines.
* Made ast_config_text_file_save() fn[] declared with PATH_MAX to ensure
it is long enough for any filename with path. Also reduced the number of
container fileset buckets from a rediculus 180,000 to 1023.
JIRA AST-618
Review: https://reviewboard.asterisk.org/r/1378/
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@334304 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/10
................
r334010 | rmudgett | 2011-08-31 10:23:11 -0500 (Wed, 31 Aug 2011) | 50 lines
Merged revisions 334009 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r334009 | rmudgett | 2011-08-31 10:20:31 -0500 (Wed, 31 Aug 2011) | 43 lines
Call pickup race leaves orphaned channels or crashes.
Multiple users attempting to pickup a call that has been forked to
multiple extensions either crashes or fails a masquerade with a "bad
things may happen" message.
This is the scenario that is causing all the grief:
1) Pickup target is selected
2) target is marked as being picked up in ast_do_pickup()
3) target is unlocked by ast_do_pickup()
4) app dial or queue gets a chance to hang up losing calls and calls
ast_hangup() on target
5) SINCE A MASQUERADE HAS NOT BEEN SETUP YET BY ast_do_pickup() with
ast_channel_masquerade(), ast_hangup() completes successfully and the
channel is no longer in the channels container.
6) ast_do_pickup() then calls ast_channel_masquerade() to schedule the
masquerade on the dead channel.
7) ast_do_pickup() then calls ast_do_masquerade() on the dead channel
8) bad things happen while doing the masquerade and in the process
ast_do_masquerade() puts the dead channel back into the channels container
9) The "orphaned" channel is visible in the channels list if a crash does
not happen.
This patch does the following:
* Made ast_hangup() set AST_FLAG_ZOMBIE on a successfully hung-up channel
and not release the channel lock until that has happened.
* Made __ast_channel_masquerade() not setup a masquerade if either channel
has AST_FLAG_ZOMBIE set.
* Fix chan_agent misuse of AST_FLAG_ZOMBIE since it would no longer work.
(closes issue ASTERISK-18222)
Reported by: Alec Davis
Tested by: rmudgett, Alec Davis, irroot, Karsten Wemheuer
(closes issue ASTERISK-18273)
Reported by: Karsten Wemheuer
Tested by: rmudgett, Alec Davis, irroot, Karsten Wemheuer
Review: https://reviewboard.asterisk.org/r/1400/
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@334011 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/10
................
r332761 | rmudgett | 2011-08-22 12:05:35 -0500 (Mon, 22 Aug 2011) | 22 lines
Merged revisions 332759 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r332759 | rmudgett | 2011-08-22 12:00:03 -0500 (Mon, 22 Aug 2011) | 15 lines
Memory leak reading realtime database variable list.
Calling ast_load_realtime() can leak the last list node if the read list
only contains empty variable value items.
* Fixed list filter loop in ast_load_realtime() to delete the list node
immediately instead of the next time through the loop. The next time
through the loop may not happen if the node to delete is the last in the
list.
(issue ASTERISK-18277)
(issue ASTERISK-18265)
Patches:
jira_asterisk_18265_v1.8_config.patch (license #5621) patch uploaded by rmudgett
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@332762 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch adds a CDR option to cdr.conf that will allow CDR files to log calls ending
with congestion in a way that is unique from other unanswered calls.
(closes issue ASTERISK-14842)
Reported by: Alec Davis
Patches:
cdr_congestion.diff.txt (License #5546) patch uploaded by Alec Davis
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@332760 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/10
................
r332560 | twilson | 2011-08-18 16:34:04 -0500 (Thu, 18 Aug 2011) | 12 lines
Merged revisions 332559 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r332559 | twilson | 2011-08-18 16:26:01 -0500 (Thu, 18 Aug 2011) | 5 lines
Fix possible error on stringification of IPv4-mapped addrs
The FreeBSD netsock2 test has been failing for a while. We were
pasing sa->len to getnameinfo instead of sa_tmp->len.
ASTERISK-18289
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@332561 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/10
................
r332101 | rmudgett | 2011-08-16 12:17:28 -0500 (Tue, 16 Aug 2011) | 140 lines
Merged revisions 332100 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r332100 | rmudgett | 2011-08-16 11:31:36 -0500 (Tue, 16 Aug 2011) | 133 lines
Fix multiple parking issues.
JIRA ASTERISK-17183
Multi-parkinglot directs calls to wrong parkinglot.
JIRA ASTERISK-17870
Cannot retrieve parked calls.
JIRA ASTERISK-17430
ParkedCall() with no extension should pickup first available call and does not.
JIRA AST-576
Issues with parking lots
* Removed searching for parking lots by extension. Parking lots can only
be found by the parking lot name since parking lot access extensions and
spaces are not guaranteed to be unique.
* Added parking_lot_name option to the Park and ParkedCall applications.
Updated documentation for Park and ParkedCall applications.
* Add parkext_exclusive configuration option to make parking entry
extensions specify which parking lot they access.
