There was no context info in this module's log messages so it was
impossible to toubleshoot.
Added endpoint or host to all messages and added the realms in the
challenge for the "No auth credentials for any realm" message.
Change-Id: Ifeed2786f35fbea7d141237ae15625e472acff9b
RFC 5576 defines how SSRC-level attributes may be added to SDP media
descriptions. In general, this is useful for grouping related SSRCes,
indicating SSRC-level format attributes, and resolving collisions in RTP
SSRC values. These attributes are used widely by browsers during WebRTC
communications, including attributes defined by documents outside of RFC
5576.
This commit introduces the addition of SSRC-level attributes into SDPs
generated by Asterisk. Since Asterisk does not tend to use multiple
SSRCs on a media stream, the initial support is minimal. Asterisk
includes an SSRC-level CNAME attribute if configured to do so. This at
least gives browsers (and possibly others) the ability to resolve SSRC
collisions at offer-answer time.
In order to facilitate this, the RTP engine API has been enhanced to be
able to retrieve the SSRC and CNAME on a given RTP instance.
res_rtp_asterisk currently does not provide meaningful CNAME values in
its RTCP SDES items, and therefore it currently will always return an
empty string as the CNAME value. A task in the near future will result
in res_rtp_asterisk generating more meaningful CNAMEs.
Change-Id: I29e7f23e7db77524f82a3b6e8531b1195ff57789
If you use ast_request to create a PJSIP channel but then hang it
up without causing a transaction to be sent, the session will
never be destroyed. This is due ot the fact that it's pjproject
that triggers the session cleanup when the transaction ends.
app_chanisavail was doing this to get more granular channel state
and it's also possible for this to happen via ARI.
* ast_sip_session_terminate was modified to explicitly call the
cleanup tasks and unreference session if the invite state is NULL
AND invite_tsx is NULL (meaning we never sent a transaction).
* chan_pjsip/hangup was modified to bump session before it calls
ast_sip_session_terminate to insure that session stays valid
while it does its own cleanup.
* Added test events to session_destructor for a future testsuite
test.
ASTERISK-26908 #close
Reported-by: Richard Mudgett
Change-Id: I52daf6f757184e5544c261f64f6fe9602c4680a9
It's possible for a name in a party id structure to be marked as valid, but the
name string itself be NULL (for instance this is possible to do by using the
dialplan CALLERID function). There were a couple of places where the name was
validated, but the string itself was not checked before passing it to functions
like 'strlen'. This of course caused a crashed.
This patch adds in a NULL check before attempting to pass it into a function
that is not NULL tolerant.
ASTERISK-25823 #close
Change-Id: Iaa6ffe9d92f598fe9e3c8ae373fadbe3dfbf1d4a
* Initialize hepv3_runtime_data.sockfd to -1 so that our ao2 destructor
does not close fd 0
* Add logging output when the required option - capture_address - is not
specified.
* Remove a no longer relevant #define and correct related documentation
* Pass appropriate flags to aco_option_register so that capture_address
cannot be the empty string.
ASTERISK-26953 #close
Change-Id: Ief08441bc6596d6f1718fa810e54a5048124f076
If ICE is enabled and a STUN server does not respond then we will block
until we give up on the STUN response. This will take nine seconds. In
the mean time the peer that sent the INVITE will send retransmissions.
* Restructure res_pjsip_session.c:new_invite() to send a 100 Trying out
earlier to prevent these retransmissions.
ASTERISK-26890
Change-Id: Ie3fc611e53a0eff6586ad55e4aacad81cf6319a8
* Restructure ast_sip_session_alloc() to need less cleanup on off nominal
error paths.
* Made ast_sip_session_alloc() and ast_sip_session_create_outgoing() avoid
unnecessary ref manipulation to return a session. This is faster than
calling a function. That function may do logging of the ref changes with
REF_DEBUG enabled.
Change-Id: I2a0affc4be51013d3f0485782c96b8fee3ddb00a
Occasionally a crash happens when processing the RTCP DTLS timeout
handler. The RTCP DTLS timeout timer could be left running if we have not
completed the DTLS handshake before we place the call on hold or we
attempt direct media.
* Made ast_rtp_prop_set() stop the RTCP DTLS timer when disabling RTCP.
