Both transport and endpoint now check for the existence and readability
of tls certificate and key files before passing them on to pjproject.
This will cause the object to not load rather than waiting for pjproject
to discover that there's a problem when a session is attempted.
NOTE: chan_sip also uses ast_rtp_dtls_cfg_parse but it's located
in build_peer which is gigantic and I didn't want to disturb it.
Error messages will emit but it won't interrupt chan_sip loading.
ASTERISK-25618 #close
Change-Id: Ie43f2c1d653ac1fda6a6f6faecb7c2ebadaf47c9
Reported-by: George Joseph
Tested-by: George Joseph
An earlier commit changed the id of dynamic contacts to contain
a hash instead of the uri. This patch updates status change
logging to show the aor/uri instead of the id. This required
adding the aor id to contact and contact_status and adding
uri to contact_status. The aor id gets added to contact and
contact_status in their allocators and the uri gets added to
contact_status in pjsip_options when the contact_status is
created or updated.
ASTERISK-25598 #close
Reported-by: George Joseph
Tested-by: George Joseph
Change-Id: I56cbec1d2ddbe8461367dd8b6da8a6f47f6fe511
Currently if a channel is transferred out of a bridge, the BRIDGEPEER
variable (also BRIDGEPVTCALLID) remain set even once the channel is
out of the bridge. This patch removes these variables when leaving
the bridge.
ASTERISK-25600 #close
Reported by: Mark Michelson
Change-Id: I753ead2fffbfc65427ed4e9244c7066610e546da
Several issues are addressed here:
- main() is large, and half of it is only used if we're not rasterisk;
fixed by spliting up the daemon part into a separate function.
- Call ast_term_init from rasterisk as well.
- Remove duplicate code reading/writing asterisk history file.
- Attempt to tackle background color issues and color changes that
occur. Tested by starting asterisk -c until the colors stopped
changing at odd locations.
- Remove unused term_prep() and term_prompt() functions.
ASTERISK-25585 #close
Change-Id: Ib641a0964c59ef9fe6f59efa8ccb481a9580c52f
Often, the metric names of statistics we are generating for StatsD have some
dynamic component to them. This can be the name of a particular resource, or
some internal status label in Asterisk. With the current set of functions,
callers of the statsd API must first build the metric name themselves, then
pass this to the API functions. This results in a large amount of boilerplate
code and usage of either fixed length static buffers or dynamic memory
allocation, neither of which is desireable.
This patch adds two new functions to the StatsD API that support a printf
style format specifier for constructing the metric name. A dynamic string,
allocated in threadstorage, is used to build the metric name. This eases
the burden on users of the StatsD API.
Change-Id: If533c72d1afa26d807508ea48b4d8c7b32f414ea
Previously, a trancoding module did not have access to the joint but cached
format. Therefore, the module did not have access to the attributes negotiated
via SDP (line fmtp). Now, a translation module receives the joint format.
ASTERISK-25545 #close
Change-Id: Id6878a989b50573298dab115d3371ea369e1a718
In practical tests, we have seen certain taskprocessors, specifically
Stasis subscription taskprocessors, cross the recently-added high-water
mark and emit a warning. This high-water mark warning is only intended
to be emitted when things have tanked on the system and things are
heading south quickly. In the practical tests, the Stasis taskprocessors
sometimes had a max depth of 180 tasks in them, and Asterisk wasn't in
any danger at all.
As such, this ups the high-water mark to 500 tasks instead. It also
redefines the SIP threadpool request denial number to be a multiple of
the taskprocessor high-water mark.
Change-Id: Ic8d3e9497452fecd768ac427bb6f58aa616eebce
We have observed situations where the SIP threadpool may become
deadlocked. However, because incoming traffic is still arriving, the SIP
threadpool's queue can continue to grow, eventually running the system
out of memory.
This change makes it so that incoming traffic gets rejected with a 503
response if the queue is backed up too much.
Change-Id: I4e736d48a2ba79fd1f8056c0dcd330e38e6a3816
This increases the maximum length of account code's to match
extensions. This ensures it is always possible to set an
accountcode to ${EXTEN} without truncation.
