This patch adds some of the more recent control frame types to the IAX2
parser. When IAX2 debugging is enabled, it will now show more of the control
frame types.
(closes issue ASTERISK-22120)
Reported by: Birger "WIMPy" Harzenetter
patches:
iaxcmds.diff uploaded by wimpy
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@394895 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This adds CEL support for blind and attended transfers and call pickup.
During the course of adding this functionality I noticed that
CONF_ENTER, CONF_EXIT, and BRIDGE_TO_CONF events are particularly
useless without a bridge identifier, so I added that as well.
This adds tests for blind transfers, several types of attended
transfers, and call pickup.
The extra field in CEL records now consists of a JSON blob whose fields
are defined on a per-event basis.
Review: https://reviewboard.asterisk.org/r/2658/
(closes issue ASTERISK-21565)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@394858 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Adds a new channel driver for creating channels for specific purposes
in bridges, primarily to act as either recorders or announcers. Adds
ARI commands for playing announcements to ever participant in a bridge
as well as for recording a bridge. This patch also includes some
documentation/reponse fixes to related ARI models such as playback
controls.
(closes issue ASTERISK-21592)
Reported by: Matt Jordan
(closes issue ASTERISK-21593)
Reported by: Matt Jordan
Review: https://reviewboard.asterisk.org/r/2670/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@394809 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Temporary peers do not have an associated Stasis endpoint and quite a
bit of code in chan_sip assumes that all peers have a Stasis endpoint.
All endpoint accesses in chan_sip are now wrapped in an endpoint
NULL-check.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@394795 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When a DAHDI device is removed at run-time it sends the event
DAHDI_EVENT_REMOVED on each channel. This is intended to signal the
userspace program to close the respective file handle, as the driver of
the device will need all of them closed to properly clean-up.
This event has long since been handled in chan_dahdi (chan_zap at the
time). However the event that is sent on a D-Channel of a "PRI" (ISDN)
span simply gets ignored.
This commit adds handling for closing the file descriptor (and shutting
down the span, while we're at it).
It also adds a CLI command 'pri destroy span <N>' to destroy the span
and its DAHDI channels.
Review: https://reviewboard.asterisk.org/r/726/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@394552 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The ill conceived chan_agent is no more. It is now replaced by
app_agent_pool.
Agents login using the AgentLogin() application as before. The
AgentLogin() application no longer does any authentication.
Authentication is now the responsibility of the dialplan. (Besides, the
authentication done by chan_agent did not match what the voice prompts
asked for.)
Sample extensions.conf
[login]
; Sample agent 1001 login
; Set COLP for in between calls so the agent does not see the last caller COLP.
exten => 1001,1,Set(CONNECTEDLINE(all)="Agent Waiting" <1001>)
; Give the agent DTMF transfer and disconnect features when connected to a caller.
same => n,Set(CHANNEL(dtmf-features)=TX)
same => n,AgentLogin(1001)
same => n,NoOp(AGENT_STATUS is ${AGENT_STATUS})
same => n,Hangup()
[caller]
; Sample caller direct connect to agent 1001
exten => 800,1,AgentRequest(1001)
same => n,NoOp(AGENT_STATUS is ${AGENT_STATUS})
same => n,Hangup()
; Sample caller going through a Queue to agent 1001
exten => 900,1,Queue(agent_q)
same => n,Hangup()
Sample queues.conf
[agent_q]
member => Local/800@caller,,SuperAgent,Agent:1001
Under the hood operation overview:
1) Logged in agents wait for callers in an agents holding bridge.
2) Caller requests an agent using AgentRequest()
3) A basic bridge is created, the agent is notified, and caller joins the
basic bridge to wait for the agent.
4) The agent is either automatically connected to the caller or must ack
the call to connect.
5) The agent is moved from the agents holding bridge to the basic bridge.
6) The agent and caller talk.
7) The connection is ended by either party.
8) The agent goes back to the agents holding bridge.
To avoid some locking issues with the agent holding bridge, I needed to
make some changes to the after bridge callback support. The after bridge
callback is now a list of requested callbacks with the last to be added
the only active callback. The after bridge callback for failed callbacks
will always happen in the channel thread when the channel leaves the
bridging system or is destroyed.
(closes issue ASTERISK-21554)
Reported by: Matt Jordan
Review: https://reviewboard.asterisk.org/r/2657/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@394417 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Instead of formatting a NULL pointer into a "%s" format string (which is
usually not a good thing to do), we instead print "Unknown".
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@394278 65c4cc65-6c06-0410-ace0-fbb531ad65f3
from mixing different variants or general MFC-R2 settings within the same E1 line.
