This patch is the initial push to update Asterisk's CDR engine for the new
bridging framework. This patch guts the existing CDR engine and builds the new
on top of messages coming across Stasis. As changes in channel state and bridge
state are detected, CDRs are built and dispatched accordingly. This
fundamentally changes CDRs in a few ways.
(1) CDRs are now *very* reflective of the actual state of channels and bridges.
This means CDRs track well with what an actual channel is doing - which
is useful in transfer scenarios (which were previously difficult to pin
down). It does, however, mean that CDRs cannot be 'fooled'. Previous
behavior in Asterisk allowed for CDR applications, channels, and other
properties to be spoofed in parts of the code - this no longer works.
(2) CDRs have defined behavior in multi-party scenarios. This behavior will not
be what everyone wants, but it is a defined behavior and as such, it is
predictable.
(3) The CDR manipulation functions and applications have been overhauled. Major
changes have been made to ResetCDR and ForkCDR in particular. Many of the
options for these two applications no longer made any sense with the new
framework and the (slightly) more immutable nature of CDRs.
There are a plethora of other changes. For a full description of CDR behavior,
see the CDR specification on the Asterisk wiki.
(closes issue ASTERISK-21196)
Review: https://reviewboard.asterisk.org/r/2486/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@391947 65c4cc65-6c06-0410-ace0-fbb531ad65f3
1). When touching the bridgecallno, we need to lock it.
2). stop_stuff() which calls iax2_destroy_helper()
Assumes the lock on the pvt is already held, when iax2_destroy_helper() is called.
Thus we need to lock the bridgecallno pvt before we call stop_stuff(iaxs[fr->callno]->bridgecallno);
3). When evaluating the state of 'callno->transferring' of the current leg,
we can't change it to READY unless the bridgecallno is locked.
Why, if we are interrupted by the other call leg before 'transferring = TRANSFER_RELEASED',
the interrupt will find that it is READY and that the bridgecallno is also READY so Releases the legs.
(closes issue ASTERISK-21409)
Reported by: alecdavis
Tested by: alecdavis
alecdavis (license 585)
Review https://reviewboard.asterisk.org/r/2594/
........
Merged revisions 391062 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 391063 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@391064 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Features configuration is handled in its own API in
features_config.h and features_config.c. This way, features
configuration is accessible to anything that needs it.
In addition, features configuration has been altered to
be more channel-oriented. Most callers of features API
code will be supplying a channel so that the individual
channel's settings will be acquired rather than the global
setting.
Missing from this commit is XML documentation for the
features configuration. That will be handled in a separate
commit.
Review: https://reviewboard.asterisk.org/r/2578/
(issue ASTERISK-21542)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@390751 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The attended transfer API call can complete the attended transfer in a number of ways
depending on the current bridged states of the channels involved.
The hiding of masquerades is done in some bridging-related functions, such as the manager
Bridge action and the Bridge dialplan application. In addition, call pickup was edited
to "move" a channel rather than masquerade it.
Review: https://reviewboard.asterisk.org/r/2511
(closes issue ASTERISK-21334)
Reported by Matt Jordan
(closes issue Asterisk-21336)
Reported by Matt Jordan
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@389848 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch moves a number of AMI events over to the Stasis-Core message bus.
This includes:
* ChanSpyStart/Stop
* MonitorStart/Stop
* MusicOnHoldStart/Stop
* FullyBooted/Reload
* All Voicemail/MWI related events
In addition, it adds some Stasis-Core and AMI support for generic AMI messages,
refactors the message router in AMI to use a single router with topic
forwarding for the topics that AMI cares about, and refactors MWI message
types and topics to be more name compliant.
Review: https://reviewboard.asterisk.org/r/2532
(closes issue ASTERISK-21462)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@389733 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Breaks many things until they can be reworked. A partial list:
chan_agent
chan_dahdi, chan_misdn, chan_iax2 native bridging
app_queue
COLP updates
DTMF attended transfers
Protocol attended transfers
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@389378 65c4cc65-6c06-0410-ace0-fbb531ad65f3
CallforwardNoAnswer uses a sched to determine when to forward the call.
