channels/chan_iax2.c:
* Initialize struct chan_iax2_pvt scheduler ids earlier because of
iax2_destroy_helper().
channels/chan_sip.c:
channels/sip/config_parser.c:
* Fix initialization of scheduler id struct members. Some off nominal
paths had 0 as a scheduler id to be destroyed when it was never started.
chan_skinny.c:
* Fix some scheduler id comparisons that excluded the valid 0 id.
channel.c:
* Fix channel initialization of the video stream scheduler id.
pbx_dundi.c:
* Fix channel initialization of the packet retransmission scheduler id.
ASTERISK-25476
Change-Id: I07a3449f728f671d326a22fcbd071f150ba2e8c8
When ASTERISK-25449 was closed, a number of scheduler issues mentioned in
the comments were missed. These have since beed raised in ASTERISK-25476
and elsewhere.
This patch attempts to collect all of the scheduler issues discovered so
far and address them sensibly.
ASTERISK-25476 #close
Change-Id: I87a77d581e2e0d91d33b4b2fbff80f64a566d05b
Although ast_context_find, ast_context_find_or_create and
ast_context_destroy perform locking of the contexts table,
any context pointer can become invalid at any time that the
contexts table is unlocked. This change adds locking around
all complete operations involving these functions.
Places where ast_context_find was followed by ast_context_destroy
have been replaced with calls ast_context_destroy_by_name.
ASTERISK-25094 #close
Reported by: Corey Farrell
Change-Id: I1866b6787730c9c4f3f836b6133ffe9c820734fa
Many uses of stasis_unsubscribe in modules can be reached through unload.
These have been switched to stasis_unsubscribe_and_join.
Some subscription callbacks do nothing, for these I've created a noop
callback function in stasis.c. This is used by some modules that monitor
MWI topics in order to enable cache, since the callback does not become
invalid after dlclose it is safe to use stasis_unsubscribe on these, even
during module unload.
ASTERISK-25121 #close
Change-Id: Ifc2549fbd8eef7d703c222978e8f452e2972189c
channels/chan_iax.c: Prevent the deadlock between iax2_hangup and send_lagrq/
send_ping. This deadlock happens because the scheduled task send_lagrq(or
send_ping) starts execution after the call hangup procedure starts but before
it deletes the tasks in the scheduler.
The solution is to delete scheduled lagrq (and ping) task asynchronously
(i.e. schedule AST_SCHED_DEL for these tasks); By this, AST_SCHED_DEL will
be called in a new context (doesn't have callno locked).
This commit also cleans up the procedure of sending LAGRQ and PING.
main/sched.c: Do not assert when deleting non existant entry from scheduler.
This assert seems to be the reason for a lot of awkward code to avoid it.
ASTERISK-24983 #close
Reported by: Y Ateya
Change-Id: I03bec1fc8faacb89630269e935fa667c6d6c080c
This patch has two main purposes:
1) Improve warning messages when ACLs are configured improperly.
2) Prevent misconfigured ACLs from allowing potentially unwanted
traffic.
To acomplish point (2) in most cases, whatever configuration object that
the ACL belonged to was not allowed to load.
The one exception is res_pjsip_acl. In that case, ACLs are their own
configuration object. Furthermore, the module loading code has no
indication that a ACL configuration had a failure. So the tactic taken
here is to create an ACL that just blocks everything.
ASTERISK-24969
Reported by Corey Farrell
Change-Id: I2ebcb6959cefad03cea4d81401be946203fcacae
Flags are 64 bits. Without LLU suffix the value of 1<<31 is negative.
Although it doesn't have an effect on the current implementation, it will
be problem if more flags are added.
Change-Id: Ic290c81cfbbbf062872392d99d3322932cc49487
Git does not support the ability to replace a token with a version
string during check-in. While it does have support for replacing a
token on clone, this is somewhat sub-optimal: the token is replaced
with the object hash, which is not particularly easy for human
consumption. What's more, in practice, the source file version was often
not terribly useful. Generally, when triaging bugs, the overall version
of Asterisk is far more useful than an individual SVN version of a file. As a
result, this patch removes Asterisk's support for showing source file
versions.
Specifically, it does the following:
* Rename ASTERISK_FILE_VERSION macro to ASTERISK_REGISTER_FILE, and
remove passing the version in with the macro. Other facilities
than 'core show file version' make use of the file names, such as
setting a debug level only on a specific file. As such, the act of
registering source files with the Asterisk core still has use. The
macro rename now reflects the new macro purpose.
