The AST_CONFIG dialplan function defined in func_config.c allocates its
config file list entries using ast_malloc. List entry allocations
destined for use with Asterisk's linked list API must be ast_calloc()d
or otherwise initialized so that list pointers are set to NULL. These
uses of ast_malloc have been replaced by ast_calloc to prevent
dereferencing of uninitialized pointer values when traversing the list.
(closes issue ASTERISK-22483)
Reported by: Brian Scott
........
Merged revisions 400694 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 400697 from http://svn.asterisk.org/svn/asterisk/branches/11
........
Merged revisions 400701 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@400704 65c4cc65-6c06-0410-ace0-fbb531ad65f3
I can only blame this on a bad merge, because this in no way worked properly
the way it was written. Mea culpa. The function should now parse its arguments
correctly and function properly. (Note that the API used by the CDR_PROP
function has working unit tests... this was merely bad coding of the actual
registered function)
(closes issue ASTERISK-22613)
Reported by: Private Name
........
Merged revisions 400196 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@400197 65c4cc65-6c06-0410-ace0-fbb531ad65f3
........
r399887 | dlee | 2013-09-26 10:41:47 -0500 (Thu, 26 Sep 2013) | 1 line
Minor performance bump by not allocate manager variable struct if we don't need it
........
r400138 | dlee | 2013-09-30 10:24:00 -0500 (Mon, 30 Sep 2013) | 23 lines
Stasis performance improvements
This patch addresses several performance problems that were found in
the initial performance testing of Asterisk 12.
The Stasis dispatch object was allocated as an AO2 object, even though
it has a very confined lifecycle. This was replaced with a straight
ast_malloc().
The Stasis message router was spending an inordinate amount of time
searching hash tables. In this case, most of our routers had 6 or
fewer routes in them to begin with. This was replaced with an array
that's searched linearly for the route.
We more heavily rely on AO2 objects in Asterisk 12, and the memset()
in ao2_ref() actually became noticeable on the profile. This was
#ifdef'ed to only run when AO2_DEBUG was enabled.
After being misled by an erroneous comment in taskprocessor.c during
profiling, the wrong comment was removed.
Review: https://reviewboard.asterisk.org/r/2873/
........
r400178 | dlee | 2013-09-30 13:26:27 -0500 (Mon, 30 Sep 2013) | 24 lines
Taskprocessor optimization; switch Stasis to use taskprocessors
This patch optimizes taskprocessor to use a semaphore for signaling,
which the OS can do a better job at managing contention and waiting
that we can with a mutex and condition.
The taskprocessor execution was also slightly optimized to reduce the
number of locks taken.
The only observable difference in the taskprocessor implementation is
that when the final reference to the taskprocessor goes away, it will
execute all tasks to completion instead of discarding the unexecuted
tasks.
For systems where unnamed semaphores are not supported, a really
simple semaphore implementation is provided. (Which gives identical
performance as the original taskprocessor implementation).
The way we ended up implementing Stasis caused the threadpool to be a
burden instead of a boost to performance. This was switched to just
use taskprocessors directly for subscriptions.
Review: https://reviewboard.asterisk.org/r/2881/
........
r400180 | dlee | 2013-09-30 13:39:34 -0500 (Mon, 30 Sep 2013) | 28 lines
Optimize how Stasis forwards are dispatched
This patch optimizes how forwards are dispatched in Stasis.
Originally, forwards were dispatched as subscriptions that are invoked
on the publishing thread. This did not account for the vast number of
forwards we would end up having in the system, and the amount of work it
would take to walk though the forward subscriptions.
This patch modifies Stasis so that rather than walking the tree of
forwards on every dispatch, when forwards and subscriptions are changed,
the subscriber list for every topic in the tree is changed.
This has a couple of benefits. First, this reduces the workload of
dispatching messages. It also reduces contention when dispatching to
different topics that happen to forward to the same aggregation topic
(as happens with all of the channel, bridge and endpoint topics).
Since forwards are no longer subscriptions, the bulk of this patch is
simply changing stasis_subscription objects to stasis_forward objects
(which, admittedly, I should have done in the first place.)
Since this required me to yet again put in a growing array, I finally
abstracted that out into a set of ast_vector macros in
asterisk/vector.h.
Review: https://reviewboard.asterisk.org/r/2883/
........
r400181 | dlee | 2013-09-30 13:48:57 -0500 (Mon, 30 Sep 2013) | 28 lines
Remove dispatch object allocation from Stasis publishing
While looking for areas for performance improvement, I realized that an
unused feature in Stasis was negatively impacting performance.
