Currently if a channel is transferred out of a bridge, the BRIDGEPEER
variable (also BRIDGEPVTCALLID) remain set even once the channel is
out of the bridge. This patch removes these variables when leaving
the bridge.
ASTERISK-25600 #close
Reported by: Mark Michelson
Change-Id: I753ead2fffbfc65427ed4e9244c7066610e546da
During an attended transfer a thread is started that handles imparting the
bridge channel. From the start of the thread to when the bridge channel is
ready exists a gap that can potentially cause problems (for instance, the
channel being swapped is hung up before the replacement channel enters the
bridge thus stopping the transfer). This patch adds a condition that waits
for the impart thread to get to a point of acceptable readiness before
allowing the initiating thread to continue.
ASTERISK-24782
Reported by: John Bigelow
Change-Id: I08fe33a2560da924e676df55b181e46fca604577
After completing an attended transfer the transfer target channel was not being
hung up after leaving the bridge. Added an explicit softhangup to hangup said
channel, but only if it was previously bridged.
ASTERISK-24782 #close
Reported by: John Bigelow
Change-Id: Idde9543d56842369384a5e8c00d72a22bbc39ada
Due to a race condition there was a chance that during an attended transfer the
channel's application would return NULL. This, of course, would cause a crash
when attempting to access the memory. This patch retrieves the channel's app
at an earlier time in processing in hopes that the app name is available.
However, if it is not then "unknown" is used instead. Since some string value
is now always present the crash can no longer occur.
ASTERISK-24869 #close
Reported by: viniciusfontes
Review: https://gerrit.asterisk.org/#/c/133/
Change-Id: I5134b84c4524906d8148817719d76ffb306488ac
Git does not support the ability to replace a token with a version
string during check-in. While it does have support for replacing a
token on clone, this is somewhat sub-optimal: the token is replaced
with the object hash, which is not particularly easy for human
consumption. What's more, in practice, the source file version was often
not terribly useful. Generally, when triaging bugs, the overall version
of Asterisk is far more useful than an individual SVN version of a file. As a
result, this patch removes Asterisk's support for showing source file
versions.
Specifically, it does the following:
* Rename ASTERISK_FILE_VERSION macro to ASTERISK_REGISTER_FILE, and
remove passing the version in with the macro. Other facilities
than 'core show file version' make use of the file names, such as
setting a debug level only on a specific file. As such, the act of
registering source files with the Asterisk core still has use. The
macro rename now reflects the new macro purpose.
* main/asterisk:
- Refactor the file_version structure to reflect that it no longer
tracks a version field.
- Remove the "core show file version" CLI command. Without the file
version, it is no longer useful.
- Remove the ast_file_version_find function. The file version is no
longer tracked.
- Rename ast_register_file_version/ast_unregister_file_version to
ast_register_file/ast_unregister_file, respectively.
* main/manager: Remove value from the Version key of the ModuleCheck
Action. The actual key itself has not been removed, as doing so would
absolutely constitute a backwards incompatible change. However, since
the file version is no longer tracked, there is no need to attempt to
include it in the Version key.
* UPGRADE: Add notes for:
- Modification to the ModuleCheck AMI Action
- Removal of the "core show file version" CLI command
Change-Id: I6cf0ff280e1668bf4957dc21f32a5ff43444a40e
When a channel enters the bridging system it is first made compatible with
the bridge and then the bridge technology makes the channel compatible
with the technology. For all but the DAHDI native and softmix bridge
technologies the make channel compatible with the bridge step is an
effective noop because the other technologies allow all audio formats.
For the DAHDI native bridge technology it doesn't matter because it is not
an initial bridge technology and chan_dahdi allows only one native format
per channel. For the softmix bridge technology, it is a noop at best and
harmful at worst because the wrong translation path could be setup if the
channel's native formats allow more than one audio format.
This is an intermediate patch for a series of patches aimed at improving
translation path choices.
* Removed code dealing with the unnecessary step of making the channel
compatible with the bridge.
ASTERISK-24841
Reported by: Matt Jordan
Review: https://reviewboard.asterisk.org/r/4600/
........
