Although the dlg session count was incremented in a pjsip servant
thread, there's no guarantee that the last thread to unref this
progress object was one. Before we decrement, we need to make
sure that this is either a servant thread or that we push the
decrement to a serializer that is one.
Because pjsip_dlg_dec_session requires the dialog lock, we don't
want to wait on the task to complete if we had to push it to a
serializer.
Change-Id: I8ff2d5d94be3ff04298394070434e22a7d3cbc41
When registering it can be useful to see the source IP address and
port in cases where multiple devices are using the same endpoint
or when anonymous is in use.
ASTERISK-29325
Change-Id: Ie178a6f55f53f8473035854c411bc3d056e0a2e0
When Asterisk sends a reinvite negotiating T38 faxing, it's possible a
crash can occur if the response contains a m=image and zero port. The
reinvite callback code now checks session_media to see if it is null or
not before trying to access the udptl variable on it.
ASTERISK-29305
Change-Id: I1dfc51c5fa586e38579ede4bc228edee213ccaa9
Fixed:
* RFC 4629 does not allow the value "0" for MPI, K, and N.
* Allow value "0" for PAR.
* BPP is printed only when specified because "0" has a meaning.
New:
* Added CPCF and MaxBR.
* Some implementations provide CIF without MPI: a=fmtp:xx CIF;F=1
Although a violation of RFC 3555 section 3, we can support that.
Changed:
* Resorts the CIFs from large to small which partly fixes ASTERISK~29267.
Change-Id: I95a650c715007b8dde11a77cb37d9c6c123a441e
When sending a SIP response to an incoming REGISTER request
we don't want to change the Contact header as it will
contain the Contacts registered to the AOR and not our own
Contact URI.
ASTERISK-29235
Change-Id: I35a0723545281dd01fcd5cae497baab58720478c
This change will check is the remote ICE session got reset or not by
checking the offered ufrag and password with session. If the remote ICE
reset session then Asterisk reset its local ufrag and password to reject
binding request with Old ufrag and Password.
ASTERISK-29266
Change-Id: I9c55e79a7af98a8fbb497d336b828ba41bc34eeb
If set_outbound_initial_authentication_credentials() fails,
handle_client_registration() bails early without creating or
sending a register message.
[set_outbound_initial_authentication_credentials() failures
can occur during the process of retrieving an oauth access
token.]
The return from handle_client_registration is ignored, so
returning an error doesn't do any good.
This is a real problem when the registration request is a
re-register, because then the registration will still be
marked 'active' despite the re-register never being sent at all.
So instead, log a warning but let the registration be created
and sent (and probably fail) and follow the normal registration
failed retry/abort logic.
ASTERISK-29315 #close
Change-Id: I2e03b1ea7fba1fa1a8279086aa4b17679e7fa7fa
Although refer_progress_notify() always runs in the progress
serializer, the pjproject evsub module itself can cause the
subscription to be destroyed which then triggers
refer_progress_on_evsub_state() to clean it up. In this case,
it's possible that refer_progress_notify() could get the
subscription pulled out from under it while it's trying to use
it.
At one point we tried to have refer_progress_on_evsub_state()
push the cleanup to the serializer and wait for its return before
returning to pjproject but since pjproject calls its state
callbacks with the dialog locked, this required us to unlock the
dialog while waiting for the serialized cleanup, then lock it
again before returning to pjproject. There were also still some
cases where other callers of refer_progress_notify() weren't
using the serializer and crashes were resulting.
Although all callers of refer_progress_notify() now use the
progress serializer, we decided to simplify the locking so we
didn't have to unlock and relock the dialog in
refer_progress_on_evsub_state().
Now, refer_progress_notify() holds the dialog lock for its
duration and since pjproject also holds the dialog lock while
calling refer_progress_on_evsub_state() (which does the cleanup),
there should be no more chances for the subscription to be
cleaned up while still being used to send NOTIFYs.
To be extra safe, we also now increment the session count on
the dialog when we create a progress object and decrement
the count when the progress is destroyed.
ASTERISK-29313
Change-Id: I97a8bb01771a3c85345649b8124507f7622a8480
For some RTCP packet types the report count is actually the packet's subtype.
This was not being reflected in the packet debug output.
This patch makes it so for some RTCP packet types a "Packet Subtype" is
now output in the debug replacing the "Reception reports" (i.e count).
Change-Id: Id4f4b77bb37077a4c4f039abd6a069287bfefcb8
When PJSIP receives a re-INVITE without an SDP offer the INVITE
session library will first call the on_create_offer callback and
if unavailable then use the active negotiated SDP as the offer.
In some cases this would result in a different SDP then was
previously used without an incremented SDP version number. The two
known cases are:
1. Sending an initial INVITE with a set of codecs and having the
remote side answer with a subset. The active negotiated SDP would
have the pruned list but would not have an incremented SDP version
number.
2. Using re-INVITE for unhold. We would modify the active negotiated
SDP but would not increment the SDP version.
To solve these, and potential other unknown cases, the on_create_offer
callback has now been implemented which produces a fresh offer with
incremented SDP version number. This better fits within the model
provided by the INVITE session library.
ASTERISK-28452
Change-Id: I2d81048d54edcb80fe38fdbb954a86f0a58281a1
Also improve the in-process documentation to clarify that the value is
initialised from the DSN and not default false, but that the DSN's value
is default false if unset.
ASTERISK-29311 #close
Change-Id: I46e2379f7b0656034442bce77cb37ccd4e61098d
Signed-off-by: Jaco Kroon <jaco@uls.co.za>
Removes an unnecessary check for the conditional that compares the
stream topologies to see if they are equal to suppress re-invites. This
was a problem when a Digium phone received an INVITE that offered codecs
different than what it supported, causing Asterisk to send the
re-invite.
ASTERISK-29303
Change-Id: I04dc91befb2387904e28a9aaeaa3bcdbcaa7fa63
Added a SELECT 'LIMIT' clause to realtime_pgsql() and refactored the function.
ASTERISK-29293 #close
Change-Id: If5a6d4b1072ea2e6e89059b21139d554a74b34f5
When an endpoint requests to re-negotiate for fax and the incoming
re-invite is received prior to Asterisk sending out the 200 OK for
the initial invite the re-invite gets delayed. When Asterisk does
finally send the re-inivite the SDP includes streams for both audio
and T.38.
This happens because when the pending topology and active topologies
differ (pending stream is not in the active) in the delayed scenario
the pending stream is appended to the active topology. However, in
the fax case the pending stream should replace the active.
This patch makes it so when a delay occurs during fax negotiation,
to or from, the audio stream is replaced by the T.38 stream, or vice
versa instead of being appended.
Further when Asterisk sent the re-invite with both audio and T.38,
and the endpoint responded with a declined T.38 stream then Asterisk
would crash when attempting to change the T.38 state.
This patch also puts in a check that ensures the media state has a
valid fax session (associated udptl object) before changing the
T.38 state internally.
ASTERISK-29203 #close
Change-Id: I407f4fa58651255b6a9030d34fd6578cf65ccf09
New responses sent within a PJSIP sessions are based on those that were
sent before. Therefore, adding/modifying a header once causes it to be
sent on all responses that follow.
Sending 181 Call Is Being Forwarded many times first adds "histinfo"
duplicated more and more, and eventually overflows past the array
boundary.
This commit adds a check preventing adding "histinfo" more than once,
and skipping it if there is no more space in the header.
Similar overflow situations can also occur in res_pjsip_path and
res_pjsip_outbound_registration so those were also modified to
check the bounds and suppress duplicate Supported values.
ASTERISK-29227
Reported by: Ivan Poddubny
Change-Id: Id43704a1f1a0293e35cc7f844026f0b04f2ac322
refer_progress_notify wasn't always being called from the progress
serializer. This could allow clearing notification->progress->sub
in one thread while another was trying to use it.
* Instances where refer_progress_notify was being called in-line,
have been changed to use ast_sip_push_task().
Change-Id: Idcf1934c4e873f2c82e2d106f8d9f040caf9fa1e
if From number contain * or # asterisk will not add user=phone
Currently only number that uses AST_DIGIT_ANYNUM can have "user=phone" but the validation should use AST_DIGIT_ANY
this is a problem when you want to send call to ISUP
as they will disregard the From header and either replace From with anonymous or with p-asserted-identity
ASTERISK-29261
Reported by: Mark Petersen
Tested by: Mark Petersen
Change-Id: I3307bdbf757582740bfee4110e85f7b6c9291cc4
Provided a support of variuos URL-schemes for res_musiconhold,
registered by ast_bucket_scheme_register().
ASTERISK-29262 #close
Change-Id: If0ea8697587353dce358a70035d82649fd4632b6
The last argument to ast_copy_string() is the buffer size, not the
number of characters, so we add 1 to avoid stamping out the final \n
in the persisted SUBSCRIBE message.
Change-Id: I019b78942836f57965299af15d173911fcead5b2
function ast_sip_session_media_state_add.
Check ast_media_type matches when a ast_sip_session_media is found
otherwise when transitioning from say image to audio, the wrong
session is returned in the first if statement.
ASTERISK-29220 #close
Change-Id: I6f6efa9b821ebe8881bb4c8c957f8802ddcb4b5d
When both a tech subscription and an endpoint subscription exist for a given
endpoint, TextMessageReceived events are dispatched to the tech subscription
only.
ASTERISK-29229
Change-Id: I9eac4cba5f9e27285a282509395347abc58fc2b8
session->channel doesn't exist until chan_pjsip creates it, so intead of
setting a channel variable every new incoming call sets one and the same
global variable.
This patch moves the code to chan_pjsip so that SIPDOMAIN is set on
a newly created channel, it also removes a misleading reference to
channel->session used to fetch call pickup configuraion.
ASTERISK-29240
Change-Id: I90c9bbbed01f5d8863585631a29322ae4e046755
This reverts commit 2fe76dd816.
Reason for revert: Too many issues reported. Need to research and correct.
ASTERISK-29230
ASTERISK-29231
Reported by: Michael Maier
Change-Id: I6453af680e17d8ffe7af2c5de7e1b2a58c8793cb
Segfault occurs during outbound UDP registration when all
transport states are being iterated over. The transport object
in the transport is accessed, but flow transports have a NULL
transport object.
Modify to not iterate over any flow transport
ASTERISK-29210 #close
Change-Id: If28dc3a18bdcbd0a49598b09b7fe4404d45c996a
Add a check to see if the URI is a Tel URI and prevent crashing on
trying to retrieve the reason parameter.
ASTERISK-29191
ASTERISK-29219
Change-Id: I0320aa205f22cda511d60a2edf2b037e8fd6cc37
(cherry picked from commit a7aea71e60)
AST_VECTOR_SIZE() returns a size_t. This is not always equivalent to an
unsigned long on all machines.
Change-Id: I0a4189a104e6e3a2e2273de06620eaef19df9338
The documentation in the wiki says there should be spyee-channel
information elements in the ChanSpyStop AMI event.
https://wiki.asterisk.org/wiki/x/Xc5uAg
However, this is not the case in Asterisk <= 16.10.0 Version. We're
using these Spyee* arguments since Asterisk 11.x, so these arguments
vanished in Asterisk 12 or higher.
For maximum compatibility, we still send the ChanSpyStop event even if
we are not able to find any 'Spyee' information.
ASTERISK-28883 #close
Change-Id: I81ce397a3fd614c094d043ffe5b1b1d76188835f
In rewrite_uri asterisk was not making deep copies of strings when
changing the uri. This was in some cases causing garbage in the route
header and in other cases even crashing asterisk when receiving a
message with a record-route header set. Thanks to Ralf Kubis for
pointing out why this happens. A similar problem was found in
res_pjsip_transport_websocket.c. Pjproject needs as well to be patched
to avoid garbage in CANCEL messages.
ASTERISK-29024 #close
Change-Id: Ic5acd7fa2fbda3080f5f36ef12e46804939b198b
This adds support for both Digium and Sangoma user agent strings
for the Sangoma specific body supplement.
Change-Id: Ib99362b24b91d3cbe888d8b2fce3fad5515d9482
In some circumstances it was possible for an INVITE
session to be destroyed while we were still using it.
This occurred due to the reference on the INVITE session
being released internally as a result of its state
changing to DISCONNECTED.
This change adds a reference to the INVITE session
which is released when our own session is destroyed,
ensuring that the INVITE session remains valid for
the lifetime of our session.
ASTERISK-29022
Change-Id: I300c6d9005ff0e6efbe1132daefc7e47ca6228c9
By default libcurl does not follow redirects, so we explicitly enable
it by setting CURLOPT_FOLLOWLOCATION. Once that is enabled, libcurl
will follow up to CURLOPT_MAXREDIRS redirects, which by default is
configured to be unlimited.
This patch sets CURLOPT_MAXREDIRS to a more reasonable default (8). If
we determine at some point that this needs to be increased on
configurable it is a trivial change.
ASTERISK-29173 #close
Change-Id: I4925ebbcf0c7d728bb9252b3795b3479ae225b30
the 'J' is missing in module description.
"PSIP STIR/SHAKEN Module for Asterisk" -> "PJSIP STIR/SHAKEN Module for Asterisk"
ASTERISK-29175 #close
Change-Id: I17da008540ee2e8496b644d05f995b320b54ad7a
RFC 3261 says that the Accept-Encoding header should be present
in an options response. Permitted values according to RFC 2616
are only compression algorithms like gzip or the default identity
encoding. Therefore "text/plain" is not a correct value here.
As long as the header is hard coded, it should be set to "identity".
Without this fix an Alcatel OmniPCX periodically logs warnings like
"[sip_acceptIncorrectHeader] Header Accept-Encoding is malformed"
on a SIP Trunk.
ASTERISK-29165 #close
Change-Id: I0aa2211ebf0b4c2ed554ac7cda794523803a3840
* Instead of using the pjproject timer heap, we now use our own
pjsip_scheduler. This allows us to more easily debug and allows us to
see times in "pjsip show/list registrations" as well as being able to
see the registrations in "pjsip show scheduled_tasks".
