Channel snapshots have string representations of the channel's native formats.
Prior to this change, the format strings were re-created on ever channel snapshot
creation. Since channel native formats rarely change, this was very wasteful.
Now, string representations of formats may optionally be stored on the ast_format_cap
for cases where string representations may be requested frequently. When formats
are altered, the string cache is marked as invalid. When strings are requested, the
cache validity is checked. If the cache is valid, then the cached strings are copied.
If the cache is invalid, then the string cache is rebuilt and copied, and the cache
is marked as being valid again.
Review: https://reviewboard.asterisk.org/r/2879
........
Merged revisions 400356 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@400363 65c4cc65-6c06-0410-ace0-fbb531ad65f3
These refleaks were causing bridged calls not to close their RTP ports. Thus
a call would leave open 4 ports (RTP for party A, RTCP for party A, RTP for party
B, and RTCP for party B). This led to an eventual depletion of available RTP
ports.
........
Merged revisions 399924 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@399925 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Issuing hold/unhold would lead to odd behavior. Between two chan_sip devices,
a hold could cause an endless chain of updates while with pjsip a similar chain
would begin but then end somewhat randomly. This patch fixes that by no longer
tweaking the RTP glue on both sides of the call for every
HOLD/UNHOLD/UPDATE_RTP_PEER frame.
(issue ASTERISK-22217)
Reported by: Matt Jordan
Review: https://reviewboard.asterisk.org/r/2794/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@397578 65c4cc65-6c06-0410-ace0-fbb531ad65f3
DTMF start/end and hold/unhold events have state because a DTMF begin
event and hold event must be ended by something.
The following cases need to be handled when a channel is moved around in
the system.
* When a channel leaves a bridge it may owe a DTMF end event to the
bridge.
* When a channel leaves a bridge it may owe an UNHOLD event to the bridge.
(This case is explicitly ignored because things like transfers need
explicit control over this.)
* When a channel leaves the bridging system it may need to simulate a DTMF
end event to the channel.
* When a channel leaves the bridging system it may need to simulate an
UNHOLD event to the channel.
The patch also fixes the following:
* Fixes playing a file and restarting MOH using the latest MOH class used.
(closes issue ASTERISK-22043)
Reported by: Matt Jordan
Review: https://reviewboard.asterisk.org/r/2791/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@397577 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The cause code needs to be passed from the disconnecting channel to the
bridge peers if the disconnecting channel dissolves the bridge.
* Made the call to an app_agent_pool agent disconnect with the busy cause
code if the agent does not ack the call in time or hangs up before acking
the call.
(closes issue ASTERISK-22042)
Reported by: Matt Jordan
Review: https://reviewboard.asterisk.org/r/2772/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@397472 65c4cc65-6c06-0410-ace0-fbb531ad65f3
* Added an option flags parameter to interval hooks. Interval hooks now
can specify if the callback will affect the media path or not.
* Added an option flags parameter to the bridge action custom callback.
The action callback now can specify if the callback will affect the media
path or not.
* Made the holding bridge technology reexamine the participant idle mode
option whenever the entertainment is restarted.
* Fixed app_agent_pool waiting agents needlessly starting and stopping MOH
every second by specifying the heartbeat interval hook as not affecting
the media path.
* Fixed app_agent_pool agent alert from restarting the MOH after the alert
beep. The agent entertainment is now changed from MOH to silence after
the alert beep.
* Fixed holding bridge technology to defer starting the entertainment. It
was previously a mixture of immediate and deferred.
* Fixed holding bridge technology to immediately stop the entertainment.
It was previously a mixture of immediate and deferred. If the channel
left the bridging system, any deferred stopping was discarded before
taking effect.
* Miscellaneous holding bridge technology rework coding improvements.
Review: https://reviewboard.asterisk.org/r/2761/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@397294 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Suspend and unsuspend callbacks are added to the holding bridge so
that entertainment can be disabled and re-enabled when operations
would suspend a channel on the bridge (such as playback operations).
