Commit 1bce690ccb was incrementing txcount
for rtcp packets as well as rtp packets and that was causing sender reports
to be generated instead of receiver reports in cases where no rtp was actually
being sent.
Moved the txcount increment from __rtp_sento, which handles both rtp and rtcp,
to rtp_sento which only handles rtp packets.
Discovered by the hep/rtcp-receiver test.
Change-Id: Ie442e4bb947a68847a676497021ba10ffaf376d5
Asterisk uses separate UDP ports for RTP and RTCP traffic and RFC 5764
explicitly states:
There MUST be a separate DTLS-SRTP session for each distinct pair of
source and destination ports used by a media session
This means RTP keying material cannot be used for DTLS RTCP, which was
the reason why RTCP encryption would fail.
ASTERISK-25642
Change-Id: I7e8779d8b63e371088081bb113131361b2847e3a
rxcount, txcount, rxoctetcount and txoctetcount weren't being calculated
for bridged streams because the calulations were being done after the
bridged short-circuit. Actually, rxoctetcount wasn't ever being calculated.
Moved the calculations so they occur for all valid received packets and
all transmitted packets. Also added rxoctetcount and txoctetcount to
ast_rtp_instance_stat.
Change-Id: I08fb06011a82d38c3b4068867a615068fbe59cbb
During ICE negotiation the IPs of the local interfaces are sent to the remote
peer as host candidates. In many cases Asterisk is behind a static one-to-one
NAT, so these host addresses will be internal IP addresses.
To help in hiding the topology of the internal network, this patch adds the
ability to override the host candidates by matching them against a
user-defined list of replacements.
Change-Id: I1c9541af97b83a4c690c8150d19bf7202c8bff1f
Due to locking issues within pjnath these changes are being
reverted until pjnath can be changed.
ASTERISK-25645
Revert "res_rtp_asterisk.c: Fix DTLS negotiation delays."
This reverts commit 24ae124e4f.
Change-Id: I2986cfb2c43dc14455c1bcaf92c3804f9da49705
Revert "res_rtp_asterisk: Resolve further timing issues with DTLS negotiation"
This reverts commit 965a0eee46.
Change-Id: Ie68fafde27dad4b03cb7a1e27ce2a8502c3f7bbe
Resolves an edge case dtls negotiation delay for certain networks which
somehow manage to drop the rtcp side's packet when these are both sent
ast_rtp_remote_address_set, causing it to have to time-out and restart
the handshake.
Move dtls pending bio flush in to it's own function, and call it from
ast_rtp_on_ice_complete, when we're rtp->ice, rather than when
ast_rtp_remote_address_set.
Keep the existing flush from the recent change to res_rtp_remote_address_set
if ice is not being used.
ASTERISK-25614 #close
Reported-by: XenCALL
Tested by: XenCALL
Change-Id: Ie2caedbdee1783159f375589b6fd3845c8577ba5
- Trigger pending DTLS packets to send out, once the RTP instance's remote
address is set.
- Avoids locking the DTLS structure unnecessarily by only doing this if
DTLS is passive.
- Add DTLS locks around the structurally sensitive calls in the SSL
portion of __rtp_recvfrom, since dtls_srtp_check_pending does not lock
inside of itself, and we're dealing with the SSL BIO in at least two
threads.
WebRTC channels may receive a DTLS handshake before
ast_rtp_remote_address_set is called, which causes there to be a pending
response to send out. Previous to 1ad827, this was handled by calling
dtls_srtp_check_pending on receipt of any RTP packet - a STUN or RTP
packet could trigger the pending handshake response. Since that was
rightfully removed, whenever the DTLS handshake is received before the
remote address is set, we would have to wait until another SSL packet
arrives.
As of Chrome M47's optimizations to their handshake process, WebRTC
conversations between Chrome M47+ and Asterisk, where Asterisk is passive,
experience a 1 second delay without this patch, because the SSL handshake
is received before ICE negotation stores the remote_address, and the next
SSL packet isn't received until after a 1 second timeout in Chrome, which
causes a new handshake request.
ASTERISK-25614 #close
Change-Id: I547f1be7e302dbf71f6553dd8cbc0657b1d0b908
When ASTERISK-25449 was closed, a number of scheduler issues mentioned in
the comments were missed. These have since beed raised in ASTERISK-25476
and elsewhere.
