The default_from_user retrieval function was pulling the
default_from_user from the global configuration struct in an unsafe way.
If using a database as a backend configuration store, the global
configuration struct is short-lived, so grabbing a pointer from it
results in referencing freed memory.
The fix here is to copy the default_from_user value out of the global
configuration struct.
Thanks go to John Hardin for discovering this problem and proposing the
patch on which this fix is based.
ASTERISK-25390 #close
Reported by Mark Michelson
Change-Id: I6b96067a495c1259da768f4012d44e03e7c6148c
We will only rewrite the Contact header if there is no Record-Route header in
the received request. If a malfunctioning proxy places a Record-Route header
into a REGISTER request, we will decide that we shouldn't update the IP/port
in the Contact header, and we will end up storing a contact with an AoR that
contains the NAT'd IP address.
While it is nice to have the proxy *not* send a Record-Route in a REGISTER
request, it's also a good idea to not process the header in a non-dialog
message. This patch updates the code to explicitly ignore the Record-Route
header in REGISTER requests.
ASTERISK-25387 #close
Change-Id: I4bd3bcccc4003d460cc354d986b0dea2e433ef3f
Make certain that the pjsip session has not failed to
allocate the format capabilities structure, which can
otherwise cause a crash when referenced.
ASTERISK-25323
Change-Id: I602790ba12714741165e441cc64a3ecde4cb5750
In working through a recent ICE negotiation bug, I found the debug
logging in res_rtp_asterisk to be lacking. This patch adds a number of
debug and warning statements that were helpful.
Change-Id: I950c6d8f13a41f14b3d6334b4cafe7d4e997be80
In the wild it is possible for Contact URIs to be quite long as
parameters can exist on them. This can present a problem when storing
them in the AstDB as the URI is used as part of the object name and
there is a fixed length limit for the AstDB. This will cause
the contact to not get stored.
This change uses the MD5 hash of the Contact URI as part of the
object name instead. This has a fixed length which is guaranteed
to not exceed the AstDB length limit.
ASTERISK-25295 #close
Change-Id: Ie8252a75331ca00b41b9f308f42cc1fbdf701a02
When an AoR is deleted by an external mechanism, such as through ARI, we
currently do not remove dynamic contacts that were created for that AoR as a
result of a received REGISTER request. As a result, re-creating the AoR will
cause the dynamic contact to be interpreted as a persistent contact, leading
to some rather strange state being created for the contacts/endpoints.
This patch adds a sorcery observer for the 'aor' object. When a delete is
issued on the underlying sorcery object, the observer is called, and all
contacts created and persisted in sorcery for that AoR are also removed. Note
that we don't want to perform this action when an AO2 object that is an AoR is
destroyed, as the AoR can still exist in the backing storage (and we would
thus be removing valid contacts from an AoR that still "exists".)
ASTERISK-25381 #close
Change-Id: I6697e51ef6b2858b5d63401f35dc378bb0f90328
We were passing the wrong count into pj_ice_sess_create_check_list(),
causing the create to fail if we ever received more than PJ_ICE_MAX_CAND
candidates.
Change-Id: I0303d8e1ecb20a8de9fe629a3209d216c4028378
When Asterisk sends an outbound SIP request, if there is no direct
reason to place a specific value for the username in the From header,
Asterisk would generate a UUID. For example, this would happen when
sending outbound OPTIONS requests when qualifying or when sending
outbound INVITE requests when originating (if no explicit caller ID were
provided). The issue is that some SIP providers reject these sorts of
requests with a "Name too long" error response.
This patch aims to fix this by changing the default outbound username in
From headers to "asterisk". This value can be overridden by changing the
default_from_user option in the global options if desired.
ASTERISK-25377 #close
Reported by Mark Michelson
Change-Id: I6a4d34a56ff73ff4f661b0075aeba5461b7f3190
In Asterisk 11, the announcer channel would receive channel variables
from the channel being parked by means of normal channel inheritance.
This functionality was lost during the big res_parking project in
Asterisk 12. This patch restores that functionality.
ASTERISK-25369 #close
Review: https://gerrit.asterisk.org/#/c/1180/
Change-Id: Ie47e618330114ad2ea91e2edcef1cb6f341eed6e
Pjsip is refusing to use unsecure transport with "sips" in url.
WSS should be considered as secure transport.
ASTERISK-24602 #comment Partially fixed by setting WSS as secure
Change-Id: Iddac406c6deba6240c41a603b8859dfefe1a5353
When sending a stateful response, creation of the transaction can fail,
most commonly because we are trying to create a transaction from a
retransmitted request. When creation of the transaction fails, we end up
leaking a reference to a contact that was bumped when the response was
created.
This patch adds the missing deref and fixes the reference leak.
Change-Id: I2f97ad512aeb1b17e87ca29ae0abacb4d6395f07
A recent change to res_pjsip_pubsub switched to using pjsip_msg_print as
a means of writing an appropriate packet to persistent storage. While
this partially solved the issue, it had its own problems.
pjsip_msg_print will always add a Content-Length header to the message
it prints. Frequent restarts of Asterisk can result in persistent
subscriptions being written with five or more Content-Length headers. In
addition, sometimes some apparent corruption of individual headers could
be seen.
This aims to fix the problem by not running a parsed message through an
interpreter but rather by taking the raw message and saving it. The
logic for what to save is going to be different depending on whether a
SUBSCRIBE was received from the wire or if it was pulled from
persistence. When receiving a packet from the wire, when using a
streaming transport, the rdata->pkt_info.packet may contain multiple SIP
messages or fragments. However, the rdata->msg_info.msg_buf will always
contain the current SIP message to be processed. When pulling from
persistence, though, the rdata->msg_info.msg_buf will be NULL since no
transport actually handled the packet. However, since we know that we
will always ever pull one SIP message from persistence, we are free to
save directly from rdata->pkt_info.packet instead.
ASTERISK-25365 #close
Reported by Mark Michelson
Change-Id: I33153b10d0b4dc8e3801aaaee2f48173b867855b
The keepalive support in res_pjsip_sdp_rtp currently assumes
that a stream will only be negotiated once. This is false.
If the stream is replaced and later added back it can be
negotiated again causing multiple keepalive scheduled items
to exist. This change explicitly deletes the existing
keepalive scheduled item before adding the new one.
The res_pjsip_sdp_rtp module also does not stop RTP
keepalives or timeout timer if the stream has been
replaced. This change adds a callback to the session media
interface to allow a media stream to be stopped without
the resources being destroyed. This allows the scheduled
items and RTP to be stopped when the stream no longer
exists.
ASTERISK-25356 #close
Change-Id: Ibe6a7cc0927c87326fd5f1c0d4ad889dbfbea1de
When a BYE request is received the PJSIP invite session implementation
creates and sends a 200 OK response before we are aware of it. This
causes the INVITE session state callback to be called into and ultimately
the session supplements run on the BYE request. Once this response has
been sent the normal transaction state callback is invoked which
invokes the session supplements on the BYE request again. This can
be problematic in particular with res_pjsip_rfc3326 as it may
attempt to update the hangup cause code on the channel while it is
in the process of being hung up.
This change makes it so the session supplements are only invoked
once by the INVITE session state callback.
ASTERISK-25318 #close
Change-Id: I69c17df55ccbb61ef779ac38cc8c6b411376c19a
If the ast_strndup() call fails to allocate a copy of the
transport string for parsing, fail gracefully.
ASTERISK-25323
Reported by: Scott Griepentrog
Change-Id: Ia4b905ce6d03da53fea526224455c1044b1a5a28
Modules commonly used the pj_gethostip function for retrieving the
IP address of the host. This function does not cache the result and may
result in a DNS lookup occurring, or additional work. If the DNS
server is unreachable or network issues arise this can cause the
pj_gethostip function to block for a period of time.
This change adds an ast_sip_get_host_ip and ast_sip_get_host_ip_string
function which does the same thing but caches the host IP address at
module load time. This results in no additional work being done each
time the local host IP address is needed.
ASTERISK-25342 #close
Change-Id: I3205deb679b01fa5ac05a94b623bfd620a2abe1e
When recreating a subscription it is possible for a freed sub_tree
to be referenced when the initial NOTIFY fails to be created.
Change-Id: I681c215309aad01b21d611c2de47b3b0a6022788
When an endpoint is backed by a non-static conf file backend (such as
the AstDB or Realtime), the 'auth' object may be returned as being an
empty string. Currently, res_pjsip will interpret that as being a valid
auth object, and will attempt to authenticate inbound requests. This
isn't desired; is an auth value is empty (which the name of an auth
object cannot be), we should instead interpret that as being an invalid
auth object and skip it.
ASTERISK-25339 #close
Change-Id: Ic32b0c6eb5575107d5164a8c40099e687cd722c7
There are numerous problems with the current implementation of the RTP
payload type mapping in Asterisk. It uses only one mapping structure to
associate payload types to codecs. The single mapping is overkill if all
of the payload type values are well known values. Dynamic payload type
mappings do not work as well with the single mapping because RFC3264
allows each side of the link to negotiate different dynamic mappings for
what they want to receive. Not only could you have the same codec mapped
for sending and receiving on different payload types you could wind up
with the same payload type mapped to different codecs for each direction.
1) An independent payload type mapping is needed for sending and
receiving.
2) The receive mapping needs to keep track of previous mappings because of
the slack to when negotiation happens and current packets in flight using
the old mapping arrive.
3) The transmit mapping only needs to keep track of the current negotiated
values since we are sending the packets and know when the switchover takes
place.
* Needed to create ast_rtp_codecs_payload_code_tx() and make some callers
use the new function because ast_rtp_codecs_payload_code() was used for
mappings in both directions.
* Needed to create ast_rtp_codecs_payloads_xover() for cases where we need
to pass preferred codec mappings to the peer channel for early media
bridging or when we need to prefer the offered mapping that RFC3264 says
we SHOULD use.
