This patch adds pass-through support for CELT. CELT
formats are defined in codecs.conf and can be configured
to any sample rate a CELT endpoint supports. This patch also
addresses a crash in channel.c resulting from a frame list being
freed incorrectly. This crash was discovered while testing a CELT
translator which had to split encoded audio into multiple frames.
The codec translator is not a part of this patch, but may be
contributed in the future.
Review: https://reviewboard.asterisk.org/r/1294/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@326855 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r326689 | jrose | 2011-07-07 11:04:51 -0500 (Thu, 07 Jul 2011) | 10 lines
res_odbc patch by tilghman to fix integers with null values
Addresses some improper sql statements in res_odbc that would cause an update to fail on
realtime peers due to trying to set as "(NULL)" rather than an actual NULL.
(closes issue #1922STERISK-17791)
Reported by: marcelloceschia
Patches:
20110505__issue19223.diff.txt uploaded by tilghman (license 14)
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@326694 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r326484 | dvossel | 2011-07-06 10:26:49 -0500 (Wed, 06 Jul 2011) | 10 lines
Reverts fix for timerfd locking issue.
jrose discovered a performance issue with this
fix that prevents his analog phones from working
when using timerfd as a timing source. Until
it is understood what is causing this performance
problem, this patch is being reverted.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@326485 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r326411 | tilghman | 2011-07-05 17:08:29 -0500 (Tue, 05 Jul 2011) | 14 lines
Add the attribute "type" to each "<use>" for menuselect.
This matters only when autoconf fails to detect that weak linking is supported.
External optional dependencies will become optional in both cases, as they are
removed at compile time when not detected. However, runtime-optional modules
are made mandatory when weak linking is not found. This change affects only
the external optional dependencies; previously, they were incorrectly required
when weak linking support was not detected.
Patches:
20110702__issue18062__asterisk_trunk.diff.txt by tilghman (License #5003)
Tested by: iasgoscouk
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@326412 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r325821 | jrose | 2011-06-30 14:17:32 -0500 (Thu, 30 Jun 2011) | 10 lines
Fixes an issue with Music on Hold classes losing files in playlist when realtime is used.
The bug occurs rather intermittently and I relied on the reporters to test the patch.
After a sanity check and some testing, I'm giving it an OK.
(closes issue ASTERISK-17875)
Reported by: David Cunningham
Patches:
res_musiconhold.c.mohrt17875_v1 uploaded by Igor Goncharovsky (license #5009)
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@325864 65c4cc65-6c06-0410-ace0-fbb531ad65f3
terminal). Can be enabled on a channel by setting FAXOPT(gateway)=yes in the
dialplan.
Big thanks to irroot for porting this code to use the framehooks api.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@325816 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Asterisk now has protocol independent support for processing text messages
outside of a call. Messages are routed through the Asterisk dialplan.
SIP MESSAGE and XMPP are currently supported. There are options in sip.conf
and jabber.conf that enable these features.
There is a new application, MessageSend(). There are two new functions,
MESSAGE() and MESSAGE_DATA(). Documentation will be available on
the project wiki, wiki.asterisk.org.
Thanks to Terry Wilson for the assistance with development and to David Vossel
for helping with some additional testing.
Review: https://reviewboard.asterisk.org/r/1042/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@321546 65c4cc65-6c06-0410-ace0-fbb531ad65f3
state of the channel reverts to unknown this should be rejected.
this is important for negotiating T.38 gateway see #13405
This patch adds a option T38_REJECTED that behaves as T38_DISABLED except it reports state rejected.
Trivial Change to res_fax to honnor UNAVAILABLE and REJECTED states.
(closes issue #18889)
Reported by: irroot
Tested by: irroot, darkbasic, mnicholson
Review: https://reviewboard.asterisk.org/r/1115
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@319087 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r318919 | bbryant | 2011-05-13 14:04:50 -0400 (Fri, 13 May 2011) | 10 lines
This patch fixes an issue with SRTP which makes HOLD/UNHOLD impossible when too
much time has passed between sending audio.
