Asterisk Generic AOC Representation
- Generic AOC encode/decode routines.
(Generic AOC must be encoded to be passed on the wire in the AST_CONTROL_AOC frame)
- AST_CONTROL_AOC frame type to represent generic encoded AOC data
- Manager events for AOC-S, AOC-D, and AOC-E messages
Asterisk App Support
- app_dial AOC-S pass-through support on call setup
- app_queue AOC-S pass-through support on call setup
AOC Unit Tests
- AOC Unit Tests for encode/decode routines
- AOC Unit Test for manager event representation.
SIP AOC Support
- Pass-through of generic AOC-D and AOC-E messages to snom phones via the
snom AOC specification.
- Creation of chan_sip page3 flags for the addition of the new
'snom_aoc_enabled' sip.conf option.
IAX AOC Support
- Natively supports AOC pass-through through the use of the new
AST_CONTROL_AOC frame type
DAHDI AOC Support
- ETSI PRI full AOC Pass-through support
- 'aoc_enable' chan_dahdi.conf option for independently enabling
pass-through of AOC-S, AOC-D, AOC-E.
- 'aoce_delayhangup' option for retrieving AOC-E on disconnect.
- DAHDI A() dial string option for requesting AOC services.
example usage:
;requests AOC-S, AOC-D, and AOC-E on call setup
exten=>1111,1,Dial(DAHDI/g1/1112/A(s,d,e))
Review: https://reviewboard.asterisk.org/r/552/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@267096 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Patch supplied by reporter was modified to use autoservice and
prevent a potential channel ref leak but is otherwise as the
reporter uploaded it.
(closes issue #17182)
Reported by: rcasas
Patches:
app_senddtmf.c.patch_trunk uploaded by rcasas (license 641)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@265453 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r265089 | mmichelson | 2010-05-21 15:59:14 -0500 (Fri, 21 May 2010) | 8 lines
Don't hang up on a queue caller if the file we attempt to play does not exist.
This also fixes a documentation mistake in file.h that made my original attempt
to correct this problem not work correctly.
(closes issue #17061)
Reported by: RoadKill
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@265090 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The connected line update macro would not get run if the connected line
number string was empty. The number could be empty if the connected line
update did not update a number but the name. It should be run if there
was an AST_CONTROL_CONNECTED_LINE frame received for pending dials and
queues.
Renamed and added some more comments for some confusing identifiers
directly connected to the related code.
Also fixed a memory leak in app_queue.
Review: https://reviewboard.asterisk.org/r/669/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@264669 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r263769 | jpeeler | 2010-05-18 13:54:58 -0500 (Tue, 18 May 2010) | 10 lines
Modify directory name reading to be interrupted with operator or pound escape.
In the case of accidentally entering the wrong first three letters for the
reading, users could be very frustrated if the name listing is very long. This
allows interrupting the reading by pressing 0 or #. 0 will attempt to execute
a configured operator (o) extension and # will exit and proceed in the
dialplan.
ABE-2200
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@263807 65c4cc65-6c06-0410-ace0-fbb531ad65f3
From reviewboard:
Digium has a commercial customer who has made extensive use of the connected party and
redirecting information present in later versions of Asterisk Business Edition and which
is to be in the upcoming 1.8 release. Through their use of the feature, new problems and solutions
have come about. This patch adds several enhancements to maximize usage of the connected party
and redirecting information functionality.
First, Asterisk trunk already had connected line interception macros. These macros allow you to
manipulate connected line information before it was sent out to its target. This patch adds the
same feature except for redirecting information instead.
Second, the ast_callerid and ast_party_id structures have been enhanced to provide a "tag." This
tag can be set with func_callerid, func_connectedline, func_redirecting, and in the case of DAHDI,
mISDN, and SIP channels, can be set in a configuration file. The idea behind the callerid tag is
that it can be set to whatever value the administrator likes. Later, when running connected line
and redirecting macros, the admin can read the tag off the appropriate structure to determine what
action to take. You can think of this sort of like a channel variable, except that instead of having
the variable associated with a channel, the variable is associated with a specific identity within
Asterisk.
Third, app_dial has two new options, s and u. The s option lets a dialplan writer force a specific
caller ID tag to be placed on the outgoing channel. The u option allows the dialplan writer to force
a specific calling presentation value on the outgoing channel.
Fourth, there is a new control frame subclass called AST_CONTROL_READ_ACTION added. This was added
to correct a very specific situation. In the case of SIP semi-attended (blond) transfers, the party
being transferred would not have the opportunity to run a connected line interception macro to
possibly alter the transfer target's connected line information. The issue here was that during a
blond transfer, the SIP transfer code has no bridged channel on which to queue the connected line
update. The way this was corrected was to add this new control frame subclass. Now, we queue an
AST_CONTROL_READ_ACTION frame on the channel on which the connected line interception macro should
be run. When ast_read is called to read the frame, ast_read responds by calling a callback function
associated with the specific read action the control frame describes. In this case, the action taken
is to run the connected line interception macro on the transferee's channel.
