https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r307750 | tilghman | 2011-02-14 00:50:23 -0600 (Mon, 14 Feb 2011) | 23 lines
Calling a gosub routine defined in AEL from Dial/Queue ceased to work.
A bug in AEL did not distinguish between the "s" extension generated by
AEL and an "s" extension that was required to exist by the chan_dahdi
(or another channel) that was not supplied with a starting extension.
Therefore, AEL made incorrect assumptions about what commands were
permissable in the context. This was fixed by making AEL generate a
different extension name. However, Dial and Queue make additional
assumptions about the name of the default gosub extension. Therefore,
they needed to be brought into line with a "macro" rendered by AEL (as
a gosub), without breaking traditional dialplans written without the
aid of AEL.
Related to (issue #18480)
Reported by: nivek
(closes issue #18729)
Reported by: kkm
Patches:
20110209__issue18729.diff.txt uploaded by tilghman (license 14)
018729-dial-queue-gosub-try3.patch uploaded by kkm (license 888)
Tested by: kkm
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@307751 65c4cc65-6c06-0410-ace0-fbb531ad65f3
From the submitter:
I've added a new manager action to list only the active conferences on an
Asterisk system. It shows the same data displayed when you run a 'meetme list'
on the Asterisk CLI.
(closes issue #17905)
Reported by: rcasas
Patches:
app_meetme.c.patch uploaded by rcasas (license 641)
Review: https://reviewboard.asterisk.org/r/874/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@307359 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
................
r306962 | jpeeler | 2011-02-08 13:25:38 -0600 (Tue, 08 Feb 2011) | 22 lines
Merged revisions 306961 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
................
r306961 | jpeeler | 2011-02-08 13:25:10 -0600 (Tue, 08 Feb 2011) | 15 lines
Merged revisions 306960 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r306960 | jpeeler | 2011-02-08 13:18:50 -0600 (Tue, 08 Feb 2011) | 9 lines
Backup file storing message duration is not used with IMAP_STORAGE, remove code.
The message duration is stored in the body of the email when using IMAP_STORAGE,
so nothing needs to happen with the backup file.
(closes issue #18718)
Reported by: kerframil
........
................
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@306963 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The display ie handling can be controlled independently in the send and
receive directions with the following options:
* Block display text data.
* Use display text in SETUP/CONNECT messages for name.
* Use display text for COLP name updates (FACILITY/NOTIFY as appropriate).
* Pass arbitrary display text during a call. Sent in INFORMATION
messages. Received from any message that the display text was not used as
a name.
If the display options are not set then the options default to legacy
behavior.
The arbitrary display text is exchanged between bridged channels using the
AST_FRAME_TEXT frame type.
To send display text from the dialplan use the SendText() application when
the arbitrary display text option is enabled.
JIRA SWP-2688
JIRA ABE-2693
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@306396 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r306324 | rmudgett | 2011-02-04 12:53:06 -0600 (Fri, 04 Feb 2011) | 9 lines
Don't send redirecting updates to the caller if the dialplan forked the call.
Each fork in the dial could be redirected and confuse the caller. For
ISDN the DivLeg1 and DivLeg3 messages would get confused because ISDN
redirects calls in sequence not in parallel.
* Also fixed a formatting inconsistency in app_dial.c and make a warning
message more useful about what frame type could not be written.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@306325 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch is the foundation of an entire new way of looking at media in Asterisk.
The code present in this patch is everything required to complete phase1 of my
Media Architecture proposal. For more information about this project visit the link below.
https://wiki.asterisk.org/wiki/display/AST/Media+Architecture+Proposal
The primary function of this patch is to convert all the usages of format
bitfields in Asterisk to use the new format and format_cap APIs. Functionally
no change in behavior should be present in this patch. Thanks to twilson
and russell for all the time they spent reviewing these changes.
Review: https://reviewboard.asterisk.org/r/1083/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@306010 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
................
r305923 | rmudgett | 2011-02-02 18:24:40 -0600 (Wed, 02 Feb 2011) | 24 lines
Merged revisions 305889 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
................
r305889 | rmudgett | 2011-02-02 18:15:07 -0600 (Wed, 02 Feb 2011) | 17 lines
Merged revisions 305888 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r305888 | rmudgett | 2011-02-02 18:02:43 -0600 (Wed, 02 Feb 2011) | 8 lines
Minor AST_FRAME_TEXT related issues.