* main/asterisk:
- Refactor the file_version structure to reflect that it no longer
tracks a version field.
- Remove the "core show file version" CLI command. Without the file
version, it is no longer useful.
- Remove the ast_file_version_find function. The file version is no
longer tracked.
- Rename ast_register_file_version/ast_unregister_file_version to
ast_register_file/ast_unregister_file, respectively.
* main/manager: Remove value from the Version key of the ModuleCheck
Action. The actual key itself has not been removed, as doing so would
absolutely constitute a backwards incompatible change. However, since
the file version is no longer tracked, there is no need to attempt to
include it in the Version key.
* UPGRADE: Add notes for:
- Modification to the ModuleCheck AMI Action
- Removal of the "core show file version" CLI command
Change-Id: I6cf0ff280e1668bf4957dc21f32a5ff43444a40e
POKE is used to check for peer availability; however, in networks with packet
loss, the current calculations may result in POKE expiration times that are too
short. This patch alters the expiration/retry time logic to take into account
the last known qualify round trip time, as opposed to always using a static
value for each peer.
Review: https://reviewboard.asterisk.org/r/4536
ASTERISK-22352 #close
Reported by: Frederic Van Espen
ASTERISK-24894 #close
Reported by: Y Ateya
patches:
poke_noanswer_duration.diff submitted by Y Ateya (License 6693)
........
Merged revisions 434564 from http://svn.asterisk.org/svn/asterisk/branches/11
........
Merged revisions 434565 from http://svn.asterisk.org/svn/asterisk/branches/13
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@434566 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch adds a new configuration parameter, 'calltokenexpiration', that
controls how long before an authentication call token is expired. The default
maintains the RFC specified 10 seconds. Setting it to a higher value may be
useful in lossy networks.
Review: https://reviewboard.asterisk.org/r/4588
ASTERISK-24939 #close
Reported by: Y Ateya
patches:
ctoken_configuration.diff submitted by Y Ateya (License 6693)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@434563 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch fixes an access to the peer callnumber that is unprotected by a
corresponding mutex. The peer->callno value can be changed by multiple threads,
and all data inside the iaxs array must be procted by a corresponding lock
of iaxsl.
The patch moves the unprotected access to a location where the mutex is
safely obtained.
Review: https://reviewboard.asterisk.org/r/4599/
ASTERISK-21211 #close
Reported by: Jaco Kroon
patches:
asterisk-11.2.1-iax2_poke-segfault.diff submitted by Jaco Kroon (License 5671)
........
Merged revisions 434291 from http://svn.asterisk.org/svn/asterisk/branches/11
........
Merged revisions 434292 from http://svn.asterisk.org/svn/asterisk/branches/13
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@434293 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Switch logger callid's from AO2 objects to simple integers.
This helps in two ways. Copying integers is faster than
referencing AO2 objects, so this will result in a small
reduction in logger overhead. This also erases the possibility
of an infinate loop caused by an invalid callid in
threadstorage.
ASTERISK-24833 #comment Committed callid conversion to trunk.
Reported by: Corey Farrell
Review: https://reviewboard.asterisk.org/r/4466/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@432834 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Calling ast_channel_bridge_peer() cannot be done while holding any channel
locks. The reported issue hit the deadlock in chan_iax2, but an audit of
the ast_channel_bridge_peer() calls found three more locations where the
same deadlock can occur.
* Made CHANNEL(peer), res_fax, and the SNMP agent not call
ast_channel_bridge_peer() with any channel locked. For CHANNEL(peer) I
had to rework the logic to not hold the channel lock.
* Made chan_iax2 no longer call ast_channel_bridge_peer(). It was done
for legacy reasons that no longer apply.
* Removed the iax.conf forcejitterbuffer option. It is now always enabled
when the jitterbuffer option is enabled. If you put a jitter buffer on a
channel it will be on the channel.
ASTERISK-24600 #close
Reported by: Jeff Collell
Review: https://reviewboard.asterisk.org/r/4342/
........