* Made some sanity tweaks to ast_rtp_prop_set() when switching from
standard RTCP mode to RTCP multiplexed mode.
ASTERISK-26692 #close
Change-Id: If6c64c79129961acfa4b3d63a864e8f6b664acc0
The struct ast_rtp_instance has historically been indirectly protected
from reentrancy issues by the channel lock because early channel drivers
held the lock for really long times. Holding the channel lock for such a
long time has caused many deadlock problems in the past. Along comes
chan_pjsip/res_pjsip which doesn't necessarily hold the channel lock
because sometimes there may not be an associated channel created yet or
the channel pointer isn't available.
In the case of ASTERISK-26835 a pjsip serializer thread was processing a
message's SDP body while another thread was reading a RTP packet from the
socket. Both threads wound up changing the rtp->rtcp->local_addr_str
string and interfering with each other. The classic reentrancy problem
resulted in a crash.
In the case of ASTERISK-26853 a pjsip serializer thread was processing a
message's SDP body while another thread was reading a RTP packet from the
socket. Both threads wound up processing ICE candidates in PJPROJECT and
interfering with each other. The classic reentrancy problem resulted in a
crash.
* rtp_engine.c: Make the ast_rtp_instance_xxx() calls lock the RTP
instance struct.
* rtp_engine.c: Make ICE and DTLS wrapper functions to lock the RTP
instance struct for the API call.
* res_rtp_asterisk.c: Lock the RTP instance to prevent a reentrancy
problem with rtp->rtcp->local_addr_str in the scheduler thread running
ast_rtcp_write().
* res_rtp_asterisk.c: Avoid deadlock when local RTP bridging in
bridge_p2p_rtp_write() because there are two RTP instance structs
involved.
* res_rtp_asterisk.c: Avoid deadlock when trying to stop scheduler
callbacks. We cannot hold the instance lock when trying to stop a
scheduler callback.
* res_rtp_asterisk.c: Remove the lock in struct dtls_details and use the
struct ast_rtp_instance ao2 object lock instead. The lock was used to
synchronize two threads to prevent a race condition between starting and
stopping a timeout timer. The race condition is no longer present between
dtls_perform_handshake() and __rtp_recvfrom() because the instance lock
prevents these functions from overlapping each other with regards to the
timeout timer.
* res_rtp_asterisk.c: Remove the lock in struct ast_rtp and use the struct
ast_rtp_instance ao2 object lock instead. The lock was used to
synchronize two threads using a condition signal to know when TURN
negotiations complete.
* res_rtp_asterisk.c: Avoid deadlock when trying to stop the TURN
ioqueue_worker_thread(). We cannot hold the instance lock when trying to
create or shut down the worker thread without a risk of deadlock.
This patch exposed a race condition between a PJSIP serializer thread
setting up an ICE session in ice_create() and another thread reading RTP
packets.
* res_rtp_asterisk.c:ice_create(): Set the new rtp->ice pointer after we
have re-locked the RTP instance to prevent the other thread from trying to
process ICE packets on an incomplete ICE session setup.
A similar race condition is between a PJSIP serializer thread resetting up
an ICE session in ice_create() and the timer_worker_thread() processing
the completion of the previous ICE session.
* res_rtp_asterisk.c:ast_rtp_on_ice_complete(): Protect against an
uninitialized/null remote_address after calling
update_address_with_ice_candidate().
* res_rtp_asterisk.c: Eliminate the chance of ice_reset_session()
destroying and setting the rtp->ice pointer to NULL while other threads
are using it by adding an ao2 wrapper around the PJPROJECT ice pointer.
Now when we have to unlock the RTP instance object to call a PJPROJECT ICE
function we will hold a ref to the wrapper. Also added some rtp->ice NULL
checks after we relock the RTP instance and have to do something with the
ICE structure.
ASTERISK-26835 #close
ASTERISK-26853 #close
Change-Id: I780b39ec935dcefcce880d50c1a7261744f1d1b4
The periodic doc job does a make ari-stubs and checks that
there are no changes before generating the docs. Since I changed
the mustache template (and the generated code directly) recently
and forgot to regenerate the stubs, the doc job thinks they're out
of date.