This patch attempts to collect all of the scheduler issues discovered so
far and address them sensibly.
ASTERISK-25476 #close
Change-Id: I87a77d581e2e0d91d33b4b2fbff80f64a566d05b
In ast_rtp_read, the value of the variable 'mark' which we try to assign to a
frame->subclass.frame_ending may be 0, 1 or (1<<23), but we should translate
it to 0 or 1.
ASTERISK-25451 #close
Change-Id: I53bdf5c026041730184a6a809009c028549ce626
When we decide we will no longer schedule an RTCP write, we remove the
reference to the RTP instance, then assign -1 to the stored scheduler ID
in case something else comes along and wants to see if anything is scheduled.
That scheduler ID is on the RTP instance. After 60a9172d7e was merged to
fix the regression introduced by 3cf0f29310, this improper assignment on a
potentially destroyed object started getting tripped on the build agents.
Frankly, this should have been crashing a lot more often earlier. I can only
assume that the timing was changed just enough by both changes to start
actually hitting this problem.
As it is, simply moving the assignment prior to the ao2 deference is sufficient
to keep the RTP instance from being referenced when it is very, truly,
aboslutely dead.
(Note that it is still good practice to assign -1 to the scheduler ID when we
know we won't be scheduling it again, as the ao2 deref *may* not always destroy
the ao2 object.)
ASTERISK-25449
Change-Id: Ie6d3cb4adc7b1a6c078b1c38c19fc84cf787cda7
When 5c713fdf18 was merged, it allowed for scheduled items to have an ID of
'0' returned. While this was valid per the documentation for the API, it was
apparently never returned previously. As a result, several users of the
scheduler API viewed the result as being invalid, causing them to reschedule
already scheduled items or otherwise fail in interesting ways.
This patch corrects the users such that they view '0' as valid, and a returned
ID of -1 as being invalid.
Note that the failing HEP RTCP tests now pass with this patch. These tests
failed due to a duplicate scheduling of the RTCP transmissions.
ASTERISK-25449 #close
Change-Id: I019a9aa8b6997584f66876331675981ac9e07e39
In practice the set_role API callback can be invoked even
when no ICE is present on an RTP instance. This can occur
if ICE has not been enabled on it.
ASTERISK-25438 #close
Change-Id: I0e17e4316f0f0d7f095c78c3d4fd73a913b6ba69
In working through a recent ICE negotiation bug, I found the debug
logging in res_rtp_asterisk to be lacking. This patch adds a number of
debug and warning statements that were helpful.
Change-Id: I950c6d8f13a41f14b3d6334b4cafe7d4e997be80
We were passing the wrong count into pj_ice_sess_create_check_list(),
causing the create to fail if we ever received more than PJ_ICE_MAX_CAND
candidates.
Change-Id: I0303d8e1ecb20a8de9fe629a3209d216c4028378
There are numerous problems with the current implementation of the RTP
payload type mapping in Asterisk. It uses only one mapping structure to
associate payload types to codecs. The single mapping is overkill if all
of the payload type values are well known values. Dynamic payload type
mappings do not work as well with the single mapping because RFC3264
allows each side of the link to negotiate different dynamic mappings for
what they want to receive. Not only could you have the same codec mapped
for sending and receiving on different payload types you could wind up
with the same payload type mapped to different codecs for each direction.
1) An independent payload type mapping is needed for sending and
receiving.
2) The receive mapping needs to keep track of previous mappings because of
the slack to when negotiation happens and current packets in flight using
the old mapping arrive.
3) The transmit mapping only needs to keep track of the current negotiated
values since we are sending the packets and know when the switchover takes
place.
* Needed to create ast_rtp_codecs_payload_code_tx() and make some callers
use the new function because ast_rtp_codecs_payload_code() was used for
mappings in both directions.
* Needed to create ast_rtp_codecs_payloads_xover() for cases where we need
to pass preferred codec mappings to the peer channel for early media
bridging or when we need to prefer the offered mapping that RFC3264 says
we SHOULD use.
* ast_rtp_codecs_payloads_xover() and ast_rtp_codecs_payload_code_tx() are
the only new public functions created. All the others were only used for
the tx or rx mapping direction so the function doxygen now reflects which
direction the function operates.
