https://origsvn.digium.com/svn/asterisk/branches/1.4 ........ r206487 | rmudgett | 2009-07-14 11:44:47 -0500 (Tue, 14 Jul 2009) | 28 lines Fixes several call transfer issues with chan_misdn. * issue #14355 - Crash if attempt to transfer a call to an application. Masquerade the other pair of the four asterisk channels involved in the two calls. The held call already must be a bridged call (not an applicaton) or it would have been rejected. * issue #14692 - Held calls are not automatically cleared after transfer. Allow the core to initate disconnect of held calls to the ISDN port. This also fixes a similar case where the party on hold hangs up before being transferred or taken off hold. * JIRA ABE-1903 - Orphaned held calls left in music-on-hold. Do not simply block passing the hangup event on held calls to asterisk core. * Fixed to allow held calls to be transferred to ringing calls. Previously, held calls could only be transferred to connected calls. * Eliminated unused call states to simplify hangup code. * Eliminated most uses of "holded" because it is not a word. (closes issue #14355) (closes issue #14692) Reported by: sodom Patches: misdn_xfer_v14_r205839.patch uploaded by rmudgett (license 664) Tested by: rmudgett ........ git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@206489 65c4cc65-6c06-0410-ace0-fbb531ad65f3
841 lines
23 KiB
C
841 lines
23 KiB
C
/*
|
|
* Chan_Misdn -- Channel Driver for Asterisk
|
|
*
|
|
* Interface to mISDN
|
|
*
|
|
* Copyright (C) 2004, Christian Richter
|
|
*
|
|
* Christian Richter <crich@beronet.com>
|
|
*
|
|
* This program is free software, distributed under the terms of
|
|
* the GNU General Public License
|
|
*/
|
|
|
|
/*! \file
|
|
* \brief Interface to mISDN
|
|
*
|
|
* \author Christian Richter <crich@beronet.com>
|
|
*/
|
|
|
|
#ifndef TE_LIB
|
|
#define TE_LIB
|
|
|
|
#include <mISDNuser/suppserv.h>
|
|
|
|
/** For initialization usage **/
|
|
/* typedef int ie_nothing_t ;*/
|
|
/** end of init usage **/
|
|
|
|
|
|
/*
|
|
* uncomment the following to make chan_misdn create
|
|
* record files in /tmp/misdn-{rx|tx}-PortChannel format
|
|
* */
|
|
|
|
/*#define MISDN_SAVE_DATA*/
|
|
|
|
#ifdef WITH_BEROEC
|
|
typedef int beroec_t;
|
|
|
|
|
|
enum beroec_type {
|
|
BEROEC_FULLBAND=0,
|
|
BEROEC_SUBBAND,
|
|
BEROEC_FASTSUBBAND
|
|
};
|
|
|
|
void beroec_init(void);
|
|
void beroec_exit(void);
|
|
beroec_t *beroec_new(int tail, enum beroec_type type, int anti_howl,
|
|
int tonedisable, int zerocoeff, int adapt, int nlp);
|
|
|
|
void beroec_destroy(beroec_t *ec);
|
|
int beroec_cancel_alaw_chunk(beroec_t *ec,
|
|
char *send,
|
|
char *receive,
|
|
int len);
|
|
|
|
int beroec_version(void);
|
|
#endif
|
|
|
|
|
|
|
|
enum tone_e {
|
|
TONE_NONE=0,
|
|
TONE_DIAL,
|
|
TONE_ALERTING,
|
|
TONE_FAR_ALERTING,
|
|
TONE_BUSY,
|
|
TONE_HANGUP,
|
|
TONE_CUSTOM,
|
|
TONE_FILE
|
|
};
|
|
|
|
|
|
|
|
#define MAX_BCHANS 31