Merged revisions 430817 from http://svn.asterisk.org/svn/asterisk/branches/13
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@430819 65c4cc65-6c06-0410-ace0-fbb531ad65f3
* Made the following AMI actions use list API calls for consistency:
Agents
BridgeInfo
BridgeList
BridgeTechnologyList
ConfbridgeLIst
ConfbridgeLIstRooms
CoreShowChannels
DAHDIShowChannels
DBGet
DeviceStateList
ExtensionStateList
FAXSessions
Hangup
IAXpeerlist
IAXpeers
IAXregistry
MeetmeList
MeetmeListRooms
MWIGet
ParkedCalls
Parkinglots
PJSIPShowEndpoint
PJSIPShowEndpoints
PJSIPShowRegistrationsInbound
PJSIPShowRegistrationsOutbound
PJSIPShowResourceLists
PJSIPShowSubscriptionsInbound
PJSIPShowSubscriptionsOutbound
PresenceStateList
PRIShowSpans
QueueStatus
QueueSummary
ShowDialPlan
SIPpeers
SIPpeerstatus
SIPshowregistry
SKINNYdevices
SKINNYlines
Status
VoicemailUsersList
* Incremented the AMI version to 2.7.0.
* Changed astman_send_listack() to not use the listflag parameter and
always set the value to "Start" so the start capitalization is consistent.
i.e., The FAXSessions used "Start" while the rest of the system used
"start". The corresponding complete event always used "Complete".
* Fixed ami_show_resource_lists() "PJSIPShowResourceLists" to output the
AMI ActionID for all of its list events.
* Fixed off-nominal AMI protocol error in manager_bridge_info(),
manager_parking_status_single_lot(), and
manager_parking_status_all_lots(). Use of astman_send_error() after
responding to the original AMI action request violates the action response
pattern by sending two responses.
* Fixed minor protocol error in action_getconfig() when no requested
categories are found. Each line needs to be formatted as "Header: text".
* Fixed off-nominal memory leak in manager_build_parked_call_string().
* Eliminated unnecessary use of RAII_VAR() in ami_subscription_detail().
ASTERISK-24049 #close
Reported by: Jonathan Rose
Review: https://reviewboard.asterisk.org/r/4315/
........
Merged revisions 430434 from http://svn.asterisk.org/svn/asterisk/branches/13
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@430435 65c4cc65-6c06-0410-ace0-fbb531ad65f3
In r413586 (1.8) various casts were added to silence gcc 4.10 warnings.
Those fixes included things like:
-out += sprintf(out, "%%%02X", (unsigned char) *ptr);
+out += sprintf(out, "%%%02X", (unsigned) *ptr);
That works for low ascii characters, but for the high range that yields
e.g. FFFFFFC3 when C3 is expected.
This changeset:
- fixes those casts to use the 'hh' unsigned char modifier instead
- consistently uses %02x instead of %2.2x (or other non-standard usage)
- adds a few 'h' modifiers in various places
- fixes a 'replcaes' typo
- dev/urandon typo (in 13+ patch)
Review: https://reviewboard.asterisk.org/r/4263/
ASTERISK-24619 #close
Reported by: Stefan27 (on IRC)
........
Merged revisions 429673 from http://svn.asterisk.org/svn/asterisk/branches/11
........
Merged revisions 429674 from http://svn.asterisk.org/svn/asterisk/branches/12
........
Merged revisions 429675 from http://svn.asterisk.org/svn/asterisk/branches/13
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@429683 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Prior to this patch, all Stasis subscriptions would receive a dedicated
thread for servicing published messages. In contrast, prior to r400178
(see review https://reviewboard.asterisk.org/r/2881/), the subscriptions
shared a thread pool. It was discovered during some initial work on Stasis
that, for a low subscription count with high message throughput, the
threadpool was not as performant as simply having a dedicated thread per
subscriber.
For situations where a subscriber receives a substantial number of messages
and is always present, the model of having a dedicated thread per subscriber
makes sense. While we still have plenty of subscriptions that would follow
this model, e.g., AMI, CDRs, CEL, etc., there are plenty that also fall into
the following two categories:
* Large number of subscriptions, specifically those tied to endpoints/peers.
* Low number of messages. Some subscriptions exist specifically to coordinate
a single message - the subscription is created, a message is published, the
delivery is synchronized, and the subscription is destroyed.
In both of the latter two cases, creating a dedicated thread is wasteful (and
in the case of a large number of peers/endpoints, harmful). In those cases,
having shared delivery threads is far more performant.
This patch adds the ability of a subscriber to Stasis to choose whether or not
their messages are dispatched on a dedicated thread or on a threadpool. The
threadpool is configurable through stasis.conf.
Review: https://reviewboard.asterisk.org/r/4193
ASTERISK-24533 #close
Reported by: xrobau
Tested by: xrobau
........
Merged revisions 428681 from http://svn.asterisk.org/svn/asterisk/branches/12
........