* Added the last registration time, registration interval, and the next
registration time to the CLI output.
* Removed calls to pjsip_regc_info() except where absolutely necessary.
Most of the calls were just to get the server and client URIs for log
messages so we now just save them on the client_state object when we
create it.
* Added log messages where needed and updated most of the existong ones
to include the registration object name at the start of the message.
Change-Id: I4534a0fc78c7cb69f23b7b449dda9748c90daca2
* Added a ONESHOT type that never reschedules.
* Added "like" capability to "pjsip show scheduled_tasks" so you can do
the following:
CLI> pjsip show scheduled_tasks like outreg
PJSIP Scheduled Tasks:
Task Name Interval Times Run ...
============================================= ========= ========= ...
pjsip/outreg/testtrunk-reg-0-00000074 50.000 oneshot ...
pjsip/outreg/voipms-reg-0-00000073 110.000 oneshot ...
* Fixed incorrect display of "Next Start".
* Compacted the displays of times in the CLI.
* Added two new functions (ast_sip_sched_task_get_times2,
ast_sip_sched_task_get_times_by_name2) that retrieve the interval,
next start time, and next run time in addition to the times already
returned by ast_sip_sched_task_get_times().
Change-Id: Ie718ca9fd30490b8a167bedf6b0b06d619dc52f3
This avoids the inclusion of the OpenSSL headers in the public header,
which avoids one external library dependency in res_pjsip_stir_shaken.
Change-Id: I6a07e2d81d2b5442e24e99b8cc733a99f881dcf4
pjproject returns the dialog locked and with a reference. However,
in Asterisk the method that handles this decrements the reference
and removes the lock prior to returning. This makes it possible,
under some circumstances, for another thread to free said dialog
before the thread that created it attempts to use it again. Of
course when the thread that created it tries to use a freed dialog
a crash can occur.
This patch makes it so Asterisk now returns the newly created
dialog both locked, and with an added reference. This allows the
caller to de-reference, and unlock the dialog when it is safe to
do so.
In the case of a new SIP Invite the lock, and reference are now
held for the entirety of the new invite handling process.
Otherwise it's possible for the dialog, or its dependent objects,
like the transaction, to disappear. For example if there is a TCP
transport error.
ASTERISK-29057 #close
Change-Id: I5ef645a47829596f402cf383dc02c629c618969e
(cherry picked from commit 6baa4b53be)
If Asterisk sends out and INVITE and receives a challenge with a
different nonce value each time, it will continually send out INVITEs,
even if the call is hung up. The endpoint must be configured for
outbound authentication in order for this to occur. A limit has been set
on outbound INVITEs so that, once reached, Asterisk will stop sending
INVITEs and the transaction will terminate.
ASTERISK-29013
Change-Id: I2d001ca745b00ca8aa12030f2240cd72363b46f7
This patch initializes a couple of local variables to some default values.
Interestingly, in the 'pj_status_t dlg_status' case the value not being
initialized caused memory to grow, and not be recovered, in the off nominal
path (at least on my machine).
Change-Id: I22ee65e1e1bff8efacea8a167c6c8428898523f7
Commit 44bb0858cb ("debugging: Add enough
to choke a mule") accidentally removed calls to
ast_sip_message_apply_transport when it was attempting to just add
debugging code.
The kiss of death was saying that there were no functional changes in
the commit comment.
This makes outbound calls that use the 'flow' transport mechanism fail,
since this call is used to relay headers into the outbound INVITE
requests.
ASTERISK-29124 #close
Change-Id: I0f3e32c2e8ac415e30b1d29966d75a1546f0526a
This changes the outgoing offer call preference
default option to match the behavior of previous
versions of Asterisk.
The additional advanced codec negotiation options
have also been removed from the sample configuration
and marked as reserved for future functionality in
XML documentation.
The codec preference options have also been fixed to
enforce local codec configuration.
ASTERISK-29109
Change-Id: Iad19347bd5f3d89900c15ecddfebf5e20950a1c2
When handling a send_message request to a non-existing endpoint, the response's
body is overriden and not properly freed.
ASTERISK-29108
Change-Id: Ie1d3d70065f80793445b60f5e4a7eb31b4b9c5c8
Added debug logging categories that allow a user to output debug
information based on a specified category. This lets the user limit,
and filter debug output to data relevant to a particular context,
or topic. For instance the following categories are now available for
debug logging purposes:
dtls, dtls_packet, ice, rtcp, rtcp_packet, rtp, rtp_packet,
stun, stun_packet
These debug categories can be enable/disable via an Asterisk CLI command.
While this overrides, and outputs debug data, core system debugging is
not affected by this patch. Statements still output at their appropriate
debug level. As well backwards compatibility has been maintained with
past debug groups that could be enabled using the CLI (e.g. rtpdebug,
stundebug, etc.).
ASTERISK-29054 #close
Change-Id: I6e6cb247bb1f01dbf34750b2cd98e5b5b41a1849
In the event that the desired extension already exists,
ast_add_extension2_lockopt() will free the 'data' it is passed before
returning an error, so we should not be freeing it ourselves.
Additionally, there were two places where ast_add_extension2_lockopt()
could return an error without also freeing the 'data' pointer, so we
add that.
ASTERISK-29097 #close
Change-Id: I904707aae55169feda050a5ed7c6793b53fe6eae
Stop advertising RFC2833 support on the rtp_engine when DTMF mode is
auto but no tel_event was found inside SDP file.
On an incoming call create_rtp will be called and when session->dtmf is
set to AST_SIP_DTMF_AUTO, the AST_RTP_PROPERTY_DTMF will be set without
looking at the SDP file.
Once get_codecs gets called we move the DTMF mode from RFC2833 to INBAND
but continued to advertise RFC2833 support.
This meant the native_rtp bridge would falsely consider the two channels
as compatible. In addition to changing the DTMF mode we now set or
remove the AST_RTP_PROPERTY_DTMF.
The property is checked in ast_rtp_dtmf_compatible and called by
native_rtp_bridge_compatible.
ASTERISK-29051 #close
Change-Id: I1e0c1e324598a437932c0b7836bcb626aba8e287
Arming response to both AST_SIP_SESSION_BEFORE_REDIRECTING and
AST_SIP_SESSION_BEFORE_MEDIA causes 302 to to be handled twice,
resulting in to 181 being generated.
Change-Id: I866e5461564644ffb8a5e12b6f1330b50a7b63ab
When constructing a stream name based on the media type
and position the allocated name was not being freed
causing a leak.
Change-Id: I52510863b24a2f531f0a55b440bb2c81844029de
Only track our sample offset if we are playing a non-announcement file,
otherwise we will skip that number of samples when we start playing the
first MoH file.
ASTERISK-24329 #close
Change-Id: Ib6b3c84fcaa1063889ab38ba7e7fc50050a3ccfc
The ast_sip_dialog_get_session function returns the session
with reference count increased. This was not taken into
account and was causing sessions to remain around when they
should not be.
ASTERISK-29089
Change-Id: I430fa721b0a824311a59effec6056e9ec528e3e8
Sometimes not play MOH on bridge.
ASTERISK-29081
Reported-by: Michal Hajek <michal.hajek@daktela.com>
Change-Id: I760c73e0c9be1d340303b5d1c18a00c4759e8232
The module description needs to be on the same line as the
AST_MODULE_INFO or it is not parsed correctly.
Change-Id: I9ba11df1415369790e8656fcb527bb2749373c21
Implemention of History-Info capable of interworking with Diversion
Header following RFC7544
ASTERISK-29027 #close
Change-Id: I2296369582d4b295c5ea1e60bec391dd1d318fa6
The recent 491 changes introduced a check to determine if the active
and pending topologies were equal and to suppress the re-invite if they
were. When a re-invite is sent for a COLP-only change, the pending
topology is NULL so that check doesn't happen and the re-invite is
correctly sent. Of course, sending the re-invite sets the pending
topology. If a 491 is received, when we resend the re-invite, the
pending topology is set and since we didn't request a change to the
topology in the first place, pending and active topologies are equal so
the topologies-equal check causes the re-invite to be erroneously
suppressed.
This change checks if the topologies are equal before we run the media
state resolver (which recreates the pending topology) so that when we
do the final topologies-equal check we know if this was a topology
change request. If it wasn't a change request, we don't suppress
the re-invite even though the topologies are equal.
ASTERISK-29014
Change-Id: Iffd7dd0500301156a566119ebde528d1a9573314
Added to:
* bridges/bridge_softmix.c
* channels/chan_pjsip.c
* include/asterisk/res_pjsip_session.h
* main/channel.c
* res/res_pjsip_session.c
There NO functional changes in this commit.
Change-Id: I06af034d1ff3ea1feb56596fd7bd6d7939dfdcc3
When both Asterisk and a UA send re-invites at the same time, both
send 491 "Transaction in progress" responses to each other and back
off a specified amount of time before retrying. When Asterisk
prepares to send its re-invite, it sets up the session's pending
media state with the new topology it wants, then sends the
re-invite. Unfortunately, when it received the re-invite from the
UA, it partially processed the media in the re-invite and reset
the pending media state before sending the 491 losing the state it
set in its own re-invite.
Asterisk also was not tracking re-invites received while an existing
re-invite was queued resulting in sending stale SDP with missing
or duplicated streams, or no re-invite at all because we erroneously
determined that a re-invite wasn't needed.
There was also an issue in bridge_softmix where we were using a stream
from the wrong topology to determine if a stream was added. This also
caused us to erroneously determine that a re-invite wasn't needed.
Regardless of how the delayed re-invite was triggered, we need to
reconcile the topology that was active at the time the delayed
request was queued, the pending topology of the queued request,
and the topology currently active on the session. To do this we
need a topology resolver AND we need to make stream named unique
so we can accurately tell what a stream has been added or removed
and if we can re-use a slot in the topology.
Summary of changes:
* bridge_softmix:
* We no longer reset the stream name to "removed" in
remove_all_original_streams(). That was causing multiple streams
to have the same name and wrecked the checks for duplicate streams.
* softmix_bridge_stream_sources_update() was checking the old_stream
to see if it had the softmix prefix and not considering the stream
as "new" if it did. If the stream in that slot has something in it
because another re-invite happened, then that slot in old might
have a softmix stream but the same stream in new might actually
be a new one. Now we check the new_stream's name instead of
the old_stream's.
* stream:
* Instead of using plain media type name ("audio", "video", etc) as
the default stream name, we now append the stream position to it
to make it unique. We need to do this so we can distinguish multiple
streams of the same type from each other.
* When we set a stream's state to REMOVED, we no longer reset its
name to "removed" or destroy its metadata. Again, we need to
do this so we can distinguish multiple streams of the same
type from each other.
* res_pjsip_session:
* Added resolve_refresh_media_states() that takes in 3 media states
and creates an up-to-date pending media state that includes the changes
that might have happened while a delayed session refresh was in the
delayed queue.
* Added is_media_state_valid() that checks the consistency of
a media state and returns a true/false value. A valid state has:
* The same number of stream entries as media session entries.
Some media session entries can be NULL however.
* No duplicate streams.
* A valid stream for each non-NULL media session.
* A stream that matches each media session's stream_num
and media type.
* Updated handle_incoming_sdp() to set the stream name to include the
stream position number in the name to make it unique.
* Updated the ast_sip_session_delayed_request structure to include both
the pending and active media states and updated the associated delay
functions to process them.
* Updated sip_session_refresh() to accept both the pending and active
media states that were in effect when the request was originally queued
and to pass them on should the request need to be delayed again.
* Updated sip_session_refresh() to call resolve_refresh_media_states()
and substitute its results for the pending state passed in.
* Updated sip_session_refresh() with additional debugging.
* Updated session_reinvite_on_rx_request() to simply return PJ_FALSE
to pjproject if a transaction is in progress. This stops us from
creating a partial pending media state that would be invalid later on.
* Updated reschedule_reinvite() to clone both the current pending and
active media states and pass them to delay_request() so the resolver
can tell what the original intention of the re-invite was.
* Added a large unit test for the resolver.
ASTERISK-29014
Change-Id: Id3440972943c611a15f652c6c569fa0e4536bfcb
Currently, it was not possible to create bridge with video_mode single.
This made hard to put the bridge in a vidoe_single mode.
So, added video_single option for Bridge creation using the ARI.
This allows create a bridge with video_mode single.
ASTERISK-29055
Change-Id: I43e720e5c83fc75fafe10fe22808ae7f055da2ae
Building on ASTERISK-25854. When the device requests hold by sending SDP with attribute recvonly, asterisk places the session in sendonly mode. When the device later requests to resume the call by using a re-INVITE excluding SDP, asterisk needs to change the sendonly mode to sendrecv again.
Change-Id: I60341ce3d87f95869f3bc6dc358bd3e8286477a6
When fixing issues uncovered by GCC10 a copy of the parker UUID
was removed accidentally. This change restores it so that the
subscription has the data it needs.
ASTERISK-29042
Change-Id: I7d396a14ea648bd26d3c363dd78e78bd386b544a
Properly bump reference on format object to avoid memory corruption on double free
ASTERISK-29040 #close
Change-Id: Ic5a7faabfe2ef965ddb024186e1de7ca4542e2a3
Adapt the response handler so it also called when 181 is received.
In the case 181 is received, also generate the 181 response.
ASTERISK-29001 #close
Change-Id: I73cfee46a8ca85371280ebdb38674f8fde7510df
Per the RFC when an outgoing re-INVITE is done we should
only terminate the dialog if a 481 or 408 is received.
ASTERISK-29033
Change-Id: I6c3ff513aa41005d02de0396ba820083e9b18503
Two changes of note in this patch:
* Use ast_file_read_dir instead of opendir/readdir/closedir
* If the files list should be sorted, do that at the end rather than as
we go which improves performance for large lists
Change-Id: Ic7e9c913c0f85754c99c74c9cf6dd3514b1b941f
The MoH class internal file vector is potentially being manipulated by
multiple threads at the same time without sufficient locking. Switch to
a reference counted list and operate on copies where necessary.
