This introduces the ability for PJSIP code to specify filtering flags
when retrieving PJSIP contacts. The first flag for use causes the
query code to only retrieve contacts that are not unreachable. This
change has been leveraged by both the Dial() process and the
PJSIP_DIAL_CONTACTS dialplan function so they will now only attempt
calls to contacts which are not unreachable.
ASTERISK-26281
Change-Id: I8233b4faa21ba3db114f5a42e946e4b191446f6c
Retransmissions of an initial INVITE could be queued in the serializer
before we have processed the first INVITE message. If the first INVITE
message doesn't get completely processed before the retransmissions are
seen then we could try to setup the same call from the retransmissions. A
symptom of this is seeing a (key exists) message associated with an
INVITE. An earlier change attempted to address this kind of problem by
calculating a distributor serializer to use for unassociated messages.
Part of that change also made incoming calls keep using that distributor
serializer. (ASTERISK-26088) However, some leftover code was still
deferring the INVITE processing to the session's serializer even though we
were already in that serializer. This not only is unnecessary but would
cause the same call resetup problem.
* Removed the code to defer processing the initial INVITE to the session's
serializer because we are already running in that serializer.
ASTERISK-26998 #close
Change-Id: I1e822d82dcc650e508bc2d40d545d5de4f3421f6
If you use ast_request to create a PJSIP channel but then hang it
up without causing a transaction to be sent, the session will
never be destroyed. This is due ot the fact that it's pjproject
that triggers the session cleanup when the transaction ends.
app_chanisavail was doing this to get more granular channel state
and it's also possible for this to happen via ARI.
* ast_sip_session_terminate was modified to explicitly call the
cleanup tasks and unreference session if the invite state is NULL
AND invite_tsx is NULL (meaning we never sent a transaction).
* chan_pjsip/hangup was modified to bump session before it calls
ast_sip_session_terminate to insure that session stays valid
while it does its own cleanup.
* Added test events to session_destructor for a future testsuite
test.
ASTERISK-26908 #close
Reported-by: Richard Mudgett
Change-Id: I52daf6f757184e5544c261f64f6fe9602c4680a9
If ICE is enabled and a STUN server does not respond then we will block
until we give up on the STUN response. This will take nine seconds. In
the mean time the peer that sent the INVITE will send retransmissions.
* Restructure res_pjsip_session.c:new_invite() to send a 100 Trying out
earlier to prevent these retransmissions.
ASTERISK-26890
Change-Id: Ie3fc611e53a0eff6586ad55e4aacad81cf6319a8
* Restructure ast_sip_session_alloc() to need less cleanup on off nominal
error paths.
* Made ast_sip_session_alloc() and ast_sip_session_create_outgoing() avoid
unnecessary ref manipulation to return a session. This is faster than
calling a function. That function may do logging of the ref changes with
REF_DEBUG enabled.
Change-Id: I2a0affc4be51013d3f0485782c96b8fee3ddb00a
It is perfectly acceptable for a BYE to be sent on a disconnected
session. This occurs when we respond to a challenge to the BYE
for authentication credentials.
ASTERISK-26363
Change-Id: I6ef0ddece812fea6665a1dd2549ef44fb9d90045
Support for RFC3578 overlap dialling (i.e. 484 Response to partially matched
destinations) as currently provided by chan_sip is missing from res_pjsip.
This patch adds a new endpoint attribute (allow_overlap) [defaults to yes]
which when set to yes enables 484 responses to partial destination
matches rather than the current 404.
ASTERISK-26864
Change-Id: Iea444da3ee7c7d4f1fde1d01d138a3d7b0fe40f6
If local_net is not defined on a transport, transport_state->localnet
will be NULL. ast_apply_ha will, be default, return AST_SENSE_ALLOW in
this case, causing the external_media_address, if set, to be skipped.
This patch causes us to only check if we are sending within a network if
local_net is defined.
