This change adds a PJSIP patch (which has been contributed upstream)
to allow the registration of IPv6 transport types.
Using this the res_pjsip_transport_websocket module now registers
an IPv6 Websocket transport and uses it for the corresponding
traffic.
ASTERISK-26685
Change-Id: Id1f9126f995b31dc38db8fdb58afd289b4ad1647
This change updates the documentation for the outbound_proxy option
to ensure it is consistently stated that a full SIP URI must be
provided for the option.
The res_pjsip_outbound_registration module has also been changed so
that the provided outbound_proxy value is checked to ensure it is a
URI and if not an error is output stating so.
ASTERISK-26782
Change-Id: I6c239a32274846fd44e65b44ad9bf6373479b593
* Removed all 2.5.5 functional patches.
* Updated usages of pj_release_pool to be "safe".
* Updated configure options to disable webrtc.
* Updated config_site.h to disable webrtc in pjmedia.
* Added Richard Mudgett's recent resolver patches.
Change-Id: Ib400cc4dfca68b3d07ce14d314e829bfddc252c7
Using the same auth section for inbound and outbound authentication is not
recommended. There is a difference in meaning for an empty realm setting
between inbound and outbound authentication uses.
An empty inbound auth realm represents the global section's default_realm
value when the authentication object is used to challenge an incoming
request. An empty outgoing auth realm is treated as a don't care wildcard
when the authentication object is used to respond to an incoming
authentication challenge.
ASTERISK-26799
Change-Id: Id3952f7cfa1b6683b9954f2c5d2352d2f11059ce
The original return value corresponded to AST_SIP_AUTHENTICATION_CHALLENGE
but we have no authenticator registered to create the challenge.
Change-Id: I62368180d774b497411b80fbaabd0c80841f8512
This reverts commit 6492e91392.
The change in question was intended to prevent the need to reload in
order to update qualifies on contacts when an AOR changes. However, this
ended up causing a deadlock instead.
Change-Id: I1a835c90a5bb65b6dc3a1e94cddc12a4afc3d71e
Prior to this change, qualifies would only update in the following
cases:
* A reload of res_pjsip.so was issued.
* A dynamic contact was re-registered after its AOR's qualify_frequency
had been changed
This does not work well if you are using realtime for your AORs. You can
update your database to have a new qualify_frequency, but the permanent
contacts on that AOR will not have their qualifies updated. And the
dynamic contacts on that AOR will not have their qualifies updated until
the next registration, which could be a long time.
This change seeks to fix this problem by making it so that whenever AOR
configuration is applied, the contacts pertaining to that AOR have their
qualifies updated.
Additions from this patch:
* AOR sorcery objects now have an apply handler that calls into a newly
added function in the OPTIONS code. This causes all contacts
associated with that AOR to re-schedule qualifies.
* When it is time to qualify a contact, the OPTIONS code checks to see
if the AOR can still be retrieved. If not, then qualification is
canceled on the contact.
Alterations from this patch:
* The registrar code no longer updates contact's qualify_frequence and
qualify_timeout. There is no point to this since those values already
get updated when the AOR changes.
* Reloading res_pjsip.so no longer calls the OPTIONS initialization
function. Reloading res_pjsip.so results in re-loading AORs, which
results in re-scheduling qualifies.
Change-Id: I2e7c3316da28f389c45954f24c4e9389abac1121
There are some error cases in PJSIP when sending a request that will
result in the callback for the request being invoked. The code did not
handle this case and assumed on every error case that the callback was not
invoked.
The code has been changed to check whether the callback has been invoked
and if so to absorb the error and treat it as a success.
ASTERISK-26679
ASTERISK-26699
Change-Id: I563982ba204da5aa1428989a11c06dd9087fea91
The PJSIPShowRegistrationsInbound AMI command was just dumping out
all AORs which was pretty useless and resource heavy since it had
to get all endpoints, then all aors for each endpoint, then all
contacts for each aor.
PJSIPShowRegistrationInboundContactStatuses sends ContactStatusDetail
events which meets the intended purpose of the other command and has
significantly less overhead. Also, some additional fields that were
added to Contact since the original creation of the ContactStatusDetail
event have been added to the end of the event.
