Originated channels are a bit odd - they are technically a dialed channel (thus
the party B or peer) but, since there is no caller, they are treated as the
party A. When entering into a bridge that already contains participants, the CDR
engine - if the CDR record is in the Dial state - attempts to match the person
entering the bridge with an existing participant. The idea is that if you dialed
someone and the person you dialed is already in the bridge, you don't need a new
CDR record, the existing CDR record describes the relationship.
Unfortunately, for an originated channel, there is no Party B. If no one was in
the bridge this didn't cause any issues; however, if participants were in the
bridge the CDR engine would attempt to match a non-existant Party B on the
channel's CDR record and explode.
This patch fixes that, and a unit test has been added to cover this case.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@393164 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Sorcery specific object information is now opaque and allocated with the object.
This means that modules do not need to be recompiled if the sorcery specific part
is changed. It also means that sorcery can store additional information on objects
and ensure it is freed or the reference count decreased when the object goes away.
To facilitate the above a generic sorcery allocator function has been added which
also ensures that allocated objects do not have a lock.
Extended fields have been added thanks to all of the above which allows specific fields
to be marked as extended, and thus simply stored as-is within the object. Type safety
is *NOT* enforced on these fields. A consumer of them has to query and ultimately perform
their own safety check. What does this mean? Extra modules can extend already defined
structures without having to modify them.
Tests have also been included to verify extended field functionality.
Review: https://reviewboard.asterisk.org/r/2585/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@392586 65c4cc65-6c06-0410-ace0-fbb531ad65f3
In r391947, the CDR function was modified such that it will return a
value for the start,answer, and end times if asked. That time will just
be 0 if it hasn't happened yet.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@392190 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch is the initial push to update Asterisk's CDR engine for the new
bridging framework. This patch guts the existing CDR engine and builds the new
on top of messages coming across Stasis. As changes in channel state and bridge
state are detected, CDRs are built and dispatched accordingly. This
fundamentally changes CDRs in a few ways.
(1) CDRs are now *very* reflective of the actual state of channels and bridges.
This means CDRs track well with what an actual channel is doing - which
is useful in transfer scenarios (which were previously difficult to pin
down). It does, however, mean that CDRs cannot be 'fooled'. Previous
behavior in Asterisk allowed for CDR applications, channels, and other
properties to be spoofed in parts of the code - this no longer works.
(2) CDRs have defined behavior in multi-party scenarios. This behavior will not
be what everyone wants, but it is a defined behavior and as such, it is
predictable.
(3) The CDR manipulation functions and applications have been overhauled. Major
changes have been made to ResetCDR and ForkCDR in particular. Many of the
options for these two applications no longer made any sense with the new
framework and the (slightly) more immutable nature of CDRs.
There are a plethora of other changes. For a full description of CDR behavior,
see the CDR specification on the Asterisk wiki.
(closes issue ASTERISK-21196)
Review: https://reviewboard.asterisk.org/r/2486/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@391947 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When a Stasis message type is defined in a loadable module, handling
those messages for AMI and res_stasis events can be cumbersome.
This patch adds a vtable to stasis_message_type, with to_ami and
to_json virtual functions. These allow messages to be handled
abstractly without putting module-specific code in core.
As an example, the VarSet AMI event was refactored to use the to_ami
virtual function.
(closes issue ASTERISK-21817)
Review: https://reviewboard.asterisk.org/r/2579/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@391403 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Stasis cache clear message payloads now consist of a stasis_message
representative of the message to be cleared from the cache. This allows
multiple parallel caches to coexist and be cleared properly by the same
cache clear message even when keyed on different fields.
This change fixes a bug where multiple cache clears could be posted for
channels. The cache clear is now produced in the destructor instead of
ast_hangup.
Additionally, dummy channels are no longer capable of producing channel
snapshots.
Review: https://reviewboard.asterisk.org/r/2596
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@390830 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This moves the JSON event generators out of the Stasis-HTTP modules and
into standalone JSON-related counterparts so that Stasis-HTTP and
res_stasis can depend on them without creating dependency cycles. This
also provides a future location for Swagger Model validator functions
once the generators for that code are written.
Review: https://reviewboard.asterisk.org/r/2534/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@388668 65c4cc65-6c06-0410-ace0-fbb531ad65f3
I've noticed when doing a graceful shutdown that the res_stasis_http.so
module gets unloaded before the modules that use it, which causes some
asserts during their unload.
While r386928 was a quick hack to get it to not assert and die, this
patch increases the use counts on res_stasis.so and res_stasis_http.so
properly. It's a bigger change than I expected, hence the review instead
of just committing it.
Review: https://reviewboard.asterisk.org/r/2489/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@388350 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When we first introduced the channel blob types, the JSON blobs were
self identifying by a required "type" field in the JSON object
itself. This, as it turns out, was a bad idea.
When we introduced the message router, it was useless for routing based
on the JSON type. And messages had two type fields to check: the
stasis_message_type() of the message itself, plus the type field in the
JSON blob (but only if it was a blob message).
This patch corrects that mistake by removing the required type field
from JSON blobs, and introducing first class stasis_message_type objects
for the actual message type.
Since we now will have a proliferation of message types, I introduced a
few macros to help reduce the amount of boilerplate necessary to set
them up.
Review: https://reviewboard.asterisk.org/r/2509
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@388005 65c4cc65-6c06-0410-ace0-fbb531ad65f3
An endpoint is an external device/system that may offer/accept
channels to/from Asterisk. While this is a very useful concept for end
users, it is surprisingly not a core concept within Asterisk itself.
This patch defines ast_endpoint as a separate object, which channel
drivers may use to expose their concept of an endpoint. As the channel
driver creates channels, it can use ast_endpoint_add_channel() to
associate channels to the endpoint. This updated the endpoint
appropriately, and forwards all of the channel's events to the
endpoint's topic.
In order to avoid excessive locking on the endpoint object itself, the
mutable state is not accessible via getters. Instead, you can create a
snapshot using ast_endpoint_snapshot_create() to get a consistent
snapshot of the internal state.
This patch also includes a set of topics and messages associated with
endpoints, and implementations of the endpoint-related RESTful
API. chan_sip was updated to create endpoints with SIP peers, but the
state of the endpoints is not updated with the state of the peer.
Along for the ride in this patch is a Stasis test API. This is a
stasis_message_sink object, which can be subscribed to a Stasis
topic. It has functions for blocking while waiting for conditions in
the message sink to be fulfilled.
(closes issue ASTERISK-21421)
Review: https://reviewboard.asterisk.org/r/2492/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@387932 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This change adds the ability for modules to add themselves as observers
to sorcery object types. Observers can be notified when objects are
created, updated, or deleted as well as when the object type is loaded or
reloaded. Observer notifications are done using a thread pool in a serialized
fashion so the caller of the sorcery API calls is minimally impacted.
This also adds the ability to create JSON changesets of a sorcery object.
Tests are also present to confirm all of the above functionality.
Review: https://reviewboard.asterisk.org/r/2477/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@387662 65c4cc65-6c06-0410-ace0-fbb531ad65f3
* Fixed crash when res_stasis_http is unloaded before the
implementation modules.
* Cleaned up test initialization for test_stasis_http.so.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@386928 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This change does the following:
1. Adds the sorcery realtime module
2. Adds unit tests for the sorcery realtime module
3. Changes the realtime core to use an ast_variable list instead of variadic arguments
4. Changes all realtime drivers to accept an ast_variable list
Review: https://reviewboard.asterisk.org/r/2424/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@386731 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The pimp_my_sip branch is being merged at this point because
it offers basic functionality, and from an API standpoint, things
are complete.
SIP work is *not* feature-complete; however, with the completion
of the SUBSCRIBE/NOTIFY API, all APIs (except a PUBLISH API) have
been created, and thus it is possible for developers to attempt
to create new SIP work.
API documentation can be found in the doxygen in the code, but
usability documentation is still lacking.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@386540 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The API itself is documented using Swagger, a lightweight mechanism for
documenting RESTful API's using JSON. This allows us to use swagger-ui
to provide executable documentation for the API, generate client
bindings in different languages, and generate a lot of the boilerplate
code for implementing the RESTful bindings. The API docs live in the
rest-api/ directory.
The RESTful bindings are generated from the Swagger API docs using a set
of Mustache templates. The code generator is written in Python, and
uses Pystache. Pystache has no dependencies, and be installed easily
using pip. Code generation code lives in rest-api-templates/.
The generated code reduces a lot of boilerplate when it comes to
handling HTTP requests. It also helps us have greater consistency in the
REST API.