When a message is sent to a subscriber, a dispatch object is allocated
for the dispatch, containing the topic the message was published to, the
subscriber the message is being sent to, and the message itself.
The topic is actually unused by any subscriber in Asterisk today. And
the subscriber is associated with the taskprocessor the message is being
dispatched to.
First, this patch removes the unused topic parameter from Stasis
subscription callbacks.
Second, this patch introduces the concept of taskprocessor local data,
data that may be set on a taskprocessor and provided along with the data
pointer when a task is pushed using the ast_taskprocessor_push_local()
call. This allows the task to have both data specific to that
taskprocessor, in addition to data specific to that invocation.
With those two changes, the dispatch object can be removed completely,
and the message is simply refcounted and sent directly to the
taskprocessor.
Review: https://reviewboard.asterisk.org/r/2884/
........
Merged revisions 399887,400138,400178,400180-400181 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@400186 65c4cc65-6c06-0410-ace0-fbb531ad65f3
* Made ast_strftime_locale() ensure that the output buffer is initialized.
The std library strftime() returns 0 and does not touch the buffer if it
has an error. However, the function can also return 0 without an error.
(closes issue ASTERISK-22412)
Reported by: rmudgett
........
Merged revisions 397902 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@397903 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This removes unused code, event types, IE pltypes, and event IE types
where possible and makes several functions private that were once
public. This includes a renumbering of the remaining event and IE types
which breaks binary compatibility with previous versions. The last
remaining consumers of the old event system (or parts thereof) are
main/security_events.c, res/res_security_log.c, tests/test_cel.c,
tests/test_event.c, main/cel.c, and the CEL backends.
Review: https://reviewboard.asterisk.org/r/2703/
(closes issue ASTERISK-22139)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@396887 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch implements the controls from ARI recordings. The controls
are:
* DELETE /recordings/live/{recordingName} - stop recording and
discard it
* POST /recordings/live/{recordingName}/stop - stop recording
* POST /recordings/live/{recordingName}/pause - pause recording
* POST /recordings/live/{recordingName}/unpause - resume recording
* POST /recordings/live/{recordingName}/mute - mute recording (record
silence to the file)
* POST /recordings/live/{recordingName}/unmute - unmute recording.
Since this underlying functionality did not already exist, is was
added to app.c by a set of control frames, similar to how playback
control works. The pause/mute control frames are toggles, even though
the ARI controls are idempotent, to be consistent with the playback
control frames.
(closes issue ASTERISK-22181)
Review: https://reviewboard.asterisk.org/r/2697/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@396331 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This commit is smaller than the initial review placed on review board. This is because
a change to allow for channel drivers to access parking functionality externally was
committed and invalidated quite a few of the changes initially made.
(closes issue ASTERISK-22039)
reported by Matt Jordan
Review: https://reviewboard.asterisk.org/r/2717
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@396103 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This prevents XML documentation duplication by expanding channel and
bridge snapshot tags into channel and bridge snapshot parameter sets
with a given prefix or defaulting to no prefix. This also prevents
documentation from becoming fractured and out of date by keeping all
variations of the documentation in template form such that it only
needs to be updated once and keeps maintenance to a minimum.
Review: https://reviewboard.asterisk.org/r/2708/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@395985 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch renames the bridging* files to bridge*. This may seem pedantic
and silly, but it fits better in line with current Asterisk naming conventions:
* channel is not "channeling"
* monitor is not "monitoring"
etc.
A bridge is an object. It is a first class citizen in Asterisk. "Bridging" is
the act of using a bridge on a set of channels - and the API that fulfills that
role is more than just the action.
(closes issue ASTERISK-22130)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@395378 65c4cc65-6c06-0410-ace0-fbb531ad65f3
It is not apparent to the average user that the PASSTHRU function should not
be passed as ${PASSTHRU(string)} but just as PASSTHRU(string) to functions
which take a variable name and not its contents.
This patch clarifies the behavior in the documentation and provides an example.
(closes issue ASTERISK-21717)
Reported by: Richard Miller
patches:
func_strings.diff uploaded by Richard Miller (license 5685)
........
Merged revisions 394302 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 394303 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@394304 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When func_cdr is used for variable substitution, there is no channel name
and hence no run-time information available for CDR variable substitution.
In that case, the correct thing to do is to use the CDR object on the channel
passed to the function. This patch checks to see if the channel passed in
has a name - if not, it uses ast_cdr_format_var instead of ast_cdr_get_var.
