https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r305247 | qwell | 2011-01-31 16:25:23 -0600 (Mon, 31 Jan 2011) | 7 lines
Add alternative name for config option.
The SIP sample configuration had "tlscadir" as the option name, but chan_sip
used the more correct "tlscapath". Now both are accepted.
Discovered (sort of) by a user on IRC in #asterisk
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@305248 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This adds a generic API for accommodating IPv6 and IPv4 addresses
within Asterisk. While many files have been updated to make use of the
API, chan_sip and the RTP code are the files which actually support
IPv6 addresses at the time of this commit. The way has been paved for
easier upgrading for other files in the near future, though.
Big thanks go to Simon Perrault, Marc Blanchet, and Jean-Philippe Dionne
for their hard work on this.
(closes issue #17565)
Reported by: russell
Patches:
asteriskv6-test-report.pdf uploaded by russell (license 2)
Review: https://reviewboard.asterisk.org/r/743
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@274783 65c4cc65-6c06-0410-ace0-fbb531ad65f3
What this patch fixes
1.Moves sip TCP/TLS connection setup into the TCP helper thread:
Connection setup takes awhile and before this it was being
done while holding the monitor lock.
2.Moves TCP/TLS writing to the TCP helper thread: Through the
use of a packet queue and an alert pipe, the TCP helper thread
can now be woken up to write data as well as read data.
3.Locking error: sip_xmit returned an XMIT_ERROR without giving
up the tcptls_session lock. This lock has been completely removed
from sip_xmit and placed in the new sip_tcptls_write() function.
4.Memory leak: When creating a tcptls_client the tls_cfg was alloced
but never freed unless the tcptls_session failed to start. Now the
session_args for a sip client are an ao2 object which frees the
tls_cfg on destruction.
5.Pointer to stack variable: During sip_prepare_socket the creation
of a client's ast_tcptls_session_args was done on the stack and
stored as a pointer in the newly created tcptls_session. Depending
on the events that followed, there was a slight possibility that
pointer could have been accessed after the stack returned. Given
the new changes, it is always accessed after the stack returns
which is why I found it.
Notable code changes
1.I broke tcptls.c's ast_tcptls_client_start() function into two
functions. One for creating and allocating the new tcptls_session,
and a separate one for starting and handling the new connection.
This allowed me to create the tcptls_session, launch the helper
thread, and then establish the connection within the helper thread.
2.Writes to a tcptls_session are now done within the helper thread.
This is done by using an alert pipe to wake up the thread if new
data needs to be sent. The thread's sip_threadinfo object contains
the alert pipe as well as the packet queue.
3.Since the threadinfo object contains the alert pipe, it must now be
accessed outside of the helper thread for every write (queuing of a
packet). For easy lookup, I moved the threadinfo objects from a
linked list to an ao2_container.
(closes issue #13136)
Reported by: pabelanger
Tested by: dvossel, whys
(closes issue #15894)
Reported by: dvossel
Tested by: dvossel
Review: https://reviewboard.asterisk.org/r/380/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@225445 65c4cc65-6c06-0410-ace0-fbb531ad65f3
chan_sip allows for outbound TLS connections, but does not allow the user to specify what protocol to use (default was SSLv2, and still is if this new option is not specified). This patch lets the user pick the SSL/TLS client method for outbound connections in sip.
(closes issue #14770)
Reported by: TheOldSaint
(closes issue #14768)
Reported by: TheOldSaint
Review: http://reviewboard.digium.com/r/240/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@191177 65c4cc65-6c06-0410-ace0-fbb531ad65f3
ast_tls_read_conf() is a new api call for handling SSL/TLS options across all conf files. Before this change, SSL/TLS options were not consistent. http.conf and manager.conf required the 'ssl' prefix while sip.conf used options with the 'tls' prefix. While the options had different names in different conf files, they all did the exact same thing. Now, instead of mixing 'ssl' or 'tls' prefixes to do the same thing depending on what conf file you're in, all SSL/TLS options use the 'tls' prefix. For example. 'sslenable' in http.conf and manager.conf is now 'tlsenable' which matches what already existed in sip.conf. Since this has the potential to break backwards compatibility, previous options containing the 'ssl' prefix still work, but they are no longer documented in the sample.conf files. The change is noted in the CHANGES file though.