Merged revisions 434424 from http://svn.asterisk.org/svn/asterisk/branches/13
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@434430 65c4cc65-6c06-0410-ace0-fbb531ad65f3
After completing an attended transfer the transfer target channel (the one that
gets swapped out) was not being hung up after leaving the bridge. This resulted
in a channel possibly being left around. Added an explicit softhangup for the
channel in question after the transfer is successfully completed in order to
make sure the channel is hung up.
ASTERISK-24782 #close
Reported by: John Bigelow
Review: https://reviewboard.asterisk.org/r/4575/
........
Merged revisions 434240 from http://svn.asterisk.org/svn/asterisk/branches/13
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@434241 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Since 'core stop now' and 'core restart now' do not stop modules,
it is unsafe for most of the core to run cleanups. Originally all
cleanups used ast_register_atexit, and were only changed when it
was shown to be unsafe. ast_register_atexit is now used only when
absolutely required to prevent corruption and close child processes.
Exceptions that need to use ast_register_atexit:
* CDR: Flush records.
* res_musiconhold: Kill external applications.
* AstDB: Close the DB.
* canary_exit: Kill canary process.
ASTERISK-24142 #close
Reported by: David Brillert
ASTERISK-24683 #close
Reported by: Peter Katzmann
ASTERISK-24805 #close
Reported by: Badalian Vyacheslav
ASTERISK-24881 #close
Reported by: Corey Farrell
Review: https://reviewboard.asterisk.org/r/4500/
Review: https://reviewboard.asterisk.org/r/4501/
........
Merged revisions 433495 from http://svn.asterisk.org/svn/asterisk/branches/11
........
Merged revisions 433497 from http://svn.asterisk.org/svn/asterisk/branches/13
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@433498 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Switch logger callid's from AO2 objects to simple integers.
This helps in two ways. Copying integers is faster than
referencing AO2 objects, so this will result in a small
reduction in logger overhead. This also erases the possibility
of an infinate loop caused by an invalid callid in
threadstorage.
ASTERISK-24833 #comment Committed callid conversion to trunk.
Reported by: Corey Farrell
Review: https://reviewboard.asterisk.org/r/4466/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@432834 65c4cc65-6c06-0410-ace0-fbb531ad65f3
There are three CLI commands to stop and restart Asterisk each.
1) core stop/restart now - Hangup all calls and stop or restart Asterisk.
New channels are prevented while the shutdown request is pending.
2) core stop/restart gracefully - Stop or restart Asterisk when there are
no calls remaining in the system. New channels are prevented while the
shutdown request is pending.
3) core stop/restart when convenient - Stop or restart Asterisk when there
are no calls in the system. New calls are not prevented while the
shutdown request is pending.
ARI has made stopping/restarting Asterisk more problematic. While a
shutdown request is pending it is desirable to continue to process ARI
HTTP requests for current calls. To handle the current calls while a
shutdown request is pending, a new committed to shutdown phase is needed
so ARI applications can deal with the calls until the system is fully
committed to shutdown.
* Added a new shutdown committed phase so ARI applications can deal with
calls until the final committed to shutdown phase is reached.
* Made refuse new HTTP requests when the system has reached the final
system shutdown phase. Starting anything while the system is actively
releasing resources and unloading modules is not a good thing.
* Split the bridging framework shutdown to not cleanup the global bridging
containers when shutting down in a hurry. This is similar to how other
modules prevent crashes on rapid system shutdown.
* Moved ast_begin_shutdown(), ast_cancel_shutdown(), and
ast_shutting_down(). You should not have to include channel.h just to
access these system functions.
ASTERISK-24752 #close
Reported by: Matthew Jordan
Review: https://reviewboard.asterisk.org/r/4399/
........
Merged revisions 431692 from http://svn.asterisk.org/svn/asterisk/branches/13
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@431694 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When swapping a Local channel in place of one already
in a bridge (to complete a bridge attended transfer),
the channel that was swapped out can actually be hung
up before the stasis bridge push callback executes on
the independant transfer thread. This results in the
stasis app loop dropping out and removing the control
that has the the app name which the local replacement
channel needs so it can re-enter stasis.
To avoid this race condition a new push_peek callback
has been added, and called from the ast_bridge_impart
thread before it launches the independant thread that
will complete the transfer. Now the stasis push_peek
callback can copy the stasis app name before the swap
channel can hang up.
ASTERISK-24649
Review: https://reviewboard.asterisk.org/r/4382/
........
