https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r222797 | rmudgett | 2009-10-08 11:33:06 -0500 (Thu, 08 Oct 2009) | 12 lines
Fix memory leak if chan_misdn config parameter is repeated.
Memory leak when the same config option is set more than once in an
misdn.conf section. Why must this be considered? Templates! Defining a
template with default port options and later adding to or overriding some
of them.
Patches:
memleak-misdn.patch
JIRA ABE-1998
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@222799 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Channels are stored in an ao2_container. When accessing an item within
an ao2_container the proper locking order is to first lock the container,
and then the items within it.
In ast_do_masquerade both the clone and original channel must be locked
for the entire duration of the function. The problem with this is that
it attemptes to unlink and link these channels back into the ao2_container
when one of the channel's name changes. This is invalid locking order as
the process of unlinking and linking will lock the ao2_container while
the channels are locked!!! Now, both the channels in do_masquerade are
unlinked from the ao2_container and then locked for the entire function.
At the end of the function both channels are unlocked and linked back
into the container with their new names as hash values.
This new method of requiring all channels and tech pvts to be unlocked
before ast_do_masquerade() or ast_change_name() required several
changes throughout the code base.
(closes issue #15911)
Reported by: russell
Patches:
masq_deadlock_trunk.diff uploaded by dvossel (license 671)
Tested by: dvossel, atis
(closes issue #15618)
Reported by: lmsteffan
Patches:
deadlock_local_attended_transfers_trunk.diff uploaded by dvossel (license 671)
Tested by: lmsteffan, dvossel
Review: https://reviewboard.asterisk.org/r/387/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@222761 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r222691 | rmudgett | 2009-10-07 16:51:24 -0500 (Wed, 07 Oct 2009) | 14 lines
chan_misdn.c:process_ast_dsp() memory leak
misdn.conf: astdtmf must be set to "yes". With "no", buffer loss does not
occur.
The translated frame "f2" when passing through ast_dsp_process() is not
freed whenever it is not used further in process_ast_dsp(). Then in the
end it is never ever freed.
Patches:
translate.patch
JIRA ABE-1993
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@222692 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch adds support for TCP/TLS in the Contact header when using
NAT, specifically externip or externhost. The original issue was that
Asterisk sent 5060 as the port in the contact header whether TLS was
used or not. Additionally, this patch adds 2 config options to sip.conf,
specifically externtcpport and externtlsport. This allows a user to
specify different external ports for TCP and TLS other than those used
internally, this is especially useful in in a PAT/port redirection setup.
Thanks to ebroad for reporting the issue and providing the patch!
(closes issue #15880)
Reported by: ebroad
Patches:
portmap.patch uploaded by ebroad (license 878)
externtXXport_v2.patch uploaded by ebroad (license 878)
Tested by: ebroad
Review: https://reviewboard.asterisk.org/r/392/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@222398 65c4cc65-6c06-0410-ace0-fbb531ad65f3
........
r222393 | jpeeler | 2009-10-06 17:27:13 -0500 (Tue, 06 Oct 2009) | 11 lines
Fix potential crash when entire span request is received.
The variable index used in this scenario for accessing the dahdi_pvts was
wrong and was most likely copied from the several other places it is used
correctly.
(closes issue #15998)
Reported by: tsearle
Patches:
dahdi_reset_crash.patch uploaded by tsearle (license 373)
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@222394 65c4cc65-6c06-0410-ace0-fbb531ad65f3
setvar).
I mistakenly reasoned that setvar would be used on all channels. Since it can
be set per channel, give each dahdi channel a copy of the variable.
(related to #15899)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@222351 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This change is done in such a way as to allow the driver to continue to
function with older databases which don't have these features.
(closes issue #16000)
Reported by: jamicque
Patches:
20091002__issue16000.diff.txt uploaded by tilghman (license 14)
20091002__issue16000__1.6.1.diff.txt uploaded by tilghman (license 14)
Tested by: jamicque
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@222309 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The setvar line in chan_dahdi.conf is shared among all the channels, so make
sure to only free the resources only when the last channel is destroyed.
