The type of tv_usec is suseconds_t. On Linux, this is usually a long int, but
the specification is actually pretty lax on what it might actually be. And,
sadly, there's no printf/scanf width specifier for suseconds_t. So it could
bit an int or a long, but there's not a great way to tell which it is.
This patch fixes scanf by reading into a long temporary variable that's then
stored into the tv_usec. It fixes printf by casting the tv_usec to a long
first.
This patch also adds some missing width specifiers for some debug statements,
which would cause ".000001" to be displayed at ".1".
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@392076 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When a channel is originated, its application is typically set to AppDial2,
indicating that it was a dialed channel through the Dial API. Asterisk during
an originate will perform a stack execute to direct the outgoing channel to
a particular place in the dialplan or application. When the stack returns, the
previous application (AppDial2) is restored.
Unfortunately, in the case of an originated channel, the stack restore happens
after hangup. A stasis message is sent notifying everyone that the application
was restored, and this causes a NewExten event to go out after the Hangup event,
violating the basic contract consumers have of the channel lifetime. While we
could preclude the message from going out, restoring the channel's state before
it executed the next higher frame in the stack has to occur, and other places
in the code depend on this behavior.
Since we know that channel hung up (it's a ZOMBIE!), this patch simply checks
to see if the channel has been zombified before sending a NewExten event.
Note that this will fix a number of bouncing tests in the Test Suite. Go tests.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@392005 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch is the initial push to update Asterisk's CDR engine for the new
bridging framework. This patch guts the existing CDR engine and builds the new
on top of messages coming across Stasis. As changes in channel state and bridge
state are detected, CDRs are built and dispatched accordingly. This
fundamentally changes CDRs in a few ways.
(1) CDRs are now *very* reflective of the actual state of channels and bridges.
This means CDRs track well with what an actual channel is doing - which
is useful in transfer scenarios (which were previously difficult to pin
down). It does, however, mean that CDRs cannot be 'fooled'. Previous
behavior in Asterisk allowed for CDR applications, channels, and other
properties to be spoofed in parts of the code - this no longer works.
(2) CDRs have defined behavior in multi-party scenarios. This behavior will not
be what everyone wants, but it is a defined behavior and as such, it is
predictable.
(3) The CDR manipulation functions and applications have been overhauled. Major
changes have been made to ResetCDR and ForkCDR in particular. Many of the
options for these two applications no longer made any sense with the new
framework and the (slightly) more immutable nature of CDRs.
There are a plethora of other changes. For a full description of CDR behavior,
see the CDR specification on the Asterisk wiki.
(closes issue ASTERISK-21196)
Review: https://reviewboard.asterisk.org/r/2486/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@391947 65c4cc65-6c06-0410-ace0-fbb531ad65f3
In revision 389733, mwi state allocation was placed into its
own function instead of performing the allocation in-line when
required. The issue was that in ast_publish_mwi_state_full(),
the local variable "uniqueid" was no longer being set, but it was
still being used as the topic for MWI. This meant that all MWI
publications ended up being published to the "" (empty string)
mailbox topic. Thus MWI subscriptions for specific mailboxes were
never notified of mailbox state changes.
This change fixes the issue by removing the local uniqueid variable
from ast_publish_mwi_state_full() and instead referencing the
mwi_state->uniqueid field since it has been properly set.
(closes issue ASTERISK-21913)
Reported by Malcolm Davenport
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@391921 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Properly search for bridge association structures so that they are
found when expected and handle cases where they don't exist.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@391777 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Bridge snapshot events were missing some important transitions that
were noticed in subsequent snapshots. Snapshots will now be published
on all bridge reconfigurations.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@391776 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The options should not be registered multiple times. Instead, the configuration just needs
to be reprocessed by the config framework. This also exposed that we were not properly telling
the config framework to treat the configuration processing with the "reload" semantics when
a reload occurred. Both of these errors are fixed now.
Thanks to Richard Mudgett for discovering the leak.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@391676 65c4cc65-6c06-0410-ace0-fbb531ad65f3
While very handy, this macro didn't occur until a later version of libjansson.
We'd prefer to be compatible with older versions still - as such, iteration
over key/value pairs in a JSON object have to be done with a little bit more
manual work.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@391675 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This pulls bridge-related CEL event triggers out of the code in which
they were residing and pulls them into cel.c where they are now
triggered by changes in bridge snapshots. To get access to the
Stasis-Core parking topic in cel.c, the Stasis-Core portions of parking
init have been pulled into core Asterisk init.
This also adds a new CEL event (AST_CEL_BRIDGE_TO_CONF) that indicates
a two-party bridge has transitioned to a multi-party conference. The
reverse cannot occur in CEL terms even though it may occur in actuality
and two party bridges which receive a AST_CEL_BRIDGE_TO_CONF will be
treated as multi-party conferences for the duration of the bridge.
Review: https://reviewboard.asterisk.org/r/2563/
(closes issue ASTERISK-21564)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@391643 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This uses the channel state change events from Stasis-Core to determine
when channel-related CEL events should be raised. Those refactored in
this patch are:
* AST_CEL_CHANNEL_START
* AST_CEL_ANSWER
* AST_CEL_APP_START
* AST_CEL_APP_END
* AST_CEL_HANGUP
* AST_CEL_CHANNEL_END
Retirement of Linked IDs is also refactored.
CEL configuration has been refactored to use the config framework.
Note: Some HANGUP events are not generated correctly because the bridge
layer does not propagate hangupcause/hangupsource information yet.
Review: https://reviewboard.asterisk.org/r/2544/
(closes issue ASTERISK-21563)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@391622 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch fixes three memory leaks
* When we load a module with the LOAD_PRIORITY flag, we remove its entry from
the load order list. Unfortunately, we don't free the memory associated with
entry in the list. This patch corrects that and properly frees the memory
for the module in the list.
* When adding a custom format (such as SILK or CELT), the routine for adding
the format was leaking a reference. RAII_VAR cleans this up properly.
* We now de-ref the channel_snapshot appropriately when an endpoint is
disposed of
........
Merged revisions 391489 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 391507 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@391521 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch fixes two memory leaks:
* A memory leak in packing channels into a multi-channel blob payload when
publishing dial messages. The multi-channel blob payload does not steal
the references - this approach was chosen because it works well with the
RAII_VAR macro. Unfortunately, this does mean that you actually have to use
the RAII_VAR macro (or manually deref it yourself)
* RTP instances returned as a result of one of the glue operations are ref
counted and have to be de-ref'd appropriately. We now do that, as saying
that we should do it and then not would be silly.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@391479 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When checking compatability for the native RTP bridge technology there is a
race condition between clearing framehooks that are destroyed when leaving
certain bridges with certain technologies (such as bridge_native_rtp) and
joining bridges with the bridge_native_rtp technology. Yes, that means a
channel in a native RTP bridge could move to another native RTP bridge and
be considered incompatible with the new native RTP bridge causing it to
revert to a simple bridge technology0. This fixes that bug by ignoring
framehooks that have been marked for destruction when checking for
compatibility with the bridge_native_rtp technology.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@391453 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When a Stasis message type is defined in a loadable module, handling
those messages for AMI and res_stasis events can be cumbersome.
This patch adds a vtable to stasis_message_type, with to_ami and
to_json virtual functions. These allow messages to be handled
abstractly without putting module-specific code in core.
As an example, the VarSet AMI event was refactored to use the to_ami
virtual function.
(closes issue ASTERISK-21817)
Review: https://reviewboard.asterisk.org/r/2579/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@391403 65c4cc65-6c06-0410-ace0-fbb531ad65f3
JSON objects are reference stealing. Hence, if you've RAII_VAR'd some
subobject and want to pack it into another JSON object, you have to bump
the reference count. Using the 'O' option during the pack will bump the
reference count for you.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@391314 65c4cc65-6c06-0410-ace0-fbb531ad65f3
People who use the features.conf.sample file from Asterisk 11 and before in trunk were
given a rude awakening when features configuration changes were made. Because it uses the
config framework and the config framework is strict about what is accepted and what isn't,
people that had parking options configured found that Asterisk no longer started. This is
because parking options are currently handled in res_parking.conf instead of features.conf.
This fix seeks to create a temporary band-aid fix for the problem, but having parking options
from the general section be passed to a handler that will simply print that the option is no
longer supported. This will not cause Asterisk to exit.
The fix only applies to options in the general section. There are two main reasons for this:
1) The sample features.conf file only has parking options in the general section. There are no
configured parking lots. Therefore it's not quite as "urgent" to get the parking lot parsing
fixed.
2) The plan is to move parking configuration back from res_parking.conf to features.conf. When
that happens, the parking lots will also be addressed at that time.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@391269 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This adds support for Stasis applications to receive bridge-related
messages when the application shows interest in a given bridge.
To supplement this work and test it, this also adds support for the
following bridge-related Stasis-HTTP functionality:
* GET stasis/bridges
* GET stasis/bridges/{bridgeId}
* POST stasis/bridges
* DELETE stasis/bridges/{bridgeId}
* POST stasis/bridges/{bridgeId}/addChannel
* POST stasis/bridges/{bridgeId}/removeChannel
Review: https://reviewboard.asterisk.org/r/2572/
(closes issue ASTERISK-21711)
(closes issue ASTERISK-21621)
(closes issue ASTERISK-21622)
(closes issue ASTERISK-21623)
(closes issue ASTERISK-21624)
(closes issue ASTERISK-21625)
(closes issue ASTERISK-21626)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@391199 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Topics need to be disposed of prior to the message types that are published
on them. This includes topic pools. This prevents an assertion from being
raised on shutdown.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@391040 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This moves the initialization call behind the protection against
reloads. We don't want to re-add message router routes during
reloads.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@391016 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch allows astmm to access the backtrace generation code in Asterisk.