(closes issue ASTERISK-17183)
Reported by: David Cabrejos
Tested by: rmudgett, David Cabrejos
(closes issue ASTERISK-17870)
Reported by: Remi Quezada
(closes issue ASTERISK-17430)
Reported by: Philippe Lindheimer
JIRA ASTERISK-17452
Parking_offset not used
JIRA AST-624
'next' setting for findslot does nothing
* Reimplemented since findslot feature option broken by -r114655.
(closes issue ASTERISK-17452)
Reported by: David Woolley
Tested by: rmudgett
JIRA ASTERISK-15792
Dialplan continues execution after transfer to park.
This happens for DTMF attended transfer, DTMF blind transfer, and DTMF
one-touch-parking if the party initiating these features also initiated
the call.
* Fixed the return code from the affected builtin features when parking a
call.
(closes issue ASTERISK-15792)
Reported by: Mat Murdock
Tested by: rmudgett, twilson
JIRA AST-607
The courtesytone is not playing to the expected call when picking up a
parked call.
This is mostly a documentation problem. However, the option is not reset
to the default when features.conf is reloaded.
* Updated features.conf.sample documentation for courtesytone and
parkedplay options.
* Reset the parkedplay option to default when features.conf is reloaded.
JIRA AST-615
AMI Park action followed by features reload results in orphaned channels
in parking lot.
* Reloading features.conf will not touch parking lots that have calls
still parked in them. Reload again at a later time.
Misc additional fixes:
* Added unit test for parking lot dialplan usage checking.
* Made update connected line when a parked call is retrieved from a
parking lot.
* Made retrieved parked call stop ringing or MOH depending upon how the
call was waiting in the parking lot.
* Made CLI "features show" indicate if the parking lot is enabled for use.
* Added PARKINGDYNEXTEN channel variable to allow dynamic parking lots to
specify the parking lot access extension.
* Made AMI ParkedCalls action ParkedCall events have a Parkinglot header.
* Made AMI ParkedCalls action ParkedCallsComplete event have a Total
header.
* Fixed potential deadlock from AMI Park action holding channel locks
while calling masq_park_call().
* Fixed several places where ast_strdupa() were used inside of loops.
(Mostly fixed by refactoring the loop body into its own function.)
* Fixed copy_parkinglot() copying too much from the source parking lot.
Extracted the parking lot configuration settings into struct
parkinglot_cfg.
* Refactored courtesytone playing code to put the channel not playing the
tone in autoservice.
* Fix when pbx-parkingfailed is played that the other channel is put in
autoservice if it exists.
* Fixed parkinglot reference leak in parked_call_exec() error paths.
* Fixed parkinglot_unref() use of parkinglot after it was unreffed.
* Made destroy the struct ast_parkinglot parkings lock when done.
* Refactored the features.conf parking lot configuration code to eliminate
redundancy.
* Fixed feature reload to better protect parking lots.
* Fixed parking lot container reference leak in handle_parkedcalls().
* Fixed the total count in handle_parkedcalls().
Review: https://reviewboard.asterisk.org/r/1358/
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@332117 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/10
................
r331654 | kmoore | 2011-08-12 11:21:37 -0500 (Fri, 12 Aug 2011) | 19 lines
Merged revisions 331649 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r331649 | kmoore | 2011-08-12 11:20:25 -0500 (Fri, 12 Aug 2011) | 12 lines
Logger does not warn of failure to open logging channels
Currently, logger only prints an error message to stderr when it fails to open
a logger channel where many users will not see it because the logger lock is
held. The alternative provided by this patch is to log the error to all
attached consoles in the hopes that it will be easier to see. Additionally,
this patch prevents the failed logger channel from being added to the list
where it would silently fail on each call to the Asterisk logger.
(closes issue ASTERISK-16231)
Review: https://reviewboard.asterisk.org/r/1338
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@331657 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/10
................
r331462 | rmudgett | 2011-08-10 15:41:35 -0500 (Wed, 10 Aug 2011) | 37 lines
Merged revisions 331461 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r331461 | rmudgett | 2011-08-10 15:29:59 -0500 (Wed, 10 Aug 2011) | 30 lines
Output of queue log not started until logger reloaded.
ASTERISK-15863 caused a regression with queue logging. The output of the
queue log is not started until the logger configuration is reloaded.
* Queue log initialization is completely delayed until the first message
is posted to the queue log system. Including the initial opening of the
queue log file.
* Fixed rotate_file() ROTATE strategy to give the file just rotated out to
the configured exec function after rotate. Just like the other strategies.
* Fixed logger reload to always post the queue reload entry instead of
just if there is a queue log file.
* Refactored some code to eliminate some redundancy and to reduce stack
utilization.
(closes issue ASTERISK-17036)
JIRA SWP-2952
Reported by: Juan Carlos Valero
Patches:
jira_asterisk_17036_v1.8.patch (license #5621) patch uploaded by rmudgett
Tested by: rmudgett
(closes issue ASTERISK-18208)
Reported by: Christian Pinedo
Review: https://reviewboard.asterisk.org/r/1333/
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@331463 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/10
................
r331316 | kmoore | 2011-08-10 08:48:41 -0500 (Wed, 10 Aug 2011) | 15 lines
Merged revisions 331315 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r331315 | kmoore | 2011-08-10 08:47:46 -0500 (Wed, 10 Aug 2011) | 8 lines
AMI action ModuleReload returns Error if Module: missing or empty
An empty string was not being checked for properly causing identification of
the module to be reloaded to fail and return an Error with message
"No such module."