* ast_rtp_codecs_payloads_xover() and ast_rtp_codecs_payload_code_tx() are
the only new public functions created. All the others were only used for
the tx or rx mapping direction so the function doxygen now reflects which
direction the function operates.
* chan_mgcp.c: Removed call to ast_rtp_codecs_payloads_clear() as doing
that makes no sense when processing an incoming SDP. We would be wiping
out any mappings that we set for the possible outgoing SDP we sent
earlier.
ASTERISK-25166
Reported by: Kevin Harwell
ASTERISK-17410
Reported by: Boris Fox
Change-Id: Iaf6c227bca68cb7c414cf2fd4108a8ac98bd45ac
This is a type mismatch fix of the debugging commit
c63316eec1 made to find out why
a testsuite test was failing only on one of the continuous
integration build agents.
Change-Id: Iba34f6e87cec331f6ac80e4daff6476ea6f00a75
When sending an RTP keepalive, we need to be sure we're not dealing with
a NULL RTP instance. There had been a NULL check, but the commit that
added the rtp_timeout and rtp_hold_timeout options removed the NULL
check.
Change-Id: I2d7dcd5022697cfc6bf3d9e19245419078e79b64
Due to the use of ast_websocket_close in session termination it is
possible for the underlying socket to already be closed when the
session is terminated. This occurs when the close frame is attempted
to be written out but fails.
Change-Id: I7572583529a42a7dc911ea77a974d8307d5c0c8b
The res_http_websocket module will currently attempt to close
the WebSocket connection if fatal cases occur, such as when
attempting to write out data and being unable to. When the
fatal cases occur the code attempts to write a WebSocket close
frame out to have the remote side close the connection. If
writing this fails then the connection is not terminated.
This change forcefully terminates the connection if the
WebSocket is to be closed but is unable to send the close frame.
ASTERISK-25312 #close
Change-Id: I10973086671cc192a76424060d9ec8e688602845
This patch adds the .get callback to the format attribute module, such
that the Asterisk core or other third party modules can query for the
negotiated format attributes.
Change-Id: Ia24f55cf9b661d651ce89b4f4b023d921380f19c
If the saved SUBSCRIBE message is not parseable for whatever reason then
Asterisk could crash when libpjsip tries to parse the message and adds an
error message to the parse error list.
* Made ast_sip_create_rdata() initialize the parse error rdata list. The
list is checked after parsing to see that it remains empty for the
function to return successful.
ASTERISK-25306
Reported by Mark Michelson
Change-Id: Ie0677f69f707503b1a37df18723bd59418085256
We don't have a compatability function to fill in a missing htobe64; but
we already have one for the identical htonll.
Change-Id: Ic0a95db1c5b0041e14e6b127432fb533b97e4cac
An http request can be sent to get the existing Asterisk logs.
The command "curl -v -u user:pass -X GET 'http://localhost:8088
/ari/asterisk/logging'" can be run in the terminal to access the
newly implemented functionality.
* Retrieve all existing log channels
ASTERISK-25252
Change-Id: I7bb08b93e3b938c991f3f56cc5d188654768a808
An http request can be sent to create a log channel
in Asterisk.
The command "curl -v -u user:pass -X POST
'http://localhost:088/ari/asterisk/logging/mylog?
configuration=notice,warning'" can be run in the terminal
to access the newly implemented functionality for ARI.
* Ability to create log channels using ARI
ASTERISK-25252
Change-Id: I9a20e5c75716dfbb6b62fd3474faf55be20bd782
An http request can be sent to delete a log channel
in Asterisk.
The command "curl -v -u user:pass -X DELETE 'http://localhost:8088
/ari/asterisk/logging/mylog'" can be run in the terminal
to access the newly implemented functionally for ARI.
* Able to delete log channels using ARI
ASTERISK-25252
Change-Id: Id6eeb54ebcc511595f0418d586ff55914bc3aae6
The pjsip_rx_data structure has a pkt_info.packet field on it that is
the packet that was read from the transport. For datagram transports,
the packet read from the transport will correspond to the SIP message
that arrived. For streamed transports, however, it is possible to read
multiple SIP messages in one packet.
In a recent case, Asterisk crashed on a system where TCP was being used.
This is because at some point, a read from the TCP socket resulted in a
200 OK response as well as an incoming SUBSCRIBE request being stored in
rdata->pkt_info.packet. When the SUBSCRIBE was processed, the
combination 200 OK and SUBSCRIBE was saved in persistent storage. Later,
a restart of Asterisk resulted in the crash because the persistent
subscription recreation code ended up building the 200 OK response
instead of a SUBSCRIBE request, and we attempted to access
request-specific data.
The fix here is to use the pjsip_msg_print() function in order to
persist SUBSCRIBE requests. This way, rather than using the raw socket
data, we use the parsed SIP message that PJSIP has given us. If we
receive multiple SIP messages from a single read, we will be sure only
to save off the relevant SIP message. There also is a safeguard put in
place to make sure that if we do end up reconstructing a SIP response,
it will not cause a crash.
ASTERISK-25306 #close
Reported by Mark Michelson
Change-Id: I4bf16f7b76a2541d10b55de82bcd14c6e542afb2
The ast_sip_sanitize_xml function is used to sanitize
a string for placement into XML. This is done by examining
an input string and then appending values to an output
buffer. The function used by its implementation, strncat,
has specific behavior that was not taken into account.
If the size of the input string exceeded the available
output buffer size it was possible for the sanitization
function to write past the output buffer itself causing
a crash. The crash would either occur because it was
writing into memory it shouldn't be or because the resulting
string was not NULL terminated.
This change keeps count of how much remaining space is
available in the output buffer for text and only allows
strncat to use that amount.
Since this was exposed by the res_pjsip_pidf_digium_body_supplement
module attempting to send a large message the maximum allowed
message size has also been increased in it.
A unit test has also been added which confirms that the
ast_sip_sanitize_xml function is providing NULL terminated
output even when the input length exceeds the output
buffer size.
ASTERISK-25304 #close
Change-Id: I743dd9809d3e13d722df1b0509dfe34621398302
A change recently went in which enabled perfect forward secrecy for
DTLS in res_rtp_asterisk. This was accomplished two different ways
depending on the availability of a feature in OpenSSL. The fallback
method created a temporary instance of a key but did not free it.
This change fixes that.
ASTERISK-25265
Change-Id: Iadc031b67a91410bbefb17ffb4218d615d051396
Commit 39cc28f6ea attempted to fix a
test failure observed on 32 bit test agents by ensuring that a cast from
a 32 bit unsigned integer to a 64 bit unsigned integer was happening in
a predictable place. As it turns out, this did not cause test runs to
succeed.
This commit adds several redundant debug messages that print the payload
lengths of websocket frames. The idea here is that this commit will not
cause tests to succeed for the faulty test agent, but we might deduce
where the fault lies more easily this way by observing at what point the
expected value (537) changes to some ungangly huge number.
If you are wondering why something like this is being committed to the
branch, keep in mind that in commit
39cc28f6ea I noted that the observed test
failures only happen when automated tests are run. Attempts to run the
tests by hand manually on the test agent result in the tests passing.
Change-Id: I14a65c19d8af40dadcdbd52348de3b0016e1ae8d
We have seen a rash of test failures on a 32-bit build agent. Commit
48698a5e21 solved an obvious problem where
we were not encoding a 64-bit value correctly over the wire. This
commit, however, did not solve the test failures.
In the failing tests, ARI is attempting to send a 537 byte text frame
over a websocket. When sending a frame this small, 16 bits are all that
is required in order to encode the payload length on the websocket
frame. However, ast_websocket_write() thinks that the payload length is
greater than 65535 and therefore writes out a 64 bit payload length.
Inspecting this payload length, the lower 32 bits are exactly what we
would expect it to be, 537 in hex. The upper 32 bits, are junk values
that are not expected to be there.
In the failure, we are passing the result of strlen() to a function that
expects a uint64_t parameter to be passed in. strlen() returns a size_t,
which on this 32-bit machine is 32 bits wide. Normally, passing a 32-bit
unsigned value to somewhere where a 64-bit unsigned value is expected
would cause no problems. In fact, in manual runs of failing tests, this
works just fine. However, ast_websocket_write() uses the Asterisk
optional API, which means that rather than a simple function call, there
are a series of macros that are used for its declaration and
implementation. These macros may be causing some sort of error to occur
when converting from a 32 bit quantity to a 64 bit quantity.
This commit changes the logic by making existing ast_websocket_write()
calls use ast_websocket_write_string() instead. Within
ast_websocket_write_string(), the 64-bit converted strlen is saved in a
local variable, and that variable is passed to ast_websocket_write()
instead.
Note that this commit message is full of speculation rather than
certainty. This is because the observed test failures, while always
present in automated test runs, never occur when tests are manually
attempted on the same test agent. The idea behind this commit is to fix
a theoretical issue by performing changes that should, at the least,
cause no harm. If it turns out that this change does not fix the failing
tests, then this commit should be reverted.
Change-Id: I4458dd87d785ca322b89c152b223a540a3d23e67
An http request can be sent to rotate a specified log channel.
If the channel does not exist, an error response will be
returned.
The command "curl -v -u user:pass -X PUT 'http://localhost:8088
/ari/asterisk/logging/logChannelName/rotate'" can be run in the
terminal to access this new functionality.
* Added the ability to rotate log files through ARI
ASTERISK-25252
Change-Id: Iaefa21cbbc1b29effb33004ee3d89c977e76ab01
Prior to ASTERISK-24988, the WebSocket handshake was resolved before Stasis
applications were registered. This was done such that the WebSocket would be
ready when an application is registered. However, by creating the WebSocket
first, the client had the ability to make requests for the Stasis application
it thought had been created with the initial handshake request. The inevitable
conclusion of this scenario was the cart being put before the horse.
ASTERISK-24988 resolved half of the problem by ensuring that the applications
were created and registered with Stasis prior to completing the handshake
with the client. While this meant that Stasis was ready when the client
received the green-light from Asterisk, it also meant that the WebSocket was
not yet ready for Stasis to dispatch messages.