When memory is allocated, a backtrace is created and stored with the memory
region that tracks the allocation. If a memory corruption is detected, the
backtrace is printed to the astmm log. The backtrace will make use of the
BETTER_BACKTRACES build option if available.
As a result, this patch moves the backtrace generation code into its own file
and uses the non-wrapped versions of the C library memory allocation routines.
This allows the memory allocation code to safely use the backtrace generation
routines without infinitely recursing.
Review: https://reviewboard.asterisk.org/r/2567
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@391012 65c4cc65-6c06-0410-ace0-fbb531ad65f3
* Added a start technology callback that technologies can use to start
bridging operations. It is expected that native bridges will find this
useful.
* Factored out bridge_channel_complete_join().
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@390991 65c4cc65-6c06-0410-ace0-fbb531ad65f3
A three party bridge uses the softmix bridging technology. This
technology has a dedicated thread used to perform the analog mixing. When
one of these parties leaves the bridge, the bridge technology is changed
from the softmix technology to a two-party mixing technology. Changing
technologies is done by removing channels from the old technology and
adding them to the new technology. Since the remaining channels do not
leave the bridge, the softmix mixing thread could continue to process all
channels in the bridge. If the bridge code is not able to start
destruction of the softmix technology before the softmix mixing thread
wakes up, a crash happens.
* Added a stop technology callback that technologies can use to request
any helper threads to stop in preparation for being destroyed.
(closes issue AST-1156)
Reported by: John Bigelow
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@390975 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Stasis cache clear message payloads now consist of a stasis_message
representative of the message to be cleared from the cache. This allows
multiple parallel caches to coexist and be cleared properly by the same
cache clear message even when keyed on different fields.
This change fixes a bug where multiple cache clears could be posted for
channels. The cache clear is now produced in the destructor instead of
ast_hangup.
Additionally, dummy channels are no longer capable of producing channel
snapshots.
Review: https://reviewboard.asterisk.org/r/2596
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@390830 65c4cc65-6c06-0410-ace0-fbb531ad65f3
* Change applicationmap and featuregroup to replace duplicate config items
rather than reject them.
* Remove some unneeded warning messages when getting the applicationmap
allows duplicates from DYNAMIC_FEATURES.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@390803 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When reading from a config file, it's important to reject duplicates. Otherwise,
featuregroups will have ambiguity when pointing to applicationmap items. However,
when constructing the channel's current applicationmap, we don't care about duplicate
names since it's the DTMF that identifies a feature, not the name.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@390787 65c4cc65-6c06-0410-ace0-fbb531ad65f3
* The channel variable ATTENDED_TRANSFER_COMPLETE_SOUND is no longer
channel driver specific. If the channel variable is set on the
transferrer channel, the sound will be played to the target of an attended
transfer.
* The channel variable BRIDGEPEER becomes a comma separated list of peers
in a multi-party bridge. The BRIDGEPEER value can have a maximum of 10
peers listed. Any more peers in the bridge will not be included in the
list. BRIDGEPEER is not valid in holding bridges like parking since those
channels do not talk to each other even though they are in a bridge.
* The channel variable BRIDGEPVTCALLID is only valid for two party bridges
and will contain a value if the BRIDGEPEER's channel driver supports it.
* The channel variable DYNAMIC_PEERNAME is redundant with BRIDGEPEER and
is removed. The more useful DYNAMIC_WHO_ACTIVATED gives the channel name
that activated the dynamic feature.
* The channel variables DYNAMIC_FEATURENAME and DYNAMIC_WHO_ACTIVATED are
set only on the channel executing the dynamic feature. Executing a
dynamic feature on the bridge peer in a multi-party bridge will execute it
on all peers of the activating channel.
(closes issue ASTERISK-21555)
Reported by: Matt Jordan
Review: https://reviewboard.asterisk.org/r/2582/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@390771 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Features configuration is handled in its own API in
features_config.h and features_config.c. This way, features
configuration is accessible to anything that needs it.
In addition, features configuration has been altered to
be more channel-oriented. Most callers of features API
code will be supplying a channel so that the individual
channel's settings will be acquired rather than the global
setting.
Missing from this commit is XML documentation for the
features configuration. That will be handled in a separate
commit.
Review: https://reviewboard.asterisk.org/r/2578/
(issue ASTERISK-21542)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@390751 65c4cc65-6c06-0410-ace0-fbb531ad65f3
* Fix external attended transfer bridge move/swap method. One of the
transferrer channels was not kicked out of the bridge.
* Fix several off-nominal extended attended transfer paths. Mainly the
channels involved needed to be hung up or kicked out of the bridge.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@390613 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The ast_multi_channel_blob_get_channel function does not bump the refcount on
the channel snapshot that it returns. This is typical for Stasis message
payloads, since being immutable means that the object won't get unreffed out
from underneath you.
The manager code for chanspy was unreffing the snapshots it got out of the
multi-channel blob, which was one unref too many.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@390584 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This change is used to make bridge hook removal more generic. This way,
depending on the circumstance, the appropriate bridge hooks may be
removed.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@390510 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When channels are added to an endpoint, the code originally posted a channel
snapshot to the endoint's topic directly. Turns out, this is a bad idea.
This causes the endpoint to see an inconsistent view of the channel, since it
will later receive in-flight messages with old channel snapshots.
This patch instead just publishes channel state immediately after setting up
the forward to the endpoint's topic. This gives the endpoints a consistent
view of the channel's state.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@390472 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The library that provides UUID support varies greatly from system to
system. On most Linux distros, it's in libuuid. On OpenBSD, it's in
libe2fs-uuid. On OS X, it is in libsystem.
This patch plays hide-and-seek with UUID support, looking for it in the
three places we know about. It also corrects the Makefile so that it uses
the configured library name and include path.
(closes issue ASTERISK-21816)
Reported by: Brad Latus (snuffy)
Tested by: Brad Latus (snuffy)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@390352 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Refactor some channel blob publishing code to use
ast_channel_publish_blob now that it is available and fix a JSON
reference leak that was occurring during varset publishing.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@390317 65c4cc65-6c06-0410-ace0-fbb531ad65f3
* DTMF attended and blind transfers have hold/unhold behavior restored.
* External attended and blind transfers unhold the transfered party when
the transfer is initiated.
* Made prohibit blind transferring a bridge marked as masquerade only.
(ConfBridge bridges)
* Made running an application or playing a file inside a bridge post the
hold/unhold messages if MOH is requested.
Review: https://reviewboard.asterisk.org/r/2574/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@390289 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch addresses issues during immediate shutdowns, where modules
are not unloaded, but Asterisk atexit handlers are run.
In the typical case, this usually isn't a big deal. But the
introduction of the Stasis message bus makes it much more likely for
asynchronous activity to be happening off in some thread during
shutdown.
During an immediate shutdown, Asterisk skips unloading modules. But
while it is processing the atexit handlers, there is a window of time
where some of the core message types have been cleaned up, but the
message bus is still running. Specifically, it's still running
module subscriptions that might be using the core message types. If a
message is received by that subscription in that window, it will
attempt to use a message type that has been cleaned up.
To solve this problem, this patch introduces ast_register_cleanup().
This function operates identically to ast_register_atexit(), except
that cleanup calls are not invoked on an immediate shutdown. All of
the core message type and topic cleanup was moved from atexit handlers
to cleanup handlers.
This ensures that core type and topic cleanup only happens if the
modules that used them are first unloaded.
This patch also changes the ast_assert() when accessing a cleaned up
or uninitialized message type to an error log message. Message type
functions are actually NULL safe across the board, so the assert was a
bit heavy handed. Especially for anyone with DO_CRASH enabled.
Review: https://reviewboard.asterisk.org/r/2562/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@390122 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Check the returned bridged pointer for NULL to avoid a crash. It looks
like chan_agent is returning a NULL pointer when it probably should be
returning a pointer to the channel the Agent channel is pretending to be.
(closes issue ASTERISK-21793)
Reported by: Rodrigo P. Telles
Patches:
jira_asterisk_21793_v1.8.patch (license #5621) patch uploaded by rmudgett
Tested by: Rodrigo P. Telles
........
Merged revisions 390044 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 390047 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@390068 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When ast_channel_cached_blob_create was merged,
ast_channel_blob_create_from_cache was partially removed in an
unresolved merge conflict. This restores ast_channel_blob_create_from_cache
and refactors usage of ast_channel_cached_blob_create (requires an
ast_channel) to use ast_channel_blob_create_from_cache (requires a
channel uniqueid) instead.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@389974 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The attended transfer API call can complete the attended transfer in a number of ways
depending on the current bridged states of the channels involved.
The hiding of masquerades is done in some bridging-related functions, such as the manager
Bridge action and the Bridge dialplan application. In addition, call pickup was edited
to "move" a channel rather than masquerade it.
Review: https://reviewboard.asterisk.org/r/2511
(closes issue ASTERISK-21334)
Reported by Matt Jordan
(closes issue Asterisk-21336)
Reported by Matt Jordan
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@389848 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Caching topics will during initialization attempt to reference
their message type. The message type therefore has to be
initialized prior to the topic to prevent the dreaded assertion.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@389813 65c4cc65-6c06-0410-ace0-fbb531ad65f3
* Initialize a Stasis-Core message type prior to initializing a caching topic.
The caching topic will attempt to use the message type.
* Don't attempt to publish Stasis-Core messages from remote console connections.
