When configuring the adaptive jitterbuffer, the target_extra
value not only could not be set from the configuration, but was
not even being set to its proper default. This value is required
in order for the adaptive jitterbuffer to work correctly. To resolve
this a config option has been added to expose this value to the conf
files, and a default value is provided when no config specific value
is present.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@249893 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This change builds upon the recent change to menuselect to add 'touch_on_change'
as an attribute of both categories and members. This should allow only the most
invasive defines to cause a complete rebuild, while defines which only affect a
subset of modules will only cause a rebuild of that smaller set.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@246789 65c4cc65-6c06-0410-ace0-fbb531ad65f3
CEL is the new system for logging channel events. This was inspired after
facing many problems trying to represent what is possible to happen to a call
in Asterisk using CDR records. For more information on CEL, see the built in
HTML or PDF documentation generated from the files in doc/tex/.
Many thanks to Steve Murphy (murf) and Brian Degenhardt (bmd) for their hard
work developing this code. Also, thanks to Matt Nicholson (mnicholson) and
Sean Bright (seanbright) for their assistance in the final push to get this
code ready for Asterisk trunk.
Review: https://reviewboard.asterisk.org/r/239/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@203638 65c4cc65-6c06-0410-ace0-fbb531ad65f3
along the way, change tags used in configure script, menuselect-deps and code for various dependencies to be consistently named
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@154151 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Reported by: nickpeirson
Patches:
pbx.c.patch uploaded by nickpeirson (license 579)
replace_bzero+bcopy.patch uploaded by nickpeirson (license 579)
Tested by: nickpeirson, murf
1. replaced all refs to bzero and bcopy to memset and memmove instead.
2. added a note to the CODING-GUIDELINES
3. add two macros to asterisk.h to prevent bzero, bcopy from creeping
back into the source
4. removed bzero from configure, configure.ac, autoconfig.h.in
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@147807 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Per comments from dimas:
1. The code now generates DTMF_BEGIN frames in addition to DTMF_END ones.
2. "quelching" rewritten - now each detector (MF/DTMF/generic tone) may mark fragment of a frame for suppression (squelching, muting) with a call to mute_fragment. Actual muting happens only once at the very end of ast_dsp_process where all marked fragments are zeroed. This way every detector sees original data in the frame without any piece of a frame being zeroed by a detector which was run before.
3. DTMF detector tries to "mute" one block before and one block after the block where actual tone was detected. Muting of previois block is something new for this patch. Obviously this operation is not always possible - if current frame does not contain data for previous block - it is too late. But at least we make our best.
Muting of next block was already done by the old code but it only affects part of the next block which is in the frame being processed. New code keeps this information in state structures so it will mute proper number of samples in the next frame(s) too.
4. Removed ast_dsp_digitdetect and ast_dsp_getdigits APIs because these are not used.
5. DSP API extended a bit - ast_dsp_was_muted() function added which returns true if DSP code was muting any fragment in the last frame. chan_zap uses this function to decide it needs to turn on confmute on the channel.
This is to replace AST_FRAME_DTMF 'm'/'u' (mute/unmute) functionality.
(closes issue #11968)
Reported by: dimas
Patches:
v2-11968-dsp.patch uploaded by dimas (license 88)
v4-11968-zap.patch uploaded by dimas (license 88)
Tested by: dimas, qwell
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@111022 65c4cc65-6c06-0410-ace0-fbb531ad65f3
(closes issue #8925)
About a year ago, as Leif Madsen and Jim van Meggelen were going over the CLI
commands in Asterisk 1.4 for the next version of their book, they documented
a lot of inconsistencies. This set of changes addresses all of these issues
and has been reviewed by Leif.
While this does introduce even more changes to the CLI command structure, it
makes everything consistent, which is the most important thing.
Thanks to all that helped with this one!
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@103171 65c4cc65-6c06-0410-ace0-fbb531ad65f3
see description in config.h .
They are a variant of the set of macros i used in chan_oss.c,
structured in a way to be more robust to the presence of
spurious ';' - basically, they define wrappers for 'do {'
and '} while (0)', plus some helper functions to deal with simple
cases such as ast_copy_string, ast_malloc, strtoul, ast_true ...
The prefix (CV_ as 'Config Variable') tries to be easy to remember
and has been chosen to not conflict with other existing macros in the tree.
For the time being, I have only updated the three source files in the
tree that used the old M_* macros. Hopefully, more files will be
converted.
NOTE:
I understand that inventing my own dialect of C is generally wrong;
however, the lack of adequate support in the language encourages
lazy programming practices (such as ignoring errors, bounds, etc.)
and this increases the chance of vulnerability in the code, especially
because we are parsing user input here.
Hopefully, these macros and the use of ast_parse_arg (in config.h)
should encourage the programmer to write more robust code.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@94191 65c4cc65-6c06-0410-ace0-fbb531ad65f3
build times - tested, there is no measureable difference before and
after this commit.
In this change:
use asterisk/compat.h to include a small set of system headers:
inttypes.h, unistd.h, stddef.h, stddint.h, sys/types.h, stdarg.h,
stdlib.h, alloca.h, stdio.h
Where available, the inclusion is conditional on HAVE_FOO_H as determined
by autoconf.
Normally, source files should not include any of the above system headers,
and instead use either "asterisk.h" or "asterisk/compat.h" which does it
better.
For the time being I have left alone second-level directories
(main/db1-ast, etc.).
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@89333 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Also fixes a few cli messages and some minor formatting.
(closes issue #11001)
Reported by: seanbright
Patches:
newcli.1.patch uploaded by seanbright (license 71)
newcli.2.patch uploaded by seanbright (license 71)
newcli.4.patch uploaded by seanbright (license 71)
newcli.5.patch uploaded by seanbright (license 71)
newcli.6.patch uploaded by seanbright (license 71)
newcli.7.patch uploaded by seanbright (license 71)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@86534 65c4cc65-6c06-0410-ace0-fbb531ad65f3