ASTERISK-23904
Reported by: Ben Merrills
Change-Id: If122602304ce03362722eb213a3111b32da5eeb9
Added a new api to res_statsd.c to allow it to receive a
character pointer for the value argument. This allows for a
'+' and a '-' to easily be sent with the value.
ASTERISK-25419
Reported By: Ashley Sanders
Change-Id: Id6bb53600943d27347d2bcae26c0bd5643567611
A previous commit reduced the AST_BUILDOPTS compiler define to
only include options that affected ABI. This included some options
that were previously displayed by cli "core show settings". This
change corrects the CLI display while still restricting buildopts.h
to ABI effecting options only.
ASTERISK-25434 #close
Reported by: Rusty Newton
Change-Id: Id07af6bedd1d7d325878023e403fbd9d3607e325
Add the ability to filter output from pjsip list and show commands
using the "like" predicate like chan_sip.
For endpoints, aors, auths, registrations, identifyies and transports,
the modification was a simple change of an ast_sorcery_retrieve_by_fields
call to ast_sorcery_retrieve_by_regex. For channels and contacts a
little more work had to be done because neither of those objects are
true sorcery objects. That was just removing the non-matching object
from the final container. Of course, a little extra plumbing in the
common pjsip_cli code was needed to parse the "like" and pass the regex
to the get_container callbacks.
Some of the get_container code in res_pjsip_endpoint_identifier was also
refactored for simplicity.
ASTERISK-25477 #close
Reported by: Bryant Zimmerman
Tested by: George Joseph
Change-Id: I646d9326b778aac26bb3e2bcd7fa1346d24434f1
There have been crashes and general instability seen in the pubsub code,
so this patch introduces three changes to increase the stability.
First, the ownership model for subscriptions has been modified. Due to
RLS, subscriptions are stored in memory as a tree structure. Prior to my
patch, the PJSIP subscription was the owner of the subscription tree.
When the PJSIP subscription told us that it was terminating, we started
destroying the subscription tree along with all of the individual leaf
subscriptions that belong to the tree. The problem with this model is
that the two actors in play here, the PJSIP subscription and the
individual leaf subscriptions, need to have joint ownership of the
subscription tree. So now, the PJSIP subscription and the individual
leaf subscriptions each have a reference to the subscription tree. This
way, we will not actually free memory until no players are left that
care. The PJSIP subscription is a bigger stakeholder, in that if the
PJSIP subscription's reference to the subscription tree is removed, the
subscription tree instructs the leaf subscriptions to shut down and drop
their references to the subscription tree when possible. The individual
leaf subscriptions, upon being told to shut down, can drop their stasis
subscriptions or whatever they use to learn of new state, and then drop
their reference to the subscription tree once they are ready to die.
Second, the lifetime of a PJSIP subscription's reference to our
subscription tree has been altered. As I learned from doing a deep dive,
the PJSIP evsub code can tell Asterisk multiple times that the
subscription has been terminated, and not all of these times
are especially helpful. I have altered the message flow that we use for
SIP subscriptions such that we will always drop the PJSIP subscription's
reference to the subscription tree when we send the NOTIFY that
terminates a SIP subscription. This also means that we will now queue
NOTIFY requests to be sent after responding to incoming SUBSCRIBEs so
that we can have predictable state changes from the PJSIP evsub code.
Third, the synchronization of operations has been improved. PJSIP can
call into our code from a serializer thread (e.g. upon receiving an
incoming request) or from the monitor thread (e.g. when a subscription
times out). Because of this, there is the possibility of competing
threads stepping on each other. PJSIP attempts to do some
synchronization on its own by always keeping the dialog lock held when
it calls into us. However, since we end up pushing tasks into the
serializer, the result was that serialized operations were not grabbing
the dialog lock and could, as a result, step on something that was being
attempted by a different thread. Now we ensure that serialized
operations grab the dialog lock, then check for extenuating
circumstances, then proceed with their operation if they can.