They aren't the main process; they shouldn't attempt to behave as it (they also
don't have the infrastructure to do so)
* Don't treat a JSON object as an ao2 object (whoops)
* In asterisk.c, ref bump the JSON even package that is distributed with the
event meta data. The callers assume that they own the reference, and the packing
routine steals references.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@389785 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch moves a number of AMI events over to the Stasis-Core message bus.
This includes:
* ChanSpyStart/Stop
* MonitorStart/Stop
* MusicOnHoldStart/Stop
* FullyBooted/Reload
* All Voicemail/MWI related events
In addition, it adds some Stasis-Core and AMI support for generic AMI messages,
refactors the message router in AMI to use a single router with topic
forwarding for the topics that AMI cares about, and refactors MWI message
types and topics to be more name compliant.
Review: https://reviewboard.asterisk.org/r/2532
(closes issue ASTERISK-21462)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@389733 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When Asterisk shuts down and shuts down the loggin gsubsystem, any
messages currently in flight will not get logged. This patch prevents the
loop writing messages from breaking out prematurely, such that all of the
messages are logged.
(closes issue ASTERISK-21716)
Reported by: Corey Farrell
patches:
logger-process-all-messages.patch uploaded by Corey Farrell (license 5909)
........
Merged revisions 389676 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 389677 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@389680 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Asterisk REST interface.
This adds the /playback/{playbackId}/control resource, which may be
POSTed to to pause, unpause, reverse, forward or restart the media
playback.
Attempts to control a playback that is not currently playing will
either return a 404 Not Found (because the playback object no longer
exists) or a 409 Conflict (because the playback object is still in the
queue to be played).
This patch also adds skipms and offsetms parameters to the
/channels/{channelId}/play resource.
(closes issue ASTERISK-21587)
Review: https://reviewboard.asterisk.org/r/2559
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@389603 65c4cc65-6c06-0410-ace0-fbb531ad65f3
and GET /playback/{playbackId}.
This allows an external application to initiate playback of a sound on a
channel while the channel is in the Stasis application.
/play commands are issued asynchronously, and return immediately with
the URL of the associated /playback resource. Playback commands queue up,
playing in succession. The /playback resource shows the state of a
playback operation as enqueued, playing or complete. (Although the
operation will only be in the 'complete' state for a very short time,
since it is almost immediately freed up).
(closes issue ASTERISK-21283)
(closes issue ASTERISK-21586)
Review: https://reviewboard.asterisk.org/r/2531/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@389587 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The caching topic (which refers to the message type) was created before the
message type. If the initial subscription message gets processed before
the type can be initialized, the assertion about using an uninitialized type
fires.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@389519 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Breaks many things until they can be reworked. A partial list:
chan_agent
chan_dahdi, chan_misdn, chan_iax2 native bridging
app_queue
COLP updates
DTMF attended transfers
Protocol attended transfers
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@389378 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This may alleviate some of the CDR woes with originated channels, as CDRs
do like to know when a channel was originated. Eventually this will get
converted to be a channel flag, so its location is still good to know
post the great CDR shakeup of 2013.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@389306 65c4cc65-6c06-0410-ace0-fbb531ad65f3
In r388005, macros were introduced to consistently define message
types. This added an assert if a message type was used either before
it was initialized or after it had been cleaned up. It turns out that
this assertion fires during shutdown.
This actually exposed a hidden shutdown ordering problem. Since
unsubscribing is asynchronous, it's possible that the message types
used by the subscription could be freed before the final message of
the subscription was processed.
This patch adds stasis_subscription_join(), which blocks until the
last message has been processed by the subscription. Since joining was
most commonly done right after an unsubscribe, a
stasis_unsubscribe_and_join() convenience function was also added.
Similar functions were also added to the stasis_caching_topic and
stasis_message_router, since they wrap subscriptions and have similar
problems.
Other code in trunk was refactored to join() where appropriate, or at
least verify that the subscription was complete before being
destroyed.
Review: https://reviewboard.asterisk.org/r/2540
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@389011 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch does two things:
* It fixes a bug where the outbound channel's application/data set by the
dialing API/app_dial is not communicated until the channel is hung up.
If that happens, AMI would incorrectly send a NewExten event immediately
after a Hangup. This isn't really AMI's fault, as the dialing APIs never
communicated the 'helpful' app/data on the outbound channel until it was
hungup.
* It makes public sending a stasis message about a change in channel state.
This is useful enough that - for now at least - it should be public. If
operations on a channel go to being more coarse-grained, this function
could be made private again.
Review: https://reviewboard.asterisk.org/r/2548
Note that this problem was found and reported by Matt DiMeo.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@388976 65c4cc65-6c06-0410-ace0-fbb531ad65f3
If DEBUG_THREADS is enabled __ast_rwlock_destroy causes a segfault while trying
to access a possible NULL t->track object. A NULL check has been added before
trying to access the memory.
(closes issue ASTERISK-21724)
Reported by: Corey Farrell
Fixed by: Corey Farrell
Patches:
ast_rwlock_destroy-segv.patch uploaded by Corey Farrell (license 5909)
........
Merged revisions 388838 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 388839 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@388840 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The debug versions of ao2_ref() should only be used if REF_DEBUG is
enabled so nothing is written to /tmp/refs unexpectedly.
(closes issue ASTERISK-21785)
Reported by: abelbeck
Patches:
jira_asterisk_21785_v11.patch (license #5621) patch uploaded by rmudgett
Tested by: abelbeck
........
Merged revisions 388700 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@388701 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The CALL-ID (ie [C-00000074]) is missing when logging to syslog. This was just
an oversight when this feature was added.
* Add CALL-IDs when using syslog
(closes issue ASTERISK-21430)
Reported by: Nikola Ciprich
Tested by: Nikola Ciprich, Michael L. Young
Patches:
asterisk-21430-syslog-callid_trunk.diff by Michael L. Young (license 5026)
Review: https://reviewboard.asterisk.org/r/2526/
........
Merged revisions 388605 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@388617 65c4cc65-6c06-0410-ace0-fbb531ad65f3
I've noticed when doing a graceful shutdown that the res_stasis_http.so
module gets unloaded before the modules that use it, which causes some
asserts during their unload.
While r386928 was a quick hack to get it to not assert and die, this
patch increases the use counts on res_stasis.so and res_stasis_http.so
properly. It's a bigger change than I expected, hence the review instead
of just committing it.
Review: https://reviewboard.asterisk.org/r/2489/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@388350 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This change adds a framework in res_stasis for handling events from
channel topics. JSON event generation and validation code is created
from event documentation in rest-api/api-docs/events.json to assist in
JSON event generation, ensure consistency, and ensure that accurate
documentation is available for ALL events that are received by
res_stasis applications.
The userevent application has been refactored along with the code that
handles userevent channel blob events to pass the headers as key/value
pairs in the JSON blob. As a side-effect, app_userevent now handles
duplicate keys by overwriting the previous value.
Review: https://reviewboard.asterisk.org/r/2428/
(closes issue ASTERISK-21180)
Patch-By: Kinsey Moore <kmoore@digium.com>
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@388275 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The <arpa/nameser_compat.h> was introduced way back in OS X Panther, which
itself was end-of-lifed back in 2007. We can assume that any OS X machine
we build on will need that header file :-)
Why bother removing it? The flag we're checking (__APPLE_CC__) is actually
Apple's build number. Self-compiled versions of GCC (such as installing the
latest version of GCC from homebrew) sets the value to 0, making it useless
for this sort of compile flaggery.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@388045 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When we first introduced the channel blob types, the JSON blobs were
self identifying by a required "type" field in the JSON object
itself. This, as it turns out, was a bad idea.
When we introduced the message router, it was useless for routing based
on the JSON type. And messages had two type fields to check: the
stasis_message_type() of the message itself, plus the type field in the
JSON blob (but only if it was a blob message).
This patch corrects that mistake by removing the required type field
from JSON blobs, and introducing first class stasis_message_type objects
for the actual message type.
Since we now will have a proliferation of message types, I introduced a
few macros to help reduce the amount of boilerplate necessary to set
them up.
Review: https://reviewboard.asterisk.org/r/2509
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@388005 65c4cc65-6c06-0410-ace0-fbb531ad65f3
An endpoint is an external device/system that may offer/accept
channels to/from Asterisk. While this is a very useful concept for end
users, it is surprisingly not a core concept within Asterisk itself.
This patch defines ast_endpoint as a separate object, which channel
drivers may use to expose their concept of an endpoint. As the channel
driver creates channels, it can use ast_endpoint_add_channel() to
associate channels to the endpoint. This updated the endpoint
appropriately, and forwards all of the channel's events to the
endpoint's topic.
In order to avoid excessive locking on the endpoint object itself, the
mutable state is not accessible via getters. Instead, you can create a
snapshot using ast_endpoint_snapshot_create() to get a consistent
snapshot of the internal state.
This patch also includes a set of topics and messages associated with
endpoints, and implementations of the endpoint-related RESTful
API. chan_sip was updated to create endpoints with SIP peers, but the
state of the endpoints is not updated with the state of the peer.
Along for the ride in this patch is a Stasis test API. This is a
stasis_message_sink object, which can be subscribed to a Stasis
topic. It has functions for blocking while waiting for conditions in
the message sink to be fulfilled.
(closes issue ASTERISK-21421)
Review: https://reviewboard.asterisk.org/r/2492/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@387932 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This change adds the ability for modules to add themselves as observers
to sorcery object types. Observers can be notified when objects are
created, updated, or deleted as well as when the object type is loaded or
reloaded. Observer notifications are done using a thread pool in a serialized
fashion so the caller of the sorcery API calls is minimally impacted.
