Set a variable on the channel that indicates which attempt number we
are currently performing to allow for attempt-specific behavior.
ASTERISK-26568 #close
Reported by: Roman Shubovich
Change-Id: Iacd7e8d43b0ed5b6cb021c62f41f1a1f5733dd89
Per the linked issue, we aren't checking the buffer filled by fgets()
to determine if it contains a newline, so we will fail to correctly
parse the trailing portion of a long line.
This patch increases the buffer size from 256 to 1024, and skips any
line that exceeds that length, logging a warning in the process.
ASTERISK-17067 #close
Reported by: Dave Olszewski
Change-Id: I51bcf270c1b4347ba05b43f18dc2094c76f5d7b0
In Asterisk 11, if the 'Originate' AMI command failed to connect the provided
Channel while in extension mode, a 'failed' extension would be looked up and
run. This was, I believe, unintentionally removed in 51b6c49. This patch
restores that behavior.
This also adds an enum for the various 'synchronous' modes in an attempt to
make them meaningful.
ASTERISK-26115 #close
Reported by: Nasir Iqbal
Change-Id: I8afbd06725e99610e02adb529137d4800c05345d
ASTERISK_REGISTER_FILE no longer has any purpose so this commit removes
all traces of it.
Previously exported symbols removed:
* __ast_register_file
* __ast_unregister_file
* ast_complete_source_filename
This also removes the mtx_prof static variable that was declared when
MTX_PROFILE was enabled. This variable was only used in lock.c so it
is now initialized in that file only.
ASTERISK-26480 #close
Change-Id: I1074af07d71f9e159c48ef36631aa432c86f9966
pbx_spool used to delete/move the call file upon successful outgoing
call completion, but did not delete it from in-memory list of files
(dirlist, used only when compiled with inotify/kqueue support).
That resulted in an extra attempt to process that filename after
retrytime seconds.
Then, if a new file with the same name appears that is scheduled
in future further than the completed one plus its retrytime,
then it gets executed earlier than expected.
This patch fixes remove_from_queue function to also remove the entry
from the dirlist.
ASTERISK-17069 #close
Reported by: Jeremy Kister
ASTERISK-24442 #close
Reported by: tootai
Change-Id: If9ec9b88073661ce485d6b008fd0b2612e49a28b
Git does not support the ability to replace a token with a version
string during check-in. While it does have support for replacing a
token on clone, this is somewhat sub-optimal: the token is replaced
with the object hash, which is not particularly easy for human
consumption. What's more, in practice, the source file version was often
not terribly useful. Generally, when triaging bugs, the overall version
of Asterisk is far more useful than an individual SVN version of a file. As a
result, this patch removes Asterisk's support for showing source file
versions.
Specifically, it does the following:
* Rename ASTERISK_FILE_VERSION macro to ASTERISK_REGISTER_FILE, and
remove passing the version in with the macro. Other facilities
than 'core show file version' make use of the file names, such as
setting a debug level only on a specific file. As such, the act of
registering source files with the Asterisk core still has use. The
macro rename now reflects the new macro purpose.
* main/asterisk:
- Refactor the file_version structure to reflect that it no longer
tracks a version field.
- Remove the "core show file version" CLI command. Without the file
version, it is no longer useful.
- Remove the ast_file_version_find function. The file version is no
longer tracked.
- Rename ast_register_file_version/ast_unregister_file_version to
ast_register_file/ast_unregister_file, respectively.
* main/manager: Remove value from the Version key of the ModuleCheck
Action. The actual key itself has not been removed, as doing so would
absolutely constitute a backwards incompatible change. However, since
the file version is no longer tracked, there is no need to attempt to
include it in the Version key.
* UPGRADE: Add notes for:
- Modification to the ModuleCheck AMI Action
- Removal of the "core show file version" CLI command
Change-Id: I6cf0ff280e1668bf4957dc21f32a5ff43444a40e
Much needed was a way to assign id to objects on creation, and
much change was necessary to accomplish it. Channel uniqueids
and linkedids are split into separate string and creation time
components without breaking linkedid propgation. This allowed
the uniqueid to be specified by the user interface - and those
values are now carried through to channel creation, adding the
assignedids value to every function in the chain including the
channel drivers. For local channels, the second channel can be
specified or left to default to a ;2 suffix of first. In ARI,
bridge, playback, and snoop objects can also be created with a
specified uniqueid.