(closes issue #18206)
Reported by: bernhardsi
Patches:
res_srtp_unhold.patch uploaded by bernhards (license 1138)
Tested by: bernhards, notthematrix
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@318920 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r318351 | rmudgett | 2011-05-09 18:15:32 -0500 (Mon, 09 May 2011) | 6 lines
Remove references to res_features and its export file.
The contents of res/res_features.c was moved to into main/features.c
awhile ago. There is no longer any need for the res/Makefile to reference
res_features or the res_features linker exports file to exist.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@318352 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
................
r314780 | russell | 2011-04-22 09:02:23 -0500 (Fri, 22 Apr 2011) | 18 lines
Merged revisions 314778 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
........
r314778 | russell | 2011-04-22 08:58:03 -0500 (Fri, 22 Apr 2011) | 11 lines
Initialize buffers in getvar and getvarfull.
Initialize the buffers used to hold the result from GET VARIABLE or
GET VARIABLE FULL. The bug report shows func_read returning garbage in
the result. It assumed that the buffer passed in was initialized, like many
other functions do. In the more common code path (through the dialplan), it
is initialized, so just initialize it here too.
(closes issue #19050)
Reported by: johnz
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@314781 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r314069 | rmudgett | 2011-04-18 11:10:10 -0500 (Mon, 18 Apr 2011) | 22 lines
The AsyncAGI command loop is lax in the value it returns for the return status.
* Return correct status: SUCCESS/FAILED/HANGUP. Previously, abnormal
exits from the command loop such as hangup would return SUCCESS.
* The "asyncagi break" command now returns SUCCESS and is now the only way
to break the command loop with that status. Previously, it returned
FAILED.
* The AMI event AsyncAGI End is no longer sent if the AsyncAGI Start event
is not sent. Previously, this happened because of an error setting up the
AGI pipes.
* All executed AGI commands now get an AsyncAGI Exec result event.
Previously, if the command returned failure (because of hangup), the
command loop just exited with FAILURE and did not send the AsyncAGI Exec
result event.
* Makes sure that the channel frame queue is empty on hangup.
Review: https://reviewboard.asterisk.org/r/1183/
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@314080 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This fixes a regression in the media architecture change
where video frames did not have their video mark set
correctly. dvossel wrote this. twilson kindly committed
this, mmichelson found the bug.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@313822 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r313700 | rmudgett | 2011-04-13 17:52:47 -0500 (Wed, 13 Apr 2011) | 5 lines
Revert flushing stale AsyncAGI commands from -r313615.
It looks like it was intentional to leave any commands or in-flight
commands in the queue in case Async AGI is run again on the call.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@313701 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
................
r313588 | rmudgett | 2011-04-13 11:31:50 -0500 (Wed, 13 Apr 2011) | 55 lines
Merged revisions 313579 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
................
r313579 | rmudgett | 2011-04-13 11:29:49 -0500 (Wed, 13 Apr 2011) | 48 lines
Merged revisions 313545 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r313545 | rmudgett | 2011-04-13 11:21:24 -0500 (Wed, 13 Apr 2011) | 41 lines
Asterisk does not hangup a channel after endpoint hangs up.
If the call that the dialplan started an AGI script for is hungup while
the AGI script is in the middle of a command then the AGI script is not
notified of the hangup. There are many AGI Exec commands that this can
happen with. The reported applications have been: Background, Wait, Read,
and Dial. Also the AGI Get Data command.
* Don't wait on the Asterisk channel after it has hung up. The channel is
likely to never need servicing again.
* Restored the AGI script's ability to return the AGI_RESULT_HANGUP value
in run_agi(). It previously only could return AGI_RESULT_SUCCESS or
AGI_RESULT_FAILURE after the DeadAGI and AGI applications were merged.