Most users do not have a problem with this since MFC-R2 lines are usually fractional E1s, or
the whole E1 has the same country variant and R2 settings.
In Venezuela however is common to have inbound MFC-R2 and outbound DTMF-R2 within the same E1.
This fix now properly parses the chan_dahdi.conf file to generate a new openr2 context every
time a new channel => section is found and the configuration was changed.
(closes issue ASTERISK-21117)
Reported by: Rafael Angulo
Related Elastix issue: http://bugs.elastix.org/view.php?id=1612
........
Merged revisions 394106 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 394173 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@394263 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Major changes are to pull all packet reading functions into skinny_session
and move timeout handling to scheduling arrangements. Thread cancelling is
now undertaken directly rather than waiting for the read to timeout
(cleanup is popped on thread cancel). Also added some keepalive timings in
debugging messages.
Keepalive timeout has been increased from 1.1 by keepalive to 3 times
keepalive. This seems to align (after keepalives stabilise) with when
devices reset after not receiving keepalives. Probably needs more work,
especially around the first and/or second keepalives that vary
significantly by device and firmware version.
Review: https://reviewboard.asterisk.org/r/2611/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@394147 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch does the following:
* It merges Jaco Kroon's patch from ASTERISK-20754, which provides channel
information in the RTCP events. Because Stasis provides a cache, Jaco's
patch was modified to pass the channel uniqueid to the RTP layer as
opposed to a pointer to the channel. This has the following benefits:
(1) It keeps the RTP engine 'clean' of references back to channels
(2) It prevents circular dependencies and other potential ref counting issues
* The RTP engine now allows any RTP implementation to raise RTCP messages.
Potentially, other implementations (such as res_rtp_multicast) could also
raise RTCP information. The engine provides structs to represent RTCP headers
and RTCP SR/RR reports.
* Some general refactoring in res_rtp_asterisk was done to try and tame the
RTCP code. It isn't perfect - that's *way* beyond the scope of this work -
but it does feel marginally better.
* A few random bugs were fixed in the RTCP statistics. (Example: performing an
assignment of a = a is probably not correct)
* We now raise RTCP events for each SR/RR sent/received. Previously we wouldn't
raise an event when we sent a RR report.
Note that this work will be of use to others who want to monitor call quality
or build modules that report call quality statistics. Since the events are now
moving across the Stasis message bus, this is far easier to accomplish. It is
also a first step (though by no means the last step) towards getting Olle's
pinefrog work incorporated.
Again: note that the patch by Jaco Kroon was modified slightly for this work;
however, he did all of the hard work in finding the right places to set the
channel in the RTP engine across the channel drivers. Much thanks goes to Jaco
for his hard work here.
Review: https://reviewboard.asterisk.org/r/2603/
(closes issue ASTERISK-20574)
Reported by: Jaco Kroon
patches:
asterisk-rtcp-channel.patch uploaded by jkroon (License 5671)
(closes issue ASTERISK-21471)
Reported by: Matt Jordan
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@393740 65c4cc65-6c06-0410-ace0-fbb531ad65f3
There was a misunderstanding about ast_bridge_impart()'s handling of the
imparted channel's reference. The channel reference is passed by the
caller unless ast_bridge_impart() returns an error.
* Fixed a memory leak in conf_announce_channel_push() if the impart
failed.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@392934 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch fixes the following memory leaks:
* http.c: The structure containing the addresses to bind to was not being
deallocated when no longer used
* named_acl.c: The global configuration information was not disposed of
* config_options.c: An invalid read was occurring for certain option types.
* res_calendar.c: The loaded calendars on module unload were not being
properly disposed of.
* chan_motif.c: The format capabilities needed to be disposed of on module
unload. In addition, this now specifies the default options for the
maxpayloads and maxicecandidates in such a way that it doesn't cause the
invalid read in config_options.c to occur.
(issue ASTERISK-21906)
Reported by: John Hardin
patches:
http.patch uploaded by jhardin (license 6512)
named_acl.patch uploaded by jhardin (license 6512)
config_options.patch uploaded by jhardin (license 6512)
res_calendar.patch uploaded by jhardin (license 6512)
chan_motif.patch uploaded by jhardin (license 6512)
........
Merged revisions 392810 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@392812 65c4cc65-6c06-0410-ace0-fbb531ad65f3
1. Security events
2. Websocket support
3. Diversion header + redirecting support
4. An anonymous endpoint identifier
5. Inbound extension state subscription support
6. PIDF notify generation
7. One touch recording support (special thanks Sean Bright!)
8. Blind and attended transfer support
9. Automatic inbound registration expiration
10. SRTP support
11. Media offer control dialplan function
12. Connected line support
13. SendText() support
14. Qualify support
15. Inband DTMF detection
16. Call and pickup groups
17. Messaging support
Thanks everyone!
