Say you wanted to include variables in an application map and have those
variables substituted and passed along to the application being executed;
currently this does not happen.
This patch adds this ability to pass channel variable values to an
application before being executed.
ASTERISK-22608 #close
Reported by: Michael L. Young
patches:
features_substitute_arguments_v2.diff
uploaded by Michael L. Young (license 5026)
Review: https://reviewboard.asterisk.org/r/3819/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@419252 65c4cc65-6c06-0410-ace0-fbb531ad65f3
* Create a Stasis bridge sub-class to propagate linkedids and
accountcodes.
* Fixed the basic bridge sub-class to update peeraccount codes when the
number of channels in the bridge drops back down to two parties.
* Refactored ast_bridge_channel_update_accountcodes() to handle channels
joining/leaving the bridge.
* Fixed the basic bridge sub-class to not call the base bridge class pull
method twice.
AFS-105 #close
ASTERISK-23852 #close
Reported by: Richard Mudgett
Review: https://reviewboard.asterisk.org/r/3720/
........
Merged revisions 418225 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@418226 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch allows the current owner of a channel to define various
feature hooks to be made available once the channel has entered a
bridge. This includes any hooks that are setup on the
ast_bridge_features struct such as DTMF hooks, bridge event hooks
(join, leave, etc.), and interval hooks.
Review: https://reviewboard.asterisk.org/r/3649/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@417361 65c4cc65-6c06-0410-ace0-fbb531ad65f3
During some performance testing of Asterisk with AGI, ARI, and lots of Local
channels, we noticed that there's quite a hit in performance during channel
creation and releasing to the dialplan (ARI continue). After investigating
the performance spike that occurs during channel creation, we discovered
that we create a lot of channel snapshots that are technically unnecessary.
This includes creating snapshots during:
* AGI execution
* Returning objects for ARI commands
* During some Local channel operations
* During some dialling operations
* During variable setting
* During some bridging operations
And more.
This patch does the following:
- It removes a number of fields from channel snapshots. These fields were
rarely used, were expensive to have on the snapshot, and hurt performance.
This included formats, translation paths, Log Call ID, callgroup, pickup
group, and all channel variables. As a result, AMI Status,
"core show channel", "core show channelvar", and "pjsip show channel" were
modified to either hit the live channel or not show certain pieces of data.
While this is unfortunate, the performance gain from this patch is worth
the loss in behaviour.
- It adds a mechanism to publish a cached snapshot + blob. A large number of
publications were changed to use this, including:
- During Dial begin
- During Variable assignment (if no AMI variables are emitted - if AMI
variables are set, we have to make snapshots when a variable is changed)
- During channel pickup
- When a channel is put on hold/unhold
- When a DTMF digit is begun/ended
- When creating a bridge snapshot
- When an AOC event is raised
- During Local channel optimization/Local bridging
- When endpoint snapshots are generated
- All AGI events
- All ARI responses that return a channel
- Events in the AgentPool, MeetMe, and some in Queue
- Additionally, some extraneous channel snapshots were being made that were
unnecessary. These were removed.
- The result of ast_hashtab_hash_string is now cached in stasis_cache. This
reduces a large number of calls to ast_hashtab_hash_string, which reduced
the amount of time spent in this function in gprof by around 50%.
#ASTERISK-23811 #close
Reported by: Matt Jordan
Review: https://reviewboard.asterisk.org/r/3568/
........
Merged revisions 416211 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@416216 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch is a re-do of r414122.
When r414122 was merged, a major problem with it was uncovered. UNBRIDGE soft
hangup flags have a catastrophic effect on the pbx core if they leak out from
the bridge layer: the channel gets hung up. With the number of threads
involved in a blind transfer, and with the initial patch, it was likely that
this would occur. This caused a large number of test failures
This patch is nearly identical with the one proposed in r414122, save for the
following changes:
- We explicitly clear the UNBRIDGE flag when setting an after goto on a
channel in a bridge
- Defensively, if we encounter an UNBRIDGE flag in the pbx core, we handle it
https://reviewboard.asterisk.org/r/3585/
........
Merged revisions 415443 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@415444 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch fixes issues with direct media bridges that occur after a blind
transfer. These issues were caught by the (currently failing)
pjsip/transfers/blind_transfer/caller_direct_media test.