(closes issue ASTERISK-20891)
Review: https://reviewboard.asterisk.org/r/2376/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@386232 65c4cc65-6c06-0410-ace0-fbb531ad65f3
In the move from Asterisk's event system to Stasis, this makes
distributed device state aggregation always-on, removes unnecessary
task processors where possible, and collapses aggregate and
non-aggregate states into a single cache for ease of retrieval. This
also removes an intermediary step in device state aggregation.
Review: https://reviewboard.asterisk.org/r/2389/
(closes issue ASTERISK-21101)
Patch-by: Kinsey Moore <kmoore@digium.com>
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@385860 65c4cc65-6c06-0410-ace0-fbb531ad65f3
After some discussion on asterisk-dev, it was decided that the bulk of
the logic in app_stasis actually belongs in a resource module instead
of the application module.
This patch does that, leaves the app specific stuff in app_stasis, and
fixes up everything else to be consistent with that change.
* Renamed test_app_stasis to test_res_stasis
* Renamed app_stasis.h to stasis_app.h
* This is still stasis application support, even though it's no
longer in an app_ module. The name should never have been tied to
the type of module, anyways.
* Now that json isn't a resource module anymore, moved the
ast_channel_snapshot_to_json function to main/stasis_channels.c,
where it makes more sense.
Review: https://reviewboard.asterisk.org/r/2430/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@385742 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch does the following:
* A new Stasis payload has been defined for multi-channel messages. This
payload can store multiple ast_channel_snapshot objects along with a single
JSON blob. The payload object itself is opaque; the snapshots are stored
in a container keyed by roles. APIs have been provided to query for and
retrieve the snapshots from the payload object.
* The Dial AMI events have been refactored onto Stasis. This includes dial
messages in app_dial, as well as the core dialing framework. The AMI events
have been modified to send out a DialBegin/DialEnd events, as opposed to
the subevent type that was previously used.
* Stasis messages, types, and other objects related to channels have been
placed in their own file, stasis_channels. Unit tests for some of these
objects/messages have also been written.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@384910 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This is the API that binds the Stasis dialplan application to external
Stasis applications. It also adds the beginnings of WebSocket
application support.
This module registers a dialplan function named Stasis, which is used
to put a channel into the named Stasis app. As a channel enters and
leaves the Stasis diaplan application, the Stasis app receives a
'stasis-start' and 'stasis-end' events.
Stasis apps register themselves using the stasis_app_register and
stasis_app_unregister functions. Messages are sent to an application
using stasis_app_send.
Finally, Stasis apps control channels through the use of the
stasis_app_control object, and the family of stasis_app_control_*
functions.
Other changes along for the ride are:
* An ast_frame_dtor function that's RAII_VAR safe
* Some common JSON encoders for name/number, timeval, and
context/extension/priority
Review: https://reviewboard.asterisk.org/r/2361/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@384879 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch fixes an issue of message ordering that occurs when
multiple topics are forwarded to an aggregator topic (such as
ast_channel_topic_all()).
It is (very reasonably) expected that the rules governing message
dispatch order still apply, so long as the messages start from the
same thread, and are received by the same subscription. Because the
existing code had an additional layer of dispatching via the Stasis
thread pool for forwards, those promises couldn't be kept.
Forwarding subscriptions no longer have their own mailbox, and now
dispatch directly from the forwarding topic's stasis_publish()
call. This means that the topic's lock is held for the duration of not
only a message's dispatch, but the dispatch of all the forwards. This
shouldn't be a problem right now, but if an aggregator topic had many
subscribers, it could become a problem. But I figure we can write more
clever code when the time comes, if necessary.
Review: https://reviewboard.asterisk.org/r/2419/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@384413 65c4cc65-6c06-0410-ace0-fbb531ad65f3
* Updated test_uuid.c to test the new API call.
* Made system use the new API call to eliminate "10's of lines" where
used.
* Fixed untested ast_strdup() return in stasis_subscribe() by eliminating
the need for it. struct stasis_subscription now contains the uniqueid[]
string.
* Fixed some issues in exchangecal_write_event():
Create uid with enough space for a UUID string to avoid a realloc.
Fix off by one error if the calendar event provided a UUID string.
There is no need to check for NULL before calling ast_free().
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@384302 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch started out simply as fixing the bouncing tests introduced
in r382685, but required some other changes to give it a decent
implementation.
To fix the bouncing tests, the UserEvent and Newexten AMI events
needed to be refactored to dispatch via Stasis. Dispatching directly
to AMI resulted in those events sometimes getting ahead of the
associated Newchannel events, which would understandably confuse anyone.
I found that instead of creating a zillion different message types and
structures associated with them, it would be preferable to define a
message type that has a channel snapshot and a blob of structured data
with a small bit of additional information. The JSON object model
provides a very nice way of representing structured data, so I went
with that.
* Move JSON support from res_json.c to main/json.c
* Made libjansson-dev a required dependency
* Added an ast_channel_blob message type, which has a channel
snapshot and JSON blob of data.
* Changed UserEvent and Newexten events so that they are dispatched
via ast_channel_blob messages on the channel's topic.
* Got rid of the ast_channel_varset message; used ast_channel_blob
instead.
* Extracted the manager functions converting Stasis channel events to
AMI events into manager_channel.c.
(issue ASTERISK-21096)
Review: https://reviewboard.asterisk.org/r/2381/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@383579 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Often times, when subscribing to a topic, one wants to handle
different message types differently. While one could cascade if/else
statements through the subscription handler, it is much cleaner to
specify a different callback for each message type. The
stasis_message_router is here to help!
A stasis_message_router is constructed for a particular stasis_topic,
which is subscribes to. Call stasis_message_router_unsubscribe() to
cancel that subscription.
Once constructed, routes can be added using
stasis_message_router_add() (or stasis_message_router_set_default()
for any messages not handled by other routes). There may be only one
route per stasis_message_type. The route's callback is invoked just as
if it were a callback for a subscription; but it only gets called for
messages of the specified type.
(issue ASTERISK-20887)
Review: https://reviewboard.asterisk.org/r/2390/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@383242 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The cache dump mechanism allows the developer to retreive multiple
items of a given type (or of all types) from the cache residing in a
stasis caching topic in addition to the existing single-item cache
retreival mechanism. This also adds to the caching unit tests to
ensure that the new cache dump mechanism is functioning properly.
Review: https://reviewboard.asterisk.org/r/2367/
(issue ASTERISK-21097)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@382705 65c4cc65-6c06-0410-ace0-fbb531ad65f3
For the initial use of this bus, I took some work kmoore did creating
channel snapshots. So rather than create AMI events directly in the
channel code, this patch generates Stasis events, which manager.c uses
to then publish the AMI event.
This message bus provides a generic publish/subscribe mechanism within
Asterisk. This message bus is:
- Loosely coupled; new message types can be added in seperate modules.
- Easy to use; publishing and subscribing are straightforward
operations.
In addition to basic publish/subscribe, the patch also provides
mechanisms for message forwarding, and for message caching.
(issue ASTERISK-20887)
(closes issue ASTERISK-20959)
Review: https://reviewboard.asterisk.org/r/2339/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@382685 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch adds the ability to create a serializer from a thread pool. A
serializer is a ast_taskprocessor with the same contract as a default
taskprocessor (tasks execute serially) except instead of executing out
of a dedicated thread, execution occurs in a thread from a
ast_threadpool. Think of it as a lightweight thread.
While it guarantees that each task will complete before executing the
next, there is no guarantee as to which thread from the pool individual
tasks will execute. This normally only matters if your code relys on
thread specific information, such as thread locals.
This patch also fixes a bug in how the 'was_empty' parameter is computed
for the push callback, and gets rid of the unused 'shutting_down' field.
Review: https://reviewboard.asterisk.org/r/2323/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@381326 65c4cc65-6c06-0410-ace0-fbb531ad65f3
* Made input checking more consistent with other Asterisk code
* Added validation to ast_json_dump_new_file
* Fixed tests for ownereship semantics
(issue ASTERISK-20887)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@381214 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Sorcery is a unifying data access layer which provides a pluggable mechanism to allow
object creation, retrieval, updating, and deletion using different backends (or wizards).
This is a fancy way of saying "one interface to rule them all" where them is configuration,
realtime, and anything else that comes along.
Review: https://reviewboard.asterisk.org/r/2259/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@380069 65c4cc65-6c06-0410-ace0-fbb531ad65f3
* Add a max_size option for threadpools. Also added a test for this option.
* Fixed comments to be more accurate and have fewer typos.