(closes issue #17954)
Reported by: mn3250
Patches:
issue17954_v1.8.patch uploaded by rmudgett (license 664)
issue17954_v1.6.2.patch uploaded by rmudgett (license 664)
issue17954_v1.4.patch uploaded by rmudgett (license 664)
Tested by: rmudgett
JIRA SWP-2171
(closes issue #18492)
Reported by: devmod
Tested by: rmudgett
JIRA SWP-2761
(closes issue #18935)
Reported by: nvitaly
Tested by: astmiv, rmudgett
JIRA SWP-3216
(closes issue #17393)
Reported by: siby
Tested by: rmudgett
JIRA SWP-2727
Review: https://reviewboard.asterisk.org/r/1165/
........
................
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@313606 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r311352 | jrose | 2011-03-18 11:19:05 -0500 (Fri, 18 Mar 2011) | 10 lines
Changes some print statements/events to use a blank string in place of NULL if the string in question is NULL.
This is supposed to improve Solaris compatibility since Solaris goes berserk when trying to output NULL strings.
(closes issue #18759)
Reported by: bklang
Patches:
null-strings.patch uploaded by bklang (license 919)
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@311373 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r310240 | twilson | 2011-03-10 10:05:45 -0600 (Thu, 10 Mar 2011) | 13 lines
Add \r\n to remaining http headers passed to ast_http_send
r309204 changed the behavior of ast_http_send. It now requires headers
to be passed with trailing \r\n. This change updates the remaining
instances in the code that did not pass the \r\n.
(closes issue #18186)
Reported by: nivaldomjunior
Patches:
res_phoneprov.c.diff uploaded by lathama (license 1028)
manager.diff.txt uploaded by twilson (license 396)
Tested by: lathama
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@310241 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Adding the setvar option with variable substitution on the value allows things
like setting the outbound caller id name to the summary of a calendar event,
etc. Values could be chained together as they are appended in order to do some
scripting if necessary.
Review: https://reviewboard.asterisk.org/r/1134/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@309640 65c4cc65-6c06-0410-ace0-fbb531ad65f3
-Functional changes
1. Dynamic global format list build by codecs defined in codecs.conf
2. SILK 8khz, 12khz, 16khz, and 24khz with custom attributes defined in codecs.conf
3. Negotiation of SILK attributes in chan_sip.
4. SPEEX 32khz with translation
5. SLINEAR 8khz, 12khz, 24khz, 32khz, 44.1khz, 48khz, 96khz, 192khz with translation
using codec_resample.c
6. Various changes to RTP code required to properly handle the dynamic format list
and formats with attributes.
7. ConfBridge now dynamically jumps to the best possible sample rate. This allows
for conferences to take advantage of HD audio (Which sounds awesome)
8. Audiohooks are no longer limited to 8khz audio, and most effects have been
updated to take advantage of this such as Volume, DENOISE, PITCH_SHIFT.
9. codec_resample now uses its own code rather than depending on libresample.
-Organizational changes
Global format list is moved from frame.c to format.c
Various format specific functions moved from frame.c to format.c
Review: https://reviewboard.asterisk.org/r/1104/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@308582 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch is the foundation of an entire new way of looking at media in Asterisk.
The code present in this patch is everything required to complete phase1 of my
Media Architecture proposal. For more information about this project visit the link below.
https://wiki.asterisk.org/wiki/display/AST/Media+Architecture+Proposal
The primary function of this patch is to convert all the usages of format
bitfields in Asterisk to use the new format and format_cap APIs. Functionally
no change in behavior should be present in this patch. Thanks to twilson
and russell for all the time they spent reviewing these changes.
Review: https://reviewboard.asterisk.org/r/1083/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@306010 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Add and extend the see-also sections to the documentation for applications
and functions in an effort to expand the online documentation of the wiki.