This allows CDR backends to continue to use variable substitution in order to
resolve ast_cdr object properties.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@392214 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The type of tv_usec is suseconds_t. On Linux, this is usually a long int, but
the specification is actually pretty lax on what it might actually be. And,
sadly, there's no printf/scanf width specifier for suseconds_t. So it could
bit an int or a long, but there's not a great way to tell which it is.
This patch fixes scanf by reading into a long temporary variable that's then
stored into the tv_usec. It fixes printf by casting the tv_usec to a long
first.
This patch also adds some missing width specifiers for some debug statements,
which would cause ".000001" to be displayed at ".1".
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@392076 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch is the initial push to update Asterisk's CDR engine for the new
bridging framework. This patch guts the existing CDR engine and builds the new
on top of messages coming across Stasis. As changes in channel state and bridge
state are detected, CDRs are built and dispatched accordingly. This
fundamentally changes CDRs in a few ways.
(1) CDRs are now *very* reflective of the actual state of channels and bridges.
This means CDRs track well with what an actual channel is doing - which
is useful in transfer scenarios (which were previously difficult to pin
down). It does, however, mean that CDRs cannot be 'fooled'. Previous
behavior in Asterisk allowed for CDR applications, channels, and other
properties to be spoofed in parts of the code - this no longer works.
(2) CDRs have defined behavior in multi-party scenarios. This behavior will not
be what everyone wants, but it is a defined behavior and as such, it is
predictable.
(3) The CDR manipulation functions and applications have been overhauled. Major
changes have been made to ResetCDR and ForkCDR in particular. Many of the
options for these two applications no longer made any sense with the new
framework and the (slightly) more immutable nature of CDRs.
There are a plethora of other changes. For a full description of CDR behavior,
see the CDR specification on the Asterisk wiki.
(closes issue ASTERISK-21196)
Review: https://reviewboard.asterisk.org/r/2486/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@391947 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Breaks many things until they can be reworked. A partial list:
chan_agent
chan_dahdi, chan_misdn, chan_iax2 native bridging
app_queue
COLP updates
DTMF attended transfers
Protocol attended transfers
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@389378 65c4cc65-6c06-0410-ace0-fbb531ad65f3
In r388005, macros were introduced to consistently define message
types. This added an assert if a message type was used either before
it was initialized or after it had been cleaned up. It turns out that
this assertion fires during shutdown.
This actually exposed a hidden shutdown ordering problem. Since
unsubscribing is asynchronous, it's possible that the message types
used by the subscription could be freed before the final message of
the subscription was processed.
This patch adds stasis_subscription_join(), which blocks until the
last message has been processed by the subscription. Since joining was
most commonly done right after an unsubscribe, a
stasis_unsubscribe_and_join() convenience function was also added.
Similar functions were also added to the stasis_caching_topic and
stasis_message_router, since they wrap subscriptions and have similar
problems.
Other code in trunk was refactored to join() where appropriate, or at
least verify that the subscription was complete before being
destroyed.
Review: https://reviewboard.asterisk.org/r/2540
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@389011 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch removes the direct call to AMI from the SHARED function
and instead call Stasis-Core. Stasis-Core delivers the notification
that a shared variable has changed on a channel to all interested
consumers.
(issue ASTERISK-21462)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@387630 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch fixes a crash in Asterisk that could be caused by using the
PresenceState AMI action while providing an invalid provider. This patch
also adds some additional warnings when a user attempts to provide the
PresenceState action with invalid data, and removes some NOTICE statements
that were still lurking in the code from testing.
(closes issue AST-1084)
Reported by: John Bigelow
Tested by: John Bigelow
........
Merged revisions 381594 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@381595 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch adds the capability for asynchronous manipulation of audio being
played back to a channel though a new AMI action "ControlPlayback". The
ControlPlayback action supports a number of operations, the availability of
which depend on the application being used to send audio to the channel.
When the audio playback was initiated using the ControlPlayback application
or CONTROL STREAM FILE AGI command, the audio can be paused, stopped,
restarted, reversed, or skipped forward. When initiated by other mechanisms
(such as the Playback application), the audio can be stopped, reversed, or
skipped forward.
Review: https://reviewboard.asterisk.org/r/2265/
(closes issue ASTERISK-20882)
Reported by: mjordan
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@379830 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When reading configuration data from an Asterisk .conf file or when pulling
data from an Asterisk RealTime backend, Asterisk was copying the data on the
stack for manipulation. Unfortunately, it is possible to read configuration
data or realtime data from some data source that provides a large blob of
characters. This could potentially cause a crash via a stack overflow.