This patch introduces a message queuing mechanism for delaying messages from
Stasis applications while the WebSocket is being constructed. When the ARI
event processor receives the message from the WebSocket that it is being
created, the event processor instantiates an event session which contains a
message queue. It then tries to create and register the requested applications
with Stasis. Messages that are dispatched from Stasis between this point and
the point at which the event processor is notified the WebSocket is ready, are
stashed in the queue. Once the WebSocket has been built, the queue's messages
are dispatched in the order in which they were originally received and the
queue is concurrently cleared.
ASTERISK-25181 #close
Reported By: Matt Jordan
Change-Id: Iafef7b85a2e0bf78c114db4c87ffc3d16d671a17
Two testsuite tests crashed in the same place as a result of an INVITE
being CANCELed.
tests/channels/pjsip/resolver/srv/failover/in_dialog/transport_unspecified
tests/channels/pjsip/resolver/srv/failover/in_dialog/transport_tcp
The session pointer is no longer in the inv->mod_data[session_module.id]
location because the INVITE transaction has reached the terminated state.
ASTERISK-25297 #close
Reported by: Richard Mudgett
Change-Id: Idb75fdca0321f5447d5dac737a632a5f03614427
A test agent was continuously failing all ARI tests when run against
Asterisk 13. As it turns out, the reason for this is that on those test
runs, for some reason we decided to use the super extended 64 bit
payload length for websocket text frames instead of the extended 16 bit
payload length. For 64-bit payloads, the expected byte order over the
network is
7, 6, 5, 4, 3, 2, 1, 0
However, we were sending the payload as
3, 2, 1, 0, 7, 6, 5, 4
This meant that we were saying to expect an absolutely MASSIVE payload
to arrive. Since we did not follow through on this expected payload
size, the client would sit patiently waiting for the rest of the payload
to arrive until the test would time out.
With this change, we use the htobe64() function instead of htonl() so
that a 64-bit byte-swap is performed instead of a 32 bit byte-swap.
Change-Id: Ibcd8552392845fbcdd017a8c8c1043b7fe35964a
This will add ECDH support to Asterisk. It will
detect auto ECDH support in OpenSSL
(1.0.2b and above) during ./configure. If this is
available, it will use it,
otherwise it will fall back to prime256v1 (this
behavior is consistent with
other projects such as Apache and nginx).
This fixes WebRTC being broken in Firefox 38+ due
to Firefox now only supporting
ciphers with perfect forward secrecy.
ASTERISK-25265 #close
Change-Id: I8c13b33a2a79c0bde2e69e4ba6afa5ab9351465b
This change adds support for the 'rtp_timeout' and 'rtp_timeout_hold'
endpoint options. These allow the channel to be hung up if RTP
is not received from the remote endpoint for a specified number of
seconds.
ASTERISK-25259 #close
Change-Id: I3f39daaa7da2596b5022737b77799d16204175b9
This adds an "rtp_keepalive" option for PJSIP endpoints. Similar to the
chan_sip option, this specifies an interval, in seconds, at which we
will send RTP comfort noise frames. This can be useful for keeping RTP
sessions alive as well as keeping NAT associations alive during lulls.
ASTERISK-25242 #close
Reported by Mark Michelson
Change-Id: I3b9903d99e35fe5d0b53ecc46df82c750776bc8d
Misconfiguring sorcery.conf with a 'config' wizard with no extra data
will currently crash Asterisk on startup, as the wizard requires a comma
delineated list to parse. This patch updates res_sorcery_config to check
for the presence of the data before it starts manipulating it.
Change-Id: I4c97512e8258bc82abe190627a9206c28f5d3847
This patch adds support for push configuration of dynamic, i.e.,
sorcery, objects in Asterisk. It adds three new REST API calls to the
'asterisk' resource:
* GET /asterisk/{configClass}/{objectType}/{id}: retrieve the current
object given its ID. This returns back a list of ConfigTuples, which
define the fields and their present values that make up the object.
* PUT /asterisk/{configClass}/{objectType}/{id}: create or update an
object. A body may be passed with the request that contains fields to
populate in the object. The same format as what is retrieved using
the GET operation is used for the body, save that we specify that the
list of fields to update are contained in the "fields" attribute.
* DELETE /asterisk/{configClass}/{objectType}/{id}: remove a dynamic
object from its backing storage.
Note that the success/failure of these operations is somewhat
configuration dependent, i.e., you must be using a sorcery wizard that
supports the operation in question. If a sorcery wizard does not support
the create or delete mechanisms, then the REST API call will fail with a
403 forbidden.
ASTERISK-25238 #close
Change-Id: I28cd5c7bf6f67f8e9e437ff097f8fd171d30ff5c
setup_park_common_datastore() was assuming that a non-NULL string returned
for the ATTENDEDTRANSFER and BLINDTRANSFER channel variables are not empty
strings. Things got crashy as a result.
* Made setup_park_common_datastore() treat the channel variable values the
same whether they are NULL or empty for ATTENDEDTRANSFER and
BLINDTRANSFER.
ASTERISK-25254 #close
Reported by: Richard Mudgett
Change-Id: I9a9c174b33f354f35f82cc6b7cea8303adbaf9c2
Changed the unload mode to AST_FORCE_SOFT from AST_FORCE_FIRM,
which would unload a module even if it was in use.
* Changed unload mode to proper mode
ASTERISK-25173
Change-Id: If2402487b5bce05d9770f25f65f5c8e292ad5533
The crash fix for ASTERISK-25183 backported some code from master to try
to make sure that a BYE response is processed by the same serializer used
by the BYE request. The identified race condition causing that backport
was the BYE request code had not finished processing after sending the BYE
before the BYE response came in for processing under a different thread.
Unfortunately, there is still a race condition. Now the race condition is
between destroying the call session's serializer in
ast_taskprocessor_unreference() and using ast_taskprocessor_get() to get a
reference to the serializer for a BYE response. Even worse, the new race
condition is a design limitation of the taskprocessor implementation that
didn't matter in versions before v12. Back then, taskprocessors were only
destroyed when a module unloaded. Now res_pjsip can destroy them when a
call ends.
However, as noted on the ASTERISK-25183 commit,
session_inv_on_state_changed() is disassociating the dialog from the
session when the invite dialog state becomes PJSIP_INV_STATE_DISCONNECTED.
This is a tad too soon because our BYE request transaction has not
completed yet.
* Split session_end() that is called by session_inv_on_state_changed() to
hold off session destruction until the BYE transaction timeout occurs or a
failed initial INVITE transaction timeout occurs in
session_inv_on_tsx_state_changed().
ASTERISK-25201 #close
Reported by: Matt Jordan
Change-Id: Iaf8dc8485fd8392a2a3ee4ad3b7f7f04a0dcc961
An http request can be sent to reload an Asterisk module. If the
module can not be reloaded or is not already loaded, an error
response will be returned.
The command "curl -v -u user:pass -X PUT 'http://localhost:8088
/ari/asterisk/modules/{moduleName}'" (or something similar, based
on configuration) can be run in the terminal to access this new
functionality.
For more information, see:
https://wiki.asterisk.org/wiki.display/~bford/Asterisk+ARI+Resource
* Added new ARI functionality
* Asterisk modules can be reloaded through http requests
ASTERISK-25173
Change-Id: I289188bcae182b2083bdbd9ebfffd50b62f58ae1
An http request can be sent to unload an Asterisk module. If the
module can not be unloaded or is already unloaded, an error response
will be returned.
The command "curl -v -u user:pass -X DELETE 'http://localhost:8088
/ari/asterisk/modules/{moduleName}'" (or something similar, depending
on configuration) can be run in the terminal to access this new
functionality.
For more information, see:
https://wiki.asterisk.org/wiki.display/~bford/Asterisk+ARI+Resource
* Added new ARI functionality
* Asterisk modules can be unloaded through http requests
ASTERISK-25173
Change-Id: I535a95f5676deb02651522761ecbdc0b00b5ac57
An http request can be sent to load an Asterisk module. If the
module can not be loaded or is loaded already, an error response
will be returned.
The command curl -v -u user:pass -X POST 'http://localhost:8088/ari
/asterisk/modules/{moduleName}'" (or something similar, depending on
configuration) can be run in the terminal to access this new
functionality.
For more information, see:
https://wiki.asterisk.org/wiki.display/~bford/Asterisk+ARI+Resource
* Added new ARI functionality
* Asterisk modules can be loaded through http requests
ASTERISK-25173
Change-Id: I9e05d5b8c5c666ecfef341504f9edc1aa84fda33
An http request can be sent to retrieve information on a single
module, including the resource name, description, use count, status,
and support level.
The command "curl -v -u user:pass -X GET 'http://localhost:8088/ari
/asterisk/modules/{moduleName}'" (or something similar, depending on
configuration) can be run in the terminal to access this new
functionality.
For more information, see:
https://wiki.asterisk.org/wiki.display/~bford/Asterisk+ARI+Resource
* Added new ARI functionality
* Information on a single module can now be retrieved
ASTERISK-25173
Change-Id: Ibce5a94e70ecdf4e90329cf0ba66c33a62d37463
Having a debug message tell us that we attempted to look up an item but
failed is nice in circumstances when it isn't clear if the wizard was
queried correctly or not.
Change-Id: I2600c3bbea87f252196358f62e73f4c7da8632f7
This patch fixes some bad default value handling in the following
settings:
* The 'message_context' and 'accountcode' settings are not mandatory. As
such, we can allow their stringfield values to be empty.
* The 'media_encryption' setting applies a default value of 'none' to
the setting, which it then can't parse or understand. Since the value
is documented to be 'no', this will now apply that as the default
value.
Change-Id: Ib9be7f97a7a5b9bc7aee868edf5acf38774cff83
An http request can be sent to retrieve a list of all existing modules,
including the resource name, description, use count, status, and
support level.
