https://origsvn.digium.com/svn/asterisk/branches/10
................
r332101 | rmudgett | 2011-08-16 12:17:28 -0500 (Tue, 16 Aug 2011) | 140 lines
Merged revisions 332100 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r332100 | rmudgett | 2011-08-16 11:31:36 -0500 (Tue, 16 Aug 2011) | 133 lines
Fix multiple parking issues.
JIRA ASTERISK-17183
Multi-parkinglot directs calls to wrong parkinglot.
JIRA ASTERISK-17870
Cannot retrieve parked calls.
JIRA ASTERISK-17430
ParkedCall() with no extension should pickup first available call and does not.
JIRA AST-576
Issues with parking lots
* Removed searching for parking lots by extension. Parking lots can only
be found by the parking lot name since parking lot access extensions and
spaces are not guaranteed to be unique.
* Added parking_lot_name option to the Park and ParkedCall applications.
Updated documentation for Park and ParkedCall applications.
* Add parkext_exclusive configuration option to make parking entry
extensions specify which parking lot they access.
(closes issue ASTERISK-17183)
Reported by: David Cabrejos
Tested by: rmudgett, David Cabrejos
(closes issue ASTERISK-17870)
Reported by: Remi Quezada
(closes issue ASTERISK-17430)
Reported by: Philippe Lindheimer
JIRA ASTERISK-17452
Parking_offset not used
JIRA AST-624
'next' setting for findslot does nothing
* Reimplemented since findslot feature option broken by -r114655.
(closes issue ASTERISK-17452)
Reported by: David Woolley
Tested by: rmudgett
JIRA ASTERISK-15792
Dialplan continues execution after transfer to park.
This happens for DTMF attended transfer, DTMF blind transfer, and DTMF
one-touch-parking if the party initiating these features also initiated
the call.
* Fixed the return code from the affected builtin features when parking a
call.
(closes issue ASTERISK-15792)
Reported by: Mat Murdock
Tested by: rmudgett, twilson
JIRA AST-607
The courtesytone is not playing to the expected call when picking up a
parked call.
This is mostly a documentation problem. However, the option is not reset
to the default when features.conf is reloaded.
* Updated features.conf.sample documentation for courtesytone and
parkedplay options.
* Reset the parkedplay option to default when features.conf is reloaded.
JIRA AST-615
AMI Park action followed by features reload results in orphaned channels
in parking lot.
* Reloading features.conf will not touch parking lots that have calls
still parked in them. Reload again at a later time.
Misc additional fixes:
* Added unit test for parking lot dialplan usage checking.
* Made update connected line when a parked call is retrieved from a
parking lot.
* Made retrieved parked call stop ringing or MOH depending upon how the
call was waiting in the parking lot.
* Made CLI "features show" indicate if the parking lot is enabled for use.
* Added PARKINGDYNEXTEN channel variable to allow dynamic parking lots to
specify the parking lot access extension.
* Made AMI ParkedCalls action ParkedCall events have a Parkinglot header.
* Made AMI ParkedCalls action ParkedCallsComplete event have a Total
header.
* Fixed potential deadlock from AMI Park action holding channel locks
while calling masq_park_call().
* Fixed several places where ast_strdupa() were used inside of loops.
(Mostly fixed by refactoring the loop body into its own function.)
* Fixed copy_parkinglot() copying too much from the source parking lot.
Extracted the parking lot configuration settings into struct
parkinglot_cfg.
* Refactored courtesytone playing code to put the channel not playing the
tone in autoservice.
* Fix when pbx-parkingfailed is played that the other channel is put in
autoservice if it exists.
* Fixed parkinglot reference leak in parked_call_exec() error paths.
* Fixed parkinglot_unref() use of parkinglot after it was unreffed.
* Made destroy the struct ast_parkinglot parkings lock when done.
* Refactored the features.conf parking lot configuration code to eliminate
redundancy.
* Fixed feature reload to better protect parking lots.
* Fixed parking lot container reference leak in handle_parkedcalls().
* Fixed the total count in handle_parkedcalls().
Review: https://reviewboard.asterisk.org/r/1358/
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@332117 65c4cc65-6c06-0410-ace0-fbb531ad65f3
There were some bugs in the very ancient version of Berkeley DB that Asterisk
used. Instead of spending the time tracking down the bugs in the Berkeley code
we move to the much better documented SQLite 3.
Conversion of the old astdb happens at runtime by running the included
astdb2sqlite3 utility. The ast_db API with SQLite 3 backend should behave
identically to the old Berkeley backend, but in the future we could offer a
much more robust interface.