Merged revisions 431450 from http://svn.asterisk.org/svn/asterisk/branches/13
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@431451 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When code imparts a channel into a bridge to swap with another channel, a
ref needs to be held on the swap channel to ensure that it cannot
dissapear before finding it in the bridge.
* The ast_bridge_join() swap channel parameter now always steals a ref for
the swap channel. This is the only change to the bridge framework's
public API semantics.
* bridge_channel_internal_join() now requires the bridge_channel->swap
channel to pass in a ref.
ASTERISK-24649
Reported by: John Bigelow
Review: https://reviewboard.asterisk.org/r/4354/
........
Merged revisions 430975 from http://svn.asterisk.org/svn/asterisk/branches/13
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@430976 65c4cc65-6c06-0410-ace0-fbb531ad65f3
* Made the following AMI actions use list API calls for consistency:
Agents
BridgeInfo
BridgeList
BridgeTechnologyList
ConfbridgeLIst
ConfbridgeLIstRooms
CoreShowChannels
DAHDIShowChannels
DBGet
DeviceStateList
ExtensionStateList
FAXSessions
Hangup
IAXpeerlist
IAXpeers
IAXregistry
MeetmeList
MeetmeListRooms
MWIGet
ParkedCalls
Parkinglots
PJSIPShowEndpoint
PJSIPShowEndpoints
PJSIPShowRegistrationsInbound
PJSIPShowRegistrationsOutbound
PJSIPShowResourceLists
PJSIPShowSubscriptionsInbound
PJSIPShowSubscriptionsOutbound
PresenceStateList
PRIShowSpans
QueueStatus
QueueSummary
ShowDialPlan
SIPpeers
SIPpeerstatus
SIPshowregistry
SKINNYdevices
SKINNYlines
Status
VoicemailUsersList
* Incremented the AMI version to 2.7.0.
* Changed astman_send_listack() to not use the listflag parameter and
always set the value to "Start" so the start capitalization is consistent.
i.e., The FAXSessions used "Start" while the rest of the system used
"start". The corresponding complete event always used "Complete".
* Fixed ami_show_resource_lists() "PJSIPShowResourceLists" to output the
AMI ActionID for all of its list events.
* Fixed off-nominal AMI protocol error in manager_bridge_info(),
manager_parking_status_single_lot(), and
manager_parking_status_all_lots(). Use of astman_send_error() after
responding to the original AMI action request violates the action response
pattern by sending two responses.
* Fixed minor protocol error in action_getconfig() when no requested
categories are found. Each line needs to be formatted as "Header: text".
* Fixed off-nominal memory leak in manager_build_parked_call_string().
* Eliminated unnecessary use of RAII_VAR() in ami_subscription_detail().
ASTERISK-24049 #close
Reported by: Jonathan Rose
Review: https://reviewboard.asterisk.org/r/4315/
........
Merged revisions 430434 from http://svn.asterisk.org/svn/asterisk/branches/13
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@430435 65c4cc65-6c06-0410-ace0-fbb531ad65f3
From reviewboard:
"During blind transfer testing, it was noticed that tests were failing
occasionally because the ARI blind transfer event was not being sent.
After investigating, I detected a race condition in the blind transfer
code. When blind transferring a single channel, the actual transfer
operation (i.e. removing the transferee from the bridge and directing
them to the proper dialplan location) is queued onto the transferee
bridge channel. After queuing the transfer operation, the blind transfer
Stasis message is published. At the time of publication, snapshots of
the channels and bridge involved are created. The ARI subscriber to the
blind transfer Stasis message then attempts to determine if the bridge
or any of the involved channels are subscribed to by ARI applications.
If so, then the blind transfer message is sent to the applications. The
way that the ARI blind transfer message handler works is to first see
if the transferer channel is subscribed to. If not, then iterate over
all the channel IDs in the bridge snapshot and determine if any of
those are subscribed to. In the test we were running, the lone
transferee channel was subscribed to, so an ARI event should have been
sent to our application. Occasionally, though, the bridge snapshot did
not have any channels IDs on it at all. Why?
