* Added handling of received HOLD/RETRIEVE messages and the optional ability
to transfer a held call on disconnect similar to an analog phone.
* Added CallRerouting/CallDeflection support for Q.SIG, ETSI PTP, ETSI PTMP.
Will reroute/deflect an outgoing call when receive the message.
Can use the DAHDISendCallreroutingFacility to send the message for the
supported switches.
* Added ability to send/receive keypad digits in the SETUP message.
Send keypad digits in SETUP message: Dial(DAHDI/g1[/K<keypad_digits>][/extension])
Access any received keypad digits in SETUP message by: ${CHANNEL(keypad_digits)}
* Added support for BRI PTMP NT mode.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@225692 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The Telecom Specs in NZ suggests that SUB ADDRESS is always on, so doing
"desk to desk" between offices each with an asterisk box over the ISDN
should then be possible, without a whole load of DDI numbers required.
(closes issue #15604)
Reported by: alecdavis
Patches:
asterisk_subaddr_trunk.diff11.txt uploaded by alecdavis (license 585)
Some minor modificatons were made.
Tested by: alecdavis, rmudgett
Review: https://reviewboard.asterisk.org/r/405/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@225357 65c4cc65-6c06-0410-ace0-fbb531ad65f3
A recent change to the configure script that allows the user to specify
CFLAGS and/or LDFLAGS to the script had the unfortunate side effect of
letting autoconf's default CFLAGS (-g -O2) feed in to the rest of the build
system, thereby overriding the DONT_OPTIMIZE setting in menuselect. That
problem is now corrected.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@217074 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch makes some small changes to handle watchdog timeouts in a better way,
and also uses a 'cleaner' method of including the spandsp header files.
(closes issue #14769)
Reported by: andrew
Patches:
app_fax-20090406.diff uploaded by andrew (license 240)
v1-14769.patch uploaded by dimas (license 88)
Tested by: freh, deti, caspy, dimas, sgimeno, Dovid
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@210777 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Also go back and wrap all of the places that use the specific reverse charge
APIs with preprocessor conditionals.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@204919 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Someone asked yesterday, "is there a good reason why we can't just put these
modules in Asterisk?". After a brief discussion, as long as the modules are
clearly set aside in their own directory and not enabled by default, it is
perfectly fine.
For more information about why a module goes in addons, see README-addons.txt.
chan_ooh323 does not currently compile as it is behind some trunk API updates.
However, it will not build by default, so it should be okay for now.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@204413 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The original patch for this was written by Brett Bryant, and I split it out into
it's own module.
(closes issue #12876)
Reported by: bbryant
Patches:
06162008_cdr_custom_syslog.diff uploaded by bbryant (license 36)
05212009_cdr_syslog.patch uploaded by seanbright (license 71)
Tested by: seanbright
Review: https://reviewboard.asterisk.org/r/297/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@203846 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Since we use 'static' weakref symbols, and not all GCC versions support them,
test for that combination explicitly.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@201137 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The last changes to ast_gcc_attribute.m4 caused some problems checking for
various attributes, because the scope of the symbol the attribute is applied
to can be important; this patch allows the scope to be specified for the check.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@200985 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The configure script tests for compiler attributes didn't actually enable
enough warnings or provide a proper test harness to determine whether the
compiler supports the attribute in question or not; this caused gcc 4.1 to
report that it supports 'weakref', but it doesn't actually support it in the
way that is needed for our optional API mechanism. The new configure script
test will properly distinguish between full support and partial support
for this attribute, among others.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@200764 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch provides a new implementation of the optional API support defined
in asterisk/optional_api.h; this new version provides solves compatibility
issues with the use of linker version scripts for suppressing global symbols.
In addition, there is now a functional (and tested!) implementation for Mac OS/X,
so module writers no longer need to use special tests before calling optional
API functions. All future implementations must provide these same semantics,
so that module writers can rely on them.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@200519 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This commit add Calendaring support to Asterisk for iCalendar, CalDAV, and MS
Exchange calendars. Exchange support has only been tested on Exchange Server 2k3
and does not support forms-based authentication at this time (patches *very*
welcome). Exchange support is also currently missing the ability to return a
list of a meting's attendees (again, patches are very, very welcome).