This also adds the ability to create JSON changesets of a sorcery object.
Tests are also present to confirm all of the above functionality.
Review: https://reviewboard.asterisk.org/r/2477/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@387662 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch:
* Cleans up some doxygen
* Prevents leaking the system level Stasis topics and messages
on exit (users of valgrind will be happier)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@387633 65c4cc65-6c06-0410-ace0-fbb531ad65f3
There is a reason the heap comparison functions like qsort(), and other
comparison functions specify <0, >0, and =0 for the return values.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@387209 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Way back when in the dark days of Asterisk 1.8.9, blind transferring a call
in a context that included the 'h' extension would inadvertently execute the
hangup code logic on the transferred channel. This was a "bad thing". The fix
was to properly check for the softhangup flags on the channel and only execute
the 'h' extension logic (and, in later versions, hangup handler logic) if the
channel was well and truly dead (Jim).
Unfortunately, CDRs are fickle. Setting the softhangup flag when we detected
that the channel was leaving the bridge (but not to die) caused some crucial
snippet of CDR code, lying in ambush in the middle of the bridging code, to
not get executed. This had the effect of blowing away one of the CDRs that is
typically created during a blind transfer.
While we live and die by the adage "don't touch CDRs in release branches", this
was our bad. The attached patch restores the CDR behavior, and still manages to
not run the 'h' extension during a blind transfer (at least not when it's
supposed to).
Thanks to Steve Davies for diagnosing this and providing a fix.
Review: https://reviewboard.asterisk.org/r/2476
(closes issue ASTERISK-21394)
Reported by: Ishfaq Malik
Tested by: Ishfaq Malik, mjordan
patches:
fix_missing_blindXfer_cdr2 uploaded by one47 (License 5012)
........
Merged revisions 387036 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 387038 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@387039 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This change does the following:
1. Adds the sorcery realtime module
2. Adds unit tests for the sorcery realtime module
3. Changes the realtime core to use an ast_variable list instead of variadic arguments
4. Changes all realtime drivers to accept an ast_variable list
Review: https://reviewboard.asterisk.org/r/2424/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@386731 65c4cc65-6c06-0410-ace0-fbb531ad65f3
If a system allows for its usage, Asterisk will use glob to help parse
Asterisk .conf files. The config file loading routine was leaking the memory
allocated by the glob() routine when the config file was in an unmodified
or invalid state.
This patch properly calls globfree in those off nominal paths.
(closes issue ASTERISK-21412)
Reported by: Corey Farrell
patches:
config_glob_leak.patch uploaded by Corey Farrell (license 5909)
........
Merged revisions 386672 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 386677 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@386685 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch cleans up two things features:
* It properly unregisters the CLI commands that features registered
* It cancels and performs a pthread_join on the created parking thread. This
not only properly joins a non-detached thread, but also prevents disposing
of the parking lots prior to the parking thread completely exiting.
(closes issue ASTERISK-21407)
Reported by: Corey Farrell
patches:
features_shutdown-r2.patch uploaded by Corey Farrell (License 5909)
........
Merged revisions 386641 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 386642 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@386676 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The pimp_my_sip branch is being merged at this point because
it offers basic functionality, and from an API standpoint, things
are complete.
SIP work is *not* feature-complete; however, with the completion
of the SUBSCRIBE/NOTIFY API, all APIs (except a PUBLISH API) have
been created, and thus it is possible for developers to attempt
to create new SIP work.
API documentation can be found in the doxygen in the code, but
usability documentation is still lacking.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@386540 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The two party bridging loops were changing the bridge peer pointers
without the channel locks held. Thus when ast_channel_massquerade()
tested and used the pointer there is a small window of opportunity for the
pointers to become NULL even though the masquerade code has the channels
locked.
(closes issue ASTERISK-21356)
Reported by: William luke
Patches:
jira_asterisk_21356_v11.patch (license #5621) patch uploaded by rmudgett
Tested by: William luke
........
Merged revisions 386256 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 386286 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@386289 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The API itself is documented using Swagger, a lightweight mechanism for
documenting RESTful API's using JSON. This allows us to use swagger-ui
to provide executable documentation for the API, generate client
bindings in different languages, and generate a lot of the boilerplate
code for implementing the RESTful bindings. The API docs live in the
rest-api/ directory.
The RESTful bindings are generated from the Swagger API docs using a set
of Mustache templates. The code generator is written in Python, and
uses Pystache. Pystache has no dependencies, and be installed easily
using pip. Code generation code lives in rest-api-templates/.
The generated code reduces a lot of boilerplate when it comes to
handling HTTP requests. It also helps us have greater consistency in the
REST API.
(closes issue ASTERISK-20891)
Review: https://reviewboard.asterisk.org/r/2376/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@386232 65c4cc65-6c06-0410-ace0-fbb531ad65f3
In messages.c, there are several places in the code where we create a
tmp_tech_holder and pass that into an ao2_find call. Unfortunately, we
weren't initializing the rwlock on the tmp_tech_holder, which the hash
function was locking. It's apparently harmless, but still not the best
code.
This patch extracts all that copy/pasted code into two functions,
msg_find_by_tech and msg_find_by_tech_name, which properly initialize
and destroy the rwlock on the tmp_tech_holder.
Review: https://reviewboard.asterisk.org/r/2454/
........
Merged revisions 386006 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@386019 65c4cc65-6c06-0410-ace0-fbb531ad65f3
In the move from Asterisk's event system to Stasis, this makes
distributed device state aggregation always-on, removes unnecessary
task processors where possible, and collapses aggregate and
non-aggregate states into a single cache for ease of retrieval. This
also removes an intermediary step in device state aggregation.
Review: https://reviewboard.asterisk.org/r/2389/
(closes issue ASTERISK-21101)
Patch-by: Kinsey Moore <kmoore@digium.com>
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@385860 65c4cc65-6c06-0410-ace0-fbb531ad65f3
After some discussion on asterisk-dev, it was decided that the bulk of
the logic in app_stasis actually belongs in a resource module instead
of the application module.
This patch does that, leaves the app specific stuff in app_stasis, and
fixes up everything else to be consistent with that change.
* Renamed test_app_stasis to test_res_stasis
* Renamed app_stasis.h to stasis_app.h
* This is still stasis application support, even though it's no
longer in an app_ module. The name should never have been tied to
the type of module, anyways.
* Now that json isn't a resource module anymore, moved the
ast_channel_snapshot_to_json function to main/stasis_channels.c,
where it makes more sense.
Review: https://reviewboard.asterisk.org/r/2430/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@385742 65c4cc65-6c06-0410-ace0-fbb531ad65f3
refactored to use these events rather than producing the events directly
in channel.c. Finally, the code was added to app_stasis to produce
DTMF events on the WebSocket.
The AMI events are completely backward compatible, including sending
events on transmitted DTMF, and sending DTMF start events.
The Stasis-HTTP events are somewhat simplified. Since DTMF start and
DTMF send events are generally less useful, Stasis-HTTP will only send
events on received DTMF end.
(closes issue ASTERISK-21282)
(closes issue ASTERISK-21359)
Review: https://reviewboard.asterisk.org/r/2439
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@385734 65c4cc65-6c06-0410-ace0-fbb531ad65f3
These functions are already used in one branch (jrose's parking branch)
and will soon be used in other branches as well.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@385522 65c4cc65-6c06-0410-ace0-fbb531ad65f3
protected by the features_lock.
* Made all calls to ast_find_call_feature() have the features_lock held.
* Fixed set_config_flags() to actually use find_group() to look for
feature groups in DYNAMIC_FEATURES. The code originally assumed all
feature groups were listed in DYNAMIC_FEATURES.
* Make everyone use ast_rdlock_call_features(),
ast_unlock_call_features(), and new ast_wrlock_call_features() instead of
directly calling the rwlock API on features_lock.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@385277 65c4cc65-6c06-0410-ace0-fbb531ad65f3
For the events that have been ported to Stasis, this was broken in
r384910, when a couple of lines of code was lost in a merge.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@385236 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The settings saved on the channel for FEATURE()/FEATUREMAP() were only
for that channel. This patch adds the ability to have these settings
inherited to child channels if you set FEATURE(inherit)=yes.
Closes issue ASTERISK-21306.
Review: https://reviewboard.asterisk.org/r/2415/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@385088 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch does the following:
* A new Stasis payload has been defined for multi-channel messages. This
payload can store multiple ast_channel_snapshot objects along with a single
JSON blob. The payload object itself is opaque; the snapshots are stored
in a container keyed by roles. APIs have been provided to query for and
retrieve the snapshots from the payload object.
* The Dial AMI events have been refactored onto Stasis. This includes dial
messages in app_dial, as well as the core dialing framework. The AMI events
have been modified to send out a DialBegin/DialEnd events, as opposed to
the subevent type that was previously used.
* Stasis messages, types, and other objects related to channels have been
placed in their own file, stasis_channels. Unit tests for some of these
objects/messages have also been written.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@384910 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This is the API that binds the Stasis dialplan application to external
Stasis applications. It also adds the beginnings of WebSocket
application support.
This module registers a dialplan function named Stasis, which is used
to put a channel into the named Stasis app. As a channel enters and
leaves the Stasis diaplan application, the Stasis app receives a
'stasis-start' and 'stasis-end' events.
Stasis apps register themselves using the stasis_app_register and
stasis_app_unregister functions. Messages are sent to an application
using stasis_app_send.
Finally, Stasis apps control channels through the use of the
stasis_app_control object, and the family of stasis_app_control_*
functions.