(closes issue AST-616)
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@331317 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/10
................
r331265 | rmudgett | 2011-08-09 18:12:49 -0500 (Tue, 09 Aug 2011) | 22 lines
Merged revisions 331248 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r331248 | rmudgett | 2011-08-09 17:12:59 -0500 (Tue, 09 Aug 2011) | 15 lines
Misc minor items found in code.
* Add some reentrancy protection in pbx.c when creating the contexts_table
hash table.
* Fix inverted test in chan_sip.c conditional code.
* Fix uninitialized variable and use of the wrong variable in chan_iax2.c.
* Fix test of return value in app_parkandannounce.c. Explicitly testing
for -1 is bad if the function does not actually return that value when it
fails.
* Fixup some comments and add some curly braces in features.c.
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@331266 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The ENUM dialplan functions do not report DNS query errors properly. It is
useful to differentiate between failed query (e.g. non-existent domain) vs. no
data records of the appropriate type. This is required to make overlapped
dialing work.
(closes issue ASTERISK-13769)
Review: https://reviewboard.asterisk.org/r/1355/
Patch-by: Timo Teras
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@331201 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/10
........
r331041 | twilson | 2011-08-08 16:12:51 -0500 (Mon, 08 Aug 2011) | 6 lines
Replace AMI Unlink events with Bridge events
A previous update converted some of the Link and Unlink events to
Bridge events, but a couple of Unlink events were missed. This patch
rectifies the situation.
(closes issues ASTERISK-17455)
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@331042 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/10
................
r330763 | kmoore | 2011-08-03 10:15:26 -0500 (Wed, 03 Aug 2011) | 16 lines
Merged revisions 330762 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r330762 | kmoore | 2011-08-03 10:14:36 -0500 (Wed, 03 Aug 2011) | 9 lines
editing files in main/editline does not ensure rebuild of libedit.a
When editing a source file in main/editline, the build system does not rebuild
libedit.a and uses the already existing one instead. Adding a PHONY to
CHECK_SUBDIR fixes this problem.
(closes issue ASTERISK-16221)
Patch-by: Walter Doekes
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@330764 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/10
................
r330434 | kmoore | 2011-08-01 10:23:29 -0500 (Mon, 01 Aug 2011) | 16 lines
Merged revisions 330433 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r330433 | kmoore | 2011-08-01 10:22:10 -0500 (Mon, 01 Aug 2011) | 9 lines
Incorrect playback for Spanish in some circumstances
When you say the time in spanish and it is 01:00 - 01:59 or 13:00 - 13:59 you
must use female pronunciation "1F". The function "say_date_with_format_es" does
not take this in account.
(closes ASTERISK-15016)
Patch-by: Luis Jimenez
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@330435 65c4cc65-6c06-0410-ace0-fbb531ad65f3
There is a fairly common pattern making its way through the code base where we
put a temporary object on the stack so we can call ao2_find() with OBJ_POINTER.
The purpose is so that it can be passed into the object hash function.
However, this really seems like a hack and potentially error prone. This patch
is a first stab at approach to avoid having to do that.
It adds a new flag, OBJ_KEY, which can be used instead of OBJ_POINTER in these
situations. Then, the hash function can know whether it was given an object or
some custom data to hash.
The patch also changes some uses of ao2_find() for iax2_user and iax2_peer
objects to reflect how OBJ_KEY would be used.
So long, and thanks for all the fish.
Review: https://reviewboard.asterisk.org/r/1184/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@330273 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/10
................
r329528 | jrose | 2011-07-26 08:52:34 -0500 (Tue, 26 Jul 2011) | 24 lines
Merged revisions 329527 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r329527 | jrose | 2011-07-26 08:25:35 -0500 (Tue, 26 Jul 2011) | 17 lines
Fixes some voicemail forwarding behavior based around prepend mode.
Formerly, prepend forwarding would have the user record a message with no useful prompt
and an expectation for the user to push a button on the phone when finished recording.
If a length of silence was detected instead, the recording would be canceled and the user
would re-enter the voicemail forwarding menu. Subsequent time-outs in prepend recording
would also bug out in the sense that they would write over the original message and get
sent to the recipient regardless of whether they timed out or were accepted. This patch
fixes this issue and adds a prompt which will be played after a timeout informing the
user that they needed to press a button. Currently, the sound files that we have are
somewhat inadquate for this, so after the call we simply have Allison say "Please try
again. Then press pound." which actually relies on two separate sound files. Just one
would be more appropriate.
reporter: Vlad Povorozniuc
Review: https://reviewboard.asterisk.org/r/1327/
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@329530 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/10
................
r329331 | rmudgett | 2011-07-22 15:43:07 -0500 (Fri, 22 Jul 2011) | 55 lines
Merged revisions 329299 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r329299 | rmudgett | 2011-07-22 10:44:58 -0500 (Fri, 22 Jul 2011) | 48 lines
Deadlocks dealing with dialplan hints during reload.