Features include:
Querying a calendar for events over a specific time range
Checking a calendar's busy status via the dialplan
Writing calendar events via the dialplan (CalDAV and Exchange only)
Handling calendar event notifications through the dialplan
(closes issue #14771)
Tested by: lmadsen, twilson, Shivaprakash
Review: https://reviewboard.asterisk.org/r/58
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@197738 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Adds ability for CHANNEL() dialplan function, when used on DAHDI channels,
to temporarily change the number of buffers and/or the buffer policy, and also
to enable, disable, or switch the echo canceller between FAX/data and voice
modes.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@191411 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This branch adds additional methods to dialplan functions, whereby the result
buffers are now dynamic buffers, which can be expanded to the size of any
result. No longer are variable substitutions limited to 4095 bytes of data.
In addition, the common case of needing buffers much smaller than that will
enable substitution to only take up the amount of memory actually needed.
The existing variable substitution routines are still available, but users
of those API calls should transition to using the dynamic-buffer APIs.
Reviewboard: http://reviewboard.digium.com/r/174/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@191140 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r190721 | kpfleming | 2009-04-27 14:29:46 -0500 (Mon, 27 Apr 2009) | 7 lines
Fix 'inconsistent line endings' when autoconf 2.63 is used
Attempt to make configure script regeneration 'safe' using autoconf 2.63, which embeds a bare CR into the script, thus making Subversion complain about inconsistent line endings
This commit changes the MIME type of the configure script to be 'binary' thus making Subversion no longer inspect line endings, and as a bonus 'svn diff' will no longer try to generate diff output for it, which is not generally useful anyway.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@190725 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r189601 | dbailey | 2009-04-21 09:00:55 -0500 (Tue, 21 Apr 2009) | 3 lines
Add check in configure script to check for GLOB_NOMAGIC and GLOB_BRACE in glob.h
This allows config.c to compile when linked against uclibc that does not support these parameters
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@189629 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This is the companion commit to libpri r732. Service messages are now supported
for switch types 4ess/5ess. A new option service_message_support has been added
to chan_dahdi.conf and is noted in the sample config file. The service message
support is turned off by default. The current implementation relies on AstDB
to keep track of channel state, which allows the statuses to be preserved
across Asterisk restarts. Below is a description of the storage format.
The state and reason for the service state are in the form <state>:<reason>,
where:
<state> ::= { 'O' } // 'O' – Out Of Service
<reason> ::= { '0' | '1' | '2' | '3' }, where:
'0' – No reason (backwards compatibility)
'1' – NEAR END
'2' – FAR END
'3' – both NEAR and FAR END
The new CLI commands to handle channel service state are:
pri service disable channel <chan>
pri service enable channel <chan>
Many people contributed to the development of this functionality. Because I
entered at the very end I do not know the exact history. Special thanks to
all who moved the bug forward one way or another:
cmaj, PCadach, markster, mattf, drmac, MikeJ, serge-v, murf, kanelbullar, Seb7,
tilghman, lmadsen, and especially dhubbard (he answered lots of my questions
and did a large portion of the work)
(closes issue #3450)
Reported by: cmaj
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@188342 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r182810 | russell | 2009-03-17 21:09:13 -0500 (Tue, 17 Mar 2009) | 44 lines
Fix cases where the internal poll() was not being used when it needed to be.
We have seen a number of problems caused by poll() not working properly on
Mac OSX. If you search around, you'll find a number of references to using
select() instead of poll() to work around these issues. In Asterisk, we've
had poll.c which implements poll() using select() internally. However, we
were still getting reports of problems.
vadim investigated a bit and realized that at least on his system, even
though we were compiling in poll.o, the system poll() was still being used.
So, the primary purpose of this patch is to ensure that we're using the
internal poll() when we want it to be used.
The changes are:
1) Remove logic for when internal poll should be used from the Makefile.