* Include the null terminator in the buffer length. When the frame is
queued it is copied. If the null terminator is not part of the frame
buffer length, the receiver could see garbage appended onto it.
* Add channel lock protection with ast_sendtext().
* Fixed AMI SendText action ast_sendtext() return value check.
........
................
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@305939 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
................
r305254 | qwell | 2011-01-31 17:07:00 -0600 (Mon, 31 Jan 2011) | 24 lines
Merged revisions 305253 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
................
r305253 | qwell | 2011-01-31 16:59:34 -0600 (Mon, 31 Jan 2011) | 17 lines
Merged revisions 305252 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r305252 | qwell | 2011-01-31 16:56:54 -0600 (Mon, 31 Jan 2011) | 10 lines
Prevent a crash when dialing a technology with no destination (ex: Dial(SIP/))
chan_iax2 and other channel drivers already had code to prevent this. The
attempt that app_dial was making to prevent it was not correct, so I fixed that.
(closes issue #18371)
Reported by: gbour
Patches:
18371.patch uploaded by gbour (license 1162)
........
................
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@305255 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Add and extend the see-also sections to the documentation for applications
and functions in an effort to expand the online documentation of the wiki.
Also check for and update any links to moved documentation in the doc folder.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@304913 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
................
r304774 | seanbright | 2011-01-29 12:54:43 -0500 (Sat, 29 Jan 2011) | 16 lines
Merged revisions 304773 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
........
r304773 | seanbright | 2011-01-29 12:51:28 -0500 (Sat, 29 Jan 2011) | 9 lines
When we pass the S() or L() options to MeetMe, make sure that we honor C as well.
Without this patch, if the user was kicked from the conference via the S() or L()
mechanism, we would just hang up on them even if we also passed C (continue in
dialplan when kicked). With this patch we honor the C flag in those cases.
(closes issue #17317)
Reported by: var
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@304775 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
................
r304730 | seanbright | 2011-01-29 12:15:27 -0500 (Sat, 29 Jan 2011) | 22 lines
Merged revisions 304729 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
........
r304729 | seanbright | 2011-01-29 12:01:51 -0500 (Sat, 29 Jan 2011) | 15 lines
Make sure that we unref the correct object when ejecting the most recent caller.
Currently, when we kick the last user to enter, we decrement our own reference
count which results in a crash when we kick another user or when we exit the
conference ourselves.
This will fix#18225 in 1.8 and trunk, but that particular bug does not exist in
1.6.2.
(closes issue #18225)
Reported by: kenji
Patches:
issue18225.patch uploaded by seanbright (license 71)
Tested by: seanbright
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@304772 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
................
r304727 | seanbright | 2011-01-29 11:28:27 -0500 (Sat, 29 Jan 2011) | 16 lines
Merged revisions 304726 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
........
r304726 | seanbright | 2011-01-29 11:26:57 -0500 (Sat, 29 Jan 2011) | 9 lines
Fix user reference leak in MeetMe.
We were unlinking the user from the conferences user container, but not
decrementing the reference count of the user as well, resulting in a leak.
(closes issue #18444)
Reported by: junky
Tested by: seanbright
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@304728 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
................
r304683 | seanbright | 2011-01-28 17:54:23 -0500 (Fri, 28 Jan 2011) | 16 lines
Merged revisions 304659,304682 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
........
r304659 | seanbright | 2011-01-28 16:22:09 -0500 (Fri, 28 Jan 2011) | 5 lines
Don't leak references if we can't create a pseudo channel for mixing in MeetMe.
If there was a problem allocating a pseudo channel when building our meetme, we
weren't destroying our user container or destroying the mutexes that we created.
........
r304682 | seanbright | 2011-01-28 17:38:05 -0500 (Fri, 28 Jan 2011) | 2 lines
Revert part of the previous commit that snuck in.
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@304684 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Followme answers an incoming call if it hasn't already been answered and starts
MOH. Some poorly designed autodialers see the answer and start playing their
message to the hold music. The 'N' option has been added to indicate ringing and
not answer until the call is accepted.