ASTERISK-26879 #close
Change-Id: Ib661c31a954cabc9c99f1f25c9c9a5c5b82cbbfb
A new transport parameter 'symmetric_transport' has been added.
When a request from a dynamic contact comes in on a transport with
this option set to 'yes', the transport name will be saved and used
for subsequent outgoing requests like OPTIONS, NOTIFY and INVITE.
It's saved as a contact uri parameter named 'x-ast-txp' and will
display with the contact uri in CLI, AMI, and ARI output. On the
outgoing request, if a transport wasn't explicitly set on the
endpoint AND the request URI is not a hostname, the saved transport
will be used and the 'x-ast-txp' parameter stripped from the
outgoing packet.
* config_transport was modified to accept and store the new parameter.
* config_transport/transport_apply was updated to store the transport
name in the pjsip_transport->info field using the pjsip_transport->pool
on UDP transports.
* A 'multihomed_on_rx_message' function was added to
pjsip_message_ip_updater that, for incoming requests, retrieves the
transport name from pjsip_transport->info and retrieves the transport.
If transport->symmetric_transport is set, an 'x-ast-txp' uri parameter
containing the transport name is added to the incoming Contact header.
* An 'ast_sip_get_transport_name' function was added to res_pjsip.
It takes an ast_sip_endpoint and a pjsip_sip_uri and returns a
transport name if endpoint->transport is set or if there's an
'x-ast-txp' parameter on the uri and the uri host is an ipv4 or
ipv6 address. Otherwise it returns NULL.
* An 'ast_sip_dlg_set_transport' function was added to res_pjsip
which takes an ast_sip_endpoint, a pjsip_dialog, and an optional
pjsip_tpselector. It calls ast_sip_get_transport_name() and if
a non-NULL is returned, sets the selector and sets the transport
on the dialog. If a selector was passed in, it's updated.
* res_pjsip/ast_sip_create_dialog_uac and ast_sip_create_dialog_uas
were modified to call ast_sip_dlg_set_transport() instead of their
original logic.
* res_pjsip/create_out_of_dialog_request was modified to call
ast_sip_get_transport_name() and pjsip_tx_data_set_transport()
instead of its original logic.
* Existing transport logic was removed from endpt_send_request
since that can only be called after a create_out_of_dialog_request.
* res_pjsip/ast_sip_create_rdata was converted to a wrapper around
a new 'ast_sip_create_rdata_with_contact' function which allows
a contact_uri to be specified in addition to the existing
parameters. (See below)
* res_pjsip_pubsub/internal_pjsip_evsub_send_request was eliminated
since all it did was transport selection and that is now done in
ast_sip_create_dialog_uac and ast_sip_create_dialog_uas.
* 'contact_uri' was added to subscription_persistence. This was
necessary because although the parsed rdata contact header has the
x-ast-txp parameter added (if appropriate),
subscription_persistence_update stores the raw packet which
doesn't have it. subscription_persistence_recreate was then
updated to call ast_sip_create_rdata_with_contact with the
persisted contact_uri so the recreated subscription has the
correct transport info to send the NOTIFYs.
* res_pjsip_session/internal_pjsip_inv_send_msg was eliminated since
all it did was transport selection and that is now done in
ast_sip_create_dialog_uac.
* pjsip_message_ip_updater/multihomed_on_tx_message was updated
to remove all traces of the x-ast-txp parameter from the
outgoing headers.
NOTE: This change does NOT modify the behavior of permanent
contacts specified on an aor. To do so would require that the
permanent contact's contact uri be updated with the x-ast-txp
parameter and the aor sorcery object updated. If we need to
persue this, we need to think about cloning permanent contacts into
the same store as the dynamic ones on an aor load so they can be
updated without disturbing the originally configured value.
You CAN add the x-ast-txp parameter to a permanent contact's uri
but it would be much simpler to just set endpoint->transport.