This fixes entertainment so that when those operations end, the
entertainment can pick back up and it also serves as an optimization.
Also, this patch fixes a bug caused by triggering ringing frames
immediately instead of pushing them to the queue which created a race
condition where sometimes parking with ringing during attended
transfers would cause the ringing to be interrupted by an unhold
frame.
(closes issue ASTERISK-22006)
Reported by: Matt Jordan
Review: https://reviewboard.asterisk.org/r/2711/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@396189 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Most hook callbacks did not need the bridge parameter. The pointer value
could become invalid if the channel is moved to another bridge while it is
executing.
* Fixed some issues in feature_attended_transfer() as a result.
* Reduce the bridge inhibit count in
attended_transfer_properties_shutdown() after it has restored the bridge
channel hooks.
* Removed basic bridge requirement on feature_blind_transfer(). It does
not require the basic bridge like feature_attended_transfer().
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@395574 65c4cc65-6c06-0410-ace0-fbb531ad65f3
* Fixed feature limits to not use special members of struct
ast_bridge_features.
* Fixed memory leak in off nominal paths of bridge_builtin_set_limits().
* Fixed off nominal path in ast_bridge_features_limits_construct() freeing
unallocated memory if it was not called by bridge_builtin_set_limits().
* Made bridge_builtin_interval_features.so unloadable.
* Simplified parking's use of its duration interval hook.
* Made BridgeWait S option not depend upon another module being loaded.
(closes issue ASTERISK-22107)
Reported by: Matt Jordan
Review: https://reviewboard.asterisk.org/r/2701/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@395559 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch renames the bridging* files to bridge*. This may seem pedantic
and silly, but it fits better in line with current Asterisk naming conventions:
* channel is not "channeling"
* monitor is not "monitoring"
etc.
A bridge is an object. It is a first class citizen in Asterisk. "Bridging" is
the act of using a bridge on a set of channels - and the API that fulfills that
role is more than just the action.
(closes issue ASTERISK-22130)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@395378 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch does the following:
* It pulls out bridge_channel and puts it into its own translation unit
* It adds public and protected headers for bridging_channel. Protected
functions are appropriate only for the Bridging API and sub-classes of a
bridge.
(issue ASTERISK-22130)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@395253 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Created a native_dahdi bridging technology for use with the new bridging
API.
The new bridging technology is part of the chan_dahdi channel driver
because it is very specific to that driver. Rather than include the new
code directly into chan_dahdi.c the new bridge technology is in its own
file and linked into chan_dahdi.so. A large part of this change is the
mechanical process of moving declarations around so chan_dahdi.c can be
split up into more files later.
* Changed the bridging core to pass NULL frames into the channel
technologies instead of discarding them. The channel technologies may
need the proding to determine if their configuration is still valid.
(closes issue ASTERISK-21886)
Reported by: Matt Jordan
Review: https://reviewboard.asterisk.org/r/2681/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@395154 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This greatly modifies the operation of DTMF attended transfers so that
the full range of options from features.conf applies.
In addition, a new option has been added that allows for a transferer
to switch between bridges during a transfer before completing the
transfer.
(closes issue ASTERISK-21543)
reported by Matt Jordan
Review: https://reviewboard.asterisk.org/r/2654
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@395151 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch adds more entertainment options to holding bridges and the
bridge_wait application. Also, holding bridges will now use music on
hold as the default entertainment option instead of none. The
parameters for app_bridgewait have changed to (role, options) from
the previous (options) and the options themselves have changed as
well (entertainment options are now contained in an enumerator, role
specification is handled by the role parameter, etc)
(closes issue ASTERISK-21923)
Reported by: Matthew Jordan
Review: https://reviewboard.asterisk.org/r/2679/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@394731 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This process also involved a large amount of rework regarding how to redial
the Parker when a channel leaves a parking lot due to timeout. An attended
transfer channel variable has been added to attended transfers to extensions
that will eventually park (but haven't at the time of transfer) as well.