We do not include the SQLite 3 library in the source tree, but instead rely
upon the distribution-provided libraries. SQLite is so ubiquitous that this
should not place undue burden on administrators.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@326589 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r324955 | tilghman | 2011-06-27 11:30:50 -0500 (Mon, 27 Jun 2011) | 5 lines
Save and restore errno from within signal handlers.
This is recommended by the POSIX standard, as well as by the sigaction(2) manpage
for various platforms that we support (e.g. Mac OS X).
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@324961 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Asterisk now has protocol independent support for processing text messages
outside of a call. Messages are routed through the Asterisk dialplan.
SIP MESSAGE and XMPP are currently supported. There are options in sip.conf
and jabber.conf that enable these features.
There is a new application, MessageSend(). There are two new functions,
MESSAGE() and MESSAGE_DATA(). Documentation will be available on
the project wiki, wiki.asterisk.org.
Thanks to Terry Wilson for the assistance with development and to David Vossel
for helping with some additional testing.
Review: https://reviewboard.asterisk.org/r/1042/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@321546 65c4cc65-6c06-0410-ace0-fbb531ad65f3
I excluded the part of this patch that used the HOME environment variable since
the built-in editline library goes to great lengths to disallow that. Instead
only settings the EDITRC environment variable will use a user specified file.
Also, the default environment variable use to determine the edit more is
AST_EDITMODE instead of AST_EDITOR (although the latter is still supported).
(closes issue #15929)
Reported by: kkm
Patches:
astcli-editrc-v2.diff uploaded by kkm (license 888)
015929-astcli-editrc-trunk.240324.diff uploaded by kkm (license 888)
Tested by: seanbright
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@317395 65c4cc65-6c06-0410-ace0-fbb531ad65f3
-Functional changes
1. Dynamic global format list build by codecs defined in codecs.conf
2. SILK 8khz, 12khz, 16khz, and 24khz with custom attributes defined in codecs.conf
3. Negotiation of SILK attributes in chan_sip.
4. SPEEX 32khz with translation
5. SLINEAR 8khz, 12khz, 24khz, 32khz, 44.1khz, 48khz, 96khz, 192khz with translation
using codec_resample.c
6. Various changes to RTP code required to properly handle the dynamic format list
and formats with attributes.
7. ConfBridge now dynamically jumps to the best possible sample rate. This allows
for conferences to take advantage of HD audio (Which sounds awesome)
8. Audiohooks are no longer limited to 8khz audio, and most effects have been
updated to take advantage of this such as Volume, DENOISE, PITCH_SHIFT.
9. codec_resample now uses its own code rather than depending on libresample.
-Organizational changes
Global format list is moved from frame.c to format.c
Various format specific functions moved from frame.c to format.c
Review: https://reviewboard.asterisk.org/r/1104/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@308582 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
................
r307536 | qwell | 2011-02-10 16:39:30 -0600 (Thu, 10 Feb 2011) | 22 lines
Merged revisions 307535 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
................
r307535 | qwell | 2011-02-10 16:35:49 -0600 (Thu, 10 Feb 2011) | 15 lines
Merged revisions 307534 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r307534 | qwell | 2011-02-10 16:33:09 -0600 (Thu, 10 Feb 2011) | 8 lines
Remove color when executing commands via a remote console.
Essentially this makes '-x' imply '-n' on rasterisk. This was done in a
different and incomplete way previously, which I'm reverting here.
(issue #18776)
Reported by: alecdavis
........
................
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@307537 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch is the foundation of an entire new way of looking at media in Asterisk.
The code present in this patch is everything required to complete phase1 of my
Media Architecture proposal. For more information about this project visit the link below.
https://wiki.asterisk.org/wiki/display/AST/Media+Architecture+Proposal
The primary function of this patch is to convert all the usages of format
bitfields in Asterisk to use the new format and format_cap APIs. Functionally
no change in behavior should be present in this patch. Thanks to twilson
and russell for all the time they spent reviewing these changes.
Review: https://reviewboard.asterisk.org/r/1083/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@306010 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Already had the pthread ID which is not the same. The most obvious enhancement
is in the "core show threads" output. As stated in the utils header, if the
platform isn't supported -1 is reported (instead of the process ID previously).
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@298137 65c4cc65-6c06-0410-ace0-fbb531ad65f3
by splitting up devices from hints into an own ao2_container the callback to
get these devices for statechange handling is faster.
with this changes the length of a device used in a hint isnt longer restricted
to 80 characters.
