Let's try that again, this time removing trailing whitespace and not leading
whitespace. I can't believe no one noticed.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@197535 65c4cc65-6c06-0410-ace0-fbb531ad65f3
In sip.conf the transport option allows for the configuration of what transport types (udp, tcp, and tls) a peer will accept, but only the first type listed was used for outbound connections. This patch changes this. Now the default transport type is only used until the peer registers. When registration takes place the transport type is parsed out of the Contact header. If the Contact header's transport type is equal to one that the peer supports, the peer's default transport type for outbound connections is set to match the Contact header's type. If the Contact header's transport type is not present, then the peer's default transport type is set to match the one the peer registered with. When a peer unregisters or the registration expires, the default transport type for that peer is reset.
(closes issue #12282)
Reported by: rjain
Patches:
reg_patch_1.diff uploaded by dvossel (license 671)
Tested by: dvossel
(closes issue #14727)
Reported by: pj
Patches:
reg_patch_3.diff uploaded by dvossel (license 671)
Tested by: pj, dvossel
Review: https://reviewboard.asterisk.org/r/249/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@196416 65c4cc65-6c06-0410-ace0-fbb531ad65f3
SIP purists may want to look the other way...
When COLP/CONP support for SIP was committed, there was a condition under
which Asterisk may transmit a SIP UPDATE in order to communicate the change
in connected line information. The issue here is that while we could send a
SIP UPDATE message, we were not prepared to receive such an UPDATE and would
always responde with a 501 when we received an UPDATE.
The situation was a bit rough. We really want to be able to receive UPDATEs
having to do with connected line changes, but the amount of effort involved
in properly supporting RFC 3311 was staggering. This commit represents a
compromise.
First, it was decided that it is important to only send a SIP UPDATE to
an endpoint that is able to handle one. So, now we have added parsing of
the Allow header into SIP. We store the allowed methods on SIP peers so
that when we communicate with them, we already will know what we can and
cannot send to them. We will parse the peer's allowed methods when he registers
with us. If the peer is not the type to register with us, but the qualify option
is enabled, then we will use the response to the OPTIONS request we send
the peer to determine the peer's allowed methods. When the peer's registration
expires, or when qualify deems the peer to be unreachable, we clear the allowed
methods from the peer.
For an actual call, we will copy the peer's allowed methods to the sip_pvt
representing the call leg. If we are communicating with an endpoint which is
not a peer, then we will just parse the Allow header from the first message
we receive during the call and store the information in the sip_pvt.
If, during communication with a peer, we receive a 501 response, then we will
make sure to save the fact that we cannot use that method when communicating
with that peer.
Now, with all that infrastructure in place, the only actual place we use this
information currently is when attempting to send a connected line change using
an UPDATE request. If we cannot send the change immediately using an UPDATE,
we will set the SIP_NEEDREINVITE flag so that we can send a REINVITE as soon
as it is allowed.
The second part of the changes here is for Asterisk to accept UPDATE requests
that have connected line changes. Since we are not fully supporting RFC 3311,
Asterisk will NOT place the UPDATE method in Allow headers it sends. Instead,
if you are communicating with what you know to be another Asterisk box, you may
set the rpid_update parameter in sip.conf so that we will send UPDATEs to that
Asterisk box. When we send a connected line update, we set a custom header
called "X-Asterisk-rpid-update."
On the receiving end, if Asterisk receives an UPDATE that does not have the
"X-Asterisk-rpid-update" header present, then Asterisk will respond with a 501
since media-changing UPDATEs are not supported. We should never get such
UPDATEs, since as was stated earlier, Asterisk does not put UPDATE in its Allow
header. If the custom header is present in the received UPDATE, though, then we
will check the incoming request for connected line updates and queue the update
on the channel where the change occurred.
ABE-1840
ABE-1822
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@195589 65c4cc65-6c06-0410-ace0-fbb531ad65f3
chan_sip allows for outbound TLS connections, but does not allow the user to specify what protocol to use (default was SSLv2, and still is if this new option is not specified). This patch lets the user pick the SSL/TLS client method for outbound connections in sip.
(closes issue #14770)
Reported by: TheOldSaint
(closes issue #14768)
Reported by: TheOldSaint
Review: http://reviewboard.digium.com/r/240/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@191177 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Adds option to specify a private key .pem file when configuring TLS or SSL in AMI, HTTP, and SIP. Before this, the certificate file was used for both the public and private key. It is possible for this file to hold both, but most configurations allow for a separate private key file to be specified. Clarified in .conf files how these options are to be used. The current conf files do not explain how the private key is handled at all, so without knowledge of Asterisk's TLS implementation, it would be hard to know for sure what was going on or how to set it up.
Review: http://reviewboard.digium.com/r/234/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@190545 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This allows for you to change the From header for outgoing MWI
NOTIFY requests. Prior to this, the best you could do was to
set a callerid in the general section of sip.conf. The problem
was that this was used for all outbound requests, not just
MWI NOTIFY requests.
AST-201
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@187560 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The channel drivers which have been most heavily tested with these enhancements are
chan_sip and chan_misdn. Further work is being done to add Q.SIG support and will be
introduced in a later commit. chan_skinny has code added to it here, but according
to user pj, the support on chan_skinny is not working as of now. This will be fixed in
a later commit.
A special thanks goes out to bugtracker user gareth for getting the ball rolling and
providing the initial support for this work. Without his initial work on this, this would
not have been nearly as painless as it was.
This functionality has been tested by Digium's product quality department, as well as a
customer site running thousands of calls every day. In addition, many many many many bugtracker
users have tested this, too.