For compatibility purposes, PJSIPShowRegistrationsInbound is left
intact.
ASTERISK-26644 #close
Change-Id: I326f12c9ecb52bf37ba03f0748749de4da01490a
* Don't hold the req_wrapper lock too long in endpt_send_request(). We
could block the PJSIP monitor thread if the timeout timer expires.
sip_get_tpselector_from_endpoint() does a sorcery access that could take
awhile accessing a database. pjsip_endpt_send_request() might take awhile
if selecting a transport.
* Shorten the time that the req_wrapper lock is held in the callback
functions.
* Simplify endpt_send_request() req_wrapper->timeout code.
* Removed some redundant req_wrapper->timeout_timer->id assignments.
Change-Id: I3195e3a8e0207bb8e7f49060ad2742cf21a6e4c9
When channel format changes occurred as a result of an RTP
re-negotiation the bridge was not informed this had happened.
As a result the bridge technology was not re-evaluated and the
channel may have been in a bridge technology that was incompatible
with its formats. The bridge is now unbridged and the technology
re-evaluated when this occurs.
The chan_pjsip module also allowed asymmetric codecs for sending
and receiving. This did not work with all devices and caused one
way audio problems. The default has been changed to NOT do this
but to match the sending codec to the receiving codec. For users
who want asymmetric codecs an option has been added, asymmetric_rtp_codec,
which will return chan_pjsip to the previous behavior.
The codecs returned by the chan_pjsip module when queried by
the bridge_native_rtp module were also not reflective of the
actual negotiated codecs. The nativeformats are now returned as
they reflect the actual negotiated codecs.
ASTERISK-26423 #close
Change-Id: I6ec88c6e3912f52c334f1a26983ccb8f267020dc
This change adds support for dual stack automatically. No
configuration is required and the IP address and version
in the SIP messages and SDP will be automatically changed
based on the transport over which the message is being
sent. RTP usage has also been changed to listen on both
IPv4 and IPv6 simultaneously to allow media to flow, and
to allow ICE support on both simultaneously. This also
allows failover between IPv6 and IPv4 to work as expected.
ASTERISK-26309 #close
Change-Id: I235a421d8f9a326606d861b449fa6fe3a030572d
When performing DNS resolution the failover code present in
res_pjsip currently assumes that a request will always have
at least one viable address. In practice this is not true.
A domain may be used that has no records.
The code now checks that at least one address exists on the
request which prevents looping.
ASTERISK-26364 #close
Change-Id: Ic0761b0264864acd85915c94d878a81624940f4c
This implements the chan_sip legacy_useroption_parsing option but with a
better name.
* Made the caller-id number and redirecting number strings obtained from
incoming SIP URI user fields always truncated at the first semicolon.
People don't care about anything after the semicolon showing up on their
displays even though the RFC allows the semicolon.
ASTERISK-26316 #close
Reported by: Kevin Harwell
Change-Id: Ib42b0e940dd34d84c7b14bc2e90d1ba392624f62
This patch add config to pjsip by endpoint.
;preferred_codec_only=yes
; Respond to a SIP invite with the single most preferred codec
; rather than advertising all joint codec capabilities. This
; limits the other side's codec choice to exactly what we prefer.
ASTERISK-26317 #close
Reported by: AaronAn
Tested by: AaronAn
Change-Id: Iad04dc55055403bbf5ec050997aee2dadc4f0762
contact_user, when specified on an endpoint, will override the user
portion of the Contact header on outgoing requests.
Change-Id: Icd4ebfda2f2e44d3ac749d0b4066630e988407d4
The PJSIP taskprocessors could be overflowed on startup
if there are many (thousands) realtime endpoints
configured with unsolicited mwi.
The PJSIP stack could be totally unresponsive for a few minutes
after boot completed.
This patch creates a separate PJSIP serializers pool for mwi
and makes unsolicited mwi use serializers from this pool.
This patch also adds 2 new global options to tune taskprocessor
alert levels: 'mwi_tps_queue_high' and 'mwi_tps_queue_low'.