There are two remaining different deadlocks reported dealing with dialplan
hints.
The deadlock in ASTERISK-17666 is caused by invalid locking order in
ast_remove_hint(). The hints container must be locked before the hint
object.
The deadlock in ASTERISK-17760 is caused by a catch-22 situation in
handle_statechange(). The deadlock is caused by not having the conlock
before calling the watcher callbacks. Unfortunately, having that lock
causes a different deadlock as reported in ASTERISK-16961.
* Fixed ast_remove_hint() locking order.
* Made handle_statechange() no longer call the watcher callbacks holding
any locks that matter.
* Made hint ao2 destructor do the watcher callbacks for extension
deactivation to guarantee that they get called.
* Fixed hint reference leak in ast_add_hint() if the callback container
constructor failed.
* Fixed hint reference leak in complete_core_show_hint() for every hint it
found for CLI tab completion.
* Adjusted locking in ast_merge_contexts_and_delete() for safety.
* Added context_merge_lock to prevent ast_merge_contexts_and_delete() and
handle_statechange() from interfering with each other.
* Fixed ast_change_hint() not taking into account that the extension is
used for the hash key.
(closes issue ASTERISK-17666)
Reported by: irroot
Tested by: irroot
JIRA SWP-3318
(closes issue ASTERISK-17760)
Reported by: Byron Clark
Tested by: irroot
JIRA SWP-3393
Review: https://reviewboard.asterisk.org/r/1313/
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@329332 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.10
................
r328824 | kmoore | 2011-07-19 13:05:21 -0500 (Tue, 19 Jul 2011) | 18 lines
Merged revisions 328823 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r328823 | kmoore | 2011-07-19 12:57:18 -0500 (Tue, 19 Jul 2011) | 11 lines
RTP bridge away with inband DTMF and feature detection
When deciding whether Asterisk was allowed to bridge the call away from the
core, chan_sip did not take into account the usage of features on dialed
channels that require monitoring of DTMF on channels utilizing inband DTMF.
This would cause Asterisk to allow the call to be locally or remotely bridged,
preventing access to the data required to detect activations of such features.
(closes 17237)
Review: https://reviewboard.asterisk.org/r/1302/
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@328825 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r327950 | kpfleming | 2011-07-12 17:53:53 -0500 (Tue, 12 Jul 2011) | 14 lines
Correct double-free situation in manager output processing.
The process_output() function calls ast_str_append() and xml_translate() on its
'out' parameter, which is a pointer to an ast_str buffer. If either of these
functions need to reallocate the ast_str so it will have more space, they will
free the existing buffer and allocate a new one, returning the address of the
new one. However, because process_output only receives a pointer to the ast_str,
not a pointer to its caller's variable holding the pointer, if the original
ast_str is freed, the caller will not know, and will continue to use it (and
later attempt to free it).
(reported by jkroon on #asterisk-dev)
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@327953 65c4cc65-6c06-0410-ace0-fbb531ad65f3
follow_talker mode originally echoed the same video stream
to all participants. As the primary talker switched around, the
video stream would result in the talker seeing themselves. Now
the primary talker sees the last person who was talking rather than
themselves.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@327640 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r327106 | mnicholson | 2011-07-08 14:52:51 -0500 (Fri, 08 Jul 2011) | 11 lines
Reset our ast_str before passing it on to dialplan function backends.
It is possible for a dialplan backend to not modify the given buffer or ast_str
and still return success. This causes any previous value stored in the buffer
to be used as if the new function call provided it. Some functions also append
to the given buffer assuming it is empty.
The test_substitution unit test has also been modified to detect this problem.
(closes issue ASTERISK-17878)
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@327107 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r326985 | rmudgett | 2011-07-07 20:08:05 -0500 (Thu, 07 Jul 2011) | 12 lines
Some code cleanup in pbx.c
* Mostly comment and format changes.
* ast_context_remove_extension_callerid() and ast_add_extension_nolock()
will write lock the found specific context.
* ast_context_find() will now tolerate a NULL name.
* Eliminated some inlined versions of find_context() and
find_context_locked().
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@327000 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch adds pass-through support for CELT. CELT
formats are defined in codecs.conf and can be configured
to any sample rate a CELT endpoint supports. This patch also
addresses a crash in channel.c resulting from a frame list being
freed incorrectly. This crash was discovered while testing a CELT
translator which had to split encoded audio into multiple frames.
The codec translator is not a part of this patch, but may be
contributed in the future.
Review: https://reviewboard.asterisk.org/r/1294/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@326855 65c4cc65-6c06-0410-ace0-fbb531ad65f3
There were some bugs in the very ancient version of Berkeley DB that Asterisk
used. Instead of spending the time tracking down the bugs in the Berkeley code
we move to the much better documented SQLite 3.
Conversion of the old astdb happens at runtime by running the included
astdb2sqlite3 utility. The ast_db API with SQLite 3 backend should behave
identically to the old Berkeley backend, but in the future we could offer a
much more robust interface.