ASTERISK-28927 #close
Change-Id: I479c5dcf88db670956e8cac177b5826c986b0217
When reading in a codec preference configuration option
the value would be set on the respective option before
applying any default adjustments, resulting in the
configuration not being as expected.
This was exposed by the REST API push configuration as
it used the configuration returned by Asterisk to then do
a modification. In the case of codec preferences one of
the options had a transcode value of "unspecified" when the
defaults should have ensured it would be "allow" instead.
This also renames the options in other places that were
missed.
Change-Id: I4ad42e74fdf181be2e17bc75901c62591d403964
This change renames the codec preference endpoint options.
incoming_offer_codec_prefs becomes codec_prefs_incoming_offer
to keep the options together when showing an endpoint.
Change-Id: I6202965b4723777f22a83afcbbafcdafb1d11c8d
When a bundled stream is removed, its bundle_group is reset to -1.
If that stream is later reused, the bundle parameters on session
media need to be reset correctly it could mistakenly be rebundled
with a stream that was removed and never reused. Since the removed
stream has no rtp instance, a crash will result.
Change-Id: Ie2b792220f9291587ab5f9fd123145559dba96d7
Statically configured contacts on an AOR don't have an expiration
time so when adding them to the resulting 200 OK if an endpoint
registers ensure they are marked as such.
ASTERISK-28995
Change-Id: I9f0e45eb2ccdedc9a0df5358634a19ccab0ad596
Currently, if the bridge has created by the ARI, the video_mode
parameter was
not shown in the BridgeCreated event correctly.
Fixed it and added video_mode shown in the 'bridge show <bridge id>'
cli.
ASTERISK-28987
Change-Id: I8c205126724e34c2bdab9380f523eb62478e4295
When dealing with a lot of video streams on WebRTC
the resulting SDPs can grow to be quite large. This
effectively doubles the maximum size to allow more
streams to exist.
The res_http_websocket module has also been changed
to use a buffer on the session for reading in packets
to ensure that the stack space usage is not excessive.
Change-Id: I31d4351d70c8e2c11564807a7528b984f3fbdd01
We read beyond the end of the buffer when copying the string out of the
buffer when we used ast_copy_string() because the original string was
not null terminated. Instead switch to ast_strndup() which does not
exhibit the same behavior.
ASTERISK-28975 #close
Change-Id: Ib4a75cffeb1eb8cf01136ef30306bd623e531a2a
Added a new configuration option for PJSIP endpoints - stir_shaken. If
set to yes, then STIR/SHAKEN support will be added to inbound and
outbound INVITEs. The default is no. Alembic has been updated to include
this option.
Previously the dialplan function was not trimming the whitespace from
the parameters it recieved. Now it does.
Also added a conditional that, when TEST_FRAMEWORK is enabled, the
timestamp in the identity header will be overlooked. This is just for
testing, since the testsuite will rely on a SIPp scenario with a preset
identity header to trigger the MISMATCH result.
Change-Id: I43d67f1489b8c1c5729ed3ca8d71e35ddf438df1
session_on_rx_response wasn't checking for a NULL dialog before
attempting to get the invite session from it.
Change-Id: Id13534375966cc2eb7f2b55717c9813c63c10065
Prior to making any modifications to the pjsip infrastructure
for ACN, I've added the tracing functions to the existing code.
This should make the final commit easier to review, but we can also
now run a "before and after" trace.
No functional changes were made with this commit.
Change-Id: Ia83a1a2687ccb96f2bc8a2a3928a5214c4be775c
This commit adds the endpoint options required to control
Advanced Codec Negotiation.
incoming_offer_codec_prefs
outgoing_offer_codec_prefs
incoming_answer_codec_prefs
outgoing_answer_codec_prefs
The documentation may need tweaking and some additional edits
added, especially for the "answer" prefs. That'll be handled
when things finalize.
This commit is safe to merge as it doens't alter any existing
functionality nor does it alter the previous codec negotiation
work which may now be obsolete.
Change-Id: I920ba925d7dd36430dfd2ebd9d82d23f123d0e11
Currently when the pjsip making an outgoing request, it keep adding the
rport parameter in a request message as a default.
This causes unexpected rport handle at the other end.
Added option for disable this behaviour in the pjsip.conf.
This is a system option, but working as a gloabl option.
ASTERISK-28959
Change-Id: I9596675e52a742774738b5aad5d1fec32f477abc
Do not return error if the client received ping frame
while looking for a string and just wait for another frame.
ASTERISK-28958 #close
Change-Id: I4d06b4827bd71e56cbaafc011ffdcef9f0332922
When using the PSJIP_MEDIA_OFFER dialplan function it was not
overriding an endpoint's configured codecs on refresh unless
they had a shared codec between the two.
This patch makes it so whatever is set using PJSIP_MEDIA_OFFER
is used when creating the SDP for a refresh no matter what.
ASTERISK-28878 #close
Change-Id: I0f7dc86fd0fb607c308e6f98ede303c54d1eacb6
The outbound proxy for an AOR was not being applied to
any statically configured Contacts. This resulted in the
OPTIONS requests being sent to the wrong target.
This change sets the outbound proxy on statically configured
contacts once the AOR configuration is done being
applied.
ASTERISK-28965
Change-Id: Ia60f3e93ea63f819c5a46bc8b54be2e588dfa9e0
1) Fix memory-leaks
Added code to release ast_events extracted from corosync and stasis messages
2) Clean stasis cache when a member of the corosync cluster leaves the group
Added code to remove from the stasis cache of the members remained on the
group all the messages with the EID of the left member.
If the device states of the left member remain in the stasis cache of other
members, they will not be updated anymore and high priority cached values,
like BUSY, will take precedence over current device states.
3) Stop corosync event propagation when node is not joined to the group
Updated dispatch_thread_handler code to detect when asterisk is not joined
to the corosync group and added some condition in publish_event_to_corosync
code to send corosync messages only when joined.
When a node is not joined its corosync daemon can't send messages:
the cpg_mcast_joined function append new messages to the FIFO buffer until
it's full and then it blocks indefinitely.
In this scenario if the stasis_message_cb callback, registered by
res_corosync to handle stasis messages, try to send a corosync messages,
the thread of the stasis thread-pool will be blocked until the node join
the corosync cluster.
ASTERISK-28888
Reported by: Università di Bologna - CESIA VoIP
Change-Id: Ie8e99bc23f141a73c13ae6fb1948d148d4de17f2
When a re-INVITE is received we create a new set of
streams that are then swapped in as the active streams.
We did not preserve the SDP label from the previous
streams, resulting in the label getting lost.
This change ensures that if an SDP label is present
on the previous stream then it is set on the new stream.
ASTERISK-28953
Change-Id: I9dd63b88b562fe96ce5c791a3dae5bcaca258445
The AMI action and CLI command did not take into account the properties
of full backend caching. This resulted in an expired object remaining
removed until a full backend update occurred, instead of having the
object updated when needed.
This change makes it so that the AMI action and CLI command for object
expire will now fail instead of putting the cache into an undesired
state. If full backend caching is enabled then only operations
which act on the entire cache are available.
ASTERISK-28942
Change-Id: Id662d888f177ab566c8e802ad583083b742d21f4
Integrated STIR/SHAKEN support with outgoing INVITEs. When an INVITE is
sent, the caller ID will be checked to see if there is a certificate
that corresponds to it. If so, that information will be retrieved and an
Identity header will be added to the SIP message. The format is:
header.payload.signature;info=<public_key_url>alg=ES256;ppt=shaken
Header, payload, and signature are all BASE64 encoded. The public key
URL is retrieved from the certificate. Currently the algorithm and ppt
are ES256 and shaken, respectively. This message is signed and can be
used for verification on the receiving end.
Two new configuration options have been added to the certificate object:
attestation and origid. The attestation is required and must be A, B, or
C. origid is the origination identifier.
A new utility function has been added as well that takes a string,
allocates space, BASE64 encodes it, then returns it, eliminating the
need to calculate the size yourself.
Change-Id: I1f84d6a5839cb2ed152ef4255b380cfc2de662b4
This patch makes the usual necessary changes when upgrading to a new
version pjproject. For instance, version number bump, patches removed
from third-party, new *.md5 file added, etc..
This patch also includes a change to the Asterisk pjproject Makefile to
explicitly create the 'source/pjsip-apps/lib' directory. This directory
is no longer there by default so needs to be added so the Asterisk
malloc debug can be built.
This patch also includes some minor changes to Asterisk that were a result
of the upgrade. Specifically, there was a backward incompatibility change
made in 2.10 that modified the "expires header" variable field from a
signed to an unsigned value. This potentially effects comparison. Namely,
those check for a value less than zero. This patch modified a few locations
in the Asterisk code that may have been affected.
Lastly, this patch adds a new macro PJSIP_MINVERSION that can be used to
check a minimum version of pjproject at compile time.
ASTERISK-28899 #close
Change-Id: Iec8821c6cbbc08c369d0e3cd2f14e691b41d0c81
If channelId parameters were passed in the body, the Asterisk doesn't parsing it correctly.
Fixed it to parse the channelId, other_channel_id parameter correclty.
ASTERISK-28948
Change-Id: I59b49161a94869169ee19c1ffab5afcef7026157
The "value" passed in when setting an RTP property determines
whether it should be enabled or disabled. The RTP send and
receive retrans props did not examine this to know if the
buffers should be enabled. They assumed they always should be.
This change makes it so that the "value" passed in is
respected.
ASTERISK-28939
Change-Id: I9244cdbdc5fd065c7f6b02cbfa572bc55c7123dc
When fax_gateway_framehook is called and a gateway hasn't already
been started, the framehook gets the t38 state for both the current
channel and the peer. That call trickles down to the channel
driver which determines the state. If either channel is hung up
(or in the process of being hung up), the channel driver's tech_pvt
is going to be NULL which, in the case of chan_pjsip, will cause a
segfault.
* Added a hangup check for both the channel and peer channel
before starting a fax gateway.
* Added a check for NULL tech_pvt to chan_pjsip_queryoption
so we don't attempt to reference a tech_pvt that's already
gone.
ASTERISK-28923
Reported by: Yury Kirsanov
Change-Id: I4e10e63b667bbb68c1c8623f977488f5d807897c
This patch fixes a few compile warnings/errors that now occur when using gcc
10+.
Also, the Makefile.rules check to turn off partial inlining in gcc versions
greater or equal to 8.2.1 had a bug where it only it only checked against
versions with at least 3 numbers (ex: 8.2.1 vs 10). This patch now ensures
any version above the specified version is correctly compared.
Change-Id: I54718496eb0c3ce5bd6d427cd279a29e8d2825f9
If parameters were passed in the body as JSON to the
create route they were not being parsed before checking
to ensure that required fields were set.
This change moves the parsing so it occurs before
checking.
ASTERISK-28940
Change-Id: I898b4c3c7ae1cde19a6840e59f498822701cf5cf
You cannot cast a pjsip_uri to a pjsip_sip_uri using pjsip_uri_get_uri,
without checking that it's a PJSIP_URI_SCHEME_IS_SIP(S).
ASTERISK-28936
Change-Id: I9f572b3677e4730458e9402719e580f8681afe2a
Integrated STIR/SHAKEN support with incoming INVITES. Upon receiving an
INVITE, the Identity header is retrieved, parsing the message to verify
the signature. If any of the parsing fails,
AST_STIR_SHAKEN_VERIFY_NOT_PRESENT will be added to the channel for this
caller ID. If verification itself fails,
AST_STIR_SHAKEN_VERIFY_SIGNATURE_FAILED will be added. If anything in
the payload does not line up with the SIP signaling,
AST_STIR_SHAKEN_VERIFY_MISMATCH will be added. If all of the above steps
pass, then AST_STIR_SHAKEN_VERIFY_PASSED will be added, completing the
verification process.
A new config option has been added to the general section for
stir_shaken.conf. "signature_timeout" is the amount of time a signature
will be considered valid. If an INVITE is received and the amount of
time between when it was received and when it was signed is greater than
signature_timeout, verification will fail.
Some changes were also made to signing and verification. There was an
error where the whole JSON string was being signed rather than the
header combined with the payload. This has been changed to sign the
correct thing. Verification has been changed to do this as well, and the
unit tests have been updated to reflect these changes.
A couple of utility functions have also been added. One decodes a BASE64
string and returns the decoded string, doing all the length calculations
for you. The other retrieves a string value from a header in a rdata
object.
Change-Id: I855f857be3d1c63b64812ac35d9ce0534085b913
In a particular fax gateway scenario whereby it would
have to translate using the read translation path on a
channel the frame being translated would be consumed.
When the frame is in the write path it is not permitted
to free the frame as the caller expects it to continue
to exist.
This change makes it so that the frame is only consumed
on the read path where it is acceptable to free it.
ASTERISK-28900
Change-Id: I011c321288a1b056d92b37c85e229f4a28ee737d
When writing tx messages to pcap files, Asterisk is using the wrong
pointer resulting in lots of wasted space. This patch fixes it to use
the correct pointer.
ASTERISK-28932 #close
Change-Id: I5b8253dd59a083a2ca2c81f232f1d14d33c6fd23
files
fwrite() does return the number of elements written and not the
number of bytes. However asterisk is currently comparing the return
value to the size of the written element what means that asterisk logs
five WARNING messages on every packet written to the pcap file.
This patch changes the code to check for the correct value, which will
always be 1.
ASTERISK-28921 #close
Change-Id: I2455032d9cb4c5a500692923f9e2a22e68b08fc2
When replacing the user portion of the Contact URI the code
was using the ephemeral pool instead of the tdata pool. This
could cause the Contact user value to become invalid after a
period of time.
The code will now use the tdata pool which persists for the
lifetime of the message instead.
