This patch adds named calledgroups/pickupgroups to Asterisk. Named groups are
implemented in parallel to the existing numbered callgroup/pickupgroup
implementation. However, unlike the existing implementation, which is limited
to a maximum of 64 defined groups, the number of defined groups allowed for
named callgroups/pickupgroups is effectively unlimited.
Named groups are configured with the keywords "namedcallgroup" and
"namedpickupgroup". This corresponds to the numbered group definitions of
"callgroup" and "pickupgroup". Note that as the implementation of named groups
coexists with the existing numbered implementation, a defined named group of
"4" does not equate to numbered group 4.
Support for the named groups has been added to the SIP, DAHDI, and mISDN channel
drivers.
Review: https://reviewboard.asterisk.org/r/2043
Uploaded by:
Guenther Kelleter(license #6372)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@370831 65c4cc65-6c06-0410-ace0-fbb531ad65f3
........
r369001 | kpfleming | 2012-06-15 10:56:08 -0500 (Fri, 15 Jun 2012) | 11 lines
Add support-level indications to many more source files.
Since we now have tools that scan through the source tree looking for files
with specific support levels, we need to ensure that every file that is
a component of a 'core' or 'extended' module (or the main Asterisk binary)
is explicitly marked with its support level. This patch adds support-level
indications to many more source files in tree, but avoids adding them to
third-party libraries that are included in the tree and to source files
that don't end up involved in Asterisk itself.
........
r369002 | kpfleming | 2012-06-15 10:57:14 -0500 (Fri, 15 Jun 2012) | 3 lines
Add a script to enable finding source files without support-levels defined.
........
Merged revisions 369001-369002 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 369005 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@369013 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r317478 | russell | 2011-05-05 17:53:45 -0500 (Thu, 05 May 2011) | 12 lines
Fix some consistency issues with jitterbuffer config.
Store the defaults noted in the sample config files in the jitterbuffer config
data structure. This makes the CLI commands that output these settings show
the right thing. Also only show the settings that are relevant in the settings
CLI commands, based on which jitterbuffer is selected and whether it's enabled.
(closes issue #19083)
Reported by: rgagnon
Patches:
issue-19083-trunk-r313139.diff uploaded by rgagnon (license 1202)
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@317479 65c4cc65-6c06-0410-ace0-fbb531ad65f3
From reviewboard:
Digium has a commercial customer who has made extensive use of the connected party and
redirecting information present in later versions of Asterisk Business Edition and which
is to be in the upcoming 1.8 release. Through their use of the feature, new problems and solutions
have come about. This patch adds several enhancements to maximize usage of the connected party
and redirecting information functionality.
First, Asterisk trunk already had connected line interception macros. These macros allow you to
manipulate connected line information before it was sent out to its target. This patch adds the
same feature except for redirecting information instead.
Second, the ast_callerid and ast_party_id structures have been enhanced to provide a "tag." This
tag can be set with func_callerid, func_connectedline, func_redirecting, and in the case of DAHDI,
mISDN, and SIP channels, can be set in a configuration file. The idea behind the callerid tag is
that it can be set to whatever value the administrator likes. Later, when running connected line
and redirecting macros, the admin can read the tag off the appropriate structure to determine what
action to take. You can think of this sort of like a channel variable, except that instead of having
the variable associated with a channel, the variable is associated with a specific identity within
Asterisk.
Third, app_dial has two new options, s and u. The s option lets a dialplan writer force a specific
caller ID tag to be placed on the outgoing channel. The u option allows the dialplan writer to force
a specific calling presentation value on the outgoing channel.
Fourth, there is a new control frame subclass called AST_CONTROL_READ_ACTION added. This was added
to correct a very specific situation. In the case of SIP semi-attended (blond) transfers, the party
being transferred would not have the opportunity to run a connected line interception macro to
possibly alter the transfer target's connected line information. The issue here was that during a
blond transfer, the SIP transfer code has no bridged channel on which to queue the connected line
update. The way this was corrected was to add this new control frame subclass. Now, we queue an
AST_CONTROL_READ_ACTION frame on the channel on which the connected line interception macro should
be run. When ast_read is called to read the frame, ast_read responds by calling a callback function
associated with the specific read action the control frame describes. In this case, the action taken
is to run the connected line interception macro on the transferee's channel.
Review: https://reviewboard.asterisk.org/r/652/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@263541 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When configuring the adaptive jitterbuffer, the target_extra
value not only could not be set from the configuration, but was
not even being set to its proper default. This value is required
in order for the adaptive jitterbuffer to work correctly. To resolve
this a config option has been added to expose this value to the conf
files, and a default value is provided when no config specific value
is present.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@249893 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r222797 | rmudgett | 2009-10-08 11:33:06 -0500 (Thu, 08 Oct 2009) | 12 lines
Fix memory leak if chan_misdn config parameter is repeated.
