The problem came from the fact that a frame read from a format interpreter
was not freed. Adding a call to ast_frfree fixed this. The explanation for
why this caused the problem is a bit complex, but here goes:
There was a problem in all versions of Asterisk where the embedded frame
of a filestream structure was referenced after the filestream was freed. This
was fixed by adding reference counting to the filestream structure. The refcount
would increase every time that a filestream's frame pointer was pointing to an
actual frame of data. When the frame was freed, the refcount would decrease. Once
the refcount reached 0, the filestream was freed, and as part of the operation,
the open files were closed as well.
Thus it becomes more clear why a missing ast_frfree would cause a reference leak
and cause the files to not be closed. You may ask then if there was a frame leak
before this patch. The answer to that is actually no! The filestream code was
"smart" enough to know that since the frame we received came from a format interpreter,
the frame had no malloced data and thus didn't need to be freed. Now, however, there
is cleanup that needs to be done when we finish with the frame, so we do need to
call ast_frfree on the frame to be sure that the refcount for the filestream is
decremented appropriately.
(closes issue #14384)
Reported by: fiddur
Patches:
14384.patch uploaded by putnopvut (license 60)
Tested by: fiddur, putnopvut
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@173354 65c4cc65-6c06-0410-ace0-fbb531ad65f3
A crash was brought up on the bugtracker. The first run through valgrind
was full of legitimate complaints of uninitialized values in func_timeout when
setting a response timeout. These were fixed but the crash persisted.
A second run through showed the real problem. The reference counting used
for filestreams was incorrect because there were some missing increments
when a frame was read from a format module.
(closes issue #14118)
Reported by: blitzrage
Patches:
14118v2.patch uploaded by putnopvut (license 60)
Tested by: blitzrage
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@166267 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Reported by: snyfer
This handles the case for a zero length file to attempt to be streamed. Instead of failing from not playing any data, go ahead and return success as ast_streamfile should consider playing nothing a success when there is nothing to play.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@158062 65c4cc65-6c06-0410-ace0-fbb531ad65f3
- Convert chan_iax2 to use the timing API
- Convert usage of timing in the core to use the timing API instead of
using DAHDI directly
- Make a change to the timing API to add the set_rate() function
- change the timing core to use a rwlock
- merge a timing implementation, res_timing_dahdi
Basic testing was successful using res_timing_dahdi
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@122523 65c4cc65-6c06-0410-ace0-fbb531ad65f3
- make data member of the ast_frame struct a named union instead of a void
Recently the ast_queue_hangup function got a new parameter, the hangupcause
Feedback came in that this is no good and that instead a new function should be created.
This I did.
The hangupcause was stored in the seqno member of the ast_frame struct. This is not very
elegant, and since there's already a data member that one should be used.
Problem is, this member was a void *.
Now it's a named union so it can hold a pointer, an uint32 and there's a padding in case someone
wants to store another type in there in the future.
This commit is so massive, because all ast_frame.data uses have to be
altered to ast_frame.data.data
Thanks russellb and kpfleming for the feedback.
(closes issue #12674)
Reported by: mvanbaak
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@117802 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r114035 | qwell | 2008-04-10 12:26:10 -0500 (Thu, 10 Apr 2008) | 10 lines
Only try to prefix language if we are not using an absolute path (suffix it otherwise).
en/var/lib/asterisk/sounds/blah.gsm is a very silly path.
(closes issue #12379)
Reported by: kuj
Patches:
12379-absolutepath.diff uploaded by qwell (license 4)
Tested by: kuj, qwell
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@114036 65c4cc65-6c06-0410-ace0-fbb531ad65f3
other than 8 kHz. The issue here is that format modules give a "whennext" sample
value, which is used to calculate when to set a timer for to retrieve the next
frame. However, the zaptel timer operates on 8 kHz samples, so this must be taken
into account.