|
|
|
|
enum bchannel_state {
|
|
BCHAN_CLEANED=0,
|
|
BCHAN_EMPTY,
|
|
BCHAN_SETUP,
|
|
BCHAN_SETUPED,
|
|
BCHAN_ACTIVE,
|
|
BCHAN_ACTIVATED,
|
|
BCHAN_BRIDGE,
|
|
BCHAN_BRIDGED,
|
|
BCHAN_RELEASE,
|
|
BCHAN_RELEASED,
|
|
BCHAN_CLEAN,
|
|
BCHAN_CLEAN_REQUEST,
|
|
BCHAN_ERROR
|
|
};
|
|
|
|
|
|
enum misdn_err_e {
|
|
ENOCHAN=1
|
|
};
|
|
|
|
enum mISDN_NUMBER_PLAN {
|
|
NUMPLAN_UNKNOWN = 0x0,
|
|
NUMPLAN_ISDN = 0x1, /* ISDN/Telephony numbering plan E.164 */
|
|
NUMPLAN_DATA = 0x3, /* Data numbering plan X.121 */
|
|
NUMPLAN_TELEX = 0x4, /* Telex numbering plan F.69 */
|
|
NUMPLAN_NATIONAL = 0x8,
|
|
NUMPLAN_PRIVATE = 0x9
|
|
};
|
|
|
|
enum mISDN_NUMBER_TYPE {
|
|
NUMTYPE_UNKNOWN = 0x0,
|
|
NUMTYPE_INTERNATIONAL = 0x1,
|
|
NUMTYPE_NATIONAL = 0x2,
|
|
NUMTYPE_NETWORK_SPECIFIC = 0x3,
|
|
NUMTYPE_SUBSCRIBER = 0x4,
|
|
NUMTYPE_ABBREVIATED = 0x5
|
|
};
|
|
|
|
enum event_response_e {
|
|
RESPONSE_IGNORE_SETUP_WITHOUT_CLOSE,
|
|
RESPONSE_IGNORE_SETUP,
|
|
RESPONSE_RELEASE_SETUP,
|
|
RESPONSE_ERR,
|
|
RESPONSE_OK
|
|
};
|
|
|
|
|
|
enum event_e {
|
|
EVENT_NOTHING,
|
|
EVENT_TONE_GENERATE,
|
|
EVENT_BCHAN_DATA,
|
|
EVENT_BCHAN_ACTIVATED,
|
|
EVENT_BCHAN_ERROR,
|
|
EVENT_CLEANUP,
|
|
EVENT_PROCEEDING,
|
|
EVENT_PROGRESS,
|
|
EVENT_SETUP,
|
|
EVENT_REGISTER,
|
|
EVENT_ALERTING,
|
|
EVENT_CONNECT,
|
|
EVENT_SETUP_ACKNOWLEDGE,
|
|
EVENT_CONNECT_ACKNOWLEDGE ,
|
|
EVENT_USER_INFORMATION,
|
|
EVENT_SUSPEND_REJECT,
|
|
EVENT_RESUME_REJECT,
|
|
EVENT_HOLD,
|
|
EVENT_SUSPEND,
|
|
EVENT_RESUME,
|
|
EVENT_HOLD_ACKNOWLEDGE,
|
|
EVENT_SUSPEND_ACKNOWLEDGE,
|
|
EVENT_RESUME_ACKNOWLEDGE,
|
|
EVENT_HOLD_REJECT,
|
|
EVENT_RETRIEVE,
|
|
EVENT_RETRIEVE_ACKNOWLEDGE,
|
|
EVENT_RETRIEVE_REJECT,
|
|
EVENT_DISCONNECT,
|
|
EVENT_RESTART,
|
|
EVENT_RELEASE,
|
|
EVENT_RELEASE_COMPLETE,
|
|
EVENT_FACILITY,
|
|
EVENT_NOTIFY,
|
|
EVENT_STATUS_ENQUIRY,
|
|
EVENT_INFORMATION,
|
|
EVENT_STATUS,
|
|
EVENT_TIMEOUT,
|
|
EVENT_DTMF_TONE,
|
|
EVENT_NEW_L3ID,
|
|
EVENT_NEW_BC,
|
|
EVENT_PORT_ALARM,
|
|
EVENT_NEW_CHANNEL,
|
|
EVENT_UNKNOWN
|
|
};
|
|
|
|
|
|
enum ie_name_e {
|
|
IE_DUMMY,
|
|
IE_LAST
|
|
};
|
|
|
|
enum { /* bearer capability */
|
|
INFO_CAPABILITY_SPEECH=0,
|
|
INFO_CAPABILITY_AUDIO_3_1K=0x10 ,
|
|
INFO_CAPABILITY_AUDIO_7K=0x11 ,
|
|
INFO_CAPABILITY_VIDEO =0x18,
|
|
INFO_CAPABILITY_DIGITAL_UNRESTRICTED =0x8,
|
|
INFO_CAPABILITY_DIGITAL_RESTRICTED =0x09,
|
|
INFO_CAPABILITY_DIGITAL_UNRESTRICTED_TONES
|
|
};
|
|
|
|
enum { /* progress indicators */
|
|
INFO_PI_CALL_NOT_E2E_ISDN =0x01,
|
|
INFO_PI_CALLED_NOT_ISDN =0x02,
|
|
INFO_PI_CALLER_NOT_ISDN =0x03,
|
|
INFO_PI_CALLER_RETURNED_TO_ISDN =0x04,
|
|
INFO_PI_INBAND_AVAILABLE =0x08,
|
|
INFO_PI_DELAY_AT_INTERF =0x0a,
|
|
INFO_PI_INTERWORKING_WITH_PUBLIC =0x10,
|
|
INFO_PI_INTERWORKING_NO_RELEASE =0x11,
|
|
INFO_PI_INTERWORKING_NO_RELEASE_PRE_ANSWER =0x12,
|
|
INFO_PI_INTERWORKING_NO_RELEASE_POST_ANSWER =0x13
|
|
};
|
|
|
|
/*!