(closes issue #15899)
Reported by: tzafrir
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@222298 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This affected the ~~EXTEN~~ hack, where a subroutine might have changed the
value before it was used in the caller.
Patch by myself, tested by ebroad on #asterisk
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@222273 65c4cc65-6c06-0410-ace0-fbb531ad65f3
dahdievent_to_analogevent used a simple switch statement to convert DAHDI
event numbers to "ANALOG_*" event numbers. However "digit" events
(DAHDI_EVENT_PULSEDIGIT, DAHDI_EVENT_DTMFDOWN, DAHDI_EVENT_DTMFUP)
are accompannied by the digit in the low word of the event number.
This fix makes dahdievent_to_analogevent() return the event number as-is
for such an event.
This is also required to fix#15924 (in addition to r222108).
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@222237 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r222152 | kpfleming | 2009-10-05 20:16:36 -0500 (Mon, 05 Oct 2009) | 20 lines
Fix ao2_iterator API to hold references to containers being iterated.
See Mantis issue for details of what prompted this change.
Additional notes:
This patch changes the ao2_iterator API in two ways: F_AO2I_DONTLOCK
has become an enum instead of a macro, with a name that fits our
naming policy; also, it is now necessary to call
ao2_iterator_destroy() on any iterator that has been
created. Currently this only releases the reference to the container
being iterated, but in the future this could also release other
resources used by the iterator, if the iterator implementation changes
to use additional resources.
(closes issue #15987)
Reported by: kpfleming
Review: https://reviewboard.asterisk.org/r/383/
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@222176 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Many T.38 endpoints incorrectly send the maximum IFP frame size they can accept
as the T38FaxMaxDatagram value in their SDP, when in fact this value is
supposed to be the maximum UDPTL payload size (datagram size) they can accept.
If the value they supply is small enough (a commonly supplied value is '72'),
T.38 UDPTL transmissions will likely fail completely because the UDPTL packets
will not have enough room for a primary IFP frame and the redundancy used for
error correction. If this occurs, the Asterisk UDPTL stack will emit log messages
warning that data loss may occur, and that the value may need to be overridden.
This patch extends the 't38pt_udptl' configuration option in sip.conf to allow
the administrator to override the value supplied by the remote endpoint and
supply a value that allows T.38 FAX transmissions to be successful with that
endpoint. In addition, in any SIP call where the override takes effect, a debug
message will be printed to that effect. This patch also removes the
T38FaxMaxDatagram configuration option from udptl.conf.sample, since it has not
actually had any effect for a number of releases.
In addition, this patch cleans up the T.38 documentation in sip.conf.sample
(which incorrectly documented that T.38 support was passthrough only).
(issue #15586)
Reported by: globalnetinc
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@222110 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The reported bug was actually only for pulsedigit, dtmfup, and dtmfdown
handling. Also added recognition for fax events (just some verbose output) and
fixed handling for the ec_disabled_event. In order to make comparing the analog
version of events to the DAHDI events easier, the ordering has been changed to
follow that of the DAHDI events.
(closes issue #15924)
Reported by: tzafrir
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@222108 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r221769 | rmudgett | 2009-10-01 18:18:28 -0500 (Thu, 01 Oct 2009) | 26 lines
Occasionally losing use of B channels in chan_misdn.
I have not been able to reproduce the problem of losing channels.
However, I have seen in the code a reentrancy problem that might give
these symptoms.
The reentrancy patch does several things:
1) Guards B channel and B channel structure allocation.
2) Makes the B channel structure find routines more precise in locating records.
3) Never leave a B channel allocated if we received cause 44.
The last item may cause temporary outgoing call problems, but they should
clear when the line becomes idle.