Also check for and update any links to moved documentation in the doc folder.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@304913 65c4cc65-6c06-0410-ace0-fbb531ad65f3
table name, because of the use of an uninitialized variable. Fixes an error
introduced in r300882.
(closes issue #18605)
Reported by: romain_proformatique
Patches:
res_config_pgsql_fix.patch uploaded by romain proformatique (license 975)
Tested by: romain_proformatique
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@304600 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Skipping the call to set_t38_fax_caps() caused the FAX session
details to not be marked as supporting audio FAX either... the
function's name is a bit misleading. This patch restores the
single bit of non-T.38 behavior from that function when audio
mode is forced.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@304599 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The recently added option to disable usage of T.38 for a single
session should have been named 'F' for 'force audio', since that
is really what the user is asking to happen (and it's a positive
option instead of a negative option that way).
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@304422 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Sometimes during troubleshooting it can be useful to disable T.38 usage in order
to narrow down a problem. This patch adds an 'n' option to SendFAX and ReceiveFAX
so that can be done without having to disable T.38 usage entirely for the peer
that Asterisk is communicating with.
(inspired by trying to assist Bryant Zimmerman on asterisk-users)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@304342 65c4cc65-6c06-0410-ace0-fbb531ad65f3
For each component, the set of valid BNF expansions defines exactly
which characters may appear unescaped. All other characters MUST be
escaped.
This patch modifies ast_uri_encode() to encode strings in line with this recommendation. This patch also adds an ast_escape_quoted() function which escapes '"' and '\' characters in quoted strings in accordance with section 25.1 of RFC 3261. The ast_uri_encode() function has also been modified to take an ast_flags struct describing the set of rules it should use when escaping characters to allow for it to escape SIP URIs in addition to HTTP URIs and other types of URIs or variations of those two URI types in the future.
The ast_uri_decode() function has also been modified to accept an ast_flags struct describing the set of rules to use when decoding to enable decoding '+' as ' ' in legacy http URLs.
The unit tests for these functions have also been updated.
ABE-2705
Review: https://reviewboard.asterisk.org/r/1081/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@303509 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
................
r302549 | seanbright | 2011-01-19 13:43:11 -0500 (Wed, 19 Jan 2011) | 17 lines
Merged revisions 302548 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
........
r302548 | seanbright | 2011-01-19 13:37:09 -0500 (Wed, 19 Jan 2011) | 10 lines
Properly handle partial reads from fgets() when handling AGIs.
When fgets() failed with EAGAIN, we were continually decrementing the available
space left in our buffer, resulting in botched command handling.
(closes issue #16032)
Reported by: notahat
Patches:
agi_buffer_patch2.diff uploaded by fnordian (license 110)
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@302550 65c4cc65-6c06-0410-ace0-fbb531ad65f3
If your postgres connection died suddenly in between res_config_pgsql
queries, the next query will fail because the query is executed on a
disconnected/disconnecting handle. The query is abandoned and is
returned from in error.
Now we will reconnect and try again if a query was run on a
disconnected connection.
(closes issue #18071)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@300882 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
................
r299449 | tilghman | 2010-12-22 14:05:02 -0600 (Wed, 22 Dec 2010) | 15 lines
Merged revisions 299448 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
........
r299448 | tilghman | 2010-12-22 14:03:30 -0600 (Wed, 22 Dec 2010) | 8 lines
Resolve warnings by disambiguating the "s" extension as used by chan_dahdi from the "s" extension as used by the AEL macros.
(closes issue #18480)
Reported by: nivek
Patches:
20101215__issue18480__2.diff.txt uploaded by tilghman (license 14)
Tested by: nivek
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@299450 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Previously, I had added the ast_sched_thread stuff that was a generic scheduler
thread implementation. However, if you used it, it required using different
functions for modifying scheduler contents. This patch reworks how this is
done and just allows you to optionally start a thread on the original scheduler
context structure that has always been there. This makes it trivial to switch
to the generic scheduler thread implementation without having to touch any of
the other code that adds or removes scheduler entries.
