Adds ability for CHANNEL() dialplan function, when used on DAHDI channels,
to temporarily change the number of buffers and/or the buffer policy, and also
to enable, disable, or switch the echo canceller between FAX/data and voice
modes.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@191411 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This branch adds additional methods to dialplan functions, whereby the result
buffers are now dynamic buffers, which can be expanded to the size of any
result. No longer are variable substitutions limited to 4095 bytes of data.
In addition, the common case of needing buffers much smaller than that will
enable substitution to only take up the amount of memory actually needed.
The existing variable substitution routines are still available, but users
of those API calls should transition to using the dynamic-buffer APIs.
Reviewboard: http://reviewboard.digium.com/r/174/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@191140 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r190721 | kpfleming | 2009-04-27 14:29:46 -0500 (Mon, 27 Apr 2009) | 7 lines
Fix 'inconsistent line endings' when autoconf 2.63 is used
Attempt to make configure script regeneration 'safe' using autoconf 2.63, which embeds a bare CR into the script, thus making Subversion complain about inconsistent line endings
This commit changes the MIME type of the configure script to be 'binary' thus making Subversion no longer inspect line endings, and as a bonus 'svn diff' will no longer try to generate diff output for it, which is not generally useful anyway.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@190725 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r189601 | dbailey | 2009-04-21 09:00:55 -0500 (Tue, 21 Apr 2009) | 3 lines
Add check in configure script to check for GLOB_NOMAGIC and GLOB_BRACE in glob.h
This allows config.c to compile when linked against uclibc that does not support these parameters
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@189629 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This is the companion commit to libpri r732. Service messages are now supported
for switch types 4ess/5ess. A new option service_message_support has been added
to chan_dahdi.conf and is noted in the sample config file. The service message
support is turned off by default. The current implementation relies on AstDB
to keep track of channel state, which allows the statuses to be preserved
across Asterisk restarts. Below is a description of the storage format.
The state and reason for the service state are in the form <state>:<reason>,
where:
<state> ::= { 'O' } // 'O' – Out Of Service
<reason> ::= { '0' | '1' | '2' | '3' }, where:
'0' – No reason (backwards compatibility)
'1' – NEAR END
'2' – FAR END
'3' – both NEAR and FAR END
The new CLI commands to handle channel service state are:
pri service disable channel <chan>
pri service enable channel <chan>
Many people contributed to the development of this functionality. Because I
entered at the very end I do not know the exact history. Special thanks to
all who moved the bug forward one way or another:
cmaj, PCadach, markster, mattf, drmac, MikeJ, serge-v, murf, kanelbullar, Seb7,
tilghman, lmadsen, and especially dhubbard (he answered lots of my questions
and did a large portion of the work)
(closes issue #3450)
Reported by: cmaj
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@188342 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r182810 | russell | 2009-03-17 21:09:13 -0500 (Tue, 17 Mar 2009) | 44 lines
Fix cases where the internal poll() was not being used when it needed to be.
We have seen a number of problems caused by poll() not working properly on
Mac OSX. If you search around, you'll find a number of references to using
select() instead of poll() to work around these issues. In Asterisk, we've
had poll.c which implements poll() using select() internally. However, we
were still getting reports of problems.
vadim investigated a bit and realized that at least on his system, even
though we were compiling in poll.o, the system poll() was still being used.
So, the primary purpose of this patch is to ensure that we're using the
internal poll() when we want it to be used.
The changes are:
1) Remove logic for when internal poll should be used from the Makefile.
Instead, put it in the configure script. The logic in the configure
script is the same as it was in the Makefile. Ideally, we would have
a functionality test for the problem, but that's not actually possible,
since we would have to be able to run an application on the _target_
system to test poll() behavior.
2) Always include poll.o in the build, but it will be empty if AST_POLL_COMPAT
is not defined.
3) Change uses of poll() throughout the source tree to ast_poll(). I feel
that it is good practice to give the API call a new name when we are
changing its behavior and not using the system version directly in all cases.
So, normally, ast_poll() is just redefined to poll(). On systems where
AST_POLL_COMPAT is defined, ast_poll() is redefined to ast_internal_poll().
4) Change poll() in main/poll.c to be ast_internal_poll().
It's worth noting that any code that still uses poll() directly will work fine
(if they worked fine before). So, for example, out of tree modules that are
using poll() will not stop working or anything. However, for modules to work
properly on Mac OSX, ast_poll() needs to be used.
(closes issue #13404)
Reported by: agalbraith
Tested by: russell, vadim
http://reviewboard.digium.com/r/198/
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@182847 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Chan_h323 can now be compiled against both the previously supported versions of
OpenH323 as well as the current H.323 Plus (version 1.20.2). The configure
script has been modified to look in the default install location of h323 to
hopefully help avoid using the environment variables OPENH323DIR and PWLIBDIR.
Also, the CLI command "h323 show version" has been added which indicates which
version of h323 is in use.
(closes issue #11261)
Reported by: vhatz
Patches:
asterisk-1.6.0.6-h323plus.patch uploaded by jthurman (license 614)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@182722 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This commit introduces official support for R2 signaling in chan_dahdi. The
modifications to chan_dahdi, and the supporting library, LibOpenR2, were both
written by Moises Silva.
Many users are using this code, or a variant of it, in Asterisk 1.2, 1.4 and 1.6
in Brazil, México and Argentina. An unknown number of users (but at least 1)
are using it in each of the following countries: Colombia, Nepal, Thailand,
Venezuela, Perú, and probably others.
To use this code, LibOpenR2 must be installed from http://www.libopenr2.org/.