Change-Id: I4ee1f51473da32ca54b877cd158523efcef9655f
This feature was available in the SIP channel driver chan_sip. For example,
Asterisk is the outbound proxy and has to handle all SIP-URIs, even domains not
local to Asterisk. In that case, SIPDOMAIN is used in the Dialplan, to detect
and dial remote SIP-URIs. This change here sets the SIP destination domain of
an inbound call (SIPDOMAIN) in the SIP channel driver res_pjsip as well.
ASTERISK-26670 #close
Change-Id: I27c880dc404a3c1c6792e1ba3545475339577243
res_pjsip_sesssion was hooking into transaction and invite state
changes. One of the reasons for doing so was due to the
PJSIP_EVENT_TX_MSG event. The idea was that we were hooking into the
message sending process, and so we should call session supplements to
alter the outgoing message.
In reality, this event was meant to indicate that the message either
a) had already been sent, or
b) required a DNS lookup and would be sent when the DNS query
completed.
In case (a), this meant we were altering an already-sent
request/response for no reason. In case (b), this potentially meant we
could be trying to alter a request/response at the same time that the
DNS resolution completed. In this case, it meant we might be stomping on
memory being used by the thread actually sending the message. This
caused potential crashes and memory corruption.
This patch removes the calls to session supplements from the case where
the PJSIP_EVENT_TX_MSG event occurs. In all of these cases, trying to
alter the message at this point is too late, and it can cause nothing
but harm to try to do it. Because there were no longer any calls to the
handle_outgoing() function, it has been removed.
Change-Id: Ibcc223fb1c3a237927f38754e0429e80ee301e92
This implements the chan_sip legacy_useroption_parsing option but with a
better name.
* Made the caller-id number and redirecting number strings obtained from
incoming SIP URI user fields always truncated at the first semicolon.
People don't care about anything after the semicolon showing up on their
displays even though the RFC allows the semicolon.
ASTERISK-26316 #close
Reported by: Kevin Harwell
Change-Id: Ib42b0e940dd34d84c7b14bc2e90d1ba392624f62
This patch add config to pjsip by endpoint.
;preferred_codec_only=yes
; Respond to a SIP invite with the single most preferred codec
; rather than advertising all joint codec capabilities. This
; limits the other side's codec choice to exactly what we prefer.
ASTERISK-26317 #close
Reported by: AaronAn
Tested by: AaronAn
Change-Id: Iad04dc55055403bbf5ec050997aee2dadc4f0762
On heavy loaded system the TCP/TLS incoming calls could be
disconnected by pjproject while these calls are being
processed by asterisk which could use the session's memory pools.
If the session in the disconnected state then the session memory
pools were already freed, so we get segfault.
This patch adds a lifetime control on an INVITE session to pjproject.
The lifetime of the session is manipulated by calling
pjsip_inv_add_ref/pjsip_inv_dec_ref.
This patch uses these functions to inform pjproject that the
session is in use.
This patch adds check if the session state is not disconnected
and also checks if the memory pool is not NULL.
This patch also places tasks 'session_end' and 'session_end_completion'
into session's serializer to avoid race condition.
ASTERISK-26291 #close
Change-Id: I4d28b1fb3b91f0492a911d110049d670fdc3c8d7
Commit 1b666549f3 broke the srv failover
functionality if a TCP connection gets disconnected. Under these
conditions, session_inv_on_state_changed() gets a
PJSIP_EVENT_TRANSPORT_ERROR and restarts the INVITE transaction on a new
transport. Unfortunately, session_inv_on_tsx_state_changed() also gets
the same PJSIP_EVENT_TRANSPORT_ERROR event and unconditionally terminates
the session.
* Made session_inv_on_tsx_state_changed() complete terminating the session
on PJSIP_EVENT_TRANSPORT_ERROR only if the session state is still
PJSIP_INV_STATE_DISCONNECTED.
