git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@36298 65c4cc65-6c06-0410-ace0-fbb531ad65f3
399 lines
8.5 KiB
Text
399 lines
8.5 KiB
Text
;
|
|
; chan_misdn sample config
|
|
;
|
|
|
|
; general section:
|
|
;
|
|
; for debugging and general setup, things that are not bound to port groups
|
|
;
|
|
|
|
[general]
|
|
;
|
|
; Sets the Path to the misdn-init.conf (for nt_ptp mode checking)
|
|
;
|
|
misdn_init=/etc/misdn-init.conf
|
|
|
|
; set debugging flag:
|
|
; 0 - No Debug
|
|
; 1 - mISDN Messages and * - Messages, and * - State changes
|
|
; 2 - Messages + Message specific Informations (e.g. bearer capability)
|
|
; 3 - very Verbose, the above + lots of Driver specific infos
|
|
; 4 - even more Verbose than 3
|
|
;
|
|
; default value: 0
|
|
;
|
|
debug=0
|
|
|
|
|
|
|
|
; set debugging file and flags for mISDNuser (NT-Stack)
|
|
;
|
|
; flags can be or'ed with the following values:
|
|
;
|
|
; DBGM_NET 0x00000001
|
|
; DBGM_MSG 0x00000002
|
|
; DBGM_FSM 0x00000004
|
|
; DBGM_TEI 0x00000010
|
|
; DBGM_L2 0x00000020
|
|
; DBGM_L3 0x00000040
|
|
; DBGM_L3DATA 0x00000080
|
|
; DBGM_BC 0x00000100
|
|
; DBGM_TONE 0x00000200
|
|
; DBGM_BCDATA 0x00000400
|
|
; DBGM_MAN 0x00001000
|
|
; DBGM_APPL 0x00002000
|
|
; DBGM_ISDN 0x00004000
|
|
; DBGM_SOCK 0x00010000
|
|
; DBGM_CONN 0x00020000
|
|
; DBGM_CDATA 0x00040000
|
|
; DBGM_DDATA 0x00080000
|
|
; DBGM_SOUND 0x00100000
|
|
; DBGM_SDATA 0x00200000
|
|
; DBGM_TOPLEVEL 0x40000000
|
|
; DBGM_ALL 0xffffffff
|
|
;
|
|
|
|
ntdebugflags=0
|
|
ntdebugfile=/var/log/misdn-nt.log
|
|
|
|
; the big trace
|
|
;
|
|
; default value: [not set]
|
|
;
|
|
;tracefile=/var/log/asterisk/misdn.log
|
|
|
|
|
|
; set to yes if you want mISDN_dsp to bridge the calls in HW
|
|
;
|
|
; default value: yes
|
|
;
|
|
bridging=no
|
|
|
|
|
|
;
|
|
; watches the L1s of every port. If one l1 is down it tries to
|
|
; get it up. The timeout is given in seconds. with 0 as value it
|
|
; does not watch the l1 at all
|
|
;
|
|
; default value: 0
|
|
;
|
|
; this option is only read at loading time of chan_misdn,
|
|
; which means you need to unload and load chan_misdn to change the
|
|
; value, an asterisk restart should do the trick
|
|
;
|
|
l1watcher_timeout=0
|
|
|
|
; stops dialtone after getting first digit on nt Port
|
|
;
|
|
; default value: yes
|
|
;
|
|
stop_tone_after_first_digit=yes
|
|
|
|
; wether to append overlapdialed Digits to Extension or not
|
|
;
|
|
; default value: yes
|
|
;
|
|
append_digits2exten=yes
|
|
|
|
;;; CRYPTION STUFF
|
|
|
|
; Wether to look for dynamic crypting attempt
|
|
;
|
|
; default value: no
|
|
;
|
|
dynamic_crypt=no
|
|
|
|
; crypt_prefix, what is used for crypting Protocol
|
|
;
|
|
; default value: [not set]
|
|
;
|
|
crypt_prefix=**
|
|
|
|
; Keys for cryption, you reference them in the dialplan
|
|
; later also in dynamic encr.
|
|
;
|
|
; default value: [not set]
|
|
;
|
|
crypt_keys=test,muh
|
|
|
|
; users sections:
|
|
;
|
|
; name your sections as you which but not "general" !