(closes issue #18479)
Reported by: ianc
Patches:
trunk_followme.diff uploaded by ianc (license 998)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@304384 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
................
r303678 | jpeeler | 2011-01-25 11:02:38 -0600 (Tue, 25 Jan 2011) | 33 lines
Merged revisions 303677 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
................
r303677 | jpeeler | 2011-01-25 10:59:28 -0600 (Tue, 25 Jan 2011) | 26 lines
Merged revisions 303676 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r303676 | jpeeler | 2011-01-25 10:58:29 -0600 (Tue, 25 Jan 2011) | 20 lines
Fix voicemail sequencing for file based storage.
A previous change was made to account for when the number of voicemail messages
exceeds the max limit to be handled properly, but it caused gaps in the messages
to not be properly handled. This has now been resolved.
In later non 1.4 branches, it appears that resequencing wasn't even occurring
due from what appears and accidental code removal.
(closes issue #18498)
Reported by: JJCinAZ
Patches:
bug18498v2.patch uploaded by jpeeler (license 325)
(closes issue #18486)
Reported by: bluefox
Patches:
bug18486.patch uploaded by jpeeler (license 325)
........
................
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@303679 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
................
r303549 | russell | 2011-01-24 14:51:37 -0600 (Mon, 24 Jan 2011) | 45 lines
Merged revisions 303548 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
................
r303548 | russell | 2011-01-24 14:49:53 -0600 (Mon, 24 Jan 2011) | 38 lines
Merged revisions 303546 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r303546 | russell | 2011-01-24 14:32:21 -0600 (Mon, 24 Jan 2011) | 31 lines
Fix channel redirect out of MeetMe() and other issues with channel softhangup.
Mantis issue #18585 reports that a channel redirect out of MeetMe() stopped
working properly. This issue includes a patch that resolves the issue by
removing a call to ast_check_hangup() from app_meetme.c. I left that in my
patch, as it doesn't need to be there. However, the rest of the patch fixes
this problem with or without the change to app_meetme.
The key difference between what happens before and after this patch is the
effect of the END_OF_Q control frame. After END_OF_Q is hit in ast_read(),
ast_read() will return NULL. With the ast_check_hangup() removed, app_meetme
sees this which causes it to exit as intended. Checking ast_check_hangup()
caused app_meetme to exit earlier in the process, and the target of the
redirect saw the condition where ast_read() returned NULL.
Removing ast_check_hangup() works around the issue in app_meetme, but doesn't
solve the issue if another application did the same thing. There are also
other edge cases where if an application finishes at the same time that a
redirect happens, the target of the redirect will think that the channel hung
up. So, I made some changes in pbx.c to resolve it at a deeper level. There
are already places that unset the SOFTHANGUP_ASYNCGOTO flag in an attempt to
abort the hangup process. My patch extends this to remove the END_OF_Q frame
from the channel's read queue, making the "abort hangup" more complete. This
same technique was used in every place where a softhangup flag was cleared.
(closes issue #18585)
Reported by: oej
Tested by: oej, wedhorn, russell
Review: https://reviewboard.asterisk.org/r/1082/
........
................
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@303551 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
................
r303009 | jpeeler | 2011-01-20 11:10:32 -0600 (Thu, 20 Jan 2011) | 21 lines
Merged revisions 303008 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
................
r303008 | jpeeler | 2011-01-20 11:07:44 -0600 (Thu, 20 Jan 2011) | 14 lines
Merged revisions 303007 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r303007 | jpeeler | 2011-01-20 11:04:08 -0600 (Thu, 20 Jan 2011) | 8 lines
Add new queue strategy to preserve behavior for when queue members moved to ao2.
Add queue strategy called "rrordered" to mimic old behavior from when queue
members were stored in a linked list.
ABE-2707
........
................
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@303011 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
................
r302918 | lmadsen | 2011-01-20 09:45:39 -0600 (Thu, 20 Jan 2011) | 16 lines
Merged revisions 302917 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
........
r302917 | lmadsen | 2011-01-20 09:42:05 -0600 (Thu, 20 Jan 2011) | 8 lines
Option L() is milliseconds, not seconds.
> Change the verbose output of option L() to say milliseconds and not seconds
> as the value is in milliseconds.
