........
r160764 | qwell | 2008-12-03 15:38:07 -0600 (Wed, 03 Dec 2008) | 7 lines
Only show this warning when we want to show it.
(closes issue #13982)
Reported by: coolmig
Patches:
chan_agent.c.patch uploaded by coolmig (license 621)
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@160765 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r160703 | murf | 2008-12-03 13:41:42 -0700 (Wed, 03 Dec 2008) | 11 lines
(closes issue #13597)
Reported by: john8675309
Patches:
patch.13597 uploaded by murf (license 17)
Tested by: murf, john8675309
This patch causes the setcid func to update the CDR
clid after setting the channel field.
I also notice that in trunk, the num/number of 1.4 is
left out; I decided to include the option to use
either in trunk, so as not to have 1.4 upgraders
not to have problems.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@160760 65c4cc65-6c06-0410-ace0-fbb531ad65f3
- Move the code to start using the LIST macros.
Review: http://reviewboard.digium.com/r/72
(closes issue #13232)
Reported by: eliel
Patches:
iax2-provision.patch.txt uploaded by eliel (license 64)
(with minor changes pointed by Mark Michelson on review board)
Tested by: eliel
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@160663 65c4cc65-6c06-0410-ace0-fbb531ad65f3
for app_dial and app_queue to run a gosub when the call is answered.
* Check for the existence of the gosub target in gosub_exec. If it is nonexistent,
then this will cause errors when we attempt to actually run the gosub, including
a definite memory leak and potential crashes. Return an error in this situation
* Check the return value of pbx_exec in app_dial and app_queue before attempting
to actually run the gosub routine. If there was an error, we should not attempt
to run the gosub.
* Change a '|' to a ',' in app_queue.
* Add some extra curly braces where they had been missing previously.
(closes issue #13548)
Reported by: fiddur
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@160626 65c4cc65-6c06-0410-ace0-fbb531ad65f3
........
r160570 | tilghman | 2008-12-03 11:55:12 -0600 (Wed, 03 Dec 2008) | 5 lines
During bridge code, the channel bridge may return a retry code, if a transfer
was initiated but not yet completed. If the bridge is immediately retried,
then we may send a storm of TXREQ packets, even though the first set is sent
reliably (retransmitted). Fixes AST-137.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@160585 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r160558 | tilghman | 2008-12-03 11:34:34 -0600 (Wed, 03 Dec 2008) | 7 lines
If an entry is added to the directory during a scan when another entry expires,
then that new entry will not be processed promptly, but must wait for either a
future entry to start or a current entry's retry to occur. If no other entries
exist in the directory (other than the new entries) when a bunch expire, then
the new entries must wait until another new entry is added to be processed.
This was a rather weird race condition, really. Fixes AST-147.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@160559 65c4cc65-6c06-0410-ace0-fbb531ad65f3
handling in app_queue was just completely wrong, mostly
because the channel operations being performed were being
done on the incorrect channel.
With this set of changes, a gosub will correctly run on
the answering queue member's channel. There are still crash
issues which occur if there are dialplan syntax errors, so
I cannot yet close the referenced issue.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@160555 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r160551 | tilghman | 2008-12-03 10:58:34 -0600 (Wed, 03 Dec 2008) | 4 lines
Don't start scanning the directory until all modules are loaded, because some
required modules (channels, apps, functions) may not yet be in memory yet.
Fixes AST-149.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@160552 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r160480 | tilghman | 2008-12-03 08:09:35 -0600 (Wed, 03 Dec 2008) | 7 lines
Jon Bonilla (Manwe) pointed out on the -dev list:
"I guess that having only ip-phones in mind is not a good approach. Since it is
possible to have a sip proxy connected to asterisk we could receive a 407
(unauthorized) or 483 (too many hops) as response and dialog ending would not be
a good behavior."
So modified.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@160481 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r160297 | tilghman | 2008-12-02 11:42:09 -0600 (Tue, 02 Dec 2008) | 10 lines
When the text does not match exactly (e.g. RTP/SAVP), then the %n conversion
fails, and the resulting integer is garbage. Thus, we must initialize the
integer and check it afterwards for success.