We do not include the SQLite 3 library in the source tree, but instead rely
upon the distribution-provided libraries. SQLite is so ubiquitous that this
should not place undue burden on administrators.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@326589 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This adds a new action, FilterAdd to the manager interface that allows control over event filters for the current session
(closes issue ASTERISK-16795)
Reported by: kobaz
Tested by: kobaz,loloski
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@326267 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r326209 | mjordan | 2011-07-05 08:23:57 -0500 (Tue, 05 Jul 2011) | 7 lines
Updated filestream destructor to block until move is complete when cache is used
When a cache directory is used, the process is forked and a mv command is executed to move the temporary file to the permanent location. This caused issues with voicemail, where a race condition occurred when the parent expected the file to be in the permanent location prior to the mv command completing. The parent process is now blocked until the mv command completes.
(closes issue ASTERISK-17724)
Reported by: Adiren P.
Tested by: mjordan
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@326210 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r324955 | tilghman | 2011-06-27 11:30:50 -0500 (Mon, 27 Jun 2011) | 5 lines
Save and restore errno from within signal handlers.
This is recommended by the POSIX standard, as well as by the sigaction(2) manpage
for various platforms that we support (e.g. Mac OS X).
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@324961 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r324484 | twilson | 2011-06-22 13:52:04 -0500 (Wed, 22 Jun 2011) | 20 lines
Stop sending IPv6 link-local scope-ids in SIP messages
The idea behind the patch listed below was used, but in a more targeted manner.
There are now address stringification functions for addresses that are meant to
be sent to a remote party. Link-local scope-ids only make sense on the machine
from which they originate and so are stripped in the new functions.
There is also a host sanitization function added to chan_sip which is used
for when peer and dialog tohost fields or sip_registry hostnames are used to
craft a SIP message.
Also added are some basic unit tests for netsock2 address parsing.
(closes issue ASTERISK-17711)
Reported by: ch_djalel
Patches:
asterisk-1.8.3.2-ipv6_ll_scope.patch uploaded by ch_djalel (license 1251)
Review: https://reviewboard.asterisk.org/r/1278/
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@324487 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r324364 | dvossel | 2011-06-21 15:11:52 -0500 (Tue, 21 Jun 2011) | 10 lines
Fixes locking inversion issue in ast_async_goto()
During this function we can not hold the "chan" lock while
doing the masquerade, the explicit goto on the tmp chan, or
the channel alloc. Instead we need to get the channel lock,
store off information about the channel that we need, and
then let the channel lock go for the remainder of the function.
Review: https://reviewboard.asterisk.org/r/1275/
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@324365 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
................
r323754 | twilson | 2011-06-15 13:21:52 -0500 (Wed, 15 Jun 2011) | 23 lines
Merged revisions 323733 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
................
r323733 | twilson | 2011-06-15 13:13:00 -0500 (Wed, 15 Jun 2011) | 16 lines
Merged revisions 323732 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r323732 | twilson | 2011-06-15 13:06:24 -0500 (Wed, 15 Jun 2011) | 9 lines
Fix DYNAMIC_FEATURES
DYNAMIC_FEATURES were broken by a recent DTMF change. This patch makes
sure that dynamic features are also checked when deciding whether or not
to pass DTMF through or store it for interpreting.
(closes issue ASTERISK-17914)
Reported by: vrban
........
................
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@323760 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r323669 | rmudgett | 2011-06-15 11:43:18 -0500 (Wed, 15 Jun 2011) | 21 lines
[regression] Voicemail MWI is no longer sent.
When leaving a voicemail, the MWI message is never sent. The same thing
happens when checking a voicemail and marking it as read.
If you restart Asterisk, everything comes up at that state correctly, but
changes to the messages in voicemail causes the light to not be set
appropriately. Very easy to reproduce.
* Made ast_event_check_subscriber() return TRUE if there are ANY
subscribers to an event type when there are no restricting ie values
passed. This allows an event being queued to be queued.
(closes issue ASTERISK-18002)
Reported by: lmadsen
Tested by: lmadsen, irroot
Patches:
jira_asterisk_18002_v1.8.patch uploaded by rmudgett (License #5621)
(closes issue ASTERISK-18019)
........
r323670 | rmudgett | 2011-06-15 11:43:31 -0500 (Wed, 15 Jun 2011) | 7 lines
Add a test to the event unit tests to catch ASTERISK-18002.
The new tests check to see if there are ANY subscribers to the event type
when ast_event_check_subscriber() is not passed any specific ie values.
(issue ASTERISK-18002)
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@323671 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
................
r323608 | seanbright | 2011-06-15 11:31:53 -0400 (Wed, 15 Jun 2011) | 39 lines
Merged revisions 323579 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
................
r323579 | seanbright | 2011-06-15 11:22:50 -0400 (Wed, 15 Jun 2011) | 32 lines
Merged revisions 323559 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r323559 | seanbright | 2011-06-15 11:15:30 -0400 (Wed, 15 Jun 2011) | 25 lines
Resolve a segfault/bus error when we try to map memory that falls on a page
boundary.