In passing, I made some naming tweaks to add ast_ prefixes where they were not
there before.
Review: https://reviewboard.asterisk.org/r/1007/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@299091 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r297157 | mnicholson | 2010-12-01 13:47:33 -0600 (Wed, 01 Dec 2010) | 2 lines
Changed some NOTICE and WARNING messages to DEBUG messages.
........
r297486 | mnicholson | 2010-12-02 15:30:47 -0600 (Thu, 02 Dec 2010) | 6 lines
Add support for reserving a fax session before answering the channel.
Note: this change breaks ABI compatibility.
FAX-217
........
r297495 | mnicholson | 2010-12-03 09:21:52 -0600 (Fri, 03 Dec 2010) | 4 lines
Print a DEBUG message instead of a WARNING message when the selected fax tech does not support reserving sessions.
Answer the channel before quering it for t.38 support. This is necessary for the query to work properly over local channels.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@297496 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Add the ability to play a sound file, listen for more than just one digit,
specify
escape characters. Backwards compatible (to work with only timeout specified).
(closes issue #15531)
Reported by: diLLec
Patches:
asterisk-res_agi-203638-patched.patch uploaded by diLLec (license 839)
Tested by: diLLec, espiceland
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@295554 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
................
r294278 | jpeeler | 2010-11-08 15:59:45 -0600 (Mon, 08 Nov 2010) | 23 lines
Merged revisions 294277 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
........
r294277 | jpeeler | 2010-11-08 15:58:13 -0600 (Mon, 08 Nov 2010) | 16 lines
Fix playback failure when using IAX with the timerfd module.
To fix this issue the alert pipe will now be used when the timerfd module is
in use. There appeared to be a race that was not solved by adding locking in the
timerfd module, but needed to be there anyway. The race was between the timer
being put in non-continuous mode in ast_read on the channel thread and the IAX
frame scheduler queuing a frame which would enable continuous mode before the
non-continuous mode event was read. This race for now is simply avoided.
(closes issue #18110)
Reported by: tpanton
Tested by: tpanton
I put tested by tpanton because it was tested on his hardware. Thanks for the
remote access to debug this issue!
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@294279 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r292376 | tilghman | 2010-10-19 19:40:29 -0500 (Tue, 19 Oct 2010) | 5 lines
Oops. This module uses the generic timer and no longer uses DAHDI.
This causes a problem with the Solaris and other system builds that have gcc
4.1 (where optional_api is non-optional).
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@292377 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r292309 | twilson | 2010-10-19 12:27:32 -0700 (Tue, 19 Oct 2010) | 10 lines
Add sip show peer info about crypto and remove dated comment
This patch adds information about the encryption setting to 'sip show
peers' and removes an out-of-date comment from res_srtp.c and instead
directs users to the proper documentation.
(closes issue #18140)
Reported by: chodorenko
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@292310 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
................
r292050 | tzafrir | 2010-10-16 12:47:00 +0200 (ש', 16 אוק 2010) | 22 lines
Merged revisions 292049 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
........
r292049 | tzafrir | 2010-10-16 12:03:04 +0200 (ש', 16 אוק 2010) | 15 lines
Base directory for MOH should be ASTDATADIR
If the directive 'directory' is relative, make it relative to the
datadir, rather than to the varlibdir. In the sample configuration
it is relative ('moh').
This has no effect unless you have actively set the datadir explicitly
(at build time or at run time).
(closes issue #16906)
Patches:
moh_datadir uploaded by tzafrir (license 46)
Review: https://reviewboard.asterisk.org/r/974/
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@292052 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r292016 | twilson | 2010-10-15 16:40:56 -0500 (Fri, 15 Oct 2010) | 5 lines
Ref/unref res_srtp when we create/destroy a session
This avoids unhappy crashing when we try to 'core stop gracefully' and res_srtp
tries to unload before chan_sip does. Thanks, Russell!