This patch also adds new global option 'mwi_disable_initial_unsolicited'
to disable sending unsolicited mwi to all endpoints on startup.
If disabled then unsolicited mwi will start processing
on next endpoint's contact update.
ASTERISK-26230 #close
Change-Id: I4c8ecb82c249eb887930980a800c9f87f28f861a
The new endpoint option allows the PJSIP channel driver's fax_detect
endpoint option to timeout on a call after the specified number of
seconds into a call. The new feature is disabled if the timeout is set
to zero. The option is disabled by default.
ASTERISK-26214
Reported by: Richard Mudgett
Change-Id: Id5a87375fb2c4f9dc1d4b44c78ec8735ba65453d
If AST_TEST_DEFINE is not conditional to TEST_FRAMEWORK it produces dead
code. This places all existing unit tests into a conditional block if
they weren't already.
ASTERISK-26211 #close
Change-Id: I8ef83ee11cbc991b07b7a37ecb41433e8c734686
If specified, incoming SUBSCRIBE requests will be searched for the matching
extension in the indicated context. If no "subscribe_context" is specified,
then the "context" setting is used.
ASTERISK-25471 #close
Change-Id: I3fb7a15f5bc154079bd348c08b7ad1cdd2d5e514
Registering the PJMEDIA error codes allows errors found when parsing an
incoming SDP to be easier to figure out.
"Missing SDP rtpmap for dynamic payload type (PJMEDIA_SDP_EMISSINGRTPMAP)"
is much easier to understand than "Unknown error 220030".
ASTERISK-25772
Change-Id: I44b2dcea656fedd7593171be9e845880a2c70ca0
The patch removes updating all Endpoints' status on startup.
Instead, only non-qualified aors with static contact
and non-qualified non-expired contacts are retrieved from the realtime to
update the endpoint status to ONLINE.
The endpoint name was added to the contact object to simply find the endpoint
that created this contact.
The status of endpoints with qualified aors will be updated by 'qualify'
functions.
ASTERISK-26061 #close
Change-Id: Id324c1776fa55d3741e0c5457ecac0304cb1a0df
As res_pjsip_nat rewrites contact's address, only the last Via header
can contain the source address of registered endpoint.
Also Call-Id header may contain the source address of registered
endpoint.
Added "via_addr", "via_port", "call_id" to contact.
Added new fields ViaAddress, CallID to AMI event ContactStatus.
ASTERISK-26011
Change-Id: I36bcc0bf422b3e0623680152d80486aeafe4c576
The send request callback function currently assumes that it
will only ever be called on transaction state changes. This is
not always true. If our own timer callback occurs we will call
the callback with a timer event instead of a transaction state
change event. In this case the transaction on the event is
invalid and accessing it will result in a crash.
ASTERISK-26049 #close
Change-Id: I623211c8533eb73056b0250b4580b49ad4174dfc
With the old SIP module we can use IP access controls per peer.
PJSIP module missing this feature.
This patch added next configuration Endpoint options:
"acl" - list of IP ACL section names in acl.conf
"deny" - List of IP addresses to deny access from
"permit" - List of IP addresses to permit access from
"contact_acl" - List of Contact ACL section names in acl.conf
"contact_deny" - List of Contact header addresses to deny
"contact_permit" - List of Contact header addresses to permit
This patch also better logging failed request:
add custom message instead of "No matching endpoint found"
add SIP method to logging
ASTERISK-25900
Change-Id: I456dea3909d929d413864fb347d28578415ebf02
This patch modified pjsip_options to retrieve only
permament contacts for aor if the qualify_frequency is > 0
and persisted contacts if the qualify_frequency is > 0.
This patch also fixed a bug in res_sorcery_astdb.
res_sorcery_astdb doesn't save object data retrived from astdb.
ASTERISK-25826
Change-Id: I1831fa46c4578eae5a3e574ee3362fddf08a1f05
If the Asterisk system name is set in asterisk.conf, it will be stored
into the "reg_server" field in the ps_contacts table to facilitate
multi-server setups.