Merged revisions 428687 from http://svn.asterisk.org/svn/asterisk/branches/13
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@428688 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Performing a directed call pickup resulted in a deadlock when PJSIP
channels were involved.
A masquerade needs to hold onto the channel locks while it swaps channel
information between the two channels involved in the masquerade. With
PJSIP channels, the fixup routine needed to push a fixup task onto the
PJSIP channel's serializer. Unfortunately, if the serializer was also
processing a task that needed to lock the channel, you get deadlock.
* Added a new control frame that is used to notify the channels that a
masquerade is about to start and when it has completed.
* Added the ability to query taskprocessors if the current thread is the
taskprocessor thread.
* Added the ability to suspend/unsuspend the PJSIP serializer thread so a
masquerade could fixup the PJSIP channel without using the serializer.
ASTERISK-24356 #close
Reported by: rmudgett
Review: https://reviewboard.asterisk.org/r/4034/
........
Merged revisions 424471 from http://svn.asterisk.org/svn/asterisk/branches/12
........
Merged revisions 424472 from http://svn.asterisk.org/svn/asterisk/branches/13
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@424473 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The reporter on the issue found some issues when upgrading from version 10 to 11
on 55 hosts.
Two situations that can occur with dynamic registrations.
1. With dnsmgr disabled, if the host is not resolvable we are not trying to
resolve the host again when it is time to attempt to register again. This
results in never registering to the host.
2. With dnsmgr enabled, when the host is temporarily not resolvable the
address is set to 0.0.0.0:0 and then when the host is resolvable the port
is not being restored and stays set to 0.
This patch resolves these two issues by:
* Storing the hostname so that it can be used for resolving with DNS.
* Resolve the hostname on the next scheduled attempt to register.
* Storing the port used to reach the host so that when the hostname is
resolvable again, we can set the port again if the port is still unset after
looking up the host.
ASTERISK-23767 #close
Reported by: David Herselman
Tested by: David Herselman, Michael L. Young
Patches:
asterisk-23767-dns_reg_retry_and_set_port_11_v3.diff
uploaded by Michael L. Young (license 5026)
Review: https://reviewboard.asterisk.org/r/3856/
........
Merged revisions 422274 from http://svn.asterisk.org/svn/asterisk/branches/11
........
Merged revisions 422275 from http://svn.asterisk.org/svn/asterisk/branches/12
........
Merged revisions 422276 from http://svn.asterisk.org/svn/asterisk/branches/13
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@422277 65c4cc65-6c06-0410-ace0-fbb531ad65f3
* Fixed the iax.conf bandwidth option. This is the root cause of
ASTERISK-24150.
* Added checks in iax2_request() to ensure that there are actual formats
requested for the new channel to prevent any more fracks from issues like
ASTERISK-24150. This is a consequence of the iax.conf bandwidth option
not working.
* Fixed struct iax2_codec_pref.order member size mismatch issue when
converting to and from the codec preference order list passed over the
wire. In addition the values sent over the wire are now compatible with
previous Asterisk versions.
* Fixed several issues dealing with the struct iax2_codec_pref members.
Off-by-one, array limit errors, and the order/framing members always need
to be updated together.
* Made iax2_request() setup the channel's native format preference order
according to the user's wishes. The new media format strategy needs the
order specified earler.
* Fixed usage of ast_format_compatibility_bitfield2format(). The function
can return NULL if the bitfield was not associated with a function.
* Deleted dead code iax2_codec_pref_getsize() and
iax2_codec_pref_setsize().
* Made iax2_parse_allow_disallow() and iax2_codec_pref_string() call
iax2_codec_pref_to_cap() instead of inlining it.
* Made IAX_CAPABILITY_MEDBANDWIDTH, IAX_CAPABILITY_LOWBANDWIDTH, and
IAX_CAPABILITY_LOWFREE constants again as they were in Asterisk v1.8.
* Renamed prefs to prefs_global so it won't get confused with the local
pref versions.
* Fixed too small buffer in handle_cli_iax2_show_peer().
* Fixed ast_cli() calls in handle_cli_iax2_show_peer() to output complete
lines.
* Changed struct create_addr_info.prefs to be struct iax2_codec_pref as an
optimization so iax2_request() and iax2_call() do less work.
* Fixed a potential deadlock in ast_iax2_new() on an off-nominal path when
the pbx could not get started.
* Made set_config() setup a local prefs list along side the local
capability format bitfield. Once the config is loaded, then the local
copies are put into the global versions.
