For all OSes:
* Disabled third-party codecs in pjproject and added
'--disable-speex-codec --disable-speex-aec --disable-gsm-codec' to the
configure options since we don't use the pjsip codec capability.
FreeBSD:
* Added FreeBSD support to install_prereq.
* Changed pjproject/configure.m4 to use $GNU_MAKE instead of hardcoding "make".
* Added __progname and environ to asterisk.exports.in.
* Reverted the use of ldconfig to create shared library symlinks to ln.
* Only enable epoll in pjproject if `uname -s` is Linux.
* Added a patch to pjproject to take the name of the 'make' command from
an environment variable if supplied. This is needed for the python bindings.
(merged by Teluu into pjproject trunk 5/3/2016)
FreeBSD support isn't complete. Still some general issues regarding
make/gmake having nothing to do with pjproject. With some handholding it DOES
build successfully.
CentOS:
Added 'patch' and 'bzip2' to install_prereq PACKAGES_RH.
CentOS 6/7 32/64 build and run the pjsip testsuite successfully.
Ubuntu:
No changes required.
Ubuntu 15/16 32/64 build and run the pjsip testsuite successfully.
Debian:
No changes required.
Debian 6/7/8 32/64 build and run the pjsip testsuite successfully.
There will utimately be a follow-up patch to create an install_prereq for
the testsuite as I've discovered a few missing requirements.
ASTERISK-25968 #close
Change-Id: I5756a07facfc63798115a5e73a8709382fe9259c
LDCONFIG apparently isn't set to something sane on all systems so the creation
of the shared library links fails. Instead of just testing for non-blank,
main/Makefile now checks that LDCONFIG is actually executable and reverts to
LN if it isn't.
This applies to both libasteriskpj and libasteriskssl.
Thanks to 'abelbeck' for pointing out that the issue was LDCONFIG.
ASTERISK-25873 #close
Reported-by: Hans van Eijsden
Change-Id: I25b76379bc637726ec044b2c0e709b56b3701729
Background here:
http://lists.digium.com/pipermail/asterisk-dev/2016-January/075266.html
From CHANGES:
* To help insure that Asterisk is compiled and run with the same known
version of pjproject, a new option (--with-pjproject-bundled) has been
added to ./configure. When specified, the version of pjproject specified
in third-party/versions.mak will be downloaded and configured. When you
make Asterisk, the build process will also automatically build pjproject
and Asterisk will be statically linked to it. Once a particular version
of pjproject is configured and built, it won't be configured or built
again unless you run a 'make distclean'.
To facilitate testing, when 'make install' is run, the pjsua and pjsystest
utilities and the pjproject python bindings will be installed in
ASTDATADIR/third-party/pjproject.
The default behavior remains building with the shared pjproject
installation, if any.
Building:
All you have to do is include the --with-pjproject-bundled option on
the ./configure command line (and remove any existing --with-pjproject
option if specified). Everything else is automatic.
Behind the scenes:
The top-level Makefile was modified to include 'third-party' in the
list of MOD_SUBDIRS.
The third-party directory was created to contain any third party
packages that may be needed in the future. Its Makefile automatically
iterates over any subdirectories passing on targets.
The third-party/pjproject directory was created to house the pjproject
source distribution. Its Makefile contains targets to download, patch
configure, generate dependencies, compile libs, apps and python bindings,
sanitized build.mak and generate a symbols list.
When bootstrap.sh is run, it automatically includes the configure.m4
file in third-party/pjproject. This file has a macro to download and
conifgure pjproject and get and set PJPROJECT_INCLUDE, PJPROJECT_DIR
and PJPROJECT_BUNDLED. It also tests for the capabilities like
PJ_TRANSACTION_GRP_LOCK by parsing preprocessor output as opposed to
trying to compile. Of course, bootstrap.sh is only run once and the
configure file is incldued in the patch.
When configure is run with the new options, the macro in configure.m4
triggers the download, patch, conifgure and tests. No compilation is
performed at this time. The downloaded tarball is cached in /tmp so
it doesn't get downloaded again on a distclean.
When make is run in the top-level Asterisk source directory, it will
automatically descend all the subdirectories in third_party just as it
does for addons, apps, etc. The top-level Makefile makes sure that
the 'third-party' is built before 'main' so that dependencies from the
other directories are built first.
When main does build, a new shared library (libasteriskpj) is created that
links statically to the pjproject .a files and exports all their symbols.
The asterisk binary links to that, just as it does with libasteriskssl.