ASTERISK-25931
Change-Id: Ia8f6bd2267809c78753b52bcf21835b9b59f4cb8
A feature of chan_sip that service providers relied upon was the ability to
identify by the Authorization username. This is most often used when customers
have a PBX that needs to register rather than identify by IP address. From my
own experiance, this is pretty common with small businesses who otherwise
don't need a static IP.
In this scenario, a register from the customer's PBX may succeed because From
will usually contain the PBXs account id but an INVITE will contain the caller
id. With nothing recognizable in From, the service provider's Asterisk can
never match to an endpoint and the INVITE just stays unauthorized.
The fixes:
A new value "auth_username" has been added to endpoint/identify_by that
will use the username and digest fields in the Authorization header
instead of username and domain in the the From header to match an endpoint,
or the To header to match an aor. This code as added to
res_pjsip_endpoint_identifier_user rather than creating a new module.
Although identify_by was always a comma-separated list, there was only
1 choice so order wasn't preserved. So to keep the order, a vector was added
to the end of ast_sip_endpoint. This is only used by res_pjsip_registrar
to find the aor. The res_pjsip_endpoint_identifier_* modules are called in
globals/endpoint_identifier_order.
Along the way, the logic in res_pjsip_registrar was corrected to match
most-specific to least-specific as res_pjsip_endpoint_identifier_user does.
The order is:
username@domain
username@domain_alias
username
Auth by username does present 1 problem however, the first INVITE won't have
an Authorization header so the distributor, not finding a match on anything,
sends a securty_alert. It still sends a 401 with a challenge so the next
INVITE will have the Authorization header and presumably succeed. As a result
though, that first security alert is actually a false alarm.
To address this, a new feature has been added to pjsip_distributor that keeps
track of unidentified requests and only sends the security alert if a
configurable number of unidentified requests come from the same IP in a
configurable amout of time. Those configuration options have been added to
the global config object. This feature is only used when auth_username
is enabled.
Finally, default_realm was added to the globals object to replace the hard
coded "asterisk" used when an endpoint is not yet identified.
The testsuite tests all pass but new tests are forthcoming for this new
feature.
ASTERISK-25835 #close
Reported-by: Ross Beer
Change-Id: I30ba62d208e6f63439600916fcd1c08a365ed69d
This patch added new global pjsip option 'disable_multi_domain'.
Disabling Multi Domain can improve Realtime performance by reducing
number of database requests.
ASTERISK-25930 #close
Change-Id: I2e7160f3aae68475d52742107949a799aa2c7dc7
There are several places that do scheduled tasks or periodic housecleaning,
each with its own implementation:
* res_pjsip_keepalive has a thread that sends keepalives.
* pjsip_distributor has a thread that cleans up expired unidentified requests.
* res_pjsip_registrar_expire has a thread that cleans up expired contacts.
* res_pjsip_pubsub uses ast_sched directly and then calls ast_sip_push_task.
* res_pjsip_sdp_rtp also uses ast_sched to send keepalives.
There are also places where we should be doing scheduled work but aren't.
A good example are the places we have sorcery observers to start registration
or qualify. These don't work when changes are made to a backend database
without a pjsip reload. We need to check periodically.
As a first step to solving these issues, a new ast_sip_sched facility has
been created.
ast_sip_sched wraps ast_sched but only uses ast_sched as a scheduled queue.
When a task is ready to run, ast_sip_task_pusk is called for it. This ensures
that the task is executed in a PJLIB registered thread and doesn't hold up the
ast_sched thread so it can immediately continue processing the queue. The
serializer used by ast_sip_sched is one of your choosing or a random one from
the res_pjsip pool if you don't choose one.
Another feature is the ability to automatically clean up the task_data when the
task expires (if ever). If it's an ao2 object, it will be dereferenced, if
it's a malloc'd object it will be freed. This is selectable when the task is
scheduled. Even if you choose to not auto dereference an ao2 task data object,
the scheduler itself maintains a reference to it while the task is under it's
control. This prevents the data from disappearing out from under the task.
There are two scheduling models.