The test currently fails primarily for two reasons:
(1) When Bob and Charlie (the transfer target and the transfer destination)
enter a bridge together, the framehook remains on the transfer target
channel until both channels are in the bridge. As it consumes voice frames,
the initial bridge type is a simple bridge. The framehook is removed when
both channels are in the bridge; however, this does not currently cause the
bridging framework to re-evaluate the bridge. This patch adds a
AST_SOFTHANGUP_UNBRIDGE poke to the transfer target channel when a
framehook is removed so the bridge can re-evaluate itself.
(2) When a channel leaves a native RTP bridge, it may be leaving due to being
hung up. Sending a re-INVITE to a channel that is about to be hung up is
not nice - in fact, there's a good chance we'll send the BYE request before
the channel has had a chance to send back a 200 OK. To be somewhat nicer,
this patch adds a function to channel.h that allows the bridging framework
to query for exactly why a channel is leaving a bridge via the channel's
soft hangup flags. This allows it to only send the re-INVITE if there's a
chance the channel will survive the native bridging experience.
Review: https://reviewboard.asterisk.org/r/3535/
........
Merged revisions 414122 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@414123 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Playing back a file to a channel in an ARI bridge would attempt to wait until
the playback concluded before returning. The method used involved signaling the
waiting thread in the ARI custom playback function.
The problem with this is that there were some corner cases that were not accounted for:
* If a bridge channel could not be found, then we never would attempt the playback but
would still attempt to wait for the playback to complete.
* If the bridge playfile action failed to queue, we would still attempt to wait for the
playback to complete.
* If the bridge playfile action were queued but some circumstance caused the playback
not to occur (the bridge dies, the channel is removed from the bridge), then we would
never be notified.
The solution to this is to move the waiting logic into the bridge code. A new bridge
API function is added to queue a synchronous action on a bridge. The waiting thread
is notified when the queued frame has been freed, either due to an error occurring
or due to successful playback. As a failsafe, the waiting thread has a 10 minute
timeout just in case there is a frame leak somewhere.
Review: https://reviewboard.asterisk.org/r/3338
........
Merged revisions 410673 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@410684 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Much needed was a way to assign id to objects on creation, and
much change was necessary to accomplish it. Channel uniqueids
and linkedids are split into separate string and creation time
components without breaking linkedid propgation. This allowed
the uniqueid to be specified by the user interface - and those
values are now carried through to channel creation, adding the
assignedids value to every function in the chain including the
channel drivers. For local channels, the second channel can be
specified or left to default to a ;2 suffix of first. In ARI,
bridge, playback, and snoop objects can also be created with a
specified uniqueid.
Along the way, the args order to allocating channels was fixed
in chan_mgcp and chan_gtalk, and linkedid is no longer lost as
masquerade occurs.
(closes issue ASTERISK-23120)
Review: https://reviewboard.asterisk.org/r/3191/
........
Merged revisions 410157 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@410158 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Original commit message by mmichelson (asterisk 12 r403311):
"This adds channel locks around calls to create channel snapshots as well
as other functions which operate on a channel and then end up
creating a channel snapshot. Functions that expect the channel to be
locked prior to being called have had their documentation updated to
indicate such."
The above was initially committed and then reverted at r403398. The problem
was found to be in core_local.c in the publish_local_bridge_message function.
The ast_unreal_lock_all function locks and adds a reference to the returned
channels and while they were being unlocked they were not being unreffed when
no longer needed. Fixed by unreffing the channels.
Also in bridge.c a lock was obtained on "other->chan", but then an attempt was
made to unlock "other" and not the previously locked channel. Fixed by
unlocking "other->chan"
(closes issue ASTERISK-22709)
Reported by: John Bigelow
........
Merged revisions 404237 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@404260 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This adds channel locks around calls to create channel snapshots as well
as other functions which operate on a channel and then end up
creating a channel snapshot. Functions that expect the channel to be
locked prior to being called have had their documentation updated to
indicate such.
........
Merged revisions 403311 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@403314 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The original issue noted that the bridge is orphaned when res_parking.so
is not loaded and a call uses the dial kK flags.
A similar issue happens when only one of the park flags is used. In this
case you have the bridge with one or the other channel left in it. The
channel and bridge will stay around until the channel hangs up.