This patch prevents large sets of data from being read from an ARA backend or
from an Asterisk conf file.
(issue ASTERISK-20658)
Reported by: wdoekes
Tested by: wdoekes, mmichelson
patches:
* issueA20658_dont_process_overlong_config_lines.patch uploaded by wdoekes (license 5674)
* issueA20658_func_realtime_limit.patch uploaded by wdoekes (license 5674)
........
Merged revisions 378375 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 378376 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@378377 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Asterisk maintains an internal cache for devices in the event subsystem. The
device state cache holds the state of each device known to Asterisk, such that
consumers of device state information can query for the last known state for
a particular device, even if it is not part of an active call. The concept of
a device in Asterisk can include entities that do not have a physical
representation. One way that this occurred was when anonymous calls are allowed
in Asterisk. A device was automatically created and stored in the cache for
each anonymous call that occurred; this was possible in the SIP and IAX2
channel drivers and through channel drivers that utilized the
res_jabber/res_xmpp resource modules (Gtalk, Jingle, and Motif). These devices
are never removed from the system, allowing anonymous calls to potentially
exhaust a system's resources.
This patch changes the event cache subsystem and device state management to
no longer cache devices that are not associated with a physical entity.
(issue ASTERISK-20175)
Reported by: Russell Bryant, Leif Madsen, Joshua Colp
Tested by: kmoore
patches:
event-cachability-3.diff uploaded by jcolp (license 5000)
........
Merged revisions 378303 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 378320 from http://svn.asterisk.org/svn/asterisk/branches/10
........
Merged revisions 378321 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@378322 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Currently, if an acknowledgement of a timer fails Asterisk will not realize
that a serious error occurred and will continue attempting to use the timer's
file descriptor. This can lead to situations where errors stream to the
CLI/log file. This consumes significant resources, masks the actual problem
that occurred (whatever caused the timer to fail in the first place), and
can leave channels in odd states.
This patch propagates the errors in the timing resource modules up through
the timer core, and makes users of these timers handle acknowledgement
failures. It also adds some defensive coding around the use of timers
to prevent using bad file descriptors in off nominal code paths.
Note that the patch created by the issue reporter was modified slightly for
this commit and backported to 1.8, as it was originally written for
Asterisk 10.
Review: https://reviewboard.asterisk.org/r/2178/
(issue ASTERISK-20032)
Reported by: Jeremiah Gowdy
patches:
jgowdy-timerfd-6-22-2012.diff uploaded by Jeremiah Gowdy (license 6358)
........
Merged revisions 375893 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 375894 from http://svn.asterisk.org/svn/asterisk/branches/10
........
Merged revisions 375895 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@375896 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Update title that was left behind many years ago. Used revision 6596 as my guide for what it should be.
(issue ASTERISK-20259)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@375007 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This allows for the REDIRECTING dialplan function to be
used to set the reason to any string.
The SIP channel driver has been modified to set the redirecting
reason string to the value received in a Diversion header. In
addition, SIP 480 response reason text will set the redirecting
reason as well.
(closes issue AST-942)
reported by Malcolm Davenport
(closes issue AST-943)
reported by Malcolm Davenport
Review: https://reviewboard.asterisk.org/r/2101
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@373701 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Doxygen updates including mistakes, misspellings, missing parameters, updates for Doxygen style. Some missing txt file links are removed but their content or essense will be included in some later updates. A majority of the txt files were removed in the 1.6 era but never noted. The HR and EXTREF are simple changes that make the documentation more compatable with more versions of Doxygen.
Further updates coming.
(issue ASTERISK-20259)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@373330 65c4cc65-6c06-0410-ace0-fbb531ad65f3
* ASTERISK-20383
Missing named call pickup group features:
CHANNEL(callgroup) - Need CHANNEL(namedcallgroup)
CHANNEL(pickupgroup) - Need CHANNEL(namedpickupgroup)
Pickup() - Needs to also select from named pickup groups.
* ASTERISK-20384
Using the pickupexten, the pickup channel selection could fail even though
there was a call it could have picked up. In a call pickup race when
there are multiple calls to pickup and two extensions try to pickup a
call, it is conceivable that the loser will not pick up any call even
though it could have picked up the next oldest matching call.
Regression because of the named call pickup group feature.
* See ASTERISK-20386 for the implementation improvements. These are the
changes in channel.c and channel.h.
* Fixed some locking issues in CHANNEL().
(closes issue ASTERISK-20383)
Reported by: rmudgett
(closes issue ASTERISK-20384)
Reported by: rmudgett
(closes issue ASTERISK-20386)
Reported by: rmudgett
Tested by: rmudgett
Review: https://reviewboard.asterisk.org/r/2112/
........