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@292017 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
................
r291905 | twilson | 2010-10-15 09:39:58 -0700 (Fri, 15 Oct 2010) | 14 lines
Merged revisions 291904 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
........
r291904 | twilson | 2010-10-15 09:16:57 -0700 (Fri, 15 Oct 2010) | 7 lines
Don't crash or deadlock on module unload
We can't hold the lock while pthread_join is called since aji_log_hook will
attempt to lock from the other therad. We reorder the pthread_join and
ast_aji_disconnect so that we don't do an SSL_read() while SSL_shutdown is
running, causing a crash.
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@291906 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r291192 | dvossel | 2010-10-11 16:38:39 -0500 (Mon, 11 Oct 2010) | 19 lines
Gtalk enhancements and general code cleanup.
This patch includes several chan_gtalk enhancements.
Two new gtalk.conf options have been added, externip
and stunadd. Setting externip allows us to
manually specify what the external IP address is
outside of a NAT environment. Setting the stunaddr
option to a valid stun server allows for that external
ip to be retrieved via a STUN server automatically. This
external IP is then advertised during call setup as
a possible candidate.
I have also attempted to clean up chan_gtalk's code
so it meets our coding guidelines. During this cleanup
I noticed several things that need to be done in the
code and made a TODO section at the top of the file.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@291193 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r290542 | twilson | 2010-10-05 21:35:51 -0700 (Tue, 05 Oct 2010) | 6 lines
Don't try to send RTP when remote_address is null
It is possible for ast_rtp_stop() to be called which will clear the remote
address and cause the sendto to fail and spam warnings. Don't send in this
case.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@290543 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
................
r290255 | tilghman | 2010-10-04 18:23:11 -0500 (Mon, 04 Oct 2010) | 18 lines
Merged revisions 290254 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
........
r290254 | tilghman | 2010-10-04 18:14:59 -0500 (Mon, 04 Oct 2010) | 11 lines
Change new pattern matcher to regard dashes the same as the old pattern matcher -- as visual candy to be ignored.
Also change the AEL parser to not generate dashes within extensions, as those
dashes would be ignored. Update the AEL tests to match this behavior.
(closes issue #17366)
Reported by: murf
Patches:
20100727__issue17366.diff.txt uploaded by tilghman (license 14)
Tested by: tilghman
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@290256 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
................
r289840 | jpeeler | 2010-10-01 21:43:45 -0500 (Fri, 01 Oct 2010) | 29 lines
Merged revisions 289798 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
................
r289798 | jpeeler | 2010-10-01 18:01:31 -0500 (Fri, 01 Oct 2010) | 22 lines
Merged revisions 289797 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r289797 | jpeeler | 2010-10-01 17:58:38 -0500 (Fri, 01 Oct 2010) | 15 lines
Change RFC2833 DTMF event duration on end to report actual elapsed time.
The scenario here is with a non P2P early media session. The reported time
length of DTMF presses are coming up short when sending to the remote side.
Currently the event duration is a running total that is incremented when sending
continuation packets. These continuation packets are only triggered upon
incoming media from the remote side, which means that the running total probably
is not going to end up matching the actual length of time Asterisk received
DTMF. This patch changes the end event duration to be lengthened if it is
detected that the end event is going to come up short.
Review: https://reviewboard.asterisk.org/r/957/
ABE-2476
........
................
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@289841 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r287269 | pitel | 2010-09-17 10:37:49 +0200 (Pá, 17 zář 2010) | 8 lines
Support for HTTP redirects in calendar's URL
libneon does not support HTTP redirects (3xx responses) by default. You must tell it to follow them.
Also, another little unsigned int fix.
(closes issue #17776)
Review: https://reviewboard.asterisk.org/r/921/
........
r287270 | pitel | 2010-09-17 10:42:37 +0200 (Pá, 17 zář 2010) | 6 lines
Asterisk crashing because of double free when EWS request fails
The free is done later in code. I think ast_free() should have built in checks for double free.
