git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@3254 65c4cc65-6c06-0410-ace0-fbb531ad65f3
251 lines
10 KiB
Text
Executable file
251 lines
10 KiB
Text
Executable file
;
|
|
; SIP Configuration for Asterisk
|
|
;
|
|
; Syntax for specifying a SIP device in extensions.conf is
|
|
; SIP/devicename where devicename is defined in a section below.
|
|
;
|
|
; You may also use
|
|
; SIP/username@domain to call any SIP user on the Internet
|
|
; (Don't forget to enable DNS SRV records if you want to use this)
|
|
;
|
|
; If you define a SIP proxy as a peer below, you may call
|
|
; SIP/proxyhostname/user or SIP/user@proxyhostname
|
|
; where the proxyhostname is defined in a section below
|
|
;
|
|
; Useful CLI commands to check peers/users:
|
|
; sip show peers Show all SIP peers (including friends)
|
|
; sip show users Show all SIP users (including friends)
|
|
; sip show registry Show status of hosts we register with
|
|
;
|
|
; sip debug Show all SIP messages
|
|
;
|
|
|
|
[general]
|
|
context=default ; Default context for incoming calls
|
|
;realm=mydomain.tld ; Realm for digest authentication
|
|
; defaults to "asterisk"
|
|
; Realms MUST be globally unique according to RFC 3261
|
|
; Set this to your host name or domain name
|
|
port=5060 ; UDP Port to bind to (SIP standard port is 5060)
|
|
bindaddr=0.0.0.0 ; IP address to bind to (0.0.0.0 binds to all)
|
|
srvlookup=yes ; Enable DNS SRV lookups on outbound calls
|
|
; Note: Asterisk only uses the first host
|
|
; in SRV records
|
|
; Disabling DNS SRV lookups disables the
|
|
; ability to place SIP calls based on domain
|
|
; names to some other SIP users on the Internet
|
|
|
|
;pedantic=yes ; Enable slow, pedantic checking for Pingtel
|
|
; and multiline formatted headers for strict
|
|
; SIP compatibility
|
|
;tos=184 ; Set IP QoS to either a keyword or numeric val
|
|
;tos=lowdelay ; lowdelay,throughput,reliability,mincost,none
|
|
;maxexpirey=3600 ; Max length of incoming registration we allow
|
|
;defaultexpirey=120 ; Default length of incoming/outoing registration
|
|
;notifymimetype=text/plain ; Allow overriding of mime type in NOTIFY
|
|
;videosupport=yes ; Turn on support for SIP video
|
|
|
|
;disallow=all ; First disallow all codecs
|
|
;allow=ulaw ; Allow codecs in order of preference
|
|
;allow=ilbc ; Note: codec order is respected only in [general]
|
|
;musicclass=default ; Sets the default music on hold class for all SIP calls
|
|
; This may also be set for individual users/peers
|
|
;language=en ; Default language setting for all users/peers
|
|
; This may also be set for individual users/peers
|
|
;relaxdtmf=yes ; Relax dtmf handling
|
|
;rtptimeout=60 ; Terminate call if 60 seconds of no RTP activity
|
|
; when we're not on hold
|
|
;rtpholdtimeout=300 ; Terminate call if 300 seconds of no RTP activity
|
|
; when we're on hold (must be > rtptimeout)
|
|
;trustrpid = no ; If Remote-Party-ID should be trusted
|
|
;useragent=Asterisk PBX ; Allows you to change the user agent string
|
|
;promiscredir = no ; If yes, allows 302 or REDIR to non-local SIP address
|
|
; Asterisk can register as a SIP user agent to a SIP proxy (provider)
|
|
; Format for the register statement is:
|
|
; register => user[:secret[:authuser]]@host[:port][/extension]
|
|
;
|
|
; If no extension is given, the 's' extension is used. The extension
|
|
; needs to be defined in extensions.conf to be able to accept calls
|
|
; from this SIP proxy (provider)
|
|
;
|
|
; host is either a host name defined in DNS or the name of a
|
|
; section defined below.