* Fixed the initial bridge channel push failure to act as if the channel
were kicked out of the bridge. The bridge then decides if it needs to be
dissolved.
(closes issue ASTERISK-22629)
Reported by: Kevin Harwell
Review: https://reviewboard.asterisk.org/r/2928/
........
Merged revisions 401424 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@401425 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This particular debug message, during a stress test, was logged so
often that it appeared that there may be a memory leak in the logger
code. In actuality, there was no memory leak, but the logger thread
was having a hard time keeping up with the demands of the rest of the
system.
Since this debug message has no value at all, the best way to fix the
problem was to just remove the message.
(closes issue AST-1225)
reported by John Bigelow
Patches:
spammy_log.diff uploaded by Mark Michelson (License #5049)
........
Merged revisions 401364 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@401365 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The Dial, Queue, and FollowMe applications need to inhibit the bridging
initial connected line exchange in order to support the 'I' option.
* Replaced the pass_reference flag on ast_bridge_join() with a flags
parameter to pass other flags defined by enum ast_bridge_join_flags.
* Replaced the independent flag on ast_bridge_impart() with a flags
parameter to pass other flags defined by enum ast_bridge_impart_flags.
* Since the Dial, Queue, and FollowMe applications are now the only
callers of ast_bridge_call() and ast_bridge_call_with_flags(), changed the
calling contract to require the initial COLP exchange to already have been
done by the caller.
* Made all callers of ast_bridge_impart() check the return value. It is
important. As a precaution, I also made the compiler complain now if it
is not checked.
* Did some cleanup in parking_tests.c as a result of checking the
ast_bridge_impart() return value.
An independent, but associated change is:
* Reduce stack usage in ast_indicate_data() and add a dropping redundant
connected line verbose message.
(closes issue ASTERISK-22072)
Reported by: Joshua Colp
Review: https://reviewboard.asterisk.org/r/2845/
........
Merged revisions 399136 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@399138 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When a channel with the OUTGOING flag leaves a bridge, and it will survive
being pulled from the bridge (either because it will execute dialplan,
go into another bridge, or live in a friendly autoloop), we have to clear
the OUTGOING flag. This is the signal to the CDR engine that this channel
is no longer a second class citizen, i.e., it is not "dialed".
The soft hangup flags are only half the picture. If a channel is being
moved from one bridge to another, the soft hangup flags aren't set; however,
the state of the bridge_channel will not be hung up. Since the channel does
not have one of the two hang up states, that implies that the channel is
still technically alive.
This patch modifies the check so that it checks both the soft hangup flags
as well as the bridge_channel state. If either suggests that the channel
is going to persist, we clear the OUTGOING flag.
........
Merged revisions 397690 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@397691 65c4cc65-6c06-0410-ace0-fbb531ad65f3
DTMF start/end and hold/unhold events have state because a DTMF begin
event and hold event must be ended by something.
The following cases need to be handled when a channel is moved around in
the system.
* When a channel leaves a bridge it may owe a DTMF end event to the
bridge.
* When a channel leaves a bridge it may owe an UNHOLD event to the bridge.
(This case is explicitly ignored because things like transfers need
explicit control over this.)
* When a channel leaves the bridging system it may need to simulate a DTMF
end event to the channel.
* When a channel leaves the bridging system it may need to simulate an
UNHOLD event to the channel.
The patch also fixes the following:
* Fixes playing a file and restarting MOH using the latest MOH class used.
(closes issue ASTERISK-22043)
Reported by: Matt Jordan
Review: https://reviewboard.asterisk.org/r/2791/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@397577 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The cause code needs to be passed from the disconnecting channel to the
bridge peers if the disconnecting channel dissolves the bridge.
* Made the call to an app_agent_pool agent disconnect with the busy cause
code if the agent does not ack the call in time or hangs up before acking
the call.
(closes issue ASTERISK-22042)
Reported by: Matt Jordan
Review: https://reviewboard.asterisk.org/r/2772/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@397472 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Resync the abstract jitter buffer on the following additional control
frames:
AST_CONTROL_HOLD
AST_CONTROL_UNHOLD
AST_CONTROL_T38_PARAMETERS
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@397440 65c4cc65-6c06-0410-ace0-fbb531ad65f3
* Added an option flags parameter to interval hooks. Interval hooks now
can specify if the callback will affect the media path or not.