(closes issue #17782)
........
r287271 | pitel | 2010-09-17 10:44:28 +0200 (Pá, 17 zář 2010) | 6 lines
Events are visible after they were removed from EWS calendar
Because we must merge calendar even when it's empty.
(closes issue #17786)
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@287272 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r287056 | twilson | 2010-09-15 17:17:17 -0500 (Wed, 15 Sep 2010) | 10 lines
Don't hang up a call on an SRTP unprotect failure
Also make it more obvious when there is an issue en/decrypting.
(closes issue #17563)
Reported by: Alexcr
Patches:
res_srtp.c.patch uploaded by sfritsch (license 1089)
Tested by: twilson
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@287057 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r284477 | twilson | 2010-09-01 13:44:36 -0500 (Wed, 01 Sep 2010) | 17 lines
Fix SRTP for changing SSRC and multiple a=crypto SDP lines
Adding code to Asterisk that changed the SSRC during bridges and masquerades
broke SRTP functionality. Also broken was handling the situation where an
incoming INVITE had more than one crypto offer. This patch caches the SRTP
policies the we use so that we can change the ssrc and inform libsrtp of the
new streams. It also uses the first acceptable a=crypto line from the incoming
INVITE.
(closes issue #17563)
Reported by: Alexcr
Patches:
srtp.diff uploaded by twilson (license 396)
Tested by: twilson
Review: https://reviewboard.asterisk.org/r/878/
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@284479 65c4cc65-6c06-0410-ace0-fbb531ad65f3
FAX output channel variables will now match the values reported by FAXOPT() and should be set in all failure and success cases.
This commit also contains a few modifications to the way FAXOPT() variables are populated in a few spots and fixes for some reference count leaks of the session details structure in some failure cases.
Also found and fixed more cases where FAXOPT(status) may not have gotten set.
FAX-214
FAX-203
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@278168 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r277568 | tilghman | 2010-07-16 16:54:29 -0500 (Fri, 16 Jul 2010) | 8 lines
Since we split values at the semicolon, we should store values with a semicolon as an encoded value.
(closes issue #17369)
Reported by: gkservice
Patches:
20100625__issue17369.diff.txt uploaded by tilghman (license 14)
Tested by: tilghman
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@277773 65c4cc65-6c06-0410-ace0-fbb531ad65f3
ast_sockaddr_stringiy_fmt (which is call by all ast_sockaddr_stringify* functions)
uses thread-local storage for storing the string that it creates. In cases where
ast_sockaddr_stringify_fmt was being called twice within the same statement, the
result of one call would be overwritten by the result of the other call. This
usually was happening in printf-like statements and was resulting in the same
stringified addressed being printed twice instead of two separate addresses.
I have fixed this by using ast_strdupa on the result of stringify functions if
they are used twice within the same statement. As far as I could tell, there were
no instances where a pointer to the result of such a call were saved anywhere, so
this is the only situation I could see where this error could occur.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@276570 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The purpose of this patch is to eliminate struct ast_callerid since it has
turned into a miscellaneous collection of various party information.
Eliminate struct ast_callerid and replace it with the following struct
organization:
struct ast_party_name {
char *str;
int char_set;
int presentation;
unsigned char valid;
};
struct ast_party_number {
char *str;
int plan;
int presentation;
unsigned char valid;
};
struct ast_party_subaddress {
char *str;
int type;
unsigned char odd_even_indicator;
unsigned char valid;
};
struct ast_party_id {
struct ast_party_name name;
struct ast_party_number number;
struct ast_party_subaddress subaddress;
char *tag;
};
struct ast_party_dialed {
struct {
char *str;
int plan;
} number;
struct ast_party_subaddress subaddress;
int transit_network_select;
};
struct ast_party_caller {
struct ast_party_id id;
char *ani;
int ani2;
};
The new organization adds some new information as well.
