It was a mess. The first part of chan_sip.c is constants, declarations, structures and stuff,
then forward declarations and then actual code. It's still a mess, but a bit less messy ;-)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@377018 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The principal behind this patch is simple. During a transfer,
we manipulate channels that are owned by a separate thread than
the one we currently are running in, so it makes sense that we
need to grab a reference to the channels so that they cannot
disappear out from under us.
In the wild, crashes were sometimes seen when the transferring
party would hang up the call before the transfer target answered
the call. The most common place to see the crash occur was when
attempting to send a connected line update to the transferer
channel.
(closes issue ASTERISK-20226)
Reported by Jared Smith
Patches:
ASTERISK-20226.patch uploaded by Mark Michelson (License #5049)
Tested by: Jared Smith
........
Merged revisions 376901 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 376916 from http://svn.asterisk.org/svn/asterisk/branches/10
........
Merged revisions 376917 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@376918 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Websocket by default doesn't return an ast_str for the payload received. When
converting it to an ast_str on chan_sip the last character was being omitted,
because ast_str functions expects that the given length includes the trailing
0x00. payload_len only has the actual string length without counting the
trailing zero.
For most cases this passed unnoticed as most of SIP messages ends with \r\n.
(closes issue ASTERISK-20745)
Reported by: Iñaki Baz Castillo
Review: https://reviewboard.asterisk.org/r/2219/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@376820 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Asterisk 11 follows RFC3265 that states that after every subscribe or resubscribe a notify should be sent.
Thus the console if filled continuously with the following after every subscribe;
== Extension Changed 8512[phones] new state IDLE for Notify User cisco1
In Asterisk 1.8 only changes would be sent. Thus only when a device state changed was anything emitted to the console.
fix:
Only print to console when device state isn't forced.
(closes issue ASTERISK-20706)
Reported by: alecdavis
Tested by: alecdavis
alecdavis (license 585)
........
Merged revisions 376540 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@376541 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The new field is will show up within the response if the requested peer has a
subscribe context set.
(closes issue ASTERISK-20626)
Reported by: Jaco Kroon
Patches:
asterisk-sip-ami-SubscrContext.patch uploaded by jkroon (license 5671)
-with modifications by jrose to conform to style guidelines
Review: https://reviewboard.asterisk.org/r/2195/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@376219 65c4cc65-6c06-0410-ace0-fbb531ad65f3
With ICE support enabled in chan_sip and a large number of interfaces on the system it was
possible for the produced SDP to be truncated due to some fixed size buffers. These buffers
have now been changed so they will dynamically grow as needed.
ICE support is now also enabled by default in res_rtp_asterisk to provide a smoother experience
for chan_motif users where it is required. To maintain the previous behavior in chan_sip it is
no longer enabled by default there.
(closes issue ASTERISK-20643)
Reported by: coopvr
........
Merged revisions 376130 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@376131 65c4cc65-6c06-0410-ace0-fbb531ad65f3
While looking at some debug logs, I noticed that it was being reported that the
SDP origin line was unsupported or failed. Upon looking into this on my local
machine, I found that I too was getting this debug message yet everything seemed
to be getting processed properly. What was discovered is, that, the variable to
determine what is displayed in the debug message for the SDP line that was
processed, was not being set for the origin line when the result was successful.
This patch fixes this and was tested on local machine.
........
Merged revisions 375594 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 375601 from http://svn.asterisk.org/svn/asterisk/branches/10
........
Merged revisions 375613 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@375614 65c4cc65-6c06-0410-ace0-fbb531ad65f3
A regression was introduced in chan_sip by changes to sip reload introduced by
r349097. That patch moved peer purging from the beginning of the reload to
after the general configuration was finished. This patch fixes that by undoing
the repositioning of the original peer purging code and using a similar
function after performing general configuration that purges only autocreated
peers that were created when persist mode isn't enabled.
(closes issue ASTERISK-20611)
Reported by: Alisher
Review: https://reviewboard.asterisk.org/r/2171/
........
Merged revisions 375575 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@375576 65c4cc65-6c06-0410-ace0-fbb531ad65f3
If a "sip reload" is issued for a SIP peer, then his
IP address will be cleared, thus resulting in forgetting the
public IP address. Asterisk will then attempt to route SIP
traffic to the private IP address.