Review: http://reviewboard.digium.com/r/237/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@191028 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Adds option to specify a private key .pem file when configuring TLS or SSL in AMI, HTTP, and SIP. Before this, the certificate file was used for both the public and private key. It is possible for this file to hold both, but most configurations allow for a separate private key file to be specified. Clarified in .conf files how these options are to be used. The current conf files do not explain how the private key is handled at all, so without knowledge of Asterisk's TLS implementation, it would be hard to know for sure what was going on or how to set it up.
Review: http://reviewboard.digium.com/r/234/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@190545 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Copied from my review board description:
This is a continuation of the API changes documentation started for describing
changes between releases. Most of the API changes were pretty simple needing
only to be brought to attention via the new "Asterisk API Changes" list.
However, if you see anything that needs further explanation feel free to
supplement what is there. The current method of documenting is to add (in the
header file): \version <ver number> <description of changes> and then to add
the function to the change list in doxyref.h on the AstAPIChanges page. I also
made sure all the functions that were newly added were tagged with \since
1.6.1. I think this is a good habit to start both for the historical aspect as
well as for the future ability to easily add a "New Asterisk API" page.
Review: http://reviewboard.digium.com/r/190/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@180719 65c4cc65-6c06-0410-ace0-fbb531ad65f3
an fseek() on the stream, which is an invalid operation for a socket. Turning
off buffering explicitly lets the stdio functions know they cannot do this,
thus avoiding a potential error.
(closes issue #14400)
Reported by: fnordian
Patches:
tcptls.patch uploaded by fnordian (license 110)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@173458 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch fixes a problem that caused chan_sip to think that every open TCP session
was to a remote address of 0.0.0.0:0.
(closes issue #14287)
Reported by: jamesgolovich
Patches:
bug-14287.diff.txt uploaded by jamesgolovich (license 176)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@169620 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The name "ser" was used in a lot of places. However, it is a relic from when
the struct was a server_instance, not a session_instance. It was renamed since
it represents both a server or client connection.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@163670 65c4cc65-6c06-0410-ace0-fbb531ad65f3
1) rename 'struct server_args' to 'struct ast_tcptls_session_args', to follow coding guidelines
2) make ast_make_file_from_fd() static and rename it to something that indicates what it really is for (again coding guidelines)
3) rename address variables inside 'struct ast_tcptls_session_args' to be more descriptive (dare i say it... coding guidelines)
4) change ast_tcptls_client_start() to use the new 'remote_address' field of the session args for the destination of the connection, and use the 'local_address' field to bind() the socket to the proper source address, if one is supplied
5) in chan_sip, ensure that we pass in the PP address we are bound to when creating outbound (client) connections, so that our connections will appear from the correct address
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@151101 65c4cc65-6c06-0410-ace0-fbb531ad65f3
them, and memory does not get free'd causing strange issues with SIP.
This code was originally written by russellb in the team/group/issue_11972/ branch.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@123546 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This set of changes introduces TCP and TLS support for chan_sip. There are various
new options in configs/sip.conf.sample that are used to enable these features. Also,
there is a document, doc/siptls.txt that describes some things in more detail.
This code was implemented by Brett Bryant and James Golovich. It was reviewed
by Joshua Colp and myself. A number of other people participated in the testing
of this code, but since it was done outside of the bug tracker, I do not have their
names. If you were one of them, thanks a lot for the help!
(closes issue #4903, but with completely different code that what exists there.)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@99085 65c4cc65-6c06-0410-ace0-fbb531ad65f3