ASTERISK-26305 #close
Reported by: Richard Mudgett
Change-Id: If736e766b5c55b970fa38ca6c8a885caf27b897d
If both channels which should be masqueraded
are in the same serializer:
1st channel will be locked waiting condition 'complete'
2nd channel will be locked waiting condition 'suspended'
On heavy load system a chance that both channels will be in
the same serializer 'pjsip/distibutor' is very high.
To reproduce compile res_pjsip/pjsip_distributor.c with
DISTRIBUTOR_POOL_SIZE=1
Steps to reproduce:
1. Party A calls Party B (bridged call 'AB')
2. Party B places Party A on hold
3. Party B calls Voicemail app (non-bridged call 'BV')
4. Party B attended transfers Party A to voicemail using REFER.
5. When asterisk masquerades calls 'AB' and 'BV',
a deadlock is happened.
This patch adds a suspension indicator to the taskprocessor.
When a session suspends/unsuspends the serializer
it sets the indicator to the appropriate state.
The session checks the suspension indicator before
suspend the serializer.
ASTERISK-26145 #close
Change-Id: Iaaebee60013a58c942ba47b1b4930a63e686663b
It is possible in a hypothetical situation for a session refresh to be
invoked on a PJSIP when the negotiatior on the INVITE session has not
yet been established. While this shouldn't occur with existing uses of
ast_sip_session_refresh, the crashes that occur due to improperly
calling PJSIP functions that expect a non-NULL negotiatior are
avoidable. PJSIP will create the negotiator in pjsip_inv_reinvite; this
means that simply checking for the presence of the negotiator before
passing it to other PJSIP functions that use it is allowable. As such,
this patch adds checks for the presence of the negotiator before calling
PJSIP functions that assume it is non-NULL.
Change-Id: I1028323e7e01b0a531865e5412a71b6f6ec4276d
When an answer SDP is invalid we were disconnecting the outgoing call and
sending two BYE requests. The first BYE was sent by PJPROJECT because of
the invalid SDP answer. The second BYE was sent by Asterisk because it
thought the canceled call was the result of the RFC5407 section 3.1.2 race
condition.
* Made not send the BYE on a canceled session if the SDP negotiation is
incomplete because PJPROJECT has already sent a BYE for the failed
negotiation.
ASTERISK-25772 #close
Reported by: Dmitriy Serov
Change-Id: I44ad0bd0605e8eeb7035c890d6f97a1331f1a836
When an incoming call defers SDP negotiation and then sends us an invalid
SDP in the ACK, we need to send a BYE to disconnect the call. In this
case SDP negotiation has failed and we don't have valid media streams
negotiated.
ASTERISK-25772
Change-Id: Ia358516b0fc1e6c4c139b78246f10b9da7a2dfb8
pjsip_inv_end_session() is documented as being able to return the
passed in tdata parameter set to NULL on success.
Change-Id: I09d53725c49b7183c41bfa1be3ff225f3a8d3047
When shutting down res_pjsip_session will get unloaded before res_pjsip.
The act of unloading unregisters all the PJSIP services and sets
their module IDs to -1. In some cases it is possible for a timer to
occur after this happens which calls into res_pjsip_session. The
res_pjsip_session module can then try to get the session from the
INVITE session using the module ID. Since the module ID is now -1
this fails.
This change stores a copy of the module ID and uses it for the timer
callback scenario. If the module ID is -1 the callback immediately
returns but if the module ID is valid then it continues as normal.
This works as the original ID of the module is guaranteed to still
be valid when used with the INVITE session.
ASTERISK-26127 #close
Change-Id: I88df72525c4e9ef9f19c13aedddd3ac4a335c573
We must continue using the serializer that the original INVITE came in on
for the dialog. There may be retransmissions already enqueued in the
original serializer that can result in reentrancy and message sequencing
problems.
Outgoing call legs create the pjsip/outsess/<endpoint> serializers for
their dialogs.