ASTERISK-28794
Change-Id: I31e7b958e397cbdaeedd0ebb70bcf8dd2ed3c4d5
While asterisk is filtering out the x-ast-orig-host parameter from the
contact on response messages, it is not filtering it out from the
request URI and the to header on SIP requests (for example INVITE).
ASTERISK-28884 #close
Change-Id: Id032b33098a1befea9b243ca994184baecccc59e
When a configuration file in Asterisk is loaded
information about it is stored such that on a
reload it is not reloaded if nothing has changed.
This can be problematic when an error exists in
a configuration file in PJSIP since the error
will be output at start and not subsequently on
reload if the file is unchanged.
This change makes it so that if an error is
encountered when res_sorcery_config is loading
a configuration file a reload will always read
in the configuration file, allowing the error
to be seen easier.
Change-Id: If2e05a017570f1f5f4f49120da09601e9ecdf9ed
The flags of a previous selection could have been set within the
object 'srtp', for example, when the previous selection returned
failure after setting just 'some' flags. Now, not to clutter the
code, all possible flags are cleared first, and then the selected
flags are set as before.
ASTERISK-28903
Change-Id: I1b9d7aade7d5120244ce7e3a8865518cbd6e0eee
Added two unit tests, one for signing and another for verifying.
stir_shaken_sign checks to make sure that all the required parameters
are passed in and then signs the actual payload. If a signature is
produced and a payload returned as a result, the test passes.
stir_shaken_verify takes the signature from a signed payload to verify.
This unit test also verifies that all the required information is passed
in, and then attempts to verify the signature. If verification is
successful and a payload is returned, the test passes.
Change-Id: I9fa43380f861ccf710cd0f6b6c102a517c86ea13
The PJSIP packet logger now has the following CLI commands:
pjsip set logger pcap <filename>
When used this will create a pcap file containing the incoming
and outgoing SIP packets, in unencrypted form.
pjsip set logger verbose <on / off>
This allows you to toggle logging to verbose on and off.
pjsip set logger host <IP/subnet mask> add
This allows you to add an additional IP address or subnet
mask to logging, allowing you to log multiple instead of
just a single IP address or all traffic.
The normal "pjsip set logger host" CLI command has also been
expanded to allow subnet masks as well.
ASTERISK-28895
Change-Id: If5859161a72b0d7dd2d1f92d45bed88e0cd07d0e
A warning was triggered that there may be a problem regarding file
extension (which is correct and should not be set anyway). The warning
also appeared if there was dot within the path itself.
E.g.
[sales-queue-hold]
mode=playlist
entry=/var/www/domain.tld/moh/funky_music
The music played correctly but you get a warning message.
Now there will be a check if the position of a potential dot character
is after the last position of a slash character. This dot charachter
will be treated as a extension naming. Dots within the path then ignored.
ASTERISK-28892
Reported-By: Nicholas John Koch
Change-Id: I2ec35a613413affbf5fcc01c8c181eba24865b9e
This change adds the same variable functionality that
is available for originating a channel to the create
call. Now when creating a channel you can specify
dialplan variables to set instead of having to do another
API call.
ASTERISK-28896
Change-Id: If13997ba818136d7c070585504fc4164378aa992
1. Modify sip_resolve and sip_resolve_callback to request AAAA lookups
when an IPV6 transport type has been requested.
2. Rename all occurrences of pjsip_transport_get_type_name to
pjsip_transport_get_type_desc. This ensures that the log/debug info
shows whether the transport is IPv6 or IPv4.
3. Do not add the constant PJSIP_TRANSPORT_IPV6 to existing transport
types. This results in invalid values. Use a bitwise or instead.
ASTERISK-26780
Patches:
pjsip_resolver.c uploaded by Peter Sokolov (License #7070)
Change-Id: I8b1e298f8efa682d0a7644113258fe76d9889c58
Adds the "STIR_SHAKEN" dialplan function and an API call to add a
STIR_SHAKEN verification result to a channel. This information will be
held in a datastore on the channel that can later be queried through the
"STIR_SHAKEN" dialplan funtion to get information on STIR_SHAKEN results
including identity, attestation, and verify_result. Here are some
examples:
STIR_SHAKEN(count)
STIR_SHAKEN(0, identity)
STIR_SHAKEN(1, attestation)
STIR_SHAKEN(2, verify_result)
Getting the count can be used to iterate through the results and pull
information by specifying the index and the field you want to retrieve.
Change-Id: Ice6d52a3a7d6e4607c9c35b28a1f7c25f5284a82
Changed source and destination address fields in struct
pjsip_history_entry so that they are long enough to hold an IPv6
address.
ASTERISK-28854
Change-Id: Id65bb9aa961e9ecbcb500815e18170f774e34d3e
There are a lot of moving parts in this patch, but the focus of it is on
the verification of the signature using a public key located at the
public key URL provided in the JSON payload. First, we check the
database to see if we have already downloaded the key. If so, check to
see if it has expired. If it has, redownload from the URL. If we don't
have an entry in the database, just go ahead and download the public
key. The expiration is tested each time we download the file. After
that, read the public key from the file and use it to verify the
signature. All sanity checking is done when the payload is first
received, so the verification is complete once this point is reached.
The XML has also been added since a new config option was added to
general (curl_timeout). The maximum amount of time to wait for a
download can be configured through this option, with a low value by
default.
Change-Id: I3ba4c63880493bf8c7d17a9cfca1af0e934d1a1c
Recently code accessing nochecksums variable has been added without including #ifdef SO_NO_CHECK protection, while the variable is created only when such constant is defined.
ASTERISK-28852 #close
Change-Id: I381718893b80599ab8635f2b594a10c1000d595e
Some places in Asterisk did not treat the formats on a stream
as immutable when they are.
The ast_stream_get_formats function is now const to enforce this
and parts of Asterisk have been updated to take this into account.
Some violations of this were also fixed along the way.
An additional minor tweak is that streams are now allocated with
an empty format capabilities structure removing the need in various
places to check that one is present on the stream.
ASTERISK-28846
Change-Id: I32f29715330db4ff48edd6f1f359090458a9bfbe
Fixed it to copy the entire string from the requested endpoint body except tech-prefix.
ASTERISK-28847
Change-Id: I91b5f6708a1200363f3267b847dd6a0915222c25
This change fixes a few re-negotiation issues
uncovered with fax.
1. The fax support uses its own mechanism for
re-negotiation by conveying T.38 information in
its own frames. The new support for re-negotiating
when adding/removing/changing streams was also
being triggered for this causing multiple re-INVITEs.
The new support will no longer trigger when
transitioning between fax.
2. In off-nominal re-negotiation cases it was
possible for some state information to be left
over and used by the next re-negotiation. This
is now cleared.
ASTERISK-28811
ASTERISK-28839
Change-Id: I8ed5924b53be9fe06a385c58817e5584b0f25cc2
MODULEINFO is checked while buidling/linking the module.
AST_MODULE_INFO is checked while loading/running the module.
ASTERISK-28838
Change-Id: I4bb868532ca217fec1351885d99eb55c21b58042
When the receive buffer was flushed by a received packet while it
already contained a packet with the same sequence number, Asterisk
never left the while loop which tried to order the packets.
This change makes it so if the packet is in the receive buffer it
is retrieved and freed allowing the buffer to empty.
ASTERISK-28827
Change-Id: Idaa376101bc1ac880047c49feb6faee773e718b3
When the ast_data_buffer_put rejects to add a packet, for example because
the buffer already contains a packet with the same sequence number, the
payload will never be freed, resulting in a memory leak.
The data buffer will now return an error if this situation occurs
allowing the caller to free the payload. The res_rtp_asterisk module
has also been updated to do this.
ASTERISK-28826
Change-Id: Ie6c49495d1c921d5f997651c7d0f79646f095cf1
By using pjproject to give us a list of candidates, and then filtering,
if the host has >32 addresses configured, then it is possible that we
end up filtering out all 32 of those, and ending up with no candidates
at all. Instead, get getifaddrs (which pjsip is using underlying
anyway) to retrieve all local addresses, and iterate those, adding the
first 32 addresses not excluded by the ICE ACL.
In our setup at any point in time We've got between 6 and 328 addresses
on any given system. The lower limit is the lower limit but the upper
limit is growing on a near daily basis currently.
Change-Id: I109eaffc3e2b432f00bf958e3caa0f38cacb4edb
Signed-off-by: Jaco Kroon <jaco@uls.co.za>
This reverts commit a3a2fbaec6.
Reason for revert: There is a lot of code that relies on the broken
behavior that this fixes.
Change-Id: I410c395a0168acbdaf89e616e3cb5e1312d190cb
When an AOR is modified endpoints are updated that reference
the AOR so they can start receiving updates and reflect the
correct state. If this is the case then we shouldn't change
the endpoint to be offline if it does not reference the AOR
but instead only when the endpoint is completely updated for
all its AORs.
ASTERISK-28056
patches:
pjsip_options-aor.diff submitted by jhord (license 6978)
Change-Id: I3ee00023be2393113cd4e056599f23f3499ef164
This unit test runs through combinations of...
* Local codecs
* Remote Codecs
* Codec Preference
* Incoming/Outgoing
A few new APIs were created to make it easier to test
the functionality but didn't result in any actual
functional change.
ASTERISK_28777
Change-Id: Ic8957c43e7ceeab0e9272af60ea53f056164f164
Based on this new endpoint setting, a joint list of preferred codecs
between those received from the Asterisk core (remote), and those
specified in the endpoint's "allow" parameter (local) is created and
is used to create the outgoing SDP offer.
* Add outgoing_call_offer_pref to pjsip_configuration (endpoint)
* Add "call_direction" to res_pjsip_session.
* Update pjsip_session_caps.c to make the functions more generic
so they could be used for both incoming and outgoing.
* Update ast_sip_session_create_outgoing to create the
pending_media_state->topology with the results of
ast_sip_session_create_joint_call_stream().
* The endpoint "preferred_codec_only" option now automatically sets
AST_SIP_CALL_CODEC_PREF_FIRST in incoming_call_offer_pref.
* A helper function ast_stream_get_format_count() was added to
streams to return the current count of formats.
ASTERISK-28777
Change-Id: Id4ec0b4a906c2ae5885bf947f101c59059935437
This change provides functions that take in a JSON payload, verify that
the contents contain all the mandatory fields and required values (if
any), and signs the payload with the private key. Four fields are added
to the payload: x5u, attest, iat, and origid. As of now, these are just
placeholder values that will be set to actual values once the logic is
implemented for what to do when an actual payload is received, but the
functions to add these values have all been implemented and are ready to
use. Upon successful signing and the addition of those four values, a
ast_stir_shaken_payload is returned, containing other useful information
such as the algorithm and signature.
Change-Id: I74fa41c0640ab2a64a1a80110155bd7062f13393
RFC5621 requires any content type with a Content-Disposition
with handling=required to be rejected with a 415 response
ASTERISK-28782 #close
Change-Id: Iad969df75936730254b95c1a8bc3b48497070bb4
When an outgoing channel is created a list of formats may
optionally be provided which is used as a request that the
formats be used if possible. If an endpoint is not configured
for any of the formats we ignore this request and use what is
configured. This has the side effect of also including other
stream types (such as video) that were not present in the
requested formats.
This change makes it so that the intention of the request is
preserved - that is if only an audio format is requested then
even if there is no joint audio format between the request and
the configuration we will still only place an audio stream in
the outgoing call.
ASTERISK-28787
Change-Id: Ia54c0c63e94aca176169b9bae4bb8a8380ea245f
This commit sets up some of the initial framework for the module and
adds a way to read the private key from the specified file, which will
then be appended to the certificate object. This works fine for now, but
eventually some other structure will likely need to be used to store all
this information. Similarly, the caller_id_number is specified on the
certificate config object, but in the end we will want that information
to be tied to the certificate itself and read it from there.
A method has been added that will retrieve the private key associated
with the caller_id_number passed in. Tab completion for certificates and
stores has also been added.
Change-Id: Ic4bc1416fab5d6afe15a8e2d32f7ddd4e023295f
When examining a stream to determine hold/unhold information we
only care about the default audio stream. Other streams aren't
used for hold/unhold.
ASTERISK-28784
Change-Id: I7a1f10f07822c4aee1f98a38b9628849b578afe4
When the Asterisk receives 200 OK with invalid SDP,
the Asterisk/PJPROJECT terminating the session.
But if the channel was in the Bridge, Asterisk tries send
the Re-Invite before terminating the session.
And when the Asterisk sending the Re-Invite, it doesn't check
the SDP is NULL or not. This crashes the Asterisk.
Fixed it to close the session correctly if the UAS sends the
200 OK with wrong SDP.
ASTERISK-28743
Change-Id: Ifa864e0e125b1a7ed2f3abd4164187e1dddc56da
The state of the default audio stream is used for hold/unhold so we
restrict it to sendrecv as the core does not handle when it changes as
a result of hold/unhold.
This restriction does not apply to other media types though so we now
only restrict it to audio. This allows the other default streams to
store their state at all values, and not just sendrecv and removed.
ASTERISK-28783
Change-Id: I139740f38cea7f7d92a876ec2631ef50681f6625
Do not hang up a PJSIP channel on RTP timeout if that channel is in
a direct-media bridge. Also reset the time of the last received RTP packet when
direct-media ends (wait full rtp_timeout period before checking first time after
audio came back to Asterisk).
ASTERISK-28774
Reported-by: Michael Neuhauser
Change-Id: I8b62012be7685849e8fb2b1c5dd39d35313ca2d1
A pure blacklist is not good enough, we need a whitelist mechanism as
well, and the simplest way to do that is to re-use existing ACL
infrastructure.
This makes it simpler to blacklist say an entire block (/24) except a
smaller block (eg, a /29 or even a /32). Normally you'd need to
recursively split the block, so if you want to blacklist a /24 except
for a /29 you'd end up with a blacklit for a /25, /26, /27 and /28. I
feel that having an ACL instead of a blacklist only is clearer.