* Updated copyright dates on new files.
git-svn-id: https://origsvn.digium.com/svn/asterisk/team/mmichelson/threadpool@379375 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Now user data is allocated by the creator of the taskprocessor
listener and that user data is passed into ast_taskprocessor_listener_alloc().
Similarly, freeing of the user data is left up to the user himself. He can
free the data when the taskprocessor shuts down, or he can choose to hold
onto it if it makes sense to do so.
This, unsurprisingly, makes threadpool allocation a LOT cleaner now.
git-svn-id: https://origsvn.digium.com/svn/asterisk/team/mmichelson/threadpool@379120 65c4cc65-6c06-0410-ace0-fbb531ad65f3
file:///srv/subversion/repos/asterisk/trunk
................
r378935 | dlee | 2013-01-12 00:43:37 -0600 (Sat, 12 Jan 2013) | 41 lines
Fix XML encoding of 'identity display' in NOTIFY messages.
XML encoding in chan_sip is accomplished by naively building the XML
directly from strings. While this usually works, it fails to take into
account escaping the reserved characters in XML.
This patch adds an 'ast_xml_escape' function, which works similarly to
'ast_uri_encode'. This is used to properly escape the local_display
attribute in XML formatted NOTIFY messages.
Several things to note:
* The Right Thing(TM) to do would probably be to replace the
ast_build_string stuff with building an ast_xml_doc. That's a much
bigger change, and out of scope for the original ticket, so I
refrained myself.
* It is with great sadness that I wrote my own ast_xml_escape
function. There's one in libxml2, but it's knee-deep in
libxml2-ness, and not easily used to one-off escape a
string.
* I only escaped the string we know is causing problems
(local_display). At least some of the other strings are
URI-encoded, which should be XML safe. Rather than figuring out
what's safe and escaping what's not, it would be much cleaner to
simply build an ast_xml_doc for the messages and let the XML
library do the XML escaping. Like I said, that's out of scope.
(closes issue ABE-2902)
Reported by: Guenther Kelleter
Tested by: Guenther Kelleter
Review: http://reviewboard.digium.internal/r/365/
........
Merged revision 378919 from https://origsvn.digium.com/svn/asterisk/be/branches/C.3-bier
........
Merged revisions 378933 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 378934 from http://svn.asterisk.org/svn/asterisk/branches/11
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/team/mmichelson/threadpool@378946 65c4cc65-6c06-0410-ace0-fbb531ad65f3
file:///srv/subversion/repos/asterisk/trunk
................
r378915 | dlee | 2013-01-11 16:31:42 -0600 (Fri, 11 Jan 2013) | 21 lines
Add JSON API for Asterisk.
This provides a JSON API by pulling in and wrapping the Jansson JSON
library[1]. The Asterisk API basically mirrors the Jansson
functionality, with a few minor tweaks.
* Some names have been asteriskified to protect the innocent.
* Jansson provides both reference-stealing and reference-borrowing
versions of several API's. The Asterisk API is exclusively
reference-stealing for operations that put elements into arrays and
objects.
* No support for doubles, since we usually don't need that.
* Coming along for the ride is the ast_test_validate macro, which made
the unit tests much easier to write.
[1]: http://www.digip.org/jansson/
(issue ASTERISK-20887)
(closes issue ASTERISK-20888)
Review: https://reviewboard.asterisk.org/r/2264/
................
r378918 | file | 2013-01-11 17:05:38 -0600 (Fri, 11 Jan 2013) | 11 lines
Retain XMPP filters across reconnections so external modules continue to function as expected.
Previously if an XMPP client reconnected any filters added by an external module were lost.
This issue exhibited itself with chan_motif not receiving and reacting to Jingle signaling.
(closes issue ASTERISK-20916)
Reported by: kuj
........
Merged revisions 378917 from http://svn.asterisk.org/svn/asterisk/branches/11
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/team/mmichelson/threadpool@378927 65c4cc65-6c06-0410-ace0-fbb531ad65f3
* Remove extraneous whitespace
* Bump up debug levels of messages and add identifying info to messages.
* Account for potential failures of ao2_link()
* Add additional test and some more test data
* Add some comments in places where they could be useful
* Make threadpool listeners and their callbacks optional
git-svn-id: https://origsvn.digium.com/svn/asterisk/team/mmichelson/threadpool@378652 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Unfortunately, this required a taskprocessor listener change that makes listener allocation
utterly silly. I'm going to change the scheme so that allocation of taskprocessor listeners
is done internally within taskprocessor code. This will make it parallel with threadpool
code, which is a good thing.
git-svn-id: https://origsvn.digium.com/svn/asterisk/team/mmichelson/threadpool@377687 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The only test added so far is an idle thread timeout
option. This will greatly aid threadpool users who wish
to maintain a threadpool by allowing for idle threads to
die out as necessary.
Test passes.
git-svn-id: https://origsvn.digium.com/svn/asterisk/team/mmichelson/threadpool@377580 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This helps tests to pass more often than before.
They are far less likely to queue extra processes
into the control taskprocessor since they are prevented
once the threadpool begins to shut down.
git-svn-id: https://origsvn.digium.com/svn/asterisk/team/mmichelson/threadpool@377578 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This one involves shrinking the threadpool in such
a way that both idle and active threads are affected.
This test made me re-realize why the zombie state exists,
so I re-added it. We don't want to clog up the control
taskprocessor by waiting on active threads to complete
what they are doing. Instead, we mark them as zombies so
that when they are done, they can clean themselves up
properly.
Without the zombie state available, the new test actually
will deadlock.
git-svn-id: https://origsvn.digium.com/svn/asterisk/team/mmichelson/threadpool@377474 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The new thread creation test fails because Asterisk locks up
while trying to lock a taskprocessor.
While trying to debug that, I found a race condition during taskprocessor
creation where a default taskprocessor listener could try to operate on
a partially started taskprocessor. This was fixed by adding a new callback
to taskprocessor listeners.
Then while testing that change, I found some bugs in the taskprocessor
tests where I was not properly unlocking when done with a lock. Scoped
locks have spoiled me a bit.
I still have not figured out why the threadpool thread creation test
is locking up.
git-svn-id: https://origsvn.digium.com/svn/asterisk/team/mmichelson/threadpool@377368 65c4cc65-6c06-0410-ace0-fbb531ad65f3
file:///srv/subversion/repos/asterisk/trunk
........
r376575 | rmudgett | 2012-11-21 12:33:16 -0600 (Wed, 21 Nov 2012) | 20 lines
Add red-black tree container type to astobj2.
* Add red-black tree container type.
* Add CLI command "astobj2 container dump <name>"
* Added ao2_container_dump() so the container could be dumped by other
modules for debugging purposes.
* Changed ao2_container_stats() so it can be used by other modules like
ao2_container_check() for debugging purposes.
* Updated the unit tests to check red-black tree containers.
(closes issue ASTERISK-19970)
Reported by: rmudgett
Tested by: rmudgett
Review: https://reviewboard.asterisk.org/r/2110/
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/team/mmichelson/threadpool@376580 65c4cc65-6c06-0410-ace0-fbb531ad65f3
file:///srv/subversion/repos/asterisk/trunk
........
r376457 | mjordan | 2012-11-18 20:14:54 -0600 (Sun, 18 Nov 2012) | 7 lines
Fix uninitialized in this function error
With some versions of gcc, n_buckets will be flagged as being uninitialized
before use. While its technically impossible (since the switch statement,
even without a default, accounts for all possibilities), we'll initialize the
variable to 0 anyway.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/team/mmichelson/threadpool@376462 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This helps account for the fact that it is unknown just
how many references may exist for a given taskprocessor
listener, so simply unreffing it from the taskprocessor
shutdown function is not enough to convey the gravity
of the situation.
By putting in a shutdown callback, it now becomes clear
to the listener not to try to do any further operations
on the taskprocessor.
git-svn-id: https://origsvn.digium.com/svn/asterisk/team/mmichelson/threadpool@376381 65c4cc65-6c06-0410-ace0-fbb531ad65f3
file:///srv/subversion/repos/asterisk/trunk
................
r376341 | dlee | 2012-11-15 18:08:00 -0600 (Thu, 15 Nov 2012) | 34 lines
Migrate hashtest/hashtest2 to be unit tests.
Both hashtest and hashtest2 are manual testing apps that thrash hash
tables (hashtab and ao2 containers, respectively), by spinning up
several threads that randomly insert, delete, lookup and iterate over
the hash table. If the app doesn't crash, the hash table probably passes
the test. Those utils are not a part of the typical Asterisk build, so
they do not usually get compiled. This all makes them less that useful.