The problem is that since the blind transfer operation is handled by a
separate thread, it is possible that the transfer will have completed and
the channels removed from the bridge before we publish the blind transfer
Stasis message. Since the blind transfer has completed, the bridge on
which the transfer occurred no longer has any channels on it, so the
resulting bridge snapshot has no channels on it. Through investigation of
the code, I found that attended transfers can have this issue too for the
case where a transferee is transferred to an application."
The fix employed here is to decouple the creation of snapshots for the transfer
messages from the publication of the transfer messages. This way, snapshots
can be created to reflect what they are at the time of the transfer operation.
Review: https://reviewboard.asterisk.org/r/4135
........
Merged revisions 427848 from http://svn.asterisk.org/svn/asterisk/branches/12
........
Merged revisions 427870 from http://svn.asterisk.org/svn/asterisk/branches/13
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@427873 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When a channel is imparted to a bridge, the invocation of the function may
provide an ast_bridge_features struct. Upon passing this to ast_bridge_impart,
the caller must assume that ownership has passed to the function, as in all
paths the function destroys the struct prior to returning (as its purpose is
to configure the behavior of the channel while in the bridge). On one off
nominal path - where the channel already has a PBX thread - the struct was not
being destroyed.
This patch fixes that glitch.
ASTERISK-24437 #close
Reported by: Scott Griepentrog
........
Merged revisions 426431 from http://svn.asterisk.org/svn/asterisk/branches/12
........
Merged revisions 426432 from http://svn.asterisk.org/svn/asterisk/branches/13
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@426433 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When a smart bridge operation occurs and a bridge transitions from one
technology to another the old technology is provided the channels formerly
in it and told that they are leaving. Unfortunately the bridge provided
along with them is incomplete. The bridge, despite there being channels in it,
contains none. This forces technology implementations to have additional
logic when channels are leaving or to store their own duplicated
state.
This change makes the bridge more complete so it contains the expected
channels. Now that the bridge is complete special logic within
bridge_native_rtp is no longer needed and has been removed.
Review: https://reviewboard.asterisk.org/r/4057/
........
Merged revisions 425242 from http://svn.asterisk.org/svn/asterisk/branches/12
........
Merged revisions 425243 from http://svn.asterisk.org/svn/asterisk/branches/13
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@425244 65c4cc65-6c06-0410-ace0-fbb531ad65f3
On a SIP reinvite that changes media strams, the PJSIP channel driver was
flooding the log with "Asked to transmit frame type %s, while native
formats is %s" warnings.
* Fixes PJSIP not setting up translation paths when the formats change on
a reinvite. AFS-63 was effectively reintroduced because of the media
formats work. res_pjsip_sdp_rtp.c:set_caps()
* Improved the unexpected frame format WARNING message to include more
information.
* Added protective locking while altering formats on a channel. Reworked
set_format() to simplify and protect the formats under manipulation.
* Restored some code that got lost in the media_formats work.
(channel.c:set_format() and res_pjsip_sdp_rtp.c:set_caps())
AFS-137 #close
Reported by: Mark Michelson
Review: https://reviewboard.asterisk.org/r/3906/
........
Merged revisions 421645 from http://svn.asterisk.org/svn/asterisk/branches/13
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@421646 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When a blind transfer occurs that is forced to create a local channel
pair to satisfy the transfer request, information about the local
channel pair is not published. This adds a field to describe that
channel to the blind transfer message struct so that this information
is conveyed properly to consumers of the blind transfer message.
This also fixes a bug in which Stasis() was unable to properly identify
the channel that was replacing an existing Stasis-controlled channel
due to a blind transfer.
Reported by: Matt Jordan
Review: https://reviewboard.asterisk.org/r/3921/
........
Merged revisions 421537 from http://svn.asterisk.org/svn/asterisk/branches/12
........
Merged revisions 421538 from http://svn.asterisk.org/svn/asterisk/branches/13
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@421539 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This introduces stasis.conf and a mechanism to prevent certain message
types from being published. Internally, this works by preventing the
chosen message types from being created which ensures that those
message types can never be published. This patch also adjusts message
publishers such that message payloads are not created if the related
message type is not available.
ASTERISK-23943 #close
Review: https://reviewboard.asterisk.org/r/3823/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@420124 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The "bridge destroy" CLI command is invasive to bridges and can leave them in an unexpected
state for the users of them. Since this command may be useful for developers it is now
only available when developer mode is available. To take its place "all" has been added
as a valid option to the "bridge kick" CLI command. It will kick all of the channels
in the bridge out.