The fix for ASTERISK-15359 was incorrect in that it added 1 to the length of the
mmap'd region. The problem with this is that reading/writing to that extra byte
outside of the bounds of the underlying fd causes a bus error.
The real issue is that we are working with both a FILE * and the raw fd
underneath it and not synchronizing between them. The code that was removed in
ASTERISK-15359 was correct, but we weren't flushing the FILE * before mapping
the fd.
Looking at the manager code in 1.4 reveals that the FILE * in 'struct
mansession' is never used except to create a temporary file that we immediately
fdopen. This means we just need to write a 0 byte to the fd and everything will
just work. The other branches require a call to fflush() which, while not a
guaranteed fix, should reduce the likelihood of a crash.
This all makes sense in my head.
(closes issue ASTERISK-16460)
Reported by: Ravelomanantsoa Hoby (hoby)
Patches:
issue17747_1.4_svn_markII.patch uploaded by Sean Bright (license #5060)
........
................
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@323609 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r322981 | twilson | 2011-06-10 08:29:00 -0700 (Fri, 10 Jun 2011) | 11 lines
Avoid a DB1 infinite loop bug
Explicity check the last entry in the DB and make sure that we don't iterate
past it. Since there can be no duplicates, this just makes sure that we stop
after matching the last key.
This patch also refactors the code to get away from some code duplication. A
previous patch added many astdb tests and this patch passed them.
Review: https://reviewboard.asterisk.org/r/1259/
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@322982 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r322749 | rmudgett | 2011-06-09 11:31:53 -0500 (Thu, 09 Jun 2011) | 15 lines
Remove potential deadlock in call pickup race.
Deadlock is possible in ast_do_pickup() when holding the target channel
lock and trying to get the chan channel lock. Also, holding the target
lock when calling ast_channel_masquerade() is not a good idea because that
routine does deadlock avoidance.
* Removed the need to hold the target lock after marking the target with a
datastore and getting the connected line data off of the target channel.
* Moved can_pickup() to ast_can_pickup() in features.c. Now all the call
pickup methods use the same basic call pickup availability check.
Review: https://reviewboard.asterisk.org/r/1234/
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@322750 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r322425 | rmudgett | 2011-06-08 13:46:30 -0500 (Wed, 08 Jun 2011) | 16 lines
SRV lookup attempted for SIP peers listed as an IP address.
Asterisk attempts to SRV lookup a host name even if the host name is an IP
address. Regression introduced when IPv6 support was added.
* Restored the check in ast_dnsmgr_lookup() to see if the given host name
is an IP address. The IP address could be in either IPv4 or IPv6 formats.
(closes issue ASTERISK-17815)
Reported by: Byron Clark
Tested by: Byron Clark, Richard Mudgett
Patches:
issue19248_v1.8.patch - uploaded by Richard Mudgett (License #5621)
Review: https://reviewboard.asterisk.org/r/1240/
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@322426 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r321924 | rmudgett | 2011-06-03 16:49:17 -0500 (Fri, 03 Jun 2011) | 5 lines
Be more explicit for CCSS generic device state event subscription.
Make CCSS generic device state event subscription specify the
AST_EVENT_IE_STATE ie exists to be safe.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@321925 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r321871 | rmudgett | 2011-06-03 15:58:13 -0500 (Fri, 03 Jun 2011) | 27 lines
Event subscription fixes.
Must commit the subscription fixes together with the integration
subscription tests. The subscription fixes cause an erroneously passing
test to fail. The new subscription tests detect errors without the
subscription fixes.
* Added missing event_names[] table entry.
* Reworked ast_event_check_subscriber()/match_sub_ie_val_to_event() to
correctly detect if a subscriber exists for the proposed event.
* Made match_ie_val() and match_sub_ie_val_to_event() check the buffer
length for RAW payload types.
* Fixed error handling memory leak in ast_event_sub_activate(),
ast_event_unsubscribe(), and ast_event_queue().
* Made ast_event_new() and ast_event_check_subscriber() better protect
themselves from an invalid payload type.
* Added container lock protection between removing old cache events and
adding the new cached event in
ast_event_queue_and_cache()/event_update_cache().
* Added new event subscription tests.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@321872 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Asterisk now has protocol independent support for processing text messages
outside of a call. Messages are routed through the Asterisk dialplan.
SIP MESSAGE and XMPP are currently supported. There are options in sip.conf
and jabber.conf that enable these features.
There is a new application, MessageSend(). There are two new functions,
MESSAGE() and MESSAGE_DATA(). Documentation will be available on
the project wiki, wiki.asterisk.org.
Thanks to Terry Wilson for the assistance with development and to David Vossel
for helping with some additional testing.
Review: https://reviewboard.asterisk.org/r/1042/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@321546 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r321392 | rmudgett | 2011-05-27 18:45:41 -0500 (Fri, 27 May 2011) | 12 lines
Crash when using hagi and no servers are available.
When none of the servers returned by the SRV querey respond, asterisk
crashes. The problem is that if the loop over all the SRV entries
finishes then the srv_context has already been cleaned up.
* Make ast_srv_cleanup() check to see if the context is already cleaned
up.