This patch removes those manual test programs and replaces them with
Asterisk unit test modules (test_{hashtab,astobj2}_thrash.so). It also
attempts to make the tests more deterministic.
* Rather than spinning up some number of threads that operate on the
hash table randomly, spin up four threads that concurrenly add,
remove, lookup and iterate over the hash table.
* Each thread checks the state of the hash table both during and after
execution, and indicates a test failure if things are not as expected.
* Each thread times out after 60 seconds to prevent deadlocking the unit
test run.
(closes issue ASTERISK-20505)
Reported by: Matt Jordan
Review: https://reviewboard.asterisk.org/r/2189/
........
Merged revisions 376306 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 376315 from http://svn.asterisk.org/svn/asterisk/branches/10
........
Merged revisions 376339 from http://svn.asterisk.org/svn/asterisk/branches/11
................
r376344 | dlee | 2012-11-15 18:14:00 -0600 (Thu, 15 Nov 2012) | 1 line
Somehow I put in svn-1.6 merge information. Oops.
................
r376345 | dlee | 2012-11-15 18:15:30 -0600 (Thu, 15 Nov 2012) | 15 lines
Fixed extconf.c breakage introduced in r376306.
To quote wdoekes:
> Note that I'm not confirming legitimacy of having that file in tree at
> all. Is anyone using aelparse/conf2ael?
........
Merged revisions 376340 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 376342 from http://svn.asterisk.org/svn/asterisk/branches/10
........
Merged revisions 376343 from http://svn.asterisk.org/svn/asterisk/branches/11
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/team/mmichelson/threadpool@376352 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Update title that was left behind many years ago. Used revision 6596 as my guide for what it should be.
(issue ASTERISK-20259)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@375007 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Greenlight in #asterisk brought up that he was receiving an error message "Could
not create persistent member string, out of space" when running app_queue in
Asterisk 10. dump_queue_members() made an assumption that 8K would be enough to
store the generated string, but with queues that have large member lists this is
not always the case. This patch removes the limitation and uses ast_str instead
of a fixed sized buffer.
The complicating factor comes from the fact that ast_db_get requires a buffer
and buffer size argument, which doesn't let us pull back more than what we pass
in, so I introduced a new ast_db_get_allocated() which returns an ast_strdup()'d
copy of the value from astdb.
As an aside, I did some testing on the maximum size of data that we can store in
the BDB library we distribute and was able to store a 10MB string and retrieve
it with no problems, so I feel this is a safe patch.
Review: https://reviewboard.asterisk.org/r/2136/
........
Merged revisions 374108 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 374135 from http://svn.asterisk.org/svn/asterisk/branches/10
........
Merged revisions 374150 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@374151 65c4cc65-6c06-0410-ace0-fbb531ad65f3
* Whitespace, doc-blocks, spelling, case, missing and incorrect tags.
* Add cleanup to Makefile for the Doxygen configuration update
* Start updating Doxygen configuration for cleaner output
* Enable inclusion of configuration files into documentation
* remove mantisworkflow...
* update documentation README
* Add markup to Tilghman's email and talk with him about updating his email, he knows...
* no code changes on this commit other than the mentioned Makefile change
(issue ASTERISK-20259)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@373384 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The new API allows for sorted containers, insertion options, duplicate
handling options, and traversal order options.
* Adds the ability for containers to be sorted when they are created.
* Adds container creation options to handle duplicates when they are
inserted.
* Adds container creation option to insert objects at the beginning or end
of the container traversal order.
* Adds OBJ_PARTIAL_KEY to allow searching with a partial key. The partial
key works similarly to the OBJ_KEY flag. (The real search speed
improvement with this flag will come when red-black trees are added.)
* Adds container traversal and iteration order options: Ascending and
Descending.
* Adds an AST_DEVMODE compile feature to check the stats and integrity of
registered containers using the CLI "astobj2 container stats <name>" and
"astobj2 container check <name>". The channels container is normally
registered since it is one of the most important containers in the system.
* Adds ao2_iterator_restart() to allow iteration to be restarted from the
beginning.
* Changes the generic container object to have a v_method table pointer to
support other types of containers.
* Changes the container nodes holding objects to be ref counted.
The ref counted nodes and v_method table pointer changes pave the way to
allow other types of containers.
* Includes a large astobj2 unit test enhancement that tests the new
features.
(closes issue ASTERISK-19969)
Reported by: rmudgett
Review: https://reviewboard.asterisk.org/r/2078/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@372997 65c4cc65-6c06-0410-ace0-fbb531ad65f3
One of my recent commits broke this test. The error was:
[test_event.c:event_new_test:214]: Events expected to be identical
have different size: 69 != 59
The difference in size occurred because the first event had
the EID IE added to the event twice. ast_event_new() now always
adds it automatically. Previously it only added it if there
were no IEs specified, which was kind of weird.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@370541 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Revision 370426 introduced the use of a nested function in tests/test_acl.c,
but the lack of the 'auto' scope specifier on the function and a forward
declaration resulted in compilation errors on the automated test systems.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@370453 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Rules in ACLs (specified using 'permit' and 'deny') can now contain multiple
items (separated by commas), and items in the rule can be negated by prefixing
them with '!'. This simplifies Asterisk Realtime configurations, since it is no
longer necessray to control the order that the 'permit' and 'deny' columns are
returned from queries.
Review: https://reviewboard.asterisk.org/r/1592/
Initial patch contributed by Tilghman Lesher
Unit tests written by Kevin P. Fleming
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@370426 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch includes the following:
* Unit tests for the abstract Jitter Buffer API. This includes both fixed
and adaptive flavors, testing nominal creation, frame input, frame retrieval,
resyncing; off nominal frame input overflow, out of order, and others.
* Tweaks to the abstract_jb API to remove the unnecessary resync_threshold
parameter from the create function (resync_threshold is already in the
struct passed into the create function)
* Ensure the fixed jitter buffer is empty before destroying it, to avoid an
ASSERT
* Don't "resync" the adaptive jitter buffer. The mechanism that was being
used actually causes the jitter buffer to think its being overflowed by going
around the jitterbuf API and attempting to 'resynch' it improperly. If a
resync is needed, the jitter buffer will do it properly by itself. Note that
this is only an optimization needed for trunk, as the worst that happens is
the loss of three voice packets before the adaptive jitter buffer will resync
anyway.
Review: https://reviewboard.asterisk.org/r/2035
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@370387 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Allows the setting of flags via the config options api.
For example, code like this:
#define OPT1 1 << 0
#define OPT2 1 << 1
#define OPT3 1 << 2
struct thing {
unsigned int flags;
};
and a config like this:
[blah]
opt1=yes
opt2=no
opt3=yes
Review: https://reviewboard.asterisk.org/r/2004/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@369454 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Added documentation describing what flags and arguments to pass to
aco_option_register for default option types. Also changed the ACL
handler to use the flags parameter to differentiate between "permit"
and "deny" instead of adding an additional vararg parameter.
Review: https://reviewboard.asterisk.org/r/1969/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@368663 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Presence support has been added. This is accomplished by
allowing for presence hints in addition to device state
hints. A dialplan function called PRESENCE_STATE has been
added to allow for setting and reading presence. Presence
can be transmitted to Digium phones using custom XML
elements in a PIDF presence document.
Voicemail has new APIs that allow for moving, removing,
forwarding, and playing messages. Messages have had a new
unique message ID added to them so that the APIs will work
reliably. The state of a voicemail mailbox can be obtained
using an API that allows one to get a snapshot of the mailbox.
A voicemail Dialplan App called VoiceMailPlayMsg has been
added to be able to play back a specific message.
Configuration hooks have been added. Configuration hooks
allow for a piece of code to be executed when a specific
configuration file is loaded by a specific module. This is
useful for modules that are dependent on the configuration
of other modules.
chan_sip now has a public method that allows for a custom
SIP INFO request to be sent mid-dialog. Digium phones use
this in order to display progress bars when files are played.
Messaging support has been expanded a bit. The main
visible difference is the addition of an AMI action
MessageSend.
Finally, a ParkingLots manager action has been added in order
to get a list of parking lots.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@368435 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The security events framework API was changed in Asterisk 10 but the unit tests
were not updated at the same time.