This resolves one of the two BUGBUG comments remaining in res_parking.
(issues ASTERISK-21877)
Reported by: Matt Jordan
Review: https://reviewboard.asterisk.org/r/2638/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@393704 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The OneTouchRecord feature has historically been a toggle. This patch
adds the ability to make the OneTouchRecord hook optionally start/stop
recording only. If OneTouchRecord is already doing what is requested then
only the invoker hears the courtesy tone and/or start/stop recording
message.
The new feature is written so we could easily add explicit start/stop
recording DTMF hooks for Monitor and MixMonitor.
The majority of the changes in bridge_builtin_features.c is a refactoring
of the OneTouchRecord code (Monitor and MixMonitor versions) so it is easy
to direct the toggle/start/stop functionality.
Review: https://reviewboard.asterisk.org/r/2655/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@393612 65c4cc65-6c06-0410-ace0-fbb531ad65f3
In addition to porting those features, they now enjoy greater feature parity
with one another. Specifically, AutoMixMon now has a start and stop
message that can be specified with TOUCH_MIXMONITOR_MESSAGE_START and
TOUCH_MIXMONITOR_MESSAGE_STOP.
(closes issue ASTERISK-21553)
Reported by: Matt Jordan
Review: https://reviewboard.asterisk.org/r/2620/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@393309 65c4cc65-6c06-0410-ace0-fbb531ad65f3
* Extract a useful routine from the softmix bridge technology for other
technologies. Make other technologies use it if they can.
* Made native and 1-1 bridges write to all parties if the bridge channel
writing the frame into the bridge is NULL. Softmix will also do the same
for frame types that make sense.
* Tweak the bridge write routine return value meaning and adjust the
bridge technologies to match.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@392514 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The bridge frame queue functions need to return an error status if the
frame failed to be queued because of an error condition. The main calls
that needed to return the status are:
ast_bridge_channel_queue_action_data() and
ast_bridge_channel_write_action_data(). The other return changes are
ripple effects.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@392435 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch fixes two memory leaks:
* A memory leak in packing channels into a multi-channel blob payload when
publishing dial messages. The multi-channel blob payload does not steal
the references - this approach was chosen because it works well with the
RAII_VAR macro. Unfortunately, this does mean that you actually have to use
the RAII_VAR macro (or manually deref it yourself)
* RTP instances returned as a result of one of the glue operations are ref
counted and have to be de-ref'd appropriately. We now do that, as saying
that we should do it and then not would be silly.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@391479 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When checking compatability for the native RTP bridge technology there is a
race condition between clearing framehooks that are destroyed when leaving
certain bridges with certain technologies (such as bridge_native_rtp) and
joining bridges with the bridge_native_rtp technology. Yes, that means a
channel in a native RTP bridge could move to another native RTP bridge and
be considered incompatible with the new native RTP bridge causing it to
revert to a simple bridge technology0. This fixes that bug by ignoring
framehooks that have been marked for destruction when checking for
compatibility with the bridge_native_rtp technology.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@391453 65c4cc65-6c06-0410-ace0-fbb531ad65f3
native_rtp_bridge_get can return any result from the ast_rtp_glue_result
enumerator and the join/leave functions for bridge_native_rtp seem to assume
that if the result wasn't local that it was remote. Meanwhile forbid can be
returned by that function which can mean certain glue pointers are NULL. Then
when the join/leave functions try to use members of that pointer, boom.
Segfault.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@391430 65c4cc65-6c06-0410-ace0-fbb531ad65f3
A three party bridge uses the softmix bridging technology. This
technology has a dedicated thread used to perform the analog mixing. When
one of these parties leaves the bridge, the bridge technology is changed
from the softmix technology to a two-party mixing technology. Changing
technologies is done by removing channels from the old technology and
adding them to the new technology. Since the remaining channels do not
leave the bridge, the softmix mixing thread could continue to process all
channels in the bridge. If the bridge code is not able to start
destruction of the softmix technology before the softmix mixing thread
wakes up, a crash happens.
