file:///srv/subversion/repos/asterisk/trunk
........
r376219 | jrose | 2012-11-13 13:42:13 -0600 (Tue, 13 Nov 2012) | 12 lines
chan_sip: Add SubscribeContext field to SIPshowpeer AMI response
The new field is will show up within the response if the requested peer has a
subscribe context set.
(closes issue ASTERISK-20626)
Reported by: Jaco Kroon
Patches:
asterisk-sip-ami-SubscrContext.patch uploaded by jkroon (license 5671)
-with modifications by jrose to conform to style guidelines
Review: https://reviewboard.asterisk.org/r/2195/
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/team/mmichelson/threadpool@376224 65c4cc65-6c06-0410-ace0-fbb531ad65f3
file:///srv/subversion/repos/asterisk/trunk
................
r376131 | file | 2012-11-11 11:15:47 -0600 (Sun, 11 Nov 2012) | 16 lines
Remove a fixed size limitation for producing SDP and change how ICE support is disabled by default.
With ICE support enabled in chan_sip and a large number of interfaces on the system it was
possible for the produced SDP to be truncated due to some fixed size buffers. These buffers
have now been changed so they will dynamically grow as needed.
ICE support is now also enabled by default in res_rtp_asterisk to provide a smoother experience
for chan_motif users where it is required. To maintain the previous behavior in chan_sip it is
no longer enabled by default there.
(closes issue ASTERISK-20643)
Reported by: coopvr
........
Merged revisions 376130 from http://svn.asterisk.org/svn/asterisk/branches/11
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/team/mmichelson/threadpool@376136 65c4cc65-6c06-0410-ace0-fbb531ad65f3
file:///srv/subversion/repos/asterisk/trunk
................
r376061 | rmudgett | 2012-11-08 15:12:35 -0600 (Thu, 08 Nov 2012) | 22 lines
chan_dahdi/SS7: Made reject incoming call for an in-alarm or blocked channel.
If a SS7 call comes in requesting a CIC that is in-alarm, the call is
accepted and connects if the extension exists in the dialplan. The call
does not have any audio.
* Made release the call immediately with circuit congestion cause.
(closes issue ASTERISK-20204)
Reported by: Tuan Le
Patches:
jira_asterisk_20204_v1.8.patch (license #5621) patch uploaded by rmudgett
........
Merged revisions 376058 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 376059 from http://svn.asterisk.org/svn/asterisk/branches/10
........
Merged revisions 376060 from http://svn.asterisk.org/svn/asterisk/branches/11
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/team/mmichelson/threadpool@376069 65c4cc65-6c06-0410-ace0-fbb531ad65f3
........
r375993 | mmichelson | 2012-11-07 11:01:13 -0600 (Wed, 07 Nov 2012) | 30 lines
Fix misuses of timeouts throughout the code.
Prior to this change, a common method for determining if a timeout
was reached was to call a function such as ast_waitfor_n() and inspect
the out parameter that told how many milliseconds were left, then use
that as the input to ast_waitfor_n() on the next go-around.
The problem with this is that in some cases, submillisecond timeouts
can occur, resulting in the out parameter not decreasing any. When this
happens thousands of times, the result is that the timeout takes much
longer than intended to be reached. As an example, I had a situation where
a 3 second timeout took multiple days to finally end since most wakeups
from ast_waitfor_n() were under a millisecond.
This patch seeks to fix this pattern throughout the code. Now we log the
time when an operation began and find the difference in wall clock time
between now and when the event started. This means that sub-millisecond timeouts
now cannot play havoc when trying to determine if something has timed out.
Part of this fix also includes changing the function ast_waitfor() so that it
is possible for it to return less than zero when a negative timeout is given
to it. This makes it actually possible to detect errors in ast_waitfor() when
there is no timeout.
(closes issue ASTERISK-20414)
reported by David M. Lee
Review: https://reviewboard.asterisk.org/r/2135/
........
r375994 | mmichelson | 2012-11-07 11:08:44 -0600 (Wed, 07 Nov 2012) | 3 lines
Remove some debugging that accidentally made it in the last commit.
........