>
> (closes issue #18264)
> Reported by: jacco
> Patches:
> app_dial_patch.txt uploaded by lmadsen (license 10)
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@302919 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
................
r301047 | jpeeler | 2011-01-07 13:58:30 -0600 (Fri, 07 Jan 2011) | 15 lines
Merged revisions 301046 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
........
r301046 | jpeeler | 2011-01-07 13:57:42 -0600 (Fri, 07 Jan 2011) | 8 lines
Fix regression causing forwarding voicemails to not work with file storage.
I had actually already fixed this in 295200 in 1.4 and thought it wasn't
missing in the other branches for some reason.
(closes issue #18358)
Reported by: cabal95
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@301048 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
................
r300955 | jpeeler | 2011-01-07 11:24:14 -0600 (Fri, 07 Jan 2011) | 21 lines
Merged revisions 300951 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
................
r300951 | jpeeler | 2011-01-07 11:23:37 -0600 (Fri, 07 Jan 2011) | 14 lines
Merged revisions 300918 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r300918 | jpeeler | 2011-01-07 11:13:21 -0600 (Fri, 07 Jan 2011) | 7 lines
Ensure good bye prompt in voicemail is played at the correct time.
Specifically in the case of timing out but not leaving voicemail nothing
should be heard. And when leaving voicemail it should be heard.
ABE-2647
........
................
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@300959 65c4cc65-6c06-0410-ace0-fbb531ad65f3
playing_silence was not initialized with the struct
was initialized, it was being set after the fact
which caused problems if something that relied on
playing_silence being set was called too quickly
(closes issue #18430)
Reported by: stevebrandli
Patches:
externalivr.patch uploaded by thedavidfactor (license 903)
Tested by: thedavidfactor, stevebrandli
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@300121 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
................
r298598 | jpeeler | 2010-12-16 14:51:44 -0600 (Thu, 16 Dec 2010) | 21 lines
Merged revisions 298597 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
................
r298597 | jpeeler | 2010-12-16 14:49:33 -0600 (Thu, 16 Dec 2010) | 14 lines
Merged revisions 298596 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r298596 | jpeeler | 2010-12-16 14:46:52 -0600 (Thu, 16 Dec 2010) | 7 lines
Fix improper hangup when doing an attended transfer to queue.
Had to indicate ringing in wait_for_answer so the attended transfer code would
not try and hang up the local channel it created, which would kill the call.
ABE-2624
........
................
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@298599 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
................
r297245 | russell | 2010-12-02 07:20:19 -0600 (Thu, 02 Dec 2010) | 20 lines
Merged revisions 297229 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
................
r297229 | russell | 2010-12-02 07:16:47 -0600 (Thu, 02 Dec 2010) | 13 lines
Merged revisions 297228 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r297228 | russell | 2010-12-02 07:16:15 -0600 (Thu, 02 Dec 2010) | 6 lines
Add "DAHDI" to a couple of app_meetme error messages.
This is in response to some questions on IRC. To the user, there was nothing
that made it obvious that this error had anything to do with DAHDI not being
loaded.
........
................
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@297248 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Added option v(mailbox@[context]) which tells MeetMe where to look for a users greet file. If one does not exist it clears the v option and defers to the functionality of i/I as/if set by the MeetMe() command.
Review: https://reviewboard.asterisk.org/r/1009/
(closes issue #18297)
Reported by: parisioa
Patches:
meetme_final_patch_v.diff uploaded by parisioa (license 1153)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@296249 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
................
r296002 | russell | 2010-11-24 11:13:08 -0600 (Wed, 24 Nov 2010) | 52 lines
Merged revisions 296001 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
................
r296001 | russell | 2010-11-24 11:03:16 -0600 (Wed, 24 Nov 2010) | 45 lines
Merged revisions 296000 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r296000 | russell | 2010-11-24 10:48:39 -0600 (Wed, 24 Nov 2010) | 38 lines
Handle failures building translation paths more effectively.
The problem scenario occurred on a heavily loaded system that was using the
codec_dahdi module and exceeded the hardware transcoding capacity. The failure
mode at that point was not good. The report came in to us as an Asterisk
lock-up. The "core show locks" shows a ton of threads locked up (but no
obvious deadlock). Upon deeper investigation, when the system is in this
state, the CPU was maxed out. The CPU was being consumed by the Asterisk
logger spewing messages on every audio frame for calls set up after transcoder
capacity was reached.