|
|
* \brief Q.931 encoded redirecting reason
|
|
*/
|
|
enum mISDN_REDIRECTING_REASON {
|
|
mISDN_REDIRECTING_REASON_UNKNOWN = 0x0,
|
|
/*! Call forwarding busy or called DTE busy */
|
|
mISDN_REDIRECTING_REASON_CALL_FWD_BUSY = 0x1,
|
|
/*! Call forwarding no reply */
|
|
mISDN_REDIRECTING_REASON_NO_REPLY = 0x2,
|
|
/*! Call deflection */
|
|
mISDN_REDIRECTING_REASON_DEFLECTION = 0x4,
|
|
/*! Called DTE out of order */
|
|
mISDN_REDIRECTING_REASON_OUT_OF_ORDER = 0x9,
|
|
/*! Call forwarding by the called DTE */
|
|
mISDN_REDIRECTING_REASON_CALL_FWD_DTE = 0xA,
|
|
/*! Call forwarding unconditional or systematic call redirection */
|
|
mISDN_REDIRECTING_REASON_CALL_FWD = 0xF
|
|
};
|
|
|
|
/*!
|
|
* \brief Notification description code enumeration
|
|
*/
|
|
enum mISDN_NOTIFY_CODE {
|
|
mISDN_NOTIFY_CODE_INVALID = -1,
|
|
/*! Call is placed on hold (Q.931) */
|
|
mISDN_NOTIFY_CODE_USER_SUSPEND = 0x00,
|
|
/*! Call is taken off of hold (Q.931) */
|
|
mISDN_NOTIFY_CODE_USER_RESUME = 0x01,
|
|
/*! Call is diverting (EN 300 207-1 Section 7.2.1) */
|
|
mISDN_NOTIFY_CODE_CALL_IS_DIVERTING = 0x7B,
|
|
/*! Call diversion is enabled (cfu, cfb, cfnr) (EN 300 207-1 Section 7.2.1) */
|
|
mISDN_NOTIFY_CODE_DIVERSION_ACTIVATED = 0x68,
|
|
/*! Call transfer, alerting (EN 300 369-1 Section 7.2) */
|
|
mISDN_NOTIFY_CODE_CALL_TRANSFER_ALERTING = 0x69,
|
|
/*! Call transfer, active(answered) (EN 300 369-1 Section 7.2) */
|
|
mISDN_NOTIFY_CODE_CALL_TRANSFER_ACTIVE = 0x6A,
|
|
};
|
|
|
|
enum { /*CODECS*/
|
|
INFO_CODEC_ULAW=2,
|
|
INFO_CODEC_ALAW=3
|
|
};
|
|
|
|
|
|
enum layer_e {
|
|
L3,
|
|
L2,
|
|
L1,
|
|
UNKNOWN
|
|
};
|
|
|
|
/*! Maximum phone number (address) length plus null terminator */
|
|
#define MISDN_MAX_NUMBER_LEN (31 + 1)
|
|
|
|
/*! Maximum name length plus null terminator (From ECMA-164) */
|
|
#define MISDN_MAX_NAME_LEN (50 + 1)
|
|
|
|
/*! Maximum subaddress length plus null terminator */
|
|
#define MISDN_MAX_SUBADDRESS_LEN (23 + 1)
|
|
|
|
/*! Maximum keypad facility content length plus null terminator */
|
|
#define MISDN_MAX_KEYPAD_LEN (31 + 1)
|
|
|
|
/*! \brief Dialed/Called information struct */
|
|
struct misdn_party_dialing {
|
|
/*! \brief Type-of-number in ISDN terms for the dialed/called number */
|
|
enum mISDN_NUMBER_TYPE number_type;
|
|
|
|
/*! \brief Type-of-number numbering plan. */
|
|
enum mISDN_NUMBER_PLAN number_plan;
|
|
|
|
/*! \brief Dialed/Called Phone Number (Address) */
|
|
char number[MISDN_MAX_NUMBER_LEN];
|
|
|
|
/*! \brief Dialed/Called Subaddress number */
|
|
char subaddress[MISDN_MAX_SUBADDRESS_LEN];
|
|
};
|
|
|
|
/*! \brief Connected-Line/Calling/Redirecting ID info struct */
|
|
struct misdn_party_id {
|
|
/*! \brief Number presentation restriction code
|
|
* 0=Allowed, 1=Restricted, 2=Unavailable
|
|
*/
|
|
int presentation;
|
|
|
|
/*! \brief Number screening code
|
|
* 0=Unscreened, 1=Passed Screen, 2=Failed Screen, 3=Network Number
|
|
*/
|
|
int screening;
|
|
|
|
/*! \brief Type-of-number in ISDN terms for the number */
|
|
enum mISDN_NUMBER_TYPE number_type;
|
|
|
|
/*! \brief Type-of-number numbering plan. */
|
|
enum mISDN_NUMBER_PLAN number_plan;
|
|
|
|
/*! \brief Subscriber Name
|
|
* \note The name is currently obtained from Asterisk for
|
|
* potential use in display ie's since basic ISDN does
|
|
* not support names directly.