|
|
;
|
|
; Examples:
|
|
;
|
|
;register => 1234:password@mysipprovider.com
|
|
;
|
|
; This will pass incoming calls to the 's' extension
|
|
;
|
|
;
|
|
;register => 2345:password@sip_proxy/1234
|
|
;
|
|
; Register 2345 at sip provider 'sip_proxy'. Calls from this provider connect to local
|
|
; extension 1234 in extensions.conf default context, unless you define
|
|
; unless you configure a [sip_proxy] section below, and configure a context.
|
|
; Tip 1: Avoid assigning hostname to a sip.conf section like [provider.com]
|
|
; Tip 2: Use separate type=peer and type=user sections for SIP providers
|
|
; (instead of type=friend) if you have calls in both directions
|
|
|
|
|
|
;externip = 200.201.202.203 ; Address that we're going to put in outbound SIP messages
|
|
; if we're behind a NAT
|
|
|
|
; The externip and localnet is used
|
|
; when registering and communicating with other proxies
|
|
; that we're registered with
|
|
; You may add multiple local networks. A reasonable set of defaults
|
|
; are:
|
|
;localnet=192.168.0.0/255.255.0.0; All RFC 1918 addresses are local networks
|
|
;localnet=10.0.0.0/255.0.0.0 ; Also RFC1918
|
|
;localnet=172.16.0.0/12 ; Another RFC1918 with CIDR notation
|
|
;localnet=169.254.0.0/255.255.0.0 ;Zero conf local network
|
|
|
|
;-----------------------------------------------------------------------------------
|
|
; Users and peers have different settings available. Friends have all settings,
|
|
; since a friend is both a peer and a user
|
|
;
|
|
; User config options: Peer configuration:
|
|
; -------------------- -------------------
|
|
; context context
|
|
; permit permit
|
|
; deny deny
|
|
; auth auth
|
|
; secret secret
|
|
; md5secret md5secret
|
|
; dtmfmode dtmfmode
|
|
; canreinvite canreinvite
|
|
; nat nat
|
|
; callgroup callgroup
|
|
; pickupgroup pickupgroup
|
|
; language language
|
|
; allow allow
|
|
; disallow disallow
|
|
; insecure insecure
|
|
; trustrpid trustrpid
|
|
; promiscredir promiscredir
|
|
; callerid
|
|
; accountcode
|
|
; amaflags
|
|
; incominglimit
|
|
; outgoinglimit
|
|
; restrictcid
|
|
; mailbox
|
|
; username
|
|
; template
|
|
; fromdomain
|
|
; fromuser
|
|
; host
|
|
; mask
|
|
; port
|
|
; qualify
|
|
; defaultip
|
|
; rtptimeout
|
|
; rtpholdtimeout
|
|
|
|
;[sip_proxy]
|
|
; For incoming calls only. Example: FWD (Free World Dialup)
|
|
;type=user
|
|
;context=from-fwd
|
|
|
|
;[sip_proxy-out]
|
|
;type=peer ; we only want to call out, not be called
|
|
;secret=guessit
|
|
;username=yourusername
|
|
;fromuser=yourusername ; Many SIP providers require this!
|
|
;host=box.provider.com
|
|
|
|
;[grandstream1]
|
|
;type=friend ; either "friend" (peer+user), "peer" or "user"
|
|
;context=from-sip
|
|
;username=grandstream1 ; usually matches the [section] title
|
|
;fromuser=grandstream1 ; overrides the callerid, e.g. required by FWD
|
|
;callerid=John Doe <1234>
|
|
;host=192.168.0.23 ; we have a static but private IP address
|
|
;nat=no ; there is not NAT between phone and Asterisk
|
|
;canreinvite=yes ; allow RTP voice traffic to bypass Asterisk
|
|
;dtmfmode=info ; either RFC2833 or INFO for the BudgeTone
|
|
;outgoinglimit=1 ; disable callwaiting signal (2nd call to phone)
|
|
;incominglimit=1 ; permit only 1 outgoing call at a time
|
|
;mailbox=1234@default ; mailbox 1234 in voicemail context "default"
|
|
;disallow=all ; need to disallow=all before we can use allow=
|
|
;allow=ulaw ; Note: In user sections the order of codecs
|
|
; listed with allow= does NOT matter!