Change-Id: Iff2990c40178dad9cc5f6a5c7f76932ec644b2e5
In a realtime based system with a limited number of threadpool threads
it is possible for a deadlock to occur. This happens when permanent
endpoint state is updated, which will cause database queries to be done.
These queries may result in URI validation being done which is done
synchronously using a PJSIP thread. If all PJSIP threads are in use
processing traffic they themselves may be blocked waiting to get the
permanent endpoint container lock when identifying an endpoint.
This change moves URI validation to occur at use time instead of
configuration time. While this comes at a cost of not seeing a problem
until you use it it does solve the underlying deadlock problem.
ASTERISK-25486 #close
Change-Id: I2d7d167af987d23b3e8199e4a68f3359eba4c76a
This patch adds the functions
ast_cdr_modifier_register()
ast_cdr_modifier_unregister()
That work much like ast_cdr_register() and ast_cdr_unregister().
Modules registered will be given a chance to modify (or to do whatever
they want) CDR fields just before they are passed to registered engines.
Thus, for instance, if a module change the "userfield" field of a CDR,
the modified value will be passed to every registered CDR backend for
logging.
ASTERISK-25479 #close
Change-Id: If11d8fd19ef89b1a66ecacf1201e10fcf86ccd56
This patch adds the ability to subscribe to all events. There are two possible
ways to accomplish this:
(1) On initial WebSocket connection. This patch adds a new query parameter,
'subscribeAll'. If present and True, Asterisk will subscribe the
applications to all ARI events.
(2) Via the applications resource. When subscribing in this manner, an ARI
client should merely specify a blank resource name, i.e., 'channels:'
instead of 'channels:12354'. This will subscribe the application to all
resources of the 'channels' type.
ASTERISK-24870 #close
Change-Id: I4a943b4db24442cf28bc64b24bfd541249790ad6
The default_from_user retrieval function was pulling the
default_from_user from the global configuration struct in an unsafe way.
If using a database as a backend configuration store, the global
configuration struct is short-lived, so grabbing a pointer from it
results in referencing freed memory.
The fix here is to copy the default_from_user value out of the global
configuration struct.
Thanks go to John Hardin for discovering this problem and proposing the
patch on which this fix is based.
ASTERISK-25390 #close
Reported by Mark Michelson
Change-Id: I6b96067a495c1259da768f4012d44e03e7c6148c
When Asterisk sends an outbound SIP request, if there is no direct
reason to place a specific value for the username in the From header,
Asterisk would generate a UUID. For example, this would happen when
sending outbound OPTIONS requests when qualifying or when sending
outbound INVITE requests when originating (if no explicit caller ID were
provided). The issue is that some SIP providers reject these sorts of
requests with a "Name too long" error response.
This patch aims to fix this by changing the default outbound username in
From headers to "asterisk". This value can be overridden by changing the
default_from_user option in the global options if desired.
ASTERISK-25377 #close
Reported by Mark Michelson
Change-Id: I6a4d34a56ff73ff4f661b0075aeba5461b7f3190
The keepalive support in res_pjsip_sdp_rtp currently assumes
that a stream will only be negotiated once. This is false.
If the stream is replaced and later added back it can be
negotiated again causing multiple keepalive scheduled items
to exist. This change explicitly deletes the existing
keepalive scheduled item before adding the new one.
The res_pjsip_sdp_rtp module also does not stop RTP
keepalives or timeout timer if the stream has been
replaced. This change adds a callback to the session media
interface to allow a media stream to be stopped without
the resources being destroyed. This allows the scheduled
items and RTP to be stopped when the stream no longer
exists.
ASTERISK-25356 #close
Change-Id: Ibe6a7cc0927c87326fd5f1c0d4ad889dbfbea1de
Modules commonly used the pj_gethostip function for retrieving the
IP address of the host. This function does not cache the result and may
result in a DNS lookup occurring, or additional work. If the DNS
server is unreachable or network issues arise this can cause the
pj_gethostip function to block for a period of time.