Merged revisions 375993-375994 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 375995 from http://svn.asterisk.org/svn/asterisk/branches/10
........
Merged revisions 376014 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@376015 65c4cc65-6c06-0410-ace0-fbb531ad65f3
An issue was reported on the mailing list where calling would result in an "Incomplete
ICE-UDP candidate received on session" error message. This is the result of the ICE-UDP
candidate code not placing a "network" attribute within the candidates. This is now done.
To increase compatibility though I have removed the requirement for the "network" attribute
to exist within ICE-UDP candidates that are received since we don't actually require the
value.
Reported on the mailing list by Jean-Denis Girard.
........
Merged revisions 375925 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@375926 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Currently, if an acknowledgement of a timer fails Asterisk will not realize
that a serious error occurred and will continue attempting to use the timer's
file descriptor. This can lead to situations where errors stream to the
CLI/log file. This consumes significant resources, masks the actual problem
that occurred (whatever caused the timer to fail in the first place), and
can leave channels in odd states.
This patch propagates the errors in the timing resource modules up through
the timer core, and makes users of these timers handle acknowledgement
failures. It also adds some defensive coding around the use of timers
to prevent using bad file descriptors in off nominal code paths.
Note that the patch created by the issue reporter was modified slightly for
this commit and backported to 1.8, as it was originally written for
Asterisk 10.
Review: https://reviewboard.asterisk.org/r/2178/
(issue ASTERISK-20032)
Reported by: Jeremiah Gowdy
patches:
jgowdy-timerfd-6-22-2012.diff uploaded by Jeremiah Gowdy (license 6358)
........
Merged revisions 375893 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 375894 from http://svn.asterisk.org/svn/asterisk/branches/10
........
Merged revisions 375895 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@375896 65c4cc65-6c06-0410-ace0-fbb531ad65f3
........
r375519 | rmudgett | 2012-10-30 16:06:15 -0500 (Tue, 30 Oct 2012) | 11 lines
chan_misdn: Timer primitives must be handled first.
The frm->addr is a different "address space" than the stack/instance
address of other Lx primitives. The test for B channel instance address
could fail.
Patches:
patch01_timers.diff (license #6372) patch uploaded by Guenther Kelleter
JIRA ABE-2888
........
r375520 | rmudgett | 2012-10-30 16:14:58 -0500 (Tue, 30 Oct 2012) | 10 lines
chan_misdn: Free memory in error paths and other memory leaks.
The one line commented with BUG is not easily fixable because there is no
de-init function one can call.
Patches:
patch02_memory.diff (license #6372) patch uploaded by Guenther Kelleter
JIRA ABE-2888
........
r375521 | rmudgett | 2012-10-30 16:38:41 -0500 (Tue, 30 Oct 2012) | 14 lines
chan_misdn: ISDN NT L2 de-establish/establish
* An NT-PTMP cannot de/establish L2 since it doesn't know the TEIs.
* On NT-PTP L2 is started when L1 is finally active in handle_l1.
* L2 deactivation logging cleanup.
* L2 aggregate link status is unknown for NT-PTMP, show as "UNKN".
* Removed unused functions and code for L2 handling.
Patches:
patch03_L2estab.diff (license #6372) patch uploaded by Guenther Kelleter
Modified
JIRA ABE-2888
........
r375522 | rmudgett | 2012-10-30 16:56:14 -0500 (Tue, 30 Oct 2012) | 22 lines
chan_misdn: Fix broken upper_id/lower_id usage.
Sending PH prim via lower_id layer (3 or 1) simply does not work. For TE
(3) it returns an error (len=-6) which is not evaluated by handle_l1(), so
the L1 layer status ends up wrong. Instead PH must be sent via L4, only
then does it reach L1 without an error message.
And NT PH prims only reach L1 when they are sent to layer 2 id.
--> use upper_id to send PH primitives.
* Check for errors in PH_(DE)ACTIVATE | CONFIRM.
* Debug messages are improved.
* The lower_id is now not used for anything, except: Why is lower_id layer
deleted when it wasn't created? I removed this code since it looks very
wrong.