The purpose of this patch is to make Asterisk handle failures to create a
translation path in a more graceful manner. If we can't translate, then the
call just needs to be dropped, as it's not going to work. These are the
changes:
1) In set_format() of channel.c (which is called by set_read_format() and
set_write_format()), it was ignoring if ast_translator_build_path() failed and
returned NULL. It now pays attention to that case and returns a result
reflecting failure. With this change in place, the bridging code will
immediately detect a failure and end the bridge instead of proceeding to try to
bridge frames that can't be translated and making channel drivers freak out by
sending them frames in a format they weren't expecting.
2) In ast_indicate_data() of channel.c, failure of ast_playtones_start() was
ignored. It is now reflected in the return value of the function. This didn't
turn out to have any affect on the bug, but seemed like a good change to leave
in.
3) In app_dial(), when only sending a call to a single endpoint, it will
attempt to do some bridging of its own of early audio. It uses
make_compatible() when it's going to do this. However, it ignored failure from
make compatible. So, even with the fix from #1, if there was early audio going
through app_dial, there would still be a period of invalid frames passing
through. After detecting failure here, Dial() exits.
ABE-2658
........
................
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@296034 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
................
r295866 | rmudgett | 2010-11-22 13:36:10 -0600 (Mon, 22 Nov 2010) | 60 lines
Merged revisions 295843 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
................
r295843 | rmudgett | 2010-11-22 13:28:23 -0600 (Mon, 22 Nov 2010) | 53 lines
Merged revisions 295790 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r295790 | rmudgett | 2010-11-22 12:46:26 -0600 (Mon, 22 Nov 2010) | 46 lines
The channel redirect function (CLI or AMI) hangs up the call instead of redirecting the call.
To recreate the problem:
1) Party A calls Party B
2) Invoke CLI "channel redirect" command to redirect channel call leg
associated with A.
3) All associated channels are hung up.
Note that if the CLI command were done on the channel call leg associated
with B it works.
This regression was a result of the fix for issue #16946
(https://reviewboard.asterisk.org/r/740/).
The regression affects all features that use an async goto to execute the
dialplan because of an external event: Channel redirect, AMI redirect, SIP
REFER, and FAX detection.
The struct ast_channel._softhangup code is a mess. The variable is used
for several purposes that do not necessarily result in the call being hung
up. I have added doxygen comments to describe how the various _softhangup
bits are used. I have corrected all the places where the variable was
tested in a non-bit oriented manner.
The primary fix is the new AST_CONTROL_END_OF_Q frame. It acts as a weak
hangup request so the soft hangup requests that do not normally result in
a hangup do not hangup.
JIRA SWP-2470
JIRA SWP-2489
(closes issue #18171)
Reported by: SantaFox
(closes issue #18185)
Reported by: kwemheuer
(closes issue #18211)
Reported by: zahir_koradia
(closes issue #18230)
Reported by: vmarrone
(closes issue #18299)
Reported by: mbrevda
(closes issue #18322)
Reported by: nerbos
Review: https://reviewboard.asterisk.org/r/1013/
........
................
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@295867 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
................
r294905 | jpeeler | 2010-11-12 14:52:06 -0600 (Fri, 12 Nov 2010) | 30 lines
Merged revisions 294904 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
................
r294904 | jpeeler | 2010-11-12 14:51:15 -0600 (Fri, 12 Nov 2010) | 23 lines
Merged revisions 294903 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r294903 | jpeeler | 2010-11-12 14:49:09 -0600 (Fri, 12 Nov 2010) | 16 lines
Fix regression causing abort in voicemail after opening a mailbox with no mesgs.
In order to be more safe, some error handling code was changed to respect more
error conditions including the potential memory allocation failure for deleted
and heard message tracking introduced in 293004. However, last_message_index
returns -1 for zero messages (perhaps as expected) and was triggering the
stricter error checking. Because last_message_index is only called directly
in one place, just return 0 from open_mailbox (for file based storage) when no
messages are detected unless a real error has occurred.