* Fix unininialized codec_buf in function_iaxpeer().
ASTERISK-24150 #close
Reported by: Scott Griepentrog
Review: https://reviewboard.asterisk.org/r/3890/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@420364 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch serves two purposes:
(1) It fixes some bugs with endpoint subscriptions not reporting all of the
channel events
(2) It serves as the preliminary work needed for ASTERISK-23692, which allows
for sending/receiving arbitrary out of call text messages through ARI in a
technology agnostic fashion.
The messaging functionality described on ASTERISK-23692 requires two things:
(1) The ability to send/receive messages associated with an endpoint. This is
relatively straight forwards with the endpoint core in Asterisk now.
(2) The ability to send/receive messages associated with a technology and an
arbitrary technology defined URI. This is less straight forward, as
endpoints are formed from a tech + resource pair. We don't have a
mechanism to note that a technology that *may* have endpoints exists.
This patch provides such a mechanism, and fixes a few bugs along the way.
The first major bug this patch fixes is the forwarding of channel messages
to their respective endpoints. Prior to this patch, there were two problems:
(1) Channel caching messages weren't forwarded. Thus, the endpoints missed
most of the interesting bits (such as channel creation, destruction, state
changes, etc.)
(2) Channels weren't associated with their endpoint until after creation.
This resulted in endpoints missing the channel creation message, which
limited the usefulness of the subscription in the first place (a major use
case being 'tell me when this endpoint has a channel'). Unfortunately,
this meant another parameter to ast_channel_alloc. Since not all channel
technologies support an ast_endpoint, this patch makes such a call
optional and opts for a new function, ast_channel_alloc_with_endpoint.
When endpoints are created, they will implicitly create a technology endpoint
for their technology (if one does not already exist). A technology endpoint is
special in that it has no state, cannot have channels created for it, cannot
be created explicitly, and cannot be destroyed except on shutdown. It does,
however, have all messages from other endpoints in its technology forwarded to
it.
Combined with the bug fixes, we now have Stasis messages being properly
forwarded. Consider the following scenario: two PJSIP endpoints (foo and bar),
where bar has a single channel associated with it and foo has two channels
associated with it. The messages would be forwarded as follows:
channel PJSIP/foo-1 --
\
--> endpoint PJSIP/foo --
/ \
channel PJSIP/foo-2 -- \
---- > endpoint PJSIP
/
channel PJSIP/bar-1 -----> endpoint PJSIP/bar --
ARI, through the applications resource, can:
- subscribe to endpoint:PJSIP/foo and get notifications for channels
PJSIP/foo-1,PJSIP/foo-2 and endpoint PJSIP/foo
- subscribe to endpoint:PJSIP/bar and get notifications for channels
PJSIP/bar-1 and endpoint PJSIP/bar
- subscribe to endpoint:PJSIP and get notifications for channels
PJSIP/foo-1,PJSIP/foo-2,PJSIP/bar-1 and endpoints PJSIP/foo,PJSIP/bar
Note that since endpoint PJSIP never changes, it never has events itself. It
merely provides an aggregation point for all other endpoints in its technology
(which in turn aggregate all channel messages associated with that endpoint).
This patch also adds endpoints to res_xmpp and chan_motif, because the actual
messaging work will need it (messaging without XMPP is just sad).
Review: https://reviewboard.asterisk.org/r/3760/
ASTERISK-23692
........
Merged revisions 419196 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@419203 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The iax2_best_codec function was changed to convert the formats
into a format compatibilities structure and grab the first
format from it. The resulting order differs from the previous
order of iax2_best_codec which causes unexpected formats to
get chosen (such as g723).
This commit brings back the old behavior of iax2_best_codec by
having a specified preference list.
Review: https://reviewboard.asterisk.org/r/3835/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@419180 65c4cc65-6c06-0410-ace0-fbb531ad65f3
After merging the media formats branch, chan_iax2 was discarding
codec preferences for the purpose of choosing which codec a
channel would use once a call started. This patch restores the
Asterisk 1.8-12 codec choice behaviors.
ASTERISK-23958 #close
Review: https://reviewboard.asterisk.org/r/3800/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@419109 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Much needed was a way to assign id to objects on creation, and
much change was necessary to accomplish it. Channel uniqueids
and linkedids are split into separate string and creation time
components without breaking linkedid propgation. This allowed
the uniqueid to be specified by the user interface - and those
values are now carried through to channel creation, adding the
assignedids value to every function in the chain including the
channel drivers. For local channels, the second channel can be
specified or left to default to a ;2 suffix of first. In ARI,
bridge, playback, and snoop objects can also be created with a
specified uniqueid.