This change adds an ast_sip_get_host_ip and ast_sip_get_host_ip_string
function which does the same thing but caches the host IP address at
module load time. This results in no additional work being done each
time the local host IP address is needed.
ASTERISK-25342 #close
Change-Id: I3205deb679b01fa5ac05a94b623bfd620a2abe1e
* Make ast_rtp_codecs_payload_code() get the current mapping or create a
rx payload type mapping.
ASTERISK-25166
Reported by: Kevin Harwell
ASTERISK-17410
Reported by: Boris Fox
Change-Id: Ia4b2d45877a8f004f6ce3840e3d8afe533384e56
There are numerous problems with the current implementation of the RTP
payload type mapping in Asterisk. It uses only one mapping structure to
associate payload types to codecs. The single mapping is overkill if all
of the payload type values are well known values. Dynamic payload type
mappings do not work as well with the single mapping because RFC3264
allows each side of the link to negotiate different dynamic mappings for
what they want to receive. Not only could you have the same codec mapped
for sending and receiving on different payload types you could wind up
with the same payload type mapped to different codecs for each direction.
1) An independent payload type mapping is needed for sending and
receiving.
2) The receive mapping needs to keep track of previous mappings because of
the slack to when negotiation happens and current packets in flight using
the old mapping arrive.
3) The transmit mapping only needs to keep track of the current negotiated
values since we are sending the packets and know when the switchover takes
place.
* Needed to create ast_rtp_codecs_payload_code_tx() and make some callers
use the new function because ast_rtp_codecs_payload_code() was used for
mappings in both directions.
* Needed to create ast_rtp_codecs_payloads_xover() for cases where we need
to pass preferred codec mappings to the peer channel for early media
bridging or when we need to prefer the offered mapping that RFC3264 says
we SHOULD use.
* ast_rtp_codecs_payloads_xover() and ast_rtp_codecs_payload_code_tx() are
the only new public functions created. All the others were only used for
the tx or rx mapping direction so the function doxygen now reflects which
direction the function operates.
* chan_mgcp.c: Removed call to ast_rtp_codecs_payloads_clear() as doing
that makes no sense when processing an incoming SDP. We would be wiping
out any mappings that we set for the possible outgoing SDP we sent
earlier.
ASTERISK-25166
Reported by: Kevin Harwell
ASTERISK-17410
Reported by: Boris Fox
Change-Id: Iaf6c227bca68cb7c414cf2fd4108a8ac98bd45ac
Some codecs that may be a third party library to Asterisk need to have
knowledge of the format attributes that were negotiated. Unfortunately,
when the great format migration of Asterisk 13 occurred, that ability
was lost.
This patch adds an API call, ast_format_attribute_get, to the core
format API, along with updates to the unit test to check the new API
call. A new callback is also now available for format attribute modules,
such that they can provide the format attribute values they manage.
Note that the API returns a void *. This is done as the format attribute
modules themselves may store format attributes in any particular manner
they like. Care should be taken by consumers of the API to check the
return value before casting and dereferencing. Consumers will obviously
need to have a priori knowledge of the type of the format attribute as
well.
Change-Id: Ieec76883dfb46ecd7aff3dc81a52c81f4dc1b9e3
clock_gettime() is, unfortunately, not portable. But I did like that
over our usual `ts.tv_nsec = tv.tv_usec * 1000` copy/paste code we
usually do when we want a timespec and all we have is ast_tvnow().
This patch adds ast_tsnow(), which mimics ast_tvnow(), but returns a
timespec. If clock_gettime() is available, it will use that. Otherwise
ast_tsnow() falls back to using ast_tvnow().
Change-Id: Ibb1ee67ccf4826b9b76d5a5eb62e90b29b6c456e
An http request can be sent to get the existing Asterisk logs.
The command "curl -v -u user:pass -X GET 'http://localhost:8088
/ari/asterisk/logging'" can be run in the terminal to access the
newly implemented functionality.
