The example given within the related issue showed 120 lines, which was mostly
a result of the body being XML.
(closes issue #17179)
Reported by: khw
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@261560 65c4cc65-6c06-0410-ace0-fbb531ad65f3
If a recognized media type was present, but the media type was not
enabled for the channel, then a warning would be emitted. For instance,
attempting to get CHANNEL(rtpsource,video) on a call with no video would
cause a warning message to appear.
With this change, the warning will only appear if the stream argument
is not recognized as being a media type that can be specified.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@261313 65c4cc65-6c06-0410-ace0-fbb531ad65f3
From the original issue report opened by Nick Lewis:
Many sip headers in many sip methods contain the ABNF structure
name-andor-addr = name-addr / addr-spec
Examples include the to-header, from-header, contact-header, replyto-header
At the moment chan_sip.c makes various different attempts to parse this name-andor-addr structure for each header type and for each sip method with sometimes limited degrees of success.
I recommend that this name-andor-addr structure be parsed by a dedicated function and that it be used irrespective of the specific method or header that contains the name-andor-addr structure
Nick has also included unit tests for verifying these routines as well, so...heck yeah.
(closes issue #16708)
Reported by: Nick_Lewis
Patches:
reqresp_parser-nameandoraddr2.patch uploaded by Nick Lewis (license 657
Review: https://reviewboard.asterisk.org/r/549
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@256530 65c4cc65-6c06-0410-ace0-fbb531ad65f3
From Reviewboard:
CCSS stands for Call Completion Supplementary Services. An admittedly out-of-date
overview of the architecture can be found in the file doc/CCSS_architecture.pdf
in the CCSS branch. Off the top of my head, the big differences between what is
implemented and what is in the document are as follows:
1. We did not end up modifying the Hangup application at all.
2. The document states that a single call completion monitor may be used across
multiple calls to the same device. This proved to not be such a good idea
when implementing protocol-specific monitors, and so we ended up using one
monitor per-device per-call.
3. There are some configuration options which were conceived after the document
was written. These are documented in the ccss.conf.sample that is on this
review request.
For some basic understanding of terminology used throughout this code, see the
ccss.tex document that is on this review.
This implements CCBS and CCNR in several flavors.
First up is a "generic" implementation, which can work over any channel technology
provided that the channel technology can accurately report device state. Call
completion is requested using the dialplan application CallCompletionRequest and can
be canceled using CallCompletionCancel. Device state subscriptions are used in order
to monitor the state of called parties.
Next, there is a SIP-specific implementation of call completion. This method uses the
methods outlined in draft-ietf-bliss-call-completion-06 to implement call completion
using SIP signaling. There are a few things to note here:
* The agent/monitor terminology used throughout Asterisk sometimes is the reverse of
what is defined in the referenced draft.
* Implementation of the draft required support for SIP PUBLISH. I attempted to write
this in a generic-enough fashion such that if someone were to want to write PUBLISH
support for other event packages, such as dialog-state or presence, most of the effort
would be in writing callbacks specific to the event package.
* A subportion of supporting PUBLISH reception was that we had to implement a PIDF
parser. The PIDF support added is a bit minimal. I first wrote a validation
routine to ensure that the PIDF document is formatted properly. The rest of the
PIDF reading is done in-line in the call-completion-specific PUBLISH-handling
code. In other words, while there is PIDF support here, it is not in any state
where it could easily be applied to other event packages as is.
Finally, there are a variety of ISDN-related call completion protocols supported. These
were written by Richard Mudgett, and as such I can't really say much about their
implementation. There are notes in the CHANGES file that indicate the ISDN protocols
over which call completion is supported.
Review: https://reviewboard.asterisk.org/r/523
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@256528 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This adds rtpsource options analogous to the rtpdest
functions that already exist. In addition, this fixes
potential crashes which could result due to trying to
read values from nonexistent RTP streams.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@254551 65c4cc65-6c06-0410-ace0-fbb531ad65f3
application is executing on a channel.