Change-Id: Id57a8df51fcfd3bd85ea67c489c85c6c3ecd7b30
Signed-off-by: Jaco Kroon <jaco@uls.co.za>
bridge_p2p_rtp_write will forward rtp to the bridged rtp instance
without modifying the ssrc. However, it is not updating the SSRC
in the bridged rtp. Thus, when SSRC packets are generated, they
have the correct SSRC for the sender.
ASTERISK-28773 #close
Change-Id: I39f923bde28ebb4f0fddc926b92494aed294a478
If ICE support is enabled but not negotiated, the rtp->ice structure is
not being destroyed. This leads to Asterisk waiting for ICE to complete
instead of immediately starting the DTLS handshake, resulting in the
call leg having no RTP.
ASTERISK-28769 #close
Change-Id: I17c137546dc9ecfb9583c24dcf4c2ced8bbd7a27
This change introduce a CLI command for the RTP to display the general
configuration.
In the first step add the follow fields of the configurations:
- rtpstart
- rtpend
- dtmftimeout
- rtpchecksum
- strictrtp
- learning_min_sequential
- icesupport
Change-Id: Ibe5450898e2c3e1ed68c10993aa1ac6bf09b821f
Add a new option, incoming_call_offer_pref, to res_pjsip endpoints that
specifies the preferred order of codecs after receiving an offer.
This patch does the following:
Adds a new enumeration, ast_sip_call_codec_pref, used by the the new
configuration option that's added to the endpoint media structure.
Adds a new ast_sip_session_caps structure that's set for each session media
object.
Creates a new file, res_pjsip_session_caps that "implements" the new
structure and option, and is compiled into the res_pjsip_session library.
ASTERISK-28756 #close
Change-Id: I35e7a2a0c236cfb6bd9cdf89539f57a1ffefc76f
The receive buffer will now grow if we end up flushing the
receive queue after not receiving the expected packet in time.
This is done in hopes that if this is encountered again the
extra buffer size will allow more time to pass and any missing
packets to be received.
The send buffer will now grow if we are asked for packets and
can't find them. This is done in hopes that the packets are
from the past and have simply been expired. If so then in
the future with the extra buffer space the packets should be
available.
Sequence number cycling has been handled so that the
correct sequence number is calculated and used in
various places, including for sorting packets and
for determining if a packet is old or not.
NACK sending is now more aggressive. If a substantial number
of missing sequence numbers are added a NACK will be sent
immediately. Afterwards once the receive buffer reaches 25%
a single NACK is sent. If the buffer continues to grow and
reaches 50% or greater a NACK will be sent for each received
future packet to aggressively ask the remote endpoint to
retransmit.
ASTERISK-28764
Change-Id: I97633dfa8a09a7889cef815b2be369f3f0314b41
When a text message was received any associated variable was not written to
the ARI TextMessageReceived event. This occurred because Asterisk only wrote
out "send" variables. However, even those "send" variables would fail ARI
validation due to a TextMessageVariable formatting bug.
Since it seems the TextMessageReceived event has never been able to include
actual variables it was decided to remove the TextMessageVariable object type
from ARI, and simply return a JSON object of key/value pairs for variables.
This aligns more with how the ARI sendMessage handles variables, and other
places in ARI.
ASTERISK-28755 #close
Change-Id: Ia6051c01a53b30cf7edef84c27df4ed4479b8b6f
Update the state of remote_hold immediately on receipt of remote
SDP so that the information is available when building the SDP
answer
ASTERISK-28754 #close
Change-Id: I7026032a807e9c95081cb8f060400b05deb4836f
This change extends the Sorcery API to allow a wizard to be
told to explicitly reload objects or a specific object type
even if the wizard believes that nothing has changed.
This has been leveraged by res_pjsip and res_pjsip_acl to
reload endpoints and PJSIP ACLs when a named ACL changes.
ASTERISK-28697
Change-Id: Ib8fee9bd9dd490db635132c479127a4114c1ca0b
In order to retry outbound registrations for some situations, we
need access to the tdata from the original request. For instance,
for 401/407 responses we need it to properly construct the
subsequent request with the authentication. We also need it if
we're iterating over a DNS SRV response record set so we can skip
entries we've already tried.
We've been getting the tdata from the server response rdata and
transaction but that only works for the failures where there was
actually a response (4XX, 5XX, etc). For timeouts there's no
response and therefore no rdata or transaction from which to get
the tdata. When processing a single A/AAAA record for a server,
this wasn't an issue as we just retried that same server after the
retry timer expired. If we got an SRV record set for the server
though, without the state from the tdata, we just kept trying the
first entry in the set repeatedly instead of skipping to the next
one in the list.
* Added a "last_tdata" member to the client state structure to keep
track of the sent tdata.
* Updated registration_client_send() to save the tdata it used into
the client_state.
* Updated sip_outbound_registration_response_cb() to use the tdata
saved in client_state when we don't get a response from the
server. We still use the tdata from the transaction when we DO
get a response from the server so we can properly handle 4XX
responses where our new request depends on it.
General note on timeouts:
Although res_pjsip_outbound_registration skips to the next record
immediately when a timeout occurs during SRV set traversal, it's
pjproject that determines how long to wait before a timeout is
declared. As with other SIP message types, pjproject will continue
trying the same server at an interval specified by "timer_t1" until
"timer_b" expires. Both of those timers are set in the pjsip.conf
"system" section.
ASTERISK-28746
Change-Id: I199b8274392d17661dd3ce3b4d69a3968368fa06
This change adds support to bridge_softmix to allow the addition
and removal of additional video source streams. When such a change
occurs each participant is renegotiated as needed to reflect the
update. If another video source is added then each participant
gets another source. If a video source is removed then it is
removed from each participant. This functionality allows you to
have both your webcam and screenshare providing video if you
desire, or even more streams. Mapping has been changed to use
the topology index on the source channel as a unique identifier
for outgoing participant streams, this will never change and
provides an easy way to establish the mapping.
The bridge_simple and bridge_native_rtp modules have also been
updated to renegotiate when the stream topology of a party changes
allowing the same behavior to occur as added to bridge_softmix.
If a screen share is added then the opposite party is renegotiated.
If that screen share is removed then the opposite party is
renegotiated again.
Some additional fixes are also included in here. Stream state is
now conveyed in SDP so sendonly/recvonly/inactive streams can
be requested. Removed streams now also remove previous state
from themselves so consumers don't get confused.
ASTERISK-28733
Change-Id: I93f41fb41b85646bef71408111c17ccea30cb0c5
When handling ICE negotiations, it's possible that there can be a delay
between STUN binding requests which in turn will cause a delay in ICE
completion, preventing media from flowing. It should be possible to send
media when there is at least one valid pair, preventing this scenario
from occurring.
A change was added to PJPROJECT that adds an optional callback
(on_valid_pair) that will be called when the first valid pair is found
during ICE negotiation. Asterisk uses this to start the DTLS handshake,
allowing media to flow. It will only be called once, either on the first
valid pair, or when ICE negotiation is complete.
ASTERISK-28716
Change-Id: Ia7b68c34f06d2a1d91c5ed51627b66fd0363d867
When moh_passthrough is used, asterisk is only generating invites
of type sendonly and sendrecv instead of taking fully into account
the on hold state of the local and remote parties
ASTERISK-28738 #close
Change-Id: Iaaad9fbc033cb14803d433b8a4071bc337047761
There was a race condition between client initiated DTLS setup, and handling
of server side ice completion that caused the underlying SSL object to get
cleared during DTLS initialization. If this happened Asterisk would be left
in a partial DTLS setup state. RTP packets were sent and received, but were
not being encrypted and decrypted. This resulted in no audio, or static.
Specifically, this occurred when '__rtp_recvfrom' was processing the handshake
sequence from the client to the server, and then 'ast_rtp_on_ice_complete'
gets called from another thread and clears the SSL object when calling the
'dtls_perform_setup' function. The timing had to be just right in the sense
that from the external SSL library perspective SSL initialization completed
(rtp recv), Asterisk clears/resets the SSL object (ice done), and then checks
to see if SSL is intialized (rtp recv). Since it was cleared, Asterisk thinks
it is not finished, thus not completing 'dtls_srtp_setup'.
This patch removes calls to 'dtls_perform_setup', which clears the SSL object,
in 'ast_rtp_on_ice_complete'. When ice completes, there is no reason to clear
the underlying SSL object. If an ice candidate changes a full protocol level
renegotiation occurs. Also, in the case of bundled ICE candidates are reused
when a stream is added. So no real reason to have to clear, and reset in this
instance.
Also, this patch adds a bit of extra logging to aid in diagnosis of any future
problems.
ASTERISK-28742 #close
Change-Id: I34c9e6bad5a39b087164646e2836e3e48fe6892f
The change to res_config_odbc that allowed empty strings to be
returned to realtime consumers¹ causes a warning to be emitted when
loading MoH classes. So we need to treat an empty 'format' as if it
was not specified to avoid the warning.
ASTERISK-28735 #close
Reported by: Ross Beer
[1] https://gerrit.asterisk.org/c/asterisk/+/13722
Change-Id: I9a271d721e1a0973e80ebe7d75b46a0d8fa0e5a5
Given a scenario where session refreshes occur close to
each other while another is finishing it was possible for
the session refreshes to occur out of order. It was
also possible for session refreshes to be delayed for
quite some time if a session refresh did not result in
a topology change.
For the out of order session refreshes the first session
refresh would be queued due to a transaction in progress.
This transaction would then finish. When finished a
separate task to process the delayed requests queue
would be queued for handling. A second refresh would
be requested internally before this delayed request
queued task was processed. As no transaction was in
progress this session refresh would be immediately
handled before the queued session refresh.
The code will now check if any delayed requests exist
before allowing a session refresh to immediately occur.
If any exist then the session refresh is queued.
For the delayed session refreshes if a session refresh
did not result in a topology change the attempt would
be immediately stopped and no other delayed requests would
be processed.
The code will now go through the entire delayed requests
queue until a delayed request results in a request
actually being sent.
ASTERISK-28730
Change-Id: Ied640280133871f77d3f332be62265e754605088
The code assumed that when the transport-cc feedback
function was called at least one packet will have been
received. In practice this isn't always true, so now
we just reschedule the sending and do nothing.
Change-Id: Iabe7b358704da446fc3b0596b847bff8b8a0da6a
When res_config_odbc (and perhaps other realtime backends) reads a SQL
NULL from the database, it coalesces the value to the empty string
which prevents it from being returned to the realtime core.
However, if it instead reads the empty string from the database, it
needs a way to encode that fact without having the value omitted
entirely. It does this by changing the value to a string with a single
space. The realtime code in main/config.c recognizes this special case
and _turns the string back into the empty string_ before passing it to
realtime API consumers.
For all of this to work, we need to ensure that we actually pass the
single-space-string back to the realtime core, which is currently
failing because we are trimming the value before checking its
content. So instead we now special case the single-space-string case
so that empty values are returned properly.
ASTERISK-28719 #close
Reported by: EDV O-TON
Change-Id: I673ed8c31ad037aa224e80c78c7a1dc4e4a4e3de
Incrementing stasis_app_playback.media_index directly in our playback
loop means that when we reach the end of our playlist the index into
the vector will be outside of the bounds of the vector.
Instead use a temporary variable and only assign when we're sure that
we are in bounds.
ASTERISK-28713 #close
Reported by: Sébastien Duthil
Change-Id: Ib53f7f156097e0607eb5871d9d78d246ed274928
Each subscription needs to have a reference to the persisted data
for it, as well as the main JSON contained within the tree. When
recreating a subscription this did not occur and they both shared
the same reference.
ASTERISK-28714
Change-Id: I706abd49ea182ea367a4ac3feca2706460ae9f4a
Calling 'app_send' eventually calls the app's message handler. It's possible
for a handler to obtain a lock on another object, and then need/want to lock
the app object. If the caller of 'app_send' locks the app object prior to
calling then there's a potential for a deadlock, if another thread calls
'app_send' without locking.
This patch makes it so 'app_send' is not called with the app object locked in
the section of code doing such.
ASTERISK-28423 #close
Change-Id: I6767c6d0933c7db1b984018966eefca4c0638a27
The cleanup code in stasis shuts down applications if they are in a deactivated
state, and no longer have explicit subscriptions. When registering an app the
cleanup code was running before calling 'update'. When it should be executed
after 'update' since a call to register may re-activate the app. We don't want
it to shutdown before the 'update' otherwise the app won't be re-activated,
or registered.
This patch makes it so the cleanup code is executed post 'update'.
ASTERISK-28679 #close
Change-Id: I8f2c0b17e33bb8128441567b97fd4c7bf74a327b
We need to wait for the message sending callback to finish to know if
we succeeded or failed.
ASTERISK-25421 #close
Reported by: Dmitriy Serov
Change-Id: I22b954398821d2caf4c6fe58f0607c8cfa378059
The change in 9b99ef50b5 updated the
syntax of the 'realtime update2' CLI command but did not correctly
update the calls to ast_update2_realtime().
The issue this addresses was originally opened because we aren't
allowing a SQL NULL to be set as part of the update, but this is a
limitation of the Realtime API and is not a bug.
Additionally, this patch:
* Corrects the example in the command documentation to reflect
'update2' instead of 'update.'
* Fixes the leading spacing of the command documentation.
* Checks that the required 'NULL' literal argument is present where we
expect it to be.
ASTERISK-21794 #close
Reported by: Cédric Bassaget
Change-Id: Idda63a5dc50d5f9bcb34c27ea3238d90f733b2cd
This commit adds support for
[AudioSocket](
https://wiki.asterisk.org/wiki/display/AST/AudioSocket),
a very simple bidirectional audio streaming protocol. There are both
channel and application interfaces.
A description of the protocol can be found on the above referenced
GitHub page. A short talk about the reasons and implementation can be
found on [YouTube](https://www.youtube.com/watch?v=tjduXbZZEgI), from
CommCon 2019.
ARI support has also been added via the existing "externalMedia" ARI
functionality. The UUID is specified using the arbitrary "data" field.