Merged revisions 373220 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@373221 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The name of the "HangupCauseClear" application is "HangupCauseClear",
not "HangupcauseClear". The incorrect case of 'cause' caused the
XML documentation to not register properly.
As an aside, this commit message felt very awkward, but I'm not sure
how else to note that "X", which has to be "X", was referred to as "x".
(closes issue ASTERISK-20253)
Reported by: Andrew Latham
Patches:
hangupcause.diff uploaded by Andrew Latham (license #5985)
........
Merged revisions 371516 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@371517 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch adds the feature "Private representation of caller, connected
and redirecting party ids", as previously discussed with us (DATUS) and
Digium.
1. Feature motivation
Until now it is quite difficult to modify a party number or name which can
only be seen by exactly one particular instantiated technology channel
subscriber. One example where a modified party number or name on one
channel is spread over several channels are supplementary services like
call transfer or pickup. To implement these features Asterisk internally
copies caller and connected ids from one channel to another. Another
example are extension subscriptions. The monitoring entities (watchers)
are notified of state changes and - if desired - of party numbers or names
which represent the involving call parties. One major feature where a
private representation of party names is essentially needed, i.e. where a
party name shall be exclusively signaled to only one particular user, is a
private user-specific name resolution for party numbers. A lookup in a
private destination-dependent telephone book shall provide party names
which cannot be seen by any other user at any time.
2. Feature Description
This feature comes along with the implementation of additional private
party id elements for caller id, connected id and redirecting ids inside
Asterisk channels.
The private party id elements can be read or set by the user using
Asterisk dialplan functions.
When a technology channel is initiating a call, receives an internal
connected-line update event, or receives an internal redirecting update
event, it merges the corresponding public id with the private id to create
an effective party id. The effective party id is then used for protocol
signaling.
The channel technologies which initially support the private id
representation with this patch are SIP (chan_sip), mISDN (chan_misdn) and
PRI (chan_dahdi).
Once a private name or number on a channel is set and (implicitly) made
valid, it is generally used for any further protocol signaling until it is
rewritten or invalidated.
To simplify the invalidation of private ids all internally generated
connected/redirecting update events and also all connected/redirecting
update events which are generated by technology channels -- receiving
regarding protocol information - automatically trigger the invalidation of
private ids.
If not using the private party id representation feature at all, i.e. if
using only the 'regular' caller-id, connected and redirecting related
functions, the current characteristic of Asterisk is not affected by the
new extended functionality.
3. User interface Description
To grant access to the private name and number representation from the
Asterisk dialplan, the CALLERID, CONNECTEDLINE and REDIRECTING dialplan
functions are extended by the following data types. The formats of these
data types are equal to the corresponding regular 'non-private' already
existing data types:
CALLERID:
priv-all
priv-name priv-name-valid priv-name-charset priv-name-pres
priv-num priv-num-valid priv-num-plan priv-num-pres
priv-subaddr priv-subaddr-valid priv-subaddr-type priv-subaddr-odd
priv-tag
CONNECTEDLINE:
priv-name priv-name-valid priv-name-pres priv-name-charset
priv-num priv-num-valid priv-num-pres priv-num-plan
priv-subaddr priv-subaddr-valid priv-subaddr-type priv-subaddr-odd
priv-tag
REDIRECTING:
priv-orig-name priv-orig-name-valid priv-orig-name-pres priv-orig-name-charset
priv-orig-num priv-orig-num-valid priv-orig-num-pres priv-orig-num-plan
priv-orig-subaddr priv-orig-subaddr-valid priv-orig-subaddr-type priv-orig-subaddr-odd
priv-orig-tag
priv-from-name priv-from-name-valid priv-from-name-pres priv-from-name-charset
priv-from-num priv-from-num-valid priv-from-num-pres priv-from-num-plan
priv-from-subaddr priv-from-subaddr-valid priv-from-subaddr-type priv-from-subaddr-odd
priv-from-tag
priv-to-name priv-to-name-valid priv-to-name-pres priv-to-name-charset
priv-to-num priv-to-num-valid priv-to-num-pres priv-to-num-plan
priv-to-subaddr priv-to-subaddr-valid priv-to-subaddr-type priv-to-subaddr-odd
priv-to-tag
Reported by: Thomas Arimont
Review: https://reviewboard.asterisk.org/r/2030/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@371120 65c4cc65-6c06-0410-ace0-fbb531ad65f3