AST_SIP_SCHED_TASK_PERIODIC specifies that the invocations of the task occur at
the specific interval. That is, every "interval" milliseconds, regardless of
how long the task takes. If the task takes longer than the interval, it will
be scheduled at the next available multiple of interval. For exmaple: If the
task has an interval of 60 secs and the task takes 70 secs (it better not),
the next invocation will happen at 120 seconds.
AST_SIP_SCHED_TASK_DELAY specifies that the next invocation of the task should
start "interval" milliseconds after the current invocation has finished.
Also, the same ast_sched facility for fixed or variable intervals exists. The
task's return code in conjunction with the AST_SIP_SCHED_TASK_FIXED or
AST_SIP_SCHED_TASK_VARIABLE flags controls the next invocation start time.
One res_pjsip.h housekeeping change was made. The pjsip header files were
added to the top. There have been a few cases lately where I've needed
res_pjsip.h just for ast_sip calls and had compiles fail spectacularly because
I didn't add the pjsip header files to my source even though I never referenced
any pjsip calls.
Finally, a few new convenience APIs were added to astobj2 to make things a
little easier in the scheduler. ao2_ref_and_lock() calls ao2_ref() and
ao2_lock() in one go. ao2_unlock_and_unref() does the reverse. A few macros
were also copied from res_phoneprov because I got tired of having to duplicate
the same hash, sort and compare functions over and over again. The
AO2_STRING_FIELD_(HASH|SORT|CMP)_FN macros will insert functions suitable for
aor_container_alloc into your source.
This facility can be used immediately for the situations where we already have
a thread that wakes up periodically or do some scheduled work. For the
registration and qualify issues, additional sorcery and schema changes would
need to be made so that we can easily detect changed objects on a periodic
basis without having to pull the entire database back to check. I'm thinking
of a last-updated timestamp on the rows but more on this later.
Change-Id: I7af6ad2b2d896ea68e478aa1ae201d6dd016ba1c
* Added Useragent and RegExpire headers to AMI Event
ContactStatusDetail with associated documentation.
ASTERISK-25903 #close
Change-Id: If3d121e943e588d016ba51d4eb9c6a421a562239
res_pjsip_mwi was missing the chan_sip "vmexten" functionality which adds
the Message-Account header to the MWI NOTIFY. Also, specifying mailboxes
on endpoints for unsolicited mwi and on aors for subscriptions required
that the admin know in advance which the client wanted. If you specified
mailboxes on the endpoint, subscriptions were rejected even if you also
specified mailboxes on the aor.
Voicemail extension:
* Added a global default_voicemail_extension which defaults to "".
* Added voicemail_extension to both endpoint and aor.
* Added ast_sip_subscription_get_dialog for support.
* Added ast_sip_subscription_get_sip_uri for support.
When an unsolicited NOTIFY is constructed, the From header is parsed, the
voicemail extension from the endpoint is substituted for the user, and the
result placed in the Message-Account field in the body.
When a subscribed NOTIFY is constructed, the subscription dialog local uri
is parsed, the voicemail_extension from the aor (looked up from the
subscription resource name) is substituted for the user, and the result
placed in the Message-Account field in the body.
If no voicemail extension was defined, the Message-Account field is not added
to the NOTIFY body.
mwi_subscribe_replaces_unsolicited:
* Added mwi_subscribe_replaces_unsolicited to endpoint.
The previous behavior was to reject a subscribe if a previous internal
subscription for unsolicited MWI was found for the mailbox. That remains the
default. However, if there are mailboxes also set on the aor and the client
subscribes and mwi_subscribe_replaces_unsolicited is set, the existing internal
subscription is removed and replaced with the external subscription. This
allows an admin to configure mailboxes on both the endpoint and aor and allows
the client to select which to use.
ASTERISK-25865 #close
Reported-by: Ross Beer
Change-Id: Ic15a9415091760539c7134a5ba3dc4a6a1217cea
No one seemed to notice but every time an OPTIONS goes out, it goes
out with a From of "asterisk" (or whatever the default from_user is set to),
even if you specify an endpoint.
The issue had several causes...
qualify_contact is only called with an endpoint if called from the CLI.