Review: https://reviewboard.asterisk.org/r/652/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@263541 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r262662 | dvossel | 2010-05-12 12:00:04 -0500 (Wed, 12 May 2010) | 11 lines
fixes app_meetme dsp error
We attempted to detect silence after translating a frame
from signed linear. This caused a flooding of errors. To
resolve this the code to detect silence was moved before the
translation.
(closes issue #17133)
Reported by: jsdyer
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@262744 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Where a site uses VoicemailMain(mailbox) the users have to be at their own extension to clear
their voicemail, they have no way of escaping VoicemailMain to allow entry of new boxnumber.
This patch, allows a site to include to 'a' priority in the VoicemailMain context, to allow an escape.
If the 'a' priority doesn't exist in the context that VoicemailMain was called from then it acts as the old behaviour.
Reported by: alecdavis
Tested by: alecdavis
Patch
vm_a_extension.diff2.txt uploaded by alecdavis (license 585)
Review: https://reviewboard.asterisk.org/r/489/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@262005 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r261735 | jpeeler | 2010-05-06 15:10:59 -0500 (Thu, 06 May 2010) | 8 lines
Only allow the operator key to be accepted after leaving a voicemail.
Or rather disallow the operator key from being accepted when not offered,
such as after finishing a recording from within the mailbox options menu.
ABE-2121
SWP-1267
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@261736 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r260923 | jpeeler | 2010-05-04 13:46:46 -0500 (Tue, 04 May 2010) | 12 lines
Voicemail transfer to operator should occur immediately, not after main menu.
There were two scenarios in the advanced options that while using the
operator=yes and review=yes options, the transfer occurred only after exiting
the main menu (after sending a reply or leaving a message for an extension).
Now after the audio is processed for the reply or message the transfer occurs
immediately as expected.
ABE-2107
ABE-2108
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@260924 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch adds the following in-conference admin DTMF features:
*81 - Roll call (or simply user count if INTROUSER isn't enabled)
*82 - Eject all non-admins
*83 - Mute/unmute all non-admins
*84 - Start recording the conference on the fly
FWIW, this code uses newly recorded prompts.
(closes issue #16379)
Reported by: rfinnie
Patches:
meetme-enhancements-232771-v1.patch uploaded by rfinnie (license 940)
modified slightly by me
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@260757 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When a specific position is specified for the queue, the idea
was that the caller cannot be placed ahead of higher-priority
callers. Unfortunately, the logic was reversed so that the caller
could ONLY be placed ahead of higher priority callers.
Discovered while writing a unit test.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@260344 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This module implements an abstraction for retrieving and exporting
asterisk data.
Developed by:
Brett Bryant <brettbryant@gmail.com>
Eliel C. Sardanons (LU1ALY) <eliels@gmail.com>
For the Google Summer of code 2009 Project.
Documentation can be found in doxygen format and inside the
header include/asterisk/data.h
Review: https://reviewboard.asterisk.org/r/275/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@258517 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r258432 | jpeeler | 2010-04-21 16:45:36 -0500 (Wed, 21 Apr 2010) | 8 lines
Fix looping forever when no input received in certain voicemail menu scenarios.
Specifically, prompting for an extension (when leaving or forwarding a message)
or when prompting for a digit (when saving a message or changing folders).
ABE-2122
SWP-1268
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@258433 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Added a new manager command to mute/unmute MixMonitor audio on a channel.
Added a new feature to audiohooks so that you can mute either read / write
(or both) types of frames - this allows for MixMonitor to mute either side
of the conversation without affecting the conversation itself.
(closes issue #16740)
Reported by: jmls
Review: https://reviewboard.asterisk.org/r/487/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@258190 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r258029 | jpeeler | 2010-04-20 11:16:33 -0500 (Tue, 20 Apr 2010) | 11 lines
Play correct prompt when voicemail store failure occurs after attempted forward.
If a user's mailbox was full and a message was attempted to be forwarded to
said box, warnings on the console would indicate failure. However, the played
prompt was that of success (vm-msgsaved). Now storage failure is taken into
account and the correct prompt (vm-mailboxfull) is played when appropriate.
ABE-2123
SWP-1262
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@258065 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r257686 | dhubbard | 2010-04-16 16:15:43 -0500 (Fri, 16 Apr 2010) | 21 lines
Make the mixmonitor thread process audio frames faster
Mantis issue 17078 reports MixMonitor recordings have shorter durations than
the call duration. This was because the mixmonitor thread was not processing
frames from the audiohook fast enough. The mixmonitor thread would slowly fall
behind the most recent audio frame and when the channel hangs up, the mixmonitor
thread would exit without processing the same number of frames as the channel;
leaving the mixmonitor recording shorter than actual call duration.