Change-Id: I94b97035311eccf52b0101b8590223265a7881d4
res_stun_monitor will fail to load if DNS resolution of the STUN server
fails. Instead, we continue without the STUN server being resolved and
we will re-attempt the resolution on the STUN refresh interval.
ASTERISK-21856 #close
Reported by: Jeremy Kister
Change-Id: I6334c54a1cc798f8a836b4b47948e0bb4ef59254
This saves around 100 bytes when G.711, G.722, G.729, and GSM are advertised in
SDP. This reduces the chance to hit the MTU bearer of 1300 bytes for SIP over
UDP, if many codecs are allowed in Asterisk. This new feature is enabled
together with the optional feature compact_headers=yes via the file pjsip.conf.
ASTERISK-26932 #close
Change-Id: Iaa556ab4c8325cd34c334387ab2847fab07b1689
In all non-pbx modules, AST_MODULE_LOAD_FAILURE has been changed
to AST_MODULE_LOAD_DECLINE. This prevents asterisk from exiting
if a module can't be loaded. If the user wishes to retain the
FAILURE behavior for a specific module, they can use the "require"
or "preload-require" keyword in modules.conf.
A new API was added to logger: ast_is_logger_initialized(). This
allows asterisk.c/check_init() to print to the error log once the
logger subsystem is ready instead of just to stdout. If something
does fail before the logger is initialized, we now print to stderr
instead of stdout.
Change-Id: I5f4b50623d9b5a6cb7c5624a8c5c1274c13b2b25
Added the stun_blacklist option to rtp.conf. Some multihomed servers have
IP interfaces that cannot reach the STUN server specified by stunaddr.
Blacklist those interface subnets from trying to send a STUN packet to
find the external IP address. Attempting to send the STUN packet
needlessly delays processing incoming and outgoing SIP INVITEs because we
will wait for a response that can never come until we give up on the
response. Multiple subnets may be listed.
ASTERISK-26890 #close
Change-Id: I3ff4f729e787f00c3e6e670fe6435acce38be342
* create_rtp(): Eliminate use of deprecated transport struct member. That
member and several others in the transport structure were deprecated
because of an infinite loop created when using realtime configuration.
See 2451d4e455
ASTERISK-26851
Change-Id: I0533aa13c9ce3c6cc394e0fd2b5bf1cd1b2ef3bc
This change adds database tables for the PUBLISH support so it
can be configured using realtime. A minor fix to the
res_pjsip_publish_asterisk module was done so that it read the
sorcery configuration from the correct section. Finally the
sample configuration files have been updated.
ASTERISK-26928
Change-Id: I81991ae5c75af98d247f7eacd1c0b0a763675952
* create_rtp(): Fix unexpected alteration of global address_rtp if a
transport is bound to an address.
* create_rtp(): Fix use of uninitialized memory if the endpoint RTP media
address is invalid or the transport has an invalid address.
ASTERISK-26851
Change-Id: Icde42e65164a88913cb5c2601b285eebcff397b7
We were leaking a transport ref in multihomed_on_rx_message() which
resulted in the FRACK about excessive ref counts.
ASTERISK-26916 #close
Change-Id: I7a96658a9614a060565bb9ad51cb1c9c11ee145f
It is perfectly acceptable for a BYE to be sent on a disconnected
session. This occurs when we respond to a challenge to the BYE
for authentication credentials.
ASTERISK-26363
Change-Id: I6ef0ddece812fea6665a1dd2549ef44fb9d90045
Two new parameters have been added to the pjsip config wizard.
* Setting 'sends_line_with_registrations' to true will cause the wizard
to skip the creation of an identify object to match incoming request
to the endpoint and instead add the line and endpoint parameters to
the outbound registration object.
* Setting 'outbound_proxy' is a shortcut for adding individual
endpoint/outbound_proxy, aor/outbound_proxy and
registration/outbound_proxy parameters.
Change-Id: I678e5f80765734c056620528a6d40d82736ceeb0
(cherry picked from commit a827892ff7)
(cherry picked from commit 27344675be)
Joshua Colp
Jenkins2
George Joseph
Richard Mudgett
Mark Michelson
Kevin Harwell
Sean Bright
Alexander Traud
zuul
Daniel Journo