|
|
*/
|
|
char name[MISDN_MAX_NAME_LEN];
|
|
|
|
/*! \brief Phone number (Address) */
|
|
char number[MISDN_MAX_NUMBER_LEN];
|
|
|
|
/*! \brief Subaddress number */
|
|
char subaddress[MISDN_MAX_SUBADDRESS_LEN];
|
|
};
|
|
|
|
/*! \brief Redirecting information struct */
|
|
struct misdn_party_redirecting {
|
|
/*! \brief Who is redirecting the call (Sent to the party the call is redirected toward) */
|
|
struct misdn_party_id from;
|
|
|
|
/*! \brief Where the call is being redirected toward (Sent to the calling party) */
|
|
struct misdn_party_id to;
|
|
|
|
/*! \brief Reason a call is being redirected (Q.931 field value) */
|
|
enum mISDN_REDIRECTING_REASON reason;
|
|
|
|
/*! \brief Number of times the call has been redirected */
|
|
int count;
|
|
|
|
/*! \brief TRUE if the redirecting.to information has changed */
|
|
int to_changed;
|
|
};
|
|
|
|
|
|
/*! \brief B channel control structure */
|
|
struct misdn_bchannel {
|
|
/*! \brief B channel send locking structure */
|
|
struct send_lock *send_lock;
|
|
|
|
#if defined(AST_MISDN_ENHANCEMENTS)
|
|
/*! \brief The BC, HLC (optional) and LLC (optional) contents from the SETUP message. */
|
|
struct Q931_Bc_Hlc_Llc setup_bc_hlc_llc;
|
|
#endif /* defined(AST_MISDN_ENHANCEMENTS) */
|
|
|
|
/*!
|
|
* \brief Dialed/Called information struct
|
|
* \note The number_type element is set to "dialplan" in /etc/asterisk/misdn.conf for outgoing calls
|
|
*/
|
|
struct misdn_party_dialing dialed;
|
|
|
|
/*! \brief Originating/Caller ID information struct
|
|
* \note The number_type element can be set to "localdialplan" in /etc/asterisk/misdn.conf for outgoing calls
|
|
* \note The number element can be set to "callerid" in /etc/asterisk/misdn.conf for outgoing calls
|
|
*/
|
|
struct misdn_party_id caller;
|
|
|
|
/*! \brief Connected-Party/Connected-Line ID information struct
|
|
* \note The number_type element can be set to "cpndialplan" in /etc/asterisk/misdn.conf for outgoing calls
|
|
*/
|
|
struct misdn_party_id connected;
|
|
|
|
/*! \brief Redirecting information struct (Where a call diversion or transfer was invoked)
|
|
* \note The redirecting subaddress is not defined in Q.931 so it is not used.
|
|
*/
|
|
struct misdn_party_redirecting redirecting;
|
|
|
|
/*! \brief TRUE if this is a dummy BC record */
|
|
int dummy;
|
|
|
|
/*! \brief TRUE if NT side of protocol (TE otherwise) */
|
|
int nt;
|
|
|
|
/*! \brief TRUE if ISDN-PRI (ISDN-BRI otherwise) */
|
|
int pri;
|
|
|
|
/*! \brief Logical Layer 1 port associated with this B channel */
|
|
int port;
|
|
|
|
/** init stuff **/
|
|
/*! \brief B Channel mISDN driver stack ID */
|
|
int b_stid;
|
|
|
|
/* int b_addr; */
|
|
|
|
/*! \brief B Channel mISDN driver layer ID from mISDN_new_layer() */
|
|
int layer_id;
|
|
|
|
/*! \brief B channel layer; set to 3 or 4 */
|
|
int layer;
|
|
|
|
/* state stuff */
|
|
/*! \brief TRUE if DISCONNECT needs to be sent to clear a call */
|
|
int need_disconnect;
|
|
|
|
/*! \brief TRUE if RELEASE needs to be sent to clear a call */
|
|
int need_release;
|
|
|
|
/*! \brief TRUE if RELEASE_COMPLETE needs to be sent to clear a call */
|
|
int need_release_complete;
|
|
|
|
/*! \brief TRUE if allocate higher B channels first */
|
|
int dec;
|
|
|
|
/* var stuff */
|
|
/*! \brief Layer 3 process ID */
|
|
int l3_id;
|
|
|
|
/*! \brief B channel process ID (1-5000) */
|
|
int pid;
|
|
|
|