(closes issue #19256)
Reported by: byronclark
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@321393 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r321211 | alecdavis | 2011-05-27 20:31:15 +1200 (Fri, 27 May 2011) | 16 lines
Fix *8 directed pickup locks system during pickupsound play out
move playout from sip_pickup_thread to bridge using BRIDGE_PLAY_SOUND method,
This stop the clash of 2 threads trying to write audio to same channel.
In addition fixes choppy audio beep in issue 19177.
(issue #18654)
(issue #19177)
Reported by: Docent
Patches:
review1232-1.8.diff.txt alecdavis (license 585)
Tested by: alecdavis
Review: https://reviewboard.asterisk.org/r/1232/
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@321212 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r321100 | markm | 2011-05-26 16:09:35 -0400 (Thu, 26 May 2011) | 11 lines
ast_sockaddr_resolve() in netsock2.c may deref a null pointer
Added a null check in netsock2 ast_sockaddr_resolve() as well as added default initalizers in chan_sip parse_uri_legacy_check() to make sure that invalid uris will make null (and not undefined) user,pass,domain,transport variables
(closes issue #19346)
Reported by: kobaz
Patches:
netsock2.patch uploaded by kobaz (license 834)
Tested by: kobaz, Marquis
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@321101 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r321042 | twilson | 2011-05-26 10:29:54 -0700 (Thu, 26 May 2011) | 6 lines
Initialize stack-allocated ast_sockaddrs before use
It is important to always initialize ast_sockaddrs before use--even if they
are passed to ast_sockaddr_copy as the underlying storage could be bigger
than what ends up being copied--leaving part of the data unitialized.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@321043 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The ast_string_field_build_va functions were written to take to separate
va_lists to work around FreeBSD 4 not having va_copy defined.
In the end, we don't support anything using gcc < 3 anyway because we use
va_copy all over the place anyway. This patch just simplifies things by
removing the second va_list function arguments in favor of va_copy.
Review: https://reviewboard.asterisk.org/r/1233/
--This line, and those below, will be ignored--
M include/asterisk/stringfields.h
M main/utils.c
M main/channel.c
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@320946 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r320823 | rmudgett | 2011-05-25 12:06:38 -0500 (Wed, 25 May 2011) | 18 lines
The AMI Newstate event contains different information between v1.4 and v1.8.
The addition of connected line support in v1.8 changes the behavior of the
channel caller ID somewhat. The channel caller ID value no longer time
shares with the connected line ID on outgoing call legs. The timing of
some AMI events/responses output the connected line ID as caller ID.
These party ID's are now separate.
* The ConnectedLineNum and ConnectedLineName headers were added to many
AMI events/responses if the CallerIDNum/CallerIDName headers were also
present.
(closes issue #18252)
Reported by: gje
Tested by: rmudgett
Review: https://reviewboard.asterisk.org/r/1227/
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@320825 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r320796 | rmudgett | 2011-05-25 11:23:11 -0500 (Wed, 25 May 2011) | 17 lines
Give zombies a safe channel driver to use.
Recent crashes from zombie channels suggests that they need a safe home to
goto. When a masquerade happens, the physical part of the zombie channel
is hungup. The hangup normally sets the channel private pointer to NULL.
If someone then blindly does a callback to the channel driver, a crash is
likely because the private pointer is NULL.
The masquerade now sets the channel technology of zombie channels to the
kill channel driver.
Related to the following issues:
(issue #19116)
(issue #19310)
Review: https://reviewboard.asterisk.org/r/1224/
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@320820 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r320650 | rmudgett | 2011-05-23 12:53:44 -0500 (Mon, 23 May 2011) | 16 lines
Add ConnectedLineNum/Name headers to output of AMI action Status.
* Add ConnectedLineNum and ConnectedLineName headers to the output of the
AMI action Status. This makes it easier to find out who the channel is
connected to without having to lookup BridgedChannel or when they are
connected to an application (e.g.: VoiceMail) which has no bridged
channel.
* Bridged channels with no CallerID had "" instead of "<unknown>" output,
that might be a bug as "<unknown>" was what older versions used.
(closes issue #18158)
Reported by: gareth
Patches:
svn-292308.diff uploaded by gareth (license 208)
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@320651 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r320057 | rmudgett | 2011-05-20 11:43:02 -0500 (Fri, 20 May 2011) | 19 lines
Crash while transferring a call during DTMF feature timeout.
When a call is being attended transferred during the time between
AST_FRAME_DTMF_BEGIN and AST_FRAME_DTMF_END, the transferred channel
becomes a zombie (so tech data is not available), making ast_dtmf_stream()
segfault when it tries to send the DTMF digit (at least with SIP
channels).
Patch based on feature-end-zombie.patch uploaded by Irontec (license 1256)
* Check for zombies when ast_channel_bridge() returns.
* Guarantee that the fo parameter value is initialized in
ast_channel_bridge() before any returns.
(closes issue #19116)
Reported by: Irontec
Tested by: rmudgett
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@320058 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r319997 | rmudgett | 2011-05-20 10:48:25 -0500 (Fri, 20 May 2011) | 25 lines
Crash when using directed pickup applications.