Other changes along for the ride are:
* An ast_frame_dtor function that's RAII_VAR safe
* Some common JSON encoders for name/number, timeval, and
context/extension/priority
Review: https://reviewboard.asterisk.org/r/2361/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@384879 65c4cc65-6c06-0410-ace0-fbb531ad65f3
OBJ_PARTIAL_KEY searching a rbtree did not find all possible matches if
the container did not accept duplicates.
Added matching node bias to indicate which matching node is being searched
for: first, last, any.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@384616 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch fixes a bug introduced in r76703, wherein Asterisk could only parse
arguments in the so-called 'recommended' way, e.g., NoOp(foo,bar). The proper
syntax of NoOp,foo|bar is now parsed correctly.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@384452 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch fixes an issue of message ordering that occurs when
multiple topics are forwarded to an aggregator topic (such as
ast_channel_topic_all()).
It is (very reasonably) expected that the rules governing message
dispatch order still apply, so long as the messages start from the
same thread, and are received by the same subscription. Because the
existing code had an additional layer of dispatching via the Stasis
thread pool for forwards, those promises couldn't be kept.
Forwarding subscriptions no longer have their own mailbox, and now
dispatch directly from the forwarding topic's stasis_publish()
call. This means that the topic's lock is held for the duration of not
only a message's dispatch, but the dispatch of all the forwards. This
shouldn't be a problem right now, but if an aggregator topic had many
subscribers, it could become a problem. But I figure we can write more
clever code when the time comes, if necessary.
Review: https://reviewboard.asterisk.org/r/2419/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@384413 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch migrates the TestEvent AMI events to first be dispatched over the
Stasis-Core message bus. This helps to preserve the ordering of the events
with other events in the AMI system, such as the various channel related
events.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@384389 65c4cc65-6c06-0410-ace0-fbb531ad65f3
* Updated test_uuid.c to test the new API call.
* Made system use the new API call to eliminate "10's of lines" where
used.
* Fixed untested ast_strdup() return in stasis_subscribe() by eliminating
the need for it. struct stasis_subscription now contains the uniqueid[]
string.
* Fixed some issues in exchangecal_write_event():
Create uid with enough space for a UUID string to avoid a realloc.
Fix off by one error if the calendar event provided a UUID string.
There is no need to check for NULL before calling ast_free().
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@384302 65c4cc65-6c06-0410-ace0-fbb531ad65f3
While looking at the security vulnerability in ASTERISK-20967, Walter noticed
a file descriptor leak and some other issues in off nominal code paths. This
patch corrects them.
Note that this patch is not related to the vulnerability in ASTERISK-20967,
but the patch was placed on that issue.
(closes issue ASTERISK-20967)
Reported by: wdoekes
patches:
issueA20967_file_leak_and_unused_wkspace.patch uploaded by wdoekes (License 5674)
........
Merged revisions 384118 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 384119 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@384120 65c4cc65-6c06-0410-ace0-fbb531ad65f3
AST-2012-014, fixed in January of this year, contained a fix for Asterisk's
HTTP server for a remotely-triggered crash. While the fix put in place fixed
the possibility for the crash to be triggered, a denial of service vector still
exists with that solution if an attacker sends one or more HTTP POST requests
with very large Content-Length values. This patch resolves this by capping
the Content-Length at 1024 bytes. Any attempt to send an HTTP POST with
Content-Length greater than this cap will not result in any memory allocation.
The POST will be responded to with an HTTP 413 "Request Entity Too Large"
response.
This issue was reported by Christoph Hebeisen of TELUS Security Labs
(closes issue ASTERISK-20967)
Reported by: Christoph Hebeisen
patches:
AST-2013-002-1.8.diff uploaded by mmichelson (License 5049)
AST-2013-002-10.diff uploaded by mmichelson (License 5049)
AST-2013-002-11.diff uploaded by mmichelson (License 5049)
........
Merged revisions 383978 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@383980 65c4cc65-6c06-0410-ace0-fbb531ad65f3
r375757 attempted to resolve a race condition between multiple submissions of
CDRs while in batch mode from attempting to destroy the scheduled batch
submission by extending the batch CDR lock. Unfortunately, this causes a
deadlock between the pending CDR lock and the batch CDR lock. This patch
resolves the intent of r375757 by simply providing a new lock that protects
the scheduling of the batches. The original batch CDR lock is kept to protect
manipulation of the batch CDR settings, but has been placed such that it
is not held when the pending lock is held.
Thanks to Chase Venters for providing lock analysis on the issue.
(issue ASTERISK-21162)
Reported by: Chase Venters
........
Merged revisions 383839 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 383840 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@383841 65c4cc65-6c06-0410-ace0-fbb531ad65f3
HangupRequest and SoftHangupRequest are now ast_channel_blob Stasis
messages, with the cause code as an optional field in the blob.
NewCallerid now simply watches for changes in the callerid information
in channel snapshots, and creates the AMI event appropriately.
Since the original NewCallerid event honored the channelvars setting
in manager.conf, the channel variables configured there had to become
a part of the channel snapshot. These are now a part of every snapshot
based event, making the configuration description "every time a
channel-oriented event is emitted" less of a lie.
There a a few other changes wrapped up in here as well.
* When ast_channel_topic() is given NULL for a channel, it returns
the ast_channel_topic_all() topic instead of NULL. This can clean
up a lot of NULL checking we're doing currently.
* The fields Cause and Cause-txt were removed from the base channel
information and put only on the Hangup events, since those fields
are meaningless outside of a Hangup event.
* Removed the pipe-delimiter processing of the channelvars field,
since that's been deprecated forever.
(closes issue ASTERISK-21096)
Review: https://reviewboard.asterisk.org/r/2405/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@383726 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Core modules don't honor <depend> flags in MODULEINFO, which broke jansson
if specified --with-jansson to configure.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@383633 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When I moved res_json.c to json.c, I left the MODULE_INFO stuff in there,
which was interesting if you ran module show. I also forgot to call what
was in module_load() from asterisk main().
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@383611 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch started out simply as fixing the bouncing tests introduced
in r382685, but required some other changes to give it a decent
implementation.
To fix the bouncing tests, the UserEvent and Newexten AMI events
needed to be refactored to dispatch via Stasis. Dispatching directly
to AMI resulted in those events sometimes getting ahead of the
associated Newchannel events, which would understandably confuse anyone.
I found that instead of creating a zillion different message types and
structures associated with them, it would be preferable to define a
message type that has a channel snapshot and a blob of structured data
with a small bit of additional information. The JSON object model
provides a very nice way of representing structured data, so I went
with that.
* Move JSON support from res_json.c to main/json.c
* Made libjansson-dev a required dependency
* Added an ast_channel_blob message type, which has a channel
snapshot and JSON blob of data.
* Changed UserEvent and Newexten events so that they are dispatched
via ast_channel_blob messages on the channel's topic.
* Got rid of the ast_channel_varset message; used ast_channel_blob
instead.
* Extracted the manager functions converting Stasis channel events to
AMI events into manager_channel.c.
(issue ASTERISK-21096)
Review: https://reviewboard.asterisk.org/r/2381/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@383579 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Because of the way that topics were handled when publishing, it was
possible to dispatch a message to a subscription after that
subscription had been unsubscribed such that the dispatched message
arrived at the callback after the callback had received its final
message. In callbacks that cleaned up user data, this would often cause
a segfault. This has been resolved by locking the topic during the
entirety of dispatch. To prevent long publishing and topic locking
times, forwarding subscriptions have been made to be standard
subscriptions instead of mailboxless subscriptions which were
dispatched at publishing time.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@383422 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When using scoped locks, the unref of an AO2 object should happen after
the unlock occurs which requires usage of scoped refs.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@383377 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Remove MWI's dependency on the event system by moving it to
Stasis-core. This also introduces forwarding topic pools in Stasis-core
which aggregate many dynamically allocated topics into a single primary
topic.
Review: https://reviewboard.asterisk.org/r/2368/
(closes issue ASTERISK-21097)
Patch-by: Kinsey Moore
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@383284 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Often times, when subscribing to a topic, one wants to handle
different message types differently. While one could cascade if/else
statements through the subscription handler, it is much cleaner to
specify a different callback for each message type. The
stasis_message_router is here to help!
A stasis_message_router is constructed for a particular stasis_topic,
which is subscribes to. Call stasis_message_router_unsubscribe() to
cancel that subscription.
Once constructed, routes can be added using
stasis_message_router_add() (or stasis_message_router_set_default()
for any messages not handled by other routes). There may be only one
route per stasis_message_type. The route's callback is invoked just as
if it were a callback for a subscription; but it only gets called for
messages of the specified type.
(issue ASTERISK-20887)
Review: https://reviewboard.asterisk.org/r/2390/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@383242 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Unsubscribing things in Asterisk seems to very commonly follow with
NULLing out the variable that was unsubscribed. This change makes that
a bit simpler.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@383168 65c4cc65-6c06-0410-ace0-fbb531ad65f3
AMI, HTTP, and chan_sip all support TLS in some way, but none of them
support all the options that Asterisk's TLS core is capable of
interpreting. This prevents consumers of the TLS/SSL layer from setting
TLS/SSL options that they do not support.
This also gets tlsverifyclient closer to a working state by requesting
the client certificate when tlsverifyclient is set. Currently, there is
no consumer of main/tcptls.c in Asterisk that supports this feature and
so it can not be properly tested.
Review: https://reviewboard.asterisk.org/r/2370/
Reported-by: John Bigelow
Patch-by: Kinsey Moore
(closes issue AST-1093)
........