* chan_mgcp.c: Removed call to ast_rtp_codecs_payloads_clear() as doing
that makes no sense when processing an incoming SDP. We would be wiping
out any mappings that we set for the possible outgoing SDP we sent
earlier.
ASTERISK-25166
Reported by: Kevin Harwell
ASTERISK-17410
Reported by: Boris Fox
Change-Id: Iaf6c227bca68cb7c414cf2fd4108a8ac98bd45ac
A change recently went in which enabled perfect forward secrecy for
DTLS in res_rtp_asterisk. This was accomplished two different ways
depending on the availability of a feature in OpenSSL. The fallback
method created a temporary instance of a key but did not free it.
This change fixes that.
ASTERISK-25265
Change-Id: Iadc031b67a91410bbefb17ffb4218d615d051396
This will add ECDH support to Asterisk. It will
detect auto ECDH support in OpenSSL
(1.0.2b and above) during ./configure. If this is
available, it will use it,
otherwise it will fall back to prime256v1 (this
behavior is consistent with
other projects such as Apache and nginx).
This fixes WebRTC being broken in Firefox 38+ due
to Firefox now only supporting
ciphers with perfect forward secrecy.
ASTERISK-25265 #close
Change-Id: I8c13b33a2a79c0bde2e69e4ba6afa5ab9351465b
This adds an "rtp_keepalive" option for PJSIP endpoints. Similar to the
chan_sip option, this specifies an interval, in seconds, at which we
will send RTP comfort noise frames. This can be useful for keeping RTP
sessions alive as well as keeping NAT associations alive during lulls.
ASTERISK-25242 #close
Reported by Mark Michelson
Change-Id: I3b9903d99e35fe5d0b53ecc46df82c750776bc8d
This change fixes a bug where the DTLS timeout timer would be
initialized to 0 if DTLS was not used for an RTP session.
ASTERISK-25103
Change-Id: If8d26bb054f1d300838850da5b8db9044c2fe2ac
This change moves logic for setting up the DTLS SSL contexts to
when the SDP is done being processed instead of when ICE negotiation
completes. It also stops handshakes from being initiated when we
are acting as a server.
Manipulating the SSL context when ICE negotiation has completed
is problematic as the SSL context is not protected and if acting
as a client the remote side may have started DTLS negotiation
already.
The retransmission timeout timer code has also been split up
and simplified some. Both RTP and RTCP now have their own timers
and the points at which the timer is stopped and started is now
more specific. When a packet is sent the timer is started. When
a response is received but before it is processed the timer is
stopped. This provides a guarantee that the timeout is not
occurring while the response is processed.
ASTERISK-22805 #close
ASTERISK-24550 #close
ASTERISK-24651 #close
ASTERISK-24832 #close
ASTERISK-25103 #close
ASTERISK-25127 #close
Change-Id: Ib75ea2546f29d6efc3d2d37c58df6986c7bd9b91
First byte of DTLS packet shall be in range 20-63, not 20-64. Refer to RFC
https://tools.ietf.org/html/rfc5764#section-5.1.2 for correct values.
Change-Id: Iae6fa0d72b37c36a27fe40686e0ae6fba3afec31
While trying to get WebRTC working with chan_pjsip, I was running
into the following error:
Attempted to set an invalid DTLS-SRTP configuration on RTP
instance...
Josh helpfully pointed out that res_srtp.so might not be loaded, and
sure enough, it wasn't. This patch adds a ERROR indiciating as much
to hopefully help others having a similar problem.
Change-Id: I13aa477b47b299876728a21b130998a0ea6cd19f
ao2 ref leak in res_rtp_asterisk.c when a DTLS policy is created.
The resources are linked into a table, but the original alloc refs
are never released. ast_strdup leak in rtp_engine.c. If
ast_rtp_dtls_cfg_copy() is called twice on the same destination struct,
a pointer to an alloc'd string is overwritten before the string is free'd.
ASTERISK-25022
Reported by: one47
Change-Id: I62a8ceb8679709f6c3769136dc6aa9a68202ff9b
Git does not support the ability to replace a token with a version
string during check-in. While it does have support for replacing a
token on clone, this is somewhat sub-optimal: the token is replaced
with the object hash, which is not particularly easy for human
consumption. What's more, in practice, the source file version was often
not terribly useful. Generally, when triaging bugs, the overall version
of Asterisk is far more useful than an individual SVN version of a file. As a
result, this patch removes Asterisk's support for showing source file
versions.