|
|
;allow=alaw
|
|
;allow=g723.1 ; Asterisk only supports g723.1 pass-thru!
|
|
;allow=g729 ; Pass-thru only unless g729 license obtained
|
|
|
|
|
|
;[xlite1]
|
|
;Turn off silence suppression in X-Lite ("Transmit Silence"=YES)!
|
|
;Note that Xlite sends NAT keep-alive packets, so qualify=yes is not needed
|
|
;type=friend
|
|
;username=xlite1
|
|
;callerid="Jane Smith" <5678>
|
|
;host=dynamic
|
|
;nat=yes ; X-Lite is behind a NAT router
|
|
;canreinvite=no ; Typically set to NO if behind NAT
|
|
;disallow=all
|
|
;allow=gsm ; GSM consumes far less bandwidth than ulaw
|
|
;allow=ulaw
|
|
;allow=alaw
|
|
|
|
|
|
;[snom]
|
|
;type=friend ; Friends place calls and receive calls
|
|
;context=from-sip ; Context for incoming calls from this user
|
|
;secret=blah
|
|
;host=dynamic ; This peer register with us
|
|
;dtmfmode=inband ; Choices are inband, rfc2833, or info
|
|
;defaultip=192.168.0.59 ; IP used until peer registers
|
|
;mailbox=1234,2345 ; Mailboxes for message waiting indicator
|
|
;restrictcid=yes ; To have the callerid restriced -> sent as ANI
|
|
;disallow=all
|
|
;allow=ulaw ; dtmfmode=inband only works with ulaw or alaw!
|
|
;mailbox=1234@context,2345 ; Mailbox(-es) for message waiting indicator
|
|
|
|
|
|
;[pingtel]
|
|
;type=friend
|
|
;username=pingtel
|
|
;secret=blah
|
|
;host=dynamic
|
|
;insecure=yes ; To match a peer based by IP address only and not peer
|
|
;insecure=very ; To allow registered hosts to call without re-authenticating
|
|
;qualify=1000 ; Consider it down if it's 1 second to reply
|
|
; Helps with NAT session
|
|
; qualify=yes uses default value
|
|
;callgroup=1,3-4 ; We are in caller groups 1,3,4
|
|
;pickupgroup=1,3-5 ; We can do call pick-p for call group 1,3,4,5
|
|
;defaultip=192.168.0.60 ; IP address to use if peer has not registred
|
|
|
|
;[cisco1]
|
|
;type=friend
|
|
;username=cisco1
|
|
;secret=blah
|
|
;qualify=200 ; Qualify peer is no more than 200ms away
|
|
;nat=yes ; This phone may be natted
|
|
; Send SIP and RTP to IP address that packet is
|
|
; received from instead of trusting SIP headers
|
|
;host=dynamic ; This device registers with us
|
|
;canreinvite=no ; Asterisk by default tries to redirect the
|
|
; RTP media stream (audio) to go directly from
|
|
; the caller to the callee. Some devices do not
|
|
; support this (especially if one of them is
|
|
; behind a NAT).
|
|
;defaultip=192.168.0.4
|
|
|
|
;[cisco2]
|
|
;type=friend
|
|
;username=cisco2
|
|
;fromuser=markster ; Specify user to put in "from" instead of callerid
|
|
;fromdomain=yourdomain.com ; Specify domain to put in "from" instead of callerid
|
|
; fromuser and fromdomain are used when Asterisk
|
|
; places calls to this account. It is not used for
|
|
; calls from this account.
|
|
;secret=blah
|
|
;host=dynamic
|
|
;defaultip=192.168.0.4
|
|
;amaflags=default ; Choices are default, omit, billing, documentation
|
|
;accountcode=markster ; Users may be associated with an accountcode to ease billing
|