(closes issue #18240)
Reported by: leobrown
Patches:
bug18240.1-6-2.diff.txt uploaded by alecdavis (license 585)
Tested by: pabelanger
........
................
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@294907 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
................
r293119 | jpeeler | 2010-10-26 13:49:08 -0500 (Tue, 26 Oct 2010) | 43 lines
Merged revisions 293118 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
................
r293118 | jpeeler | 2010-10-26 13:33:24 -0500 (Tue, 26 Oct 2010) | 36 lines
Merged revisions 293004 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r293004 | jpeeler | 2010-10-25 17:55:28 -0500 (Mon, 25 Oct 2010) | 29 lines
Fix inprocess_container in voicemail to correctly restrict max messages.
The comparison function logic was off, so the number of sessions for a given
mailbox were not being incremented properly. This problem caused the maximum
number of messages per folder to not be respected when simultaneously leaving
multiple voicemails just below the threshold.
These problems should be fixed by the above, but just in case:
Fixed resequence_mailbox to rely on the actual number of detected number of
files in a directory rather than just assuming only 10 messages more than the
maximum had been left. Also if more messages than the maximum are deleted they
are actually removed now.
The second purpose of this commit should have been separated out probably, but
is related to the above. Again, if the number of messages in a given voicemail
folder exceeds the maximum set limit make sure to allocate enough space for the
deleted and heard index tracking array.
A few random fixes:
There was a forgotten decrement of the inprocess count in imap_store_file.
When using IMAP storage, do not look in the directory where file based storage
messages may still reside and influence the message count.
Ensure to use only the first format in sendmail.
ABE-2516
........
................
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@293120 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
................
r292227 | jpeeler | 2010-10-18 16:55:46 -0500 (Mon, 18 Oct 2010) | 25 lines
Merged revisions 292226 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
................
r292226 | jpeeler | 2010-10-18 16:54:38 -0500 (Mon, 18 Oct 2010) | 18 lines
Merged revisions 292223 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r292223 | jpeeler | 2010-10-18 16:50:30 -0500 (Mon, 18 Oct 2010) | 11 lines
Fix improper operator key acceptance and clean up temp recording files.
This is a fix for when pressing the operator key after recording an unavailable,
busy, name, or temporary message in mailbox options. The operator key should not
be accepted here, but should be allowed during the message recording. If the
operator key is pressed during ensure the file is saved or deleted as
apporopriate. Also, ensure removal of temporary recorded files after an early
hang up or when message acceptance confirmation times out.
ABE-2518
........
................
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@292228 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Add the extension and context of the calling channel to the log output if a macro could not be found.
(closes issue #18112)
Reported by: prado
Patches:
app_macro-info.diff uploaded by prado (license 510)
Tested by: schmidts
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@291361 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
................
r289426 | russell | 2010-09-30 10:39:45 -0500 (Thu, 30 Sep 2010) | 22 lines
Merged revisions 289425 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
................
r289425 | russell | 2010-09-30 10:37:29 -0500 (Thu, 30 Sep 2010) | 15 lines
Merged revisions 289424 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r289424 | russell | 2010-09-30 10:34:29 -0500 (Thu, 30 Sep 2010) | 8 lines
Fix a crash in app_sms.
Since the data being passed to the generator callback is on the stack of the
SMS() application, we must ensure that the generator is stopped before the
application exits.
ABE-2587
........
................
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@289427 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r288079 | rmudgett | 2010-09-21 15:29:51 -0500 (Tue, 21 Sep 2010) | 2 lines
Protect channel access in CONNECTED_LINE and REDIRECTING interception macro launch code.
........
r288080 | rmudgett | 2010-09-21 15:29:59 -0500 (Tue, 21 Sep 2010) | 8 lines
Simplify locking code for REDIRECTING interception macro when forwarding a call.
Simplified the locking code by using a local copy of the redirecting party
information in app_dial.c:do_forward() and app_queue.c:wait_for_answer()
for launching the REDIRECTING interception macro when a call is forwarded.