Patches:
patch04_l1activation.diff (license #6372) patch uploaded by Guenther Kelleter
JIRA ABE-2888
........
r375523 | rmudgett | 2012-10-30 17:29:15 -0500 (Tue, 30 Oct 2012) | 31 lines
chan_misdn: Fix loss of B channels if L1 is down.
If you make 2 calls out an NT PTMP port which is not connected to any
phone, the B channel associated with that call becomes unusable until
Asterisk is restarted.
The problem is the EVENT_SETUP is queued when L1 is not up in
misdn_lib_send_event(). If L1 cannot be activated the event won't be
dequeued. It gets even worse when the call is hung up. The queued
EVENT_SETUP will be overwritten by an EVENT_DISCONNECT. The reserved B
channel then will never be freed. If later someone connects a phone to
the port, L1 will eventually activate and the queued EVENT_DISCONNECT is
sent down the stack. However, it is ignored because it is the wrong call
state.
The real fix would be that activation and queueing for a new SETUP is done
by the NT stack. But since it doesn't, the workaround must be removed
because it doesn't always work.
Fix: The event is no longer queued but immediately sent to the stack. If
L1 cannot be activated, the L3 state machine that was started by the
EVENT_SETUP will do its work, i.e. a timeout will release the B channel
properly. The SETUP possibly cannot be sent the first time but is resent
by T303 in case L1 could be activated.
Patches:
patch05_bchan-loss.diff (license #6372) patch uploaded by Guenther Kelleter
Modified
JIRA ABE-2888
........
r375524 | rmudgett | 2012-10-30 18:26:05 -0500 (Tue, 30 Oct 2012) | 13 lines
chan_misdn: Remove some calls to exit().
Try proper cleanup when something goes wrong in misdn_lib_init().
Especially do not call exit()!
* Fix memory leak because stack_destroy() does not free the stack struct.
Patches:
patch06_cleanup-init.diff (license #6372) patch uploaded by Guenther Kelleter
Modified
JIRA ABE-2888
........
Merged revisions 375519-375524 from https://origsvn.digium.com/svn/asterisk/be/branches/C.3-bier
........
Merged revisions 375625 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 375626 from http://svn.asterisk.org/svn/asterisk/branches/10
........
Merged revisions 375627 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@375628 65c4cc65-6c06-0410-ace0-fbb531ad65f3
While looking at some debug logs, I noticed that it was being reported that the
SDP origin line was unsupported or failed. Upon looking into this on my local
machine, I found that I too was getting this debug message yet everything seemed
to be getting processed properly. What was discovered is, that, the variable to
determine what is displayed in the debug message for the SDP line that was
processed, was not being set for the origin line when the result was successful.
This patch fixes this and was tested on local machine.
........
Merged revisions 375594 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 375601 from http://svn.asterisk.org/svn/asterisk/branches/10
........
Merged revisions 375613 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@375614 65c4cc65-6c06-0410-ace0-fbb531ad65f3
A regression was introduced in chan_sip by changes to sip reload introduced by
r349097. That patch moved peer purging from the beginning of the reload to
after the general configuration was finished. This patch fixes that by undoing
the repositioning of the original peer purging code and using a similar
function after performing general configuration that purges only autocreated
peers that were created when persist mode isn't enabled.
(closes issue ASTERISK-20611)
Reported by: Alisher
Review: https://reviewboard.asterisk.org/r/2171/
........
Merged revisions 375575 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@375576 65c4cc65-6c06-0410-ace0-fbb531ad65f3
If a "sip reload" is issued for a SIP peer, then his
IP address will be cleared, thus resulting in forgetting the
public IP address. Asterisk will then attempt to route SIP
traffic to the private IP address.
The fix here is to make "sip reload" ignore realtime peers
when "host = dynamic" is spotted. Realtime peers can now only
have their IP address reset if they have gone from being not
dynamic to being dynamic.
(closes issue ASTERISK-18203)
reported by daren ferreira
(closes issue ASTERISK-20572)
reported by JoshE
Patches:
fix_nat_realtime.diff uploaded by JoshE (license #6075)
........