The command "curl -v -u user:pass -X GET 'http://localhost:8088/ari/
asterisk/modules" (or something similar, depending on configuration)
can be run in the terminal to access this new functionality.
For more information, see:
https://wiki.asterisk.org/wiki.display/~bford/Asterisk+ARI+Resource
* Added new ARI functionality
* Information on modules can now be retrieved
Change-Id: I63cbbf0ec0c3544cc45ed2a588dceabe91c5e0b0
This change fixes a bug where the DTLS timeout timer would be
initialized to 0 if DTLS was not used for an RTP session.
ASTERISK-25103
Change-Id: If8d26bb054f1d300838850da5b8db9044c2fe2ac
This change moves logic for setting up the DTLS SSL contexts to
when the SDP is done being processed instead of when ICE negotiation
completes. It also stops handshakes from being initiated when we
are acting as a server.
Manipulating the SSL context when ICE negotiation has completed
is problematic as the SSL context is not protected and if acting
as a client the remote side may have started DTLS negotiation
already.
The retransmission timeout timer code has also been split up
and simplified some. Both RTP and RTCP now have their own timers
and the points at which the timer is stopped and started is now
more specific. When a packet is sent the timer is started. When
a response is received but before it is processed the timer is
stopped. This provides a guarantee that the timeout is not
occurring while the response is processed.
ASTERISK-22805 #close
ASTERISK-24550 #close
ASTERISK-24651 #close
ASTERISK-24832 #close
ASTERISK-25103 #close
ASTERISK-25127 #close
Change-Id: Ib75ea2546f29d6efc3d2d37c58df6986c7bd9b91
MWI subscriptions can crash or corrupt memory when using the subscription
datastore to access the MWI subscription object because the datastore is
not holding a reference to the object.
* Give the subscription datastore a ref to the MWI subscription object.
It is unfortunate that the ref causes a circular ref chain that must be
explicitly broken to allow the memory to get released. The loop is broken
when the subscription is shutdown and if the subscription setup fails.
ASTERISK-25168 #close
Reported by: Carl Fortin
Change-Id: Ice4fa823f138ff10a6c74d280699c41a82836d4f
When res_pjsip body generator modules were generating XML or XPIDF
response bodies, there was a chance that the generated body would be the
exact size of the supplied buffer. Adding the nul string terminator would
then write beyond the end of the buffer and potentially corrupt memory.
* Fix MALLOC_DEBUG high fence violations caused by adding a nul string
terminator on the end of a buffer for XML or XPIDF response bodies.
* Made calls to pj_xml_print() safer if the XML prolog is requested. Due
to a bug in pjproject, the return value could be -1 _or_
AST_PJSIP_XML_PROLOG_LEN if the supplied buffer is not large enough.
* Updated the doxygen comment of AST_PJSIP_XML_PROLOG_LEN to describe the
return value of pj_xml_print() when the supplied buffer is not large
enough.
ASTERISK-25168
Reported by: Carl Fortin
Change-Id: Id70e1d373a6a2b2bd9e678b5cbc5e55b308981de
When a caller calls a FAX number and then hangs up right after the call is
answered then the T.38 re-INVITE automatic reject timer may still be
running after the channel goes away.
* Added session NULL channel checks on the code paths that get executed by
t38_automatic_reject() to prevent a crash when the T.38 re-INVITE
automatic reject timer expires.
ASTERISK-25168
Reported by: Carl Fortin
Change-Id: I07b6cd23815aedce5044f8f32543779e2f7a2403
Calling t38_change_state() sets the t38 state so it makes little sense to
then check the state right after the call for something else.
* Made the code in t38_interpret_parameters() reject or exit T.38 mode as
intended but not implemented.
Change-Id: Ib281263a6ed44da9448132c4e6df1e183b8a3df2
Previously Asterisk did not properly failover to the next resolved DNS
address when a endpoint could not be reached. With this patch, and while
using res_pjsip, SIP requests (both in/out of dialog) now attempt to use
the next address in the list of resolved addresses until a proper response
is received or no more addresses are left.
ASTERISK-25076 #close
Reported by: Joshua Colp
Change-Id: Ief14f4ebd82474881f72f4538f4577f30af2a764
In Jenkins there is currently a sporadic test failure of a
variable number of sorcery memory cache unit tests. I have not
been able to reproduce this on the build agents themselves or
on my development machine.
My working theory is that the stale unit test is causing a
sorcery instance to persist longer than expected, causing subsequent
tests to fail when setting up and initializing the next
sorcery instance.
To see if this is the case this change moves the stale unit test
to execute last so no subsequent unit tests can have issues
initializing their sorcery instance.
Change-Id: Ifd6550a949613be774b75fa5db12c02110f82c4a
This change makes it so that when accepting a WebSocket
connection the HTTP response is sent as one packet instead of
fragmented. Browsers don't like it when you send it fragmented.
ASTERISK-25103
Change-Id: I9b82c4ec2949b0bce692ad0bf6f7cea9709e7f69
This fixes so a failure to get a timer file descriptor does not cascade
to closing FD 0.
On error, both res_timing_kqueue and res_timing_timerfd would call the
destructor before setting the file handle. The file handle had been
initialized to 0, causing FD 0 to be closed. This in turn, resulted in
floods of "CLI>" messages and an unusable terminal.
ASTERISK-19277 #close
Reported by: Barry Chern
For the master branch, this was already fixed. This patch only ensures
that we do not attempt to close a negative file descriptor.
Change-Id: I147d7e33726c6e5a2751928d56561494f5800350
This prevents a leak of a sorcery object type when realtime sorcery
objects are retrieved by fields or when multiple objects are retrieved.
The extent of this leak is that sorcery object types would be leaked.
These are allocated whenever an object type is registered with sorcery,
meaning that on module shutdown, these objects would be leaked. This
could be problematic if many reloads were performed, but it is not as
severe as if every sorcery object retrieved from realtime were being
leaked.
ASTERISK-25165 #close
Reported by Corey Farrell
Change-Id: I625c3b50eee4576670b7eeb013c81ad043b4b4f8
Returns a 'failure' from the module load routine indicates to Asterisk
that it should abort loading completely. This is rarely - in fact,
really, never - a good option. Aborting load of Asterisk from a dynamic
module implies that the core, and the rest of the dynamic modules, don't
matter: we should abandon all processing.
res_corosync is really not that important.
This patch updates the module such that, if it fails to load, it
politely declines (emitting ERROR messages along the way), and allows
Asterisk to continue to function.
Note that this issue was keeping Asterisk unit tests from running on
certain build agents.
Change-Id: I252249e81fb9b1a68e0da873f54f47e21d648f0f
A previous change made the contact only get rewritten if the dialog's
route set was not marked frozen. Unfortunately, while the intent of this
is correct, the dialog's route set actually gets marked as frozen
earlier than expected, especially for UAS dialogs.
Instead, the idea is that the contact needs to not be rewritten if there
is a pre-existing route set on the dialog. This is now accomplished by
checking the dialog's route set list instead of checking if the route
set is frozen.
Doing this causes some broken tests to begin passing again.
ASTERISK-25196
Reported by Mark Michelson
Change-Id: I525ab251fd40a52ede327a52a2810a56deb0529e
The client_state objects contain a serializer used to send the outbound
REGISTER messages. Once all those message transactions are complete then
the module can shutdown.
ASTERISK-24907 #close
Reported by: Kevin Harwell
Change-Id: Ibb2fe558f98190f2a06da830e0fadfa25516f547
res_pjsip_refer will attempt to add Referred-By or Replaces headers to
outbound INVITEs at times. If the INVITE gets challenged for
authentication, then we will resend the INVITE. Prior to this patch, the
Referred-By or Replaces header would be re-added to the outbound INVITE,
resulting in duplicated headers.
ASTERISK-25204 #close
Reported by Mark Michelson
Change-Id: I59fb5c08b4d253c0dba9ee3d3950b5025358222d
When performing some provider testing, the rewrite_contact option was
interfering with proper construction of a route set when sending an ACK
after receiving a 200 OK response to an INVITE.
The initial INVITE was sent to address sip:foo. The 200 OK had a Contact
header with URI sip:bar. In addition, the 200 OK had Record-Route
headers for sip:baz and sip:foo, in that order. Since the Record-Route
headers had the lr parameter, the result should have been:
* Set R-URI of the ACK to sip:bar.
* Add Route headers for sip:foo and sip:baz, in that order.
However, the rewrite_contact option resulted in our rewriting the
Contact header on the 200 OK to sip:foo. The result was:
* R-URI remained sip:foo.
* We added Route headers for sip:foo and sip:baz, in that order.
The result was that sip:bar was not indicated in the ACK at all, so the
far end never received our ACK. The call eventually dropped.
The intention of rewrite_contact is to rewrite the most immediate
destination of our SIP request to be the same address on which we
received a request or response. In the case of processing a SIP response
with Record-Route headers, this means that instead of rewriting the
Contact header, we should instead rewrite the bottom-most Record-Route
header. In the case of processing a SIP request with Record-Route
headers, this means we rewrite the top-most Record-route header.
Like when we rewrite the Contact header, we also ensure to update
the dialog's route set if it exists.
ASTERISK-25196 #close
Reported by Mark Michelson
Change-Id: I9702157c3603a2d0bd8a8215ac27564d366b666f
A module trying to unload needs to wait for all serializers it creates and
uses to complete processing before unloading.
ASTERISK-24907
Reported by: Kevin Harwell
Change-Id: I8c80b90f2f82754e8dbb02ddf3c9121e5e966059
* handle_client_state_destruction() must always be passed a ref to
client_state because it will always unref client_state.
handle_registration_response() was not passing a client_state ref.
* Made the final un-REGISTER message get sent normally using the pjproject
register control structure in handle_client_state_destruction(). The
previous code attempted to short circuit the response handling for the
module to unload. That doesn't work for a couple reasons. One,
pjsip_regc_send() may call the registered callback before it returns and
unbalance the client_state ref count. Two, the registered callback
handles any authentication for the un-REGISTER message.