If the endpoint is NULL, qualify_contact only looks up the endpoint if
authenticate_qualify=yes. Even then, it never passes it on to
ast_sip_create_request where the From header is set. Therefore From
is always "asterisk" (or whatever the default from_user is set to).
Even if ast_sip_create_request were to get an endpoint, it only sets
the From if endpoint->from_user is set.
The fix is 4 parts...
First, create_out_of_dialog_request was modified to use the endpoint id
if endpoint was specified and from_user is not set.
Second, qualify_contact was modified to always look up an endpoint if
one wasn't specified regardless of authenticate_qualify. It then passes
the endpoint on to create_out_of_dialog_request.
Third (and most importantly), find_an_endpoint was modified to find
an endpoint by using an "aors LIKE %contact->aor%" predicate with
ast_sorcery_retrieve_by_fields. As such, this patch will only work
if the sorcery realtime optimizations patch goes in. Otherwise we'd
be pulling the entire endpoints database every time we send an OPTIONS.
Since we already know the contact's aor, the on_endpoint callback was also
modified to just check if the contact->aor is an exact match to one of
the endpoint's.
Finally, since we now have an endpoint for every OPTIONS request,
res_pjsip/endpt_send_request (which handles out-of-dialog reqests) was
updated to get the transport from the endpoint and set it on tdata.
Now the correct transport is used.
Change-Id: I2207e12bb435e373bd1e03ad091d82e5aba011af
There were a number of places in the res_pjsip stack that were getting
all endpoints or all aors, and then filtering them locally.
A good example is pjsip_options which, on startup, retrieves all
endpoints, then the aors for those endpoints, then tests the aors to see
if the qualify_frequency is > 0. One issue was that it never did
anything with the endpoints other than retrieve the aors so we probably
could have skipped a step and just retrieved all aors. But nevermind.
This worked reasonably well with local config files but with a realtime
backend and thousands of objects, this was a nightmare. The issue
really boiled down to the fact that while realtime supports predicates
that are passed to the database engine, the non-realtime sorcery
backends didn't.
They do now.
The realtime engines have a scheme for doing simple comparisons. They
take in an ast_variable (or list) for matching, and the name of each
variable can contain an operator. For instance, a name of
"qualify_frequency >" and a value of "0" would create a SQL predicate
that looks like "where qualify_frequency > '0'". If there's no operator
after the name, the engines add an '=' so a simple name of
"qualify_frequency" and a value of "10" would return exact matches.
The non-realtime backends decide whether to include an object in a
result set by calling ast_sorcery_changeset_create on every object in
the internal container. However, ast_sorcery_changeset_create only does
exact string matches though so a name of "qualify_frequency >" and a
value of "0" returns nothing because the literal "qualify_frequency >"
doesn't match any name in the objset set.
So, the real task was to create a generic string matcher that can take a
left value, operator and a right value and perform the match. To that
end, strings.c has a new ast_strings_match(left, operator, right)
function. Left and right are the strings to operate on and the operator
can be a string containing any of the following: = (or NULL or ""), !=,
>, >=, <, <=, like or regex. If the operator is like or regex, the
right string should be a %-pattern or a regex expression. If both left
and right can be converted to float, then a numeric comparison is
performed, otherwise a string comparison is performed.
To use this new function on ast_variables, 2 new functions were added to
config.c. One that compares 2 ast_variables, and one that compares 2
ast_variable lists. The former is useful when you want to compare 2
ast_variables that happen to be in a list but don't want to traverse the
list. The latter will traverse the right list and return true if all
the variables in it match the left list.
Now, the backends' fields_cmp functions call ast_variable_lists_match
instead of ast_sorcery_changeset_create and they can now process the
same syntax as the realtime engines. The realtime backend just passes
the variable list unaltered to the engine. The only gotcha is that
there's no common realtime engine support for regex so that's been noted
in the api docs for ast_sorcery_retrieve_by_fields.
Only one more change to sorcery was done... A new config flag
"allow_unqualified_fetch" was added to reg_sorcery_realtime.
"no": ignore fetches if no predicate fields were supplied.