* Added an option flags parameter to the bridge action custom callback.
The action callback now can specify if the callback will affect the media
path or not.
* Made the holding bridge technology reexamine the participant idle mode
option whenever the entertainment is restarted.
* Fixed app_agent_pool waiting agents needlessly starting and stopping MOH
every second by specifying the heartbeat interval hook as not affecting
the media path.
* Fixed app_agent_pool agent alert from restarting the MOH after the alert
beep. The agent entertainment is now changed from MOH to silence after
the alert beep.
* Fixed holding bridge technology to defer starting the entertainment. It
was previously a mixture of immediate and deferred.
* Fixed holding bridge technology to immediately stop the entertainment.
It was previously a mixture of immediate and deferred. If the channel
left the bridging system, any deferred stopping was discarded before
taking effect.
* Miscellaneous holding bridge technology rework coding improvements.
Review: https://reviewboard.asterisk.org/r/2761/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@397294 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This change protects accesses of res_parking such that it can unload
safely once transient uses of its registered functions are complete.
The parking API has been restructured such that its consumers do not
have access to the vtable exposed by the parking provider, but instead
route through stubs to prevent consumers from holding on to function
pointers.
This adds calls to all the parking unload functions and moves
application loading and unloading into functions in
parking_applications.c similar to the rest of the parts of res_parking.
Review: https://reviewboard.asterisk.org/r/2763/
(closes issue ASTERISK-22142)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@396890 65c4cc65-6c06-0410-ace0-fbb531ad65f3
SIP/foo -- Local;1==Local;2 -- .... -- Local;1==Local;2 -- SIP/bar
Kick a ;1 channel and the chain toward SIP/foo goes away.
Kick a ;2 channel and the chain toward SIP/bar goes away.
This can leave a local channel chain between the kicked ;1 and ;2 channels
that are orphaned until you manually request one of those channels to
hangup or request the bridge to dissolve.
* Added ast_bridge_kick() as a companion to ast_bridge_remove(). The
functional difference is that ast_bridge_kick() may dissolve the bridge as
a result of the channel leaving the bridge.
* Made CLI "bridge kick <bridge> <channel>" use ast_bridge_kick() instead
of ast_bridge_remove() so the bridge can dissolve if needed.
* Renamed bridge_channel_handle_hangup() to ast_bridge_channel_kick() and
made it accessible to other files.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@396877 65c4cc65-6c06-0410-ace0-fbb531ad65f3
By their nature, the connected line and redirecting interception routines
are not supposed to affect the channel's media. Therefore, they should
not suspend and unsuspend the channel while running. The
suspend/unsuspend operations could be expensive depending upon the bridge
and channel technology involved.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@396814 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The Bridge API DTMF hook matching would not deal with DTMF end events
only. It required a DTMF begin event to start matching the DTMF hooks.
There are many places in Asterisk where code only generates DTMF end
events without the corresponding begin event. One such place is the AMI
action Atxfer.
* Fixed DTMF hook matching if there is a string of DTMF frames in the read
queue. We could potentially miss some of them before.
* Fixed AMI Atxfer action documentation.
(closes issue ASTERISK-22037)
Reported by: Matt Jordan
Review: https://reviewboard.asterisk.org/r/2752/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@396732 65c4cc65-6c06-0410-ace0-fbb531ad65f3
These problems were all caught by a test in the Asterisk Test Suite that
originated some Local channels and attempted to move the ;2 half of the Local
channel into a bridge using the Bridge AMI action.
(1) When originating a channel, the Newchannel event is emitted quickly;
however, the ;2 channel will not have a pbx thread assigned to it until
after the outbound 'dialing' for the ;1 is complete. Thus, there is a period
of time where the outside world "knows" of the channel's existence and can
influence it but Asterisk has not yet started the dialplan execution thread.
If a Bridge AMI action is taken on the channel, the channel appears to be a
Dialed channel with no PBX thread; hence, the channel will be imparted into
the Bridge by first 'yanking' the channel. At the same time, a race condition
can occur after the yank (but before entering the bridge) when ;1 answers
and starts a PBX on the ;2. The end result currently is an assertion failure
in the Bridging API, as a channel with a PBX is imparted into the Bridge.
