git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@651 65c4cc65-6c06-0410-ace0-fbb531ad65f3
282 lines
8.1 KiB
Text
Executable file
282 lines
8.1 KiB
Text
Executable file
;
|
|
; Zapata telephony interface
|
|
;
|
|
; Configuration file
|
|
|
|
[channels]
|
|
;
|
|
; Default language
|
|
;
|
|
;language=en
|
|
;
|
|
; Default context
|
|
;
|
|
context=default
|
|
;
|
|
; Switchtype: Only used for PRI.
|
|
;
|
|
; national: National ISDN
|
|
; dms100: Nortel DMS100
|
|
; 4ess: AT&T 4ESS
|
|
; 5ess: Lucent 5ESS
|
|
; euroisdn: EuroISDN
|
|
;
|
|
switchtype=national
|
|
;
|
|
; PRI Dialplan: Only RARELY used for PRI.
|
|
;
|
|
; unknown: Unknown
|
|
; private: Private ISDN
|
|
; local: Local ISDN
|
|
; national: National ISDN
|
|
; international: International ISDN
|
|
;
|
|
;pridialplan=national
|
|
;
|
|
; Signalling method (default is fxs). Valid values:
|
|
; em: E & M
|
|
; em_w: E & M Wink
|
|
; featd: Feature Group D (The fake, Adtran style, DTMF)
|
|
; featdmf: Feature Group D (The real thing, MF (domestic, US))
|
|
; featb: Feature Group B (MF (domestic, US))
|
|
; fxs_ls: FXS (Loop Start)
|
|
; fxs_gs: FXS (Ground Start)
|
|
; fxs_ks: FXS (Kewl Start)
|
|
; fxo_ls: FXO (Loop Start)
|
|
; fxo_gs: FXO (Ground Start)
|
|
; fxo_ks: FXO (Kewl Start)
|
|
; pri_cpe: PRI signalling, CPE side
|
|
; pri_net: PRI signalling, Network side
|
|
; sf: SF (Inband Tone) Signalling
|
|
; sf_w: SF Wink
|
|
; sf_featd: SF Feature Group D (The fake, Adtran style, DTMF)
|
|
; sf_featdmf: SF Feature Group D (The real thing, MF (domestic, US))
|
|
; sf_featb: SF Feature Group B (MF (domestic, US))
|
|
; The following are used for Radio interfaces:
|
|
; fxs_rx: Receive audio/COR on an FXS kewlstart interface (FXO at the channel bank)
|
|
; fxs_tx: Transmit audio/PTT on an FXS loopstart interface (FXO at the channel bank)
|
|
; fxo_rx: Receive audio/COR on an FXO loopstart interface (FXS at the channel bank)
|
|
; fxo_tx: Transmit audio/PTT on an FXO groundstart interface (FXS at the channel bank)
|
|
; em_rx: Receive audio/COR on an E&M interface (1-way)
|
|
; em_tx: Transmit audio/PTT on an E&M interface (1-way)
|
|
; em_txrx: Receive audio/COR AND Transmit audio/PTT on an E&M interface (2-way)
|
|
; em_rxtx: same as em_txrx (for our dyslexic friends)
|
|
; sf_rx: Receive audio/COR on an SF interface (1-way)
|
|
; sf_tx: Transmit audio/PTT on an SF interface (1-way)
|
|
; sf_txrx: Receive audio/COR AND Transmit audio/PTT on an SF interface (2-way)
|
|
; sf_rxtx: same as sf_txrx (for our dyslexic friends)
|
|
;
|
|
signalling=fxo_ls
|
|
;
|
|
; A variety of timing parameters can be specified as well
|
|
; Including:
|
|
; prewink: Pre-wink time
|
|
; preflash: Pre-flash time
|
|
; wink: Wink time
|
|
; flash: Flash time
|
|
; start: Start time
|
|
; rxwink: Receiver wink time
|
|
; rxflash: Receiver flashtime
|
|
; debounce: Debounce timing
|
|
;
|
|
rxwink=300 ; Atlas seems to use long (250ms) winks
|
|
;
|
|
; Whether or not to use caller ID
|
|
;
|
|
usecallerid=yes
|
|
;
|
|
; Whether or not to hide outgoing caller ID (Override with *67 or *82)
|
|
;
|
|
hidecallerid=no
|
|
;
|
|
; Whether or not to enable call waiting on FXO lines
|
|
;
|
|
callwaiting=yes
|
|
;
|
|