Reduced the lock time of the 'o->chan' and 'in' channels.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@288081 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
................
r287760 | bbryant | 2010-09-20 20:00:23 -0400 (Mon, 20 Sep 2010) | 30 lines
Merged revisions 287759 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
................
r287759 | bbryant | 2010-09-20 19:58:26 -0400 (Mon, 20 Sep 2010) | 23 lines
Merged revisions 287758 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r287758 | bbryant | 2010-09-20 19:57:08 -0400 (Mon, 20 Sep 2010) | 16 lines
Fix misvalidation of meetme pins in conjunction with the 'a' MeetMe flag.
When using the 'a' MeetMe flag and having a user and admin pin setup for your
conference, using the user pin would gain you admin priviledges. Also, when no
user pin was set, an admin pin was, the 'a' MeetMe flag wasn't used, and the
user tried to enter a conference then they were still prompted for a pin and
forced to hit #.
(closes issue #17908)
Reported by: kuj
Patches:
pins_2.patch uploaded by kuj (license 1111)
Tested by: kuj
Review: [full review board URL with trailing slash]
........
................
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@287763 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
................
r287015 | jpeeler | 2010-09-15 15:32:52 -0500 (Wed, 15 Sep 2010) | 21 lines
Merged revisions 286998 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
................
r286998 | jpeeler | 2010-09-15 15:28:02 -0500 (Wed, 15 Sep 2010) | 14 lines
Merged revisions 286941 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r286941 | jpeeler | 2010-09-15 15:08:52 -0500 (Wed, 15 Sep 2010) | 7 lines
Ensure mailbox is not filled to capacity before doing message forwarding.
Specifically, before prompting to record a prepended message the capacity is
checked first. If the mailbox is full the extension will be reprompted.
ABE-2517
........
................
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@287016 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
................
r285533 | bbryant | 2010-09-08 16:58:43 -0400 (Wed, 08 Sep 2010) | 15 lines
Merged revisions 285532 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
........
r285532 | bbryant | 2010-09-08 16:56:12 -0400 (Wed, 08 Sep 2010) | 8 lines
Fixes a bug with MeetMe where after announcing the amount of time left in a conference, if music on hold was playing, it doesn't restart.
(closes issue #17408)
Reported by: sysreq
Patches:
asterisk-issue-17408_fixed.patch uploaded by sysreq (license 1009)
Tested by: sysreq
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@285534 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
................
r284281 | tilghman | 2010-08-30 17:28:47 -0500 (Mon, 30 Aug 2010) | 18 lines
Merged revisions 284280 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
........
r284280 | tilghman | 2010-08-30 17:27:06 -0500 (Mon, 30 Aug 2010) | 11 lines
Fix 3 coding errors:
1) After we close FD, we should not be trying to write to it.
2) Call _exit(0), not exit(0), to avoid running shutdown routines in a child.
3) Use endian, not processor, detection to ensure bytes are written in the correct order.
(closes issue #15706)
Reported by: modelnine
Patches:
asterisk-1.6.1.1-festival-debug.patch uploaded by modelnine (license 865)
Tested by: gmartinez
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@284282 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
................
r279227 | rmudgett | 2010-07-23 17:20:47 -0500 (Fri, 23 Jul 2010) | 21 lines
Merged revisions 279207 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
................
r279207 | rmudgett | 2010-07-23 17:11:23 -0500 (Fri, 23 Jul 2010) | 14 lines
Merged revisions 279206 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r279206 | rmudgett | 2010-07-23 16:56:44 -0500 (Fri, 23 Jul 2010) | 7 lines
SIP promiscuous redirect could fail to dial the redirect.
The ast_channel was created with one variable to ast_request() but the
call to ast_call() that initiates the outgoing call was using a different
variable. The two variables are not equivalent if the call_forward string
included a channel technology specifier. e.g., SIP/200
........
................
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@279245 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Also, parse the useropts properly, when retrieving from realtime, and add them
to the existing flags.
(closes issue #17502)
Reported by: kenji
Patches:
20100720__issue17502.diff.txt uploaded by tilghman (license 14)
Tested by: kenji
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@278463 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Just say the number of seconds (after minutes) rather than doing some incorrect
calculation with respect to minutes.
(closes issue #17498)
Reported by: corruptor
Patches:
holdesecs_bug.diff uploaded by corruptor (license 253)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@277488 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r277182 | pabelanger | 2010-07-16 13:10:36 -0400 (Fri, 16 Jul 2010) | 8 lines
Total analysis time error with SIP and silence suppression
When using app_amd with SIP providers that have silence
suppression on, the iTotalTime count increases exponentially.
