https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r283173 | russell | 2010-08-23 06:58:34 -0500 (Mon, 23 Aug 2010) | 5 lines
Expand cel_custom.conf.sample.
Include the usage of CSV_QUOTE() to ensure data has valid CSV formatting. Also list
the special CEL variables that are available for use in the mapping.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@283174 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
................
r283050 | rmudgett | 2010-08-20 10:35:38 -0500 (Fri, 20 Aug 2010) | 36 lines
Merged revisions 283049 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
................
r283049 | rmudgett | 2010-08-20 10:31:03 -0500 (Fri, 20 Aug 2010) | 29 lines
Merged revisions 283048 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r283048 | rmudgett | 2010-08-20 10:24:36 -0500 (Fri, 20 Aug 2010) | 22 lines
Q931 - Sending PROGRESS after sending ALERTING is a protocol error
The PRI layer in chan_dadhi will check if a PROGRESS message has already
been sent, and not allow sending another (although that is technically
allowed by the Q931 spec), however it does not protect against sending an
ALERTING and then sending a PROGRESS message, which is a violation of the
specification.
Most switches don't seem to care too deeply about this, but some do, and
will disconnect the call when receiving this invalid sequence.
Protocol specification reference: T-REC-Q.931-199805-I page 223, "Figure
A.5/Q.931 -- Overview protocol control (network side) point-point
(sheet 3 of 8)"
(closes issue #17874)
Reported by: nic_bellamy
Patches:
asterisk-1.4-r282537_no-progress-after-alerting.patch uploaded by nic bellamy (license 299)
asterisk-1.6.2-r282537_no-progress-after-alerting.patch uploaded by nic bellamy (license 299)
asterisk-trunk-r282537_no-progress-after-alerting.patch uploaded by nic bellamy (license 299)
........
................
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@283051 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
................
r282895 | dvossel | 2010-08-19 16:07:20 -0500 (Thu, 19 Aug 2010) | 25 lines
Merged revisions 282894 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
................
r282894 | dvossel | 2010-08-19 16:05:54 -0500 (Thu, 19 Aug 2010) | 18 lines
Merged revisions 282893 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r282893 | dvossel | 2010-08-19 16:03:24 -0500 (Thu, 19 Aug 2010) | 11 lines
tos_sip option was not being set correctly
When tos_sip is used, the tos of the sip socket is only set
correctly if the socket binding changes on a reload. If the binding
stays the same but the TOS changes, the new tos value would not take
into effect. This patch fixes that.
(closes issue #17712)
Reported by: nickb
........
................
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@282896 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Consolidates all offhook (new call with dialtone) to setsubstate_offhook. This should be roughly equivalent to existing code, although a couple of calls now run through the full offhook sequence rather than an abbreviated one.
(closes issue #17812)
Reported by: wedhorn
Patches:
cleanup.stateoffhook.diff uploaded by wedhorn (license 30)
Tested by: salecha, wedhorn
Review: NA
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@282701 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r282671 | rmudgett | 2010-08-18 10:27:51 -0500 (Wed, 18 Aug 2010) | 1 line
Use the correct operator when calculating the PRI span devstate.
........
r282672 | rmudgett | 2010-08-18 10:28:27 -0500 (Wed, 18 Aug 2010) | 1 line
Use the correct type for aoce_delayhangup bit field.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@282673 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r282639 | mnicholson | 2010-08-18 08:10:39 -0500 (Wed, 18 Aug 2010) | 13 lines
Properly handle 200 and unknown responses conatined in NOTIFY requests received in response to REFER requests.
This patch fixes the way asterisk handles NOTIFY requests received in response to REFER requests. These changes to NOTIFY handler were first introduced in r217482. This new change properly handles the 200 response by queueing an AST_TRANSFER_SUCCESS control frame and also prevents that control frame from being queued when provisional and unknown responses are received.
(issue #17486)
Reported by: davidw
Tested by: mnicholson
(issue #12713)
Reported by: davidw
Review: https://reviewboard.asterisk.org/r/860/
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@282640 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
................
r282468 | twilson | 2010-08-16 12:53:44 -0500 (Mon, 16 Aug 2010) | 30 lines
Merged revisions 282467 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
................
r282467 | twilson | 2010-08-16 12:32:01 -0500 (Mon, 16 Aug 2010) | 23 lines
Merged revisions 282430 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r282430 | twilson | 2010-08-16 12:06:37 -0500 (Mon, 16 Aug 2010) | 16 lines
Send a SRCCHANGE indication when we masquerade
Masquerading a channel means that the src of the audio is potentially
changing, so send a SRCCHANGE so that RTP-based media streams can get
a new SSRC generated to reflect the change. Original patch by addix
(along with lots of testing--thanks!).
(closes issue #17007)
Reported by: addix
Patches:
1001-reset-SSRC-original-channel.diff uploaded by addix (license 1006)
srcchange.diff uploaded by twilson (license 396)
Tested by: addix, twilson
Review: https://reviewboard.asterisk.org/r/862/
........
................
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@282502 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
................
r282470 | lmadsen | 2010-08-16 13:01:00 -0500 (Mon, 16 Aug 2010) | 15 lines
Merged revisions 282469 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
........
r282469 | lmadsen | 2010-08-16 13:00:09 -0500 (Mon, 16 Aug 2010) | 7 lines
Add information about creating sounds files using
the sounds tools publically available so that others can create their
own sounds prompts using the same tools we use to generate sounds releases.
This allows people creating their own prompts to sound consistent with
the prompts available from the open source project.
SWP-595
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@282471 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r282334 | rmudgett | 2010-08-13 18:53:36 -0500 (Fri, 13 Aug 2010) | 6 lines
PRI CCSS may use a stale dial string for the recall dial string.