(closes issue #8824)
Reported by: gareth
Review: http://reviewboard.digium.com/r/201
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@186525 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This API provides a generic way for multiple RTP stacks to be
integrated into Asterisk. Right now there is only one present, res_rtp_asterisk,
which is the existing Asterisk RTP stack. Functionality wise this commit
performs the same as previously. API documentation can be viewed in the
rtp_engine.h header file.
Review: http://reviewboard.digium.com/r/209/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@186078 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When the subscription context for a call pickup subscription differs
from the context of the call pickup target, there's not an easy way
to divine what context should be used for the pickup. The way to work
around this is to use PICKUPMARK as the context for the pickup.
This has been documented in the sip.conf.sample file
(ABE-1708)
closes issue #14567
submitted by: alecdavis
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@180155 65c4cc65-6c06-0410-ace0-fbb531ad65f3
With this commit, a register => line in sip.conf may contain a port number in the
"user" section of the line. Please see CHANGES and sip.conf.sample for more
details regarding this.
(closes issue #14198)
Reported by: Nick_Lewis
Patches:
chan_sip.c-domainport2.patch uploaded by Nick (license 657)
Tested by: Nick_Lewis
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@168575 65c4cc65-6c06-0410-ace0-fbb531ad65f3
enabled (either globally or for a specific peer), chan_sip will treat any SDP
data it receives as new data and update the media stream accordingly. By
default, Asterisk will only modify the media stream if the SDP session version
received is different from the current SDP session version. This option is
required to interoperate with devices that have non-standard SDP session
version implementations (observed by toc on the bug tracker with Microsoft OCS
which always uses 0 as the session version).
http://reviewboard.digium.com/r/94/
(closes issue #13958)
Reported by: toc
Tested by: toc
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@165180 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Terry Wilson created the original patch for this functionality, which I slightly modified and added
the faxdetect=yes|no configuration option. This patch is only for T38 fax detection and does not
do anything for G711 over SIP fax detection. By default, this option is disabled.
Reviewboard: http://reviewboard.digium.com/r/69/
This functionality is for issue AST-140.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@161115 65c4cc65-6c06-0410-ace0-fbb531ad65f3
is only found if it dialed the extension that was subscribed to. You can now
specify 'ignore-context' for the 'notifycid' option in sip.conf which will, as
it's value implies, ignore the current context of the caller when doing the
lookup.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@158756 65c4cc65-6c06-0410-ace0-fbb531ad65f3
the calling party when subscribed to the state of an extension that is ringing.
This has some limitations which are documented in sip.conf.sample.
(closes issue #13827)
Reported by: seanbright
Patches:
issue13827.patch uploaded by seanbright (license 71)
Reviewed by: russellb
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@154187 65c4cc65-6c06-0410-ace0-fbb531ad65f3
remotesecret => our password for a remote service
secret => our authentication when someone calls us
Secret => still has both functions if remotesecret is not used.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@153904 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r142865 | tilghman | 2008-09-12 15:37:18 -0500 (Fri, 12 Sep 2008) | 11 lines
Create rules for disallowing contacts at certain addresses, which may
improve the security of various installations. As this does not change
any default behavior, it is not classified as a direct security fix for
anything within Asterisk, but may help PBX admins better secure their
SIP servers.
(closes issue #11776)
Reported by: ibc
Patches:
20080829__bug11776.diff.txt uploaded by Corydon76 (license 14)
Tested by: Corydon76, blitzrage
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@142866 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r137731 | russell | 2008-08-14 09:05:23 -0500 (Thu, 14 Aug 2008) | 4 lines
Comments in this config file were aligned only if your tab size was set to 8.
So, convert tabs to spaces so that things should be aligned regardless of what
tab size you use in your editor.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@137732 65c4cc65-6c06-0410-ace0-fbb531ad65f3
driver into a common place for multiple channel drivers.
(closes issue #13152)
Reported by: caio1982
Patches:
atxfer_complete_sound3.diff uploaded by caio1982 (license 22)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@134401 65c4cc65-6c06-0410-ace0-fbb531ad65f3
fail to setup video RTP if the two endpoints will not support it. This assists
with call files and certain transfers to ensure that if two video phones are
ever connected, they will always share a video feed.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@130951 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Note: I don't think we can start properly without UDP port open, that needs to be tested.
- Removing "bindport" from configuration example, not needed to mention this any more
I suggest we deprecate "bindaddr" and "bindport" in trunk (for 1.6.1)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@128525 65c4cc65-6c06-0410-ace0-fbb531ad65f3
- Adding IP address for TCP and/or TLS too if auto-domain is enabled and
binding to a different IP address
- Fixing documentation in sip.conf.sample
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@128524 65c4cc65-6c06-0410-ace0-fbb531ad65f3
for new dialogs, and the rest listed will be acceptable ways for that peer to contact us. This fixes a minor bug where, because SIP TCP/UDP run on
the same port, could cause a TCP peer to be saved in the ast_db. There will also be warnings when a transport is changed for an unexpected reason.
(issue #12799)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@125891 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r118646 | file | 2008-05-28 11:23:34 -0300 (Wed, 28 May 2008) | 4 lines
Add an option to use the source IP address of RTP as the destination IP address of UDPTL when a specific option is enabled. If the remote side is properly configured (ports forwarded) then UDPTL will flow.
(closes issue #10417)
Reported by: cstadlmann
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@118647 65c4cc65-6c06-0410-ace0-fbb531ad65f3