ASTERISK-28484 #close
Change-Id: Ie866e6c4fa13178ec76f2a6971ad3590a3a588b5
Some body generators, such as dialog-info+xml, require storing state
information which is then conveyed in the NOTIFY request itself. Up
until now there was no way for such body generators to persist this
information.
Two new API calls have been added to allow body generators to set and
get persisted data. This data is persisted out alongside the normal
persistence information and allows the body generator to restore
state information or to simply use this for normal storage of state.
State is stored in the form of JSON and it is up to the body
generator to interpret this as needed.
The dialog-info+xml body generator has been updated to take advantage
of this to persist the version number.
ASTERISK-27759
Change-Id: I5fda56c624fd13c17b3c48e0319b77079e9e27de
Adds source port matching support when IP matching is used:
[example]
type = identify
match = 1.2.3.4:5060/32, 1.2.3.4:6000/32, asterisk.org:4444
If the IP matches but the source port does not, we reject and search for
alternatives. SRV lookups are still performed if enabled (srv_lookups = yes),
unless the configured FQDN includes a port number in which case just a host
lookup is performed.
ASTERISK-28639 #close
Reported by: Mitch Claborn
Change-Id: I256d5bd5d478b95f526e2f80ace31b690eebba92
ast_sorcery_changeset_create() is not commutative and will fail to detect
differences between two variable lists depending on what changed, so switch to
ast_variable_lists_match().
ASTERISK-28492 #close
Reported by: Jean-Denis Girard
Change-Id: I7b3256983ddfaa2138d3de92a444a53b5193a4e1
When TLS is in use, checking the readiness of the underlying FD is insufficient
for determining if there is data available to be read. So before polling the
FD, check if there is any buffered data in the TLS layer and use that first.
ASTERISK-28562 #close
Reported by: Robert Sutton
Change-Id: I95fcb3e2004700d5cf8e5ee04943f0115b15e10d
This patch adds a new flag "inhibitConnectedLineUpdates" to the 'addChannel'
operation in the Bridges REST API. When set, this flag avoids generating COLP
frames when the specified channels enter the bridge.
ASTERISK-28629
Change-Id: Ib995d4f0c6106279aa448b34b042b68f0f2ca5dc
A previous review, 13174, made a change whereby on an incoming offer SDP
the pending topology was initialized to the configured. This caused a problem
for bundle with WebRTC where bundle could reference a stream that did not
actually exist if the configuration had both audio and video but the
offer SDP only contained audio.
This change undoes that review and instead fixes the original problem it
sought to solve by setting the state of created streams based on the
contents of the offer SDP. This way the stream state is not inactive
until negotiation later completes.
ASTERISK-28659
Change-Id: Ic5ae5a86437d3e686ac5afd91d133cc916198355
A previous patch:
Gerrit Change-Id: I73bb24799bfe1a48adae9c034a2edbae54cc2a39
made it so a T.38 Gateway tries to negotiate with both sides by sending T.38
negotiation request to both endpoints supported T.38 versus the previous
behavior of forwarding negotiation to the "other" channel once a preamble
was detected.
This had the unfortunate side effect of breaking some setups. Specifically
ones that set the max datagram option on an endpoint configuration (configured
max datagram was not propagated since Asterisk now initiates negotiations).
This patch adds a configuration option, "negotiate_both", that when enabled
makes it so Asterisk initiates the negotiation requests to both endpoints vs.
the previous behavior of waiting, and forwarding the request.
The default is disabled keeping with the old behavior.
ASTERISK-28660
Change-Id: I5deb875f3485e20bc75119ec743090655d864a1a
In Asterisk 16+, there are a few places in ast_rtp_read where we've
allocated a frame list but return a null frame instead of the list.
In these cases, any frames left in the list won't be freed. In the
vast majority of the cases, the list is empty when we return so
there's nothing to free but there have been leaks reported in the
wild that can be traced back to frames left in the list before
returning.
The escape paths now all have logic to free frames left in the
list.
ASTERISK-28609
Reported by: Ted G
Change-Id: Ia1d7075857ebd26b47183c44b1aebb0d8f985f7a
RFC3261 Section 10 "Registrations", specifically paragraph
"10.2.4: Refreshing Bindings", states that a user agent compares
each contact address (in a 200 REGISTER response) to see if it
created the contact. If the Asterisk endpoint has the
rewrite_contact option set however, the contact host and port sent
back in the 200 response will be the rewritten one and not the
one sent by the user agent. This prevents the user agent from
matching its own contact. Some user agents get very upset when
this happens and will not consider the registration successful.
While this is rare, it is acceptable behavior especially if more
than 1 user agent is allowed to register to a single endpoint/aor.
This commit updates res_pjsip_nat (where rewrite_contact is
implemented) to store the original incoming Contact header in
a new "x-ast-orig-host" URI parameter before rewriting it, and to
restore the original host and port to the Contact headers in the
outgoing response.
This is only done if the request is a REGISTER and rewrite_contact
is enabled.
pjsip_message_filter was also updated to ensure that if a request
comes in with any existing x-ast-* URI parameters, we remove them
so they don't conflict. Asterisk will never send a request
with those headers in it but someone might just decide to add them
to a request they craft and send to Asterisk.
NOTE: If a device changes its contact address and registers again,
it's a NEW registration. If the device didn't unregister the
original registration then all existing behavior based
on aor/remove_existing and aor/max_contacts apply.
ASTERISK-28502
Reported-by: Ross Beer
Change-Id: Idc263ad2d2d7bd8faa047e5804d96a5fe1cd282e
The simple fix here is simply to NULL out username and password after we call
ast_free on them. Unfortunately, I noticed that we weren't checking for
allocation failures for username and password, and adding those checks made
things noisy and cumbersome.
So instead we partially rollback the recent LGTM patch, and move the alloca
calls into find_aor_name().
ASTERISK-28641 #close
Reported by: Ross Beer
Change-Id: Ic9d01624e717a020be0b0aee31f0814e7f1ffbe2
We're appropriately sizing the id_domain_alias buffer, but then copying the data
into the id_domain one. We were then using the uninitialized id_domain_alias
buffer we just allocated.
This is ASTERISK~28641 adjacent, but significant enough to warrant its own
patch.
Change-Id: I81c38724d18deab8c6573153e2b99dbb6e2f33d9
We need to copy the endpoint name before we call ao2_cleanup() on it,
otherwise we might try to access memory that has been reclaimed.
ASTERISK-28445 #close
Reported by: Bernhard Schmidt
Change-Id: I404b952608aa606e0babd3c4108346721fb726b3
if asterisk offer T38 SDP with none error correction scheme and
the endpoint respond with redundancy EC scheme, asterisk switch
to that mode. Since we configure the endpoint as none EC mode
we should not switch to any other mode except none.
following logic implemented in code.
1. If asterisk offer none, and anything except none in answer
will be ignored.
2. If asterisk offer fec, answer with fec, redundancy and none will
be accepted.
3. If asterisk offer redundancy, answer with redundancy and none
will be accepted.
ASTERISK-28621
Change-Id: I343c62253ea4c8b7ee17abbfb377a4d484a14b19
Fixes: error: ‘domain_name’ may be used uninitialized in this function
Found with gcc (Ubuntu 9.2.1-9ubuntu2) 9.2.1 20191008
Change-Id: I44413b49ea1205aa25538142161deb73883c79e8
OpenSSL can not tolerate if the packet sent out does not
match the length that it provided to the sender. This change
lies and says that each time the full packet was sent. If
a problem does occur then a retransmission will occur as
appropriate.
ASTERISK-28576
Change-Id: Id42455b15c9dc4eb987c8c023ece6fbf3c22a449
This patch fixes several issues reported by the lgtm code analysis tool:
https://lgtm.com/projects/g/asterisk/asterisk
Not all reported issues were addressed in this patch. This patch mostly fixes
confirmed reported errors, potential problematic code points, and a few other
"low hanging" warnings or recommendations found in core supported modules.
These include, but are not limited to the following:
* innapropriate stack allocation in loops
* buffer overflows
* variable declaration "hiding" another variable declaration
* comparisons results that are always the same
* ambiguously signed bit-field members
* missing header guards
Change-Id: Id4a881686605d26c94ab5409bc70fcc21efacc25
resource_events:stasis_app_message_handler() was locking the session,
then attempting to determine if the app had debug enabled which
locked the app_registry container. res_stasis:__stasis_app_register
was locking the app_registry container then calling app_update
which caused app_handler (which locks the session) to run.
The result was a deadlock.
* Updated resource_events:stasis_app_message_handler() to determine
if debug was set (which locks the app_registry) before obtaining the
session lock.
* Updated res_stasis:__stasis_app_register to release the app_registry
container lock before calling app_update (which locks the sesison).
ASTERISK-28423
Reported by Ross Beer
Change-Id: I58c69d08cb372852a63933608e4d6c3e456247b4
There exists a scenario where a thread can hold a lock on the
channels container while trying to lock a bridge. At the same
time another thread can hold the lock for said bridge while
attempting to retrieve a channel. This causes a deadlock.
This change fixes this scenario by retrieving a channel snapshot
instead of a channel, as information present in the snapshot
is all that is needed.
ASTERISK-28616
Change-Id: I68ceb1d62c7378addcd286e21be08a660a7cecf2
Found during some testing, there is a race condition between selecting an
appropriate bridge type for a call versus the applying of media on the callee's
session. In some instances a native bridge type would have been chosen, but
due to the callee's media not yet being established at bridge compatibility
check time the simple bridge type is picked instead.
When using chan_pjsip this initiates a topology change event. The topologies
are then compared for the two sessions. However, when the topology was created
for the caller its streams are initialized to "inactive". This topology is then
used as a base when creating the callee's topology, and streams. Soon after
the caller's topology's stream(s) get updated based on the sdp (get set to
sendrecv in the failing scenario).
Now when the topology change event is raised, and the two topologies are
compared, the comparison fails due to a stream state mismatch (sendrecv vs
inactive). And since they differ a reinvite is sent out (to the caller in
this case).
This patch makes it such that when the caller's topology is initially created
it gets created based on its configured endpoint's media topology. When the
endpoint's topology is created its stream's state(s) are initialized to
sendrecv instead of inactive. Subsequently, now when the callee's topology is
created its topology streams are now initialized to sendrecv. Thus when the
topology change event occurs due to the mentioned scenario the stream states
match for the given sessions, and the reinvite is not sent unless due to some
other valid mismatch.
Note, this patch only changes one pending media state's creation point. It's
possible other places *could* be changed, however for now it was deemed best
to only alter what's here.
Change-Id: I6ba3a6a75f64824a1b963044c37acbe951c389c7
If the "max_retries" option is set to 0 then upon failure no
further attemps are made, so explicitly document the behavior.
ASTERISK-28602
Change-Id: I1e30daae9dd6c49ce18744164214d3def505acbf
Calling ne_uri_parse allocates memory that needs to be freed with a
corresponding call to ne_uri_free.
ASTERISK-28572 #close
Change-Id: I8a6834da27000a6807d89cb7a157b2a88fcb5e61
This change ensures that the module isn't unloaded when a
WebSocket is open. Previously it was possible to unload the
module manually or during shutdown which could cause a crash
when any active WebSockets were terminated.
ASTERISK-28585
Change-Id: I85c71ab112f99875b586419a34c08c8b34c14c5c
When we created the External Media addition to ARI we created an
ExternalMedia object to be returned from the channels/externalMedia
REST endpoint. This object contained the channel object that was
created plus local_address and local_port attributes (which are
also in the Channel variables). At the time, we thought that
creating an ExternalMedia object would give us more flexibility
in the future but as we created the sample speech to text
application, we discovered that it doesn't work so well with ARI
client libraries that a) don't have the ExternalMedia object
defined and/or b) can't promote the embedded channel structure
to a first-class Channel object.
This change causes the channels/externalMedia REST endpoint to
return a Channel object (like channels/create and channels/originate)
instead of the ExternalMedia object.
Change-Id: If280094debd35102cf21e0a31a5e0846fec14af9
PostgreSQL 12 finally removed column adsrc from table pg_catalog.pg_attrdef
(column default values), which has been deprecated since version 8.0.
Since then, the official/correct/supported way to retrieve the column
default value from the catalog is function pg_catalog.pg_get_expr().
This change breaks compatibility with pre-8.0 PostgreSQL servers,
but has reached end-of-support more than a decade ago.
cdr_pgsql and res_config_pgsql still have support for pre-7.3
servers, but cleaning that up is perhaps a topic for a major release,
not this bugfix.
ASTERISK-28571
Change-Id: I834cb3addf1937e19e87ede140bdd16cea531ebe
When creating an unsolicited MWI aggregate subscription it was possible for
the subscription object to be double unref'ed. This patch removes the explicit
unref as it is not needed since the RAII_VAR will handle it at function end.
Less concerning there was also a bug that could potentially allow the aggregate
subscription object to be added to the unsolicited container twice. This patch
ensures it is added only once.
ASTERISK-28575
Change-Id: I9ccfdb5ea788bc0c3618db183aae235e53c12763
On shutdown it's possible for the unsolicited mwi container to be freed before
other dependent threads are done using it. This patch ensures this can no
longer happen by wrapping the container in an ao2_global object. The solicited
container was also changed too.
ASTERISK-28552
Change-Id: I8f812286dc19a34916acacd71ce2ec26e1042047
Both res_pjsip and res_pjsip_mwi made use of serializer pools. However, they
both implemented their own serializer pool functionality that was pretty much
identical in each of the source files. This patch removes the duplicated code,
and uses the new 'ast_serializer_pool' object instead.
Additionally res_pjsip_mwi enables a shutdown group on the pool since if the
timing was right the module could be unloaded while taskprocessor threads still
needed to execute, thus causing a crash.