If an outgoing call negotiates a different B channel than initially
requested, the saved original dial string was not transferred to the new B
channel. CCSS uses that dial string to generate the recall dial string.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@282335 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
................
r282236 | dvossel | 2010-08-13 13:58:10 -0500 (Fri, 13 Aug 2010) | 23 lines
Merged revisions 282235 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
........
r282235 | dvossel | 2010-08-13 13:54:53 -0500 (Fri, 13 Aug 2010) | 16 lines
only do magic pickup when notifycid is enabled
A new way of doing BLF pickup was introduced into 1.6.2. This feature
adds a call-id value into the XML of a SIP_NOTIFY message sent to alert
a subscriber that a device is ringing. This option should only be enabled
when the new 'notifycid' option is set... but this was not the case. Instead
the call-id value was included for every RINGING Notify message, which
caused a regression for people who used other methods for call pickup.
(closes issue #17633)
Reported by: urosh
Patches:
chan_sip.txt uploaded by urosh (license )
blf_cid_issue.diff uploaded by dvossel (license 671)
Tested by: dvossel, urosh, okrief, alecdavis
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@282237 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r282200 | twilson | 2010-08-13 11:00:02 -0500 (Fri, 13 Aug 2010) | 10 lines
Detect when libsrtp cannot be linked in a shared library
The libsrtp build system currently does not produce a shared library
or a static library compiled with -fPIC, so on 64-bit systems it is
possible that we will get a compile error if libsrtp is installed and
res_srtp is selected in menuselect.
This patch attempts to detect this situation and provide the user with
instructions to work around the problem.
........
r282201 | twilson | 2010-08-13 11:02:20 -0500 (Fri, 13 Aug 2010) | 2 lines
Whitespace fix :-/
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@282202 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r282098 | rmudgett | 2010-08-12 17:06:06 -0500 (Thu, 12 Aug 2010) | 7 lines
Separate call completion config parameter allocation and default initialization.
If you ever have a need to reset the call completion config parameters
to defaults, now you can.
And no Virginia, C++ idioms do not always work in C.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@282099 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r282047 | dvossel | 2010-08-12 15:15:41 -0500 (Thu, 12 Aug 2010) | 35 lines
improved translation paths for wideband codecs
The problem I'm addressing is that Asterisk's current
method of building the least cost translation paths
between codecs does not take into account sample rate.
For instance, it was possible for siren14 (a 32khz codec),
to contain the a translation path to siren7 (a 16khz
audio codec) that goes through slin at 8khz. In this
case Asterisk takes a 32khz codec, down samples it to
8khz and then up samples it to 16khz which is terrible
regardless if it is computationally less expensive. This
patch now builds translation paths that give priority to
maintaining the best possible sample rate before taking
into consideration computational cost. This patch also
adds cli commands to expose what translation paths are
actually being used.
Changes:
1. Translation paths will never contain a step that changes
the sample rate unless absolutely necessary.
2. When choosing the best codec to make two channels compatible.
Shared codecs with the highest sample rate are given priority.
3. A new cli command to show all translation paths available
for a specific codec 'core show translation paths [codec name]'
has been added.
4. 'core show translation' which displays the translation
matrix now includes the new higher bit audio codecs in the table.
5. 'core show channel [channel name]' now displays the
translation paths if translation is used.
(closes issue #16841)
Reported by: dvossel
Review: https://reviewboard.asterisk.org/r/842/
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@282048 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r281982 | russell | 2010-08-12 11:33:30 -0500 (Thu, 12 Aug 2010) | 5 lines
Remove debugging output from verbose messages.
Pointer values to internal objects is not terribly useful to users in the
verbose messages about adding extensions and contexts.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@281983 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
................
r281913 | jpeeler | 2010-08-11 22:03:37 -0500 (Wed, 11 Aug 2010) | 34 lines
Merged revisions 281912 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
................
r281912 | jpeeler | 2010-08-11 22:01:38 -0500 (Wed, 11 Aug 2010) | 27 lines
Merged revisions 281911 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r281911 | jpeeler | 2010-08-11 22:00:14 -0500 (Wed, 11 Aug 2010) | 20 lines
Ensure SSRC is changed when media source is changed to resolve audio delay.
This change causes the SSRC to change right before the channels are bridged,
which is what used to happen. It seems that fixes were made to attempt limiting
SSRC changes, targeted mainly at sending DTMF. DTMF is not affecting the SSRC
with this change.
There are two other control frames sent in ast_channel_bridge that probably
should also be changed to AST_CONTROL_SRCCHANGE as well, but I'm going to leave
this change up to the discretion of resolving issue #17007.
For reference - old review implementing new control frame SRCCHANGE:
https://reviewboard.asterisk.org/r/540
(closes issue #17404)
Reported by: sdolloff
Patches:
bug17404.patch uploaded by jpeeler (license 325)
Tested by: sdolloff
........
................
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@281914 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
................
r281575 | russell | 2010-08-10 13:05:07 -0500 (Tue, 10 Aug 2010) | 16 lines
Merged revisions 281574 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
........
r281574 | russell | 2010-08-10 13:04:32 -0500 (Tue, 10 Aug 2010) | 9 lines
Don't move the time threshold for running scheduled events on every iteration.
Instead, only calculate the time threshold each time ast_sched_runq() is called.
(closes issue #17742)
Reported by: schmidts
Patches:
sched.c.patch uploaded by schmidts (license 1077)
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@281576 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Russell Bryant
Tilghman Lesher
Richard Mudgett
David Vossel
Matthew Nicholson
Terry Wilson
Damien Wedhorn
Leif Madsen
Tzafrir Cohen
Jason Parker
Jeff Peeler