Side note: I'm reminded of the song "How Far We've Come" by Matchbox Twenty.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@392565 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch is the initial push to update Asterisk's CDR engine for the new
bridging framework. This patch guts the existing CDR engine and builds the new
on top of messages coming across Stasis. As changes in channel state and bridge
state are detected, CDRs are built and dispatched accordingly. This
fundamentally changes CDRs in a few ways.
(1) CDRs are now *very* reflective of the actual state of channels and bridges.
This means CDRs track well with what an actual channel is doing - which
is useful in transfer scenarios (which were previously difficult to pin
down). It does, however, mean that CDRs cannot be 'fooled'. Previous
behavior in Asterisk allowed for CDR applications, channels, and other
properties to be spoofed in parts of the code - this no longer works.
(2) CDRs have defined behavior in multi-party scenarios. This behavior will not
be what everyone wants, but it is a defined behavior and as such, it is
predictable.
(3) The CDR manipulation functions and applications have been overhauled. Major
changes have been made to ResetCDR and ForkCDR in particular. Many of the
options for these two applications no longer made any sense with the new
framework and the (slightly) more immutable nature of CDRs.
There are a plethora of other changes. For a full description of CDR behavior,
see the CDR specification on the Asterisk wiki.
(closes issue ASTERISK-21196)
Review: https://reviewboard.asterisk.org/r/2486/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@391947 65c4cc65-6c06-0410-ace0-fbb531ad65f3
1). When touching the bridgecallno, we need to lock it.
2). stop_stuff() which calls iax2_destroy_helper()
Assumes the lock on the pvt is already held, when iax2_destroy_helper() is called.
Thus we need to lock the bridgecallno pvt before we call stop_stuff(iaxs[fr->callno]->bridgecallno);
3). When evaluating the state of 'callno->transferring' of the current leg,
we can't change it to READY unless the bridgecallno is locked.
Why, if we are interrupted by the other call leg before 'transferring = TRANSFER_RELEASED',
the interrupt will find that it is READY and that the bridgecallno is also READY so Releases the legs.
(closes issue ASTERISK-21409)
Reported by: alecdavis
Tested by: alecdavis
alecdavis (license 585)
Review https://reviewboard.asterisk.org/r/2594/
........
Merged revisions 391062 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 391063 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@391064 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Features configuration is handled in its own API in
features_config.h and features_config.c. This way, features
configuration is accessible to anything that needs it.
In addition, features configuration has been altered to
be more channel-oriented. Most callers of features API
code will be supplying a channel so that the individual
channel's settings will be acquired rather than the global
setting.
Missing from this commit is XML documentation for the
features configuration. That will be handled in a separate
commit.
Review: https://reviewboard.asterisk.org/r/2578/
(issue ASTERISK-21542)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@390751 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The attended transfer API call can complete the attended transfer in a number of ways
depending on the current bridged states of the channels involved.
The hiding of masquerades is done in some bridging-related functions, such as the manager
Bridge action and the Bridge dialplan application. In addition, call pickup was edited
to "move" a channel rather than masquerade it.
Review: https://reviewboard.asterisk.org/r/2511
(closes issue ASTERISK-21334)
Reported by Matt Jordan
(closes issue Asterisk-21336)
Reported by Matt Jordan
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@389848 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch moves a number of AMI events over to the Stasis-Core message bus.
This includes:
* ChanSpyStart/Stop
* MonitorStart/Stop
* MusicOnHoldStart/Stop
* FullyBooted/Reload
* All Voicemail/MWI related events
In addition, it adds some Stasis-Core and AMI support for generic AMI messages,
refactors the message router in AMI to use a single router with topic
forwarding for the topics that AMI cares about, and refactors MWI message
types and topics to be more name compliant.
Review: https://reviewboard.asterisk.org/r/2532
(closes issue ASTERISK-21462)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@389733 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Breaks many things until they can be reworked. A partial list:
chan_agent
chan_dahdi, chan_misdn, chan_iax2 native bridging
app_queue
COLP updates
DTMF attended transfers
Protocol attended transfers
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@389378 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Matthew Jordan
Kinsey Moore
Jonathan Rose
Mark Michelson
Tzafrir Cohen
Richard Mudgett
Moises Silva
Jason Parker
David M. Lee
Damien Wedhorn
Igor Goncharovskiy
Joshua Colp
Alec L Davis