* The party name and number now have their own presentation value that can
be manipulated independently. ISDN supplies the presentation value for
the name and number at different times with the possibility that they
could be different.
* The party name and number now have a valid flag. Before this change the
name or number string could be empty if the presentation were restricted.
Most channel drivers assume that the name or number is then simply not
available instead of indicating that the name or number was restricted.
* The party name now has a character set value. SIP and Q.SIG have the
ability to indicate what character set a name string is using so it could
be presented properly.
* The dialed party now has a numbering plan value that could be useful to
have available.
The various channel drivers will need to be updated to support the new
core features as needed. They have simply been converted to supply
current functionality at this time.
The following items of note were either corrected or enhanced:
* The CONNECTEDLINE() and REDIRECTING() dialplan functions were
consolidated into func_callerid.c to share party id handling code.
* CALLERPRES() is now deprecated because the name and number have their
own presentation values.
* Fixed app_alarmreceiver.c write_metadata(). The workstring[] could
contain garbage. It also can only contain the caller id number so using
ast_callerid_parse() on it is silly. There was also a typo in the
CALLERNAME if test.
* Fixed app_rpt.c using ast_callerid_parse() on the channel's caller id
number string. ast_callerid_parse() alters the given buffer which in this
case is the channel's caller id number string. Then using
ast_shrink_phone_number() could alter it even more.
* Fixed caller ID name and number memory leak in chan_usbradio.c.
* Fixed uninitialized char arrays cid_num[] and cid_name[] in
sig_analog.c.
* Protected access to a caller channel with lock in chan_sip.c.
* Clarified intent of code in app_meetme.c sla_ring_station() and
dial_trunk(). Also made save all caller ID data instead of just the name
and number strings.
* Simplified cdr.c set_one_cid(). It hand coded the ast_callerid_merge()
function.
* Corrected some weirdness with app_privacy.c's use of caller
presentation.
Review: https://reviewboard.asterisk.org/r/702/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@276347 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This adds a generic API for accommodating IPv6 and IPv4 addresses
within Asterisk. While many files have been updated to make use of the
API, chan_sip and the RTP code are the files which actually support
IPv6 addresses at the time of this commit. The way has been paved for
easier upgrading for other files in the near future, though.
Big thanks go to Simon Perrault, Marc Blanchet, and Jean-Philippe Dionne
for their hard work on this.
(closes issue #17565)
Reported by: russell
Patches:
asteriskv6-test-report.pdf uploaded by russell (license 2)
Review: https://reviewboard.asterisk.org/r/743
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@274783 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r274157 | mmichelson | 2010-07-06 09:29:23 -0500 (Tue, 06 Jul 2010) | 16 lines
Fix problem with RFC 2833 DTMF not being accepted.
A recent check was added to ensure that we did not erroneously
detect duplicate DTMF when we received packets out of order.
The problem was that the check did not account for the fact that
the seqno of an RTP stream will roll over back to 0 after hitting
65535. Now, we have a secondary check that will ensure that the
seqno rolling over will not cause us to stop accepting DTMF.
(closes issue #17571)
Reported by: mdeneen
Patches:
rtp_seqno_rollover.patch uploaded by mmichelson (license 60)
Tested by: richardf, maxochoa, JJCinAZ
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@274164 65c4cc65-6c06-0410-ace0-fbb531ad65f3
David Vossel
Tilghman Lesher
Jonathan Rose
Matthew Nicholson
Terry Wilson
Leif Madsen
Russell Bryant
Richard Mudgett
Gregory Nietsky
Paul Belanger
Brett Bryant
Tzafrir Cohen
Andrew Latham
Jason Parker
Sean Bright
Kevin P. Fleming
Mark Murawki
Jan Kalab
Brad Watkins
Erin Spiceland
Jeff Peeler
Olle Johansson
Bradley Latus
Mark Michelson
Eliel C. Sardanons