Merged revisions 375415 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 375417 from http://svn.asterisk.org/svn/asterisk/branches/10
........
Merged revisions 375437 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@375443 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Remove the "RTP Read too short" warning for RTP keepalives. Remove the
the warning about the application delimiter switch from pipe to comma.
(You should've done this by now.) Make cdr_odbc report more when an
insert fails. Make chan_sip warn less when the peer wants SRTP (and we
don't) or sends a zero port to disable a media type.
Review: https://reviewboard.asterisk.org/r/2167
(closes issue ASTERISK-20538)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@375137 65c4cc65-6c06-0410-ace0-fbb531ad65f3
In many cases (for peers behind NAT or for TCP sockets) we do not need
to look up any hostname in the Contact (or Route) when sending an
in-dialog request. This should reduce netsock2.c: getaddrinfo errors in
certain scenarios.
Review: https://reviewboard.asterisk.org/r/2156
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@375110 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Passing an ast_str pointer by value that then calls
ast_str_set(), ast_str_set_va(), ast_str_append(), or
ast_str_append_va() can result in the pointer originally
passed by value being invalidated if the ast_str had
to be reallocated.
This fixes places in the code that do this. Only the
example in ccss.c could result in pointer invalidation
though since the other cases use a stack-allocated ast_str
and cannot be reallocated.
I've also updated the doxygen in strings.h to include
notes about potential misuse of the functions mentioned
previously.
Review: https://reviewboard.asterisk.org/r/2161
........
Merged revisions 375025 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 375026 from http://svn.asterisk.org/svn/asterisk/branches/10
........
Merged revisions 375027 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@375044 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Update and extend the configuration_file group and enable linking. Update title that was left behind many years ago.
(issue ASTERISK-20259)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@375006 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This is used to solve an issue where a poll on a file
descriptor does not necessarily correspond to the readiness
of a FILE handle to be read.
This change makes it so that for TCP connections, we do a
recv() on the file descriptor instead.
Because TCP does not guarantee that an entire message or even
just one single message will arrive during a read, a loop has
been introduced to ensure that we only attempt to handle a
single message at a time. The tcptls_session_instance structure
has also had an overflow buffer added to it so that if more
than one TCP message arrives in one go, there is a place to
throw the excess.
Huge thanks goes out to Walter Doekes for doing extensive review
on this change and finding edge cases where code could fail.
(closes issue ASTERISK-20212)
reported by Phil Ciccone
Review: https://reviewboard.asterisk.org/r/2123
........
Merged revisions 374905 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 374906 from http://svn.asterisk.org/svn/asterisk/branches/10
........
Merged revisions 374914 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@374924 65c4cc65-6c06-0410-ace0-fbb531ad65f3
During testing, it was discovered that having chan_sip
export global symbols was problematic.
The biggest problem was that load order was affected.
Trying to use realtime could be problematic since in
all likelihood the necessary realtime driver(s) would
not be loaded before chan_sip.
In addition, it was found that it was impossible to
use the Digium Phone Module for Asterisk since it
must be loaded before chan_sip since it must hook
into chan_sip's configuration parsing.
The solution is to use a virtual table in the same
manner that other modules in Asterisk do, like
app_voicemail.
(closes issue ASTERISK-20545)
Reported by: kmoore
........
Merged revisions 374842 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@374849 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/be/branches/C.3-bier
................
r374515 | rmudgett | 2012-10-04 17:52:36 -0500 (Thu, 04 Oct 2012) | 10 lines
chan_misdn: Remove some deadcode
* Made setup_bc() static.
Patches:
patch1_unused-code.diff (license #6372) patch uploaded by Guenther Kelleter
Modified
JIRA ABE-2882
................
r374516 | rmudgett | 2012-10-04 18:01:01 -0500 (Thu, 04 Oct 2012) | 7 lines
chan_misdn: Remove unused bchan states
Patches:
patch2_unused-states.diff (license #6372) patch uploaded by Guenther Kelleter
JIRA ABE-2882
................
r374517 | rmudgett | 2012-10-04 18:17:51 -0500 (Thu, 04 Oct 2012) | 16 lines
chan_misdn: Remove unnecessary null pointer checks and checks for stack->nt
* cleanup_bc() is always called with valid bc (or it would've crashed
before).