Change-Id: I959b0805ad024585bbb6276593118be34fbf6e1d
Add a new dialplan function PJSIP_MOH_PASSTHROUGH that allows
the on-hold behavior to be controlled on a per-call basis
ASTERISK-28542 #close
Change-Id: Iebe905b2ad6dbaa87ab330267147180b05a3c3a8
There are some warning messages which are not informative without endpoint:
"No registered subscribe handler for event presence.winfo"
"No registered publish handler for event presence"
This patch adds an endpoint name to these messages.
Change-Id: Ia2811ec226d8a12659b4f9d4d224b48289650827
Allow the list of files to be played to be provided explicitly in the
music class's configuration. The primary driver for this change is to
allow URLs to be used for MoH.
Change-Id: I9f43b80b43880980b18b2bee26ec09429d0b92fa
If a permanent contact URI associated with an AOR is invalid, we add a
Contact header to REGISTER responses with a NULL URI, causing a crash.
ASTERISK-28463 #close
Change-Id: Id2b643e58b975bc560aab1c111e6669d54db9102
The following message:
"Subscription request from endpoint <blah> rejected. Expiration of 0 is invalid"
Would sometimes spam the log with warnings if Asterisk restarted and a bunch
of clients sent unsubscribes. This patch changes it from a warning to a debug
message.
Change-Id: I841ec42f65559f3135e037df0e55f89b6447a467
When a stale item was being updated the object was being retrieved, but its
reference was not being decremented after the update. This patch makes it so
the object is now appropriately de-referenced.
ASTERISK-28523
Change-Id: I9d8173d3a0416a242f4eba92fa0853279c500ec7
This change adds support to the JITTERBUFFER dialplan function
for audio and video synchronization. When enabled the RTCP SR
report is used to produce an NTP timestamp for both the audio and
video streams. Using this information the video frames are queued
until their NTP timestamp is equal to or behind the NTP timestamp
of the audio. The audio jitterbuffer acts as the leader deciding
when to shrink/grow the jitterbuffer when adaptive is in use. For
both adaptive and fixed the video buffer follows the size of the
audio jitterbuffer.
ASTERISK-28533
Change-Id: I3fd75160426465e6d46bb2e198c07b9d314a4492
According to RFC3550, ALL RTCP packets must be sent in a compond packet
of at least two individual packets, including SR/RR and SDES. REMB,
FIR, and NACK were not following this format, and as a result, would
fail the packet check in ast_rtcp_interpret. This was found from writing
unit tests for RTCP. The browser would accept the way we were
constructing these RTCP packets, but when sending directly from one
Asterisk instance to another, the above mentioned problem would occur.
Change-Id: Ieb140e9c22568a251a564cd953dd22cd33244605
When modifying an already defined variable in some channel drivers they
add a new variable with the same name to the list, but that value is
never used, only the first one found.
Introduce ast_variable_list_replace() and use it where appropriate.
ASTERISK-23756 #close
Patches:
setvar-multiplie.patch submitted by Michael Goryainov
Change-Id: Ie1897a96c82b8945e752733612ee963686f32839
This fix allows a realtime moh class to be unregistered from the command
line. This is useful when the contents of a directory referenced by a
realtime moh class have changed.
The realtime moh class is then reloaded on the next request and uses the
new directory contents.
ASTERISK-17808
Change-Id: Ibc4c6834592257c4bb90601ee299682d15befbce
Added unit tests for RTCP video stats. These tests include NACK, REMB,
FIR/FUR/PLI, SR/RR/SDES, and packet loss statistics. The REMB and FIR
tests are currently disabled due to a bug. We expect to receive a
compound packet, but the code sends this out as a single packet, which
the browser accepts, but makes Asterisk upset.
While writing these tests, I noticed an issue with NACK as well. Where
it is handling a received NACK request, it was reading in only the first
8 bits of following packets that were also lost. This has been changed
to the correct value of 16 bits.
Also made a minor fix to the data buffer unit test.
Change-Id: I56107c7411003a247589bbb6086d25c54719901b
The Channel resource has a new sub-resource "externalMedia".
This allows an application to create a channel for the sole purpose
of exchanging media with an external server. Once created, this
channel could be placed into a bridge with existing channels to
allow the external server to inject audio into the bridge or
receive audio from the bridge.
See https://wiki.asterisk.org/wiki/display/AST/External+Media+and+ARI
for more information.
Change-Id: I9618899198880b4c650354581b50c0401b58bc46
After receiving a 200 OK with a declined stream in response to a T.38
initiated re-invite Asterisk would crash when attempting to dereference
a NULL session media object.
This patch checks to make sure the session media object is not NULL before
attempting to use it.
ASTERISK-28495
patches:
ast-2019-004.patch submitted by Alexei Gradinari (license 5691)
Change-Id: I168f45f4da29cfe739acf87e597baa2aae7aa572
res_pjsip_mwi allows both solicited and unsolicited MWI subscription types.
While both can be set in the configuration for a given endpoint/aor, only
one is allowed. Precedence is given to unsolicited. Meaning if an endpoint/aor
is configured to allow both types then the solicited subscription is rejected
when it comes in. However, there is a configuration option to override that
behavior:
mwi_subscribe_replaces_unsolicited
When set to "yes" then when a solicited subscription comes in instead of
rejecting it Asterisk is suppose to replace the unsolicited one if it exists.
Prior to this patch there was a bug in Asterisk that allowed the solicted one
to be added, but did not remove the unsolicited. As a matter of fact a new
unsolicited subscription got added everytime a SIP register was received.
Over time this eventually could "flood" a phone with SIP notifies.
This patch fixes that behavior to now make it work as expected. If configured
to do so a solicited subscription now properly replaces the unsolicited one.
As well when an unsubscribe is received the unsolicited subscription is
restored. Logic was also put in to handle reloads, and any configuration changes
that might result from that. For instance, if a solicited subscription had
previously replaced an unsolicited one, but after reload it was configured to
not allow that then the solicited one needs to be shutdown, and the unsolicited
one added.
ASTERISK-28488
Change-Id: Iec2ec12d9431097e97ed5f37119963aee41af7b1
Given the following request path and 2 handler paths...
Request: /channels/externalMedia
Handler: /channels/{channelId} "wildcard"
Handler: /channels/externalmedia "non-wildcard"
...if /channels/externalMedia was registered as a handler after
/channels/{channelId} as shown above, the request would automatically
match the wildcard handler and attempt to parse "externalMedia" into
the channelId variable which isn't what was intended. It'd work
if the non-wildard entry was defined in rest-api/api-docs/channels.json
before the wildcard entry but that makes the json files
order-dependent which isn't a good thing.
To combat this issue, the search loop saves any wildcard match but
continues looking for exact matches at the same level. If it finds
one, it's used. If it hasn't found an exact match at the end of
the current level, the wildcard is used. Regardless, after
searching the current level, the wildcard is cleared so it won't
accidentally match for a different object or a higher level.
BTW, it's currently not possible for more than 1 wildcard entry
to be defined for a level. For instance, there couldn't be:
Handler: /channels/{channelId}
Handler: /channels/{channelName}
We wouldn't know which one to match.
Change-Id: I574aa3cbe4249c92c30f74b9b40e750e9002f925
In chan_sip, there was variable SIPFROMDOMAIN that allows to set
From header URI domain per channel. This patch introduces res_pjsip
variable SIPFROMDOMAIN for backward compatibility with chan_sip.
ASTERISK-28489
Change-Id: I715133e43172ce2a1e82093538dc39f9e99e5f2e
Somehow it's possible for the srtp session object to be NULL even though the
Asterisk srtp object itself is valid. When this happened it would cause a
crash down in the srtp code when attempting to protect or unprotect data.
After looking at the code there is at least one spot that makes this situation
possible. If Asterisk fails to unprotect the data, and after several retries
it still can't then the srtp->session gets freed, and set to NULL while still
leaving the Asterisk srtp object around. However, according to the original
issue reporter this does not appear to be their situation since they found
no errors logged stating the above happened (which Asterisk does for that
situation).
An issue was found however, where a possible race condition could occur between
the pjsip incoming negotiation, and the receiving of RTP packets. Both places
could attempt to create/setup srtp for the same rtp instance at the same time.
This potentially could be the cause of the problem as well.
Given the above this patch adds locking around srtp setup for a given rtp, or
rtcp instance. NULL checks for the session have also been added within the
protect and unprotect functions as a precaution. These checks should at least
stop Asterisk from crashing if it gets in this situation again.
This patch also fixes one other issue noticed during investigation. When doing
a replace the old object was freed before creating the replacement. If the new
replacement object failed to create then the rtp/rtcp instance would now point
to freed srtp data which could potentially cause a crash as well when the next
attempt to reference it was made. This is now fixed so the old srtp object is
kept upon replacement failure.
Lastly, more logging has been added to help diagnose future issues.
ASTERISK-28472
Change-Id: I240e11cbb1e9ea8083d59d50db069891228fe5cc
The code for gathering contacts could result in the same contact
being retrieved and added to the list multiple times. The container
which stores the contacts to display will now only allow a contact
to be added to it once instead of multiple times.
ASTERISK-28228
Change-Id: I805185cfcec03340f57d2b9e6cc43c49401812df
We now check that a body exists and it has a length > 0 before
attempting to process it.
ASTERISK-28447
Reported-by: Gil Richard
Change-Id: Ic469544b22ab848734636588d4c93426cc6f4b1f
The MWI core recently got some new API calls that make tracking MWI state
lifetime more reliable. This patch updates those modules that subscribe to
specific MWI topics to use the new API. Specifically, these modules now
subscribe to both MWI topics and MWI state.
ASTERISK-28442
Change-Id: I32bef880b647246823dbccdf44a98d384fcabfbd
Currently, DELETE /ari/channels/<channelID> supports only few hangup reasons.
It's good enough for simple use, but when it needs to set the detail reason,
it comes challenges.
Added reason_code query parameter for that.
ASTERISK-28385
Change-Id: I1cf1d991ffd759d0591b347445a55f416ddc3ff2
According T.38 Gateway 'Use case 3'
https://wiki.asterisk.org/wiki/display/AST/T.38+Gateway
T.38 Gateway should send T.38 negotiation request to called endpoint
if FAX preamble (using V.21 detector) generated by called endpoint.
But it does not, because fax_gateway_detect_v21 constructs T.38
negotiation request, but forwards it only to other channel,
not to the channel on which FAX preamble is detected.
Some SIP endpoints could be improperly configured to rely on the other side
to initiate T.38 re-INVITEs.
With this patch the T.38 Gateway tries to negotiate with both sides
by sending T.38 negotiation request to both endpoints supported T.38.
Change-Id: I73bb24799bfe1a48adae9c034a2edbae54cc2a39
This change adds support for larger TLS certificates by allowing
OpenSSL to fragment the DTLS packets according to the configured
MTU. By default this is set to 1200.
This is accomplished by implementing our own BIO method that
supports MTU querying. The configured MTU is returned to OpenSSL
which fragments the packet accordingly. When a packet is to be
sent it is done directly out the RTP instance.
ASTERISK-28018
Change-Id: If2d5032019a28ffd48f43e9e93ed71dbdbf39c06
The change #10017 "Handle fax gateway being started more than once"
introdiced a bug which leads to segfault in res_fax_spandsp.
The res_fax_spandsp module does not support reserving sessions, so
fax_session_reserve returns a fax session with state AST_FAX_STATE_INACTIVE.
The fax_gateway_start does not create a real fax session if the fax session
is already present and the state is not AST_FAX_STATE_RESERVED.
But the "reserved" session created for res_fax_spandsp has state
AST_FAX_STATE_INACTIVE, so fax_gateway_start not starting.
Then when fax_gateway_framehook is called and gateway T.38 state is
NEGOTIATED the call of gateway->s->tech->write(gateway->s, f) leads to
segfault, because session tech_pvt is not set, i.e. the tech session
was not initialized/started.
This patch adds check also on AST_FAX_STATE_INACTIVE to the "reserved"
session created for res_fax_spandsp will start.
This patch also adds extra check and log ERROR if tech_pvt is not set
before call tech->write.
ASTERISK-27981 #close
Change-Id: Ife3e65e5f18c902db2ff0538fccf7d28f88fa803
This patch adds a channel name to output of CLI 'fax show session'
and also expands the channel name field up to 30 characters on
CLI 'fax show sessions'
Change-Id: Id059c43ff41811f5e76712b83fb63b8f246da953
When monitoring Asterisk instances, it's often useful to know when an
outbound registration fails, as this often maps to the notion of a trunk
and having a trunk fail is usually a "bad thing". As such, this patch
adds monitoring metrics that track the state of PJSIP outbound registrations.
It does this by looking for the Registry events coming across the Stasis
system topic, and publishing those as metrics to Prometheus. Note that
while this may support other outbound registration types (IAX2, SIP, etc.)
those haven't been tested. Your mileage may vary.
(And why are you still using IAX2 and SIP? It's 2019 folks. Get with the
program.)
This patch also adds Sorcery observers to handle modifications to the
underlying PJSIP outbound registration objects. This is useful when a
reload is triggered that modifies the properties of an outbound registration,
or when ARI push configuration is used and an object is updated or
deleted. Because we rely on properties of the registration object to
define the metric (label key/value pairs), we delete the relevant metric when
we notice that something has changed and wait for a new Stasis message to
arrive to re-create the metric.
ASTERISK-28403
Change-Id: If01420e38530fc20b6dd4aa15cd281d94cd2b87e
This patch adds a few CLI commands to the res_prometheus module to aid
system administrators setting up and configuring the module. This includes:
* prometheus show status: Display basic statistics about the Prometheus
module, including its essential configuration, when it was last scraped,
and how long the scrape took. The last two bits of information are useful
when Prometheus isn't generating metrics appropriately, as it will at
least tell you if Asterisk has had its HTTP route hit by the remote
server.
* prometheus show metrics: Dump the current metrics to the CLI. Useful for
system administrators to see what metrics are currently available without
having to cURL or go to Prometheus itself.
ASTERISK-28403
Change-Id: Ic09813e5e14b901571c5c96ebeae2a02566c5172
This patch adds basic Asterisk bridge statistics to the res_prometheus
module. This includes:
* asterisk_bridges_count: The current number of bridges active on the
system.
