https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r44378 | kpfleming | 2006-10-04 14:47:22 -0500 (Wed, 04 Oct 2006) | 4 lines
update thread creation code a bit
reduce standard thread stack size slightly to allow the pthreads library to allocate the stack+data and not overflow a power-of-2 allocation in the kernel and waste memory/address space
add a new stack size for 'background' threads (those that don't handle PBX calls) when LOW_MEMORY is defined
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@44379 65c4cc65-6c06-0410-ace0-fbb531ad65f3
now reports AST_MODULE_LOAD_DECLINE when loading if config file
is not there, also fixed an error in res_config_pgsql where it
had a non static function when it should.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@41633 65c4cc65-6c06-0410-ace0-fbb531ad65f3
- restructured build tree and makefiles to eliminate recursion problems
- support for embedded modules
- support for static builds
- simpler cross-compilation support
- simpler module/loader interface (no exported symbols)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@40722 65c4cc65-6c06-0410-ace0-fbb531ad65f3
channel to remove the theoretical race condition that the channel could get
bridged before the channel's jitterbuffer gets configured. This was pointed
out by PCadach on IRC. Thanks!
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@39964 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.2
........
r38903 | russell | 2006-08-05 01:07:39 -0400 (Sat, 05 Aug 2006) | 2 lines
suppress a compiler warning about the usage of a potentially uninitialized variable
........
r38904 | russell | 2006-08-05 01:08:50 -0400 (Sat, 05 Aug 2006) | 10 lines
Fix an issue that would cause a NewCallerID manager event to be generated
before the channel's NewChannel event. This was due to a somewhat recent
change that included using ast_set_callerid() where it wasn't before. This
function should not be used in the channel driver "new" functions.
(issue #7654, fixed by me)
Also, fix a couple minor bugs in usecount handling. chan_iax2 could have
increased the usecount but then returned an error. The place where chan_sip
increased the usecount did not call ast_update_usecount()
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@38905 65c4cc65-6c06-0410-ace0-fbb531ad65f3
inet_ntoa, which uses thread specific data (aka thread local storage) instead
of stack allocatted buffers to store the result.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@38042 65c4cc65-6c06-0410-ace0-fbb531ad65f3
........
r36725 | russell | 2006-07-03 00:19:09 -0400 (Mon, 03 Jul 2006) | 4 lines
use ast_set_callerid to be more consistent and to make sure that the
"callerid" option in the conf files is always handled the same way and sets ANI
(issue #7285, gkloepfer)
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@36726 65c4cc65-6c06-0410-ace0-fbb531ad65f3
allocated. These changes caused crashes when using a channel type that did
not support the jitterbuffer. Instead of fixing why it's crashing, I'm going
to implement this in a better way next week. The way I did it caused a
jitterbuffer to be allocated on every channel where the channel type supported
jitterbuffers, even if they were disabled.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@35746 65c4cc65-6c06-0410-ace0-fbb531ad65f3
so that channels not using a jitterbuffer don't waste as much memory
- ensure that the channel drivers that use jitterbuffers can handle a failure
from configuring a jitterbuffer on a new channel because of a memory
allocation error
- On passing through these channel drivers, configure the jitterbuffer before
starting the PBX thread instead of afterwards. If the pbx fails to start for
whatever reason, this would have caused a crash.
- Also on passing, move the increase of the usecount to after all of the
possible failure conditions in the function
- fix a place where ast_update_use_count() was not called
- ensure that the owner channel pointer of the channel pvt strcutures is set to
NULL in failure conditions
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@35553 65c4cc65-6c06-0410-ace0-fbb531ad65f3
and mgcp channels
- remove the jitterbuffer configuration from the pvt structures in
the sip, zap, and skinny channel drivers, as copying the same global
configuration into each pvt structure has no benefit.
- update and fix some typos in jitterbuffer related documentation
(issue #7257, north, with additional updates and modifications)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@31413 65c4cc65-6c06-0410-ace0-fbb531ad65f3
update iax2_indicate to pass control frame payload to the connected channel
add an API call for sending an indication with payload, and use it for control frames with payload
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@26417 65c4cc65-6c06-0410-ace0-fbb531ad65f3
As partly documented in loader.c and include/asterisk/module.h,
modules are now expected to return all of their methods and flags
into a structure 'mod_data', and are normally loaded with RTLD_NOW
| RTLD_LOCAL, so symbols are resolved immediately and conflicts
should be less likely. Only in a small number of cases (res_*,
typically) modules are loaded RTLD_GLOBAL, so they can export
symbols.
The core of the change is only the two files loader.c and
include/asterisk/module.h, all the rest is simply adaptation of the
existing modules to the new API, a rather mechanical (but believe
me, time and finger-consuming!) process whose detail you can figure
out by svn diff'ing any single module.
Expect some minor compilation issue after this change, please
report it on mantis http://bugs.digium.com/view.php?id=6968
so we collect all the feedback in one place.
I am just sorry that this change missed SVN version number 20000!
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@20003 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.2
........
r9404 | kpfleming | 2006-02-10 14:38:59 -0600 (Fri, 10 Feb 2006) | 2 lines
don't create monitor threads in detached mode, when we need to be able to pthread_join() them later if the module is unloaded (solve crash-on-unload problem for these channel modules)
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@9405 65c4cc65-6c06-0410-ace0-fbb531ad65f3
const-ify some more APIs
remove 'type' field from ast_channel, in favor of the one in the channel's tech structure
allow string field module users to specify the 'chunk size' for pool allocations
update chan_alsa to be compatible with recent const-ification patches
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@9060 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This should prevent us from unintentionally changing variable
values when they're returned from pbx_builtin_getvar_helper.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@7304 65c4cc65-6c06-0410-ace0-fbb531ad65f3