* Made the distinction between internal registration state and external
registration status with sip_outbound_registration_status_str(). This is
necessary to avoid altering documented AMI messages with internal
changes.
* Removed references to client_state->client outside of the serializer
thread. When handle_client_state_destruction() destroys the pjproject
register control structure that memory is freed and cannot be referenced
anymore. These accesses were to provide information for debug and
off-nominal warning messages.
* In sip_outbound_registration_timer_cb() you should not access entry->id
after unrefing client_state because the passed in entry is normally
pointing to the timer entry in the client_state object.
ASTERISK-24907
Reported by: Kevin Harwell
Change-Id: Ia7b446d8644b6b4550ef5bea49527671de65183f
The sorcery pjsip 'registration' config object needs to be destroyed on
module unload. Otherwise, a reload of res_pjsip could try to use
callbacks for a previously unloaded instance of the module provided by
ast_sorcery_object_register() or one of the variants. Also, if
res_pjsip_outbound_registration were subsequently reloaded, the sorcery
config field objects would be registered in sorcery twice.
ASTERISK-24907
Reported by: Kevin Harwell
Change-Id: I304fad13dece2604af48353f6c6d9d5c7b064697
It is best if the loading code creates and initializes the module's
infrastructure before letting the system know of its existence. The
unloading code needs to reverse the actions of the loading code and in the
reverse order.
ASTERISK-24907
Reported by: Kevin Harwell
Change-Id: I5d151383e9787b5b60aa5e1627b10f040acdded4
Analyzing the code shows that the unit test summary and description
strings should not end with a new-line character. Where these strings are
used in the code a new-line is provided for output.
Change-Id: I2f4f37988ec363c8d1c5077a2fc8ca841c5cd30c
The res_pjsip_mwi previously required a reload to set up the proper
subscriptions to allow unsolicited MWI to work. This change
makes it so the act of registering will also cause this to occur.
This is particularly useful if realtime is involved as no reload
needs to occur within Asterisk to cause the MWI information
to get sent.
ASTERISK-25180 #close
Change-Id: Id847b47de4b8b3ab8858455ccc2f07b0f915f252
This resolves two observed race conditions.
First, a bit of background on what the Stasis application does:
1a Creates a stasis_app_control structure. This structure is linked into
a global container and can be looked up using a channel's unique ID.
2a Puts the channel in an event loop. The event loop can exit either
because the stasis_app_control structure has been marked done, or
because of some other factor, such as a hangup. In the event loop, the
stasis_app_control determines if any specific ARI commands need to be
run on the channel and will run them from this thread.
3a Checks if the channel is bridged. If the channel is bridged, then
ast_bridge_depart() is called since channels that are added to Stasis
bridges are always imparted as departable.
4a Unlink the stasis_app_control from the container.
When an ARI command is received by Asterisk, the following occurs
1b A thread is spawned to handle the HTTP request
2b The stasis_app_control(s) that corresponds to the channel(s) in the
request is/are retrieved. If the stasis_app_control cannot be
retrieved, then it is assumed that the channel in question has exited
the Stasis app or perhaps was never in Stasis in the first place.
3b A command is queued onto the stasis_app_control, and the channel's
event loop thread is signaled to run the command.
4b While most ARI commands do nothing further, some, such as adding or
removing channels from a bridge, will block until the command they
issued has been completed by the channel's event loop.
The first race condition that is solved by this patch involves a crash
that can occur due to faulty detection of the channel's bridged status
in step 3a. What can happen is that in step 2a, the event loop may run
the ast_bridge_impart() function to asynchronously place the channel
into a bridge, then immediately exit the event loop because the channel
has hung up. In step 3a, we would detect that the channel was not
bridged and would not call ast_bridge_depart(). The reason that the
channel did not appear to be bridged was that the depart_thread that is
spawned by ast_bridge_impart() had not yet started. That is the thread
where the channel is marked as being bridged. Since we did not call
ast_bridge_depart(), the Stasis application would exit, and then the
channel would be destroyed Then the depart_thread would start up and
try to manipulate the destroyed channel, causing a crash.
The fix for this is to switch from using ast_channel_is_bridged() to
checking the NULLity of ast_channel_internal_bridge_channel() to
determine if ast_bridge_depart() needs to be called. The channel's
internal bridge_channel is set when ast_bridge_impart() is called and
is NULLed by the call to ast_bridge_depart(). If the channel's internal
bridge_channel is non-NULL, then the channel must have been imparted
into the bridge and needs to be departed, even if the actual bridging
operation has not yet started. By departing the channel when necessary,
the thread that is running the Stasis application will block until the
bridge gives the okay that the depart_thread has exited.
The second race condition that is solved by this patch involves a leak
of HTTP handler threads. The problem was that step 2b would successfully
retrieve a stasis_app_control structure. Then step 2a would exit the
channel from the event loop due to a hangup. Steps 3a and 4a would
execute, and then finally steps 3b and 4b would. The problem is that at
step 4b, when attempting to add a channel to a bridge, the thread would
block forever since the channel would never execute the queued command
since it was finished with the event loop. This meant that the HTTP
handling thread would be leaked, along with any references that thread
may have owned (in my case, I was seeing bridges leaked).
The fix for this is to hone in better on when the channel has exited the
event loop. The stasis_app_control structure has an is_done field that
is now set at each point where the channel may exit the event loop. If
step 2b retrieves a valid stasis_app_control structure but the control
is marked as done, then the attempted operation exits immediately since
there will be nothing to service the attempted command.
ASTERISK-25091 #close
Reported by Ilya Trikoz
Change-Id: If66265b73b4c9f8f58599124d777fedc54576628
To prevent confusion I am removing the prefetch option until such
time as it is implemented. All other functionality, however, has
been implemented.
ASTERISK-25067
Change-Id: I9ce6aa3e5c6c5bc3c5baa8ff90fa036d73939895
This event was added some time ago in order to clarify when a channel
took the place of another channel in a parking lot. However, there was
no XML documentation added for the event. This patch adds the XML
documentation.
ASTERISK-24900 #close
Reported by Rusty Newton
Change-Id: I4cfe7777c4b94bbff91c9221c6096a7a02a92eac
Some phones send g.726 audio packed for AAL2, which differs from what is
recommended by RFC 3351. If Asterisk receives audio formatted as such when
negotiating g.726 then it sounds a bit distorted. Added an option to
res_pjsip_endpoint that allows g.726 negotiated audio to be treated as g.726
AAL2 packed.
ASTERISK-25158 #close
Reported by: Steve Pitts
Change-Id: Ie7e21f75493d7fe53e75e12c971e72f5afa33615
All send/receive processing for a SIP transaction needs to be done under
the same threadpool serializer to prevent reentrancy problems inside
pjproject when using an external DNS resolver to process messages for the
transaction.
* Add threadpool API call to get the current serializer associated with
the worker thread.
* Pick a serializer from a pool of default serializers if the caller of
res_pjsip.c:ast_sip_push_task() does not provide one.
This is a simple way to ensure that all outgoing SIP request messages are
processed under a serializer. Otherwise, any place where a pushed task is
done that would result in an outgoing out-of-dialog request would need to
be modified to supply a serializer. Serializers from the default
serializer pool are picked in a round robin sequence for simplicity.
A side effect is that the default serializer pool will limit the growth of
the thread pool from random tasks. This is not necessarily a bad thing.
* Made pjsip_resolver.c use the requesting thread's serializer to execute
the async callback.
* Made pjsip_distributor.c save the thread's serializer name on the
outgoing request tdata struct so the response can be processed under the
same serializer.
ASTERISK-25115 #close
Reported by: John Bigelow
Change-Id: Iea71c16ce1132017b5791635e198b8c27973f40a
* Fix query_set destruction before we are done kicking the queries off.
* Fixed no queries requested handling.
* Add empty queries request unit test.
* Added missing allocation check in ast_dns_query_set_add().
* Made initial pjsip resolving query vector slightly larger.
ASTERISK-25115
Reported by: John Bigelow
Change-Id: Ie8be8347d0992e93946d72b6e7b1299727b038f2
This patch fixes use-after-free bugs caught by AddressSanitizer.
1. PJSIP transport manager may decide to destroy transport on its own.
For example, when the contact registered via websocket has not renewed
its registration in time. The transport was destoyed, but the websocket
listener thread was still active until the socket closes, and then tried
to call transport_shutdown on transport that has been freed.
Also, the transport destructor accessed wstransport->rdata.tp_info.pool
right after freeing memory that contained wstransport itself.
This patch converts transport to an ao2 object, allowing it to be
refcounted, so that it is available until both websocket listener and
pjsip transport manager are finished with it.
2. The websocket listener deletes the last reference on websocket session
when the tcp connection is closed, and it gets destroyed, but
the transport manager may still use it, for example when disconnect
happens in the middle of a SIP transaction.
A new reference to websocket session has been added that is released
with the transport to prevent this.
ASTERISK-25096 #close
Reported by: Josh Kitchens
ASTERISK-24963 #close
Reported by: Badalian Vyacheslav
Change-Id: Idc0b63eb6e459c1ddfb2430127d34b3c4d8d373b
* Add some type casting so tv_usec can really be a long, instead of
some strange platform specific type.
* Add some .dylib style files to .gitignore.
* Switch from using -Xlinker to -Wl,. For [reasons unknown][], newer
versions of GCC, when compiling the Homebrew formula for Asterisk,
are not properly passing the -Xlinker options to the linker. Given
that -Wl, does exactly the [same thing][], and does it properly, this
patch changes the -Xlinker options to use -Wl, instead.
[reasons unknown]: http://bit.ly/1SUbEYx
[same thing]: https://gcc.gnu.org/onlinedocs/gcc/Link-Options.html
Change-Id: Id5e6b3c6cc86282ea5fca630dc3991137c5bf4dd
This change implements the expire_on_reload option for memory caches.
If enabled and a reload is performed all objects within the cache
will be expired and the cache emptied.