Defaults to 20secs but configurable in skinny.conf.
Adds dialType to each subchannel structure to be used to differentiate
between normal dials that result in a call being placed (default) and
other uses for the skinny_dialer (such as cfwd digit collection).
Restructured all cfwd handling to use this new arrangement.
(closes issue ASTERISK-21292)
Reported by: wedhorn
Tested by: myself
Patches:
skinny-callfwdnoans03.diff uploaded by wedhorn (license 5019)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@389097 65c4cc65-6c06-0410-ace0-fbb531ad65f3
In r388005, macros were introduced to consistently define message
types. This added an assert if a message type was used either before
it was initialized or after it had been cleaned up. It turns out that
this assertion fires during shutdown.
This actually exposed a hidden shutdown ordering problem. Since
unsubscribing is asynchronous, it's possible that the message types
used by the subscription could be freed before the final message of
the subscription was processed.
This patch adds stasis_subscription_join(), which blocks until the
last message has been processed by the subscription. Since joining was
most commonly done right after an unsubscribe, a
stasis_unsubscribe_and_join() convenience function was also added.
Similar functions were also added to the stasis_caching_topic and
stasis_message_router, since they wrap subscriptions and have similar
problems.
Other code in trunk was refactored to join() where appropriate, or at
least verify that the subscription was complete before being
destroyed.
Review: https://reviewboard.asterisk.org/r/2540
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@389011 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Currently, the buffer for processing "inkeys" is limited to 256 characters. If
the user has many keys and the names of those key files are long, the 256
character limit is not enough.
* Change inkeys buffer to be dynamic
(closes issue ASTERISK-21398)
Reported by: Pavel Kopchyk
Tested by: Pavel Kopchyk, Michael L. Young
Patches:
asterisk-21398-iax2-inkeys-dynamic-buffer_v3.diff
by Michael L. Young (license 5026)
Review: https://reviewboard.asterisk.org/r/2501/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@389009 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The prior code committed, r385473, failed to take into consideration that not
all outgoing calls will be to a peer. My fault.
This patch does the following:
* Check if there is a related peer involved. If there is, check and set NAT
settings according to the peer's settings.
* Fix a problem with realtime peers. If the global setting has auto_force_rport
set and we issued a "sip reload" while a peer is still registered, the peer's
flags for NAT are reset to off. When this happens, we were always setting the
contact address of the peer to that of the full contact info that we had.
(closes issue ASTERISK-21374)
Reported by: jmls
Tested by: Michael L. Young
Patches:
asterisk-21374-fix-crash-and-rt-peers.diff by Michael L. Young (license 5026)
Review: https://reviewboard.asterisk.org/r/2524/
........
Merged revisions 388601 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@388602 65c4cc65-6c06-0410-ace0-fbb531ad65f3
An endpoint is an external device/system that may offer/accept
channels to/from Asterisk. While this is a very useful concept for end
users, it is surprisingly not a core concept within Asterisk itself.
This patch defines ast_endpoint as a separate object, which channel
drivers may use to expose their concept of an endpoint. As the channel
driver creates channels, it can use ast_endpoint_add_channel() to
associate channels to the endpoint. This updated the endpoint
appropriately, and forwards all of the channel's events to the
endpoint's topic.
In order to avoid excessive locking on the endpoint object itself, the
mutable state is not accessible via getters. Instead, you can create a
snapshot using ast_endpoint_snapshot_create() to get a consistent
snapshot of the internal state.
This patch also includes a set of topics and messages associated with
endpoints, and implementations of the endpoint-related RESTful
API. chan_sip was updated to create endpoints with SIP peers, but the
state of the endpoints is not updated with the state of the peer.
Along for the ride in this patch is a Stasis test API. This is a
stasis_message_sink object, which can be subscribed to a Stasis
topic. It has functions for blocking while waiting for conditions in
the message sink to be fulfilled.