Specifically, it does the following:
* Rename ASTERISK_FILE_VERSION macro to ASTERISK_REGISTER_FILE, and
remove passing the version in with the macro. Other facilities
than 'core show file version' make use of the file names, such as
setting a debug level only on a specific file. As such, the act of
registering source files with the Asterisk core still has use. The
macro rename now reflects the new macro purpose.
* main/asterisk:
- Refactor the file_version structure to reflect that it no longer
tracks a version field.
- Remove the "core show file version" CLI command. Without the file
version, it is no longer useful.
- Remove the ast_file_version_find function. The file version is no
longer tracked.
- Rename ast_register_file_version/ast_unregister_file_version to
ast_register_file/ast_unregister_file, respectively.
* main/manager: Remove value from the Version key of the ModuleCheck
Action. The actual key itself has not been removed, as doing so would
absolutely constitute a backwards incompatible change. However, since
the file version is no longer tracked, there is no need to attempt to
include it in the Version key.
* UPGRADE: Add notes for:
- Modification to the ModuleCheck AMI Action
- Removal of the "core show file version" CLI command
Change-Id: I6cf0ff280e1668bf4957dc21f32a5ff43444a40e
When RTCP debugging was enabled, an RTCP report without a report block would
cause a crash. This was due to the verbose output not checking to see if the
report_block pointer was NULl before dereferencing it.
This patch adds the necessary check to prevent printing any verbose output
if the far side hasn't provided us the information they should have.
ASTERISK-24791 #close
Reported by: JoshE
Tested by: JoshE
........
Merged revisions 431879 from http://svn.asterisk.org/svn/asterisk/branches/13
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@431880 65c4cc65-6c06-0410-ace0-fbb531ad65f3
A recent security fix for OpenSSL broke DTLS negotiation for many
applications. This was caused by read ahead not being enabled when it
should be. While a commit has gone into OpenSSL to force read ahead
on for DTLS it may take some time for a release to be made and the
change to be present in distributions (if at all). As enabling read
ahead is a simple one line change this commit does that and fixes
the issue.
ASTERISK-24711 #close
Reported by: Jared Biel
........
Merged revisions 431384 from http://svn.asterisk.org/svn/asterisk/branches/11
........
Merged revisions 431385 from http://svn.asterisk.org/svn/asterisk/branches/13
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@431386 65c4cc65-6c06-0410-ace0-fbb531ad65f3
In r413586 (1.8) various casts were added to silence gcc 4.10 warnings.
Those fixes included things like:
-out += sprintf(out, "%%%02X", (unsigned char) *ptr);
+out += sprintf(out, "%%%02X", (unsigned) *ptr);
That works for low ascii characters, but for the high range that yields
e.g. FFFFFFC3 when C3 is expected.
This changeset:
- fixes those casts to use the 'hh' unsigned char modifier instead
- consistently uses %02x instead of %2.2x (or other non-standard usage)
- adds a few 'h' modifiers in various places
- fixes a 'replcaes' typo
- dev/urandon typo (in 13+ patch)
Review: https://reviewboard.asterisk.org/r/4263/
ASTERISK-24619 #close
Reported by: Stefan27 (on IRC)
........
Merged revisions 429673 from http://svn.asterisk.org/svn/asterisk/branches/11
........
Merged revisions 429674 from http://svn.asterisk.org/svn/asterisk/branches/12
........
Merged revisions 429675 from http://svn.asterisk.org/svn/asterisk/branches/13
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@429683 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When endpoints with direct_media enabled, behind a firewall (Asterisk on a
separate network) and were bridged sometimes Asterisk would send the ip
address of the firewall in the sdp to one of the phones in the reinvite
resulting in one way audio. When sending the reinvite Asterisk will retrieve
the media address from the associated rtp instance, but if frames were being
read this can be overwritten with another address (in this case the
firewall's). This patch ensures that Asterisk uses the original device
address when using direct media.
ASTERISK-24563
Reported by: Steve Pitts
Review: https://reviewboard.asterisk.org/r/4216/
........