(another part of issue #12164, reported by milazzo and jsmith, patch by me)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@110303 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Fix a number of other places where the number of samples in a G722 frame was
not properly handled because of various reasons.
main/rtp.c:
- When a G722 frame is read from the smoother, the number of samples in the
frame must be divided by 2 before being sent out over the network. Even
though G722 is 16 kHz, an error in some previous spec has made it so that
we have to list the number of samples such as if it was 8 kHz.
main/file.c:
- When scheduling the next time to expect a frame, take into account that the
format of the file we're reading from may not be 8 kHz.
codecs/codec_g722.c:
- When converting from G722 to slinear, g722_decode() expects its samples
parameter to be in the silly (real samples / 2) format. Make it so.
- When converting from slinear to G722, properly set the number of samples in
the frame to be the number of bytes of output * 2.
formats/format_pcm.c:
- This format module handles G722, among a number of other formats. However,
the read() and seek() functions did not account for the fact that G722 has
2 samples per byte.
(closes issue #12130, reported by rickross, patched by me)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@106501 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r104593 | kpfleming | 2008-02-27 10:53:06 -0600 (Wed, 27 Feb 2008) | 8 lines
fallback to standard English prompts properly when using new prompt directory layout
(closes issue #11831)
Reported by: IgorG
Patches:
fallbacken.v1.diff uploaded by IgorG (license 20) (modified by me to improve code and conform rest of function to coding guidelines)
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@104594 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r101601 | russell | 2008-01-31 17:10:06 -0600 (Thu, 31 Jan 2008) | 12 lines
Fix a couple of places where ast_frfree() was not called on a frame that came
from a translator. This showed itself by g729 decoders not getting released.
Since the flag inside the translator frame never got unset by freeing the frame
to indicate it was no longer in use, the translators never got destroyed, and
thus the g729 licenses were not released.
(closes issue #11892)
Reported by: xrg
Patches:
11892.diff uploaded by russell (license 2)
Tested by: xrg, russell
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@101611 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r100465 | tilghman | 2008-01-27 15:59:53 -0600 (Sun, 27 Jan 2008) | 11 lines
When deleting a task from the scheduler, ignoring the return value could
possibly cause memory to be accessed after it is freed, which causes all
sorts of random memory corruption. Instead, if a deletion fails, wait a
bit and try again (noting that another thread could change our taskid
value).
(closes issue #11386)
Reported by: flujan
Patches:
20080124__bug11386.diff.txt uploaded by Corydon76 (license 14)
Tested by: Corydon76, flujan, stuarth`
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@100488 65c4cc65-6c06-0410-ace0-fbb531ad65f3
build times - tested, there is no measureable difference before and
after this commit.
In this change:
use asterisk/compat.h to include a small set of system headers:
inttypes.h, unistd.h, stddef.h, stddint.h, sys/types.h, stdarg.h,
stdlib.h, alloca.h, stdio.h
Where available, the inclusion is conditional on HAVE_FOO_H as determined
by autoconf.
Normally, source files should not include any of the above system headers,
and instead use either "asterisk.h" or "asterisk/compat.h" which does it
better.
For the time being I have left alone second-level directories
(main/db1-ast, etc.).
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@89333 65c4cc65-6c06-0410-ace0-fbb531ad65f3
- the *_CURRENT macros no longer need the list head pointer argument
- add AST_LIST_MOVE_CURRENT to encapsulate the remove/add operation when moving entries between lists
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@89106 65c4cc65-6c06-0410-ace0-fbb531ad65f3
- Remove the AST_FORMAT_MAX_* types, as these are consuming 3 out of our available 32 bits.
- Add a native slin16 type, so that 16kHz codecs can translate without losing resolution.
(This doesn't affect anything immediately, until another codec has wb support.)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@89071 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r83432 | russell | 2007-09-21 09:37:20 -0500 (Fri, 21 Sep 2007) | 4 lines
gcc 4.2 has a new set of warnings dealing with cosnt pointers. This set of
changes gets all of Asterisk (minus chan_alsa for now) to compile with gcc 4.2.
(closes issue #10774, patch from qwell)
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@83433 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Russell Bryant
Joshua Colp
Mark Michelson
Eliel C. Sardanons
Matthew Nicholson
Jeff Peeler
Kevin P. Fleming
Tilghman Lesher
Sean Bright
Michiel van Baak
Jason Parker
Luigi Rizzo