ASTERISK-26088
Reported by: Richard Mudgett
Change-Id: I24d7948749c582b8045d5389ba3f6588508adbbc
Some SIP devices indicate hold/unhold using deferred SDP reinvites. In
other words, they provide no SDP in the reinvite.
A typical transaction that starts hold might look something like this:
* Device sends reinvite with no SDP
* Asterisk sends 200 OK with SDP indicating sendrecv on streams.
* Device sends ACK with SDP indicating sendonly on streams.
At this point, PJMedia's SDP negotiator saves Asterisk's local state as
being recvonly.
Now, when the device attempts to unhold, it again uses a deferred SDP
reinvite, so we end up doing the following:
* Device sends reinvite with no SDP
* Asterisk sends 200 OK with SDP indicating recvonly on streams
* Device sends ACK with SDP indicating sendonly on streams
The problem here is that Asterisk offered recvonly, and by RFC 3264's
rules, if an offer is recvonly, the answer has to be sendonly. The
result is that the device is not taken off hold.
What is supposed to happen is that Asterisk should indicate sendrecv in
the 200 OK that it sends. This way, the device has the freedom to
indicate sendrecv if it wants the stream taken off hold, or it can
continue to respond with sendonly if the purpose of the reinvite was
something else (like a session timer refresher).
The fix here is to alter the SDP negotiator's state when we receive a
reinvite with no SDP. If the negotiator's state is currently in the
recvonly or inactive state, then we alter our local state to be
sendrecv. This way, we allow the device to indicate the stream state as
desired.
ASTERISK-25854 #close
Reported by Robert McGilvray
Change-Id: I7615737276165eef3a593038413d936247dcc6ed
Per RFC3325, the 'From' header is now anonymized on outgoing calls when
caller id presentation is prohibited.
TID = trust_id_outbound
PRO = Set(CALLERID(pres)=prohib)
USR = endpoint/from_user
DOM = endpoint/from_domain
PAI = YES(privacy=off), NO(not sent), PRI(privacy=full) (assumes send_pai=yes)
Conditions |Result
--------------------|----------------------------------------------------
TID PRO USR DOM |PAI FROM
--------------------|----------------------------------------------------
Y Y abc def.ghi |PRI "Anonymous" <sip:abc@def.ghi>
Y Y abc |PRI "Anonymous" <sip:abc@anonymous.invalid>
Y Y def.ghi |PRI "Anonymous" <sip:anonymous@def.ghi>
Y Y |PRI "Anonymous" <sip:anonymous@anonymous.invalid>
Y N abc def.ghi |YES <sip:abc@def.ghi>
Y N abc |YES <sip:abc@<ip_address>>
Y N def.ghi |YES "Caller Name" <sip:<caller_exten>@def.ghi>
Y N |YES "Caller Name" <sip:<caller_exten>@<ip_address>>
N Y abc def.ghi |NO "Anonymous" <sip:abc@def.ghi>
N Y abc |NO "Anonymous" <sip:abc@anonymous.invalid>
N Y def.ghi |NO "Anonymous" <sip:anonymous@def.ghi>
N Y |NO "Anonymous" <sip:anonymous@anonymous.invalid>
N N abc def.ghi |YES <sip:abc@def.ghi>
N N abc |YES <sip:abc@<ip_address>>
N N def.ghi |YES "Caller Name" <sip:<caller_exten>@def.ghi>
N N |YES "Caller Name" <sip:<caller_exten>@<ip_address>>
ASTERISK-25791 #close
Reported-by: Anthony Messina
Change-Id: I2c82a5ca1413c2c00fb62ea95b0ae8e97af54dc9
The 'reload' mechanism actually involves closing the underlying
socket and calling the appropriate udp, tcp or tls start functions
again. Only outbound_registration, pubsub and session needed work
to reset the transport before sending requests to insure that the
pjsip transport didn't get pulled out from under them.