Along the way, the args order to allocating channels was fixed
in chan_mgcp and chan_gtalk, and linkedid is no longer lost as
masquerade occurs.
(closes issue ASTERISK-23120)
Review: https://reviewboard.asterisk.org/r/3191/
........
Merged revisions 410157 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@410158 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Channel snapshots have string representations of the channel's native formats.
Prior to this change, the format strings were re-created on ever channel snapshot
creation. Since channel native formats rarely change, this was very wasteful.
Now, string representations of formats may optionally be stored on the ast_format_cap
for cases where string representations may be requested frequently. When formats
are altered, the string cache is marked as invalid. When strings are requested, the
cache validity is checked. If the cache is valid, then the cached strings are copied.
If the cache is invalid, then the string cache is rebuilt and copied, and the cache
is marked as being valid again.
Review: https://reviewboard.asterisk.org/r/2879
........
Merged revisions 400356 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@400363 65c4cc65-6c06-0410-ace0-fbb531ad65f3
In certain situations, call files are not processed when using KQueue with
pbx_spool. Asterisk was sending an invalid timeout value when the spool
directory is empty, causing the call to kevent to error immediately. This
can create a tight loop, increasing the CPU load on the system.
(closes issue ASTERISK-21176)
Reported by: Carlton O'Riley
patches:
kqueue_osx.patch uploaded by coriley (License 6473)
........
Merged revisions 383120 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 383121 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@383122 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Future dated call files are ignored when astspooldir is relative to the
current directory. The queue_file() assumed that the qdir needed to be
prepended if the given filename did not start with a '/'. If astspooldir
is relative it is not going to start from the root directory obviously so
it will not start with a '/'. The filename used in queue_file()
ultimately results in qdir prepended multiple times.
* Made queue_file() not prepend qdir if the filename contains a '/'.
(closes issue ASTERISK-20593)
Reported by: James Le Cuirot
Patches:
0004-Fix-future-call-files-from-relative-directories.patch (license #6439) patch uploaded by James Le Cuirot
........
Merged revisions 376232 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 376233 from http://svn.asterisk.org/svn/asterisk/branches/10
........
Merged revisions 376234 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@376235 65c4cc65-6c06-0410-ace0-fbb531ad65f3
If scan_service() cannot open the spool file, it logs a message saying
that it will delete the file and calls remove_from_queue() to do it.
However, remove_from_queue() fails to delete the spool file because struct
outgoing has not yet been fully initialized.
* Merged allocating a new struct outgoing and init_outgoing() into
new_outgoing(). Allocation is initialization.
* Made apply_outgoing() not initialize the spool filename in struct
outgoing.
* Made apply_outgoing() call ast_trim_blanks() and ast_skip_blanks()
rather than manually inlining them.
* Reduced indentation levels in apply_outgoing().
* Fixed a garbled comment in remove_from_queue().
* Reworked scan_service() to simplify it.
(closes issue ASTERISK-17231)
Reported by: David Chappell
Patches:
spool_open_failure.diff (license #4997) patch uploaded by David Chappell
Started with this patch.
........
Merged revisions 374686 from http://svn.asterisk.org/svn/asterisk/branches/1.8
* Fixed some memory leaks on off nominal paths in init_outgoing() when
merging into the new_outgoing() function dealing with o->capabilities.
........
Merged revisions 374695 from http://svn.asterisk.org/svn/asterisk/branches/10
........
Merged revisions 374708 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@374717 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This is based on the work done by Olle Johansson on review board.
The idea is that the channel specified in an AMI originate or call
file is typically not connected to the outgoing extension until the
channel has been answered. With this change, an EarlyMedia header can
be specified for AMI originates and an early_media option can
be specified in call files. With this option set, once early media is
received on a channel, it will be connected with the outgoing extension.