Memory leak when the same config option is set more than once in an
misdn.conf section. Why must this be considered? Templates! Defining a
template with default port options and later adding to or overriding some
of them.
Patches:
memleak-misdn.patch
JIRA ABE-1998
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@222799 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r212498 | jpeeler | 2009-08-17 11:34:56 -0500 (Mon, 17 Aug 2009) | 12 lines
Fix segfault when reloading chan_misdn.
If more ports were specified than configured in misdn.conf a reload would crash
asterisk. The problem was the unconfigured port was using data from the
previously configured port. When the data for an unconfigured port was freed a
crash would result from the double free.
(closes issue #12113)
Reported by: agupta
Patches:
bug12113.patch uploaded by jpeeler (license 325)
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@212506 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch adds 'const' tags to a number of Asterisk APIs where they are appropriate (where the API already demanded that the function argument not be modified, but the compiler was not informed of that fact). The list includes:
- CLI command handlers
- CLI command handler arguments
- AGI command handlers
- AGI command handler arguments
- Dialplan application handler arguments
- Speech engine API function arguments
In addition, various file-scope and function-scope constant arrays got 'const' and/or 'static' qualifiers where they were missing.
Review: https://reviewboard.asterisk.org/r/251/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@196072 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Select what to do with outgoing COLP information on this port.
0 - Send out COLP information unaltered. (default)
1 - Force COLP to restricted on all outgoing COLP information.
2 - Do not send COLP information.
outgoing_colp=0
Also fixed sending the EctInform message so it always has the
required redirectionNumber parameter when the status is active.
JIRA ABE-1853
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@194479 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The channel drivers which have been most heavily tested with these enhancements are
chan_sip and chan_misdn. Further work is being done to add Q.SIG support and will be
introduced in a later commit. chan_skinny has code added to it here, but according
to user pj, the support on chan_skinny is not working as of now. This will be fixed in
a later commit.
A special thanks goes out to bugtracker user gareth for getting the ball rolling and
providing the initial support for this work. Without his initial work on this, this would
not have been nearly as painless as it was.
This functionality has been tested by Digium's product quality department, as well as a
customer site running thousands of calls every day. In addition, many many many many bugtracker
users have tested this, too.
(closes issue #8824)
Reported by: gareth
Review: http://reviewboard.digium.com/r/201
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@186525 65c4cc65-6c06-0410-ace0-fbb531ad65f3
because SPRINTF() use non-literal format strings (which cannot be checked), move it into its own module so the rest of func_strings can benefit from format string checking
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@159774 65c4cc65-6c06-0410-ace0-fbb531ad65f3
* Made bearer2str() use allowed_bearers_array[]
* Made use the causes.h defines instead of hardcoded numbers.
* Made use Asterisk presentation indicator values if either of the
mISDN presentation or screen options are negative.
* Updated the misdn_set_opt application option descriptions.
* Renamed the awkward Caller ID presentation misdn_set_opt
application option value not_screened to restricted.
Deprecated the not_screened option value.
channels/misdn/isdn_lib.c
* Made use the causes.h defines instead of hardcoded numbers.
* Fixed some spelling errors and typos.
* Added all defined facility code strings to fac2str().
channels/misdn/isdn_lib.h
* Added doxygen comments to struct misdn_bchannel.
channels/misdn/isdn_lib_intern.h
* Added doxygen comments to struct misdn_stack.
channels/misdn_config.c
configs/misdn.conf.sample
* Updated the mISDN presentation and screen parameter descriptions.
doc/tex/misdn.tex
* Updated the misdn_set_opt application option descriptions.
* Fixed some spelling errors and typos.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@138738 65c4cc65-6c06-0410-ace0-fbb531ad65f3
build times - tested, there is no measureable difference before and
after this commit.
In this change:
use asterisk/compat.h to include a small set of system headers:
inttypes.h, unistd.h, stddef.h, stddint.h, sys/types.h, stdarg.h,
stdlib.h, alloca.h, stdio.h
Where available, the inclusion is conditional on HAVE_FOO_H as determined
by autoconf.
Normally, source files should not include any of the above system headers,
and instead use either "asterisk.h" or "asterisk/compat.h" which does it
better.
For the time being I have left alone second-level directories
(main/db1-ast, etc.).