Information about configuration can be found in configs/chan_dahdi.conf.sample.
The code committed is the most up to date version, which was being maintained
in svn/asterisk/team/moy/mfcr2/.
I would also like to include a Thank You to the many others that tested this
code beyond those listed in this commit message. These are the names that I
could find in the mantis issue.
(closes issue #12509)
Reported by: moy
Patches:
chan_zap-mfr2.patch uploaded by moy (license 222)
Tested by: moy, korihor, viniciusfontes, Skarmeth, loloski, asbestoshead, titogarrido, heliocoelhojr, konsultex, ncorrare, ecarruda, rtorresduque, PTorres, ychen
Review: http://reviewboard.digium.com/r/40/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@182355 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Several changes in PTLib have occurred requiring build time detection. Changes
accounted for include the library name change, config option change, install
location change, and a boolean type change which is handled by ast_ptlib.h.
Also, the sed check has been modified to properly work with autoconf >= 2.62.
(closes issue #14224)
Reported by: bergolth
Patches:
asterisk-autoconf-sed.patch uploaded by bergolth (license 661)
asterisk-pwlib-v3.patch uploaded by bergolth (license 661)
Tested by: jpeeler
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@177162 65c4cc65-6c06-0410-ace0-fbb531ad65f3
2. Use curl to download sound files, as curl is installed natively on OS X,
whereas wget and fetch are not.
(closes issue #14332)
Reported by: oej
Tested by: Corydon76
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@173130 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r172438 | tilghman | 2009-01-29 16:54:29 -0600 (Thu, 29 Jan 2009) | 9 lines
Lose the CAP_NET_ADMIN at every fork, instead of at startup. Otherwise, if
Asterisk runs as a non-root user and the administrator does a 'restart now',
Asterisk loses the ability to set QOS on packets.
(closes issue #14004)
Reported by: nemo
Patches:
20090105__bug14004.diff.txt uploaded by Corydon76 (license 14)
Tested by: Corydon76
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@172441 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Based on cli_permissions.conf configuration file, we are able to permit or deny
cli commands based on some patterns and the local user and group running rasterisk.
(Sorry if I missed some of the testers).
Reviewboard: http://reviewboard.digium.com/r/11/
(closes issue #11123)
Reported by: eliel
Tested by: eliel, IgorG, Laureano, otherwiseguy, mvanbaak
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@160062 65c4cc65-6c06-0410-ace0-fbb531ad65f3
------------------------------------------------------------------------
r159808 | kpfleming | 2008-11-29 10:58:29 -0600 (Sat, 29 Nov 2008) | 7 lines
update dev-mode compiler flags to match the ones used by default on Ubuntu Intrepid, so all developers will see the same warnings and errors
since this branch already had some printf format attributes, enable checking for them and tag functions that didn't have them
format attributes in a consistent way
------------------------------------------------------------------------
in addition:
move some format attributes from main/utils.c to the header files they belong in, and fix up references to the relevant functions based on new compiler warnings
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@159818 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This provides a new timing interface. In order to use it,
you must be running a Linux with a kernel version of
2.6.25 or newer and glibc 2.8 or newer.
This timing interface is a good alternative if a timing
source is necessary (e.g. for IAX trunking) but DAHDI is
otherwise unnecessary for the system.
For now, this commit contains the actual work done in the
res_timing_timerfd branch. There are no notices in the README
or CHANGES files yet, but they will be added in my next commit.
The timing API of Asterisk also needs to have a bit of work done
with regards to choosing which timing interface to use. This commit
makes the choice a build-time decision, by only allowing one of
the timer interfaces to be chosen in menuselect. It would be preferable
if the choice could be made at run-time, however. The preferred timing
interface could be loaded and tested, and if it does not work, choice
number two may be used instead. That sort of thing. That is beyond
the scope of work in this branch though.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@157820 65c4cc65-6c06-0410-ace0-fbb531ad65f3
along the way, change tags used in configure script, menuselect-deps and code for various dependencies to be consistently named
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@154151 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This commit introduces the first phase of an effort to manage documentation of the
interfaces in Asterisk in an XML format. Currently, a new format is available for
applications and dialplan functions. A good number of conversions to the new format
are also included.
For more information, see the following message to asterisk-dev:
http://lists.digium.com/pipermail/asterisk-dev/2008-October/034968.html
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@153365 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r151240 | kpfleming | 2008-10-20 07:45:56 +0300 (Mon, 20 Oct 2008) | 3 lines
break up acinclude.m4 into individual files, which will make it easier to maintain, easier to add new macros (less patching) and will ease maintenance of these macros across Asterisk branches
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@151242 65c4cc65-6c06-0410-ace0-fbb531ad65f3
both /usr/lib and /usr/lib64 since some distros
place 64-bit libraries only in the /usr/lib64
directory.
(closes issue #13721)
Reported by: jcollie
Patches:
0007-Look-in-64bit-dirs-for-openais.patch uploaded by jcollie (license 412)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@150210 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Reported by: nickpeirson
Patches:
pbx.c.patch uploaded by nickpeirson (license 579)
replace_bzero+bcopy.patch uploaded by nickpeirson (license 579)
Tested by: nickpeirson, murf
1. replaced all refs to bzero and bcopy to memset and memmove instead.
2. added a note to the CODING-GUIDELINES
3. add two macros to asterisk.h to prevent bzero, bcopy from creeping
back into the source
4. removed bzero from configure, configure.ac, autoconfig.h.in
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@147807 65c4cc65-6c06-0410-ace0-fbb531ad65f3