ASTERISK-23987
Reported by: Matt Jordan
Review: https://reviewboard.asterisk.org/r/3840/
........
Merged revisions 419536 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@419537 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The previous behavior was to simply set the accountcode of an outgoing
channel to the accountcode of the channel initiating the call. It was
done this way a long time ago to allow the accountcode set on the SIP/100
channel to be propagated to a local channel so the dialplan execution on
the Local;2 channel would have the SIP/100 accountcode available.
SIP/100 -> Local;1/Local;2 -> SIP/200
Propagating the SIP/100 accountcode to the local channels is very useful.
Without any dialplan manipulation, all channels in this call would have
the same accountcode.
Using dialplan, you can set a different accountcode on the SIP/200 channel
either by setting the accountcode on the Local;2 channel or by the Dial
application's b(pre-dial), M(macro) or U(gosub) options, or by the
FollowMe application's b(pre-dial) option, or by the Queue application's
macro or gosub options. Before Asterisk v12, the altered accountcode on
SIP/200 will remain until the local channels optimize out and the
accountcode would change to the SIP/100 accountcode.
Asterisk v1.8 attempted to add peeraccount support but ultimately had to
punt on the support. The peeraccount support was rendered useless because
of how the CDR code needed to unconditionally force the caller's
accountcode onto the peer channel's accountcode. The CEL events were thus
intentionally made to always use the channel's accountcode as the
peeraccount value.
With the arrival of Asterisk v12, the situation has improved somewhat so
peeraccount support can be made to work. Using the indicated example, the
the accountcode values become as follows when the peeraccount is set on
SIP/100 before calling SIP/200:
SIP/100 ---> Local;1 ---- Local;2 ---> SIP/200
acct: 100 \/ acct: 200 \/ acct: 100 \/ acct: 200
peer: 200 /\ peer: 100 /\ peer: 200 /\ peer: 100
If a channel already has an accountcode it can only change by the
following explicit user actions:
1) A channel originate method that can specify an accountcode to use.
2) The calling channel propagating its non-empty peeraccount or its
non-empty accountcode if the peeraccount was empty to the outgoing
channel's accountcode before initiating the dial. e.g., Dial and
FollowMe. The exception to this propagation method is Queue. Queue will
only propagate peeraccounts this way only if the outgoing channel does not
have an accountcode.
3) Dialplan using CHANNEL(accountcode).
4) Dialplan using CHANNEL(peeraccount) on the other end of a local
channel pair.
If a channel does not have an accountcode it can get one from the
following places:
1) The channel driver's configuration at channel creation.
2) Explicit user action as already indicated.
3) Entering a basic or stasis-mixing bridge from a peer channel's
peeraccount value.
You can specify the accountcode for an outgoing channel by setting the
CHANNEL(peeraccount) before using the Dial, FollowMe, and Queue
applications. Queue adds the wrinkle that it will not overwrite an
existing accountcode on the outgoing channel with the calling channels
values.
Accountcode and peeraccount values propagate to an outgoing channel before
dialing. Accountcodes also propagate when channels enter or leave a basic
or stasis-mixing bridge. The peeraccount value only makes sense for
mixing bridges with two channels; it is meaningless otherwise.
* Made peeraccount functional by changing accountcode propagation as
described above.
* Fixed CEL extracting the wrong ie value for the peeraccount. This was
done intentionally in Asterisk v1.8 when that version had to punt on
peeraccount.
* Fixed a few places dealing with accountcodes that were reading from
channels without the lock held.
AFS-65 #close
Review: https://reviewboard.asterisk.org/r/3601/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@419520 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch allows the current owner of a channel to define various
feature hooks to be made available once the channel has entered a
bridge. This includes any hooks that are setup on the
ast_bridge_features struct such as DTMF hooks, bridge event hooks
(join, leave, etc.), and interval hooks.
Review: https://reviewboard.asterisk.org/r/3649/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@417361 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch addresses some aesthetic issues in Asterisk. These are all just
minor tweaks to improve the look of the CLI when used in a variety of
settings. Specifically:
* A number of chatty verbose messages were removed or demoted to DEBUG
messages. Verbose messages with a verbosity level of 5 or higher were -
if kept as verbose messages - demoted to level 4. Several messages
that were emitted at verbose level 3 were demoted to 4, as announcement
of dialplan applications being executed occur at level 3 (and so the
effects of those applications should generally be less).