* Value of stack->nt is known in advance at some places.
* Rename handle_event() to handle_event_te(), handle_frm() to
handle_frm_te().
Patches:
patch3_checks.diff (license #6372) patch uploaded by Guenther Kelleter
Modified
JIRA ABE-2882
................
r374518 | rmudgett | 2012-10-04 18:21:59 -0500 (Thu, 04 Oct 2012) | 7 lines
chan_misdn: Fix spelling in log messages
Patches:
patch4_spelling.diff (license #6372) patch uploaded by Guenther Kelleter
JIRA ABE-2882
................
r374519 | rmudgett | 2012-10-04 18:31:59 -0500 (Thu, 04 Oct 2012) | 15 lines
chan_misdn: Don't cleanup a bc twice.
In handle_frm_te() after calling misdn_lib_send_event(bc,
EVENT_RELEASE_COMPLETE) bc is emptied, cleaned and set not in use,
although misdn_lib_send_event() already did the same. This is bad. When
it's not in use we are not allowed to touch it.
* Moved log message in front of the resulting actions and fixed it to
match the case.
Patches:
patch5_bccleanup.diff (license #6372) patch uploaded by Guenther Kelleter
JIRA ABE-2882
................
r374520 | rmudgett | 2012-10-04 18:43:56 -0500 (Thu, 04 Oct 2012) | 12 lines
chan_misdn: Fix memory leaks, bc, chan not cleaned up etc., really bad stuff.
* Fix return codes of cb_events() for EVENT_SETUP to use caller's cleanup
mechanisms.
* Move cl_queue_chan() call after bearer check.
Patches:
patch6_leaks.diff (license #6372) patch uploaded by Guenther Kelleter
JIRA ABE-2882
................
r374521 | rmudgett | 2012-10-04 18:48:38 -0500 (Thu, 04 Oct 2012) | 11 lines
chan_misdn: We must initialize cause on sending a DISCONNECT.
We must initialize cause on sending a DISCONNECT, so it is later correctly
indicated to ast_channel in case the answer (RELEASE/RELEASE_COMPLETE)
does not include one.
Patches:
patch7_hangupcause.diff (license #6372) patch uploaded by Guenther Kelleter
JIRA ABE-2882
................
r374522 | rmudgett | 2012-10-04 19:03:56 -0500 (Thu, 04 Oct 2012) | 7 lines
chan_misdn: Remove unused code for upqueue
Patches:
patch8_unused-upqueue.diff (license #6372) patch uploaded by Guenther Kelleter
JIRA ABE-2882
................
r374523 | rmudgett | 2012-10-04 19:11:50 -0500 (Thu, 04 Oct 2012) | 7 lines
chan_misdn: Improve debugging (port number, messages fixed, dups removed)
Patches:
patch9_debug.diff (license #6372) patch uploaded by Guenther Kelleter
JIRA ABE-2882
................
r374533 | rmudgett | 2012-10-05 12:17:18 -0500 (Fri, 05 Oct 2012) | 8 lines
chan_misdn: Better debug: we can print_bc_info even if there's no ast leg.
Patches:
patch10_debug-bc-2.diff (license #6372) patch uploaded by Guenther Kelleter
Modified.
JIRA ABE-2882
................
r374534 | rmudgett | 2012-10-05 12:34:10 -0500 (Fri, 05 Oct 2012) | 16 lines
chan_misdn: setup_bc() is called too early for an incoming SETUP on TE.
This prevents the B channel from being setup for HDLC mode when requested
by the bearer capability and config option hdlc=yes. It violates
ETS300102 Ch.5.2.3.2: "The user, in any case, must not connect to the
channel until a CONNECT ACKNOWLEDGE message has been received."
* Call setup_bc() on receipt of CONNECT_ACKNOWLEGDE for PTMP, and on first
response to SETUP for PTP.
Patches:
abe-2881-2.diff (license #6372) patch uploaded by Guenther Kelleter
Modified.