This patch does the following:
* Adds two more security events that were added to the API
* Add challenge, received_challenge and received_hash in the inval_password
security event unit test
(Closes issue ASTERISK-19760)
Reported by: Michael L. Young
Tested by: Michael L. Young
Patches:
issue-asterisk-19760-trunk.diff uploaded by Michael L. Young (license 5026)
Review: https://reviewboard.asterisk.org/r/1897/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@365248 65c4cc65-6c06-0410-ace0-fbb531ad65f3
........
r364365 | twilson | 2012-04-27 17:31:01 -0500 (Fri, 27 Apr 2012) | 11 lines
Fix ast_parse_arg numeric type range checking and add tests
ast_parse_arg wasn't checking for strto* parse errors or limiting
the results by the actual range of the numeric types. This patch fixes
that and adds unit tests as well.
Review: https://reviewboard.asterisk.org/r/1879/
........
Merged revisions 364340 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
r364369 | twilson | 2012-04-27 17:33:10 -0500 (Fri, 27 Apr 2012) | 2 lines
Add missing test_config.c
........
Merged revisions 364365,364369 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@364397 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The Security Events Framework API changed in trunk to support IPv6. This broke
the building of the security events test which was based around IPv4. This
patches fixes the build by changing the test to conform to the new changes.
(related to issue ASTERISK-19447)
Review: https://reviewboard.asterisk.org/r/1874/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@362432 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Global ao2 objects must always exist after initialization because there is
no access control to obtain another reference to the global object.
It is expected that module configuration could use these new API calls to
replace an active configuration parameter object with an updated
configuration parameter object.
With these new API calls, the global object could be replaced, removed, or
referenced without the risk of someone using a stale global object
pointer.
Review: https://reviewboard.asterisk.org/r/1824/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@360627 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch adds unit tests for main/jitterbuf.c. This includes checking for
the following:
* Nominal insertion and retrieval of frames
* Insertion and retrieval of frames where the frames are inserted out of
order with respect to the previous frame
* Insertion and retrieval of frames where some number of frames that would
occur in the expected sequence are instead dropped
* Insertion and retrieval of frames with an arrival time that does not occur
at the same rate as the surrounding frames
* Resynchronization of the jitter buffer when an inserted frame breaks the
resynchronization threshold
* Overfilling of the jitter buffer
For each of the tests, both JB_TYPE_VOICE and JB_TYPE_CONTROL permutations
exist.
Review: https://reviewboard.asterisk.org/r/1815
(issue: ASTERISK-18964)
Reported by: Kris Shaw
Tested by: Kris Shaw, Matt Jordan
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@359406 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This change restores functionality that was present in 1.4, when AEL macros
were implemented with the Macro dialplan application. Macros are fraught with
functionality issues, because they consume a large portion of the underlying
application stack. This limits the ability of AEL users to call many layers
of subroutines, an issue which Gosub does not have (originally tested to
100,000 levels deep). Therefore, starting in 1.6.0, AEL macros were
implemented with Gosub.
However, there were some implicit behaviors of Macro, which were not replicated
at the same time as with the transition to Gosub, one of which is documented in
the related issue. In particular, the "h" extension is designed to execute not
in the Macro context, but in the topmost calling context. Due to legacy issues
with a misapplied bugfix many years ago, when a macro exited in 1.4, it looks
in all calling contexts, bubbling up from the deepest level until it finds an
"h" extension.
Since AEL hides the complexity of the underlying dialplan logic from the AEL
programmer, it's reasonable to assume that this behavior should not change in
the transition from Asterisk 1.4 LTS to Asterisk 1.8 LTS, lest we break
working AEL configurations in the transition to Asterisk 1.8 LTS. This fix
is the result, which implements a search for the "h" extension in all calling
Gosub contexts.
Fixes ASTERISK-19336
Patch: 20120308__ael_bugfix_for_trunk__2.diff (License #5003) by Tilghman Lesher
(with slight modifications for 1.8)
Tested by: Johan Wilfer
Review: https://reviewboard.asterisk.org/r/1776/
........
Merged revisions 358810 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 358811 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@358812 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This change fixes case-sensitivity for device-specific subscriptions such that
the technology identifier is case-insensitive while the remainder of the device
string is still case-sensitive. This should also preserve the original case of
the device string as passed in to the event system. CCSS is the only feature
affected as it is the only consumer of device-specific event subscriptions.
The second part of this patch addresses similar case-sensitivity issues within
CCSS itself that prevented it from functioning correctly after the fix to the
events system.
This adds a unit test to verify that the event system works as expected.
(closes issue ASTERISK-19422)
Review: https://reviewboard.asterisk.org/r/1780/
........
Merged revisions 357940 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 357941 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@357942 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Occasionally there is a need to put all objects in one container also into
another container.
Some reasons you might need to do this:
1) You need to reconfigure a container. You would do this by creating a
new container with the new configuration and ao2_container_dup the old
container into it. Then replace the old container with the new. Then
destroy the old container.
2) You need the contents of a container to remain stable while operating
on all of the objects. You would do this by creating a cloned container
of the original with ao2_container_clone. The cloned container is a
snapshot of the objects at the time of the cloning. When done, just
destroy the cloned container.
Review: https://reviewboard.asterisk.org/r/1746/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@357145 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Update the doubly linked list implementation. Now safe traversing can
insert before and after the current node when traversing in either
direction.
Updated the linked lists unit test test_linkedlist to also test doubly
linked lists. The old test_dlinkedlist requires a manual check of results
and probably should be removed.
Review: https://reviewboard.asterisk.org/r/1569/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@347110 65c4cc65-6c06-0410-ace0-fbb531ad65f3
AST_LIST_INSERT_BEFORE_CURRENT() could not be used twice in an iteration
or before AST_LIST_REMOVE_CURRENT() without corrupting the list.
AST_LIST_INSERT_BEFORE_CURRENT() could also corrupt the list if
AST_LIST_INSERT_BEFORE_CURRENT() or AST_LIST_REMOVE_CURRENT() is used on
the next iteration.
* Fixed cut and paste error using the wrong variable in
AST_LIST_INSERT_BEFORE_CURRENT().
* Added linked list unit tests for AST_LIST_INSERT_BEFORE_CURRENT(),
AST_LIST_APPEND_LIST(), and AST_LIST_INSERT_LIST_AFTER().
........
Merged revisions 342661 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 342662 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@342663 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/10
................
r337974 | rmudgett | 2011-09-26 14:35:23 -0500 (Mon, 26 Sep 2011) | 37 lines
Merged revisions 337973 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r337973 | rmudgett | 2011-09-26 14:30:39 -0500 (Mon, 26 Sep 2011) | 30 lines
Fix deadlock when using dummy channels.
Dummy channels created by ast_dummy_channel_alloc() should be destoyed by
ast_channel_unref(). Using ast_channel_release() needlessly grabs the
channel container lock and can cause a deadlock as a result.
* Analyzed use of ast_dummy_channel_alloc() and made use
ast_channel_unref() when done with the dummy channel. (Primary reason for
the reported deadlock.)
* Made app_dial.c:dial_exec_full() not call ast_call() holding any channel
locks. Chan_local could not perform deadlock avoidance correctly.
(Potential deadlock exposed by this issue. Secondary reason for the
reported deadlock since the held lock was part of the deadlock chain.)
* Fixed some uses of ast_dummy_channel_alloc() not checking the returned
channel pointer for failure.
* Fixed some potential chan=NULL pointer usage in func_odbc.c. Protected
by testing the bogus_chan value.
* Fixed needlessly clearing a 1024 char auto array when setting the first
char to zero is enough in manager.c:action_getvar().
(closes issue ASTERISK-18613)
Reported by: Thomas Arimont
Patches:
jira_asterisk_18613_v1.8.patch (license #5621) patch uploaded by rmudgett
Tested by: Thomas Arimont
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@337975 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/10
................
r337062 | kmoore | 2011-09-20 16:05:01 -0500 (Tue, 20 Sep 2011) | 18 lines
Merged revisions 337061 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r337061 | kmoore | 2011-09-20 16:04:11 -0500 (Tue, 20 Sep 2011) | 11 lines
Make CANMATCH with the new pattern match engine behave more like the old one
When checking an extension for E_CANMATCH using the new extension matching
algorithm, an exact match was not returned as a possible match resulting in the
queue failing to allow a caller to exit on DTMF. This removes the requirement
that an extension be longer than acquired digits for an E_CANMATCH operation
to succeed.
(closes issue ASTERISK-18044)
Review: https://reviewboard.asterisk.org/r/1367/
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@337063 65c4cc65-6c06-0410-ace0-fbb531ad65f3
There is a fairly common pattern making its way through the code base where we
put a temporary object on the stack so we can call ao2_find() with OBJ_POINTER.
The purpose is so that it can be passed into the object hash function.
However, this really seems like a hack and potentially error prone. This patch
is a first stab at approach to avoid having to do that.