/*! \brief Not used. Saved mISDN stack CONNECT_t ces value */
|
|
int ces;
|
|
|
|
/*! \brief B channel to restart if received a RESTART message */
|
|
int restart_channel;
|
|
|
|
/*! \brief Assigned B channel number B1, B2... 0 if not assigned */
|
|
int channel;
|
|
|
|
/*! \brief TRUE if the B channel number is preselected */
|
|
int channel_preselected;
|
|
|
|
/*! \brief TRUE if the B channel is allocated from the REGISTER pool */
|
|
int is_register_pool;
|
|
|
|
/*! \brief TRUE if B channel record is in use */
|
|
int in_use;
|
|
|
|
/*! \brief Time when empty_bc() last called on this record */
|
|
struct timeval last_used;
|
|
|
|
/*! \brief TRUE if call waiting */
|
|
int cw;
|
|
|
|
/*! \brief B Channel mISDN driver layer ID from mISDN_get_layerid() */
|
|
int addr;
|
|
|
|
/*! \brief B channel speech sample data buffer */
|
|
char *bframe;
|
|
|
|
/*! \brief B channel speech sample data buffer size */
|
|
int bframe_len;
|
|
int time_usec; /* Not used */
|
|
|
|
/*! \brief Not used. Contents are setup but not used. */
|
|
void *astbuf;
|
|
|
|
/*! \brief TRUE if the TE side should choose the B channel to use
|
|
* \note This value is user configurable in /etc/asterisk/misdn.conf
|
|
*/
|
|
int te_choose_channel;
|
|
|
|
/*! \brief TRUE if the call progress indicators can indicate an inband audio message for the user to listen to
|
|
* \note This value is user configurable in /etc/asterisk/misdn.conf
|
|
*/
|
|
int early_bconnect;
|
|
|
|
/*! \brief Last decoded DTMF digit from mISDN driver */
|
|
int dtmf;
|
|
|
|
/*! \brief TRUE if we should produce DTMF tones ourselves
|
|
* \note This value is user configurable in /etc/asterisk/misdn.conf
|
|
*/
|
|
int send_dtmf;
|
|
|
|
/*! \brief TRUE if we send SETUP_ACKNOWLEDGE on incoming calls anyway (instead of PROCEEDING).
|
|
*
|
|
* This requests additional INFORMATION messages, so we can
|
|
* wait for digits without issues.
|
|
* \note This value is user configurable in /etc/asterisk/misdn.conf
|
|
*/
|
|
int need_more_infos;
|
|
|
|
/*! \brief TRUE if all digits necessary to complete the call are available.
|
|
* No more INFORMATION messages are needed.
|
|
*/
|
|
int sending_complete;
|
|
|
|
|
|
/*! \brief TRUE if we will not use jollys dsp */
|
|
int nodsp;
|
|
|
|
/*! \brief TRUE if we will not use the jitter buffer system */
|
|
int nojitter;
|
|
|
|
/*! \brief Progress Indicator IE coding standard field.
|
|
* \note Collected from the incoming messages but not used.
|
|
*/
|
|
int progress_coding;
|
|
|
|
/*! \brief Progress Indicator IE location field.
|
|
* \note Collected from the incoming messages but not used.
|
|
*/
|
|
int progress_location;
|
|
|
|
/*! \brief Progress Indicator IE progress description field.
|
|
* Used to determine if there is an inband audio message present.
|
|
*/
|
|
int progress_indicator;
|
|
|
|
#if defined(AST_MISDN_ENHANCEMENTS)
|
|
/*!
|
|
* \brief TRUE if waiting for DivertingLegInformation3 to queue redirecting update.
|
|
*/
|
|
int div_leg_3_rx_wanted;
|
|
|
|
/*!
|
|
* \brief TRUE if a DivertingLegInformation3 needs to be sent with CONNECT.
|
|
*/
|
|
int div_leg_3_tx_pending;
|
|
#endif /* defined(AST_MISDN_ENHANCEMENTS) */
|
|
|
|
/*! \brief Inbound FACILITY message function type and contents */
|
|
struct FacParm fac_in;
|
|
|
|
/*! \brief Outbound FACILITY message function type and contents.
|
|
* \note Filled in by misdn facility commands before FACILITY message sent.