In my testing, no calls were dropped when a transport was changed
for any of the 3 transport types even if ip addresses or ports were
changed. To be on the safe side however, a new transport option was
added (allow_reload) which defaults to 'no'. Unless it's explicitly
set to 'yes' for a transport, changes to that transport will be ignored
on a reload of res_pjsip. This should preserve the current behavior.
Change-Id: I5e759850e25958117d4c02f62ceb7244d7ec9edf
Attempting to load a transport from realtime was forcing asterisk into an
infinite recursion loop. The first thing transport_apply did was to do a
sorcery retrieve by id for an existing transport of the same name. For files,
this just returns the previous object from res_sorcery_config's internal
container, if any. For realtime, the res_sourcery_realtime driver looks in the
database and finds the existing row but now it has to rehydrate it into a
sorcery object which means calling... transport_apply. And so it goes.
The main issue with loading from realtime (apart from the loop) was that
transport stores structures and pointers directly in the ast_sip_transport
structure instead of the separate ast_transport_state structure. This patch
separates those items into the ast_sip_transport_state structure. The pattern
is roughly the same as res_pjsip_outbound_registration.
Although all current usages of ast_sip_transport and ast_sip_transport_state
were modified to use the new ast_sip_get_transport_state API, the original
items are left in ast_sip_transport and kept updated to maintain ABI
compatability for third-party modules. They are marked as deprecated and
noted that they're now in ast_sip_transport_state.
ASTERISK-25606 #close
Reported-by: Martin Moučka
Change-Id: Ic7a836ea8e786e8def51fe3f8cce855ea54f5f19
Make certain that the pjsip session has not failed to
allocate the format capabilities structure, which can
otherwise cause a crash when referenced.
ASTERISK-25323
Change-Id: I602790ba12714741165e441cc64a3ecde4cb5750
The keepalive support in res_pjsip_sdp_rtp currently assumes
that a stream will only be negotiated once. This is false.
If the stream is replaced and later added back it can be
negotiated again causing multiple keepalive scheduled items
to exist. This change explicitly deletes the existing
keepalive scheduled item before adding the new one.
The res_pjsip_sdp_rtp module also does not stop RTP
keepalives or timeout timer if the stream has been
replaced. This change adds a callback to the session media
interface to allow a media stream to be stopped without
the resources being destroyed. This allows the scheduled
items and RTP to be stopped when the stream no longer
exists.
ASTERISK-25356 #close
Change-Id: Ibe6a7cc0927c87326fd5f1c0d4ad889dbfbea1de
When a BYE request is received the PJSIP invite session implementation
creates and sends a 200 OK response before we are aware of it. This
causes the INVITE session state callback to be called into and ultimately
the session supplements run on the BYE request. Once this response has
been sent the normal transaction state callback is invoked which
invokes the session supplements on the BYE request again. This can
be problematic in particular with res_pjsip_rfc3326 as it may
attempt to update the hangup cause code on the channel while it is
in the process of being hung up.
This change makes it so the session supplements are only invoked
once by the INVITE session state callback.
ASTERISK-25318 #close
Change-Id: I69c17df55ccbb61ef779ac38cc8c6b411376c19a
Modules commonly used the pj_gethostip function for retrieving the
IP address of the host. This function does not cache the result and may
result in a DNS lookup occurring, or additional work. If the DNS
server is unreachable or network issues arise this can cause the
pj_gethostip function to block for a period of time.
This change adds an ast_sip_get_host_ip and ast_sip_get_host_ip_string
function which does the same thing but caches the host IP address at
module load time. This results in no additional work being done each
time the local host IP address is needed.
ASTERISK-25342 #close
Change-Id: I3205deb679b01fa5ac05a94b623bfd620a2abe1e
Two testsuite tests crashed in the same place as a result of an INVITE
being CANCELed.
tests/channels/pjsip/resolver/srv/failover/in_dialog/transport_unspecified
tests/channels/pjsip/resolver/srv/failover/in_dialog/transport_tcp
The session pointer is no longer in the inv->mod_data[session_module.id]
location because the INVITE transaction has reached the terminated state.