Tests showed that calling handle_statechange is 40 times faster if no hints
are used and 25 times faster if there are any hints.
(closes issue #17928)
Reported by: mdu113
Tested by: schmidts
Review: https://reviewboard.asterisk.org/r/1003/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@296752 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
................
r296534 | tilghman | 2010-11-29 01:28:44 -0600 (Mon, 29 Nov 2010) | 20 lines
Merged revisions 296533 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
........
r296533 | tilghman | 2010-11-29 01:27:09 -0600 (Mon, 29 Nov 2010) | 13 lines
I love standards. There are so many to choose from. Except when there isn't one.
Linux and *BSD disagree on the elements within the ucred structure. Detect
which one is in use on the system.
(closes issue #18384)
Reported by: bjm
Patches:
cred-diffs uploaded by bjm (license 473)
20101127__issue18384__1.6.2.diff.txt uploaded by tilghman (license 14)
20101127__issue18384__1.8.diff.txt uploaded by tilghman (license 14)
Tested by: tilghman, bjm
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@296535 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
................
r290864 | jpeeler | 2010-10-07 21:56:24 -0500 (Thu, 07 Oct 2010) | 23 lines
Merged revisions 290863 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
................
r290863 | jpeeler | 2010-10-07 21:45:44 -0500 (Thu, 07 Oct 2010) | 16 lines
Merged revisions 290862 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r290862 | jpeeler | 2010-10-07 21:35:29 -0500 (Thu, 07 Oct 2010) | 9 lines
Ensure editline cleanup occurs when Ctrl-C is pressed at control console.
A recent change was made to avoid a race condition on shutdown which only called
the end functions from the console thread. However, when pressing Ctrl-C the
quit handler is called from the signal handler thread.
(closes issue #17698)
Reported by: jmls
........
................
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@290865 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
................
r288341 | russell | 2010-09-22 11:45:18 -0500 (Wed, 22 Sep 2010) | 25 lines
Merged revisions 288340 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
................
r288340 | russell | 2010-09-22 11:44:13 -0500 (Wed, 22 Sep 2010) | 18 lines
Merged revisions 288339 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r288339 | russell | 2010-09-22 11:39:16 -0500 (Wed, 22 Sep 2010) | 11 lines
Fix a 100% CPU consumption problem when setting console=yes in asterisk.conf.
The handling of -c and console=yes should be the same, but they were not.
When you specify -c, it sets both a flag for console module and for asterisk
not to fork() off into the background. The handling of console=yes only set
console mode, so you would end up with a background process() trying to run
the Asterisk console and freaking out since it didn't have anything to read
input from.
Thanks to beagles for reporting and helping debug the problem!
........
................
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@288342 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Asterisk Generic AOC Representation
- Generic AOC encode/decode routines.
(Generic AOC must be encoded to be passed on the wire in the AST_CONTROL_AOC frame)
- AST_CONTROL_AOC frame type to represent generic encoded AOC data
- Manager events for AOC-S, AOC-D, and AOC-E messages
Asterisk App Support
- app_dial AOC-S pass-through support on call setup
- app_queue AOC-S pass-through support on call setup
AOC Unit Tests
- AOC Unit Tests for encode/decode routines
- AOC Unit Test for manager event representation.
SIP AOC Support
- Pass-through of generic AOC-D and AOC-E messages to snom phones via the
snom AOC specification.
- Creation of chan_sip page3 flags for the addition of the new
'snom_aoc_enabled' sip.conf option.
IAX AOC Support
- Natively supports AOC pass-through through the use of the new
AST_CONTROL_AOC frame type
DAHDI AOC Support
- ETSI PRI full AOC Pass-through support
- 'aoc_enable' chan_dahdi.conf option for independently enabling
pass-through of AOC-S, AOC-D, AOC-E.
- 'aoce_delayhangup' option for retrieving AOC-E on disconnect.
- DAHDI A() dial string option for requesting AOC services.
example usage:
;requests AOC-S, AOC-D, and AOC-E on call setup
exten=>1111,1,Dial(DAHDI/g1/1112/A(s,d,e))
Review: https://reviewboard.asterisk.org/r/552/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@267096 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r266585 | tilghman | 2010-06-01 10:17:46 -0500 (Tue, 01 Jun 2010) | 11 lines
Prevent CLI prompt from distorting output of lines shorter than the prompt.