The fix here is to make "sip reload" ignore realtime peers
when "host = dynamic" is spotted. Realtime peers can now only
have their IP address reset if they have gone from being not
dynamic to being dynamic.
(closes issue ASTERISK-18203)
reported by daren ferreira
(closes issue ASTERISK-20572)
reported by JoshE
Patches:
fix_nat_realtime.diff uploaded by JoshE (license #6075)
........
Merged revisions 375415 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 375417 from http://svn.asterisk.org/svn/asterisk/branches/10
........
Merged revisions 375437 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@375443 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Remove the "RTP Read too short" warning for RTP keepalives. Remove the
the warning about the application delimiter switch from pipe to comma.
(You should've done this by now.) Make cdr_odbc report more when an
insert fails. Make chan_sip warn less when the peer wants SRTP (and we
don't) or sends a zero port to disable a media type.
Review: https://reviewboard.asterisk.org/r/2167
(closes issue ASTERISK-20538)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@375137 65c4cc65-6c06-0410-ace0-fbb531ad65f3
In many cases (for peers behind NAT or for TCP sockets) we do not need
to look up any hostname in the Contact (or Route) when sending an
in-dialog request. This should reduce netsock2.c: getaddrinfo errors in
certain scenarios.
Review: https://reviewboard.asterisk.org/r/2156
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@375110 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Update and extend the configuration_file group and enable linking. Update title that was left behind many years ago.
(issue ASTERISK-20259)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@375006 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This is used to solve an issue where a poll on a file
descriptor does not necessarily correspond to the readiness
of a FILE handle to be read.
This change makes it so that for TCP connections, we do a
recv() on the file descriptor instead.
Because TCP does not guarantee that an entire message or even
just one single message will arrive during a read, a loop has
been introduced to ensure that we only attempt to handle a
single message at a time. The tcptls_session_instance structure
has also had an overflow buffer added to it so that if more
than one TCP message arrives in one go, there is a place to
throw the excess.
Huge thanks goes out to Walter Doekes for doing extensive review
on this change and finding edge cases where code could fail.
(closes issue ASTERISK-20212)
reported by Phil Ciccone
Review: https://reviewboard.asterisk.org/r/2123
........
Merged revisions 374905 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 374906 from http://svn.asterisk.org/svn/asterisk/branches/10
........
Merged revisions 374914 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@374924 65c4cc65-6c06-0410-ace0-fbb531ad65f3
During testing, it was discovered that having chan_sip
export global symbols was problematic.
The biggest problem was that load order was affected.
Trying to use realtime could be problematic since in
all likelihood the necessary realtime driver(s) would
not be loaded before chan_sip.
In addition, it was found that it was impossible to
use the Digium Phone Module for Asterisk since it
must be loaded before chan_sip since it must hook
into chan_sip's configuration parsing.
The solution is to use a virtual table in the same
manner that other modules in Asterisk do, like
app_voicemail.
(closes issue ASTERISK-20545)
Reported by: kmoore
........
Merged revisions 374842 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@374849 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This allows for the REDIRECTING dialplan function to be
used to set the reason to any string.
The SIP channel driver has been modified to set the redirecting
reason string to the value received in a Diversion header. In
addition, SIP 480 response reason text will set the redirecting
reason as well.
(closes issue AST-942)
reported by Malcolm Davenport
(closes issue AST-943)
reported by Malcolm Davenport
Review: https://reviewboard.asterisk.org/r/2101
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@373701 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The SIP session timer mechanism contains a mandatory 'refresher' parameter
(included in the Session-Expires header) which is used in the session timer
offer/answer signaling within a SIP Invite dialog. It looks like asterisk is
interpreting the uac resp. uas role only as the initial role of client and
server (caller is uac, callee is uas). The standard rfc 4028 however assigns
the client role to the ((RE)-Invite) requester, the server role to the
((RE)-Invite) responder.
This patch has Asterisk track the actual refresher as "us" or "them" as opposed
to relying on just the configured "uas" or "uac" properties.
(closes issue AST-922)
Reported by: Thomas Airmont
Review: https://reviewboard.asterisk.org/r/2118/
........