* asterisk_bridges_channels_count: The number of channels active in a
bridge.
In all cases, enough information is provided with each bridge metric
to determine a unique instance of Asterisk that provided the data, along
with the technology, subclass, and creator of the bridge.
ASTERISK-28403
Change-Id: Ie27417dd72c5bc7624eb2a7a6a8829d7551788dc
This patch adds basic Asterisk endpoint statistics to the res_prometheus
module. This includes:
* asterisk_endpoints_state: The current state (unknown, online, offline)
for each defined endpoint.
* asterisk_endpoints_channels_count: The current number of channels
associated with a given endpoint.
* asterisk_endpoints_count: The current number of defined endpoints.
In all cases, enough information is provided with each endpoint metric
to determine a unique instance of Asterisk that provided the data, as well
as the underlying technology and resource definition.
ASTERISK-28403
Change-Id: I46443963330c206a7d12722d08dcaabef672310e
Using timestamp with signed int will cause timestamps exceeding max value
to be negative.
This causes the jitterbuffer to do passthrough of the packet.
ASTERISK-28421
Change-Id: I9dabd0718180f2978856c50f43aac4e52dc3cde9
This patch adds basic Asterisk channel statistics to the res_prometheus
module. This includes:
* asterisk_calls_sum: A running sum of the total number of
processed calls
* asterisk_calls_count: The current number of calls
* asterisk_channels_count: The current number of channels
* asterisk_channels_state: The state of any particular channel
* asterisk_channels_duration_seconds: How long a channel has existed,
in seconds
In all cases, enough information is provided with each channel metric
to determine a unique instance of Asterisk that provided the data, as
well as the name, type, unique ID, and - if present - linked ID of each
channel.
ASTERISK-28403
Change-Id: I0db306ec94205d4f58d1e7fbabfe04b185869f59
Prometheus is the defacto monitoring tool for containerized applications.
This patch adds native support to Asterisk for serving up Prometheus
compatible metrics, such that a Prometheus server can scrape an Asterisk
instance in the same fashion as it does other HTTP services.
The core module in this patch provides an API that future work can build
on top of. The API manages metrics in one of two ways:
(1) Registered metrics. In this particular case, the API assumes that
the metric (either allocated on the stack or on the heap) will have
its value updated by the module registering it at will, and not
just when Prometheus scrapes Asterisk. When a scrape does occur,
the metrics are locked so that the current value can be retrieved.
(2) Scrape callbacks. In this case, the API allows consumers to be
called via a callback function when a Prometheus initiated scrape
occurs. The consumers of the API are responsible for populating
the response to Prometheus themselves, typically using stack
allocated metrics that are then formatted properly into strings
via this module's convenience functions.
These two mechanisms balance the different ways in which information is
generated within Asterisk: some information is generated in a fashion
that makes it appropriate to update the relevant metrics immediately;
some information is better to defer until a Prometheus server asks for
it.
Note that some care has been taken in how metrics are defined to
minimize the impact on performance. Prometheus's metric definition
and its support for nesting metrics based on labels - which are
effectively key/value pairs - can make storage and managing of metrics
somewhat tricky. While a naive approach, where we allow for any number
of labels and perform a lot of heap allocations to manage the information,
would absolutely have worked, this patch instead opts to try to place
as much information in length limited arrays, stack allocations, and
vectors to minimize the performance impacts of scrapes. The author of
this patch has worked on enough systems that were driven to their knees
by poor monitoring implementations to be a bit cautious.
Additionally, this patch only adds support for gauges and counters.
Additional work to add summaries, histograms, and other Prometheus
metric types may add value in the future. This would be of particular
interest if someone wanted to track SIP response types.
Finally, this patch includes unit tests for the core APIs.
ASTERISK-28403
Change-Id: I891433a272c92fd11c705a2c36d65479a415ec42
You can now add the "include_local_address" flag to an entry in
rtp.conf "[ice_host_candidates]" to include both the advertized
address and the local address in ICE negotiation:
[ice_host_candidates]
192.168.1.1 = 1.2.3.4,include_local_address
This causes both 192.168.1.1 and 1.2.3.4 to be advertized.
Change-Id: Ide492cd45ce84546175ca7d557de80d9770513db
This change fixes two bugs which both resulted in the packet loss
count exceeding 65,000.
The first issue is that the sequence number check to determine if
cycling had occurred was using the wrong variable resulting in the
check never seeing that cycling has occurred, throwing off the
packet loss calculation. It now uses the correct variable.
The second issue is that the packet loss calculation assumed that
the received number of packets in an interval could never exceed
the expected number. In practice this isn't true due to delayed
or retransmitted packets. The expected will now be updated to
the received number if the received exceeds it.
ASTERISK-28379
Change-Id: If888ebc194ab69ac3194113a808c414b014ce0f6
When multiple endpoints try to register close together using the same
AOR with qualify_frequency set, one contact would qualify immediately
while the other contacts would have to wait out the duration of the
timer before being able to qualify. Changing the conditional to check
the contact container count for a non-zero value allows all contacts to
qualify immediately.
Change-Id: I79478118ee7e0d6e76af7c354d66684220db9415
When we use early bridge with create and dial from stasis using Local channel
and the dialplan does not any entry the it is returned from core_local.c with
No such extension .
In such case asterisk locks up till the channel is not hangup with the error
Exceptionally long voice queue length
* Found that in such case app_control_dial fails on ast_call method and
return -1
* Since it is called from stasis_app_send_command_async and return -1 does
not cause resources to be freed and since no PBX exist it is not able to
read from channel causing exceptionally long queue
* After putting this code found that the channel was releasing immediately
and resources were freed.
ASTERISK-28399
Reported by: Abhay Gupta
Tested by: Abhay Gupta
Change-Id: I0a55c923fc6995559f808d63b9488762b4489318
Updated ast_sip_create_rdata_with_contact and registrar_find_contact
to check the return from pjsip_parse_uri before attempting to
use the uri returned.
ASTERISK-28402
Reported-by: Ross Beer
Change-Id: I9810b3b163c45ed5a56ec743586e5ce107f13ba7
The dial bridge is meant to hold channels which have been created
and dialed in stasis. It handles the frames coming from them and raises
the appropriate events.
It was possible for the code to mistakenly place calls which came
from the dialplan into the dial bridge if they were not in an
answered state. These channels are not outgoing channels and
should not be placed into the dial bridge.
The code now checks to ensure that only stasis created channels are
placed into the dial bridge by checking that a PBX does not exist
on the channel.
ASTERISK-27756
Change-Id: Ideee69ff06c9a0b31f7ed61165f5c055f51d21b6
The transport-cc draft is a mechanism by which additional information
about packet reception can be provided to the sender of packets so
they can do sender side bandwidth estimation. This is accomplished
by having a transport specific sequence number and an RTCP feedback
message. This change implements this in the receiver direction.
For each received RTP packet where transport-cc is negotiated we store
the time at which the RTP packet was received and its sequence number.
At a 1 second interval we go through all packets in that period of time
and use the stored time of each in comparison to its preceding packet to
calculate its delta. This delta information is placed in the RTCP
feedback message, along with indicators for any packets which were not
received.
The browser then uses this information to better estimate available
bandwidth and adjust accordingly. This may result in it lowering the
available send bandwidth or adjusting how "bursty" it can be.
ASTERISK-28400
Change-Id: I654a2cff5bd5554ab94457a14f70adb71f574afc
There is enough MWI functionality to warrant it having its own 'c' and header
files. This patch moves all current core MWI data structures, and functions
into the following files:
main/mwi.h
main/mwi.c
Note, code was simply moved, and not modified. However, this patch is also in
preparation for core MWI changes, and additions to come.
Change-Id: I9dde8bfae1e7ec254fa63166e090f77e4d3097e0
Added a new PJSIP global setting called norefersub.
Default is true to keep support working as before.
res_pjsip_refer: Configures PJSIP norefersub capability accordingly.
Checks the PJSIP global setting value.
If it is true (default) it adds the norefersub capability to PJSIP.
If it is false (disabled) it does not add the norefersub capability
to PJSIP.
This is useful for Cisco switches that do not follow RFC4488.
ASTERISK-28375 #close
Reported-by: Dan Cropp
Change-Id: I0b1c28ebc905d881f4a16e752715487a688b30e9
An earlier contributor apparently forgot to run 'make ari-stubs'
before committing after making ARI model changes.
Change-Id: I7813e5638e2821d11f4b968dc2aeab4f725190a6
Reset the internal counter that the AEL2 compiler uses for unique label
names before compiling. This keeps dialplan labels consistent across
reloads assuming the AEL2 has not changed.
ASTERISK-17799 #close
Reported by: Kirill Katsnelson
Change-Id: I30b3cc887d1ee0644d3f341e2fef16f525d7fae5
In AEL2, if a 'for' statement contains macro* calls, like:
for (&iterator(${TRY},A); "${A}" != ""; &iterate(A)) {
The AEL2 parser will translate these into calls to the deprecated Macro
dialplan application and use the antiquated pipe delimiter.
Instead, convert these into calls to the Gosub dialplan application and
use commas as argument separators.
ASTERISK-18593 #close
Reported by: Luke-Jr
* 'macro' in this context means AEL2 macros, not the 'Macro' application
Change-Id: I3d73716033b8e3e42e0209d355bf5f10c97045fc
When generating the regular expression that matches against existing
extensions, we need to escape literal characters that can also be
regular expression metacharacters. This was already being done for '*'
but we need to do the same for '+'.
In passing, remove some unreachable code - strcmp() is already run
immediately when entering extension_matches().
ASTERISK-14939 #close
Reported by: klaus3000
Change-Id: I8d2cccb3479168fba1b0a6704c52198b396468f1
REMB's exponent is 6-bits (0..63) and has a mantissa of 18-bits. We were using
an unsigned integer to represent the bitrate. However, that type is not large
enough to hold all potential bitrate values. If the bitrate is large enough
bits were being shifted off the "front" of the mantissa, which caused the
wrong value to be sent to the browser.
This patch makes it so it now uses a float type to hold the bitrate. Using a
float allows for all bitrate values to be correctly represented.
ASTERISK-28255
Change-Id: Ice00fdd16693b16b41230664be5d9f0e465b239e
It looks like we're not properly calculating jitter values on received
video streams. This patch enables the code that does jitter calculations
for those streams.
Change-Id: Iaac985808829c8f034db8c57318789c4c8c11392
It was difficult to check the channel's current application and
parameters using ARI for current channels. Added app_name, app_data
items to show the current application information.
ASTERISK-28343
Change-Id: Ia48972b3850e5099deab0faeaaf51223a1f2f38c
If Realtime @ variable value is NULL or empty or contains only whitespaces
then when we try to retrieve it using PJSIP_ENDPOINT we get WARNING
pjsip_endpoint_function_read: Unknown property @my_var for PJSIP endpoint.
And the variable is missing in the result of CLI pjsip show endpoint.
This patch keeps empty sorcery extended field.
ASTERISK-28341 #close
Change-Id: I221fccc04cbfa2be17ce971f64ae0e74e465eea0
Because StasisEnd's timestamp created it's own timestamp, it makes
wrong timestamp, compare to other channel event(ChannelDestroyed).
Fixed to getting a timestamp from the Channel's timestamp.
ASTERISK-28333
Change-Id: I5eb8380fc472f1100535a6bc4983c64767026116
As part of an earlier voicemail refactor, ast_delete_mwi_state_full
was modified to remove the pool topic for a mailbox when the state
was deleted. This was an attempt to prevent stale topics from
accumulating when app_voicemail was reloaded and a mailbox went
away. Unfortunately because of the fact that when app_voicemail
reloads, ALL mailboxes are deleted then only current ones recreated,
topics were being removed from the pool that still had subscribers
on them, then recreated as new topics of the same name. So now
modules like res_pjsip_mwi are listening on a topic that will
never receive any messages because app_voicemail is publishing on
a different topic that happens to have the same name. The solutiuon
to this is not easy and given that accumulating topics for
deleted mailboxes is less evil that not sending NOTIFYs...
* Removed the call to stasis_topic_pool_delete_topic in
ast_delete_mwi_state_full.
Also:
* Fixed a topic reference leak in res_pjsip_mwi
mwi_stasis_subscription_alloc.
* Added some debugging to mwi_stasis_subscription_alloc,
stasis_topic_create, and topic_dtor.
* Fixed a topic reference leak in an error path in
internal_stasis_subscribe.
ASTERISK-28306
Reported-by: Jared Hull
Change-Id: Id7da0990b3ac4be4b58491536b35f41291247b27
Added ARI resource for channel statistics.
GET /ari/channels/{channelId}/rtp_statistics : It returns given
channel's rtp statistics detail.
ASTERISK-28320
Change-Id: I4343eec070438cec13f2a4f22e7fd9e574381376
George Joseph
Joshua C. Colp
Ben Ford
Alexander Traud
Salah Ahmed
Nick French
Alexei Gradinari
Kevin Harwell
Jaco Kroon
Boris P. Korzun
Ivan Poddubnyi
Sean Bright
roadkill
Robert Cripps
Jean Aunis
Torrey Searle
Richard Mudgett
Sungtae Kim
Pirmin Walthert
Nathan Bruning
Stanislav
Alexander Greiner-Baer
Kevin Harwell
Holger Hans Peter Freyther
lvl
Michal Hajek
Patrick Verzele
Nickolay Shmyrev
sungtae kim
Università di Bologna - CESIA VoIP
Moises Silva
Walter Doekes
Nicholas John Koch
Roger James
Guido Falsi
DanielYK
bernard merindol
Torrey Searle
Michael Neuhauser
Rodrigo Ramírez Norambuena
Friendly Automation
Seán C McCord
Joshua Colp
Salah Ahmed
Christoph Moench-Tegeder
Stas Kobzar
Matt Jordan
Morten Tryfoss
agupta
Dan Cropp
Matthew Fredrickson