When Asterisk is installed, the pjsua and pjsystest apps, and the pjproject
python bindings are installed in ASTDATADIR/third-party/pjproject. This
will facilitate testing, including running the testsuite which will be
updated to check that directory for the pjsua module ahead of the system
python library.
Modules should continue to depend on pjproject if they use pjproject APIs
directly. They should not care about the implementation. No changes to any
res_pjsip modules were made.
Change-Id: Ia7a60c28c2e9ba9537c5570f933c1ebcb20a3103
clock_gettime() is, unfortunately, not portable. But I did like that
over our usual `ts.tv_nsec = tv.tv_usec * 1000` copy/paste code we
usually do when we want a timespec and all we have is ast_tvnow().
This patch adds ast_tsnow(), which mimics ast_tvnow(), but returns a
timespec. If clock_gettime() is available, it will use that. Otherwise
ast_tsnow() falls back to using ast_tvnow().
Change-Id: Ibb1ee67ccf4826b9b76d5a5eb62e90b29b6c456e
* Add some type casting so tv_usec can really be a long, instead of
some strange platform specific type.
* Add some .dylib style files to .gitignore.
* Switch from using -Xlinker to -Wl,. For [reasons unknown][], newer
versions of GCC, when compiling the Homebrew formula for Asterisk,
are not properly passing the -Xlinker options to the linker. Given
that -Wl, does exactly the [same thing][], and does it properly, this
patch changes the -Xlinker options to use -Wl, instead.
[reasons unknown]: http://bit.ly/1SUbEYx
[same thing]: https://gcc.gnu.org/onlinedocs/gcc/Link-Options.html
Change-Id: Id5e6b3c6cc86282ea5fca630dc3991137c5bf4dd
ast_module_info->self is often needed to register items with the core. Many
modules have ad-hoc code to make this pointer available to auxiliary sources.
This change updates the module build process to make the needed information
available to all sources in a module.
ASTERISK-25056 #close
Reported by: Corey Farrell
Change-Id: I18c8cd58fbcb1b708425f6757becaeca9fa91815
RAII_VAR, which is used extensively in Asterisk to manage reference counted
resources, uses a GCC extension to automatically invoke a cleanup function
when a variable loses scope. While this functionality is incredibly useful
and has prevented a large number of memory leaks, it also prevents Asterisk
from being compiled with clang.
This patch updates the RAII_VAR macro such that it can be compiled with clang.
It makes use of the BlocksRuntime, which allows for a closure to be created
that performs the actual cleanup.
Note that this does not attempt to address the numerous warnings that the clang
compiler catches in Asterisk.
Much thanks for this patch goes to:
* The folks on StackOverflow who asked this question and Leushenko for
providing the answer that formed the basis of this code:
http://stackoverflow.com/questions/24959440/rewrite-gcc-cleanup-macro-with-nested-function-for-clang
* Diederik de Groot, who has been extremely patient in working on getting this
patch into Asterisk.
Review: https://reviewboard.asterisk.org/r/4370/
ASTERISK-24133
ASTERISK-23666
ASTERISK-20399
ASTERISK-20850 #close
Reported by: Diederik de Groot
patches:
RAII_CLANG.patch uploaded by Diederik de Groot (License 6600)
........
Merged revisions 432807 from http://svn.asterisk.org/svn/asterisk/branches/11
........
Merged revisions 432808 from http://svn.asterisk.org/svn/asterisk/branches/13
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@432809 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The previous patch (r418034) fixed the 'glitch' that the channels/h323
Makefile no longer existed. Unfortunately, removing the entire line was a bit
of a blunder, as it meant that build_tools/menuselect-deps was never
generated. Hilarity ensued when actually trying to compile.
But hey! At least configure worked.
This patch fixes *that* glitch, and removes some more of the vestiges of h323.
(It had tendrils in the main Makefile? Crazy.)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@418035 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This prevents XML documentation duplication by expanding channel and
bridge snapshot tags into channel and bridge snapshot parameter sets
with a given prefix or defaulting to no prefix. This also prevents
documentation from becoming fractured and out of date by keeping all
variations of the documentation in template form such that it only
needs to be updated once and keeps maintenance to a minimum.
Review: https://reviewboard.asterisk.org/r/2708/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@395985 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch adds authentication support to ARI.
Two authentication methods are supported. The first is HTTP Basic
authentication, as specified in RFC 2617[1]. The second is by simply
passing the username and password as an ?api_key query parameter
(which allows swagger-ui[2] to authenticate more easily).
ARI usernames and passwords are configured in the ari.conf file
(formerly known as stasis_http.conf). The user may be set to
`read_only`, which will prohibit the user from issuing POST, DELETE,
etc. Also, the user's password may be specified in either plaintext,
or encrypted using the crypt() function.
