This removes references that are no longer needed due to automatic
references created by module dependencies.
In addition this removes most calls to ast_module_check as they were
checking modules which are listed as dependencies.
Change-Id: I332a6e8383d4c72c8e89d988a184ab8320c4872e
* Declare 'requires' and 'enhances' text fields on module info structure.
* Rename 'nonoptreq' to 'optional_modules'.
* Update doxygen comments.
Still need to investigate dependencies among modules I cannot compile.
Change-Id: I3ad9547a0a6442409ff4e352a6d897bef2cc04bf
In 2dee95cc (ASTERISK-27024) and 776ffd77 (ASTERISK-26879) there was
confusion about whether the transport_state->localnet ACL has ALLOW or
DENY semantics.
For the record: the localnet has DENY semantics, meaning that "not in
the list" means ALLOW, and the local nets are in the list.
Therefore, checks like this look wrong, but are right:
/* See if where we are sending this request is local or not, and if
not that we can get a Contact URI to modify */
if (ast_apply_ha(transport_state->localnet, &addr) != AST_SENSE_ALLOW) {
ast_debug(5, "Request is being sent to local address, "
"skipping NAT manipulation\n");
(In the list == localnet == DENY == skip NAT manipulation.)
And conversely, other checks that looked right, were wrong.
This change adds two macro's to reduce the confusion and uses those
instead:
ast_sip_transport_is_nonlocal(transport_state, addr)
ast_sip_transport_is_local(transport_state, addr)
ASTERISK-27248 #close
Change-Id: Ie7767519eb5a822c4848e531a53c0fd054fae934
The "external_media_address" option on transports is now
resolved using dnsmgr. This allows it to be automatically
refreshed regularly if refreshes are enabled in dnsmgr.
If the system is using a dynamic IP address a dynamic DNS
hostname can be provided to keep the IP address up to
date.
Change-Id: Ia54771720dff0105bde55d5bbb81a3ba437e05b2
In all non-pbx modules, AST_MODULE_LOAD_FAILURE has been changed
to AST_MODULE_LOAD_DECLINE. This prevents asterisk from exiting
if a module can't be loaded. If the user wishes to retain the
FAILURE behavior for a specific module, they can use the "require"
or "preload-require" keyword in modules.conf.
A new API was added to logger: ast_is_logger_initialized(). This
allows asterisk.c/check_init() to print to the error log once the
logger subsystem is ready instead of just to stdout. If something
does fail before the logger is initialized, we now print to stderr
instead of stdout.
Change-Id: I5f4b50623d9b5a6cb7c5624a8c5c1274c13b2b25
If local_net is not defined on a transport, transport_state->localnet
will be NULL. ast_apply_ha will, be default, return AST_SENSE_ALLOW in
this case, causing the external_media_address, if set, to be skipped.
This patch causes us to only check if we are sending within a network if
local_net is defined.
ASTERISK-26879 #close
Change-Id: Ib661c31a954cabc9c99f1f25c9c9a5c5b82cbbfb
According to the RFC[1] WSS should only be used in the Via header
for secure Websockets.
* Use WSS in Via for secure transport.
* Only register one transport with the WS name because it would be
ambiguous. Outgoing requests may try to find the transport by name and
pjproject only finds the first one registered. This may mess up unsecure
websockets but the impact should be minimal. Firefox and Chrome do not
support anything other than secure websockets anymore.
* Added and updated some debug messages concerning websockets.
* security_events.c: Relax case restriction when determining security
transport type.
* The res_pjsip_nat module has been updated to not touch the transport
on Websocket originating messages.
[1] https://tools.ietf.org/html/rfc7118
ASTERISK-26796 #close
Change-Id: Ie3a0fb1a41101a4c1e49d875a8aa87b189e7ab12
Attempting to load a transport from realtime was forcing asterisk into an
infinite recursion loop. The first thing transport_apply did was to do a
sorcery retrieve by id for an existing transport of the same name. For files,
this just returns the previous object from res_sorcery_config's internal
container, if any. For realtime, the res_sourcery_realtime driver looks in the
database and finds the existing row but now it has to rehydrate it into a
sorcery object which means calling... transport_apply. And so it goes.
The main issue with loading from realtime (apart from the loop) was that
transport stores structures and pointers directly in the ast_sip_transport
structure instead of the separate ast_transport_state structure. This patch
separates those items into the ast_sip_transport_state structure. The pattern
is roughly the same as res_pjsip_outbound_registration.