Merged revisions 373652 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 373665 from http://svn.asterisk.org/svn/asterisk/branches/10
........
Merged revisions 373690 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@373691 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When setting CALLERID(pres)=unavailable in the dialplan, the From header
in the SIP message contains "Anonymous" <sip:Anonymous@anonymous.invalid>.
For consistency, Asterisk should use a lowercase a in the userpart of the
URI.
* Make the From header use a lowercase A in the userpart of the anonymous
URI.
(closes issue ASTERISK-19838)
Reported by: Antti Yrjola
Patches:
chan_sip_patch_ASTERISK-19838.patch (license #6383) patch uploaded by Antti Yrjola
........
Merged revisions 373500 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 373501 from http://svn.asterisk.org/svn/asterisk/branches/10
........
Merged revisions 373502 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@373503 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Asterisk v1.8 and later was not as vulnerable to this issue.
* Made find_call() lock each private as it processes the found dialogs.
(Primary cause of ABE-2876)
* Made the other functions that traverse the dialogs container lock each
private as it examines them.
* Fix race condition in sip_call() if the thread that sent the INVITE is
held up long enough for a response to be processed. The p->initid for the
INVITE retransmission could be added after it was canceled by the response
processing.
* Made __sip_destroy() clean up resource pointers after freeing. This is
primarily defensive in case someone has a stale private pointer.
* Removed redundant memset() in reqprep(). The call to init_req() already
does the memset() and is the first reference to req in reqprep().
* Removed useless set of req.method in transmit_invite(). The calls to
initreqprep() and reqprep() have to do this because they memset() the req.
JIRA ABE-2876
..........
Merged -r373423 from https://origsvn.digium.com/svn/asterisk/be/branches/C.3-bier
........
Merged revisions 373424 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 373466 from http://svn.asterisk.org/svn/asterisk/branches/10
........
Merged revisions 373469 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@373471 65c4cc65-6c06-0410-ace0-fbb531ad65f3
If conditions were right it was possible for both the PBX core and chan_sip to deadlock by both having a lock that the other
wants. In the case of the PBX core it had the contexts lock and wanted a SIP dialog lock, while in the case of chan_sip it
had the SIP dialog lock and wanted the contexts lock.
This fix unlocks the SIP dialog before getting the extension state so that the other thread will not block on trying to lock
it. Once the extension state is retrieved the SIP dialog is locked again and life carries on.
As the SIP dialog is reference counted it is not possible for it to go away after unlocking.
(closes issue ASTERISK-20437)
Reported by: jhutchins
........
Merged revisions 373438 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 373440 from http://svn.asterisk.org/svn/asterisk/branches/10
........
Merged revisions 373454 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@373456 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The H.264 format attribute module compares two format attribute structures to determine if they are
compatible or not. In some instances it was possible for this check to determine that both structures
were incompatible when they actually should be considered compatible. This check has now been made even
more permissive by assuming that if no attribute information is available the two structures are compatible.
If both structures contain attribute information a base level comparison of the H.264 IDC value is done to
see if they are compatible or not.
The above issue uncovered a secondary issue in chan_sip where the SDP being produced would be incorrect if
the formats were considered incompatible. This has now been fixed by checking that all information required
to produce the SDP is available instead of assuming it is.
(closes issue ASTERISK-20464)
Reported by: Leif Madsen
........
Merged revisions 373413 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@373414 65c4cc65-6c06-0410-ace0-fbb531ad65f3
* Whitespace, doc-blocks, spelling, case, missing and incorrect tags.
* Add cleanup to Makefile for the Doxygen configuration update
* Start updating Doxygen configuration for cleaner output
* Enable inclusion of configuration files into documentation
* remove mantisworkflow...
* update documentation README
* Add markup to Tilghman's email and talk with him about updating his email, he knows...
* no code changes on this commit other than the mentioned Makefile change
(issue ASTERISK-20259)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@373384 65c4cc65-6c06-0410-ace0-fbb531ad65f3
As mentioned on the review for this, WebRTC has moved towards choosing
DTLS-SRTP as the mechanism for key exchange for SRTP. This commit adds
support for this but makes it available for normal SIP clients as well.