There's no way to prevent AMI from attempting to Bridge a channel
immediately after creation; likewise, holding the channel lock through the
entire Dial operation is unwise (and impossible). Instead of treating the
presence of a PBX thread as an error, we simply bail out of the adding the
channel to the bridge through ast_bridge_impart. The Bridge action will
then fail - but we avoid a situation where the channel is both executing
a PBX thread and simultaneously being given a separate thread in the
bridging system (which would be a "bad thing"). Since imparting a channel
with a PBX *can* occur and is not a programming error, the asserts have been
removed.
(2) When the first condition occurs, we have to take one of two actions: either
hangup the yanked channel as it did not enter the bridge, or deref it
because we don't own it. We can determine if we own it or not by testing
for the presence of the PBX thread. If we hung it up directly, we'd crash.
(3) bridge_find_channel does not increase the reference count of the
ast_bridge_channel object. The RAII_VAR usage in ast_bridge_add_channel
thus created a ticking time bomb in whatever bridge the channel moved into,
as the destructor for the ast_bridge_channel object would be called.
Review: https://reviewboard.asterisk.org/r/2741/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@396543 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The lonely flag is an optional flag for bridge channels that will
make them leave a bridge when a channel leaves if only lonely
channels are in the bridge at that point. This is useful for things
like ending recording and playback channels when they cease to be
interacting with other channels in the bridge.
(closes issue ASTERISK-22117)
Reported by: Matt Jordan
Review: https://reviewboard.asterisk.org/r/2721/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@396497 65c4cc65-6c06-0410-ace0-fbb531ad65f3
* BridgeEnter now contains the unique ID of the channel that is to be swapped out, if applicable.
* There is a ParkedCallSwap event that is sent when a parked channel has a new channel take its place.
(closes issue ASTERISK-22193)
reported by Mark Michelson
Review: https://reviewboard.asterisk.org/r/2712
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@396107 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch does the following:
* It adds support for externally initiated parking requests. In particular,
chan_skinny has a protocol level message that initiates a call park.
This patch now supports that option, as well as the protocol specific
mechanisms in chan_dahdi/sig_analog and chan_mgcp.
* A parking bridge features virtual table has been added that provides
access to the parking functionality that the Bridging API needs. This
includes requests to park an entire 'call' (with little or no additional
information, thank you chan_skinny), perform a blind transfer to a parking
extension, determine if an extension is a parking extension, as well as the
actual "do the parking" request from the Bridging API.
* Refactoring in chan_mgcp, chan_skinny, and chan_dahdi to make use of the new
functions
* The removal of some - but not all - dead parking code from features.c
This also fixed blind transferring a multi-party bridge to a parking lot (which
was implemented, but had at least one code path where using the parking features
kK might not have worked)
Review: https://reviewboard.asterisk.org/r/2710
(closes issue ASTERISK-22134)
Reported by: Matt Jordan
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@396028 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Most hook callbacks did not need the bridge parameter. The pointer value
could become invalid if the channel is moved to another bridge while it is
executing.
* Fixed some issues in feature_attended_transfer() as a result.
* Reduce the bridge inhibit count in
attended_transfer_properties_shutdown() after it has restored the bridge
channel hooks.
* Removed basic bridge requirement on feature_blind_transfer(). It does
not require the basic bridge like feature_attended_transfer().
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@395574 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Changes arguments for BridgeWait from BridgeWait(role, options) to
BridgeWait(bridge_name, role, options). Now multiple holding bridges may
be created and referenced by this application.
(closes issue ASTERISK-21922)
Reported by: Matt Jordan
Review: https://reviewboard.asterisk.org/r/2642/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@395509 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch renames the bridging* files to bridge*. This may seem pedantic
and silly, but it fits better in line with current Asterisk naming conventions:
* channel is not "channeling"
* monitor is not "monitoring"
etc.
A bridge is an object. It is a first class citizen in Asterisk. "Bridging" is
the act of using a bridge on a set of channels - and the API that fulfills that
role is more than just the action.
(closes issue ASTERISK-22130)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@395378 65c4cc65-6c06-0410-ace0-fbb531ad65f3