* Retrieve all existing log channels
ASTERISK-25252
Change-Id: I7bb08b93e3b938c991f3f56cc5d188654768a808
An http request can be sent to create a log channel
in Asterisk.
The command "curl -v -u user:pass -X POST
'http://localhost:088/ari/asterisk/logging/mylog?
configuration=notice,warning'" can be run in the terminal
to access the newly implemented functionality for ARI.
* Ability to create log channels using ARI
ASTERISK-25252
Change-Id: I9a20e5c75716dfbb6b62fd3474faf55be20bd782
An http request can be sent to delete a log channel
in Asterisk.
The command "curl -v -u user:pass -X DELETE 'http://localhost:8088
/ari/asterisk/logging/mylog'" can be run in the terminal
to access the newly implemented functionally for ARI.
* Able to delete log channels using ARI
ASTERISK-25252
Change-Id: Id6eeb54ebcc511595f0418d586ff55914bc3aae6
An http request can be sent to rotate a specified log channel.
If the channel does not exist, an error response will be
returned.
The command "curl -v -u user:pass -X PUT 'http://localhost:8088
/ari/asterisk/logging/logChannelName/rotate'" can be run in the
terminal to access this new functionality.
* Added the ability to rotate log files through ARI
ASTERISK-25252
Change-Id: Iaefa21cbbc1b29effb33004ee3d89c977e76ab01
Prior to ASTERISK-24988, the WebSocket handshake was resolved before Stasis
applications were registered. This was done such that the WebSocket would be
ready when an application is registered. However, by creating the WebSocket
first, the client had the ability to make requests for the Stasis application
it thought had been created with the initial handshake request. The inevitable
conclusion of this scenario was the cart being put before the horse.
ASTERISK-24988 resolved half of the problem by ensuring that the applications
were created and registered with Stasis prior to completing the handshake
with the client. While this meant that Stasis was ready when the client
received the green-light from Asterisk, it also meant that the WebSocket was
not yet ready for Stasis to dispatch messages.
This patch introduces a message queuing mechanism for delaying messages from
Stasis applications while the WebSocket is being constructed. When the ARI
event processor receives the message from the WebSocket that it is being
created, the event processor instantiates an event session which contains a
message queue. It then tries to create and register the requested applications
with Stasis. Messages that are dispatched from Stasis between this point and
the point at which the event processor is notified the WebSocket is ready, are
stashed in the queue. Once the WebSocket has been built, the queue's messages
are dispatched in the order in which they were originally received and the
queue is concurrently cleared.
ASTERISK-25181 #close
Reported By: Matt Jordan
Change-Id: Iafef7b85a2e0bf78c114db4c87ffc3d16d671a17
A testsuite test recently failed due to a crash that occurred in the DNS
core. The problem was that the test could not resolve an address, did
not set a result on the DNS query, and then indicated the query was
completed. The DNS core does not handle the case of a query with no
result gracefully, and so there is a crash.
This changeset makes the DNS system resolver set a result with a
zero-length answer in the case that a DNS resolution failure occurs
early. The DNS core now also will accept such a response without
treating it as invalid input. A unit test was updated to no longer treat
setting a zero-length response as off-nominal.
Change-Id: Ie56641e22debdaa61459e1c9a042e23b78affbf6
This will add ECDH support to Asterisk. It will
detect auto ECDH support in OpenSSL
(1.0.2b and above) during ./configure. If this is
available, it will use it,
otherwise it will fall back to prime256v1 (this
behavior is consistent with
other projects such as Apache and nginx).
This fixes WebRTC being broken in Firefox 38+ due
to Firefox now only supporting
ciphers with perfect forward secrecy.
ASTERISK-25265 #close
Change-Id: I8c13b33a2a79c0bde2e69e4ba6afa5ab9351465b
This change adds support for the 'rtp_timeout' and 'rtp_timeout_hold'
endpoint options. These allow the channel to be hung up if RTP
is not received from the remote endpoint for a specified number of
seconds.
ASTERISK-25259 #close
Change-Id: I3f39daaa7da2596b5022737b77799d16204175b9