Along the way, the args order to allocating channels was fixed
in chan_mgcp and chan_gtalk, and linkedid is no longer lost as
masquerade occurs.
(closes issue ASTERISK-23120)
Review: https://reviewboard.asterisk.org/r/3191/
........
Merged revisions 410157 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@410158 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Establishing an IAX2 call between Asterisk v1.4 and v1.8 (or later)
results in an unexpected call disconnect. The problem happens because
newer values in the enum ast_control_frame_type are not consistent between
the branch versions of Asterisk.
For example:
1) v1.4 calls v1.8 (or later) using IAX2
2) v1.8 answers and sends a connected line update control frame. (on v1.8
AST_CONTROL_CONNECTED_LINE = 22)
3) v1.4 receives the control frame as an end-of-q (on v1.4
AST_CONTROL_END_OF_Q = 22)
4) v1.4 disconnects the call once the receive queue becomes empty.
Several things are done by this patch to fix the problem and attempt to
prevent it from happening again in the future:
* Added a warning at the definition of enum ast_control_frame_type about
how to add new control frame values.
* Made block sending and receiving control frames that have no reason to
go over the wire.
* Extended the connectedline iax.conf parameter to also include the
redirecting information updates.
* Updated the connectedline iax.conf parameter documentation to include a
notice that the parameter must be "no" when the peer is an Asterisk v1.4
instance.
(closes issue AST-1302)
Review: https://reviewboard.asterisk.org/r/3174/
........
Merged revisions 407678 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 407727 from http://svn.asterisk.org/svn/asterisk/branches/11
........
Merged revisions 407729 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@407731 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Fixes typos of "transfered" instead of "transferred" in various code. Fixes incorrect gosub param help text for app_queue.
Fixes Asterisk man pages containing unquoted minus signs. Adds note about the "textsupport" option in sip.conf.sample.
(issue ASTERISK-23061)
(issue ASTERISK-23028)
(issue ASTERISK-23046)
(issue ASTERISK-23027)
(closes issue ASTERISK-23061)
(closes issue ASTERISK-23028)
(closes issue ASTERISK-23046)
(closes issue ASTERISK-23027)
Reported by: Eugene, Jeremy Laine, Denis Pantsyrev
Patches:
transferred.patch uploaded by Jeremy Laine (license 6561)
hyphen.patch uploaded by Jeremy Laine (license 6561)
sip.conf.sample.patch uploaded by Eugene (license 6360)
........
Merged revisions 405791 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 405792 from http://svn.asterisk.org/svn/asterisk/branches/11
........
Merged revisions 405829 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@405830 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This change is in preparation for external MWI support.
Removed code from the system for normal mailbox handling that appends
@default to the mailbox identifier if it does not have a context. The
only exception is the legacy hasvoicemail users.conf option. The legacy
option will only work for app_voicemail mailboxes. The system cannot make
any assumptions about the format of the mailbox identifer used by
app_voicemail.
chan_sip and chan_dahdi/sig_pri had the most changes because they both
tried to interpret the mailbox identifier. chan_sip just stored and
compared the two components. chan_dahdi actually used the box
information.
The ISDN MWI support configuration options had to be reworked because
chan_dahdi was parsing the box@context format to get the box number. As a
result the mwi_vm_boxes chan_dahdi.conf option was added and is documented
in the chan_dahdi.conf.sample file.
Review: https://reviewboard.asterisk.org/r/3072/
........
Merged revisions 404348 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@404350 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Original commit message by mmichelson (asterisk 12 r403311):
"This adds channel locks around calls to create channel snapshots as well
as other functions which operate on a channel and then end up
creating a channel snapshot. Functions that expect the channel to be
locked prior to being called have had their documentation updated to
indicate such."
The above was initially committed and then reverted at r403398. The problem
was found to be in core_local.c in the publish_local_bridge_message function.
The ast_unreal_lock_all function locks and adds a reference to the returned
channels and while they were being unlocked they were not being unreffed when
no longer needed. Fixed by unreffing the channels.
Also in bridge.c a lock was obtained on "other->chan", but then an attempt was
made to unlock "other" and not the previously locked channel. Fixed by
unlocking "other->chan"
(closes issue ASTERISK-22709)
Reported by: John Bigelow
........
Merged revisions 404237 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@404260 65c4cc65-6c06-0410-ace0-fbb531ad65f3