|
|
; the secions are Groups, you can dial out in extensions.conf
|
|
; with Dial(mISDN/g:extern/101) where extern is a section name,
|
|
; chan_misdn tries every port in this section to find a
|
|
; new free channel
|
|
;
|
|
|
|
; The default section is not a group section, it just contains config elements
|
|
; which are inherited by group sections.
|
|
;
|
|
|
|
[default]
|
|
|
|
; define your default context here
|
|
;
|
|
; default value: default
|
|
;
|
|
context=misdn
|
|
|
|
; language
|
|
;
|
|
; default value: en
|
|
;
|
|
language=en
|
|
|
|
;
|
|
; sets the musiconhold class
|
|
;
|
|
musicclass=default
|
|
|
|
;
|
|
; Either if we should produce DTMF Tones ourselve
|
|
;
|
|
senddtmf=yes
|
|
|
|
;
|
|
; If we should generate Ringing for chan_sip and others
|
|
;
|
|
far_alerting=no
|
|
|
|
|
|
;
|
|
; here you can define which bearers should be allowed
|
|
;
|
|
allowed_bearers=all
|
|
|
|
; Prefixes for national and international, those are put before the
|
|
; oad if an according dialplan is set by the other end.
|
|
;
|
|
; default values: nationalprefix : 0
|
|
; internationalprefix : 00
|
|
;
|
|
nationalprefix=0
|
|
internationalprefix=00
|
|
|
|
; set rx/tx gains between -8 and 8 to change the RX/TX Gain
|
|
;
|
|
; default values: rxgain: 0
|
|
; txgain: 0
|
|
;
|
|
rxgain=0
|
|
txgain=0
|
|
|
|
; some telcos espacially in NL seem to need this set to yes, also in
|
|
; switzerland this seems to be important
|
|
;
|
|
; default value: no
|
|
;
|
|
te_choose_channel=no
|
|
|
|
|
|
|
|
;
|
|
; This option defines, if chan_misdn should check the L1 on a PMP
|
|
; before makeing a group call on it. The L1 may go down for PMP Ports
|
|
; so we might need this.
|
|
; But be aware! a broken or plugged off cable might be used for a group call
|
|
; as well, since chan_misdn has no chance to distinguish if the L1 is down
|
|
; because of a lost Link or because the Provider shut it down...
|
|
;
|
|
; default: yes
|
|
;
|
|
pmp_l1_check=yes
|
|
|
|
;
|
|
; Send Setup_Acknowledge on incoming calls anyway (instead of PROCEEDING),
|
|
; this requests additional Infos, so we can waitfordigits
|
|
; without much issues. This works only for PTP Ports
|
|
;
|
|
; default value: no
|
|
;
|
|
need_more_infos=no
|
|
|
|
; set the method to use for channel selection:
|
|
; standard - always choose the first free channel with the lowest number
|
|
; round_robin - use the round robin algorithm to select a channel. use this
|
|
; if you want to balance your load.
|
|
;
|
|
; default value: standard
|
|
;
|
|
method=standard
|
|
|
|
;
|
|
; dialplan means Type Of Number in ISDN Terms (for outgoing calls)
|
|
;
|
|
; there are different types of the dialplan:
|
|
;
|
|
; dialplan -> outgoing Number
|
|
; localdialplan -> callerid
|
|
; cpndialplan -> connected party number
|
|
;
|
|
; dialplan options:
|
|
;
|
|
; 0 - unknown
|
|
; 1 - International
|
|
; 2 - National
|
|
; 4 - Subscriber
|
|
;
|
|
; This setting is used for outgoing calls
|
|
;
|
|
; default value: 0
|
|
;
|
|
dialplan=0
|
|
localdialplan=0
|
|
cpndialplan=0
|
|
|
|
|
|
|
|
;
|
|
; turn this to no if you don't mind correct handling of Progress Indicators
|
|
;
|
|
early_bconnect=yes
|
|
|
|
|
|
;
|
|
; turn this on if you like to send Tone Indications to a Incoming
|
|
; isdn channel on a TE Port. Rarely used, only if the Telco allows
|
|
; you to send indications by yourself, normally the Telco sends the
|
|
; indications to the remote party.
|
|
;
|
|
; default: no
|
|
;
|
|
incoming_early_audio=no
|
|
|
|
; uncomment the following to get into s extension at extension conf
|
|
; there you can use DigitTimeout if you can't or don't want to use
|
|
; isdn overlap dial.