(closes issue #14000)
Reported by: folke
Patches:
asterisk-sipbg-sscanf-1.4.22.diff uploaded by folke (license 626)
asterisk-sipbg-sscanf-1.6.0.1.diff uploaded by folke (license 626)
asterisk-sipbg-sscanf-trunk-r159896.diff uploaded by folke (license 626)
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@160308 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Based on cli_permissions.conf configuration file, we are able to permit or deny
cli commands based on some patterns and the local user and group running rasterisk.
(Sorry if I missed some of the testers).
Reviewboard: http://reviewboard.digium.com/r/11/
(closes issue #11123)
Reported by: eliel
Tested by: eliel, IgorG, Laureano, otherwiseguy, mvanbaak
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@160062 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r160003 | russell | 2008-12-01 11:27:30 -0600 (Mon, 01 Dec 2008) | 6 lines
Apply some logic used in iax2_indicate() to iax2_setoption(), as well, since they
both have the potential to send control frames in the middle of call setup. We
have to wait until we have received a message back from the remote end before
we try to send any more frames. Otherwise, the remote end will consider it
invalid, and we'll get stuck in an INVAL/VNAK storm.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@160004 65c4cc65-6c06-0410-ace0-fbb531ad65f3
------------------------------------------------------------------------
r159808 | kpfleming | 2008-11-29 10:58:29 -0600 (Sat, 29 Nov 2008) | 7 lines
update dev-mode compiler flags to match the ones used by default on Ubuntu Intrepid, so all developers will see the same warnings and errors
since this branch already had some printf format attributes, enable checking for them and tag functions that didn't have them
format attributes in a consistent way
------------------------------------------------------------------------
in addition:
move some format attributes from main/utils.c to the header files they belong in, and fix up references to the relevant functions based on new compiler warnings
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@159818 65c4cc65-6c06-0410-ace0-fbb531ad65f3
because SPRINTF() use non-literal format strings (which cannot be checked), move it into its own module so the rest of func_strings can benefit from format string checking
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@159774 65c4cc65-6c06-0410-ace0-fbb531ad65f3
They removed the LDAP_DEPRECATED define from their source and since we are using a couple
of deprecated function calls we should define it with a CFLAG.
Tested by me on OpenBSD 4.4 and snuff-home on Linux to make sure everything keeps compiling.
It shouldn't break, we only define the LDAP_DEPRECATED with this which is what
all 2.2.X and older versions of OpenLDAP did in their own tree.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@159734 65c4cc65-6c06-0410-ace0-fbb531ad65f3
........
r159571 | kpfleming | 2008-11-26 14:21:04 -0600 (Wed, 26 Nov 2008) | 2 lines
rename these files so as to avoid conflicts when users update their working copies and have unversioned files already in place
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@159573 65c4cc65-6c06-0410-ace0-fbb531ad65f3
a call fails
1) Hang up the original destination if the local channel cannot
be requested.
2) Hang up the local channel (in addition to the original destination)
if ast_call fails when calling the newly created local channel.
This prevents channels from sticking around forever in the
case of a botched call forward (e.g. to an extension which does not
exist).
(closes issue #13764)
Reported by: davidw
Patches:
13764_v2.patch uploaded by putnopvut (license 60)
Tested by: putnopvut, davidw
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@159554 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r159316 | murf | 2008-11-25 15:41:10 -0700 (Tue, 25 Nov 2008) | 15 lines
(closes issue #12694)
Reported by: yraber
Patches:
12694.2nd.diff uploaded by murf (license 17)
Tested by: murf, laurav
Thanks to file (Joshua Colp) for his IAX fix.
the change to cdr.c allows no-answer to percolate
up into CDR's, and feels like the right place to
locate this fix; if BUSY is done here, no-answer
should be, too.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@159360 65c4cc65-6c06-0410-ace0-fbb531ad65f3
for the "pls_hold_prompt" option. This does not affect any released
version of Asterisk, so there is no need to update the CHANGES
file for this.
(closes issue #13893)
Reported by: eliel
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@159250 65c4cc65-6c06-0410-ace0-fbb531ad65f3
(or ~500 chars max on LOW_MEMORY) to 80 chars max). This will allow more
channels to be used in a single hint.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@159162 65c4cc65-6c06-0410-ace0-fbb531ad65f3