* Some verbose messages that only appear when their respective 'debug'
options are enabled were bumped up to always be displayed.
* Prefix/timestamping of verbose messages were moved to the verboser
handlers. This was done to prevent duplication of prefixes when the
timestamp option (-T) is used with the CLI.
* Verbose magic is removed from messages before being emitted to
non-verboser handlers. This prevents the magic in multi-line verbose
messages (such as SIP debug traces or the output of DumpChan) from
being written to files.
* _Slightly_ better support for the "light background" option (-W) was
added. This includes using ast_term_quit in the output of XML
documentation help, as well as changing the "Asterisk Ready" prompt to
bright green on the default background (which stands a better chance of
being displayed properly than bright white).
Review: https://reviewboard.asterisk.org/r/3547/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@414798 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When bridge locking was added for bridge snapshot creation, some
locations where bridge locking was added were not guaranteed to
actually have a bridge and locking NULL AO2 objects tends to cause
segfaults. This ensures that NULL bridges aren't locked.
........
Merged revisions 413073 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@413074 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Much needed was a way to assign id to objects on creation, and
much change was necessary to accomplish it. Channel uniqueids
and linkedids are split into separate string and creation time
components without breaking linkedid propgation. This allowed
the uniqueid to be specified by the user interface - and those
values are now carried through to channel creation, adding the
assignedids value to every function in the chain including the
channel drivers. For local channels, the second channel can be
specified or left to default to a ;2 suffix of first. In ARI,
bridge, playback, and snoop objects can also be created with a
specified uniqueid.
Along the way, the args order to allocating channels was fixed
in chan_mgcp and chan_gtalk, and linkedid is no longer lost as
masquerade occurs.
(closes issue ASTERISK-23120)
Review: https://reviewboard.asterisk.org/r/3191/
........
Merged revisions 410157 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@410158 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Original commit message by mmichelson (asterisk 12 r403311):
"This adds channel locks around calls to create channel snapshots as well
as other functions which operate on a channel and then end up
creating a channel snapshot. Functions that expect the channel to be
locked prior to being called have had their documentation updated to
indicate such."
The above was initially committed and then reverted at r403398. The problem
was found to be in core_local.c in the publish_local_bridge_message function.
The ast_unreal_lock_all function locks and adds a reference to the returned
channels and while they were being unlocked they were not being unreffed when
no longer needed. Fixed by unreffing the channels.
Also in bridge.c a lock was obtained on "other->chan", but then an attempt was
made to unlock "other" and not the previously locked channel. Fixed by
unlocking "other->chan"
(closes issue ASTERISK-22709)
Reported by: John Bigelow
........
Merged revisions 404237 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@404260 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Bridges have two new optional properties, a creator and a name.
Certain consumers of bridges will automatically provide bridges that
they create with these properties. Examples include app_bridgewait,
res_parking, app_confbridge, and app_agent_pool. In addition, a name
may now be provided as an argument to the POST function for creating
new bridges via ARI.
(closes issue AFS-47)
Review: https://reviewboard.asterisk.org/r/3070/
........
Merged revisions 404042 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@404043 65c4cc65-6c06-0410-ace0-fbb531ad65f3
There were still a few cases in which ATTENDEDTRANSFER and BLINDTRANSFER
wouldn't be set on channels involved with blind and attended transfers.
This would happen with features that were initialized by channel driver
specific mechanisms in multiparty calls. This patch resolves those cases
while attempted to keep the behavior for setting those variables as
consistent as possible.
(closes issue AFS-24)
Review: https://reviewboard.asterisk.org/r/3040/
........
Merged revisions 403781 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@403783 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This adds channel locks around calls to create channel snapshots as well
as other functions which operate on a channel and then end up
creating a channel snapshot. Functions that expect the channel to be
locked prior to being called have had their documentation updated to
indicate such.
........