Uses the VT100 method of clearing the line from the cursor position to the
end of the line: Esc-0K
(closes issue #17160)
Reported by: coolmig
Patches:
20100531__issue17160.diff.txt uploaded by tilghman (license 14)
Tested by: coolmig
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@266592 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r266142 | tilghman | 2010-05-26 16:11:44 -0500 (Wed, 26 May 2010) | 14 lines
Use sigaction for signals which should persist past the initial trigger, not signal.
If you call signal() in a Solaris signal handler, instead of just resetting
the signal handler, it causes the signal to refire, because the signal is not
marked as handled prior to the signal handler being called. This effectively
causes Solaris to immediately exceed the threadstack in recursive signal
handlers and crash.
(closes issue #17000)
Reported by: rmcgilvr
Patches:
20100526__issue17000.diff.txt uploaded by tilghman (license 14)
Tested by: rmcgilvr
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@266146 65c4cc65-6c06-0410-ace0-fbb531ad65f3
From reviewboard:
The problem here is a bit complex, so try to bear with me...
It was noticed by a Digium customer that generic PLC (as configured in
codecs.conf) did not appear to actually be having any sort of benefit when
packet loss was introduced on an RTP stream. I reproduced this issue myself
by streaming a file across an RTP stream and dropping approx. 5% of the
RTP packets. I saw no real difference between when PLC was enabled or disabled
when using wireshark to analyze the RTP streams.
After analyzing what was going on, it became clear that one of the problems
faced was that when running my tests, the translation paths were being set
up in such a way that PLC could not possibly work as expected. To illustrate,
if packets are lost on channel A's read stream, then we expect that PLC will
be applied to channel B's write stream. The problem is that generic PLC can
only be done when there is a translation path that moves from some codec to
SLINEAR. When I would run my tests, I found that every single time, read
and write translation paths would be set up on channel A instead of channel
B. There appeared to be no real way to predict which channel the translation
paths would be set up on.
This is where Kevin swooped in to let me know about the transcode_via_sln
option in asterisk.conf. It is supposed to work by placing a read translation
path on both channels from the channel's rawreadformat to SLINEAR. It also
will place a write translation path on both channels from SLINEAR to the
channel's rawwriteformat. Using this option allows one to predictably set up
translation paths on all channels. There are two problems with this, though.
First and foremost, the transcode_via_sln option did not appear to be working
properly when I was placing a SIP call between two endpoints which did not
share any common formats. Second, even if this option were to work, for PLC
to be applied, there had to be a write translation path that would go from
some format to SLINEAR. It would not work properly if the starting format
of translation was SLINEAR.
The one-line change presented in this review request in chan_sip.c fixed the
first issue for me. The problem was that in sip_request_call, the
jointcapability of the outbound channel was being set to the format passed to
sip_request_call. This is nativeformats of the inbound channel. Because of this,
when ast_channel_make_compatible was called by app_dial, both channels already
had compatibly read and write formats. Thus, no translation path was set up at
the time. My change is to set the jointcapability of the sip_pvt created during
sip_request_call to the intersection of the inbound channel's nativeformats and
the configured peer capability that we determined during the earlier call to
create_addr. Doing this got the translation paths set up as expected when using
transcode_via_sln.
The changes presented in channel.c fixed the second issue for me. First and
foremost, when Asterisk is started, we'll read codecs.conf to see the value of
the genericplc option. If this option is set, and ast_write is called for a
frame with no data, then we will attempt to fill in the missing samples for
the frame. The implementation uses a channel datastore for maintaining the
PLC state and for creating a buffer to store PLC samples in. Even when we
receive a frame with data, we'll call plc_rx so that the PLC state will have
knowledge of the previous voice frame, which it can use as a basis for when
it comes time to actually do a PLC fill-in.
So, reviewers, now I ask for your help. First off, there's the one line change
in chan_sip that I have put in. Is it right? By my logic it seems correct, but
I'm sure someone can tell me why it is not going to work. This is probably the
change I'm least concerned about, though. What concerns me much more is the
set of changes in channel.c. First off, am I even doing it right? When I run
tests, I can clearly see that when PLC is activated, I see a significant increase
in RTP traffic where I would expect it to be. However, in my humble opinion, the
audio sounds kind of crappy whenever the PLC fill-in is done. It sounds worse to
me than when no PLC is used at all. I need someone to review the logic I have used
to be sure that I'm not misusing anything. As far as I can see my pointer arithmetic
is correct, and my use of AST_FRIENDLY_OFFSET should be correct as well, but I'm
sure someone can point out somewhere where I've done something incorrectly.
As I was writing this review request up, I decided to give the code a test run under
valgrind, and I find that for some reason, calls to plc_rx are causing some invalid
reads. Apparently I'm reading past the end of a buffer somehow. I'll have to dig around
a bit to see why that is the case. If it's obvious to someone reviewing, speak up!