|
|
*/
|
|
struct FacParm fac_out;
|
|
|
|
/* storing the current AOCD info here */
|
|
enum FacFunction AOCDtype;
|
|
union {
|
|
struct FacAOCDCurrency currency;
|
|
struct FacAOCDChargingUnit chargingUnit;
|
|
} AOCD;
|
|
/*! \brief TRUE if AOCDtype and AOCD data are ready to export to Asterisk */
|
|
int AOCD_need_export;
|
|
|
|
/*! \brief Event waiting for Layer 1 to come up */
|
|
enum event_e evq;
|
|
|
|
/*** CRYPTING STUFF ***/
|
|
int crypt; /* Initialized, Not used */
|
|
int curprx; /* Initialized, Not used */
|
|
int curptx; /* Initialized, Not used */
|
|
|
|
/*! \brief Blowfish encryption key string (secret) */
|
|
char crypt_key[255];
|
|
|
|
int crypt_state; /* Not used */
|
|
/*** CRYPTING STUFF END***/
|
|
|
|
/*! \brief Seems to have been intended for something to do with the jitter buffer.
|
|
* \note Used as a boolean. Only initialized to 0 and referenced in a couple places
|
|
*/
|
|
int active;
|
|
int upset; /* Not used */
|
|
|
|
/*! \brief TRUE if tone generator allowed to start */
|
|
int generate_tone;
|
|
|
|
/*! \brief Number of tone samples to generate */
|
|
int tone_cnt;
|
|
|
|
/*! \brief Current B Channel state */
|
|
enum bchannel_state bc_state;
|
|
|
|
/*! \brief This is used as a pending bridge join request for when bc_state becomes BCHAN_ACTIVATED */
|
|
enum bchannel_state next_bc_state;
|
|
|
|
/*! \brief Bridging conference ID */
|
|
int conf_id;
|
|
|
|
/*! \brief TRUE if this channel is on hold */
|
|
int holded;
|
|
|
|
/*! \brief TRUE if this channel is on the misdn_stack->holding list
|
|
* \note If TRUE this implies that the structure is also malloced.
|
|
*/
|
|
int stack_holder;
|
|
|
|
/*!
|
|
* \brief Put a display ie in the CONNECT message
|
|
* \details
|
|
* Put a display ie in the CONNECT message containing the following
|
|
* information if it is available (nt port only):
|
|
* 0 - Do not put the connected line information in the display ie.
|
|
* 1 - Put the available connected line name in the display ie.
|
|
* 2 - Put the available connected line number in the display ie.
|
|
* 3 - Put the available connected line name and number in the display ie.
|
|
*/
|
|
int display_connected;
|
|
|
|
/*!
|
|
* \brief Put a display ie in the SETUP message
|
|
* \details
|
|
* Put a display ie in the SETUP message containing the following
|
|
* information if it is available (nt port only):
|
|
* 0 - Do not put the caller information in the display ie.
|
|
* 1 - Put the available caller name in the display ie.
|
|
* 2 - Put the available caller number in the display ie.
|
|
* 3 - Put the available caller name and number in the display ie.
|
|
*/
|
|
int display_setup;
|
|
|
|
/*!
|
|
* \brief Select what to do with outgoing COLP information.
|
|
* \details
|
|
* 0 - pass (Send out COLP information unaltered.)
|
|
* 1 - restricted (Force COLP to restricted on all outgoing COLP information.)
|
|
* 2 - block (Do not send COLP information.)
|
|
*/
|
|
int outgoing_colp;
|
|
|
|
/*! \brief User set presentation restriction code
|
|
* 0=Allowed, 1=Restricted, 2=Unavailable
|
|
* \note It is settable by the misdn_set_opt() application.
|
|
*/
|
|
int presentation;
|
|
|
|
/*! \brief TRUE if the user set the presentation restriction code */
|
|
int set_presentation;
|
|
|
|
/*! \brief Notification indicator ie description code */
|
|
enum mISDN_NOTIFY_CODE notify_description_code;
|
|
|
|
/*! \brief SETUP message bearer capability field code value */
|
|
int capability;
|
|
|
|
/*! \brief Companding ALaw/uLaw encoding (INFO_CODEC_ALAW / INFO_CODEC_ULAW) */
|
|
int law;
|
|
|
|
/* V110 Stuff */
|
|
/*! \brief Q.931 Bearer Capability IE Information Transfer Rate field. Initialized to 0x10 (64kbit). Altered by incoming SETUP messages. */
|
|
int rate;
|
|
|
|
/*! \brief Q.931 Bearer Capability IE Transfer Mode field. Initialized to 0 (Circuit). Altered by incoming SETUP messages. */
|
|
int mode;
|
|
|
|
/*! \brief Q.931 Bearer Capability IE User Information Layer 1 Protocol field code.
|
|
* \note Collected from the incoming SETUP message but not used.
|
|
*/
|
|
int user1;
|
|
|
|
/*! \brief Q.931 Bearer Capability IE Layer 1 User Rate field.
|
|
* \note Collected from the incoming SETUP message and exported to Asterisk variable MISDN_URATE.
|
|
*/
|
|
int urate;
|
|
|
|
/*! \brief TRUE if call made in digital HDLC mode
|
|
* \note This value is user configurable in /etc/asterisk/misdn.conf.