Merged revisions 403311 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@403314 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Adds the following AMI events, closely following their CLI counterparts:
BridgeDestroy
BridgeKick
BridgeTechnologyList
BridgeTechnologySuspend
BridgeTechnologyUnsuspend
BridgeDestroy kicks an entire bridge, where BridgeKick kicks just one
channel off the bridge. When kicking a channel, specifying the bridge
also (optional) insures it is not removed from the wrong bridge. The
BridgeTechnology events allow viewing and changing suspension status,
which affects only subsequent not active bridging.
(closes ASTERISK-22356)
Reported by: Richard Mudgett
Review: https://reviewboard.asterisk.org/r/2973/
........
Merged revisions 402387 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@402388 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The original issue noted that the bridge is orphaned when res_parking.so
is not loaded and a call uses the dial kK flags.
A similar issue happens when only one of the park flags is used. In this
case you have the bridge with one or the other channel left in it. The
channel and bridge will stay around until the channel hangs up.
* Fixed the initial bridge channel push failure to act as if the channel
were kicked out of the bridge. The bridge then decides if it needs to be
dissolved.
(closes issue ASTERISK-22629)
Reported by: Kevin Harwell
Review: https://reviewboard.asterisk.org/r/2928/
........
Merged revisions 401424 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@401425 65c4cc65-6c06-0410-ace0-fbb531ad65f3
A common idiom in Asterisk is to due something like:
for (ao2_obj = list_beginning; ao2_obj = next_item; ao2_ref(ao2_obj, -1)) {
...do stuff...
}
This is nice because it automatically takes care of the object references
for you. However, there is a pitfall here. If a break statement is in the
for loop, then the current reference is not cleaned up. In some cases, this
is on purpose, but in others there is a leak. This commit fixes the leak
cases.
........
Merged revisions 401248 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@401249 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The Dial, Queue, and FollowMe applications need to inhibit the bridging
initial connected line exchange in order to support the 'I' option.
* Replaced the pass_reference flag on ast_bridge_join() with a flags
parameter to pass other flags defined by enum ast_bridge_join_flags.
* Replaced the independent flag on ast_bridge_impart() with a flags
parameter to pass other flags defined by enum ast_bridge_impart_flags.
* Since the Dial, Queue, and FollowMe applications are now the only
callers of ast_bridge_call() and ast_bridge_call_with_flags(), changed the
calling contract to require the initial COLP exchange to already have been
done by the caller.
* Made all callers of ast_bridge_impart() check the return value. It is
important. As a precaution, I also made the compiler complain now if it
is not checked.
* Did some cleanup in parking_tests.c as a result of checking the
ast_bridge_impart() return value.
An independent, but associated change is:
* Reduce stack usage in ast_indicate_data() and add a dropping redundant
connected line verbose message.
(closes issue ASTERISK-22072)
Reported by: Joshua Colp
Review: https://reviewboard.asterisk.org/r/2845/
........
Merged revisions 399136 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@399138 65c4cc65-6c06-0410-ace0-fbb531ad65f3
DTMF start/end and hold/unhold events have state because a DTMF begin
event and hold event must be ended by something.
The following cases need to be handled when a channel is moved around in
the system.
* When a channel leaves a bridge it may owe a DTMF end event to the
bridge.
* When a channel leaves a bridge it may owe an UNHOLD event to the bridge.
(This case is explicitly ignored because things like transfers need
explicit control over this.)
* When a channel leaves the bridging system it may need to simulate a DTMF
end event to the channel.
* When a channel leaves the bridging system it may need to simulate an
UNHOLD event to the channel.
The patch also fixes the following:
* Fixes playing a file and restarting MOH using the latest MOH class used.
(closes issue ASTERISK-22043)
Reported by: Matt Jordan
Review: https://reviewboard.asterisk.org/r/2791/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@397577 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The cause code needs to be passed from the disconnecting channel to the
bridge peers if the disconnecting channel dissolves the bridge.
* Made the call to an app_agent_pool agent disconnect with the busy cause
code if the agent does not ack the call in time or hangs up before acking
the call.
(closes issue ASTERISK-22042)
Reported by: Matt Jordan
Review: https://reviewboard.asterisk.org/r/2772/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@397472 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Jonathan Rose
Kevin Harwell
Matt Jordan
Richard Mudgett
Corey Farrell
Scott Griepentrog
Mark Michelson
Joshua Colp
Kinsey Moore
David M. Lee