Although all current usages of ast_sip_transport and ast_sip_transport_state
were modified to use the new ast_sip_get_transport_state API, the original
items are left in ast_sip_transport and kept updated to maintain ABI
compatability for third-party modules. They are marked as deprecated and
noted that they're now in ast_sip_transport_state.
ASTERISK-25606 #close
Reported-by: Martin Moučka
Change-Id: Ic7a836ea8e786e8def51fe3f8cce855ea54f5f19
We will only rewrite the Contact header if there is no Record-Route header in
the received request. If a malfunctioning proxy places a Record-Route header
into a REGISTER request, we will decide that we shouldn't update the IP/port
in the Contact header, and we will end up storing a contact with an AoR that
contains the NAT'd IP address.
While it is nice to have the proxy *not* send a Record-Route in a REGISTER
request, it's also a good idea to not process the header in a non-dialog
message. This patch updates the code to explicitly ignore the Record-Route
header in REGISTER requests.
ASTERISK-25387 #close
Change-Id: I4bd3bcccc4003d460cc354d986b0dea2e433ef3f
A previous change made the contact only get rewritten if the dialog's
route set was not marked frozen. Unfortunately, while the intent of this
is correct, the dialog's route set actually gets marked as frozen
earlier than expected, especially for UAS dialogs.
Instead, the idea is that the contact needs to not be rewritten if there
is a pre-existing route set on the dialog. This is now accomplished by
checking the dialog's route set list instead of checking if the route
set is frozen.
Doing this causes some broken tests to begin passing again.
ASTERISK-25196
Reported by Mark Michelson
Change-Id: I525ab251fd40a52ede327a52a2810a56deb0529e
When performing some provider testing, the rewrite_contact option was
interfering with proper construction of a route set when sending an ACK
after receiving a 200 OK response to an INVITE.
The initial INVITE was sent to address sip:foo. The 200 OK had a Contact
header with URI sip:bar. In addition, the 200 OK had Record-Route
headers for sip:baz and sip:foo, in that order. Since the Record-Route
headers had the lr parameter, the result should have been:
* Set R-URI of the ACK to sip:bar.
* Add Route headers for sip:foo and sip:baz, in that order.
However, the rewrite_contact option resulted in our rewriting the
Contact header on the 200 OK to sip:foo. The result was:
* R-URI remained sip:foo.
* We added Route headers for sip:foo and sip:baz, in that order.
The result was that sip:bar was not indicated in the ACK at all, so the
far end never received our ACK. The call eventually dropped.
The intention of rewrite_contact is to rewrite the most immediate
destination of our SIP request to be the same address on which we
received a request or response. In the case of processing a SIP response
with Record-Route headers, this means that instead of rewriting the
Contact header, we should instead rewrite the bottom-most Record-Route
header. In the case of processing a SIP request with Record-Route
headers, this means we rewrite the top-most Record-route header.
Like when we rewrite the Contact header, we also ensure to update
the dialog's route set if it exists.
ASTERISK-25196 #close
Reported by Mark Michelson
Change-Id: I9702157c3603a2d0bd8a8215ac27564d366b666f
Valgrind found some memory leaks associated with
ast_pjsip_rdata_get_endpoint(). The leaks would manifest when sending
responses to OPTIONS requests, processing MESSAGE requests, and
res_pjsip supplements implementing the incoming_request callback.
* Fix ast_pjsip_rdata_get_endpoint() endpoint ref leaks in
res/res_pjsip.c:supplement_on_rx_request(),
res/res_pjsip/pjsip_options.c:send_options_response(),
res/res_pjsip_messaging.c:rx_data_to_ast_msg(), and
res/res_pjsip_messaging.c:send_response().
* Eliminated RAII_VAR() use with ast_pjsip_rdata_get_endpoint() in
res/res_pjsip_nat.c:nat_on_rx_message().
* Fixed inconsistent but benign return value in
res/res_pjsip/pjsip_options.c:options_on_rx_request().
Review: https://reviewboard.asterisk.org/r/4511/
........
Merged revisions 433222 from http://svn.asterisk.org/svn/asterisk/branches/13
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@433223 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch adds a new feature to ARI to redirect a channel to another server,
and fixes a few bugs in PJSIP's handling of the Transfer dialplan
application/ARI redirect capability.