JIRA ABE-2881
................
r374535 | rmudgett | 2012-10-05 12:41:05 -0500 (Fri, 05 Oct 2012) | 2 lines
chan_misdn: Remove some more deadcode.
................
........
Merged revisions 374536 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 374537 from http://svn.asterisk.org/svn/asterisk/branches/10
........
Merged revisions 374538 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@374539 65c4cc65-6c06-0410-ace0-fbb531ad65f3
* The following dialplan applications now recognize 'W' to pause sending
DTMF for one second in addition to the previously existing 'w' that paused
sending DTMF for half a second. Dial, ExternalIVR, and SendDTMF.
* The chan_dahdi analog port dialing and deferred DTMF dialing for PRI now
distinguishes between 'w' and 'W'. The 'w' pauses dialing for half a
second. The 'W' pauses dialing for one second.
* Created dahdi_dial_str() in chan_dahdi that eliminated a lot of
duplicated dialing code and diagnostic messages for the channel driver.
(closes issue ASTERISK-20039)
Reported by: Jeremiah Gowdy
Patches:
jgowdy-wait-6-22-2012.diff (license #5621) patch uploaded by Jeremiah Gowdy
Expanded patch to add support in chan_dahdi.
Tested by: rmudgett
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@374030 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Users of the T.38 API can indicate AST_T38_REQUEST_PARMS on a channel to request that the
channel indicate a T.38 negotiation with the parameters present on the channel. The return
value of this indication is expected to be AST_T38_REQUEST_PARMS upon success but with
chan_local involved this could never occur.
This fix changes chan_local to always return AST_T38_REQUEST_PARMS for this situation. If
the underlying channel technology on the other side does not support T.38 this would have
been determined ahead of time using ast_channel_get_t38_state and an indication would
not occur.
(closes issue ASTERISK-20229)
Reported by: wdoekes
Patches:
ASTERISK-20229.patch uploaded by wdoekes (license 5674)
Review: https://reviewboard.asterisk.org/r/2070/
........
Merged revisions 373705 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 373706 from http://svn.asterisk.org/svn/asterisk/branches/10
........
Merged revisions 373707 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@373708 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This allows for the REDIRECTING dialplan function to be
used to set the reason to any string.
The SIP channel driver has been modified to set the redirecting
reason string to the value received in a Diversion header. In
addition, SIP 480 response reason text will set the redirecting
reason as well.
(closes issue AST-942)
reported by Malcolm Davenport
(closes issue AST-943)
reported by Malcolm Davenport
Review: https://reviewboard.asterisk.org/r/2101
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@373701 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The SIP session timer mechanism contains a mandatory 'refresher' parameter
(included in the Session-Expires header) which is used in the session timer
offer/answer signaling within a SIP Invite dialog. It looks like asterisk is
interpreting the uac resp. uas role only as the initial role of client and
server (caller is uac, callee is uas). The standard rfc 4028 however assigns
the client role to the ((RE)-Invite) requester, the server role to the
((RE)-Invite) responder.
This patch has Asterisk track the actual refresher as "us" or "them" as opposed
to relying on just the configured "uas" or "uac" properties.
(closes issue AST-922)
Reported by: Thomas Airmont
Review: https://reviewboard.asterisk.org/r/2118/
........
Merged revisions 373652 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 373665 from http://svn.asterisk.org/svn/asterisk/branches/10
........
Merged revisions 373690 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@373691 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When setting CALLERID(pres)=unavailable in the dialplan, the From header
in the SIP message contains "Anonymous" <sip:Anonymous@anonymous.invalid>.
For consistency, Asterisk should use a lowercase a in the userpart of the
URI.
* Make the From header use a lowercase A in the userpart of the anonymous
URI.
(closes issue ASTERISK-19838)
Reported by: Antti Yrjola
Patches:
chan_sip_patch_ASTERISK-19838.patch (license #6383) patch uploaded by Antti Yrjola
........
Merged revisions 373500 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 373501 from http://svn.asterisk.org/svn/asterisk/branches/10
........
Merged revisions 373502 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@373503 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Asterisk v1.8 and later was not as vulnerable to this issue.