Merged revisions 383165 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 383166 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@383167 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The cache dump mechanism allows the developer to retreive multiple
items of a given type (or of all types) from the cache residing in a
stasis caching topic in addition to the existing single-item cache
retreival mechanism. This also adds to the caching unit tests to
ensure that the new cache dump mechanism is functioning properly.
Review: https://reviewboard.asterisk.org/r/2367/
(issue ASTERISK-21097)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@382705 65c4cc65-6c06-0410-ace0-fbb531ad65f3
For the initial use of this bus, I took some work kmoore did creating
channel snapshots. So rather than create AMI events directly in the
channel code, this patch generates Stasis events, which manager.c uses
to then publish the AMI event.
This message bus provides a generic publish/subscribe mechanism within
Asterisk. This message bus is:
- Loosely coupled; new message types can be added in seperate modules.
- Easy to use; publishing and subscribing are straightforward
operations.
In addition to basic publish/subscribe, the patch also provides
mechanisms for message forwarding, and for message caching.
(issue ASTERISK-20887)
(closes issue ASTERISK-20959)
Review: https://reviewboard.asterisk.org/r/2339/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@382685 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Often, Asterisk may realize that a change in the source of an RTP stream is
about to occur and ask that the RTP engine reset it's lock on the current RTP
source. In certain scenarios, it may take awhile for the new remote system to
send RTP packets, while the old remote system may continue providing RTP during
that time period. This causes Asterisk to re-lock onto the old source, thereby
rejecting the new source when the old source stops sending RTP and the new
source begins.
This patch prevents that by having a constant secondary, 'secret' probation
mode enabled when an RTP source has been chosen. RTP packets from other sources
are always considered, but never chosen unless the current RTP source stops
sending RTP.
Review: https://reviewboard.asterisk.org/r/2364
(closes issue AST-1124)
Reported by: John Bigelow
Tested by: John Bigelow
(closes issue AST-1125)
Reported by: John Bigelow
Tested by: John Bigelow
........
Merged revisions 382573 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@382589 65c4cc65-6c06-0410-ace0-fbb531ad65f3
If ast_threadpool_set_size with a size equal to the current size, a
reference to a set_size_data structure would be leaked.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@382555 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Ownership of the listener reference is not transferred because the
listener is reffed when placed into the taskprocessor. Ensure that the
listener is dereffed properly.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@382489 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When converting AMI class authorizations to a string representation, the
method always appends the ALL class authorization. This is especially
important for events, as they should always communicate that class
authorization - even if the event itself does not specify ALL as a class
authorization for itself. (Events have always assumed that the ALL class
authorization is implied when they are raised)
Unfortunately, this did mean that specifying a user with restricted class
authorizations would show up in the 'manager show user' CLI command as
having the ALL class authorization.
Rather then modifying the existing string manipulation function, this patch
adds a function that will only return a string if the field being compared
explicitly matches class authorization field it is being compared against.
This prevents ALL from being returned unless it is actually specified for
the user.
(closes issue ASTERISK-20397)
Reported by: Johan Wilfer
........
Merged revisions 381939 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 381943 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@381949 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The incorrect callid was being written to the "data1" field in queue_log table
for transfer events. The callid of the queue was being written instead of the
transfer target's callid. This now gets the correct "transfer to" number and
places that in the "data1" field of the queue_log table when a transfer event
is triggered.
(closes issue ASTERISK-19960)
Reported by: vladimir shmagin
........
Merged revisions 381770 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 381791 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@381792 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When a module's configuration is not loadable, we still load the module but it
is not in a running state. When trying to troubleshoot, let's say, why
chan_motif is ignoring inbound XMPP traffic, there is no way to indicate that a
loaded module is not currently running.
(closes issue ASTERISK-21108)
Reported by: Rusty Newton
Tested by: Michael L. Young
Patches:
asterisk-21108_add_status-v2.diff Michael L. Young (license 5026)
Review: https://reviewboard.asterisk.org/r/2331/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@381749 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch fixes a crash in Asterisk that could be caused by using the
PresenceState AMI action while providing an invalid provider. This patch
also adds some additional warnings when a user attempts to provide the
PresenceState action with invalid data, and removes some NOTICE statements
that were still lurking in the code from testing.
(closes issue AST-1084)
Reported by: John Bigelow
Tested by: John Bigelow
........
Merged revisions 381594 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@381595 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch does two things:
1. It disables (temporarily) strict XML documentation checking for module
configurations. We should re-enable it before making any release from
trunk.
2. Pass the module flag AST_MODULE through sorcery. This means several of the
API calls are now macros and will do this automatically for you. The config
framework needs the module that objects are registering to so it can
properly construct the documentation. (This was already a required field,
but sorcery was getting by without it)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@381567 65c4cc65-6c06-0410-ace0-fbb531ad65f3
While autoservice is running and servicing a channel the callid is being stored
and removed in the thread's local storage for each iteration of the thread loop.
If debug was set to a sufficient level the log file would be spammed with callid
thread local storage debug messages.
Added a new function that checks to see if the callid to be stored is different
than what is already contained (if anything). If it is different then
store/replace and log, otherwise just leave as is. Also made it so all logging
of debug messages pertaining to the callid thread storage outputs only when
TEST_FRAMEWORK is defined.
(issue ASTERISK-21014)
(closes issue ASTERISK-21014)
Report by: Rusty Newton
Review: https://reviewboard.asterisk.org/r/2324/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@381557 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch allows a module to define its configuration in XML in source, such
that it can be parsed by the XML documentation engine. Documentation is
generated in a two-pass approach:
1. The documentation is first generated from the XML pulled from the source
2. The documentation is then enhanced by the registration of configuration
options that use the configuration framework
This patch include configuration documentation for the following modules:
* chan_motif
* res_xmpp
* app_confbridge
* app_skel
* udptl
Two new CLI commands have been added:
* config show help - show configuration help by module, category, and item
* xmldoc dump - dump the in-memory representation of the XML documentation to
a new XML file.
Review: https://reviewboard.asterisk.org/r/2278
Review: https://reviewboard.asterisk.org/r/2058
patches:
on review 2058 uploaded by twilson
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@381527 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The core module related to coloring terminal output was old and needed
some love. The main thing here was an attempt to get rid of the
obscene number of stack-local buffers that were allocated for no other
reason than to colorize some output. Instead, this uses a simple trick
to allocate several buffers within threadlocal storage, then
automatically rotates between them, so that you can make multiple calls
to the colorization routine within one function and not need to
allocate multiple buffers.
Review: https://reviewboard.asterisk.org/r/2241/
Patches:
bug.patch uploaded by Tilghman Lesher
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@381448 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch adds the ability to create a serializer from a thread pool. A
serializer is a ast_taskprocessor with the same contract as a default
taskprocessor (tasks execute serially) except instead of executing out
of a dedicated thread, execution occurs in a thread from a
ast_threadpool. Think of it as a lightweight thread.
While it guarantees that each task will complete before executing the
next, there is no guarantee as to which thread from the pool individual
tasks will execute. This normally only matters if your code relys on
thread specific information, such as thread locals.
This patch also fixes a bug in how the 'was_empty' parameter is computed
for the push callback, and gets rid of the unused 'shutting_down' field.
Review: https://reviewboard.asterisk.org/r/2323/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@381326 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Caching a struct ast_app pointer is not a good idea because someone could
unload the application. After the applicaiton unload the cached ast_app
pointer is no longer valid. Only pbx.c can cache the pointer because it
knows when the application is unloaded and removes the pointer.
* Fixed one-touch Monitor and MixMonitor to not cache the ast_app pointer
and not use the silly monitor_ok/mixmonitor_ok/stopmixmonitor_ok flags.
* Extracted bridge_check_monitor() from ast_bridge_call() and use propper
locking.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@381177 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Taking advantage of the sorted order of the registered functions container
requires that they are actually inserted in the expected sort order.
* Insert the registered functions into the container in case sensitive
position. As a result, only the complete_functions() routine needs to
search the entire container because it does a case insensitive search for
convenience.
Caught by the unit tests.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@381118 65c4cc65-6c06-0410-ace0-fbb531ad65f3
* Fixed "core show function" tab completion and token count checking.
* Refactored function and application container handling code to reduce
redundancy.
* Made __ast_pbx_run() return using the defines the caller should expect.
Doesn't change the returned values. Just made use the defines.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@381102 65c4cc65-6c06-0410-ace0-fbb531ad65f3
These two variables were previously not being set when comebacktoorigin=yes
and the example configs seemed to imply that they should be. Since there
is no harm in this and since calls that are sent back to origin are capable
of continuing in the dialplan, this seemed like a no-brainer. Also it
supports some bridging tests I've been working on.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@381068 65c4cc65-6c06-0410-ace0-fbb531ad65f3
A regression was introduced which removed automatic fallback behavior from
the PBX. This behavior was used by call parking (or at least documented as
how the feature works) in order to select an extension when the flat channel
extension wasn't available from the comebackcontext. Parking now handles
the fallbacks internally in order to keep behavior matching with how it is
documented.
(closes issue ASTERISK-20716)
Reported by: Chris Gentle
Review: https://reviewboard.asterisk.org/r/2296/
........
Merged revisions 380348 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@380349 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch came about due to a problem observed where wav files had an
empty header. The header is supposed to be updated in wav_close(). It
turns out that this was broken when the cache_record_files option from
asterisk.conf was enabled. The cleanup code was moving the file to its
final destination *before* running the close() method of the file
destructor, so the header didn't get updated.
Another problem here is that the move was being done before actually
closing the FILE *.
Finally, the last bug fixed here is that I noticed that wav_close()
checks for stream->filename to be non-NULL. In the previous cleanup
order, it's checking a pointer to freed memory. This doesn't actually
cause anything to break, but it's treading on dangerous waters. Now the
free() of stream->filename is happening after the format module's
close() method gets called, so it's safer.