|
|
* It is also settable by the misdn_set_opt() application.
|
|
*/
|
|
int hdlc;
|
|
/* V110 */
|
|
|
|
/*! \brief Display message that can be displayed by the user phone.
|
|
* \note Maximum displayable length is 34 or 82 octets.
|
|
* It is also settable by the misdn_set_opt() application.
|
|
*/
|
|
char display[84];
|
|
|
|
/*! \brief Q.931 Keypad Facility IE contents
|
|
* \note Contents exported and imported to Asterisk variable MISDN_KEYPAD
|
|
*/
|
|
char keypad[MISDN_MAX_KEYPAD_LEN];
|
|
|
|
/*! \brief Current overlap dialing digits to/from INFORMATION messages */
|
|
char info_dad[MISDN_MAX_NUMBER_LEN];
|
|
|
|
/*! \brief Collected digits to go into info_dad[] while waiting for a SETUP_ACKNOWLEDGE to come in. */
|
|
char infos_pending[MISDN_MAX_NUMBER_LEN];
|
|
|
|
/* unsigned char info_keypad[MISDN_MAX_KEYPAD_LEN]; */
|
|
/* unsigned char clisub[24]; */
|
|
/* unsigned char cldsub[24]; */
|
|
|
|
/*! \brief User-User information string.
|
|
* \note Contents exported and imported to Asterisk variable MISDN_USERUSER
|
|
* \note We only support ASCII strings (IA5 characters).
|
|
*/
|
|
char uu[256];
|
|
|
|
/*! \brief User-User information string length in uu[] */
|
|
int uulen;
|
|
|
|
/*! \brief Q.931 Cause for disconnection code (received)
|
|
* \note Need to use the AST_CAUSE_xxx code definitions in causes.h
|
|
*/
|
|
int cause;
|
|
|
|
/*! \brief Q.931 Cause for disconnection code (sent)
|
|
* \note Need to use the AST_CAUSE_xxx code definitions in causes.h
|
|
* \note -1 is used to suppress including the cause code in the RELEASE message.
|
|
*/
|
|
int out_cause;
|
|
|
|
/* struct misdn_bchannel hold_bc; */
|
|
|
|
/** list stuf **/
|
|
|
|
#ifdef MISDN_1_2
|
|
/*! \brief The configuration string for the mISDN dsp pipeline in /etc/asterisk/misdn.conf. */
|
|
char pipeline[128];
|
|
#else
|
|
/*! \brief TRUE if the echo cancellor is enabled */
|
|
int ec_enable;
|
|
|
|
/*! \brief Number of taps in the echo cancellor when enabled.
|
|
* \note This value is user configurable in /etc/asterisk/misdn.conf (echocancel)
|
|
*/
|
|
int ec_deftaps;
|
|
#endif
|
|
|
|
/*! \brief TRUE if the channel was allocated from the available B channels */
|
|
int channel_found;
|
|
|
|
/*! \brief Who originated the call (ORG_AST, ORG_MISDN)
|
|
* \note Set but not used when the misdn_set_opt() application enables echo cancellation.
|
|
*/
|
|
int orig;
|
|
|
|
/*! \brief Tx gain setting (range -8 to 8)
|
|
* \note This value is user configurable in /etc/asterisk/misdn.conf.
|
|
* It is also settable by the misdn_set_opt() application.
|
|
*/
|
|
int txgain;
|
|
|
|
/*! \brief Rx gain setting (range -8 to 8)
|
|
* \note This value is user configurable in /etc/asterisk/misdn.conf.
|
|
* It is also settable by the misdn_set_opt() application.
|
|
*/
|
|
int rxgain;
|
|
|
|
/*! \brief Next node in the misdn_stack.holding list */
|
|
struct misdn_bchannel *next;
|
|
};
|
|
|
|
|
|
extern enum event_response_e (*cb_event) (enum event_e event, struct misdn_bchannel *bc, void *user_data);
|
|
|
|
extern void (*cb_log) (int level, int port, char *tmpl, ...)
|
|
__attribute__ ((format (printf, 3, 4)));
|
|
|
|
extern int (*cb_jb_empty)(struct misdn_bchannel *bc, char *buffer, int len);
|
|
|
|
struct misdn_lib_iface {
|
|
enum event_response_e (*cb_event)(enum event_e event, struct misdn_bchannel *bc, void *user_data);
|
|
void (*cb_log)(int level, int port, char *tmpl, ...)