Testing has been done to ensure that this introduces no regressions with
existing behavior and also that it functions as expected.
Review: https://reviewboard.asterisk.org/r/2113/
........
Merged revisions 373229 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@373234 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When the patch to handle arbitrary SDP stream arrangements went into
Asterisk, it also included an ability to transparently decline unknown
stream types. The scanf calls used were not checked properly causing
this part of the functionality to be broken.
(closes issue ASTERISK-20203)
........
Merged revisions 373211 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@373212 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch resolves two sources of memory leaks when using TLS in Asterisk:
1) It removes improper initialization (and multiple re-initializations) of
portions of the SSL library. Asterisk calls SSL_library_init and
SSL_load_error_strings during SSL initialization; collectively this
obviates the need for calling any of the following during initialization
or client connection handling:
* ERR_load_crypto_strings (handled by SSL_load_error_strings)
* OpenSSL_add_all_algorithms (synonym for SSL_library_init)
* SSLeay_add_ssl_algorithms (synonym for SSL_library_init)
2) Failure to completely clean up all memory allocated by Asterisk and by
the SSL library for TLS clients. This included not freeing the SSL_CTX
object in the SIP channel driver, as well as not clearing the error
stack when the TLS client exited.
Note that these memory leaks were found by Thomas Arimont, and this patch
was essentially written by him with some minor tweaks.
(closes issue AST-889)
Reported by: Thomas Arimont
Tested by: Thomas Arimont
patches:
(bugAST-889.patch) by Thomas Arimont (license 5525)
Review: https://reviewboard.asterisk.org/r/2105
........
Merged revisions 373061 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 373062 from http://svn.asterisk.org/svn/asterisk/branches/10
........
Merged revisions 373079 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@373080 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Prior to this patch, The acknowledgement wasn't produced until after
executing the sip_poke_peer action actually responsible for
qualifying the peer. Now the response is given immediately once it is
known that a peer will be qualified and a SIPqualifypeerdone event
is issued when the process is finished. Thanks to OEJ for identifying
the problem and helping to come up with a solution.
(issue AST-969)
Reported by John Bigelow
Review: https://reviewboard.asterisk.org/r/2098/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@372808 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Prior to 1.8, it was not necessary for an explicit "type" to be set for an
asterisk LDAP realtime peer. Now the routine find_peer actually checks the
type field during registration and fails to find the peer if it is not set.
The attached patch makes the realtime type equal whatever type is being
searched for if the type is 0 upon return from routine build_peer.
(closes issue ASTERISK-17222)
Reported by: John Covert
Patch by: David Vossel
Tested by: Darren Sessions
Review: https://reviewboard.asterisk.org/r/2095/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@372290 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The problem had to do with logic used when checking for what the oldest ringing channel
was. The problem was that if no channel was found, then no notification would be sent.
For custom device states, there is no associated channel, so no notification would get
sent. This fixes the issue by still sending the notification even if no associated
channel can be found for a ringing device state change.
(closes issue ASTERISK-20297)
Reported by Noah Engelberth
........
Merged revisions 372137 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@372138 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch fixes numerous doxygen warnings across Asterisk. It also updates
the makefile to regenerate the doxygen configuration on the local system
before running doxygen to help prevent warnings/errors on the local system.
Much thanks to Andrew for tackling one of the Asterisk janitor projects!
(issue ASTERISK-20259)
Reported by: Andrew Latham
Patches:
doxygen_partial.diff uploaded by Andrew Latham (license 5985)
make_progdocs.diff uploaded by Andrew Latham (license 5985)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@371989 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Matt Jordan informed me that it was more appropriate to use an
astman_send_ack here instead of making an event response. I've also
used this opportunity to update UPGRADE.txt to mention this change
in behavior.
(issue AST-969)
Reported by: John Bigelow
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@371889 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Prior to this patch, Issuing SIPqualifypeer either resulted in an
error or if it succeeded, a few \r\ns. This patch adds a
SIPqualifypeerComplete event issued as a response when the command
is successfully executed.
(closes issue AST-969)
Reported by: John Bigelow
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@371823 65c4cc65-6c06-0410-ace0-fbb531ad65f3