This patch addresses an issue found during working with end-users
using res_fax. If an incoming call is answered in the dialplan, or
jumps to the 'fax' extension due to reception of a CNG tone (with
faxdetect enabled), and then the remote endpoint sends a T.38
re-INVITE, it is possible for the channel's T.38 state to be
'T38_STATE_NEGOTIATING' when the application starts up. Unfortunately,
even if the application wants to use T.38, it can't respond to the
peer's negotiation request, because the AST_CONTROL_T38_PARAMETERS
control frame that chan_sip sent originally has been lost, and the
application needs the content of that frame to be able to formulate a
reply.
This patch adds a new 'request' type to AST_CONTROL_T38_PARAMETERS,
AST_T38_REQUEST_PARMS. If the application sends this request, chan_sip
will re-send the original control frame (with
AST_T38_REQUEST_NEGOTIATE as the request type), and the application
can respond as normal. If this occurs within the five second timeout
in chan_sip, the automatic cancellation of the peer reinvite will be
stopped, and the application will 'own' the negotiation process from
that point onwards.
This also improves the code path in chan_sip to allow sip_indicate(),
when called for AST_CONTROL_T38_PARAMETERS, to be able to return a
non-zero response, which should have been in place before since the
control frame *can* fail to be processed properly. It also modifies
ast_indicate() to return whatever result the channel driver returned
for this control frame, rather than converting all non-zero results
into '-1'. Finally, the new request type intentionally returns a
positive value, so that an application that sends
AST_T38_REQUEST_PARMS can know for certain whether the channel driver
accepted it and will be replying with a control frame of its own, or
whether it was ignored (if the sip_indicate()/ast_indicate() path had
properly supported failure responses before, this would not be
necessary).
This patch also modifies res_fax to take advantage of the new request.
In addition, this patch makes sip_t38_abort() actually lock the
private structure before doing its work... bad programmer, no donut.
This patch also enhances chan_sip's 'faxdetect' support to allow
triggering on T.38 re-INVITEs received as well as CNG tone detection.
Review: https://reviewboard.asterisk.org/r/556/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@254450 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This change basically reverts the change reviewed in
https://reviewboard.asterisk.org/r/374/ and instead limits the
updating of the RTP synchronization source to only those times when we
detect that the other side of the conversation has changed the ssrc.
The problem is that SRCUPDATE control frames are sent many times where
we don't want a new ssrc, including whenever Asterisk has to send DTMF
in a normal bridge. This is also not the first time that this mistake
has been made. The initial implementation of the ast_rtp_new_source
function also changed the ssrc--and then it was removed because of
this same issue. Then, we put it back in again to fix a different
issue. This patch attempts to only change the ssrc when we see that
the other side of the conversation has changed the ssrc.
It also renames some functions to make their purpose more clear.
Review: https://reviewboard.asterisk.org/r/540/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@252089 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Also includes a test for retrieving rtpqos parameters, including a NULL RTP
driver. Additionally, some further separation of the SIP internal API into
headers was necessary.
(closes issue #16652)
Reported by: kkm
Patches:
20100204__issue16652.diff.txt uploaded by tilghman (license 14)
Review: https://reviewboard.asterisk.org/r/501/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@247124 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Code Refactoring Changes
- read_to_parts() moved to reqresp_parser.c and has been renamed as
get_name_and_number()
- get_in_brackets() moved to reqresp_parser.c
- find_closing_quotes() added to sip_utils.h
Logic Changes
- get_name_and_number() now uses parse_uri() and get_calleridname()
for parsing. Before this change only names within quotes were
found, when names not within quotes are possible.
New Unit Tests
-sip_get_name_and_number_test
-sip_get_in_brackets_test
(closes issue #16707)
Reported by: Nick_Lewis
Patches:
issue16706.diff uploaded by dvossel (license 671)
Review: https://reviewboard.asterisk.org/r/499/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@246627 65c4cc65-6c06-0410-ace0-fbb531ad65f3
1) It occurred to me that the difference in usage between the error ast_str and
the ast_test_update_status() usage has turned out to be a bit ambiguous in
practice. In a lot of cases, the same message was being sent to both.