The directed pickup applications can cause a crash if the pickup was
successful because the dialplan keeps executing.
This patch does the following:
* Completes the channel masquerade on a successful pickup before the
application returns. The channel is now guaranteed a zombie and must not
continue executing the dialplan.
* Changes the return value of the directed pickup applications to return
zero if the pickup failed and nonzero(-1) if the pickup succeeded.
* Made some code optimizations that no longer require re-checking the
pickup channel to see if it is still available to pickup.
(closes issue #19310)
Reported by: remiq
Patches:
issue19310_v1.8_v2.patch uploaded by rmudgett (license 664)
Tested by: alecdavis, remiq, rmudgett
Review: https://reviewboard.asterisk.org/r/1221/
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@319998 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r319758 | rmudgett | 2011-05-19 11:50:48 -0500 (Thu, 19 May 2011) | 21 lines
CCSS generic agent with POTS and ISDN phones fail caller busy call-back test.
If the following is true after a CCSS activation:
* The generic agent is for an analog phone or ISDN phone. (Caller party)
* The called party becomes available.
* The caller party is not available.
When the caller party becomes available, the caller is not alerted to the
called party being available. The generic agent still thinks the caller
is busy.
* Fixed the generic agent device state event subscription to look for all
device states that are considered available.
* Encapsulated the device state test for CCSS generic device available in
cc_generic_is_device_available(). Made the generic agent and monitor use
the new function instead of the manually coded inline equivalent.
JIRA AST-559
JIRA SWP-3462
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@319759 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r319259 | rmudgett | 2011-05-16 15:33:37 -0500 (Mon, 16 May 2011) | 13 lines
Deadlock between generic CCSS agent and native ISDN CCSS.
Deadlock can occur when the generic CCSS agent is deleting duplicate CC
offers and the native ISDN CC driver is processing an incoming CC message.
The cc_core_instances container lock cannot be held when an agent or
monitor callback is invoked without the possibility of a deadlock.
* Make kill_duplicate_offers() remove the reference in cc_core_instances
outside of the container lock.
JIRA AST-566
JIRA SWP-3469
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@319260 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r318868 | rmudgett | 2011-05-13 11:28:26 -0500 (Fri, 13 May 2011) | 19 lines
CDR's are being written immediately on caller hangup.
CDR's are being written immediately on caller hangup. The dialplan is not
able to modify it in the h exten. The h exten in the initial context is
not run before closing CDR's when the bridge is unlinked if a macro is
active and does not have an h exten.
* Make ast_bridge_call() check for an h exten in the current context and
if a macro is active then the initial context. The first h exten found is
then run before closing the CDR.
(closes issue #18212)
Reported by: leearcher
Patches:
issue18212_v1.8.patch uploaded by rmudgett (license 664)
Tested by: rmudgett
Review: https://reviewboard.asterisk.org/r/1206/
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@318869 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r318671 | alecdavis | 2011-05-13 10:52:08 +1200 (Fri, 13 May 2011) | 30 lines
Fix directed group pickup feature code *8 with pickupsounds enabled
Since 1.6.2, the new pickupsound and pickupfailsound in features.conf cause many issues.
1). chan_sip:handle_request_invite() shouldn't be playing out the fail/success audio, as it has 'netlock' locked.
2). dialplan applications for directed_pickups shouldn't beep.
3). feature code for directed pickup should beep on success/failure if configured.
Created a sip_pickup() thread to handle the pickup and playout the audio, spawned from handle_request_invite.
Moved app_directed:pickup_do() to features:ast_do_pickup().
Functions below, all now use the new ast_do_pickup()
app_directed_pickup.c:
pickup_by_channel()
pickup_by_exten()
pickup_by_mark()
pickup_by_part()
features.c:
ast_pickup_call()
(closes issue #18654)
Reported by: Docent
Patches:
ast_do_pickup_1.8_trunk.diff.txt uploaded by alecdavis (license 585)
Tested by: lmadsen, francesco_r, amilcar, isis242, alecdavis, irroot, rymkus, loloski, rmudgett
Review: https://reviewboard.asterisk.org/r/1185/
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@318672 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r318282 | rmudgett | 2011-05-09 14:07:01 -0500 (Mon, 09 May 2011) | 24 lines
Hangup extension executed twice.
When a user hangs up a call, in certain circumstances, the hangup
extension can end up being executed twice:
1) If a call is bridged and the 'h' extension executes the Hangup
application, then the 'h' extension will be executed twice.
2) If a call is bridged within a macro (Dial or Queue), it has its own 'h'
extension, the main context also has an 'h' extension, and the macro 'h'
extension executes the Hangup application, then both 'h' extensions will
be executed.
* Revert originally commited fix for #16106 and just set
AST_FLAG_BRIDGE_HANGUP_RUN unconditionally in ast_bridge_call(). The
bridge code just executed an 'h' extension so the main PBX loop does not
need to execute one as well.
(issue #16106)
Reported by: ajohnson
(issue #16548)
Reported by: hajekd
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@318283 65c4cc65-6c06-0410-ace0-fbb531ad65f3