* Made find_call() lock each private as it processes the found dialogs.
(Primary cause of ABE-2876)
* Made the other functions that traverse the dialogs container lock each
private as it examines them.
* Fix race condition in sip_call() if the thread that sent the INVITE is
held up long enough for a response to be processed. The p->initid for the
INVITE retransmission could be added after it was canceled by the response
processing.
* Made __sip_destroy() clean up resource pointers after freeing. This is
primarily defensive in case someone has a stale private pointer.
* Removed redundant memset() in reqprep(). The call to init_req() already
does the memset() and is the first reference to req in reqprep().
* Removed useless set of req.method in transmit_invite(). The calls to
initreqprep() and reqprep() have to do this because they memset() the req.
JIRA ABE-2876
..........
Merged -r373423 from https://origsvn.digium.com/svn/asterisk/be/branches/C.3-bier
........
Merged revisions 373424 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 373466 from http://svn.asterisk.org/svn/asterisk/branches/10
........
Merged revisions 373469 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@373471 65c4cc65-6c06-0410-ace0-fbb531ad65f3
If conditions were right it was possible for both the PBX core and chan_sip to deadlock by both having a lock that the other
wants. In the case of the PBX core it had the contexts lock and wanted a SIP dialog lock, while in the case of chan_sip it
had the SIP dialog lock and wanted the contexts lock.
This fix unlocks the SIP dialog before getting the extension state so that the other thread will not block on trying to lock
it. Once the extension state is retrieved the SIP dialog is locked again and life carries on.
As the SIP dialog is reference counted it is not possible for it to go away after unlocking.
(closes issue ASTERISK-20437)
Reported by: jhutchins
........
Merged revisions 373438 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 373440 from http://svn.asterisk.org/svn/asterisk/branches/10
........
Merged revisions 373454 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@373456 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The H.264 format attribute module compares two format attribute structures to determine if they are
compatible or not. In some instances it was possible for this check to determine that both structures
were incompatible when they actually should be considered compatible. This check has now been made even
more permissive by assuming that if no attribute information is available the two structures are compatible.
If both structures contain attribute information a base level comparison of the H.264 IDC value is done to
see if they are compatible or not.
The above issue uncovered a secondary issue in chan_sip where the SDP being produced would be incorrect if
the formats were considered incompatible. This has now been fixed by checking that all information required
to produce the SDP is available instead of assuming it is.
(closes issue ASTERISK-20464)
Reported by: Leif Madsen
........
Merged revisions 373413 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@373414 65c4cc65-6c06-0410-ace0-fbb531ad65f3
* Whitespace, doc-blocks, spelling, case, missing and incorrect tags.
* Add cleanup to Makefile for the Doxygen configuration update
* Start updating Doxygen configuration for cleaner output
* Enable inclusion of configuration files into documentation
* remove mantisworkflow...
* update documentation README
* Add markup to Tilghman's email and talk with him about updating his email, he knows...
* no code changes on this commit other than the mentioned Makefile change
(issue ASTERISK-20259)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@373384 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Doxygen updates including mistakes, misspellings, missing parameters, updates for Doxygen style. Some missing txt file links are removed but their content or essense will be included in some later updates. A majority of the txt files were removed in the 1.6 era but never noted. The HR and EXTREF are simple changes that make the documentation more compatable with more versions of Doxygen.
Further updates coming.
(issue ASTERISK-20259)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@373330 65c4cc65-6c06-0410-ace0-fbb531ad65f3
As mentioned on the review for this, WebRTC has moved towards choosing
DTLS-SRTP as the mechanism for key exchange for SRTP. This commit adds
support for this but makes it available for normal SIP clients as well.
Testing has been done to ensure that this introduces no regressions with
existing behavior and also that it functions as expected.
Review: https://reviewboard.asterisk.org/r/2113/
........
Merged revisions 373229 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@373234 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Automerge script
Mark Michelson
Joshua Colp
Matthew Jordan
Damien Wedhorn
Richard Mudgett
Michael L. Young
Jonathan Rose
Walter Doekes
Igor Goncharovskiy
Andrew Latham
Terry Wilson