|
|
__attribute__ ((format (printf, 3, 4)));
|
|
int (*cb_jb_empty)(struct misdn_bchannel *bc, char *buffer, int len);
|
|
};
|
|
|
|
/***** USER IFACE **********/
|
|
|
|
void misdn_lib_nt_keepcalls(int kc);
|
|
|
|
void misdn_lib_nt_debug_init( int flags, char *file );
|
|
|
|
int misdn_lib_init(char *portlist, struct misdn_lib_iface* iface, void *user_data);
|
|
int misdn_lib_send_event(struct misdn_bchannel *bc, enum event_e event );
|
|
void misdn_lib_destroy(void);
|
|
|
|
void misdn_lib_isdn_l1watcher(int port);
|
|
|
|
void misdn_lib_log_ies(struct misdn_bchannel *bc);
|
|
|
|
char *manager_isdn_get_info(enum event_e event);
|
|
|
|
struct misdn_bchannel* misdn_lib_get_free_bc(int port, int channel, int inout, int dec);
|
|
#if defined(AST_MISDN_ENHANCEMENTS)
|
|
struct misdn_bchannel *misdn_lib_get_register_bc(int port);
|
|
#endif /* defined(AST_MISDN_ENHANCEMENTS) */
|
|
|
|
void manager_bchannel_activate(struct misdn_bchannel *bc);
|
|
void manager_bchannel_deactivate(struct misdn_bchannel * bc);
|
|
|
|
int misdn_lib_tx2misdn_frm(struct misdn_bchannel *bc, void *data, int len);
|
|
|
|
void manager_ph_control(struct misdn_bchannel *bc, int c1, int c2);
|
|
|
|
void isdn_lib_update_rxgain (struct misdn_bchannel *bc);
|
|
void isdn_lib_update_txgain (struct misdn_bchannel *bc);
|
|
void isdn_lib_update_ec (struct misdn_bchannel *bc);
|
|
void isdn_lib_stop_dtmf (struct misdn_bchannel *bc);
|
|
|
|
int misdn_lib_port_restart(int port);
|
|
int misdn_lib_pid_restart(int pid);
|
|
int misdn_lib_send_restart(int port, int channel);
|
|
|
|
int misdn_lib_get_port_info(int port);
|
|
|
|
int misdn_lib_is_port_blocked(int port);
|
|
int misdn_lib_port_block(int port);
|
|
int misdn_lib_port_unblock(int port);
|
|
|
|
int misdn_lib_port_is_pri(int port);
|
|
int misdn_lib_port_is_nt(int port);
|
|
|
|
int misdn_lib_port_up(int port, int notcheck);
|
|
|
|
int misdn_lib_get_port_down(int port);
|
|
|
|
int misdn_lib_get_port_up (int port) ;
|
|
|
|
int misdn_lib_maxports_get(void) ;
|
|
|
|
struct misdn_bchannel *misdn_lib_find_held_bc(int port, int l3_id);
|
|
void misdn_lib_release(struct misdn_bchannel *bc);
|
|
|
|
int misdn_cap_is_speech(int cap);
|
|
int misdn_inband_avail(struct misdn_bchannel *bc);
|
|
|
|
void manager_ec_enable(struct misdn_bchannel *bc);
|
|
void manager_ec_disable(struct misdn_bchannel *bc);
|
|
|
|
void misdn_lib_send_tone(struct misdn_bchannel *bc, enum tone_e tone);
|
|
|
|
void get_show_stack_details(int port, char *buf);
|
|
|
|
|
|
void misdn_lib_tone_generator_start(struct misdn_bchannel *bc);
|
|
void misdn_lib_tone_generator_stop(struct misdn_bchannel *bc);
|
|
|
|
|
|
void misdn_lib_setup_bc(struct misdn_bchannel *bc);
|
|
|
|
void misdn_lib_bridge( struct misdn_bchannel * bc1, struct misdn_bchannel *bc2);
|
|
void misdn_lib_split_bridge( struct misdn_bchannel * bc1, struct misdn_bchannel *bc2);
|
|
|
|
void misdn_lib_echo(struct misdn_bchannel *bc, int onoff);
|
|
|
|
int misdn_lib_is_ptp(int port);
|
|
int misdn_lib_get_maxchans(int port);
|
|
|
|
void misdn_lib_reinit_nt_stack(int port);
|
|
|
|
#define PRI_TRANS_CAP_SPEECH 0x0
|
|
#define PRI_TRANS_CAP_DIGITAL 0x08
|
|
#define PRI_TRANS_CAP_RESTRICTED_DIGITAL 0x09
|
|
#define PRI_TRANS_CAP_3_1K_AUDIO 0x10
|
|
#define PRI_TRANS_CAP_7K_AUDIO 0x11
|
|
|
|
|
|
|
|
char *bc_state2str(enum bchannel_state state);
|
|
void bc_state_change(struct misdn_bchannel *bc, enum bchannel_state state);
|
|
|
|
void misdn_dump_chanlist(void);
|
|
|
|
void misdn_make_dummy(struct misdn_bchannel *dummybc, int port, int l3id, int nt, int channel);
|
|
|
|
|
|
#endif /* TE_LIB */
|