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@89333 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r89169 | crichter | 2007-11-12 10:45:36 +0100 (Mo, 12 Nov 2007) | 1 line
aded ntkeepcalls option, to avoid droÃpping calls when the L2 goes down on a PTP link. There are some pbx which do turn off the L1 for a very short while and restart it immediately. normally T310 should be started and after 10 seconds or so the calls should be dropped, this is a simple fix wihtout this timer.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@89174 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r83432 | russell | 2007-09-21 09:37:20 -0500 (Fri, 21 Sep 2007) | 4 lines
gcc 4.2 has a new set of warnings dealing with cosnt pointers. This set of
changes gets all of Asterisk (minus chan_alsa for now) to compile with gcc 4.2.
(closes issue #10774, patch from qwell)
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@83433 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r83023 | crichter | 2007-09-19 11:31:55 +0200 (Mi, 19 Sep 2007) | 1 line
added 'astdtmf' option to allow configuring the asterisk dtmf detector instead of the mISDN_dsp ones. also added the patch from irroot #10190, so that dtmf tones detected by the asterisk detector are passed outofband to asterisk, to make any use of dtmf tones at all.
........
r83024 | crichter | 2007-09-19 11:32:42 +0200 (Mi, 19 Sep 2007) | 1 line
removed comment which violates the coding guidelines.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@83025 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
................
r59774 | crichter | 2007-04-03 09:20:27 +0200 (Di, 03 Apr 2007) | 17 lines
Merged revisions 59623-59624,59639 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.2
........
r59623 | crichter | 2007-04-02 09:12:24 +0200 (Mo, 02 Apr 2007) | 1 line
we can now make 30 channels on a PRI (before we forgot chan 31..)
........
r59624 | crichter | 2007-04-02 09:25:54 +0200 (Mo, 02 Apr 2007) | 1 line
don't be verbose if no need
........
r59639 | crichter | 2007-04-02 14:08:12 +0200 (Mo, 02 Apr 2007) | 1 line
added option which allows us to accept incoming SETUP Messages without automatically sending Proceeding or Setup Acknowledge, this is useful with some broken switches and if you want to Release incoming calls without previously having acknowledged them. The new option is noautorespond_on_setup=yes|no default is no, so we don't break the existing behaviour
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@64954 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
................
r59804 | nadi | 2007-04-03 13:02:46 +0200 (Di, 03 Apr 2007) | 15 lines
Merged revisions 59788,59803 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.2
........
r59788 | nadi | 2007-04-03 11:37:00 +0200 (Di, 03 Apr 2007) | 2 lines
Use the new sysfs way of mISDN 1.2 to check if a port is NT or not.
........
r59803 | nadi | 2007-04-03 12:40:58 +0200 (Di, 03 Apr 2007) | 2 lines
ptp is the 5th bit, not the 4th.
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@59805 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r59202 | nadi | 2007-03-26 17:25:53 +0200 (Mo, 26 Mär 2007) | 4 lines
* mISDN >= 1.2 provides a dsp pipeline for i.e. echo cancellation modules, make chan_misdn use it.
* add a check for linux/mISDNdsp.h to configure.ac and update the autogenerated files: 'configure', 'autoconfig.h.in'
(the 'configure' script was not in sync with the latest configure.ac, so the diff is a bit bigger than expected).
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@59203 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
................
r49313 | crichter | 2007-01-03 10:06:50 +0100 (Mi, 03 Jan 2007) | 41 lines
Merged revisions 48319,48321,48467,48552,48576,49135,49303 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.2
........
r48319 | crichter | 2006-12-06 15:35:25 +0100 (Mi, 06 Dez 2006) | 1 line
changed a few debugs to higher debug levels
........
r48321 | crichter | 2006-12-06 16:48:45 +0100 (Mi, 06 Dez 2006) | 1 line
added the export and import of the MISDN_ADDRESS_COMPLETE Variable to inidcate wether the extension is already completely dialed or if there might come additional digits by information elements. also added some docs for that.
........
r48467 | crichter | 2006-12-14 14:03:49 +0100 (Do, 14 Dez 2006) | 1 line
removed FIXUP state. added check for channel allocation conflict when we create a setup while the other site creates a setup on the same channel, besides the check we resolve this conflict.
........
r48552 | crichter | 2006-12-18 11:19:39 +0100 (Mo, 18 Dez 2006) | 1 line
when our PTP Partner sends us a SETUP with a preselected channel we just accept it, even when we're NT. added some checks for segfaults.
........
r48576 | crichter | 2006-12-19 14:08:51 +0100 (Di, 19 Dez 2006) | 1 line
when we reject a channel, because it's in use already, we shouldn't process the setup anymore. made the channel allocation a bit easier and more understandable, removed a few unused lines
........
r49135 | crichter | 2007-01-02 11:07:22 +0100 (Di, 02 Jan 2007) | 1 line
added check for channel ranges in the set/empty channel functions. set pmp_l1_check default to no. added misdn restart pid cli command. added cleaning of channel when we send a RELEASE_COMPLETE.