ASTERISK-25067
Reported by: Matt Jordan
Change-Id: Id46aa1957d660556700e689e195eed57c989b85e
This change adds a CLI command which can perform memory cache thrashing as well
as unit tests which perform thrashing under the following configurations:
1. Low number of unique objects that go stale after 1 second
2. Low number of unique objects that expire after 1 second
3. Low number of unique objects which are constantly updated
4. Large number of unique objects which exceed a defined cache size
5. Large number of unique objects which exceed a defined cache size
that also expire and go stale rapidly
6. Large number of unique objects which expire and go stale rapidly
7. Large number of unique objects
For all of the above there are a large number of threads constantly
attempting to retrieve random objects and each test runs for a few
seconds.
ASTERISK-25067
Reported by: Matt Jordan
Change-Id: I8c8ceff977332c80ed4a31f10d694d48552b2f78
This change adds a testsuite event for when a refresh occurs.
This is useful as it provides a guaranteed mechanism of knowing when
it has occurred instead of waiting an arbitrary amount of time.
ASTERISK-25067
Reported by: Matt Jordan
Change-Id: Iaa6b8d2d6bab7f99ee08e1c8908b8272a8987e65
It is possible to receive incoming requests or responses after the channel
on an ast_sip_session has been destroyed and NULLed out. Handlers of these
sorts of requests or responses need to be prepared for the possibility
that the channel is NULL or else they could cause a crash.
While several places have been amended to deal with NULL channels, there
were still a couple of places that needed updating.
res_pjsip_dtmf_info.c: When handling incoming INFO requests, we need to
return early if there is no channel on the session.
res_pjsip_session.c: When handling a 302 response, we need to stop the
redirecting attempt if there is no channel on the session.
ASTERISK-25148 #close
reported by Mark Michelson
Change-Id: Id1a75ffc3d0eaa168b0b28188fb54d6cf9fc47a9
contact_apply_handler calls ast_res_pjsip_find_or_create_contact_status
to force the creation of a contact_status object whenever a new
contact is added but it didn't unref the returned object.
Added an ao2_cleanup(status) to plug the leak.
ASTERISK-25141
Change-Id: Icc1401cae142855a1abc86ab5179dfb3ee861c40
Reported-by: Corey Farrell
app_control_register_rule and app_control_unregister_rule lock/unlock
the queue, which is a mutating operation according to the
ao2_lock/_unlock prototype. Depending on the specific (implicit) casts
in SCOPED_LOCK and RAII_VAR, the compiler may warn or not. As the only
callers of those functions do not have the const, get consistent results
by just dropping it.
Change-Id: Ib9e6296155a39bc5d627142a3828180c3cfe8fbb
When the remote peer requires authentication for in-dialog requests then
re-INVITEs to the peer cause the call to be disconnected and other
in-dialog requests to the peer like MESSAGE just don't go through.
* Made session_inv_on_tsx_state_changed() handle in-dialog authentication
for re-INVITEs and other methods. Initial INVITEs cannot be handled here
because the INVITE transaction must be restarted earlier.
* Pulled needed code from res/res_pjsip/pjsip_outbound_auth.c in
preparation for removing the file. The generic outbound authentication
code did not work as well as anticipated.
* Created outbound_invite_auth() to only handle initial outbound INVITEs.
Re-INVITEs cannot be handled here. The re-INVITE transaction is still in
progress and the PJSIP library cannot handle the overlapping INVITE
transactions. Other method types should not be handled here as this code
only works on outgoing calls and we need to handle incoming and outgoing
calls.
ASTERISK-25131 #close
Reported by: Richard Mudgett
Change-Id: I12bdd7ddccc819b4ce4b091e826d1e26334601b0
The loop to find the first available contact of an endpoint grabbed
contact from the iterator, then checked for offline state. This
caused the first contact after the state was found to leak a reference.
ASTERISK-25141
Change-Id: Id0f1d87410fc63742db0594eb4b18b36e99aec08
When permanent_uri_handler was creating the contact status
object for each contact, it wasn't unreffing it at the
end of the loop.
ASTERISK-25141 #close
Reported-by: Corey Farrell
Change-Id: I7bb127994677bb3d459f87952f8425c9b9967b12
This change adds the following CLI commands and AMI actions:
sorcery memory cache show
sorcery memory cache dump
sorcery memory cache expire
sorcery memory cache stale
SorceryMemoryCacheExpire
SorceryMemoryCacheExpireObject
SorceryMemoryCacheStale
SorceryMemoryCacheStaleObject
These allow both examination and manipulation of sorcery memory
caches from external sources.
Cached objects can be explicitly expired from a cache or marked
as stale. If expired they are immediately removed. If marked as
stale they will be background refreshed when next retrieved.
ASTERISK-25067
Reported by Matt Jordan
Change-Id: I68e03cfd8c34b5e07f4b6ee4fd93a3f4a00a3d9e
This change introduces a check of object_lifetime_stale when retrieving
cached objects. If the amount of time the object has been in the cache
exceeds the lifetime, then a task is scheduled to update the cached
object based on an object retrieved from other sorcery wizards instead.
To prevent the cached object from being retrieved during a refresh,
thread-local storage is used to mark the thread as being a stale object
update. This results in the cache returning no object, leading to
sorcery querying other wizards for the object instead.
A test has been added for stale objects as well. This test ensures that
stale objects are retrieved the same as freshly-cached objects. The test
also ensures that after an object is stale, changes in the backend are
reflected in the cache, to include if the object has been deleted from
the backend.
ASTERISK-25067
Reported by Matt Jordan
Change-Id: I9bd7c049adf6939bfe2899f393c2bfbbf412d217
Add a new ContactStatus AMI event.
Publish the following status/state changes:
Created
Removed
Reachable
Unreachable
Unknown
Contact URI, new status/state, aor and endpoint names, and the
last qualify rtt result are included in the event.
ASTERISK-25114 #close
Change-Id: Id25aae5f7122facba183273efb3e8f36c20fb61e
Reported-by: George Joseph <george.joseph@fairview5.com>
Tested-by: George Joseph <george.joseph@fairview5.com>
Use function PQescapeStringConn for escaping the name of the table and
schema instead of doing it manually.
ASTERISK-25132 #close
Reported By: Rodrigo Ramírez Norambuena <decipher.hk@gmail.com>
Change-Id: I302a263f7210d20925f14716b508b081998b7608
Incoming SIP packets larger than PJSIP_MAX_PKT_LEN were themselves
truncated before passing to pjsip_tpmgr_receive_packet, but the length
was passed unaltered, thus causing memory corruption and segfault.
ASTERISK-25122 #close
Change-Id: I608a6b6b7f229eacc33a0a7d771d18e27e5b08ab
Many uses of stasis_unsubscribe in modules can be reached through unload.
These have been switched to stasis_unsubscribe_and_join.
Some subscription callbacks do nothing, for these I've created a noop
callback function in stasis.c. This is used by some modules that monitor
MWI topics in order to enable cache, since the callback does not become
invalid after dlclose it is safe to use stasis_unsubscribe on these, even
during module unload.
ASTERISK-25121 #close
Change-Id: Ifc2549fbd8eef7d703c222978e8f452e2972189c
In addition to specifying lists of 'presence' and 'message-summary',
users can also create lists of type 'dialog'. These should be treated in
the same fashion as 'presence'.
Change-Id: I583bb69cd9f88b0b29bf09ddaddeac4e84189f6e
When a SUBSCRIBE request is made to a dialplan hint that doesn't exist,
the current NOTICE message informing users of this swaps the context and
extension parameters. This can cause a bit of confusion.
Thanks to CptBurger in #asterisk for helping to point this out.
Change-Id: Ie584d1a58ae217385c87a450ca25b55ca0e36e43
Prior to this patch, when a WebSocket connection is made, ARI would not
be informed of the connection until after the WebSocket layer had
accepted the connection. This created a brief race condition where the
ARI client would be notified that it was connected, a channel would be
sent into the Stasis dialplan application, but ARI would not yet have
registered the Stasis application presented in the HTTP request that
established the WebSocket.
This patch resolves this issue by doing the following:
* When a WebSocket attempt is made, a callback is made into the ARI
application layer, which verifies and registers the apps presented in
the HTTP request. Because we do not yet have a WebSocket, we cannot
have an event session for the corresponding applications. Some
defensive checks were thus added to make the application objects
tolerant to a NULL event session.
* When a WebSocket connection is made, the registered application is
updated with the newly created event session that wraps the WebSocket
connection.
ASTERISK-24988 #close
Reported by: Joshua Colp
Change-Id: Ia5dc60dc2b6bee76cd5aff0f69dd53b36e83f636
This patch refactors the transaction timeout processing to eliminate
calling the lower level public pjsip functions and reverts to calling
pjsip_endpt_send_request again. This is the result of me noticing
a possible incompatibility with pjproject-2.4 which was causing
contact status flapping.
The original version of this feature used the lower level calls to
get access to the tsx structure in order to cancel the transaction
when our own timer expires. Since we no longer have that access,
if our own timer expires before the pjsip timer, we call the callbacks
and just let the pjsip transaction take it's own course. When the
transaction ends, it discovers the callbacks have already been run
and just cleans itself up.
A few messages in pjsip_configuration were also added/cleaned up.
ASTERISK-25105 #close
Change-Id: I0810f3999cf63f3a72607bbecac36af0a957f33e
Reported-by: George Joseph <george.joseph@fairview5.com>
Tested-by: George Joseph <george.joseph@fairview5.com>
This makes the "object_lifetime_maximum" option operational.
On the addition of an object to an empty memory cache a scheduled
task is created which, when invoked, expires objects from the cache
which have exceeded their lifetime. If more objects have been added
the remaining life of the oldest object is used to schedule the
next invocation of the scheduled task.
If the oldest object is removed from the cache before it can be
expired automatically the scheduled task is cancelled, if possible,
and the lifetime of the next oldest is used to schedule the task.
If during these two operations no additional objects exist in the
cache then no task is scheduled.