(closes issue ASTERISK-18644)
Reported by Olle Johansson
Review: https://reviewboard.asterisk.org/r/1472
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@370951 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/10
................
r342277 | kmoore | 2011-10-25 11:08:04 -0500 (Tue, 25 Oct 2011) | 25 lines
Merged revisions 342276 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r342276 | kmoore | 2011-10-25 11:06:57 -0500 (Tue, 25 Oct 2011) | 18 lines
Fix spool handling to allow call files to be hardlinked into place
This fixes the inotify code to handle call files being hardlinked into the
spool directory.
The smsq utility does this, instead of rename(), to ensure that it cannot
accidentally overwrite an existing spool file. A rename() might do that, but
link() will definitely not.
The inotify code had broken this, because it would wait for an IN_CLOSE_WRITE
event on the file... which was never forthcoming, since it was never opened.
Now we look for IN_OPEN events following the IN_CREATE event, and only wait
for an IN_CLOSE_WRITE if the file was actually opened.
Patch-by: dwmw2
(closes issue ASTERISK-18331)
Review: https://reviewboard.asterisk.org/r/1391/
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@342278 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch is the foundation of an entire new way of looking at media in Asterisk.
The code present in this patch is everything required to complete phase1 of my
Media Architecture proposal. For more information about this project visit the link below.
https://wiki.asterisk.org/wiki/display/AST/Media+Architecture+Proposal
The primary function of this patch is to convert all the usages of format
bitfields in Asterisk to use the new format and format_cap APIs. Functionally
no change in behavior should be present in this patch. Thanks to twilson
and russell for all the time they spent reviewing these changes.
Review: https://reviewboard.asterisk.org/r/1083/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@306010 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This will save a considerable amount of CPU on the BSDs, including Mac OS X,
as it eliminates several places in the code that we previously used a busy
loop. Additionally, this adds a res_timing interface, using kqueue timers.
Review: https://reviewboard.asterisk.org/r/543/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@262852 65c4cc65-6c06-0410-ace0-fbb531ad65f3
In discussions today at the Europe Asterisk Developer Meet-Up, we determined that
the event_log was used in only 9 places in the entire tree, and really was not needed
at all. The users have been converted to use LOG_NOTICE, or the messages have been
removed since other messages were already in place that provided the same information.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@191785 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r160558 | tilghman | 2008-12-03 11:34:34 -0600 (Wed, 03 Dec 2008) | 7 lines
If an entry is added to the directory during a scan when another entry expires,
then that new entry will not be processed promptly, but must wait for either a
future entry to start or a current entry's retry to occur. If no other entries
exist in the directory (other than the new entries) when a bunch expire, then
the new entries must wait until another new entry is added to be processed.
This was a rather weird race condition, really. Fixes AST-147.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@160559 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r160551 | tilghman | 2008-12-03 10:58:34 -0600 (Wed, 03 Dec 2008) | 4 lines
Don't start scanning the directory until all modules are loaded, because some
required modules (channels, apps, functions) may not yet be in memory yet.
Fixes AST-149.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@160552 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r123710 | tilghman | 2008-06-18 15:22:42 -0500 (Wed, 18 Jun 2008) | 7 lines
Set the variables top-down, so that if a script sets a variable more than once,
the last one will take precedence.
(closes issue #12673)
Reported by: phber
Patches:
20080519__bug12673.diff.txt uploaded by Corydon76 (license 14)
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@123715 65c4cc65-6c06-0410-ace0-fbb531ad65f3
build times - tested, there is no measureable difference before and
after this commit.
In this change:
use asterisk/compat.h to include a small set of system headers:
inttypes.h, unistd.h, stddef.h, stddint.h, sys/types.h, stdarg.h,
stdlib.h, alloca.h, stdio.h
Where available, the inclusion is conditional on HAVE_FOO_H as determined
by autoconf.
Normally, source files should not include any of the above system headers,
and instead use either "asterisk.h" or "asterisk/compat.h" which does it
better.
For the time being I have left alone second-level directories
(main/db1-ast, etc.).
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@89333 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Sean Bright
Corey Farrell
Ivan Poddubny
Matt Jordan
Mark Michelson
Scott Griepentrog
Richard Mudgett
Kinsey Moore
Leif Madsen
Paul Belanger
David Vossel
Tilghman Lesher
Jeff Peeler
Russell Bryant
Kevin P. Fleming
Olle Johansson
Jason Parker
Luigi Rizzo
Steve Murphy