Review: https://reviewboard.asterisk.org/r/2286/
........
Merged revisions 380210 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 380211 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@380212 65c4cc65-6c06-0410-ace0-fbb531ad65f3
* Made multiplexed_bridge_destroy() check if anything to destroy and
cleared bridge_pvt pointer after destruction.
* Made multiplexed_add_or_remove() handling of the chans array simpler.
* Extracted bridge_channel_poke().
* Simplified bridge_array_remove() handling of the bridge->array[]. The
array does not have a NULL sentinel pointer.
* Made ast_bridge_new() not create a temporary bridge just to see if it
can be done. Only need to check if there is an appropriate bridge tech
available.
* Made ast_bridge_new() clean up on allocation failures.
* Made destroy_bridge() free resources in the opposite order of creation.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@380109 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Sorcery is a unifying data access layer which provides a pluggable mechanism to allow
object creation, retrieval, updating, and deletion using different backends (or wizards).
This is a fancy way of saying "one interface to rule them all" where them is configuration,
realtime, and anything else that comes along.
Review: https://reviewboard.asterisk.org/r/2259/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@380069 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch adds the capability for asynchronous manipulation of audio being
played back to a channel though a new AMI action "ControlPlayback". The
ControlPlayback action supports a number of operations, the availability of
which depend on the application being used to send audio to the channel.
When the audio playback was initiated using the ControlPlayback application
or CONTROL STREAM FILE AGI command, the audio can be paused, stopped,
restarted, reversed, or skipped forward. When initiated by other mechanisms
(such as the Playback application), the audio can be stopped, reversed, or
skipped forward.
Review: https://reviewboard.asterisk.org/r/2265/
(closes issue ASTERISK-20882)
Reported by: mjordan
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@379830 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When r376428 was commited to re-order start up sequences to be more tolerant of
forking with thread primitives, a few items were changed that caused changes
in behavior on some distros. This includes:
* Not displaying the splash screen on a remote console.
* Displaying an error message on stderr when a remote console cannot connect
to a running instance of Asterisk.
In the first case, the splash screen was re-added (thanks to Michael L. Young).
In the second case, the various init.d scripts were modified to pipe stderr
to /dev/null, as the error message is useful - if you execute a remote
console or a remote console command execution and it fail, it should tell
you. Note that the error message was always present, it just failed to be
printed prior to r376428.
Much thanks to the folks who quickly reported this problem, provided solutions,
and promptly tested the various init.d scripts on a variety of distros.
(closes issue ASTERISK-20945)
Reported by: Warren Selby
Tested by: Michael L. Young, Jamuel Starkey, kaldemar, Danny Nicholas, mjordan
patches:
asterisk-20945-remote-intro-msg.diff uploaded by elguero (license 5026)
ASTERISK-20945-1.8-mjordan.diff uploaded by mjordan (license 6283)
........
Merged revisions 379760 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 379777 from http://svn.asterisk.org/svn/asterisk/branches/10
........
Merged revisions 379790 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@379791 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When Asterisk forks itself into the background via a call to daemon, it must
re-set the pid value of the new process. Otherwise, astcanary gets the pid
value of the process before the fork, which prevents it from running. Asterisk
eventually starts lowering its priority, as it can no longer communicate
with the proverbial canary in the coal mine.
This patch ensures that the correct process identifier is used by astcanary.
Note that this is getting committed to 10 as a regression fix.
(closes issue ASTERISK-20947)
Reported by: Jakob Hirsch
Tested by: mjordan
patches:
asterisk-10.12.0.astcanary_ppid.diff uploaded by Jakob Hirsch (license 6113)
........
Merged revisions 379509 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 379510 from http://svn.asterisk.org/svn/asterisk/branches/10
........
Merged revisions 379513 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@379518 65c4cc65-6c06-0410-ace0-fbb531ad65f3
* This allows us to remove some special-case build logic.
* 10.5 is down to less that 8% of the OS X market share. 10.4 is down to
under 2%.
* Apple is no longer releasing security updates for 10.5 and earlier.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@379495 65c4cc65-6c06-0410-ace0-fbb531ad65f3
* Add a max_size option for threadpools. Also added a test for this option.
* Fixed comments to be more accurate and have fewer typos.
* Updated copyright dates on new files.
git-svn-id: https://origsvn.digium.com/svn/asterisk/team/mmichelson/threadpool@379375 65c4cc65-6c06-0410-ace0-fbb531ad65f3
file:///srv/subversion/repos/asterisk/trunk
................
r379229 | mjordan | 2013-01-16 11:46:15 -0600 (Wed, 16 Jan 2013) | 10 lines
Let documentation reference links specify which module they're linking to
Again, since res_jabber/res_xmpp have duplicate APIs, their documentation ref
links have to specify which reference they're referring to. The various
documentation parsers can interpret the module attribute however they want
in order to construct the appropriate links.
........
Merged revisions 379228 from http://svn.asterisk.org/svn/asterisk/branches/11
................
r379231 | rmudgett | 2013-01-16 11:49:52 -0600 (Wed, 16 Jan 2013) | 10 lines
chan_misdn: Fix compile error.
(issue ASTERISK-15456)
........
Merged revisions 379226 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 379230 from http://svn.asterisk.org/svn/asterisk/branches/11
................
r379233 | rmudgett | 2013-01-16 12:09:28 -0600 (Wed, 16 Jan 2013) | 8 lines
Reduce call-id logging resource usage.
Since there is no need for the call-id logging ao2 object to have a lock,
don't create it with one.
........
Merged revisions 379232 from http://svn.asterisk.org/svn/asterisk/branches/11
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/team/mmichelson/threadpool@379243 65c4cc65-6c06-0410-ace0-fbb531ad65f3
* Clarify some documentation
* Change copyright date of taskprocessor files
* Address potential issue of creating taskprocessor with listener if
taskprocessor with that name exists already
git-svn-id: https://origsvn.digium.com/svn/asterisk/team/mmichelson/threadpool@379124 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Now user data is allocated by the creator of the taskprocessor
listener and that user data is passed into ast_taskprocessor_listener_alloc().
Similarly, freeing of the user data is left up to the user himself. He can
free the data when the taskprocessor shuts down, or he can choose to hold
onto it if it makes sense to do so.
This, unsurprisingly, makes threadpool allocation a LOT cleaner now.
git-svn-id: https://origsvn.digium.com/svn/asterisk/team/mmichelson/threadpool@379120 65c4cc65-6c06-0410-ace0-fbb531ad65f3
file:///srv/subversion/repos/asterisk/trunk
................
r379021 | dlee | 2013-01-14 09:29:22 -0600 (Mon, 14 Jan 2013) | 15 lines
Fix XML encoding of 'identity display' in NOTIFY messages, continued.
When r378933 was merged into 1.8, it should have also escaped
remote_display, since it will have the same XML encoding problem when
the caller/callee roles are reversed.
(closes issue ABE-2902)
Reported by: Guenther Kelleter
........
Merged revisions 379001 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 379020 from http://svn.asterisk.org/svn/asterisk/branches/11
................
r379023 | dlee | 2013-01-14 09:58:01 -0600 (Mon, 14 Jan 2013) | 20 lines
Masquerades are an insane implementation detail within Asterisk. It generates
a number of useless and confusing events, and manipulates channels in a way
that semantically doesn't make sense. I've given a fairly thorough review of
masquerade code and its usage on the wiki at
https://wiki.asterisk.org/wiki/x/IwBRAQ.
While ultimately it makes the most sense to abandon masquerades altogether,
it will take some time to completely irradicate. Even then, there may always
be code that's not worth rewriting to get rid of the masquerade.
This patch does two things to make masquerades slightly less insane:
* When swapping the names of the original and clone channel, only emit a
single rename event of original -> original<ZOMBIE>. The original code
issued three rename events to accomplish the same end.
* In addition to swapping the names of the channels, also swap their
uniqueid's. This allows the 'Uniqueid' field to be used as a stable
identifier for a channel from and external interface, such as AMI.
Review: https://reviewboard.asterisk.org/r/2266/
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/team/mmichelson/threadpool@379032 65c4cc65-6c06-0410-ace0-fbb531ad65f3
file:///srv/subversion/repos/asterisk/trunk
................
r378935 | dlee | 2013-01-12 00:43:37 -0600 (Sat, 12 Jan 2013) | 41 lines
Fix XML encoding of 'identity display' in NOTIFY messages.
XML encoding in chan_sip is accomplished by naively building the XML
directly from strings. While this usually works, it fails to take into
account escaping the reserved characters in XML.
This patch adds an 'ast_xml_escape' function, which works similarly to
'ast_uri_encode'. This is used to properly escape the local_display
attribute in XML formatted NOTIFY messages.
Several things to note:
* The Right Thing(TM) to do would probably be to replace the
ast_build_string stuff with building an ast_xml_doc. That's a much
bigger change, and out of scope for the original ticket, so I
refrained myself.
* It is with great sadness that I wrote my own ast_xml_escape
function. There's one in libxml2, but it's knee-deep in
libxml2-ness, and not easily used to one-off escape a
string.
* I only escaped the string we know is causing problems
(local_display). At least some of the other strings are
URI-encoded, which should be XML safe. Rather than figuring out
what's safe and escaping what's not, it would be much cleaner to
simply build an ast_xml_doc for the messages and let the XML
library do the XML escaping. Like I said, that's out of scope.
(closes issue ABE-2902)
Reported by: Guenther Kelleter
Tested by: Guenther Kelleter
Review: http://reviewboard.digium.internal/r/365/
........