It adds a new flag, OBJ_KEY, which can be used instead of OBJ_POINTER in these
situations. Then, the hash function can know whether it was given an object or
some custom data to hash.
The patch also changes some uses of ao2_find() for iax2_user and iax2_peer
objects to reflect how OBJ_KEY would be used.
So long, and thanks for all the fish.
Review: https://reviewboard.asterisk.org/r/1184/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@330273 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r327793 | tilghman | 2011-07-12 10:35:46 -0500 (Tue, 12 Jul 2011) | 14 lines
Use 'printf' (POSIX issue 4) instead of 'echo -n', for portability.
The problem with using 'echo -n' is that it is not portable. While BSD systems
required that the '-n' option be removed and interpreted, System V required
that all strings should be echoed with no interpretation of options. This
fundamental difference of behavior means that it is never possible to use the
'-n' flag to echo in tests which are meant to be portable.
In this case, on Mac OS X 10.6, the /bin/sh shell builtin 'echo' uses the
System V semantics of the command, and thus the SHELL test failed on that
platform.
http://pubs.opengroup.org/onlinepubs/009695399/utilities/echo.html#tag_04_41_16
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@327794 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r327106 | mnicholson | 2011-07-08 14:52:51 -0500 (Fri, 08 Jul 2011) | 11 lines
Reset our ast_str before passing it on to dialplan function backends.
It is possible for a dialplan backend to not modify the given buffer or ast_str
and still return success. This causes any previous value stored in the buffer
to be used as if the new function call provided it. Some functions also append
to the given buffer assuming it is empty.
The test_substitution unit test has also been modified to detect this problem.
(closes issue ASTERISK-17878)
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@327107 65c4cc65-6c06-0410-ace0-fbb531ad65f3
There were some bugs in the very ancient version of Berkeley DB that Asterisk
used. Instead of spending the time tracking down the bugs in the Berkeley code
we move to the much better documented SQLite 3.
Conversion of the old astdb happens at runtime by running the included
astdb2sqlite3 utility. The ast_db API with SQLite 3 backend should behave
identically to the old Berkeley backend, but in the future we could offer a
much more robust interface.
We do not include the SQLite 3 library in the source tree, but instead rely
upon the distribution-provided libraries. SQLite is so ubiquitous that this
should not place undue burden on administrators.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@326589 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r324557 | twilson | 2011-06-22 22:10:38 -0500 (Wed, 22 Jun 2011) | 5 lines
Remove tests for parsing address with invalid port
getaddrinfo on OS X returns with EAI_NONAME error when passed a port
greater than 65535. Linux throws no error, so remove the tests for now.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@324558 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r324484 | twilson | 2011-06-22 13:52:04 -0500 (Wed, 22 Jun 2011) | 20 lines
Stop sending IPv6 link-local scope-ids in SIP messages
The idea behind the patch listed below was used, but in a more targeted manner.
There are now address stringification functions for addresses that are meant to
be sent to a remote party. Link-local scope-ids only make sense on the machine
from which they originate and so are stripped in the new functions.
There is also a host sanitization function added to chan_sip which is used
for when peer and dialog tohost fields or sip_registry hostnames are used to
craft a SIP message.
Also added are some basic unit tests for netsock2 address parsing.
(closes issue ASTERISK-17711)
Reported by: ch_djalel
Patches:
asterisk-1.8.3.2-ipv6_ll_scope.patch uploaded by ch_djalel (license 1251)
Review: https://reviewboard.asterisk.org/r/1278/
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@324487 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r323669 | rmudgett | 2011-06-15 11:43:18 -0500 (Wed, 15 Jun 2011) | 21 lines
[regression] Voicemail MWI is no longer sent.
When leaving a voicemail, the MWI message is never sent. The same thing
happens when checking a voicemail and marking it as read.
If you restart Asterisk, everything comes up at that state correctly, but
changes to the messages in voicemail causes the light to not be set
appropriately. Very easy to reproduce.
* Made ast_event_check_subscriber() return TRUE if there are ANY
subscribers to an event type when there are no restricting ie values
passed. This allows an event being queued to be queued.
(closes issue ASTERISK-18002)
Reported by: lmadsen
Tested by: lmadsen, irroot
Patches:
jira_asterisk_18002_v1.8.patch uploaded by rmudgett (License #5621)
(closes issue ASTERISK-18019)
........
r323670 | rmudgett | 2011-06-15 11:43:31 -0500 (Wed, 15 Jun 2011) | 7 lines
Add a test to the event unit tests to catch ASTERISK-18002.
The new tests check to see if there are ANY subscribers to the event type
when ast_event_check_subscriber() is not passed any specific ie values.
(issue ASTERISK-18002)
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@323671 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r321871 | rmudgett | 2011-06-03 15:58:13 -0500 (Fri, 03 Jun 2011) | 27 lines
Event subscription fixes.
Must commit the subscription fixes together with the integration
subscription tests. The subscription fixes cause an erroneously passing
test to fail. The new subscription tests detect errors without the
subscription fixes.
* Added missing event_names[] table entry.
* Reworked ast_event_check_subscriber()/match_sub_ie_val_to_event() to
correctly detect if a subscriber exists for the proposed event.
* Made match_ie_val() and match_sub_ie_val_to_event() check the buffer
length for RAW payload types.
* Fixed error handling memory leak in ast_event_sub_activate(),
ast_event_unsubscribe(), and ast_event_queue().
* Made ast_event_new() and ast_event_check_subscriber() better protect
themselves from an invalid payload type.
* Added container lock protection between removing old cache events and
adding the new cached event in
ast_event_queue_and_cache()/event_update_cache().
* Added new event subscription tests.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@321872 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch is the foundation of an entire new way of looking at media in Asterisk.
The code present in this patch is everything required to complete phase1 of my
Media Architecture proposal. For more information about this project visit the link below.
https://wiki.asterisk.org/wiki/display/AST/Media+Architecture+Proposal
The primary function of this patch is to convert all the usages of format
bitfields in Asterisk to use the new format and format_cap APIs. Functionally
no change in behavior should be present in this patch. Thanks to twilson
and russell for all the time they spent reviewing these changes.
Review: https://reviewboard.asterisk.org/r/1083/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@306010 65c4cc65-6c06-0410-ace0-fbb531ad65f3
For each component, the set of valid BNF expansions defines exactly
which characters may appear unescaped. All other characters MUST be
escaped.
This patch modifies ast_uri_encode() to encode strings in line with this recommendation. This patch also adds an ast_escape_quoted() function which escapes '"' and '\' characters in quoted strings in accordance with section 25.1 of RFC 3261. The ast_uri_encode() function has also been modified to take an ast_flags struct describing the set of rules it should use when escaping characters to allow for it to escape SIP URIs in addition to HTTP URIs and other types of URIs or variations of those two URI types in the future.
The ast_uri_decode() function has also been modified to accept an ast_flags struct describing the set of rules to use when decoding to enable decoding '+' as ' ' in legacy http URLs.
The unit tests for these functions have also been updated.
ABE-2705
Review: https://reviewboard.asterisk.org/r/1081/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@303509 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Previously, I had added the ast_sched_thread stuff that was a generic scheduler
thread implementation. However, if you used it, it required using different
functions for modifying scheduler contents. This patch reworks how this is
done and just allows you to optionally start a thread on the original scheduler
context structure that has always been there. This makes it trivial to switch
to the generic scheduler thread implementation without having to touch any of
the other code that adds or removes scheduler entries.
In passing, I made some naming tweaks to add ast_ prefixes where they were not
there before.
Review: https://reviewboard.asterisk.org/r/1007/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@299091 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r292741 | mmichelson | 2010-10-22 12:09:52 -0500 (Fri, 22 Oct 2010) | 12 lines
Prevent multiple runs of event_sub_test from producing false failure results.
The array of test subscriptions was declared "static," meaning that the
data.count field would retain its value between runs of the test. After the
first test run, this would result in false reports of test failures.
I chose to just remove the "static" keyword from the structure since it's not
a huge deal to construct this structure during each run of the test. Another
alternative would have been to zero out the data.count fields of each test
subscription instead.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@292742 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
................
r285931 | tilghman | 2010-09-09 20:25:50 -0500 (Thu, 09 Sep 2010) | 21 lines
Merged revisions 285930 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
................
r285930 | tilghman | 2010-09-09 20:16:32 -0500 (Thu, 09 Sep 2010) | 14 lines
Merged revisions 285889 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r285889 | tilghman | 2010-09-09 19:13:45 -0500 (Thu, 09 Sep 2010) | 7 lines
Fix Mac OS X build.