An additional unit test has been added which verifies this
functionality.
ASTERISK-25067
Reported by: Matt Jordan
Change-Id: I87409674674a508e7717ee20739ca15cec6ba7b6
When an inbound call is received the To header is checked
for the "line" option. Some remote servers will place this
in the request URI instead. This adds an additional check for
the option in the request URI.
ASTERISK-25072 #close
Reported by: Dmitriy Serov
Change-Id: Id4e44debbb80baad623b914a88574371575353c8
This makes the "maximum_objects" option operational.
A heap has been added alongside the hash table in the cache. When
objects are added to the cache, they are also added to the heap.
Similarly, when objects are removed from the cache, they are removed
from the heap.
The heap's use comes into play when an item is to be added to a "full"
cache. When the cache is full, the oldest item is removed from the
cache, using the heap to determine the oldest item.
A unit test has been added that verifies that the maximum_objects option
works as expected and that the oldest object is removed from the cache
when an object beyond the maximum is added.
ASTERISK-25067 #close
Reported by Matt Jordan
Change-Id: I490658830e9c4cbf0b3051e4cdc4913cf9f1b73a
This change adds a basic res_sorcery_memory_cache module which implements
configuration option parsing, configuration file parsing for threading,
sorcery interface implementation, and unit tests.
Objects can be added, updated, deleted, and retrieved from the memory
cache. Automatic expiration and stale handling will be added in the
future.
Note that unit tests exist within the module itself in case the
threading done as a result of expiration results in asynchronous
actions (which it likely will). Providing access and a notification
mechanism for an external test module would be complicated and
not worth it.
ASTERISK-25067 #close
Reported by: Matt Jordan
Change-Id: Id8a6a357ef5a83d466f81eee56a67d13eeb118b9
Use ast_manager_register_xml for res_mwi_external_ami manager
actions. This ensures the module is held open while any of
the actions are being run.
ASTERISK-25117 #close
Reported by: Corey Farrell
Change-Id: Iececfdc2da498b2c32b9e09042f5f12292007ac7
This patch updates http_websocket and its corresponding implementation
with a pre-session established callback. This callback allows for
WebSocket server consumers to be notified when a WebSocket connection is
attempted, but before we accept it. Consumers can choose to reject the
connection, if their application specific logic allows for it.
As a result, this patch pulls out the previously private
websocket_protocol struct and makes it public, as
ast_websocket_protocol. In order to preserve backwards compatibility
with existing modules, the existing APIs were left as-is, and new APIs
were added for the creation of the ast_websocket_protocol as well as for
adding a sub-protocol to a WebSocket server.
In particular, the following new API calls were added:
* ast_websocket_add_protocol2 - add a protocol to the core WebSocket
server
* ast_websocket_server_add_protocol2 - add a protocol to a specific
WebSocket server
* ast_websocket_sub_protocol_alloc - allocate a sub-protocol object.
Consumers can populate this with whatever callbacks they wish to
support, then add it to the core server or a specified server.
ASTERISK-24988
Reported by: Joshua Colp
Change-Id: Ibe0bbb30c17eec6b578071bdbd197c911b620ab2
This patch fixes a number of errors and warning messages in the doxygen
log. Specifically, it addresses:
* A number of files incorrectly places a '\brief' tag immediately after
a '\file' tag. Doing so emits a warning, as '\file' takes an optional
argument specifying which file the doxygen comment is for. As '\brief'
is not a file, doxygen was unamused.
* A grouping of Stasis Topics and Messages in rtp_engine.h was
incorrectly terminated. We now correctly terminate the grouping, which
prevents members of rtp_engine.h from showing up in the wrong group.
* Group indicators which are not part of the Stasis Topics and Messages
group were removed. Group indicators without an \addtogroup or
\ingroup have no meaning.
Change-Id: Ia1415ffec6767e27233ae1cae5ed5970de5656d4
The config wizard was always pulling the first occurrence of
a variable from an ast_variable list but this gets the template
value from the list instead of any overridden value. This patch
creates ast_variable_find_last_in_list() in config.c and updates
res_pjsip_config_wizard to use it instead of
ast_variable_find_in_list. Now the overridden values, where they
exist, are used instead of template variables.
Updated test_config to test the new API.
ASTERISK-25089 #close
Reported-by: George Joseph <george.joseph@fairview5.com>
Tested-by: George Joseph <george.joseph@fairview5.com>
Change-Id: Ifa7ddefc956a463923ee6839dd1ebe021c299de4
There are 3 ways that calls directly to standard allocator functions can
be dealt with:
1. Block their use, cause them to generate an error. This is the default.
2. Replace them with the Asterisk equivalent function calls.
3. Leave them alone.
This change allows one of these 3 options to be selected by any source.
The source just needs to define ASTMM_LIBC to ASTMM_BLOCK, ASTMM_REDIRECT,
or ASTMM_IGNORE to use option 1, 2 or 3 respectively. Normally ASTMM_BLOCK
is the correct option, so it is default when ASTMM_LIBC is not defined.
In some cases when building 3rd party code it is desirable to have it use
Asterisk functions, without changing the whole source - ASTMM_REDIRECT
accomplishes this. When using 3rd party libraries sometimes a static
inline function will make use of malloc or free. In these cases it may
be unsafe to replace the allocator in the header, as it's possible the
memory could be freed by the library using standard allocators. For
those cases ASTMM_IGNORE is needed.
Change-Id: I8afef4bc7f3b93914263ae27d3a5858b69663fc7
First byte of DTLS packet shall be in range 20-63, not 20-64. Refer to RFC
https://tools.ietf.org/html/rfc5764#section-5.1.2 for correct values.
Change-Id: Iae6fa0d72b37c36a27fe40686e0ae6fba3afec31
astmm.h includes defines that are meant to cause error's when standard
allocators (malloc, calloc, free, etc) are used. It actually only
causes a warning, which is not always caught on certain sources. In
modules this unknown symbol is not detected until runtime, where the
module fails to load. This modifies the define's so that using one
of the blocked functions will cause a compile error regardless of
CFLAGS.
Moved spandsp header includes to before asterisk.h so the static inline
functions can continue using malloc and free. Although these functions
are never called and optimized away, the updated replacement macro's
would still cause a failure.
Change-Id: I532640aca0913ba9da3b18c04a0f010ca1715af5
While trying to get WebRTC working with chan_pjsip, I was running
into the following error:
Attempted to set an invalid DTLS-SRTP configuration on RTP
instance...
Josh helpfully pointed out that res_srtp.so might not be loaded, and
sure enough, it wasn't. This patch adds a ERROR indiciating as much
to hopefully help others having a similar problem.
Change-Id: I13aa477b47b299876728a21b130998a0ea6cd19f
The res_pjsip_exten_state module currently has a race condition between
processing the extension state callback from the PBX core and processing
the subscription shutdown callback from res_pjsip_pubsub. There is currently
no synchronization between the two. This can present a problem as while
the SIP subscription will remain valid the tree it points to may not.
This is in particular a problem as a task to send a NOTIFY may get queued
which will try to use the tree that may no longer be valid.
This change does the following to fix this problem:
1. All access to the subscription tree is done within the task that
sends the NOTIFY to ensure that no other thread is modifying or
destroying the tree. This task executes on the serializer for the
subscriptions.
2. A reference to the subscription serializer is kept to ensure it
remains valid for the lifetime of the extension state subscription.
3. The NOTIFY task has been changed so it will no longer attempt
to send a NOTIFY if the subscription has already been terminated.
ASTERISK-25057 #close
Reported by: Matt Jordan
Change-Id: I0b3cd2fac5be8d9b3dc5e693aaa79846eeaf5643
Creating a snoop channel in ARI and spying only on a single direction (in or
out) results in CPU utilization continually increasing until the CPU is fully
consumed. This occurs because frames are being put in the opposing direction's
slin factory queue, but not being removed.
Fixed the problem by always reading and disposing of frames from the opposite
queue of the direction selected.
ASTERISK-24938 #closes
Change-Id: I935bfd15f1db958f364d9d6b3b45582c0113dd60
Missed this module in the previous commit. res_ari_bridges uses symbols
from res_stasis_playback and res_stasis_recording.
ASTERISK-25027 #close
Reported by: Corey Farrell
Change-Id: I90bf756abd25adfc4920d2869ebe7feb636b8c5f
* Pass module to ast_cli_register and ast_cli_register_multiple.
* Add a module reference before executing any CLI callback, remove
the reference when complete.
ASTERISK-25049 #close
Reported by: Corey Farrell
Change-Id: I7aafc7c9f2b912918f28fe51d51e9e8a755750e3
ast_module_info->self is often needed to register items with the core. Many
modules have ad-hoc code to make this pointer available to auxiliary sources.
This change updates the module build process to make the needed information
available to all sources in a module.
ASTERISK-25056 #close
Reported by: Corey Farrell
Change-Id: I18c8cd58fbcb1b708425f6757becaeca9fa91815
Apply the negative connection cache setting to all connections,
even those that are not pooled. This ensures that the connection
will not be re-established before the negative connection cache
time is met.
ASTERISK-22708 #close
Change-Id: I431cc2e8584ab0b6908b3523d0a0e18c9a527271
Removed the extra space before "MODULEINFO" in res_pjsip_dlg_options.
This extra space prevented any of the dependencies from being seen by
menuselect, so building with default options would fail if PJSIP was
not installed.
This also makes the tool that extracts information for menuselect
tolerant of multiple spaces in the future.
ASTERISK-25033 #close
Reported by: Peter Whisker
Change-Id: Iccd54846f70c4a7a50cb5bf70b7bb5cb4bab3698
The res_ari_device_states module depends on res_stasis_device_state,
not res_stasis_device_states.
Change-Id: I26e02ad37f9e36bcc859867e2fad1b90452ec3de
This patch has two main purposes:
1) Improve warning messages when ACLs are configured improperly.
2) Prevent misconfigured ACLs from allowing potentially unwanted
traffic.