Instead, put it in the configure script. The logic in the configure
script is the same as it was in the Makefile. Ideally, we would have
a functionality test for the problem, but that's not actually possible,
since we would have to be able to run an application on the _target_
system to test poll() behavior.
2) Always include poll.o in the build, but it will be empty if AST_POLL_COMPAT
is not defined.
3) Change uses of poll() throughout the source tree to ast_poll(). I feel
that it is good practice to give the API call a new name when we are
changing its behavior and not using the system version directly in all cases.
So, normally, ast_poll() is just redefined to poll(). On systems where
AST_POLL_COMPAT is defined, ast_poll() is redefined to ast_internal_poll().
4) Change poll() in main/poll.c to be ast_internal_poll().
It's worth noting that any code that still uses poll() directly will work fine
(if they worked fine before). So, for example, out of tree modules that are
using poll() will not stop working or anything. However, for modules to work
properly on Mac OSX, ast_poll() needs to be used.
(closes issue #13404)
Reported by: agalbraith
Tested by: russell, vadim
http://reviewboard.digium.com/r/198/
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@182847 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Chan_h323 can now be compiled against both the previously supported versions of
OpenH323 as well as the current H.323 Plus (version 1.20.2). The configure
script has been modified to look in the default install location of h323 to
hopefully help avoid using the environment variables OPENH323DIR and PWLIBDIR.
Also, the CLI command "h323 show version" has been added which indicates which
version of h323 is in use.
(closes issue #11261)
Reported by: vhatz
Patches:
asterisk-1.6.0.6-h323plus.patch uploaded by jthurman (license 614)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@182722 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This commit introduces official support for R2 signaling in chan_dahdi. The
modifications to chan_dahdi, and the supporting library, LibOpenR2, were both
written by Moises Silva.
Many users are using this code, or a variant of it, in Asterisk 1.2, 1.4 and 1.6
in Brazil, México and Argentina. An unknown number of users (but at least 1)
are using it in each of the following countries: Colombia, Nepal, Thailand,
Venezuela, Perú, and probably others.
To use this code, LibOpenR2 must be installed from http://www.libopenr2.org/.
Information about configuration can be found in configs/chan_dahdi.conf.sample.
The code committed is the most up to date version, which was being maintained
in svn/asterisk/team/moy/mfcr2/.
I would also like to include a Thank You to the many others that tested this
code beyond those listed in this commit message. These are the names that I
could find in the mantis issue.
(closes issue #12509)
Reported by: moy
Patches:
chan_zap-mfr2.patch uploaded by moy (license 222)
Tested by: moy, korihor, viniciusfontes, Skarmeth, loloski, asbestoshead, titogarrido, heliocoelhojr, konsultex, ncorrare, ecarruda, rtorresduque, PTorres, ychen
Review: http://reviewboard.digium.com/r/40/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@182355 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Several changes in PTLib have occurred requiring build time detection. Changes
accounted for include the library name change, config option change, install
location change, and a boolean type change which is handled by ast_ptlib.h.
Also, the sed check has been modified to properly work with autoconf >= 2.62.
(closes issue #14224)
Reported by: bergolth
Patches:
asterisk-autoconf-sed.patch uploaded by bergolth (license 661)
asterisk-pwlib-v3.patch uploaded by bergolth (license 661)
Tested by: jpeeler
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@177162 65c4cc65-6c06-0410-ace0-fbb531ad65f3
2. Use curl to download sound files, as curl is installed natively on OS X,
whereas wget and fetch are not.
(closes issue #14332)
Reported by: oej
Tested by: Corydon76
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@173130 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r172438 | tilghman | 2009-01-29 16:54:29 -0600 (Thu, 29 Jan 2009) | 9 lines
Lose the CAP_NET_ADMIN at every fork, instead of at startup. Otherwise, if
Asterisk runs as a non-root user and the administrator does a 'restart now',
Asterisk loses the ability to set QOS on packets.
(closes issue #14004)
Reported by: nemo
Patches:
20090105__bug14004.diff.txt uploaded by Corydon76 (license 14)
Tested by: Corydon76
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@172441 65c4cc65-6c06-0410-ace0-fbb531ad65f3