; Support Caller*ID on Call Waiting
|
|
;
|
|
callwaitingcallerid=yes
|
|
;
|
|
; Support three-way calling
|
|
;
|
|
threewaycalling=yes
|
|
;
|
|
; Support flash-hook call transfer (requires three way calling)
|
|
;
|
|
transfer=yes
|
|
;
|
|
; Support call forward variable
|
|
;
|
|
cancallforward=yes
|
|
;
|
|
; Whether or not to support Call Return (*69)
|
|
;
|
|
callreturn=yes
|
|
;
|
|
; Stutter dialtone support: If a mailbox is specified, then when voicemail
|
|
; is received in that mailbox, taking the phone off hook will cause
|
|
; a stutter dialtone instead of a normal one
|
|
;
|
|
;mailbox=1234
|
|
;
|
|
; Enable echo cancellation
|
|
; Use either "yes", "no", or a power of two from 32 to 256 if you wish
|
|
; to actually set the number of taps of cancellation.
|
|
;
|
|
echocancel=yes
|
|
;
|
|
; Generally, it is not necessary (and in fact undesirable) to echo cancel
|
|
; when the circuit path is entirely TDM. You may, however, reverse this
|
|
; behavior by enabling the echo cancel during pure TDM bridging below.
|
|
;
|
|
echocancelwhenbridged=yes
|
|
;
|
|
; If you are having trouble with DTMF detection, you can relax the
|
|
; DTMF detection parameters. Relaxing them may make the DTMF detector
|
|
; more likely to have "talkoff" where DTMF is detected when it
|
|
; shouldn't be.
|
|
;
|
|
;relaxdtmf=yes
|
|
;
|
|
; You may also set the default receive and transmit gains (in dB)
|
|
;
|
|
rxgain=0.0
|
|
txgain=0.0
|
|
;
|
|
; Logical groups can be assigned to allow outgoing rollover. Groups
|
|
; range from 0 to 31, and multiple groups can be specified.
|
|
;
|
|
group=1
|
|
;
|
|
; Ring groups (a.k.a. call groups) and pickup groups. If a phone is ringing
|
|
; and it is a member of a group which is one of your pickup groups, then
|
|
; you can answer it by picking up and dialing *8#. For simple offices, just
|
|
; make these both the same
|
|
;
|
|
callgroup=1
|
|
pickupgroup=1
|
|
|
|
;
|
|
; Specify whether the channel should be answered immediately or
|
|
; if the simple switch should provide dialtone, read digits, etc.
|
|
;
|
|
immediate=no
|
|
;
|
|
; CallerID can be set to "asreceived" or a specific number
|
|
; if you want to override it. Note that "asreceived" only
|
|
; applies to trunk interfaces.
|
|
;
|
|
;callerid=2564286000
|
|
;
|
|
; AMA flags affects the recording of Call Detail Records. If specified
|
|
; it may be 'default', 'omit', 'billing', or 'documentation'.
|
|
;
|
|
;amaflags=default
|
|
;
|
|
; Channels may be associated with an account code to ease
|
|
; billing
|
|
;
|
|
;accountcode=lss0101
|
|
;
|
|
; ADSI (Analog Display Services Interface) can be enabled on a per-channel
|
|
; basis if you have (or may have) ADSI compatible CPE equipment
|
|
;
|
|
;adsi=yes
|
|
;
|
|
; On trunk interfaces (FXS) and E&M interfaces (E&M, Wink, Feature Group D
|
|
; etc, it can be useful to perform busy detection either in an effort to
|
|
; detect hangup or for detecting busies
|
|
;
|
|
;busydetect=yes
|
|
;
|
|
; On trunk interfaces (FXS) it can be useful to attempt to follow the progress
|
|
; of a call through RINGING, BUSY, and ANSWERING. If turned on, call
|
|
; progress attempts to determine answer, busy, and ringing on phone lines.