(closes issue #17656)
Reported by: juls
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@277183 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The purpose of this patch is to eliminate struct ast_callerid since it has
turned into a miscellaneous collection of various party information.
Eliminate struct ast_callerid and replace it with the following struct
organization:
struct ast_party_name {
char *str;
int char_set;
int presentation;
unsigned char valid;
};
struct ast_party_number {
char *str;
int plan;
int presentation;
unsigned char valid;
};
struct ast_party_subaddress {
char *str;
int type;
unsigned char odd_even_indicator;
unsigned char valid;
};
struct ast_party_id {
struct ast_party_name name;
struct ast_party_number number;
struct ast_party_subaddress subaddress;
char *tag;
};
struct ast_party_dialed {
struct {
char *str;
int plan;
} number;
struct ast_party_subaddress subaddress;
int transit_network_select;
};
struct ast_party_caller {
struct ast_party_id id;
char *ani;
int ani2;
};
The new organization adds some new information as well.
* The party name and number now have their own presentation value that can
be manipulated independently. ISDN supplies the presentation value for
the name and number at different times with the possibility that they
could be different.
* The party name and number now have a valid flag. Before this change the
name or number string could be empty if the presentation were restricted.
Most channel drivers assume that the name or number is then simply not
available instead of indicating that the name or number was restricted.
* The party name now has a character set value. SIP and Q.SIG have the
ability to indicate what character set a name string is using so it could
be presented properly.
* The dialed party now has a numbering plan value that could be useful to
have available.
The various channel drivers will need to be updated to support the new
core features as needed. They have simply been converted to supply
current functionality at this time.
The following items of note were either corrected or enhanced:
* The CONNECTEDLINE() and REDIRECTING() dialplan functions were
consolidated into func_callerid.c to share party id handling code.
* CALLERPRES() is now deprecated because the name and number have their
own presentation values.
* Fixed app_alarmreceiver.c write_metadata(). The workstring[] could
contain garbage. It also can only contain the caller id number so using
ast_callerid_parse() on it is silly. There was also a typo in the
CALLERNAME if test.
* Fixed app_rpt.c using ast_callerid_parse() on the channel's caller id
number string. ast_callerid_parse() alters the given buffer which in this
case is the channel's caller id number string. Then using
ast_shrink_phone_number() could alter it even more.
* Fixed caller ID name and number memory leak in chan_usbradio.c.
* Fixed uninitialized char arrays cid_num[] and cid_name[] in
sig_analog.c.
* Protected access to a caller channel with lock in chan_sip.c.
* Clarified intent of code in app_meetme.c sla_ring_station() and
dial_trunk(). Also made save all caller ID data instead of just the name
and number strings.
* Simplified cdr.c set_one_cid(). It hand coded the ast_callerid_merge()
function.
* Corrected some weirdness with app_privacy.c's use of caller
presentation.
Review: https://reviewboard.asterisk.org/r/702/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@276347 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r275773 | jpeeler | 2010-07-12 15:34:51 -0500 (Mon, 12 Jul 2010) | 12 lines
Make user removals and traversals thread safe in meetme.
Race conditions present in meetme involving the user list where a lack of
locking has the potential for a user to be removed during a traversal or as in
the case of the reporter after checking if the list is empty could cause a
crash. Fixing this was done by convering the userlist to an ao2 container.
(closes issue #17390)
Reported by: Vince
Review: https://reviewboard.asterisk.org/r/746/
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@276074 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This adds a generic API for accommodating IPv6 and IPv4 addresses
within Asterisk. While many files have been updated to make use of the
API, chan_sip and the RTP code are the files which actually support
IPv6 addresses at the time of this commit. The way has been paved for
easier upgrading for other files in the near future, though.
Big thanks go to Simon Perrault, Marc Blanchet, and Jean-Philippe Dionne
for their hard work on this.
(closes issue #17565)
Reported by: russell
Patches:
asteriskv6-test-report.pdf uploaded by russell (license 2)
Review: https://reviewboard.asterisk.org/r/743
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@274783 65c4cc65-6c06-0410-ace0-fbb531ad65f3