This also fixes a rather grievous calculation error for the offset of
ast_fdset, which was masked on Linux and FreeBSD, because these platforms
check the first 256 FDs regardless of the bitmask setting (due to backwards
compatibility).
........
................
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@285932 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The ACL test was failing on Mac OS X because it would
convert the above invalid link-local address into
fe80::1234 while reporting no error from getaddrinfo().
Linux does not do this.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@277872 65c4cc65-6c06-0410-ace0-fbb531ad65f3
ACLs can now be configured to match IPv6 networks. This is only
relevant for ACLs in chan_sip for now since other channel drivers
do not support IPv6 addressing. However, once those channel drivers
are outfitted to support IPv6 addressing, the ACLs will already be
ready for IPv6 support.
https://reviewboard.asterisk.org/r/791
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@277814 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The purpose of this patch is to eliminate struct ast_callerid since it has
turned into a miscellaneous collection of various party information.
Eliminate struct ast_callerid and replace it with the following struct
organization:
struct ast_party_name {
char *str;
int char_set;
int presentation;
unsigned char valid;
};
struct ast_party_number {
char *str;
int plan;
int presentation;
unsigned char valid;
};
struct ast_party_subaddress {
char *str;
int type;
unsigned char odd_even_indicator;
unsigned char valid;
};
struct ast_party_id {
struct ast_party_name name;
struct ast_party_number number;
struct ast_party_subaddress subaddress;
char *tag;
};
struct ast_party_dialed {
struct {
char *str;
int plan;
} number;
struct ast_party_subaddress subaddress;
int transit_network_select;
};
struct ast_party_caller {
struct ast_party_id id;
char *ani;
int ani2;
};
The new organization adds some new information as well.
* The party name and number now have their own presentation value that can
be manipulated independently. ISDN supplies the presentation value for
the name and number at different times with the possibility that they
could be different.
* The party name and number now have a valid flag. Before this change the
name or number string could be empty if the presentation were restricted.
Most channel drivers assume that the name or number is then simply not
available instead of indicating that the name or number was restricted.
* The party name now has a character set value. SIP and Q.SIG have the
ability to indicate what character set a name string is using so it could
be presented properly.
* The dialed party now has a numbering plan value that could be useful to
have available.
The various channel drivers will need to be updated to support the new
core features as needed. They have simply been converted to supply
current functionality at this time.
The following items of note were either corrected or enhanced:
* The CONNECTEDLINE() and REDIRECTING() dialplan functions were
consolidated into func_callerid.c to share party id handling code.
* CALLERPRES() is now deprecated because the name and number have their
own presentation values.
* Fixed app_alarmreceiver.c write_metadata(). The workstring[] could
contain garbage. It also can only contain the caller id number so using
ast_callerid_parse() on it is silly. There was also a typo in the
CALLERNAME if test.
* Fixed app_rpt.c using ast_callerid_parse() on the channel's caller id
number string. ast_callerid_parse() alters the given buffer which in this
case is the channel's caller id number string. Then using
ast_shrink_phone_number() could alter it even more.
* Fixed caller ID name and number memory leak in chan_usbradio.c.
* Fixed uninitialized char arrays cid_num[] and cid_name[] in
sig_analog.c.
* Protected access to a caller channel with lock in chan_sip.c.
* Clarified intent of code in app_meetme.c sla_ring_station() and
dial_trunk(). Also made save all caller ID data instead of just the name
and number strings.
* Simplified cdr.c set_one_cid(). It hand coded the ast_callerid_merge()
function.
* Corrected some weirdness with app_privacy.c's use of caller
presentation.
Review: https://reviewboard.asterisk.org/r/702/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@276347 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Asterisk Generic AOC Representation
- Generic AOC encode/decode routines.
(Generic AOC must be encoded to be passed on the wire in the AST_CONTROL_AOC frame)
- AST_CONTROL_AOC frame type to represent generic encoded AOC data
- Manager events for AOC-S, AOC-D, and AOC-E messages
Asterisk App Support
- app_dial AOC-S pass-through support on call setup
- app_queue AOC-S pass-through support on call setup
AOC Unit Tests
- AOC Unit Tests for encode/decode routines
- AOC Unit Test for manager event representation.
SIP AOC Support
- Pass-through of generic AOC-D and AOC-E messages to snom phones via the
snom AOC specification.
- Creation of chan_sip page3 flags for the addition of the new
'snom_aoc_enabled' sip.conf option.
IAX AOC Support
- Natively supports AOC pass-through through the use of the new
AST_CONTROL_AOC frame type
DAHDI AOC Support
- ETSI PRI full AOC Pass-through support
- 'aoc_enable' chan_dahdi.conf option for independently enabling
pass-through of AOC-S, AOC-D, AOC-E.
- 'aoce_delayhangup' option for retrieving AOC-E on disconnect.
- DAHDI A() dial string option for requesting AOC services.
example usage:
;requests AOC-S, AOC-D, and AOC-E on call setup
exten=>1111,1,Dial(DAHDI/g1/1112/A(s,d,e))
Review: https://reviewboard.asterisk.org/r/552/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@267096 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This will save a considerable amount of CPU on the BSDs, including Mac OS X,
as it eliminates several places in the code that we previously used a busy
loop. Additionally, this adds a res_timing interface, using kqueue timers.
Review: https://reviewboard.asterisk.org/r/543/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@262852 65c4cc65-6c06-0410-ace0-fbb531ad65f3
I modified the original patch for trunk to use the unit test API.
(issue #17277)
Reported by: cappucinoking
Patches:
test_heap.diff uploaded by cappucinoking (license 1036)
Tested by: cappucinoking, russell
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@261500 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch introduces another test in test_event.c that exercises most of the
subscription related ast_event API calls. I made some minor additions to the
existing event allocation test to increase API coverage by the test code.
Finally, I made a list in a comment of API calls not yet touched by the test
module as a to-do list for future test development.
During the development of this test code, I discovered a number of bugs in
the event API.
1) subscriptions to AST_EVENT_ALL were not handled appropriately in a couple
of different places. The API allows a subscription to all event types,
but with IE parameters, just as if it was a subscription to a specific
event type. However, the parameters were being ignored. This affected
ast_event_check_subscriber() and event distribution to subscribers.
2) Some of the logic in ast_event_check_subscriber() for checking subscriptions
against query parameters was wrong.
Review: https://reviewboard.asterisk.org/r/617/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@258632 65c4cc65-6c06-0410-ace0-fbb531ad65f3
There are two unit tests contained here.
1. "Invalid ACL" This attempts to read a bunch of badly formatted ACL entries
and add them to a host access rule. The goal of this test is to be sure that
all invalid entries are rejected as they should be.
2. "ACL" This sets up four ACLs. One is a permit all, one is a deny all, and
the other two have specific rules about which subnets are allowed and which
are not. Then a set of test addresses is used to determine whether we would
allow those addresses to access us when each ACL is applied. This test, by the
way, was what resulted in AST-2010-003's creation.
Review: https://reviewboard.asterisk.org/r/532
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@254557 65c4cc65-6c06-0410-ace0-fbb531ad65f3
(Copied from reviewboard)
Tests the following:
1. Basic allocation and setting of string fields.
2. Shrinking a string field and re-expanding it.
3. Growing the last allocation in a string field pool.
4. Setting a string to a large value such that a new string field pool must be
allocated.
In each part, we make sure that the string field is accurate (has the correct
value in it), make sure that the 2 bytes before the string field has the correct
capacity for the field, and for tests 2-4, we make sure that the string field is
where we expect it to be in memory.
Also tested:
5. Shrinking a string field and partially re-expanding it.
6. Setting strings in such a way as to create three separate string field pools
and then removing the middle pool.
There is a bug fix in the init function, which ensures the embedded_pool is set
to NULL which is important for stack allocated structures.
Review: https://reviewboard.asterisk.org/r/185/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@251736 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Current support for regex matching was previously only available on the group.
Also, error reporting for regex failures has been added. In addition to this
feature enhancement a unit test has been written to check the regular expression
logic to ensure the count operation is working as expected.
(closes issue #16642)
Reported by: kobaz
Patches:
groupmatch2.patch uploaded by kobaz (license 834)
Review: https://reviewboard.asterisk.org/r/503/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@247295 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This test works by reading input from arrays to build a sample
dialplan. From there, patterns are attempted to be matched against
said dialplan, with the expected match given. We then search in our
example dialplan to see if we find a match and if what we find matches
what we expected it to match.
(closes issue #16809)
Reported by: lmadsen
Tested by: mmichelson
Review: https://reviewboard.asterisk.org/r/504/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@246942 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This module includes a single test so far that creates events using two
different methods and does some verification on the result to make sure
the correct data can be retrieved from the event that was created.