(closes issue #15490)
Reported by: slutec18
Patches:
issue15490_channel_alloc_reentrancy.patch uploaded by rmudgett (license 664)
Tested by: rmudgett, slutec18
(closes issue #15458)
Reported by: FabienToune
Patches:
issue15458_channel_alloc_reentrancy.patch uploaded by rmudgett (license 664)
Tested by: FabienToune, rmudgett, slutec18
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@221844 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The PRI channels can no longer change the channel name if a different B
channel is selected during call negotiation. To prevent using the channel
name to infer what B channel a call is using and to avoid name collisions,
the channel name format is changed.
The new channel naming for PRI channels is:
DAHDI/ISDN-<span>-<sequence-number>
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@221701 65c4cc65-6c06-0410-ace0-fbb531ad65f3
chan_sip has had the ability to control T.38 FAX error correction mode on a per-peer
(or global) basis for a couple of releases now, which is where it should have been
all along. This patch removes the ability to configure it in udptl.conf, but issues
a warning if the user tries to do, telling them to look at sip.conf.sample for how
to configure it now. For any SIP peers that are T.38 enabled in sip.conf, there is
already a default for FEC error correction even if the user does not specify any mode,
so this change will not turn off error correction by default, it will have the same
default value that has been in the udptl.conf sample file.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@221592 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r221360 | mnicholson | 2009-09-30 14:36:06 -0500 (Wed, 30 Sep 2009) | 10 lines
Fix SRV lookup and Request-URI generation in chan_sip.
This patch adds a new field "portinuri" to the sip dialog struct and the sip peer struct. That field is used during RURI generation to determine if the port should be included in the RURI. It is also used in some places to determine if an SRV lookup should occur.
(closes issue #14418)
Reported by: klaus3000
Tested by: klaus3000, mnicholson
Review: https://reviewboard.asterisk.org/r/369/
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@221432 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r221086 | twilson | 2009-09-30 09:49:11 -0500 (Wed, 30 Sep 2009) | 25 lines
Change the SSRC by default when our media stream changes
Be default, change SSRC when doing an audio stream changes Asterisk doesn't
honor marker bit when reinvited to already-bridged RTP streams,resulting in
far-end stack discarding packets with "old" timestamps that areactually part of
a new stream. This patch sends AST_CONTROL_SRCUPDATE whenever there is a
reinvite, unless the 'constantssrc' is set to true in sip.conf.
The original issue reported to Digium support detailed the following situation:
ITSP <-> Asterisk 1.4.26.2 <-> SIP-based Application Server Call comes in
fromITSP, Asterisk dials the app server which sends a re-invite back
toAsterisk--not to negotiate to send media directly to the ITSP, but to
indicatethat it's changing the stream it's sending to Asterisk. The app
servergenerates a new SSRC, sequence numbers, timestamps, and sets the marker
bit on the new stream. Asterisk passes through the teimstamp of the new stream,
butdoes not reset the SSRC, sequence numbers, or set the marker bit.
When the timestamp on the new stream is older than the timestamp on the
originalstream, the ITSP (which doesn't know there has been any change) discards
the newframes because it thinks they are too old. This patch addresses this by
changing the SSRC on a stream update unless constantssrc=true is set in
sip.conf.
Review: https://reviewboard.asterisk.org/r/374/
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@221266 65c4cc65-6c06-0410-ace0-fbb531ad65f3
ast_cel_report_event would geet a reference to the
bridged channel. However, certain return paths, such
as if CEL was not enabled, would result in a reference
leak. All return paths now properly unref the channel.
(closes issue #15991)
Reported by: mmichelson
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@220995 65c4cc65-6c06-0410-ace0-fbb531ad65f3
........
r220907 | mnicholson | 2009-09-29 15:14:29 -0500 (Tue, 29 Sep 2009) | 10 lines
Avoid a deadlock in chanspy, just in case the spyee is masqueraded and chanspy_ds_chan_fixup() is called with the channel locked.
(closes issue #15965)
Reported by: atis
Patches:
chanspy-deadlock-fix1.diff uploaded by mnicholson (license 96)
Tested by: atis
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@220928 65c4cc65-6c06-0410-ace0-fbb531ad65f3