Merged revision 378919 from https://origsvn.digium.com/svn/asterisk/be/branches/C.3-bier
........
Merged revisions 378933 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 378934 from http://svn.asterisk.org/svn/asterisk/branches/11
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/team/mmichelson/threadpool@378946 65c4cc65-6c06-0410-ace0-fbb531ad65f3
file:///srv/subversion/repos/asterisk/trunk
................
r378915 | dlee | 2013-01-11 16:31:42 -0600 (Fri, 11 Jan 2013) | 21 lines
Add JSON API for Asterisk.
This provides a JSON API by pulling in and wrapping the Jansson JSON
library[1]. The Asterisk API basically mirrors the Jansson
functionality, with a few minor tweaks.
* Some names have been asteriskified to protect the innocent.
* Jansson provides both reference-stealing and reference-borrowing
versions of several API's. The Asterisk API is exclusively
reference-stealing for operations that put elements into arrays and
objects.
* No support for doubles, since we usually don't need that.
* Coming along for the ride is the ast_test_validate macro, which made
the unit tests much easier to write.
[1]: http://www.digip.org/jansson/
(issue ASTERISK-20887)
(closes issue ASTERISK-20888)
Review: https://reviewboard.asterisk.org/r/2264/
................
r378918 | file | 2013-01-11 17:05:38 -0600 (Fri, 11 Jan 2013) | 11 lines
Retain XMPP filters across reconnections so external modules continue to function as expected.
Previously if an XMPP client reconnected any filters added by an external module were lost.
This issue exhibited itself with chan_motif not receiving and reacting to Jingle signaling.
(closes issue ASTERISK-20916)
Reported by: kuj
........
Merged revisions 378917 from http://svn.asterisk.org/svn/asterisk/branches/11
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/team/mmichelson/threadpool@378927 65c4cc65-6c06-0410-ace0-fbb531ad65f3
file:///srv/subversion/repos/asterisk/trunk
........
r378889 | rmudgett | 2013-01-09 20:40:50 -0600 (Wed, 09 Jan 2013) | 8 lines
* Simplify native bridge code in ast_channel_bridge().
* Fix an unbalanced manager_bridge_event(unlink) call if
AST_SOFTHANGUP_UNBRIDGE is set in ast_channel_bridge().
* Make ast_channel_bridge() use common cleanup code when leaving the
bridge.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/team/mmichelson/threadpool@378898 65c4cc65-6c06-0410-ace0-fbb531ad65f3
file:///srv/subversion/repos/asterisk/trunk
................
r378783 | dlee | 2013-01-09 14:30:33 -0600 (Wed, 09 Jan 2013) | 14 lines
Fix end condition in ast_rtp_lookup_mime_multiple2.
The erroneous end condition would never include the AST_RTP_CISCO_DTMF flag
in the debug output.
(closes issue ASTERISK-20772)
Reported by: Xavier Hienne
........
Merged revisions 378776 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 378780 from http://svn.asterisk.org/svn/asterisk/branches/11
................
r378789 | rmudgett | 2013-01-09 14:56:23 -0600 (Wed, 09 Jan 2013) | 4 lines
* Found some more places to use ast_channel_lock_both().
* Minor optimization in ast_rtp_instance_early_bridge().
................
r378790 | rmudgett | 2013-01-09 15:14:39 -0600 (Wed, 09 Jan 2013) | 4 lines
* Whitespace changes.
* Made ast_test_init() match its prototype.
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/team/mmichelson/threadpool@378801 65c4cc65-6c06-0410-ace0-fbb531ad65f3
* Remove extraneous whitespace
* Bump up debug levels of messages and add identifying info to messages.
* Account for potential failures of ao2_link()
* Add additional test and some more test data
* Add some comments in places where they could be useful
* Make threadpool listeners and their callbacks optional
git-svn-id: https://origsvn.digium.com/svn/asterisk/team/mmichelson/threadpool@378652 65c4cc65-6c06-0410-ace0-fbb531ad65f3
file:///srv/subversion/repos/asterisk/trunk
................
r378458 | rmudgett | 2013-01-03 12:47:29 -0600 (Thu, 03 Jan 2013) | 18 lines
chan_agent: Misc code cleanup.
* Fix off-nominal path resource cleanup in agent_request().
* Create agent_pvt_destroy() to eliminate inlined versions in many places.
* Pull invariant code out of loop in add_agent().
* Remove redundant module user references in login_exec().
* Remove unused struct agent_pvt logincallerid[] member.
........
Merged revisions 378456 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 378457 from http://svn.asterisk.org/svn/asterisk/branches/11
................
r378460 | kmoore | 2013-01-03 12:51:43 -0600 (Thu, 03 Jan 2013) | 13 lines
Add missing test event
This test event was missing from channel.c causing the dial_LS_options
test to fail intermittently because of a race condition where most code
paths emitted the test event but this one did not. The dial_LS_options
test should stop bouncing now.
........
Merged revisions 378455 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 378459 from http://svn.asterisk.org/svn/asterisk/branches/11
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/team/mmichelson/threadpool@378467 65c4cc65-6c06-0410-ace0-fbb531ad65f3
file:///srv/subversion/repos/asterisk/trunk
................
r378374 | rmudgett | 2013-01-02 15:23:16 -0600 (Wed, 02 Jan 2013) | 33 lines
Fix AMI redirect action with two channels failing to redirect both channels.
The AMI redirect action can fail to redirect two channels that are bridged
together. There is a race between the AMI thread redirecting the two
channels and the bridge thread noticing that a channel is hungup from the
redirects.
* Made the bridge wait for both channels to be redirected before exiting.
* Made the AMI redirect check that all required headers are present before
proceeding with the redirection.
* Made the AMI redirect require that any supplied ExtraChannel exist
before proceeding. Previously the code fell back to a single channel
redirect operation.
(closes issue ASTERISK-18975)
Reported by: Ben Klang
(closes issue ASTERISK-19948)
Reported by: Brent Dalgleish
Patches:
jira_asterisk_19948_v11.patch (license #5621) patch uploaded by rmudgett
Tested by: rmudgett, Thomas Sevestre, Deepak Lohani, Kayode
Review: https://reviewboard.asterisk.org/r/2243/
........
Merged revisions 378356 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 378358 from http://svn.asterisk.org/svn/asterisk/branches/11
................
r378377 | mjordan | 2013-01-02 16:10:32 -0600 (Wed, 02 Jan 2013) | 24 lines
Prevent crashes from occurring when reading from data sources with large values
When reading configuration data from an Asterisk .conf file or when pulling
data from an Asterisk RealTime backend, Asterisk was copying the data on the
stack for manipulation. Unfortunately, it is possible to read configuration
data or realtime data from some data source that provides a large blob of
characters. This could potentially cause a crash via a stack overflow.
This patch prevents large sets of data from being read from an ARA backend or
from an Asterisk conf file.
(issue ASTERISK-20658)
Reported by: wdoekes
Tested by: wdoekes, mmichelson
patches:
* issueA20658_dont_process_overlong_config_lines.patch uploaded by wdoekes (license 5674)
* issueA20658_func_realtime_limit.patch uploaded by wdoekes (license 5674)
........
Merged revisions 378375 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 378376 from http://svn.asterisk.org/svn/asterisk/branches/11
................
r378384 | mjordan | 2013-01-02 16:19:32 -0600 (Wed, 02 Jan 2013) | 11 lines
Clean up app_mysql's application entry points to properly parse arguments
When parsing arguments, application entry points should not attempt to
directly modify the parameters to the function. This patch properly duplicates
the passed in parameters before attempting to parse them.
(issue ASTERISK-20658)
Reported by: wdoekes
patches:
issueA20658_sanitize_app_mysql.patch uploaded by wdoekes (license 5674)
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/team/mmichelson/threadpool@378385 65c4cc65-6c06-0410-ace0-fbb531ad65f3
file:///srv/subversion/repos/asterisk/trunk
................
r378322 | mjordan | 2013-01-02 12:11:59 -0600 (Wed, 02 Jan 2013) | 33 lines
Prevent exhaustion of system resources through exploitation of event cache
Asterisk maintains an internal cache for devices in the event subsystem. The
device state cache holds the state of each device known to Asterisk, such that
consumers of device state information can query for the last known state for
a particular device, even if it is not part of an active call. The concept of
a device in Asterisk can include entities that do not have a physical
representation. One way that this occurred was when anonymous calls are allowed
in Asterisk. A device was automatically created and stored in the cache for
each anonymous call that occurred; this was possible in the SIP and IAX2
channel drivers and through channel drivers that utilized the
res_jabber/res_xmpp resource modules (Gtalk, Jingle, and Motif). These devices
are never removed from the system, allowing anonymous calls to potentially
exhaust a system's resources.
This patch changes the event cache subsystem and device state management to
no longer cache devices that are not associated with a physical entity.
(issue ASTERISK-20175)
Reported by: Russell Bryant, Leif Madsen, Joshua Colp
Tested by: kmoore
patches:
event-cachability-3.diff uploaded by jcolp (license 5000)
........
Merged revisions 378303 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 378320 from http://svn.asterisk.org/svn/asterisk/branches/10
........
Merged revisions 378321 from http://svn.asterisk.org/svn/asterisk/branches/11
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/team/mmichelson/threadpool@378329 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Richard Mudgett
Kinsey Moore
David M. Lee
Matthew Jordan
Joshua Colp
Mark Michelson
Jonathan Rose
Jason Parker
Kevin Harwell
Michael L. Young
Alec L Davis
Russell Bryant
Tzafrir Cohen
Walter Doekes
Automerge script