Several other notes about the patch.
* A few command line commands for seeing ARI config and status were
also added.
* The configuration parsing grew big enough that I extracted it to
its own file.
[1]: http://www.ietf.org/rfc/rfc2617.txt [2]:
https://github.com/wordnik/swagger-ui
(closes issue ASTERISK-21277)
Review: https://reviewboard.asterisk.org/r/2649/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@393530 65c4cc65-6c06-0410-ace0-fbb531ad65f3
For about forever, our build flags for OS X have been slightly off, but
good enough to build and run. Apparently they aren't good enough any more.
Previously, we would compile with macosx-version-min unset and link with
it set. This combination, using GCC 4.8, on Mountain Lion, would create a
bad executable ("Illegal Instruction: 4", or something like that)
This patch consistently sets macosx-version-min for both compiling and
linking, which makes everything happy enough to build and run.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@392279 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The library that provides UUID support varies greatly from system to
system. On most Linux distros, it's in libuuid. On OpenBSD, it's in
libe2fs-uuid. On OS X, it is in libsystem.
This patch plays hide-and-seek with UUID support, looking for it in the
three places we know about. It also corrects the Makefile so that it uses
the configured library name and include path.
(closes issue ASTERISK-21816)
Reported by: Brad Latus (snuffy)
Tested by: Brad Latus (snuffy)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@390352 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Core modules don't honor <depend> flags in MODULEINFO, which broke jansson
if specified --with-jansson to configure.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@383633 65c4cc65-6c06-0410-ace0-fbb531ad65f3
* This allows us to remove some special-case build logic.
* 10.5 is down to less that 8% of the OS X market share. 10.4 is down to
under 2%.
* Apple is no longer releasing security updates for 10.5 and earlier.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@379495 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This provides a JSON API by pulling in and wrapping the Jansson JSON
library[1]. The Asterisk API basically mirrors the Jansson
functionality, with a few minor tweaks.
* Some names have been asteriskified to protect the innocent.
* Jansson provides both reference-stealing and reference-borrowing
versions of several API's. The Asterisk API is exclusively
reference-stealing for operations that put elements into arrays and
objects.
* No support for doubles, since we usually don't need that.
* Coming along for the ride is the ast_test_validate macro, which made
the unit tests much easier to write.
[1]: http://www.digip.org/jansson/
(issue ASTERISK-20887)
(closes issue ASTERISK-20888)
Review: https://reviewboard.asterisk.org/r/2264/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@378915 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This provides a common API for dealing with unique identifiers.
The API provides methods to create, parse, copy, and stringify UUIDs.
An accompanying unit test is provided that tests all operations.
(closes issue ASTERISK-20726)
reported by Matt Jordan
Review: https://reviewboard.asterisk.org/r/2217
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@377846 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Update title that was left behind many years ago. Used revision 6596 as my guide for what it should be.
(issue ASTERISK-20259)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@375007 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The previous change to the build system for using a system-provided editline
library was missing a crucial include directory for building against the
copy of the library in the Asterisk source tree.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@370488 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch changes the build system to refer to the embedded editline directory
using an absolute path, which will resolve a problem seen on the CentOS
automated build agents.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@370482 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch changes the Asterisk configure script and build system to detect
the presence of the NetBSD editline library (libedit) on the system. If it is
found, it will be used in preference to the version included in the Asterisk
source tree.
(closes issue ASTERISK-18725)
Reported by: Jeffrey C. Ollie
Review: https://reviewboard.asterisk.org/r/1528/
Patches:
0001-Allow-linking-building-against-an-external-editline.patch uploaded by jcollie (license #5373) (heavily modified by kpfleming)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@370481 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When Asterisk is used with various third-party libraries (CURL, PostgresSQL,
many others) that have the ability themselves to use OpenSSL, it is possible
for conflicts to arise in how the OpenSSL libraries are initialized and
shutdown. This patch addresses these conflicts by 'wrapping' the important
functions from the OpenSSL libraries in a new shared library that is part
of Asterisk itself, and is loaded in such a way as to ensure that *all*
calls to these functions will be dispatched through the Asterisk wrapper
functions, not the native functions.
This new library is optional, but enabled by default. See the CHANGES file
for documentation on how to disable it.
Along the way, this patch also makes a few other minor changes:
* Changes MODULES_DIR to ASTMODDIR throughout the build system, in order to
more closely match what is used during run-time configuration.
* Corrects some errors in the configure script where AC_CHECK_TOOLS was used
instead of AC_PATH_PROG.