To acomplish point (2) in most cases, whatever configuration object that
the ACL belonged to was not allowed to load.
The one exception is res_pjsip_acl. In that case, ACLs are their own
configuration object. Furthermore, the module loading code has no
indication that a ACL configuration had a failure. So the tactic taken
here is to create an ACL that just blocks everything.
ASTERISK-24969
Reported by Corey Farrell
Change-Id: I2ebcb6959cefad03cea4d81401be946203fcacae
When the PJSIP pjsip_regc_send function is invoked and an error
status returned the caller currently decrements the reference count
of the client state that it just incremented, assuming the
registration callback would not have been invoked. In practice
this is not correct. If the failure happens after the transaction
has been set up the callback will still be invoked. This will
cause the reference count to be incorrectly decremented twice, once
by the registration callback and second by the caller of
pjsip_regc_send.
This change makes it so that whether the callback is invoked or
not is known by the caller of pjsip_regc_send. Depending on
this it can know whether it is responsible for decrementing the
reference count of the client state or not.
ASTERISK-25037 #close
Reported by: Joshua Colp
Change-Id: I749dc12f3a22115c49c5d7d95ff42a5fa45319de
A previous set of patches (see: ASTERISK-22790 & ASTERISK-23231) made it so
a v.27 modem was not allowed to have a minimum transmission rate of 2400 bits
per second. This reverts all or some of those patches since according to the
v.27ter standard a rate of 2400 bits per second is also supported.
One of the original patches also added 9600 bits per second support for v.27.
This patch also removes that since v.27ter only supports 2400/4800 bits per
second.
Also, since Asterisk specifically supports v.27ter the enum was renamed to
better reflect this.
ASTERISK-24955 #close
Reported by: Matt Jordan
Change-Id: I4b9dfb6bf7eff08463ab47ee1a74224f27cae733
Odd behaviors have been observed during outbound registrations. The most
common problem witnessed has been one where a request with
authentication credentials cannot be created after receiving a 401
response. Other behaviors include apparently processing an incorrect SIP
response.
Inspecting the code led to an apparent issue with regards to how we
handle transactions in outbound registration code. When a response to a
REGISTER arrives, we save a pointer to the transaction and then push a
task onto the registration serializer. Between the time that we save the
pointer and push the task, it's possible for the transaction to be
destroyed due to a timeout. It's also possible for the address to be
reused by the transaction layer for a new transaction.
To allow for authentication of a REGISTER request to be authenticated
after the transaction has timed out, we now hold a reference to the
original REGISTER request instead of the transaction. The function for
creating a request with authentication has been altered to take the
original request instead of the transaction where the original request
was sent.
ASTERISK-25020
Reported by Mark Michelson
Change-Id: I756c19ab05ada5d0503175db9676acf87c686d0a
ARI modules that are generated by 'make ari-stubs' are all dependent on
res_ari_model. Additionally some of the same modules depend on one or more
res_stasis_* modules.
ASTERISK-25027 #close
Reported by: Corey Farrell
Change-Id: I8e07fe7e81fedacb87232f2b6f8b5f47927b4153
This switches files used to generate other sources to use the new
ASTERISK_REGISTER_FILE macro.
ASTERISK-25026 #close
Reported by: Corey Farrell
Change-Id: Ieb2537b83421cad07c8955e5f90c405ccf079740
Sections Exist in pjsip.conf
This patch modifies the current loading strategy of the pjsip configuration. If
duplicate sections (e.g. sections containing the same [id/type]) are defined in
[pjsip.conf], the loader will consider the configuration for the given type as
invalid when the duplicate section is encountered. The entire configuration
(including what was previously loaded) for the duplicate [id/type] sections
will be rejected and destroyed, an error message is logged and the load
processing for the given stops.
ASTERISK-24996
Reported By: Ashley Sanders
Change-Id: I35090ca4cd40f1f34881dfe701a329145c347aef
When problems occur regarding outbound registrations, it currently
is difficult to debug. Most off-nominal paths had warning messages,
but sometimes we want to know what's going on before hitting the
off-nominal path. This patch adds lots of debugging output that
should give a clearer picture of what is happening with regards
to outbound registrations.
ASTERISK-25020
Reported by Mark Michelson
Change-Id: I577bde7860be0a6c872b5bcb4d5047340bf45d45
ao2 ref leak in res_rtp_asterisk.c when a DTLS policy is created.
The resources are linked into a table, but the original alloc refs
are never released. ast_strdup leak in rtp_engine.c. If
ast_rtp_dtls_cfg_copy() is called twice on the same destination struct,
a pointer to an alloc'd string is overwritten before the string is free'd.
ASTERISK-25022
Reported by: one47
Change-Id: I62a8ceb8679709f6c3769136dc6aa9a68202ff9b
* The REF_DEBUG compiler flag no longer has any effect on code that uses
Astobj2. It is used to determine if reference debugging is enabled by
default. Reference debugging can be enabled or disabled in asterisk.conf.
* Caller information is provided in logger errors for ao2 bad magic numbers.
* Optimizes AO2 by merging internal functions with the public counterpart.
This was possible now that we no longer require a dual ABI.
ASTERISK-24974 #close
Reported by: Corey Farrell
Change-Id: Icf3552721fe999365ba8a8cf00a965aa6b897cc1
Permanent contacts that hadn't been qualified yet were missing
their contact_status entries causing SEGVs when running CLI
commands.
This patch makes sure that contact_statuses are created for
both dynamic and permanent contacts when they are created.
It also adds checks in the CLI code to make sure there's a
contact_status, just in case.
ASTERISK-25018 #close
Reported-by: Ivan Poddubny
Tested-by: Ivan Poddubny
Tested-by: George Joseph
Change-Id: I3cc13e5cedcafb24c400368b515b02d7fb81e029
The way PJSIP generates an authenticated request is to use a previous
request as a template. This means that the authenticated request will
have the same Call-ID, From header (including tag), and CSeq as the
original request. PJSIP generates a new branch on the Via header to
indicate that this is a new transaction, though.
There are some SIP implementations, though, that do not notice the
change in the branch and therefore will match the authed request to the
original request's transaction. Since the CSeq is the same, the server
will repeat the response it sent to the original request.
This patch aids interoperability by increasing the CSeq of the authed
request by one.
ASTERISK-24845 #close
Reported by: Carl Fortin
Tested by: Carl Fortin
Change-Id: I39c4ca52e688a9f83bcc1878371334becdc5be01
clang can warn about a so called tautological-compare, when it finds
comparisons which are logically always true, and are therefor deemed
unnecessary.
Exanple:
unsigned int x = 4;
if (x > 0) // x is always going to be bigger than 0
Enum Case:
Each enumeration is its own type. Enums are an integer type but they
do not have to be *signed*. C leaves it up to the compiler as an
implementation option what to consider the integer type of a particu-
lar enumeration is. Gcc treats an enum without negative values as
an int while clang treats this enum as an unsigned int.
rmudgett & mmichelson: cast the enum to (unsigned int) in assert.
The cast does have an effect. For gcc, which seems to treat all enums
as int, the cast to unsigned int will eliminate the possibility of
negative values being allowed. For clang, which seems to treat enums
without any negative members as unsigned int, the cast will have no
effect. If for some reason in the future a negative value is ever
added to the enum the assert will still catch the negative value.
ASTERISK-24917
Change-Id: Ief23ef68916192b9b72dabe702b543ecfeca0b62
When Asterisk originates a channel to an application, the channel is
hung up once the application finishes executing. When the application
in question is SendFax, the Asterisk PJSIP code will attempt to reinvite
the T.38 session to audio after the FAX completes. The hangup of the
channel happens in the midst of this reinvite transaction. In most
circumstances, this works out okay because the BYE is delayed until the
reinvite transaction can complete.
However, if the reinvite that Asterisk sends receives a 401/407
response, then Asterisk's attempt to re-send the reinvite with
authentication will fail. This is because the session supplement in
res_pjsip_t38 makes the assumption that the channel on the session will
always be non-NULL. Since the channel has been hung up, though, the
channel is now NULL. Attempting to operate on the channel causes a
crash.
This patch fixes the issue by ensuring that the channel on the session
is not NULL before attempting to mess with the T.38 framehook.
This patch also contains some corrections for comments that were
incorrect and really confused me when I first started looking at the
code.
ASTERISK-25004 #close
Reported by Mark Michelson
Change-Id: Ic5a1230668369dda4bb13524098aed9306ab45a0
Currently we use pjsip_parse_hdr to validate contact uris but it
appears that it allows uris without a scheme if there's a port
supplied. I.E myexample.com will fail but myexample.com:5060 will
pass even though it has no scheme. This causes SEGVs later on
whenever the uri is used.
To prevent this, permanent_contact_validate has been updated to check
that the scheme is either 'sip' or 'sips'.
2 uses of possibly-null endpoint have also been fixed in
create_out_of_dialog_request.
ASTERISK-24999
Change-Id: Ifc17d16a4923e1045d37fe51e43bbe29fa556ca2
Reported-by: Brad Latus
clang can warn about a so called tautological-compare, when it finds
comparisons which are logically always true, and are therefor deemed
unnecessary.
Exanple:
unsigned int x = 4;
if (x > 0) // x is always going to be bigger than 0
Enum Case:
Each enumeration is its own type. Enums are an integer type but they
do not have to be *signed*. C leaves it up to the compiler as an
implementation option what to consider the integer type of a particu-
lar enumeration is. Gcc treats an enum without negative values as
an int while clang treats this enum as an unsigned int.
rmudgett & mmichelson: cast the enum to (unsigned int) in assert.
The cast does have an effect. For gcc, which seems to treat all enums
as int, the cast to unsigned int will eliminate the possibility of
negative values being allowed. For clang, which seems to treat enums
without any negative members as unsigned int, the cast will have no
effect. If for some reason in the future a negative value is ever
added to the enum the assert will still catch the negative value.
ASTERISK-24917
Change-Id: I0557ae0154a0b7de68883848a609309cdf0aee6a