Finally, I have one other proposal that is not reflected in my code review. Since
without transcode_via_sln set, one cannot predict or control where a translation
path will be up, it seems to me that the current practice of using PLC only when
transcoding to SLINEAR is not useful. I recommend that once it has been determined
that the method used in this code review is correct and works as expected, then
the code in translate.c that invokes PLC should be removed.
Review: https://reviewboard.asterisk.org/r/622/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@264452 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This module implements an abstraction for retrieving and exporting
asterisk data.
Developed by:
Brett Bryant <brettbryant@gmail.com>
Eliel C. Sardanons (LU1ALY) <eliels@gmail.com>
For the Google Summer of code 2009 Project.
Documentation can be found in doxygen format and inside the
header include/asterisk/data.h
Review: https://reviewboard.asterisk.org/r/275/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@258517 65c4cc65-6c06-0410-ace0-fbb531ad65f3
From Reviewboard:
CCSS stands for Call Completion Supplementary Services. An admittedly out-of-date
overview of the architecture can be found in the file doc/CCSS_architecture.pdf
in the CCSS branch. Off the top of my head, the big differences between what is
implemented and what is in the document are as follows:
1. We did not end up modifying the Hangup application at all.
2. The document states that a single call completion monitor may be used across
multiple calls to the same device. This proved to not be such a good idea
when implementing protocol-specific monitors, and so we ended up using one
monitor per-device per-call.
3. There are some configuration options which were conceived after the document
was written. These are documented in the ccss.conf.sample that is on this
review request.
For some basic understanding of terminology used throughout this code, see the
ccss.tex document that is on this review.
This implements CCBS and CCNR in several flavors.
First up is a "generic" implementation, which can work over any channel technology
provided that the channel technology can accurately report device state. Call
completion is requested using the dialplan application CallCompletionRequest and can
be canceled using CallCompletionCancel. Device state subscriptions are used in order
to monitor the state of called parties.
Next, there is a SIP-specific implementation of call completion. This method uses the
methods outlined in draft-ietf-bliss-call-completion-06 to implement call completion
using SIP signaling. There are a few things to note here:
* The agent/monitor terminology used throughout Asterisk sometimes is the reverse of
what is defined in the referenced draft.
* Implementation of the draft required support for SIP PUBLISH. I attempted to write
this in a generic-enough fashion such that if someone were to want to write PUBLISH
support for other event packages, such as dialog-state or presence, most of the effort
would be in writing callbacks specific to the event package.
* A subportion of supporting PUBLISH reception was that we had to implement a PIDF
parser. The PIDF support added is a bit minimal. I first wrote a validation
routine to ensure that the PIDF document is formatted properly. The rest of the
PIDF reading is done in-line in the call-completion-specific PUBLISH-handling
code. In other words, while there is PIDF support here, it is not in any state
where it could easily be applied to other event packages as is.
Finally, there are a variety of ISDN-related call completion protocols supported. These
were written by Richard Mudgett, and as such I can't really say much about their
implementation. There are notes in the CHANGES file that indicate the ISDN protocols
over which call completion is supported.
Review: https://reviewboard.asterisk.org/r/523
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@256528 65c4cc65-6c06-0410-ace0-fbb531ad65f3
We can have bad results when a module, upon being loaded, attempts
to reference the channels container if the container hasn't yet
been initialized. I saw this happen by trying to preload pbx_config.so
and having a hint defined which referenced a non-existent SIP peer.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@253872 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r248859 | tilghman | 2010-02-25 15:21:05 -0600 (Thu, 25 Feb 2010) | 15 lines
Some platforms clear /var/run at boot, which makes connecting a remote console... difficult.
Previously, we only created the default /var/run/asterisk directory at install
time. While we could create it in the init script, that would not work for
those who start asterisk manually from the command line. So the safest thing
to do is to create it as part of the Asterisk boot process. This also changes
the ownership of the directory, because the pid and ctl files are created after
we setuid/setgid.
(closes issue #16802)
Reported by: Brian
Patches:
20100224__issue16802.diff.txt uploaded by tilghman (license 14)
Tested by: tzafrir
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@248861 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Terry Wilson
Tilghman Lesher
Tzafrir Cohen
Richard Mudgett
Mark Murawki
Jonathan Rose
Russell Bryant
Sean Bright
David Vossel
Jason Parker
Jeff Peeler
Stefan Schmidt
Mark Michelson
Eliel C. Sardanons