Merged revisions 429195 from http://svn.asterisk.org/svn/asterisk/branches/12
........
Merged revisions 429196 from http://svn.asterisk.org/svn/asterisk/branches/13
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@429197 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When starting ice if there is not at least one remote ice candidate with an RTP
component asterisk will crash. This is due to an assertion in pjnath as it
expects at least one candidate with an RTP component. Added a check to make
sure at least one candidate contains an RTP component and at least one candidate
has an RTCP component.
ASTERISK-24383 #close
Review: https://reviewboard.asterisk.org/r/4039/
........
Merged revisions 425031 from http://svn.asterisk.org/svn/asterisk/branches/13
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@425032 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This gets rid of most old libc free/malloc/realloc and replaces them
with ast_free and friends. When compiling with MALLOC_DEBUG you'll
notice it when you're mistakenly using one of the libc variants. For
the legacy cases you can define WRAP_LIBC_MALLOC before including
asterisk.h.
Even better would be if the errors were also enabled when compiling
without MALLOC_DEBUG, but that's a slightly more invasive header
file change.
Those compiling addons/format_mp3 will need to rerun
./contrib/scripts/get_mp3_source.sh.
ASTERISK-24348 #related
Review: https://reviewboard.asterisk.org/r/4015/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@423978 65c4cc65-6c06-0410-ace0-fbb531ad65f3
1. The number of file descriptors an ioqueue instance can handle is fixed, so we
now spawn the required number to handle the load.
2. Our transport identifiers were exceeding the range supported by pjnath.
3. The TURN client did not set up client binding causing needless bandwidth usage.
4. The code no longer updates address information on each packet.
5. STUN traffic was getting looped back to Asterisk instead of going through the
TURN server.
6. Synchronization now ensures things are completely setup or destroyed.
7. Logging now reflects the target the TURN server is sending to/receiving from
on our behalf.
ASTERISK-23577 #close
Reported by: Jay Jideliov
ASTERISK-23634 #close
Reported by: Roman Skvirsky
Review: https://reviewboard.asterisk.org/r/3982/
........
Merged revisions 423150 from http://svn.asterisk.org/svn/asterisk/branches/11
........
Merged revisions 423151 from http://svn.asterisk.org/svn/asterisk/branches/12
........
Merged revisions 423152 from http://svn.asterisk.org/svn/asterisk/branches/13
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@423153 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch adds a new module to Asterisk, res_hep_rtcp. The module subscribes
to the RTCP topics in Stasis and receives RTCP information back from the
message bus. It encodes into HEPv3 packets and sends the information to the
res_hep module for transmission.
Using this, someone with a Homer server can get live call quality monitoring
for all RTP-based channels in their Asterisk 12+ systems.
In addition, there were a few bugs in the RTP engine, res_rtp_asterisk, and
chan_pjsip that were uncovered by the tests written for the Asterisk Test
Suite. This patch fixes the following:
1) chan_pjsip failed to set its channel unique ids on its RTP instance on
outbound calls. It now does this in the appropriate location, in the
serialized call callback.
2) The rtp_engine was overflowing some values when packed into JSON.
Specifically, some longs and unsigned ints can't be be packed into integer
values, for obvious reasons. Since libjansson only supports integers,
floats, strings, booleans, and objects, we print these values into strings.
3) res_rtp_asterisk had a few problems:
(a) it would emit a source IP address of 0.0.0.0 if bound to that IP
address. We now use ast_find_ourip to get a better IP address, and
properly marshal the result into an ast_strdupa'd string.
(b) Reports can be generated with no report bodies. In particular, this
occurs when a sender is transmitting information to a receiver (who
will send no RTP back to the sender). As such, the sender has no report
body for what it received. We now properly handle this case, and the
sender will emit SR reports with no body. Likewise, if we receive an
RTCP packet with no report body, we will still generate the appropriate
events.
ASTERISK-24119 #close
........
Merged revisions 419823 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@419825 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Joshua Colp
George Joseph
Jacek Konieczny
Sean Bright
Kevin Harwell
Dade Brandon
server-pandora
Steve Davies
StefanEng86
Matt Jordan
David M. Lee
Richard Mudgett
Mark Duncan
Mark Michelson
Rodrigo Ramírez Norambuena
Yousf Ateya
Sean Bright
Walter Doekes