(closes issue ASTERISK-21421)
Review: https://reviewboard.asterisk.org/r/2492/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@387932 65c4cc65-6c06-0410-ace0-fbb531ad65f3
RFC6665 4.2.2: ... after a failed State NOTIFY transaction remove the subscription
The problem is that the State Notify requests rely on the 200OK reponse for pacing control
and to not confuse the notify susbsystem.
The issue is, the pendinginvite isn't cleared if a response isn't received,
thus further notify's are never sent.
The solution, follow RFC 6665 4.2.2's 'SHOULD' and remove the subscription after failure.
(closes issue ASTERISK-21677)
Reported by: Dan Martens
Tested by: alecdavis
alecdavis (license 585)
Review https://reviewboard.asterisk.org/r/2475/
........
Merged revisions 387875 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 387880 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@387885 65c4cc65-6c06-0410-ace0-fbb531ad65f3
RFC 4028 Section 10
if the side not performing refreshes does not receive a
session refresh request before the session expiration, it SHOULD send
a BYE to terminate the session, slightly before the session
expiration. The minimum of 32 seconds and one third of the session
interval is RECOMMENDED.
Prior to this asterisk would refresh at 1/2 the Session-Expires interval,
or if the remote device was the refresher, asterisk would timeout at interval end.
Now, when not refresher, timeout as per RFC noted above.
(closes issue ASTERISK-21742)
Reported by: alecdavis
Tested by: alecdavis
alecdavis (license 585)
Review https://reviewboard.asterisk.org/r/2488/
........
Merged revisions 387344 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 387345 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@387369 65c4cc65-6c06-0410-ace0-fbb531ad65f3
RFC 4028 Section 7.2
"UACs MUST be prepared to receive a Session-Expires header field in a
response, even if none were present in the request."
What changed
After ASTERISK-20787, inbound calls to asterisk with no Session-Expires in the INVITE are now are offered
a Session-Expires (1800 asterisk default) in the response, with asterisk as the refresher.
Symptom:
After 900 seconds (asterisk default refresher period 1800), asterisk RE-INVITEs the device, the device
may respond with a much lower Session-Expires (180 in our case) value that it is now using.
Asterisk ignores this response, as it's deemed both an INBOUND CALL, and a RE-INVITE.
After 180 seconds the device times out and sends BYE (hangs up), asterisk is still working with the
refresher period of 1800 as it ignored the 'Session Expires: 180' in the previous 200OK response.
Fix:
handle_response_invite() when 200OK, remove check for outbound and reinvite.
(closes issue ASTERISK-21664)
Reported by: alecdavis
Tested by: alecdavis
alecdavis (license 585)
Review https://reviewboard.asterisk.org/r/2463/
........
Merged revisions 387312 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 387319 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@387327 65c4cc65-6c06-0410-ace0-fbb531ad65f3
* Remove t and ama local variables. There is no way they could be
anything other than default because p->owner can only be NULL at this
point.
* Rename tmp and tmp2 to owner and chan respectively.
* Remove redundant initialization of channel context, exten, priority.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@387260 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Pretending that chan_local locals container can have more than one bucket
is silly. The container has no key to help search.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@387211 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When you have lots of SIP peers (according to the issue reporter, around 3500),
the 'sip show peers' CLI command or AMI action can crash due to a poorly placed
string duplication that occurs on the stack. This patch refactors the command
to not allocate the string on the stack, and handles the formatting of a single
peer in a separate function call.
(closes issue ASTERISK-21466)
Reported by: Guillaume Knispel
patches:
fix_sip_show_peers_stack_overflow_asterisk_11.3.0-v2.patch uploaded by gknispel (License 6492)
........
Merged revisions 387134 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@387135 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Joshua Colp
Matthew Jordan
Mark Michelson
Richard Mudgett
Igor Goncharovskiy
Alec L Davis
Damien Wedhorn
Jason Parker
David M. Lee
Michael L. Young
Jonathan Rose
Sean Bright