ASTERISK-25297 #close
Reported by: Richard Mudgett
Change-Id: Idb75fdca0321f5447d5dac737a632a5f03614427
This change adds support for the 'rtp_timeout' and 'rtp_timeout_hold'
endpoint options. These allow the channel to be hung up if RTP
is not received from the remote endpoint for a specified number of
seconds.
ASTERISK-25259 #close
Change-Id: I3f39daaa7da2596b5022737b77799d16204175b9
This adds an "rtp_keepalive" option for PJSIP endpoints. Similar to the
chan_sip option, this specifies an interval, in seconds, at which we
will send RTP comfort noise frames. This can be useful for keeping RTP
sessions alive as well as keeping NAT associations alive during lulls.
ASTERISK-25242 #close
Reported by Mark Michelson
Change-Id: I3b9903d99e35fe5d0b53ecc46df82c750776bc8d
The crash fix for ASTERISK-25183 backported some code from master to try
to make sure that a BYE response is processed by the same serializer used
by the BYE request. The identified race condition causing that backport
was the BYE request code had not finished processing after sending the BYE
before the BYE response came in for processing under a different thread.
Unfortunately, there is still a race condition. Now the race condition is
between destroying the call session's serializer in
ast_taskprocessor_unreference() and using ast_taskprocessor_get() to get a
reference to the serializer for a BYE response. Even worse, the new race
condition is a design limitation of the taskprocessor implementation that
didn't matter in versions before v12. Back then, taskprocessors were only
destroyed when a module unloaded. Now res_pjsip can destroy them when a
call ends.
However, as noted on the ASTERISK-25183 commit,
session_inv_on_state_changed() is disassociating the dialog from the
session when the invite dialog state becomes PJSIP_INV_STATE_DISCONNECTED.
This is a tad too soon because our BYE request transaction has not
completed yet.
* Split session_end() that is called by session_inv_on_state_changed() to
hold off session destruction until the BYE transaction timeout occurs or a
failed initial INVITE transaction timeout occurs in
session_inv_on_tsx_state_changed().
ASTERISK-25201 #close
Reported by: Matt Jordan
Change-Id: Iaf8dc8485fd8392a2a3ee4ad3b7f7f04a0dcc961
When a caller calls a FAX number and then hangs up right after the call is
answered then the T.38 re-INVITE automatic reject timer may still be
running after the channel goes away.
* Added session NULL channel checks on the code paths that get executed by
t38_automatic_reject() to prevent a crash when the T.38 re-INVITE
automatic reject timer expires.
ASTERISK-25168
Reported by: Carl Fortin
Change-Id: I07b6cd23815aedce5044f8f32543779e2f7a2403
Previously Asterisk did not properly failover to the next resolved DNS
address when a endpoint could not be reached. With this patch, and while
using res_pjsip, SIP requests (both in/out of dialog) now attempt to use
the next address in the list of resolved addresses until a proper response
is received or no more addresses are left.
ASTERISK-25076 #close
Reported by: Joshua Colp
Change-Id: Ief14f4ebd82474881f72f4538f4577f30af2a764
It is possible to receive incoming requests or responses after the channel
on an ast_sip_session has been destroyed and NULLed out. Handlers of these
sorts of requests or responses need to be prepared for the possibility
that the channel is NULL or else they could cause a crash.
While several places have been amended to deal with NULL channels, there
were still a couple of places that needed updating.
res_pjsip_dtmf_info.c: When handling incoming INFO requests, we need to
return early if there is no channel on the session.
res_pjsip_session.c: When handling a 302 response, we need to stop the
redirecting attempt if there is no channel on the session.
ASTERISK-25148 #close
reported by Mark Michelson
Change-Id: Id1a75ffc3d0eaa168b0b28188fb54d6cf9fc47a9