* Adds a new variable for linker flags in the build system (DYLINK), used for
producing true shared libraries (as opposed to the dynamically loadable
modules that the build system produces for 'regular' Asterisk modules).
* Moves the Makefile bits that handle installation and uninstallation of the
main Asterisk binary into main/Makefile from the top-level Makefile.
* Moves a couple of useful preprocessor macros from optional_api.h to
asterisk.h.
Review: https://reviewboard.asterisk.org/r/1006/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@353317 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/10
................
r336734 | tilghman | 2011-09-19 15:29:40 -0500 (Mon, 19 Sep 2011) | 18 lines
Merged revisions 336733 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r336733 | tilghman | 2011-09-19 15:27:03 -0500 (Mon, 19 Sep 2011) | 11 lines
Various changes to allow 1.8 to compile on Mac OS X Lion (10.7)
* Makefile workaround for 10.6 extended to work on 10.7 and later.
* Now uses the 'weak' symbol for Lion systems, which no longer support
'weak_import'
Closes ASTERISK-17612.
Closes ASTERISK-18213.
Tested by: tilghman, oej.
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@336735 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/10
................
r330763 | kmoore | 2011-08-03 10:15:26 -0500 (Wed, 03 Aug 2011) | 16 lines
Merged revisions 330762 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r330762 | kmoore | 2011-08-03 10:14:36 -0500 (Wed, 03 Aug 2011) | 9 lines
editing files in main/editline does not ensure rebuild of libedit.a
When editing a source file in main/editline, the build system does not rebuild
libedit.a and uses the already existing one instead. Adding a PHONY to
CHECK_SUBDIR fixes this problem.
(closes issue ASTERISK-16221)
Patch-by: Walter Doekes
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@330764 65c4cc65-6c06-0410-ace0-fbb531ad65f3
There were some bugs in the very ancient version of Berkeley DB that Asterisk
used. Instead of spending the time tracking down the bugs in the Berkeley code
we move to the much better documented SQLite 3.
Conversion of the old astdb happens at runtime by running the included
astdb2sqlite3 utility. The ast_db API with SQLite 3 backend should behave
identically to the old Berkeley backend, but in the future we could offer a
much more robust interface.
We do not include the SQLite 3 library in the source tree, but instead rely
upon the distribution-provided libraries. SQLite is so ubiquitous that this
should not place undue burden on administrators.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@326589 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
................
r298960 | tilghman | 2010-12-17 17:52:04 -0600 (Fri, 17 Dec 2010) | 20 lines
Merged revisions 298957 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
................
r298957 | tilghman | 2010-12-17 17:30:55 -0600 (Fri, 17 Dec 2010) | 13 lines
Merged revisions 298905 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r298905 | tilghman | 2010-12-17 15:40:56 -0600 (Fri, 17 Dec 2010) | 6 lines
Let Asterisk find better backtrace information with libbfd.
The menuselect option BETTER_BACKTRACES, if enabled, will use libbfd to search
for better symbol information within both the Asterisk binary, as well as
loaded modules, to assist when using inline backtraces to track down problems.
Review: https://reviewboard.asterisk.org/r/1055/
........
................
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@298961 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When ASTCFLAGS was specified with the make command, Makefile.rules was using
the specified value from the command line and not the one here, making it so this
flag would go missing.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@267303 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Some platforms prefix externally-visible symbols in object files generated
from C sources (most commonly, '_' is the prefix). On these platforms,
the existing symbol export filtering process ends up suppressing all the symbols
that are supposed to be left visible. This patch allows the prefix string
to be supplied to the top-level Makefile in the LINKER_SYMBOL_PREFIX variable,
and then generates the linker scripts as required to include the prefix
supplied.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@255906 65c4cc65-6c06-0410-ace0-fbb531ad65f3
users expect them to work.
'core set debug' and 'core set verbose' can optionally change the
level for a specific filename; however, this is actually for a
specific source file name, not the module that source file is included
in. With examples like chan_sip, chan_iax2, chan_misdn and others
consisting of multiple source files, this will not lead to the
behavior that users expect. If they want to set the debug level for
chan_sip, they want it set for all of chan_sip, and not to have to
also set it for reqresp_parser and other files that comprise the
chan_sip module.
This patch changes this functionality to be module-name based instead
of file-name based.
To make this work, some Makefile modifications were required to ensure
that the AST_MODULE definition is present in each object file produced
for each module as well.
Review: https://reviewboard.asterisk.org/r/574/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@253917 65c4cc65-6c06-0410-ace0-fbb531ad65f3