One bug was found in the event API while developing this test, which makes
me happy. :-)
Review: https://reviewboard.asterisk.org/r/495/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@246260 65c4cc65-6c06-0410-ace0-fbb531ad65f3
1) It occurred to me that the difference in usage between the error ast_str and
the ast_test_update_status() usage has turned out to be a bit ambiguous in
practice. In a lot of cases, the same message was being sent to both.
In other cases, it was only sent to one or the other. My opinion now is that
in every case, I think it makes sense to do both; we should output it to the
CLI as well as save it off for logging purposes.
This change results in most of the changes in this diff, since it required
changes to all existing unit tests. It also allowed for some simplifications
of unit test API implementation code.
2) Update ast_test_status_update() to include the file, function, and line
number for the code providing the update.
3) There are some formatting tweaks here and there. Hopefully they aren't too
distracting for code review purposes. Reviewboard's diff viewer seems to do a
pretty good job of pointing out when something is a whitespace change.
4) I moved the md5_test and sha1_test into the test_utils module. It seemed
like a better approach since these tests are so tiny.
5) I changed the number of nodes used in heap_test_2 from 1 million to
100 thousand. The only reason for this was to reduce the time it took
for this test to run.
6) Remove an unused function prototype that was at the bottom of utils.h.
7) Simplify test_insert() using the LIST_INSERT_SORTALPHA() macro. The one
minor difference in behavior is that it no longer checks for a test registered
with the same name.
8) Expand the code in test_alloc() to provide specific error messages for each
failure case, to clearly inform developers if they forget to set the name,
summary, description, etc.
9) Tweak the output of the "test show registered" CLI command. I swapped the
name and category to have the category first. It seemed more natural since
that is the sort key.
10) Don't output the status ast_str in the "test show results" CLI command.
This is going to tend to be pretty verbose, so just leave that for the
detailed test logs (test generate results).
Review: https://reviewboard.asterisk.org/r/493/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@245864 65c4cc65-6c06-0410-ace0-fbb531ad65f3
1. URI Encoding
This patch changes ast_uri_encode()'s behavior when doreserved is enabled.
Previously when doreserved was enabled only a small set of reserved
characters were encoded. This set was comprised primarily of the reserved
characters defined in RFC3261 section 25.1, but contained other characters as
well. Rather than only escaping the reserved set, doreserved now escapes
all characters not within the unreserved set as defined by RFC 3261 and
RFC 2396. Also, the 'doreserved' variable has been renamed to 'do_special_char'
in attempts to avoid confusion.
When doreserve is not enabled, the previous logic of only encoding the
characters <= 0X1F and > 0X7f remains, except for the '%' character, which
must always be encoded as it signifies a HEX escaped character during the decode
process.
2. URI Decoding: Break up URI before decode.
In chan_sip.c ast_uri_decode is called on the entire URI instead of it's
individual parts after it is parsed. This is not good as ast_uri_decode
can introduce special characters back into the URI which can mess up parsing.
This patch resolves this by not decoding a URI until parsing is completely
done. There are many instances where we check to see if pedantic checking
is enabled before we decode a URI. In these cases a new macro,
SIP_PEDANTIC_DECODE, is used on the individual parsed segments of the URI
rather than constantly putting if (pedantic) { decode() } checks everywhere
in the code. In the areas where ast_uri_decode is not dependent upon
pedantic checking this macro is not used, but decoding is still moved to
each individual part of the URI. The only behavior that should change from
this patch is the time at which decoding occurs.
Since I had to look over every place URI parsing occurs to create this
patch, I found several places where we use duplicate code for parsing.
To consolidate the code, those areas have updated to use the parse_uri()
function where possible.
3. SIP display-name decoding according to RFC3261 section 25.
To properly decode the display-name portion of a FROM header, chan_sip's
get_calleridname() function required a complete re-write. More information
about this change can be found in the comments at the beginning of this function.
4. Unit Tests.
Unit tests for ast_uri_encode, ast_uri_decode, and get_calleridname() have been
written. This involved the addition of the test_utils.c file for testing the
utils api.
(closes issue #16299)
Reported by: wdoekes
Patches:
astsvn-16299-get_calleridname.diff uploaded by wdoekes (license 717)
get_calleridname_rewrite.diff uploaded by dvossel (license 671)
Tested by: wdoekes, dvossel, Nick_Lewis
Review: https://reviewboard.asterisk.org/r/469/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@243200 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The Unit Test Framework is a new API that manages registration and
execution of unit tests in Asterisk with the purpose of verifying the
operation of C functions. The Framework consists of a single test
manager accompanied by a list of registered test functions defined
within the code. A test is defined, registered, and unregistered
from the framework using a set of macros which allow the test code
to only be compiled within asterisk when the TEST_FRAMEWORK flag is
enabled in menuselect. This allows the test code to exist in the
same file as the C functions it intends to verify. Registered tests
may be viewed and executed via a set of new CLI commands. CLI commands
are also present for generating and exporting test results into xml
and txt formats.
For more information and use cases please refer to the documentation
provided at the beginning of the test.h file.
Review: https://reviewboard.asterisk.org/r/447/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@236027 65c4cc65-6c06-0410-ace0-fbb531ad65f3
ami_testhooks.c was registering for AMI events upon module load. Moved the registration
to its own CLI command. Added CLI command for unregistering the hook. Changed some of
the wording, removed unnecessary arguments/parameters.
Reported by: rmudgett
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@228661 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch, originally submitted by jozza, enables custom modules to send actions to AMI
and receive messages from AMI via a hook interface. Included is a simple test module to
illustrate the interface.
(closes issue #14635)
Reported by: jozza
Review: https://reviewboard.asterisk.org/r/412/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@227448 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This commit introduces the security events API. This API is to be used by
Asterisk components to report events that have security implications.
A simple example is when a connection is made but fails authentication. These
events can be used by external tools manipulate firewall rules or something
similar after detecting unusual activity based on security events.
Inside of Asterisk, the events go through the ast_event API. This means that
they have a binary encoding, and it is easy to write code to subscribe to these
events and do something with them.
One module is provided that is a subscriber to these events - res_security_log.
This module turns security events into a parseable text format and sends them
to the "security" logger level. Using logger.conf, these log entries may be
sent to a file, or to syslog.
One service, AMI, has been fully updated for reporting security events.
AMI was chosen as it was a fairly straight forward service to convert.
The next target will be chan_sip. That will be more complicated and will
be done as its own project as the next phase of security events work.
For more information on the security events framework, see the documentation
generated from doc/tex/. "make asterisk.pdf"
Review: https://reviewboard.asterisk.org/r/273/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@206021 65c4cc65-6c06-0410-ace0-fbb531ad65f3
CEL is the new system for logging channel events. This was inspired after
facing many problems trying to represent what is possible to happen to a call
in Asterisk using CDR records. For more information on CEL, see the built in
HTML or PDF documentation generated from the files in doc/tex/.
Many thanks to Steve Murphy (murf) and Brian Degenhardt (bmd) for their hard
work developing this code. Also, thanks to Matt Nicholson (mnicholson) and
Sean Bright (seanbright) for their assistance in the final push to get this
code ready for Asterisk trunk.
Review: https://reviewboard.asterisk.org/r/239/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@203638 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch adds the ability for modules to dynamically create logger levels for their own use; these are named levels just like the built-in levels, and can be directed to any destination that the logger can send any level to, by including their names in logger.conf.
Review: https://reviewboard.asterisk.org/r/244/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@194610 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Correct command description in test_sched.c and include asterisk/cli.h in test_skel.c, since it's highly unlikely that a test module will *not* want to provide CLI commands to execute the tests
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@191997 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This branch adds additional methods to dialplan functions, whereby the result
buffers are now dynamic buffers, which can be expanded to the size of any
result. No longer are variable substitutions limited to 4095 bytes of data.
In addition, the common case of needing buffers much smaller than that will
enable substitution to only take up the amount of memory actually needed.
The existing variable substitution routines are still available, but users
of those API calls should transition to using the dynamic-buffer APIs.
Reviewboard: http://reviewboard.digium.com/r/174/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@191140 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch changes the scheduler to use a max-heap to store pending scheduler
entries instead of a fully sorted doubly linked list. When the number of
entries in the scheduler gets large, this will perform much better. For much
more detailed information on this change, see the review request.
Review: http://reviewboard.digium.com/r/160/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@176639 65c4cc65-6c06-0410-ace0-fbb531ad65f3