|
|
; note: This will jump into the s exten for every exten!
|
|
;
|
|
; default value: no
|
|
;
|
|
;always_immediate=no
|
|
|
|
; uncomment the following if you want callers which called exactly the
|
|
; base number (so no extension is set) jump to the s extension.
|
|
; if the user dials something more it jumps to the correct extension
|
|
; instead
|
|
;
|
|
; default value: no
|
|
;
|
|
;immediate=no
|
|
|
|
; uncomment the following to have hold and retrieve support
|
|
;
|
|
; default value: no
|
|
;
|
|
;hold_allowed=yes
|
|
|
|
; Pickup and Callgroup
|
|
;
|
|
; deafult values: not set = 0
|
|
; range: 0-63
|
|
;
|
|
;callgroup=1
|
|
;pickupgroup=1
|
|
|
|
|
|
;
|
|
; these are the exact isdn screening and presentation indicators
|
|
; if -1 is given for both values the presentation indicators are used
|
|
; from asterisks SetCallerPres application.
|
|
; s=0, p=0 -> callerid presented not screened
|
|
; s=1, p=1 -> callerid presented but screened (the remote end does not see it!)
|
|
;
|
|
; defaule values s=-1, p=-1
|
|
presentation=-1
|
|
screen=-1
|
|
|
|
; this enables echocancellation, with the given number of taps
|
|
; be aware, move this setting only to outgoing portgroups!
|
|
; A value of zero turns echocancellation off.
|
|
;
|
|
; possible values are: 0,32,64,128,256,yes(=128),no(=0)
|
|
;
|
|
; default value: no
|
|
;
|
|
;echocancel=no
|
|
|
|
; this disables echocancellation when the call is bridged between
|
|
; mISDN channels
|
|
;
|
|
; default value: no
|
|
;
|
|
echocancelwhenbridged=no
|
|
|
|
|
|
; Set this to no to disable echotraining. You can enter a number > 10
|
|
; the value is a multiple of 0.125 ms.
|
|
;
|
|
; default value: no
|
|
; yes = 2000
|
|
; no = 0
|
|
;
|
|
echotraining=no
|
|
|
|
;
|
|
; chan_misdns jitterbuffer, default 4000
|
|
;
|
|
jitterbuffer=4000
|
|
|
|
;
|
|
; change this threshold to enable dejitter functionality
|
|
;
|
|
jitterbuffer_upper_threshold=0
|
|
|
|
|
|
;
|
|
; change this to yes, if you want to bridge a mISDN data channel to
|
|
; another channel type or to an application.
|
|
;
|
|
hdlc=no
|
|
|
|
|
|
;
|
|
; defines the maximum amount of incoming calls per port for
|
|
; this group. Calls which exceed the maximum will be marked with
|
|
; the channel varible MAX_OVERFLOW. It will contain the amount of
|
|
; overflowed calls
|
|
;
|
|
max_incoming=-1
|
|
|
|
;
|
|
; defines the maximum amount of outgoing calls per port for this group
|
|
; exceeding calls will be rejected
|
|
;
|
|
max_outgoing=-1
|
|
|
|
[intern]
|
|
; define your ports, e.g. 1,2 (depends on mISDN-driver loading order)
|
|
ports=1,2
|
|
; context where to go to when incoming Call on one of the above ports
|
|
context=Intern
|
|
|
|
[internPP]
|
|
;
|
|
; adding the postfix 'ptp' to a port number is obsolete now, chan_misdn
|
|
; parses /etc/misdn-init.conf and sets the ptp mode to the corresponding
|
|
; configs. For backwards compatibility you can still set ptp here.
|
|
;
|
|
ports=3
|
|
|
|
[first_extern]
|
|
; again port defs
|
|
ports=4
|
|
; again a context for incomming calls
|
|
context=Extern1
|
|
; msns for te ports, listen on those numbers on the above ports, and
|
|
; indicate the incoming calls to asterisk
|
|
; here you can give a comma seperated list or simply an '*' for
|
|
; any msn.
|
|
msns=*
|
|
|
|
; here an example with given msns
|
|
[second_extern]
|
|
ports=5
|
|
context=Extern2
|
|
callerid=15
|
|
msns=102,144,101,104
|