........
r49303 | crichter | 2007-01-03 09:24:00 +0100 (Mi, 03 Jan 2007) | 9 lines
* Added check for bridging in misdn_call to avoid setting echocancellation
when 2 mISDN channels are involved and when bridging is set. That lead
to a kernel panic before under different situations, because we switched
about 2 times between hardware bridging and echocancelation
* readded MISDN_URATE variable which got lost before, this should make app_v110
work again
* fixed typo
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@49321 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
................
r46351 | crichter | 2006-10-27 11:49:20 +0200 (Fr, 27 Okt 2006) | 9 lines
Merged revisions 46176 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.2
........
r46176 | crichter | 2006-10-25 10:41:59 +0200 (Mi, 25 Okt 2006) | 1 line
added nttimeout option to configure wether we disconnect calls on NT timeouts or not during an overlapdial session
........
................
r46352 | crichter | 2006-10-27 11:58:44 +0200 (Fr, 27 Okt 2006) | 1 line
fixed not compile issue, which was just introduced
................
r46353 | crichter | 2006-10-27 12:03:23 +0200 (Fr, 27 Okt 2006) | 9 lines
Merged revisions 46350 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.2
........
r46350 | crichter | 2006-10-27 11:24:01 +0200 (Fr, 27 Okt 2006) | 1 line
fixed a bug which caused chan_misdn to try to allocate 2 times the same channel on high load, which then caused instability of mISDN. removed a useless function from isdn_lib.c
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@46354 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
................
r44561 | crichter | 2006-10-06 14:50:25 +0200 (Fr, 06 Okt 2006) | 9 lines
Merged revisions 44334 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.2
........
r44334 | crichter | 2006-10-04 17:13:58 +0200 (Mi, 04 Okt 2006) | 1 line
added the option 'reject_cause' to make it possible to set the RELEASE_COMPLETE - cause on the 3. incoming PMP channel, which is automatically rejected because chan_misdn does not support that kind of callwaiting. Therefore chan_misdn supports now 3 incoming channels on a PMP BRI Port. misdn_lib_get_free_bc now gets the info if the requested channel is incoming or outgoing to make the 3. channel possible
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@44841 65c4cc65-6c06-0410-ace0-fbb531ad65f3
* fail on misdn_cfg_init() if elements in the config enum don't match with the config structs in misdn_config.c
* implemented first bits for encoding ISDN facility information elements via ASN.1 descriptions
* using unnamed semaphore for syncing in misdn_thread
* advanced fax detection: configurable detect timeout and context to jump into
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@39378 65c4cc65-6c06-0410-ace0-fbb531ad65f3
* added blocking flag to stack object. A port can be blocked/unblocked from the
cli
* added EVENT_PORT_ALARM to send alarm infos to the chan_misdn.c layer (later
we can add a manager event for that)
* added block_on_alarm option, to block the port whenever a ALARM occurs
* added need_busy flag to indicate if we've sended a CONTROL_BUSY already
* changed a bunch of cb_log(-1,..) to cb_log(0,..) due to funny behaviour in
recent asterisk ast_log messages..
* fixed a few ETSI state violations, especially when finishing calls in
different seldom states
* changed debug levels a lot to make the log more readable in low debuglevels
* some first fixes for the HOLD/RETRIEVE stuff (doesn't work totally still)
* removed the PRECONNECTED state stuff
* added cause 27 when we get a CLEANUP directly after a outgoing SETUP, this
creates a CHANISUNAVAIL instead of a NOANSWER
* removed the addr pointer from "misdn show stacks" that's not needed anymore
and makes the output more unreadable
* added cause saving on RELEASE/RELEASE_COMPLETE
* set cause to 16 on prepare_bc
* removed stack getting from ph_control functions, we don't really need it
there
* added beroec api
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@38801 65c4cc65-6c06-0410-ace0-fbb531ad65f3
* added a signal handler to allow waking up the misdn task thread (that may sleep in a poll call) via misdn_tasks_wakeup().
* overlap_dial functionality implemented.
* fixes a bug which leads to a segfault after reordering config elements in the enum or struct
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@37382 65c4cc65-6c06-0410-ace0-fbb531ad65f3
* removed the state handling from release_chan, and simplified the ast_hangup/ast_queue_hangup stuff
* added pp_l2_check option, for pp lines where the pbx does not initially gets the L2 up
* simplified and fixed a bug in the pid generation code
* fixed a bug in empty_chan, which might cause segfaults and memorry corruptions
* added prepare_bc function, which is sort of the opposite of empty_bc
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@37172 65c4cc65-6c06-0410-ace0-fbb531ad65f3