This revision fixes this issue by moving the ast_audiohook_trigger_wait() and
the subsequent audiohook.status check into the block where the
ast_audiohook_read_frame() function returns NULL.
(closes issue #17078)
Reported by: geoff2010
Patches:
dw-M17078.patch uploaded by dhubbard (license 733)
Tested by: dhubbard, geoff2010
Review: https://reviewboard.asterisk.org/r/611/
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@257713 65c4cc65-6c06-0410-ace0-fbb531ad65f3
From Reviewboard:
CCSS stands for Call Completion Supplementary Services. An admittedly out-of-date
overview of the architecture can be found in the file doc/CCSS_architecture.pdf
in the CCSS branch. Off the top of my head, the big differences between what is
implemented and what is in the document are as follows:
1. We did not end up modifying the Hangup application at all.
2. The document states that a single call completion monitor may be used across
multiple calls to the same device. This proved to not be such a good idea
when implementing protocol-specific monitors, and so we ended up using one
monitor per-device per-call.
3. There are some configuration options which were conceived after the document
was written. These are documented in the ccss.conf.sample that is on this
review request.
For some basic understanding of terminology used throughout this code, see the
ccss.tex document that is on this review.
This implements CCBS and CCNR in several flavors.
First up is a "generic" implementation, which can work over any channel technology
provided that the channel technology can accurately report device state. Call
completion is requested using the dialplan application CallCompletionRequest and can
be canceled using CallCompletionCancel. Device state subscriptions are used in order
to monitor the state of called parties.
Next, there is a SIP-specific implementation of call completion. This method uses the
methods outlined in draft-ietf-bliss-call-completion-06 to implement call completion
using SIP signaling. There are a few things to note here:
* The agent/monitor terminology used throughout Asterisk sometimes is the reverse of
what is defined in the referenced draft.
* Implementation of the draft required support for SIP PUBLISH. I attempted to write
this in a generic-enough fashion such that if someone were to want to write PUBLISH
support for other event packages, such as dialog-state or presence, most of the effort
would be in writing callbacks specific to the event package.
* A subportion of supporting PUBLISH reception was that we had to implement a PIDF
parser. The PIDF support added is a bit minimal. I first wrote a validation
routine to ensure that the PIDF document is formatted properly. The rest of the
PIDF reading is done in-line in the call-completion-specific PUBLISH-handling
code. In other words, while there is PIDF support here, it is not in any state
where it could easily be applied to other event packages as is.
Finally, there are a variety of ISDN-related call completion protocols supported. These
were written by Richard Mudgett, and as such I can't really say much about their
implementation. There are notes in the CHANGES file that indicate the ISDN protocols
over which call completion is supported.
Review: https://reviewboard.asterisk.org/r/523
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@256528 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Fix app_dial.c:do_forward() OPT_FORCECLID setting cid.cid_num with a stack
allocated string instead of a heap allocated string.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@256103 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Some platforms prefix externally-visible symbols in object files generated
from C sources (most commonly, '_' is the prefix). On these platforms,
the existing symbol export filtering process ends up suppressing all the symbols
that are supposed to be left visible. This patch allows the prefix string
to be supplied to the top-level Makefile in the LINKER_SYMBOL_PREFIX variable,
and then generates the linker scripts as required to include the prefix
supplied.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@255906 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r255591 | tilghman | 2010-03-31 14:09:46 -0500 (Wed, 31 Mar 2010) | 15 lines
Ensure line terminators in email are consistent.
Fixes an issue with certain Mail Transport Agents, where attachments are not
interpreted correctly.
(closes issue #16557)
Reported by: jcovert
Patches:
20100308__issue16557__1.4.diff.txt uploaded by tilghman (license 14)
20100308__issue16557__1.6.0.diff.txt uploaded by tilghman (license 14)
20100308__issue16557__trunk.diff.txt uploaded by tilghman (license 14)
Tested by: ebroad, zktech
Reviewboard: https://reviewboard.asterisk.org/r/544/
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@255592 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Previously only configurable globally. A unit test has also been written to
provide protection against parse failures for supported mailbox options.
(closes issue #16864)
Reported by: kobaz
Patches:
voicemail2.patch uploaded by kobaz (license 834)
Review: https://reviewboard.asterisk.org/r/555/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@254321 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Change the example usage of pipe as a separator to comma in the UserEvent
documentation.
(closes issue #16961)
Reported by: jlpedrosa
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@253345 65c4cc65-6c06-0410-ace0-fbb531ad65f3