* Added a stop technology callback that technologies can use to request
any helper threads to stop in preparation for being destroyed.
(closes issue AST-1156)
Reported by: John Bigelow
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@390975 65c4cc65-6c06-0410-ace0-fbb531ad65f3
* The channel variable ATTENDED_TRANSFER_COMPLETE_SOUND is no longer
channel driver specific. If the channel variable is set on the
transferrer channel, the sound will be played to the target of an attended
transfer.
* The channel variable BRIDGEPEER becomes a comma separated list of peers
in a multi-party bridge. The BRIDGEPEER value can have a maximum of 10
peers listed. Any more peers in the bridge will not be included in the
list. BRIDGEPEER is not valid in holding bridges like parking since those
channels do not talk to each other even though they are in a bridge.
* The channel variable BRIDGEPVTCALLID is only valid for two party bridges
and will contain a value if the BRIDGEPEER's channel driver supports it.
* The channel variable DYNAMIC_PEERNAME is redundant with BRIDGEPEER and
is removed. The more useful DYNAMIC_WHO_ACTIVATED gives the channel name
that activated the dynamic feature.
* The channel variables DYNAMIC_FEATURENAME and DYNAMIC_WHO_ACTIVATED are
set only on the channel executing the dynamic feature. Executing a
dynamic feature on the bridge peer in a multi-party bridge will execute it
on all peers of the activating channel.
(closes issue ASTERISK-21555)
Reported by: Matt Jordan
Review: https://reviewboard.asterisk.org/r/2582/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@390771 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Features configuration is handled in its own API in
features_config.h and features_config.c. This way, features
configuration is accessible to anything that needs it.
In addition, features configuration has been altered to
be more channel-oriented. Most callers of features API
code will be supplying a channel so that the individual
channel's settings will be acquired rather than the global
setting.
Missing from this commit is XML documentation for the
features configuration. That will be handled in a separate
commit.
Review: https://reviewboard.asterisk.org/r/2578/
(issue ASTERISK-21542)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@390751 65c4cc65-6c06-0410-ace0-fbb531ad65f3
* DTMF attended and blind transfers have hold/unhold behavior restored.
* External attended and blind transfers unhold the transfered party when
the transfer is initiated.
* Made prohibit blind transferring a bridge marked as masquerade only.
(ConfBridge bridges)
* Made running an application or playing a file inside a bridge post the
hold/unhold messages if MOH is requested.
Review: https://reviewboard.asterisk.org/r/2574/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@390289 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The attended transfer API call can complete the attended transfer in a number of ways
depending on the current bridged states of the channels involved.
The hiding of masquerades is done in some bridging-related functions, such as the manager
Bridge action and the Bridge dialplan application. In addition, call pickup was edited
to "move" a channel rather than masquerade it.
Review: https://reviewboard.asterisk.org/r/2511
(closes issue ASTERISK-21334)
Reported by Matt Jordan
(closes issue Asterisk-21336)
Reported by Matt Jordan
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@389848 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Breaks many things until they can be reworked. A partial list:
chan_agent
chan_dahdi, chan_misdn, chan_iax2 native bridging
app_queue
COLP updates
DTMF attended transfers
Protocol attended transfers
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@389378 65c4cc65-6c06-0410-ace0-fbb531ad65f3
* Fixed the potential of losing the multiplexed bridge thread when the
last channel leaves and another joins while the multiplexed thread is
being shut down.
* Refactored and improved the management of the serviced channels array.
* Changed the channels count to a bridges count so it only needs to be
incremented rather than changed by two.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@380666 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Mark Michelson
Matthew Jordan
Jonathan Rose
Richard Mudgett
Joshua Colp