"error": same as no but emit an error. (good for testing)
"yes": allow (the default);
"warn": allow but emit a warning. (good for testing)
Now on to res_pjsip...
pjsip_options was modified to retrieve aors with qualify_frequency > 0
rather than all endpoints then all aors. Not only was this a big
improvement in realtime retrieval but even for config files there's an
improvement because we're not going through endpoints anymore.
res_pjsip_mwi was modified to retieve only endpoints with something in
the mailboxes field instead of all endpoints then testing mailboxes.
res_pjsip_registrar_expire was completely refactored. It was retrieving
all contacts then setting up scheduler entries to check for expiration.
Now, it's a single thread (like keepalive) that periodically retrieves
only contacts whose expiration time is < now and deletes them. A new
contact_expiration_check_interval was added to global with a default of
30 seconds.
Ross Beer reports that with this patch, his Asterisk startup time dropped
from around an hour to under 30 seconds.
There are still objects that can't be filtered at the database like
identifies, transports, and registrations. These are not going to be
anywhere near as numerous as endpoints, aors, auths, contacts however.
Back to allow_unqualified_fetch. If this is set to yes and you have a
very large number of objects in the database, the pjsip CLI commands
will attempt to retrive ALL of them if not qualified with a LIKE.
Worse, if you type "pjsip show endpoint <tab>" guess what's going to
happen? :) Having a cache helps but all the objects will have to be
retrieved at least once to fill the cache. Setting
allow_unqualified_fetch=no prevents the mass retrieve and should be used
on endpoints, auths, aors, and contacts. It should NOT be used for
identifies, registrations and transports since these MUST be
retrieved in bulk.
Example sorcery.conf:
[res_pjsip]
endpoint=config,pjsip.conf,criteria=type=endpoint
endpoint=realtime,ps_endpoints,allow_unqualified_fetch=error
ASTERISK-25826 #close
Reported-by: Ross Beer
Tested-by: Ross Beer
Change-Id: Id2691e447db90892890036e663aaf907b2dc1c67
Per RFC3325, the 'From' header is now anonymized on outgoing calls when
caller id presentation is prohibited.
TID = trust_id_outbound
PRO = Set(CALLERID(pres)=prohib)
USR = endpoint/from_user
DOM = endpoint/from_domain
PAI = YES(privacy=off), NO(not sent), PRI(privacy=full) (assumes send_pai=yes)
Conditions |Result
--------------------|----------------------------------------------------
TID PRO USR DOM |PAI FROM
--------------------|----------------------------------------------------
Y Y abc def.ghi |PRI "Anonymous" <sip:abc@def.ghi>
Y Y abc |PRI "Anonymous" <sip:abc@anonymous.invalid>
Y Y def.ghi |PRI "Anonymous" <sip:anonymous@def.ghi>
Y Y |PRI "Anonymous" <sip:anonymous@anonymous.invalid>
Y N abc def.ghi |YES <sip:abc@def.ghi>
Y N abc |YES <sip:abc@<ip_address>>
Y N def.ghi |YES "Caller Name" <sip:<caller_exten>@def.ghi>
Y N |YES "Caller Name" <sip:<caller_exten>@<ip_address>>
N Y abc def.ghi |NO "Anonymous" <sip:abc@def.ghi>
N Y abc |NO "Anonymous" <sip:abc@anonymous.invalid>
N Y def.ghi |NO "Anonymous" <sip:anonymous@def.ghi>
N Y |NO "Anonymous" <sip:anonymous@anonymous.invalid>
N N abc def.ghi |YES <sip:abc@def.ghi>
N N abc |YES <sip:abc@<ip_address>>
N N def.ghi |YES "Caller Name" <sip:<caller_exten>@def.ghi>
N N |YES "Caller Name" <sip:<caller_exten>@<ip_address>>
ASTERISK-25791 #close
Reported-by: Anthony Messina
Change-Id: I2c82a5ca1413c2c00fb62ea95b0ae8e97af54dc9
Joshua Colp
George Joseph
Richard Mudgett
Mark Michelson
Joshua Elson
Matt Jordan
zuul
Aaron An
Alexei Gradinari
Alexander Traud
Corey Farrell
George Joseph