|
|
; This feature is HIGHLY EXPERIMENTAL and can easily detect false answers,
|
|
; so don't count on it being very accurate. Also, it is ONLY configured for
|
|
; standard U.S. tones
|
|
;
|
|
;callprogress=yes
|
|
;
|
|
; Select which class of music to use for music on hold. If not specified
|
|
; then the default will be used.
|
|
;
|
|
;musiconhold=default
|
|
;
|
|
; PRI channels can have an idle extension and a minunused number. So long
|
|
; as at least "minunused" channels are idle, chan_zap will try to call
|
|
; "idledial" on them, and then dump them into the PBX in the "idleext"
|
|
; extension (which is of the form exten@context). When channels are needed
|
|
; the "idle" calls are disconnected (so long as there are at least "minidle"
|
|
; calls still running, of course) to make more channels available. The
|
|
; primary use of this is to create a dynamic service, where idle channels
|
|
; are bundled through multilink PPP, thus more efficiently utilizing
|
|
; combined voice/data services than conventional fixed mappings/muxings.
|
|
;
|
|
;idledial=6999
|
|
;idleext=6999@dialout
|
|
;minunused=2
|
|
;minidle=1
|
|
;
|
|
; Each channel consists of the channel number or range. It
|
|
; inherits the parameters that were specified above its declaration
|
|
;
|
|
;callerid="Green Phone"<(256) 428-6121>
|
|
;channel => 1
|
|
;callerid="Black Phone"<(256) 428-6122>
|
|
;channel => 2
|
|
;callerid="CallerID Phone" <(256) 428-6123>
|
|
;callerid="CallerID Phone" <(630) 372-1564>
|
|
;callerid="CallerID Phone" <(256) 704-4666>
|
|
;channel => 3
|
|
;callerid="Pac Tel Phone" <(256) 428-6124>
|
|
;channel => 4
|
|
;callerid="Uniden Dead" <(256) 428-6125>
|
|
;channel => 5
|
|
;callerid="Cortelco 2500" <(256) 428-6126>
|
|
;channel => 6
|
|
;callerid="Main TA 750" <(256) 428-6127>
|
|
;channel => 44
|
|
;
|
|
; For example, maybe we have some other channels
|
|
; which start out in a different context and use
|
|
; E & M signalling instead.
|
|
;
|
|
;context=remote
|
|
;sigalling=em
|
|
;channel => 15
|
|
;channel => 16
|
|
|
|
;signalling=em_w
|
|
;
|
|
; All those in group 0 I'll use for outgoing calls
|
|
;
|
|
; Strip most significant digit (9) before sending
|
|
;
|
|
;stripmsd=1
|
|
;callerid=asreceived
|
|
;group=0
|
|
;signalling=fxs_ls
|
|
;channel => 45
|
|
|
|
;signalling=fxo_ls
|
|
;group=1
|
|
;callerid="Joe Schmoe" <(256) 428-6131>
|
|
;channel => 25
|
|
;callerid="Megan May" <(256) 428-6132>
|
|
;channel => 26
|
|
;callerid="Suzy Queue" <(256) 428-6233>
|
|
;channel => 27
|
|
;callerid="Larry Moe" <(256) 428-6234>
|
|
;channel => 28
|
|
;
|
|
; Sample PRI (CPE) config: Specify the switchtype, the signalling as
|
|
; either pri_cpe or pri_net for CPE or Network termination, and generally
|
|
; you will want to create a single "group" for all channels of the PRI.
|
|
;
|
|
; switchtype = national
|
|
; signalling = pri_cpe
|
|
; group = 2
|
|
; channel => 1-23
|
|
|