In other cases, it was only sent to one or the other. My opinion now is that
in every case, I think it makes sense to do both; we should output it to the
CLI as well as save it off for logging purposes.
This change results in most of the changes in this diff, since it required
changes to all existing unit tests. It also allowed for some simplifications
of unit test API implementation code.
2) Update ast_test_status_update() to include the file, function, and line
number for the code providing the update.
3) There are some formatting tweaks here and there. Hopefully they aren't too
distracting for code review purposes. Reviewboard's diff viewer seems to do a
pretty good job of pointing out when something is a whitespace change.
4) I moved the md5_test and sha1_test into the test_utils module. It seemed
like a better approach since these tests are so tiny.
5) I changed the number of nodes used in heap_test_2 from 1 million to
100 thousand. The only reason for this was to reduce the time it took
for this test to run.
6) Remove an unused function prototype that was at the bottom of utils.h.
7) Simplify test_insert() using the LIST_INSERT_SORTALPHA() macro. The one
minor difference in behavior is that it no longer checks for a test registered
with the same name.
8) Expand the code in test_alloc() to provide specific error messages for each
failure case, to clearly inform developers if they forget to set the name,
summary, description, etc.
9) Tweak the output of the "test show registered" CLI command. I swapped the
name and category to have the category first. It seemed more natural since
that is the sort key.
10) Don't output the status ast_str in the "test show results" CLI command.
This is going to tend to be pretty verbose, so just leave that for the
detailed test logs (test generate results).
Review: https://reviewboard.asterisk.org/r/493/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@245864 65c4cc65-6c06-0410-ace0-fbb531ad65f3
default expiry was not being set correctly for a registry object.
Thanks to ebroad for reporting the issue and testing the patch.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@244924 65c4cc65-6c06-0410-ace0-fbb531ad65f3
New files
- channels/sip/sip.h – A new header for shared #define, enum, and struct
definitions.
- channels/sip/include/sip_utils.h – sip util functions shared among
the all the sip APIs
- channels/sip/include/config_parser.h – sip config-parser API
- channels/sip/config_parser.c – Contains sip.conf parsing helper functions
with unit tests.
- channels/sip/include/reqresp_parser.h – sip request response parser API
- channels/sip/reqresp_parser.c – Contains sip request and response parsing
helper functions with unit tests.
New Unit Tests
- sip_parse_uri_test
- sip_parse_host_test
- sip_parse_register_line_test
Code Refactoring
- All reusable #define, enum, and struct definitions were moved out of chan_sip.c
into sip.h. During this process formatting changes were made to comments
in both sip.h and chan_sip.c in order to better adhere to the coding guidelines.
- The beginnings of three new sip APIs, sip-utils.h, config-parser.h,
reqresp-parser.h using existing chan_sip.c functions.
- parse_uri() and get_calleridname() were moved from chan_sip.c to request-parser.c
along with unit tests for both functions.
- sip_parse_host() and sip_parse_register_line() were moved from chan_sip.c to
config-parser.c along with unit tests for both functions.
Changes to parse_uri()
-removal of the options parameter. It was never used and did not behave correctly.
-additional check for [?header] field. When this field was present, the transport
type was not being set correctly.
----- Overview -----
This patch is introduced with the hope that unit tests for all our sip parsing
functions will be written soon. chan_sip is a huge file, and with the addition of
each unit test chan_sip is going to grow larger and harder to maintain. I'm proposing
we begin refactoring chan_sip, starting with the parsing functions. With each parsing
function we move into a separate helper file, a unit test should accompany it. I've
attempted to lay down the ground work for this change by creating two new parser
helper files (config-parser.c and reqresp-parser.c) and moving all shared structs,
enums, and defines from chan_sip.c into a shared sip.h file. We can't verify everything
in Asterisk using unit tests, but string parsing is one area where unit tests make
the most sense. By beginning to restructure the code in this way, chan_sip not only
becomes less bloated, but Asterisk as a whole will become more stable.
Review: https://reviewboard.asterisk.org/r/477/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@244597 65c4cc65-6c06-0410-ace0-fbb531ad65f3