*New Feature*
A new operation has been added to the ARI channels resource, redirect. With
this, a channel in a Stasis application can be redirected to another endpoint
of the same underlying channel technology.
*Bug fixes*
In the process of writing this new feature, two bugs were fixed in the PJSIP
stack:
(1) The existing .transfer channel callback had the limitation that it could
only transfer channels to a SIP URI, i.e., you had to pass
'PJSIP/sip:foo@my_provider.com' to the dialplan application. While this is
still supported, it is somewhat unintuitive - particularly in a world full
of endpoints. As such, we now also support specifying the PJSIP endpoint to
transfer to.
(2) res_pjsip_multihomed was, unfortunately, trying to 'help' a 302 redirect by
updating its Contact header. Alas, that resulted in the forwarding
destination set by the dialplan application/ARI resource/whatever being
rewritten with very incorrect information. Hence, we now don't bother
updating an outgoing response if it is a 302. Since this took a looong time
to find, some additional debug statements have been added to those modules
that update the Contact headers.
Review: https://reviewboard.asterisk.org/r/4316/
ASTERISK-24015 #close
Reported by: Private Name
ASTERISK-24703 #close
Reported by: Matt Jordan
........
Merged revisions 431717 from http://svn.asterisk.org/svn/asterisk/branches/13
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@431718 65c4cc65-6c06-0410-ace0-fbb531ad65f3
In NAT scenarios where a call is placed to a Grandstream phone,
res_pjsip will sometimes send the ACK to a 200 OK to the private
address of the device behind the NAT instead of the address of the NAT
device. This corrects that behavior by rewriting the address in the
Contact header in the incoming 200 OK and the dialog's target address
if necessary (since it has already been rewritten to the incorrect
private address).
(closes issue ASTERISK-23106)
Review: https://reviewboard.asterisk.org/r/3168/
Reported by: Matt Jordan
........
Merged revisions 407000 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@407001 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This adds Path support to chan_pjsip in res_pjsip_path.c with minimal
additions in res_pjsip_registrar.c to store the path and additions in
res_pjsip_outbound_registration.c to enable advertisement of path
support to registrars and intervening proxies.
Path information is stored on contacts and is enabled via Address of
Record (AoRs) and Registration configuration sections.
While adding path support, it became necessary to be able to add SIP
supplements that handled messages outside of sessions, so a framework
for handling these types of hooks was added in parallel to the
already-existing session supplements and several senders of
out-of-dialog requests were refactored as a result.
(closes issue ASTERISK-21084)
Review: https://reviewboard.asterisk.org/r/3050/
........
Merged revisions 405565 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@405566 65c4cc65-6c06-0410-ace0-fbb531ad65f3
If the 'rewrite_contact' option was enabled and a Contact header was received
which contained a '*' a crash would occur.
This change makes the res_pjsip_nat module ignore the Contact header if it
contains only a '*'.
(closes issue ASTERISK-23101)
Reported by: Matt Jordan
........
Merged revisions 405019 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@405020 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Due to the way pjproject internally works it was possible for the
NAT module to not be invoked on messages with-in a session dialog.
This means that the various parts of the message would not get rewritten
with the source IP address and port.
This change uses a session supplement to add the NAT module
to the dialog on the first incoming or outgoing INVITE.
(closes issue ASTERISK-22941)
Reported by: Leif Madsen
........
Merged revisions 403510 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@403511 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The general gist is to have a clear boundary between old SIP stuff
and new SIP stuff by having the word "SIP" for old stuff and "PJSIP"
for new stuff. Here's a brief rundown of the changes:
* The word "Gulp" in dialstrings, functions, and CLI commands is now
"PJSIP"
* chan_gulp.c is now chan_pjsip.c
* Function names in chan_gulp.c that were "gulp_*" are now "chan_pjsip_*"
* All files that were "res_sip*" are now "res_pjsip*"
* The "res_sip" directory is now "res_pjsip"
* Files in the "res_pjsip" directory that began with "sip_*" are now "pjsip_*"
* The configuration file is now "pjsip.conf" instead of "res_sip.conf"
* The module info for all PJSIP-related files now uses "PJSIP" instead of "SIP"
* CLI and AMI commands created by Asterisk's PJSIP modules now have "pjsip" as
the starting word instead of "sip"
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@395764 65c4cc65-6c06-0410-ace0-fbb531ad65f3